Follow Slashdot blog updates by subscribing to our blog RSS feed

 



Forgot your password?
typodupeerror
×
Science

Fusion Gets Closer With Magnetic Field Correction 336

jparadise writes: "Seems folks over at the the U.S. National Fusion Facility in San Diego have figured out a way to fiddle with magnets to contain plasma and make their scale-model fusion generator produce energy significantly in excess of what they're putting in. It's not the final answer, doesn't look like, but it seems (maybe? hopefully?) like a step in the right direction ..."
This discussion has been archived. No new comments can be posted.

Fusion Gets Closer With Magnetic Field Correction

Comments Filter:
  • by Anonymous Coward on Monday July 16, 2001 @08:32AM (#81816)
    So it looks technically feasible after all. Since the first experiments most people have been thinking you can't get more out of fusion than you put into it. It's interesting since the physical laws behind fusion power aren't exactly known and thus it isn't really possible to prove how much is the theoretical maximum that fusion can deliver. We can look at the sun for one example, but you can't have a power plant that big on Earth. (The same goes for superconductivity, no one knows whether it's possible to achieve under room temperature)
    Maybe now the scientists can get some real funding out of their governments... after the cold war projects that require huge amounts of effort like the creation of the nuclear bomb and moon travel have been kinda gone. I wonder what the world would be like if the soviet union hadn't collapsed and flexing of the superpower's muscles had poured in the same amounts of money into science that they did 50 years ago...
  • by Anonymous Coward on Monday July 16, 2001 @08:38AM (#81817)

    Exactly how would clustering fusion reactors that don't give out more energy than is put in help? Power plants in general are more efficient the bigger they are.

    For instance, people keep whining about electric cars with the argument that the energy must be produced elsewhere and that makes pollution - but the power that is lost in transmission of the energy is easily gained by the increase of efficiency when using huge power plants instead of a small one in every car.

    Energy production just isn't the same as computer power. Computers become less effective when they get hot, power plants get more effective :) This is a fundamental law of thermodynamics.

  • It seems that if current expiremental reactors are producing just more energy than is put in (say maybe 1.1x), this new reactor will produce four times the energy (4.4x) with a net energy gain of ((4.4-1)/(1.1-1)) or 34 times more usable output energy. This seems like a pretty major breakthrough.
  • Just how keen do you think these guys are going to be to fund something that threatens the way people like them become millionaires?

    On the other hand, these people are "old money". Their families (and their family's lawyers and portfolio managers) didn't get that way thinking short term.

  • maybe they can make them small enough to power my Honda!
  • Probably takes them in a car, too.
  • by TheSync ( 5291 ) on Monday July 16, 2001 @12:53PM (#81830) Journal
    Are there any fusion protest groups yet?

    Against the National Ignition Facility [igc.org]

    "Friends of the Earth" Europe [commondreams.org] say: "The commercial use of nuclear fusion is pure fantasy. Already 25 years ago the same people had predicted that in 50 years fusion would be a viable energy resource, but it seems like we are always 50 years away from fusion becoming economic. The European Council has to stop this waste of millions of taxpayers money."

    Green groups say Fusion is a Scam [eastnorthumberland.com]

    "Friends" of the Earth [foe.org] wants to "Terminate existing tokamak reactors, cancel construction of the similar spherical torus reactor, and adhere to a withdrawal from the International Thermonuclear Experimental Reactor (ITER) program."

    Sierra Club [sierraclub.org] The dangers posed by the probable releases of tritium used by fusion plants, the problems with decommissioning these plants, and their high costs lead the Sierra Club to believe that the development of fusion reactors to generate electricity should not be pursued at this time.
  • That is, the one between the end of petrochemical-based energy and the advent of sustainable fusion. And whether we're saved or damned as a technologically based culture depends on which alternative gets here first.

    In other words, either we get cheap, clean, nearly free unlimited energy, or our future is gonna look uncomfortably like those Mad Max movies.

  • It's hardly worthless, just less informative than it could be. There is enough information to conclude that they more than broke even.

    First, previous research broke even but could not get much past that. This new technique produces four times as much fusion, but uses a very small amount of additional energy. Qualitatively, that is enough to conclude that it is well past breaking even.
  • since aquiring another neutron would make U-238 into U-239, NOT Pu-239. Unless the article meant protons, but I wouldn't believe anything someone says about fission if they can't keep neutrons and protons straight.
  • Deuterium (Hydrogen with another Neuron)

    Smarter Hydrogen? What's next? Intelligent Methane? *brrrap* 'scuse me.

  • Perhaps... Heat Pollution would become a problem, but hopefully that would be worse than greenhouse-effect causing gasses that we release by Fossile fuels, if such gasses do in fact cause global warming (of which I'm not fully convinced.)

    Getting rid of excess heat is easy enough if you decide to spend the money to do it - just set up a solar heat plant, point the mirrors at a patch of empty sky, and run it in reverse (use a heat exchanger to heat the working fluid from your waste heat, run it through the pipes in the mirror array, and let it beam its blackbody radiation out into space).

    Yes, it takes a fair bit of power to move heat across this big a temperature differential (you need to heat the pipes up until they're glowing orange to get a decent rate of heat transfer). However, you'd only need to do it in the first place if you had power to burn.

    To prevent confused responses - you're not building a giant toaster-oven. The heat you're stuffing into the pipes comes from the city or industrial park you want to cool off, via heat exchanger. You're not generating it from scratch.
  • The downsides are that the D/He-3 reaction has a higher energy threshold, so it requires a better confined plasma to make D/He-3 energy production plausible. Also, the supplies of He-3 on Earth are limited. Of course this disadvantages leads to a interesting convergence of interest between fusion research and space exploration. There's plenty of He-3 (deposited from the solar wind) on the moon. So He-3 mining could be powerful reason to maintain a base on the moon.

    I'd understood that He3 was one of the decay products that you get from neutron irradiation of a fusion reactor's lithium blanket. A few other articles that I'd read claimed that this was the main reason a lithium blanket was used (the idea was that a H2/H3 plasma fusing would transmute enough of the blanket into He3 to provide H2/He3 burning for power generation).

    Is this still a viable option, or has it been shown to be impractical?
  • Let that stream of plasma impact some new magnetic fields. It will push on the field lines, imparting momentum to them. This could accelerate the magnets generating those lines, even if they were on the other side of the wall. If those magnets were attached to wheels, could you actually make a "magnetic turbine", directly converting the kinetic energy of the plasma into mechanical work?

    Maybe a real physicist can enlighten me... Is this possible?


    I'm not a real physicist either, but I faked being one well enough to get a free vacation out of it (IPhO ...'94? '95? can't remember) :).

    It turns out that you can get electrical power directly from a plasma stream by the Hall effect (similar to what you describe). Fire a stream of plasma through a magnetic field that's perpendicular to the direction of plasma motion, and you'll get negative charges deflected one way and positive charges deflected another way. Put electrodes beside the plasma stream to collect the charge, and you have a power source. Look up "magnetohydrodynamic generators" in your favourite encyclopedia for more information.

    As for fusion plants, the best approach to tapping power that I've heard of is to put a big block of lead or concrete around the reactor, let it heat up from absorbing gamma rays and other crud coming out of the plasma, and run steam turbines off of it.
  • Current fusion engineering designs call for deuterium and tritium to be used as the fuel. You can easily get a virtually inexhaustible supply of deuterium from seawater. Tritium is another matter altogether. The only source available for this is fission reactors.

    A fusion reactor would produce more than enough neutrons to breed tritium (and hopefully helium-3 as well).
  • And don't forget the other things that are petroleum based - the industrial chemical industry , the plastics industry, and the fertilizer industry to name a few - when oil gets scarce (coming soon) everythings gets expensive.

    Plastics can be produced from anything hydrocarbon-based. You can already do it easily from plant matter - petroleum just happens to be cheaper for the time being. Ditto most organic chemicals used in industry. Most fertilizers that I know of are based on minerals, not petroleum (a fertilizer provides mostly nitrogen, phosphorus, and potassium to plants, none of which petroleum is terribly rich in; typical fertilizers are based ammonium nitrate, potassium nitrate, or pick-a-random-phosephate, if I understand correctly).

    Nothing that oil fields are vital for.
  • No, they won't. If energy becomed more expensive, people would just return to nuclear power. If you think that people are going to resign from driving, driers and air-conditioners, you're insane.

    If it's forced on them incrementally, I think they might. Especially since the alternative with or without fusion power is to have an Evil Nuclear Plant right next to their city (fusion isn't much cleaner than fission for low-level waste).

    It's a case of foolishness (hopefully) defeating foolishness.
  • Please, do not use all the water in the oceans just for fueling the fusion in those power plants... We (mankind) need it as long as we want to actually LIVE on this planet...

    You'd only need to take the deuterium for the first million years. Removing 1/7000 of the oceans' water would not cause substantial problems.
  • Pretty interesting idea. But that patch of empty sky is actually full of a lot of air. The heat has to pass through a lot of air before it gets free in space. Since conduction and convection are much more effective than radiation at transmitting heat, wouldn't you just end up making your local chunk of the atmosphere very warm?

    Heat lost by radiation goes up as the fourth power of temperature - this is why you'd have the coolant hot enough to glow orange :). As you raise the temperature, radiative cooling starts to dominate (transfer by conduction goes up linearly with the temperature difference).

    If I understand correctly, the atmosphere's pretty good at blocking light in the thermal IR band, but you can see by example that visible and near-visible passes through quite easily - most of the sunlight shining on earth reaches the ground.

    Heat the coolant up to a thousand degrees centigrade or so, and most of its emission will be in visible and near-IR (thermal IR is the band that objects at room temperature shine in).

    Now, a week of cloudy days would make this system less effective, but you could get around that by using a nearby lake for heat storage until the sky clears again (though that won't be very nice for the inhabitants of the lake).
  • by Christopher Thomas ( 11717 ) on Monday July 16, 2001 @07:42PM (#81854)
    Bottom line, if someone can come up with a cheap/light way to store electricity (either through a flywheel or through a superconducting coil), we'll still keep boosting my Exxon stock. And we'll do it by drilling in your backyard.

    Fuel cells for cell phones should be appearing within the next 2-5 years or so. Prototypes already exist, and energy density is almost as good as a chemical fuel.

    Fuel cells at present are a pain for things like cars because storing the hydrogen they use is very annoying (it's nowhere near as dense as a liquid). However, fuel cells that can process methanol are buildable, and will IMO probably be what brings fuel cell cars into the real world. Or you could just pump methanol into an interal combustion engine made of ceramics or otherwise made corrosion-resistant.

    Methanol can't be easily produced by "recharging" fuel cells (unlike hydrogen), but you can make it by fermenting plants or by direct synthesis (burn CO2 incompletely in a hydrogen atmosphere and use fractional distillation on the combustion products).

    In summary, power storage won't be a problem for long.
  • by Christopher Thomas ( 11717 ) on Monday July 16, 2001 @07:55PM (#81855)
    anyone with a tenth of an IQ point knows that fusion is clean and safe, unlike fission.

    Fusion is certainly safer than fission from a high-level waste point of view, but how exactly do you propose to prevent the reactor vessel from becoming radioactive? Even "relatively few" neutrons is enough to cause major headaches for disposal of replaced parts for a multi-gigawatt reactor.

    Claiming that it's perfectly clean will only make backlash worse when the public finally clues in. Remember when fission power was supposed to be safe and clean?
  • by Christopher Thomas ( 11717 ) on Monday July 16, 2001 @09:01AM (#81856)
    What about the supply of deuterium? It's not perpetual...

    It's close enough to perpetual that it makes no difference.

    About 1 hydrogen atom in 7000 is deuterium. Hydrogen accounts for 1/9th the mass of water, which means that the mass of deuterium we could extract from the oceans is about 1/63000th the mass of the oceans.

    Assuming an average depth of about 3km and a coverage of 2/3 of the Earth's surface, you have about 1e18 tonnes of water on the planet. Let's say 1e-5 of that is deuterium that you can easily extract, and you get 1e13 tonnes of deuterium.

    Fusion is about 1% efficient at turning mass into energy. Let's say that your fusion reactor is 0.01% efficient in total (pessimistic estimate). This gives about 1e13 J/kg, or 1e16 J/tonne.

    The total amount of energy we could extract from fusing the oceans' deuterium with these fairly inefficient fusion plants is about 1e29 J.

    If we want our fuel supply to last a million years, that gives a world power consumption of 3e15 watts. Far, far more than we consume now.

    If, within the next million years, we build reactors good enough to fuse light hydrogen, we'll have enough fuel to last us until the sun burns out (several billion years). Or we could just ship in deuterium from elsewhere in the solar system. Either way, barring a *huge* population expansion, we won't run out of power - ever.
  • by Christopher Thomas ( 11717 ) on Monday July 16, 2001 @09:09AM (#81857)
    In other words, either we get cheap, clean, nearly free unlimited energy, or our future is gonna look uncomfortably like those Mad Max movies.

    Actually, what would be more likely to happen is a slow and painful shift to renewable forms of energy and a lifestyle that consumes less power.

    Fossil fuels won't run out all at once - they'll get incrementally more expensive as they become scarcer and more difficult to extract. As price climbs, people will out of necessity start using less power, and alternative forms of power generation will become cost-competitive (even if their own cost doesn't change).

    You'll see more houses with photocell shingles. You'll see a mirror-based heat plant or a wind farm next to most cities. More people will take public transit, because it's cheaper than driving. House design will depend more on passive heating/cooling and good insulation than on furnaces and air conditioners (they'll still be used; just on lower settings). People will have to hang-dry their clothes instead of tossing them in the drier. And so forth.

    A Mad Max style catastrophy would only happen if energy supplies ran out all at once. A nuclear war or an asteroid strike could cause this, but I doubt fossil fuel problems will.
  • by Christopher Thomas ( 11717 ) on Monday July 16, 2001 @09:38AM (#81858)
    ok, so you have this plasma "floating" in the bottle at 12 gazillion degrees. the power goes out. doesn't your ball of plasma just eat it's way through anything it touches and head towards the center of the earth?

    The plasma is very hot, but also very tenuous. You might have a few thousanths of a gram of matter in the reactor. As soon as this touches the reactor wall, it cools down to room temperature. Your reactor wall gets warm. That's about it.

    Also, as your plasma is much less dense than air, if anything, a ball of plasma would rise.

    You'd never get a ball. What happens is that as the containment field weakens, the donut-shaped mass of plasma expands until it touches the side of the container. In theory, if you had a "hole" in the containment field instead of the whole thing weakening, you could get a jet of what looks like flame, but this is next to impossible to do even if you're _trying_. The natural shape of the field is more-or-less uniform.

    Plasma is just a hot, conducting gas. It follows gas law like everything else.
  • by davebo ( 11873 ) on Monday July 16, 2001 @08:45AM (#81859) Journal
    Of course, a quick search by everyone's favorite search engine [google.com] would have answered your question, but I'll do the dirty work for you.

    This site [fusion.org.uk] gives a general overview of current fusion studies.

    For the more technically inclined, you can check out the journal Fusion Engineering and Design [sciencedirect.com] (Sorry - if the link doesn't work for you, it's probably a pay-per-access journal and your business/school/self isn't a subscriber). Anyway, it's full of juicy fusion engineering and design details.

  • The byproducts of fusion are excess neutrons that
    convert any materials around them into dangerous
    radioactive isotopes. Fission reactors have
    internal shields to capture execess neutrons,
    but none of the fusin designs have such yet.
  • Well, if the fusion reactor uses D/He-3 fusion mentioned elsewhere in commments here) instead of D/T, then it is possible to avoid the steam cycle. D/He-3 reactions yields a proton (instead of a neutron) as one of the products. The electrical charge of the proton can be used to trap its energy electrical, and avoid the step of heating water.

    --
    I hope we shall crush in its birth the aristocracy of our monied corporations ...
  • by gorgon ( 12965 ) on Monday July 16, 2001 @10:47AM (#81866) Homepage Journal
    The problems you describe with neutrons are limited to fusion reactors that rely on Deuterium/Tritium fusion, which produces neutrons as a product. Deuterium/Helium-3 fusion produces protons instead of neutrons (D + He-3 -> p + He-4). It would be much easier to harvest the energy from D/He-3 fusion and the reactions involves less radioactivity.

    The downsides are that the D/He-3 reaction has a higher energy threshold, so it requires a better confined plasma to make D/He-3 energy production plausible. Also, the supplies of He-3 on Earth are limited. Of course this disadvantages leads to a interesting convergence of interest between fusion research and space exploration. There's plenty of He-3 (deposited from the solar wind) on the moon. So He-3 mining [asi.org] could be powerful reason to maintain a base on the moon.

    --
    I hope we shall crush in its birth the aristocracy of our monied corporations ...

  • by joshv ( 13017 ) on Monday July 16, 2001 @10:16AM (#81867)
    Why the hell are we working on making our own self contained fusion reactions when we have the solar system's largest self sustaining fusion reaction going on not 93 million miles away?

    99.99999% of the sun's energy output flows, wasted, into the interstellar depths. A tiny fraction of this energy falls on our planet's surface and is used by us (either in stored form as fossil fuels, or more or less directly as solar, wind, etc...)

    Ultimately the only real solution to our energy woes lies in figuring out how to catch just a little extra sunlight, convert it into usable forms of energy and move it to the Earth's surface.

    Solar satellites are the answer. We have the technology now. We know how to make it work now. People have been designing complete, workable systems that use nothing more than existing technology for the last quarter century. Why aren't we funding them instead of this pie in the sky "always another two decades off" technology.

    Certainly our skills in manipulating hot plasmas will eventually reach the point where a Fusion plant will become feasible. But by that time we could have built and launched an entire fleet of solar satellites, or paved over every major desert with solar tiles or reflecting concentrators.

    -josh
  • Well, except for the heat and the radiation, possibly. OTOH, I'm not sure that intense magnetic fields over long periods of time are all that safe, either.... Wasn't there something about that encouraging cancer?


    Caution: Now approaching the (technological) singularity.
  • ok, so you have this plasma "floating" in the bottle at 12 gazillion degrees. the power goes out. doesn't your ball of plasma just eat it's way through anything it touches and head towards the center of the earth?

    No. The only thing keeping the temperature high is the containment. If the containment is lost, the fusion stops (and the net energy output stops) and the plasma expands and cools.

    Exercise for the student: Review the ideal gas law (PV=nRT) and calculate the temperature of a 1 million degree plasma as it expands from a volume of 1 m^3 to 10^3 m^3 and reduces in pressure from 3 million atmospheres to 1 atmosphere.
  • by sharkey ( 16670 ) on Monday July 16, 2001 @09:27AM (#81874)
    I just copied the (nuclear) plant we have now. Then, I added some fins to lower wind resistance. And this racing stripe here I feel is pretty sharp.

    --Homer Simpson

    --
  • Where in the article does it say they've made a scale model produce more energy than they're putting in? They haven't; they've just overcome one obstacle, out of many.

    They found a new method of enhancing plasma containment, and they've tested it, and it works... it in no way means they produce more energy than they use; the second they do that, we're in the fusion business... even if it's a very small margin.
  • But current experimental reactors aren't doing any such thing... we're not at breakeven yet.
  • The article actually says nothing about getting an excess of power out of anything.... other than stating that hitting the 'break-even' point is the current goal of fusion research.
    Dunno where they got that terribly misleading statement from.

    You are right; as soon as we have a power excess, we're in business.
  • With a fission reactor, if there is a problem, you drop the control rods and everything comes to a halt.

    With a fusion reactor, what would happen if you completely lost power to the magnetic fields? Would it blow up like a H-bomb or at least level the building? People aren't going to allow these kinds of plants to be built unless they are as safe or safer than fission plants.

    -B
  • Actually no the containment is fairly energy cheap, the real problem is the startup energy versus the energy it creates. Basically to start a fusion reaction you basically need a huge energy burst, essentially a nuke. But small fusion reactors do not give off even the amount of energy of a nuke, so you actually used more energy to start the reaction than you got out of it. Then you have very large reactors like the sun, which while its very energy expensive to start, it virtually last forever and the ratio of start energy to output is very good. But the problem is figuring out how to contain a large reactor, and this is a way that has been proposed of containing a reaction that is large enough to give a positive output versus input.
  • Actually I wasn't quite telling you the whole story, while the size thing is true, also you can have a smaller container that "burns" much hotter, which will also produce a positive output, containing that is a different type of challenge, and that is the aim the MFC it appears. Sorry I really didn't get a chance to read the article as its highly slashdotted, and my brain much have been elsewhere :(

  • I remember reading a while back (2 years+?) that the Tokamok reactor had generated it's first power in a microsecond burst or something, and I think that was the first power generated by a controlled fusion reaction.

    Then I heard nothing. I kind of thought we were moving into an area of engineering improvement with fusion, meaning the major problems were solved and we were just trying to figure out how to make it feasible. I guess that isn't the case.

    Does anyone have any good links for the state of fusion research?

    Thanks.
  • The absolute worst-case scenario for a magnetic containment fusion reactor is an explosion that levels the building it's in. This would not be caused by a loss of power to the magnetic fields; it would have to be a specific imbalance in the fields that focussed the plasma into the wall of the unit. Just turning off the fields would cause the reaction to grind to a halt, possibly flash-destroying the interior of the containment vessel but probably not affecting anything outside.

    Of course there are radioactive hazards. The most radioactive substance in the process is the Lithium used to line the reactor walls as a neutron shield, but as a solid metal lithium is not likely to cause a problem. Most likely to escape is the Tritium, an isotope of hydrogen that's very hard to contain. But tritium gas is a very low risk substance, with a half-life of 12 days. It's not a big worry.

    Fusion power is nowhere near as dangerous as fission.
  • WRONG

    They have all been fission/fusion hybrids - Fission as the trigger to ignite the hydrogen FUSION device
  • True - I was not counting old weapons, small weapons etc. I was just trying to point out that fusion systems exist
  • The physical laws are very well known. It's actually a very trivial thing to derive the fusion of hydrogen to helium, and it's energy output, from the basic laws. What we don't currently know is how to do it on a small scale, without putting in more energy than we get out.
  • Check with the military. I shared a lot of upper-division/graduate physics and math classes with officers at the Orlando Naval Training Center (now closed, iirc). I can't remember if they were on the nuclear officer track, or already certified and in Orlando to train recruits.

    Anyway, they knew how something about naval propulsion with nuclear-fired steam turbines. I made the mistake of making some comment about the "steam" coming from the tea kettle one time, and got a quick lecture on what happens when superheated steam hits human flesh. It's not pretty.
  • by coyote-san ( 38515 ) on Monday July 16, 2001 @08:52AM (#81906)
    So how would you convert the energy produced into electricity?

    Steam turbines might seem archaic, but they're still used for the simple reasons that they're a well-proven technology and high pressure steam contains a *lot* more energy per unit volume than pretty much anything else in routine use. (After whatever heats the water in the first place, of course!)

    Remember, the plume of vapor over your tea kettle on the stove is not steam. It's water vapor condensed from a very small amount of steam. Steam is invisible, and tends to do things like fling heavy fighter aircraft off of flight decks or instantly cut people in half if they walk in front of a pinhole leak.
  • Somewhere in my decade-old collection of Analog SciFi magazines, there's a story about this very problem. Seems that the main characters were having trouble with their respective projects:

    a) One couldn't get his AI beyond the three-year-old level. It was blazingly fast, but refused to mature.
    b) The other couldn't get his torus to manipulate its magnetic fields fast enough to maintain the fusion.

    Sound familiar? Of course, the solution was simple: The AI guy handed off his project to the fusion guy, and overnight the problem was solved! When toddlers try to eat something they don't like, they push it around with their tongue and teeth and try to swallow without letting it touch the sides of their mouth...so he put the AI in charge of the fields and programmed it to hate the taste of plasma!!

    God, I miss that mag. I should look into a subscription...
    ------------------------

  • by InterGuru ( 50986 ) <`jhd' `at' `interguru.com'> on Monday July 16, 2001 @09:11AM (#81913)

    I post this as a former fusion researcher and a former project manager for the Office of Fusion Energy (OFE) of the Department of Energy (DOE)

    Many decades ago the international fusion community put all of its chips on the Tokamak. It has been a disaster.

    Even if a Tokamak could produce break-even fusion ( getting more energy out than you put in) the engineering obstacles to creating an economically successful reactor are daunting.

    Many years ago, the OFE sponsored a study, Project Aries, of the costs of a Tokamak reactor. Even using the usual optimistic assumptions, the cost came in way above solar and wind power, let alone fossil fuels.

    Another symptom of the problem is that three times in a row, projects to build larger Tokamak have collapsed in the design stage. That is, even before anything was build, none could come up with a working design. The International Thermonuclear Experimental Reactor (ITER), the latest attempt, collapsed as the price tag spiraled above $20 billion (US)

    The whole OFE degenerated into a "you scratch my back and I'll scratch yours" process where the lab directories divvied up the pie. All non-Tokamak ideas were cut off, including the one I worked on.( more below).Congress cut the OFE budget almost in half a few years ago in response to this.

    That being said, I respect the findings of the DIII-D team. The DIII-D is very well run research project, the their accomplishment is to be applauded. Now for a blatant plug. In the 70s I worked on a small project at the University of Miami, the Trisops project, which was defunded. The amount of money was not an issues ( our request was quite small), but the non-Tokamak nature, and the nerve of the principal investigator, Dan Wells, to point out that the Tokamac was unworkable.

    The Trisops machine was recently moved from the University of Miami, to Lanham Md, with a small NASA grant, but there is not money to run it. You can see a report [aps.org] on it.

    Another interesting project, the Plasmak [neoteric-research.org](TM) project that is being run by Paul Koloc ( out of his garage!!).

    The holy grail on fusion research is a stable plasma structure. The Trisops project achieved it one way. Paul has noted that ball lightning, which has been known for millennia, is a stable plasma structure. He has machine that produces ball lightning, and is measuring it. He gets no DOE funding of course.

  • by MustardMan ( 52102 ) on Monday July 16, 2001 @11:41AM (#81914)
    I work at princeton plasma physics laboratory in the computational plasma physics group. Politics have jack shit to do with why we don't have fusion working. The fact that plasmas are goddamned hard to model and understand and maintain stably ARE why we haven't gotten fusion energy yet. We get PILES of USDOE funding every year and pour it into more and more innovative research. No one is standing out picketing plasma research labs because anyone with a tenth of an IQ point knows that fusion is clean and safe, unlike fission. In summary: pull your foot out of your mouth and your head out of your ass, and talk about something you know.

  • Well, what you're implying here is that we have the ability to create a propulsion system where only a small fraction of the weight of the payload (most of it would be distributed to the power grid after it lands, presumably, only a small amount sending it back up again) would be fuel.

    If we had ANY way of producing energy densities like that in a useful fuel, don't you think we'd be using them to send craft up into space right now?

    Of course, I'm assuming that the mass of the payload would not change significantly in the loading/unloading process of the energy. That holds for almost anything I can think of.
  • A higher dependency on Solar Cells and heat-energy-converting/trapping devices could also help lower the amount of heat we have to deal with.

    (By "heat-energy-converting/trapping" devices I presume you mean solar water heaters and the like.)

    Solar is NOT a solution to "global warming". That's because solar panels capture nearly all the incoming radiant energy. Solar cells convert a few percent to electricity (that ends up as heat when it's used) and the rest to heat at the panel. Solar heaters just capture it and turn it into local heat.

    The problem is that they replace something that reflected a significant part of the incident light still as LIGHT - at frequencies that pass right back through the greenhouse gasses. Dropping the albedo at the surface means you've boosted the greenhouse effect BIG time, without even touching the gas concentration.

    Fortunately, global warming is NOT a big issue. As it stands it's you're talking raising the temperature a couple degrees a century. That's like moving your farm 50 miles south or a couple hundred feet down the hill. Big deal. TINY compared to the ongoing climatic cycle.

    But it's doubly not a problem because it's a RISE in temperature. It's TRIVIAL to drop the temperature by tens of degrees: Just inject a few tons of dust into the upper atmosphere - like volcanos do from timt to time. Inject as much dust as you need to get the cooling you want, and if you overdo it a little bit most of it will be down in a year or so - so just reduce the amount you're injecting until you get the temperature where you want it.

    Now if it were global COOLING we were worried about - like the return of the ice ages - that might be an actual problem. (But we could just burn a LOT of fossil fuel and hold it off another few centuries, until we can put some moon-sized mirrors at L4 or L5 and solar-cook the planet as much as necessary.)
  • It's only a research reactor. I imagine they collect the heat to prevent the reactor from getting too hot.

    If this were a production reactor, the question should be, is there a more efficient or cost effective method to get the power out than heat+water=turbine-power? I would guess the answer is not yet on the scale needed for a power plant.

  • It seems that the amount of energy spent in the magnetic containment fields is what is keeping fusion generators from reaching a breakeven point. Isn't it true that the superconductivity in high temperature superconductors can be maintained solely by the power needed to keep the conductors cold enough? Beyond that, it seems that the current in the coils can be as high as needed without further increases in power input. To reach breakeven one would theoretically only need to increase the plasma density. Is there something I don't know about plasma containment that continually depletes the magnetic fields?

    Is there a fusion expert out there who can shed some light into the energy requirements of plasma containment?
  • Actually no the containment is fairly energy cheap, the real problem is the startup energy versus the energy it creates.

    Thanks for the explanation.
  • by michael_cain ( 66650 ) on Monday July 16, 2001 @12:45PM (#81925) Journal

    At first I thought I might agree, but then I thought about what the reaction "products" were. IIRC, you get fast neutrons (high kinetic energy) and high-energy photons (gamma radiation). There is a kind of amusing simplicity in the strategy of letting these slam into some object, raising the average kinetic energy of the object's molecules (hence it's temperature), then extracting that energy from the other side. As others have pointed out, steam turbines are surprisingly efficient.

    Are there materials that could be used for the gamma-ray equivalent of a photocell?

    Given that neutrons have no electrical charge, is there any way to extract the kinetic energy other than smacking them into something?

    Does a significant amount of the reaction output show up as "fast" helium? Is that any easier to deal with than neutrons?

  • by medcalf ( 68293 ) on Monday July 16, 2001 @08:46AM (#81926) Homepage
    I assume that you mean the actual containing field, rather than the shaping fields discussed in the article. Presumably, the power would come from the reactor itself, so that if the magnetic fields collapsed, it would indicate that the reaction had ceased. That would not necessarily mean that there wouldn't be plasma leakage. Most likely, though, there would be redundant generated power for critical systems (as there is at nuclear plants). For example, several reactors in the same complex could each power the others. In other words, that particular problem shouldn't be too likely.

    If magnetic containment were to fail, you would have a very hot stream of plasma shooting in a straight line from the reactor. The pressure of the stream would drop so rapidly that there could not be a sustained reaction (i.e., no boom). The walls in the way of the stream would likely be melted. I'm not sure what they would do for secondary containment - most likely a shell similar to what is done with fission reactors, but using different design to account for the different hazards. You'd probably get a huge puddle of (non-radioactive) water to clean up, too.
  • This article just reminds me of the complete lack of direction the US has had for a long time in its energy policy. Bush has recognized this, but hasn't really proposed a solution.

    Why on earth isn't US Energy Policy pushing hard for the development of fusion based technology? Isn't it obvious this should be the centerpiece of our effort? Unlike fission, fusion is clean, safe, sustainable, and environmentally friendly. It's just hard technically.

    I believe the environmental movement has fallen into the trap of being against things, but not for anything. If you are worried about global warming, advocate fusion research.

    Similarly, dependence on foreign oil is a great security risk and results in mideast leaders being a little to big for their britches. Iran, Iraq, etc... The mideast is extremely volatile and if it wasn't for oil, the US wouldn't have to care.
  • I'll see you guys on CNN!
  • by smirkleton ( 69652 ) on Monday July 16, 2001 @10:31AM (#81930)
    I know it is theoretically the perfect power source, and that it shouldn't produce environmental problems like nuclear waste or dirty emission - but I also know as-sure-as-eggs-is-eggs that there is going to be a protest movement against it, regardless. Which leads me to my question...

    Are there any fusion protest groups yet? I'm always late to join protest movements so I get crappy seating at rallies and never get to talk to the news media about my important opinions on the subject.

    If you know of any, please post. If it helps, I am SINCERELY against the late 60's musical movement by the same name.

    (signed, someone who genuinely wants to make a difference, as long as others are watching...)
  • (Then our next problem will be heat pollution)

    Perhaps... Heat Pollution would become a problem, but hopefully that would be worse than greenhouse-effect causing gasses that we release by Fossile fuels, if such gasses do in fact cause global warming (of which I'm not fully convinced.)

    A higher dependency on Solar Cells and heat-energy-converting/trapping devices could also help lower the amount of heat we have to deal with.

    And of course Trees help quite a bit, too. If would could just stop cutting them down.

    "Everything you know is wrong. (And stupid.)"
  • by wass ( 72082 ) on Monday July 16, 2001 @09:25AM (#81934)
    greenhouse-effect causing gasses that we release by Fossile fuels, if such gasses do in fact cause global warming (of which I'm not fully convinced.)

    Well, here's a little calculation that might help convince you about the greenhouse effect. I'm too lazy to look up the numbers and everything right now, but if you look in any basic astronomy book and this calculation should be there.

    Take the luminosity of the sun and using the cross-sectional area of Earth and knowing Earth's distance from the sun, and accounting for it rotating for a more-even heat distribution, you can find the average solar power striking Earth.

    Now assuming the Earth is in thermal equilibrium with it's surroundings, it will thermally radiate at this same power rate. Assuming Earth is a simple blackbody, what is the temperature that it radiates at? In other words, what is the temperature of the surface of Earth, as determined by the power of the sun and the distance from that sun?

    The answer comes out to roughly (it's either a few degrees above or below this value) 0 degrees celcius. That is, around the freezing point of water. Granted some parts of Earth are frozen, but most parts are able to easily maintain liquid water, often at substantially higher temperatures than 0-degrees C. What accounts for Earth to be this warm? It's the greenhouse effect!

    Most scientists will readily argue that the greenhouse effect is real, and in fact necessary, for life on the planet. So I hope that answers your question about the effects of greenhouse gases and global warming.

    The real question, though, comes about when we consider how would the surface temperature change as we adjust the CO2 levels from what they were a hundred years ago. That's the harder question to answer.

    I do believe that as a species, through engine emissions and other means, we are starting to significantly alter the planet's ecosystem. Probably through increased population alone will the effects start to manifest themselves.
    __ __ ____ _ ______
    \ V .V / _` (_-&#60_-&#60
    .\_/\_/\__,_/__/__/

  • Hmmmm ... the description sounds all wrong.

    I wonder about the scientific literacy around here when this comment is at a +5.

    Most notably, particles don't helix around electric field lines. Particles helix around magnetic fields. This is high school physics people!

    Now if I substitute electric for magnetic, the description makes a bit more sense. With this substitution, it sounds like the poster is describing a variant of a magnetic mirror machine.

    This is so old it seems new.

    (However, the variation might be original ... but the description is too vague to tell.)

    At Livermore in the 1960s, a giant mirror machine was built and mothballed on the opening day (funding had dried up when the fusion community began its quest for mythical Tokamak fusion reactor). When I last saw the mirror building (three years ago or so), the equipment had been thoroughly picked over by experimenters.

    Simple magnetic mirrors always had problems with the mirror loss-cone. Magnetic mirrors work really well except for particles travelling near normal to the current rings (the loss-cone).

    Given that particles have to collide for fusion to occur, some collisions end up scattering particles into the loss-cone and thus, plasma confinement is not that great.

    Also, the velocity space distribution functions resulting from a loss cone leads to a whole class of plasma instabilities (surprisingly known as "loss-cone instabilities").

    More complicated mirror devices have been designed which allieviate some of these problems but they have not received much attention from funding organizations.

    Please don't waste other people's time talking authoritatively ("Classical EM shows ...") if you don't in fact know what you are talking about.

    Kevin
  • by Doctor K ( 79640 ) on Monday July 16, 2001 @10:22AM (#81937) Homepage
    IANAP, so I am talking out my ass here, but it seems to me that the interior surface of the container of a reaction might just somehow be able to more directly collect energy, similar to the way solar-panels collect light. Of course, I have no idea what kind material might be used to accomplish this. How do solar-panels work? Silicon? Is it just dumb luck that the elements of a solar panel happen to convert light to energy, or is it a man-made composite, built specifically for that purpose?

    Yes, you are talking out of your ass.

    Note: I did my Ph.D work in plasma physics but now I work in quantum and optical electronics. I am probably one of the better qualified people here to answer your question.

    Conventional fusion reactors fuse deuterium and tritium. Or, if you breed tritium from a lithium blanket surrounding the reaction, you can do fusion using deutrium-deutrium full burn (this is tougher to do than D-T reactions).

    However, the by-products of D-T and D-D fusion are mostly high energy neutrons (and some gamma rays and neutrinos and alpha particles...). High energy neutrons are not easy to convert into electricity because neutrons are not charged. In fact, the neutron flux of a large fusion reactor would be deadly and thus a fusion reactor needs to be heavily shielded while operating. (Watch "Chain Reaction" and laugh as Keanu and his advisor walk around the operating reactor after it stabilizes.)

    A typical approach for the conversion consists of letting your neutron flux heat a block of lead (or other material) and then running a standard steam cycle.

    This sucks on many levels.

    First, you end up throwing away much of your power from the inefficiency of the steam cycle. That is the theoretical thermodynamic efficiency of a fusion reactor which can somehow do direct conversion is effectively 100% (hot reservior at millions of degrees, cold reservior at room temp) while a steam cycle is limited by how hot you can heat your materials (hot reservior at thousands of degrees, cold reservior at room temp).

    Second, the neutron flux will activate (i.e. make weakly radioactive) the walls of your reactor and steadily degrade the structural integrity of your vessel. As a result, current estimates are that the core of a fusion power plant will need to be replaced every couple of years (which makes energy providers frown ... fusion reactor vessels will likely not be cheap).

    Other approaches are to use fusion reactors as breaders for fission plants (i.e. use fusion neutrons to enrich fission reactor fuel). Many estimates already put current reactor technology beyond breakeven for this type of design. However:

    - Design is not politically feasible (some alternative fission fuel cycles might be possible). Fission suffers from NIMBY and fusion-fission breeders have a massive proliferation risk.

    - Fuel for fission reactors is not particularly rare and running a fusion plant will likely not be cheap. Thus, economically, currently there is no compelling reason.

    Solar cells on the other hand rely on photons exciting electron-hole pairs in a semiconductor. The light from the sun partially consists of photons in the visible and near infrared range which are suitable for conversion by a solar cell.

    You might be wondering why fusion reactions produce high energy neutrons and gamma rays and other generally nasty things while our sun shines a whole lot of light. You should remember that the sun is big and the products of a fusion in the sun take hundreds of thousands of years to reach the surface (random walk ... collisions ...). By that time, all that the sun radiates is a near perfect blackbody radiation spectrum.
  • by anacron ( 85469 ) on Monday July 16, 2001 @08:29AM (#81943)
    Because it's not yet possible I wonder if anyone has thought about this before -- would it be less expensive to "cluster" smaller fusion reactors together to achieve energy output, or is building one large reactor the "best" way? I just look at the progression of things: Room-sized computers->high-end workstations->desktops->distributed computing ... maybe power generation can follow a similar model? We've already scaled up -- moved from small output steam generators.. is it time to start scaling down again?
  • by Greyfox ( 87712 )
    Steam is so primative. You'd think with a technical innovation as amazing as fusion, you should be able to find a way of stripping the electrons right off the atoms. Using steam is barely better than Og the caveman beating two rocks together to get fire.
  • Nuh uh to you, too. The system, in this case, is the Earth itself. Once the energy is here, all conversions just move the heat energy around different parts of the "system". And each conversion produces waste heat that gets leaked out into the system at large rather than going to where you want it to go. It doesn't go away until it is radiated out into space. That's just basic thermodynamics.

    Also, if heat were "quite willing to radiate off the planet with minimal fuss", then we would have no "solar greenhouse" at all, much less any problems with it. The only difference between greenhouse heat from the Sun and energy sources on the Earth is just the source. Once you have heat, you have to get rid of it (at the right rate), whether it came from the Sun or not. :-)

    Now, a more appropriate question is whether we could approach the scale of Earth-impacting solar energy with our own heat producing energy sources like fusion, fission and fossil fuels. I admit I have no idea of their relative magnitude.

  • Pretty interesting idea. But that patch of empty sky is actually full of a lot of air. The heat has to pass through a lot of air before it gets free in space. Since conduction and convection are much more effective than radiation at transmitting heat, wouldn't you just end up making your local chunk of the atmosphere very warm? Would more of the heat radiate out into space, or would it just circulate around the atmosphere by convection? Also, with enough heat to actually make a difference on a global scale, I would imagine that there would be significant local weather phenomena created from temperature differentials around the giant toaster oven. :-)

  • by 4of12 ( 97621 ) on Monday July 16, 2001 @11:01AM (#81951) Homepage Journal

    Now, a more appropriate question is whether we could approach the scale of Earth-impacting solar energy with our own heat producing energy sources like fusion, fission and fossil fuels. I admit I have no idea of their relative magnitude.

    I would have had no idea of their relative magnitude, either, except that I'm a Slashdot Reader.

    The recent solar car race article included references that suggests solar energy flux is of the order of 1 kW/m2. With a radius around 6.3e6 meters, the cross sectional capture is around 1.2e14 m2, suggesting the solar input radiation is around 1.2e17 Watts. (Which also could suggest why CO2 emissions that affect solar gains and losses don't have to do much to cause an observable effect on the planet's temperature. But I digress.)

    All the recent hubbub surrounding the California electrical generation capacity crunch has bandied about figures for big power plants that generate, oh, like 5 GigaWatts. Looks like there's a factor of about 1e8 before terrestrial generation gets anywhere close to Sol's warmth.

    Given those magnitudes, I doubt man-made heat generation would be a problem. It is much more likely the problem would turn out to be some much more prosaic, like worrying about liquid Lithium being in short supply, or finding a way to deal with the irradiated equipment and byproducts of fusion reaction.

  • You're just thinking about certain fusion processes. D-3He (deuterium/helium-3) is nearly aneutronic.

    Also, power can be extracated from a hot plasma in several ways, not _just_ through the radiation flux. (eg, MHD.)
  • Actually, the main reason why space funding, although not necisarily general science funding has decreased was the outer space treaty of 1967(8?) This treaty had the seemingly innocuous goal of preventing nations from claiming celestial bodies. That way the russians couldnt claim the moon, of course, then neither could the US. Withouth the threat of a "red" moon, space funding dropped off dramatically. If you look at historical budget records, space funding began decreasing immediately after the treaty was signed. Think of it this way, if nations could claim celestial bodies, there woudl be a strong incentive to go there and claim as much land as possible before your enemies did. There is then further incentive to hold onto this land once it has been grabbed, which means armies, space navies, and most of all, bases. All of those things cost lots of money though, and once you start claiming territory, you essentially have to go through it, its an arms race on a grand scale. You could see it starting with apollo and then it all of a suddent died off completely. For several years between 1972 and 1981, the US for all intents and purposes ceased to have a manned spaceflight capability. If the US had claimed territory on the moon, or worse, if the russians had, this woudl have been an unthinkable scenario.
  • Just a wild theory here...

    If beaming the power runs into so many risks, then why not design the satellites to accept batteries or other power storage modules (like flywheels)? These could be manufactured on the moon, launched from there to the satellites, then ejected and sent down to Earth (preferably in some unpopulated zone) when full. Their energy would then be released into the power grid. Alternately, most of their energy could be used to launch themselves from Earth up to the satellites (say, on some high-G railgun; you'd need to make the launch/dock/charge/undock/land sequence fully robotic since the launch alone would kill any attendant human technician), with the rest released into the grid, so that we wouldn't need a constant stream of battery manufacturing; it'd be inefficient, but clean.
  • I was thinking some high-G railgun - useless except for cargo-only, and best if fixed to a single orbit. General purpose launchers, this would not replace, but this specific application might be useful...
  • Do you really think that the US energy policy in the next four years is going to include ANY money for research in this area?

    This technology would threaten the economic well-being of GW's oil buddies (i.e. campaign contributors)....you can expect NO funding for fusion research until at least January of 2005.


    "I have as much authority as the pope.
    I just don't have as many people who believe it."

  • So you're using centrifugal force to create a potential well to hold the particles in. Two questions:

    (1) The particles are very hot indeed. Their mass is low. The centrifugal potential well has to be very deep indeed to keep them from escaping. How well does this work? How hard is it to spin them fast enough? The electrons will escape the well more easily than protons/nucleii. How quickly will the plasma become positively charged? (Depends on the ratio of temperature to well depth.) What effect will it have on the operation of the machine that you have a huge current due to the very quickly spinning positively charged plasma?

    (2) The particles are whizzing around, and are 'attached' to the magnetic field lines. This suggests that the magnetic field lines will get twisted very quickly, bringing the spin to a halt. This was my first thought, but if you make the field lines into loops (coathanger shapes) then you can whizz your coathangers around without twisting things up. Two problems with this: To make a magnetic field loop, you need a current. To make a very powerful one, you need a very large current. How is this done? Secondly, any 'stray' field lines that don't fully loop will get spun up very quickly, so even a very small non-looped field will magnify by being spun up until it causes you problems. (IIRC, galactic magnetic fields are thought to have been formed from very weak projenitors by this process.)

  • Agreed. Does someone have a better cite?

    Fusion researches speak of "theoretical breakeven", where the fusion reaction produces more energy than is being put in, and "power breakeven", where you actually get out more useful energy than you put in. This is talking about theoretical breakeven; they're not actually generating power.

    Can they run the current thing for long periods, or is this something that runs for a second or two?

  • ... in Canada:

    http://www.iter.org [iter.org]

    It's a massive international effort to produce a proof of concept, apparently the power output is going to be on the scale of a conventional power plant. They are expecting it to be finished in about 10 years (IIRC)

  • by DNAGuy ( 131264 ) <brent.brentrockwood@org> on Monday July 16, 2001 @10:16AM (#81976) Homepage
    "make their scale-model fusion generator produce energy significantly in excess of what they're putting in." -- Timothy

    "In this house we OBEY THE LAWS OF THERMODYNAMICS!" -- Homer Simpson

    --- Brent Rockwood, Development Lead

  • The ITER project is very old....The version they are planning to build in Canada is a stripped down version of the original project. The US pulled out of the original ITER project partly becuase the US scientific community is divided on whether money spent on a reactor sized tokamak is a good idea or not. We've learned alot about the limitations of a tokamak design in the last 20 years or so. There is now strong interest in the US to look at other designs other than the standard tokamak doughnut. Low aspect ratio devices(think an apple shape rather than a doughnut) which solves some stability problems that plague tokamak operation. There is also alot of interest in bringing back the stellarator..which is a fully 3-D device (think doughnut, but a french crueller)..now that we have to computing power to start thinking about doing fully 3-D plasma physics. Numerical simulation of fusion temp plasma physics is...HARD....and we are just getting to the point of having enough affordable computers (beowolf) to start doing 3-d modelling of plasma systems.
  • I'm not denying that the tokamak effort is more mature than other designs....but i take issue with the idea that the general fusion community believe the solutions to the tokamak problems are well understood...scale well...and scale economically.

    When was the last tokamak in the US built?

    And yes alternative devices...aren't well developed...this is research afterall. They won't be well developed unless we invest some time and money to look at them. If you take a look at the money needed to realize one full-scale tokamak reactor experiment and weight that against the money needed to perform a larger number of smaller devices aimed at looking at new innovative physics concepts...you have to ask yourself...is it worth putting all of our resources into one large reactor experiment...and experiment so large and scrutinized that real innovative, risky research would be difficult to perform becuase of the political pressure to keep the reseach simple and predictable to gain a PR success.

    IF we threw enough money at a fusion reactor design we can get decent power out...but the cost to build and run an advanced tokamak reactor would make the power produced orders of magnitude more expensive than current power sources. That doesn't make a tokamak a very attractive design. -jef

  • by jspaleta ( 136955 ) on Monday July 16, 2001 @08:57AM (#81984) Homepage
    My understand of reactor design...is that bigger is better for tokamak designs for energy density reasons. It costs a lot to produce the magnetic fields, and it only cost marginally more to produce a slightly bigger magnetic container....where as the bigger the device the more fusionable material you have to play with. So if you want a reactor that actually produced more power than it takes to ignite it..you need to scale up.

    I think that even applies to low aspect ratio designs. I work on a small low aspect ratio plasma device CDX-U at PPPL. It's not a fusion device...since the temp isnt really hot enough for fusion...

  • by pclminion ( 145572 ) on Monday July 16, 2001 @09:21AM (#81989)
    Don't get too worked up about this. As soon as someone, somewhere, manages to get positive power output from a fusion reactor, they will die in a "mysterious accident." Their notes will be burned in a "inexplicable fire." The buildings housing computers containing pertinent information will be involved in "an unfortunate, unexplained explosion." The petroleum companies have too much invested in world pollution to just sit around and let this happen.

    The best way to prevent this from happening is complete disclosure of all knowledge pertaining to fusion, and large-scale mirroring of that information all over the world.

  • Even if we were to increase our energy prodution by factors of 100 million so as to compete with the sun, we would still have tricks available to us to dissipate the excess heat.

    Increasing the earths albedo and reducing its greenhouse effect help to a point. In fact the increasing occurance of cloud cover might begin to block out the sun completly, but that would be an extreme case.

    Thermoeletric generators that absorb energy from temperature differentials then beams them into space as microwaves could be possible, or we could simply transmit generated energy into space for consumption off-planet.

  • by Srin Tuar ( 147269 ) <zeroday26@yahoo.com> on Monday July 16, 2001 @08:58AM (#81991)

    A higher dependency on Solar Cells and heat-energy-converting/trapping devices could also help lower the amount of heat we have to deal with.

    umm, these devices, which allow you to store heat energy only take heat out of the system until you actually use them, at which point they return all the heat they took originally.

    Sure fusion may allow us to have access to alot more heat, but the stuff is quite willing to radiate off the planet with minimal fuss (Given proper atomospheric conditions).

    Now turning our planet into a solar greenhouse or toxic waste dump- those are potential problems. "Heat Pollution" is a non-issue.

  • IRC Helium-3 isn't very common. Where you gonna get it from?

    Secondly, how easily does D-3He fuse? It takes a MUCH higher temperature and pressure doesn't it? That takes energy, and energy you need to get back in order to break even (energy) or break even (money).
  • Right now, there are some severe issues with getting it to work at all.

    But, let's assume that tomorrow there is a breakthrough and it all magically works perfectly.

    The problem is that most of the energy of the fusion reaction comes out in the form of neutrinos, which you can't practically stop, some heat, but mostly fast neutrons.

    The fast neutrons don't dump their energy into heat energy very easily at all. The best scheme I heard for doing that was lining the inside of the fusion reactor with lithium, transmute that for a bit and then stuff the lithium into a conventional fission reaction and use THAT to make steam.

    And that's the most realistic scheme I am aware of. The fission reactors, and the disposal issues of all the elements that are getting irradiated make this very far from being a clean process. Fusion power is never going to be clean.
  • by skwang ( 174902 ) on Monday July 16, 2001 @11:39AM (#81999)

    (Slaps Forehead)

    Your absolutely right. My bad.

    In this setup plasma particles align themselves with the MAGNETIC field, which is threated through the magnetic rings (duh). The Electric field is generated in the center and radiated outward toward the edge of the bottle.

    For more information on this containment theory please visit my professor's web page at: Centrifugally Confined Plasmas [umd.edu]

    You can also get a good scematic of the design at: This link [umd.edu]

    I apologize for the confusion.

  • by skwang ( 174902 ) on Monday July 16, 2001 @08:50AM (#82000)

    The tokamak reactor design uses a torus (donut) shaped ring to confine the plasma. Another design is one my (former) physics professor and the group he is in are currently working on. Basicaly the design consists of two magnetic rings, one above one another. The electric field is threaded through the bottom one and through the top one. The electric field bulges out between the two rings making a sort of "coat hanger" cross section between the rings. This forms the shape of the magnetic bottle.

    Classical EM shows that the plasma particles will be confined to the electric field lines and helix around them. If there were no magnetic fields the particles would "escape" this system through the top and bottom of the E-fields.

    The neat part is that when the magnetic fields change, the system imparts an angular momentum onto the plasma particles. The result is that the plasma spins (in the same plane as the magetic rings). Since the electric fields are in a bent, the centripetal force will push the plasma into the middle of the "bottle" and away from the top and bottom. The anaolgy he gave was take a bead and put it on the bent wire of a coat hanger. Now spin the hanger around its long axis. The centripetal force will push the bead to the "bulge" of the hanger. Similarly, the plasma should be pushed to the "bulge" of the magnetic bottle. Hopefully when enough energy is added to the system the plasma will fuse.

    Last I heard the group this professor works in was trying to get funding to program a model of the reactor, so no working model is on the way soon. He claims that thoeretically this setup should be able to cross the energy in-energy out threashhold. Of course only time (and money) will tell.

  • Yeah, but photovoltaic efficencies are about 10-15% if I recall. Steam turbines are much more efficient, around 60-80% if I recall correctly through half a decade to my power systems class. But it would be cool if they could capture the energy without the big iron that steam trubines require.

    Water (steam) has ideal properties for use in energy transfer systems. It is plentiful, non-toxic, and has a very high specific temperature (absorbs/releases a lot of energy per volume). These features make it reliable, clean, and easy to work around. All we need is to make a clean source of heat...oh wait, that is what the article is about.


  • All the recent hubbub surrounding the California electrical generation capacity crunch has bandied about figures for big power plants that generate, oh, like 5 GigaWatts. Looks like there's a factor of about 1e8 before terrestrial generation gets anywhere close to Sol's warmth.

    Given those magnitudes, I doubt man-made heat generation would be a problem.

    Unfortunately you can't just look at total inputs and outputs to draw your conclusion. You need to look at the effects of localized heat generation, particularly on weather. You'd probably see effects similar to the effects large cities have (see this article [usatoday.com], for example).
  • You really shouldn't be posting good stuff like that at AC :) One question, how hard is it to separate out the different types of hydrogen? Eventually that should be considered when discussing the break even point.
  • Well, solar cells work a bit differently, though I forget the specifics right now. Something about the light bumping electrons off of metal alloys (I could be getting mixed up with chlorophyl). Either way, if a material could be created that could convert heat directly into electricity (like a solar cell does with light) then the efficiency of any reactor would go up. Note that I am not saying that the heat -> electricity conversion would have to be 100% efficient so it shouldn't violate the laws of thermodynamics.
  • The politics of fusion are much more difficult than actually achieving fusion.

    Controlled thermonuclear fusion with a continuos isotropic neutron output was achieved by Philo Farnsworth in the ITT labs in 1967.

    Currently Chrysler is selling a neutron source based on a simplistic recreation of one of Farnsworth's earlier tube designs. The device is advertised as creating neutrons by controlled thermonuclear fusion - which it does.

    There are several amateurs who have duplicated Farnsworth's work and have achieved fusion in their basements.

    These facts are a massive embarrassment to the people at the top of the magnetic fusion community - and as a result there is zero funding available for people using the electric field - inertial confinement principles outlined in the Farnsworth patents.

    Most people in the fusion field have never even heard of Farnsworth.

    Farnsworth is best known as the person who created the entire system of television in 1927. Farnsworth is enshrined in the Inventors hall of Fame at the patent office in Washington DC. Sadly Dr. Farnsworth suffered a series of strokes shortly after his fusion work and died in 1971. His work has languished in obscurity ever since.

  • From what I recall from my Physics days... you need high temperatures (1 million degrees) and high densities to get Fusion to happen. That's why you need magnetic "bottles". Nothing else can hold these high temperature plasmas.
  • that the only way we have invented to caputre the energy of a nuclear reaction was by superheating water and using steam pressure to turn turbines. That always seemed like a hack way to collect the energy. Anyone know if the energy collected from this thing is more direct than heat+water=turbine-power?

    Well, your fingers weave quick minarets; Speak in secret alphabets;
  • by tenzig_112 ( 213387 ) on Monday July 16, 2001 @09:00AM (#82042) Homepage
    It could be decades before the efficiency and safety of such a means of power generation become practical.

    In the meantime, why are we wasting time drilling for oil and chasing cold fusion pipe dreams when we should be pushing forward in the direction of the infinite improbability drive.

    Paladium fuel is incredibly expensive and rare. But all you need for the IID is a bit of fairie cake and a cup of tea.

    Wait- you're turning into a pengin. Stop it. [ridiculopathy.com]

  • by American AC in Paris ( 230456 ) on Monday July 16, 2001 @08:50AM (#82054) Homepage
    With a fusion reactor, what would happen if you completely lost power to the magnetic fields? Would it blow up like a H-bomb or at least level the building? People aren't going to allow these kinds of plants to be built unless they are as safe or safer than fission plants.

    From itercanada.com [itercanada.com]:

    What about the risk of an explosion or meltdown? Is this possible with Iter?

    No, the fusion process in Iter can only be achieved under precise, controlled operating conditions. If conditions in the Iter machine are not ideal, the process just stops - it cannot escalate out of control. Therefore, there is no possibility of a massive energy release-or a "core melt" accident-from the Iter Tokamak.

    Basically, in order to keep the plasma going, it needs to be constantly controlled by the magnetic containment field. If this field fails, there's no explosion; the plasma effectively loses state, and the whole reactor shuts down of it's own accord.

    In a nutshell, fusion energy is safer than breathing.

  • by markmoss ( 301064 ) on Monday July 16, 2001 @09:45AM (#82077)
    A fusion reactor would contain just a few ounces of plasma. A magnetic field cannot drop instantly, instead it would gradually taper off. As the containment eases up, the plasma starts spreading out, fusion stops, and the plasma radiates away most of the heat before it's expanded out to the chamber walls. (And the chamber walls have to handle LOTS of radiated heat in operation.) Finally, even if somehow containment was lost instantly, the quantity of plasma is so small that the heat and energy content is easily manageable.

    A fission reactor is much more dangerous because all the control rods stop (if they work) is the chain reaction. The chain reaction basically splits U235 nuclei up into random sized pieces, mostly highly radioactive, and most of the heat comes from the decay of those fragments. So when they drop the control rods, the fission tank continues to heat up for several hours. To prevent a melt-down, you have to keep the cooling water circulating. Of course this can be powered by the heat you are removing, but if the problem is a blockage in the cooling system... E.g., at THree Mile Island they had a cooling valve closed and didn't realize that for several hours. Secondary cooling kept the reactor well below melt-down, but it did get hot enough that pressure had to be let out, allowing a negligible amount of radiative gas to escape. Note that this was the "worst" accident in commercially-operated nuclear power anywhere in the world (Chernobyl wasn't commercially operated), and fusion would be safer.

    There are two dangers in a fusion reactor. One is that one of the fuels might be tritium, a radioactive form of hydrogen, which is remarkably good at finding leaks. Due to the smaller fuel quantities required there is less overall danger of radioactive leakage than fission. It just requires good managment... The other is that fusion reactions release neutrons, which tend to turn other materials radioactive. In other words, unless you very carefully select materials not subject to this effect, and make them extremely pure, after 30 years or so the plant structure itself will be radioactive. Fission also releases neutrons...

  • by markmoss ( 301064 ) on Monday July 16, 2001 @10:25AM (#82078)
    there a more efficient or cost effective method to get the power out than heat+water=turbine-power?

    At first glance, it looks like there sure ought to be. Tne conversion of heat to power necessarily allows some heat to just flow from the hot end to the cold end. The maximum possible efficiency is the hot temperature (in degrees Kelvin, that is referenced to absolute zero) divided by the cold temperature. In a steam plant the hot temperature is limited by how hot the pipes can get and still hold pressure, and the cold temperature is limited by wherever you are dumping it. So the theoretical best thermal efficiency is around 40%, and given the various losses which are unavoidable if you want the plant to run at a reasonable speed, overall efficiency isn't much better than 33%. That is, 1/3 of the heat is used, 2/3 is dumped.

    So one theoretical way to increase efficiency is to somehow build the hot end without any solid materials to melt. I have seen theoretical designs of a magneto-hydrodynamic generator that would use the plasma itself as the working fluid (instead of steam) and magnetic fields instead of pipes and turbines. So your theoretical maximum efficiency could be extremely high (99.9...) but by the time you make it actually work you could be wasting more than a steam engine does. And, as far as I know, no one has really worked on this.

    Also, you might not retain enough heat in the plasma to feed a MHD in the first place. The proposed fusion reactions I have seen tend to emit most of the energy as gamma rays and fast neutrons, and of course hot plasma is going to continually radiate it's heat away. So far the only way to collect the energy in that radiation is to absorb it in thick shielding, then you circulate water through the shielding, generate steam, etc., and probably wind up with ess than 30% efficiency like a fission plant. If you could directly capture the energy from that radiation, like by having the gamma rays knock electrons "uphill" against a strong electric field, then you could have much better efficiency. But that's even harder to make work than MHD.

    These ideas are more than thirty years old, but as far as I know, no one has ever received a sufficient budget to really work on them. Someone asked if our government was really taking energy seriously. If we were really serious, we would be treating fusion power like the Manhattan Project in WWII -- trying everything that could work at the same time -- with one difference, we could make all the data public so anyone could make a contribution, rather than treating it all as deep secrets just in case there is some practical relationship between making 1/10 of an ounce of fuel fuse in a reactor and making hundreds of pounds fuse in a bomb. Having presidents beholden to the oil business sure doesn't help, but even Carter talked about fusion power but didn't really do anything. For instance, during his administration a Russian scientist came to this country to give a lecture on their fusion power work. The FBI came in and covered up his blackboard. (Whose secrets were they protecting from whom?) Quite

  • by markmoss ( 301064 ) on Tuesday July 17, 2001 @04:29AM (#82079)
    Given that neutrons have no electrical charge, is there any way to extract the kinetic energy other than smacking them into something?

    You use a small black hole (grin) to create a gravity field so strong that the neutrons orbit it until they decay into protons and electrons, with a half-life of 12 seconds. Then a magnetic field separates the protons and electrons, you collect them on electrodes, and you just have to convert a small current at millions of volts DC to something you can feed into the power grid.

    In short, with foreseeable technology the answer is no. Neutrons are affected only by gravity and the "strong" and "weak" nuclear forces. We don't even have a theory for effective gravity control. The nuclear forces are extremely short range (like the diameter of nuclei), so even if we could influence them, we couldn't capture neutrons any more efficiently than we already do with shielding. (Actually shielding uses the nuclear forces: use enough of it and there is no way through without hitting a nucleus.)

    In the easiest reaction to start up, D+T = He-4 + n, Most of the energy goes with the neutron and gamma rays, but the helium nucleus does recoil when the neutron is fired off. This heats the plasma somewhat; _if_ this heating exceeds the heat loss by radiation, you could expand the expended plasma through a magnetic field to separate electrons from nuclei and collect some electricity directly. But the bulk of the energy would still feed a steam cycle.

    A gamma-ray "photocell" would have to work at millions of volts to be at all efficient, so it isn't going to happen in solid-state. I could conceive of a vacuum tube where the gamma rays knock electrons loose and toward a -1,000,000V cathode, but I can't see how to get a significant percentage of the gamma rays to hit the electron in just the right place... One other possibility might be to use materials that "scintillate" (emit light) when hit by gamma rays, and capture that light in photocells. But photocells are generally less than 25% efficient, and I doubt you'd get 10% efficiency overall. If you could run the scintillator and photocells at boiler temperatures, then the energy missed by those could make steam to drive a turbine, etc., so maybe you'd increase the overall efficiency from 30% to 40% -- but I think the scintillators are some sort of plastic and photocells need to stay cool to work well.

    The best bet, aside from sucking it up and using the steam cycle, is an alternative fuel mix that outputs much of the energy as fast charged particles. Someone suggested D + He-3 = He-4 + p. (D = Deuterium, H-2. He = Helium. p = proton.) The proton might come flying out pretty fast (with He-4 recoiling at the same momentum but 1/4 the kinetic energy, same as with a neutron). An electron would be left behind somewhere in the plasma cloud. So you could use magnetic separation to collect the protons, or to turn plasma heated by the protons into electricity. I don't know what the yields would be (either how much of the D would react this way instead of other ways, or what percentage of the energy goes into kinetic energy of the proton and HE-4 versus gammay rays). But all energy that evades magnetic separation will still be heat for the steam boiler, so it would improve efficiency if it works at all.

  • by MarkusQ ( 450076 ) on Monday July 16, 2001 @10:04AM (#82116) Journal
    IANAPBIPOIS (I am not a physicist, but I played one in school):

    Actually, if you are quite close to the reactor when it fails, you are in some serious trouble. The plasma inside the Torus is at a very high temperature (I thought it approached Solar temps, but cannot confirm this). If it spills all over you, you are dead. I assume any commercial reactor would be contained in some way to prevent accidents of this sort.

    You are right about the temperature, but containment is exactly the wrong solution. What you want is something that breaks away (in a controlled direction, say "up" would be nice). Remember that the quickest way to cool something really hot is to let it expand. (The second quickest way is of course to get venture capital.)

    This applies to pretty much any concentration of free energy. You can burn gun powder safely in a small metal dish, but the same quantity in a small metal pipe makes a rocket or a bomb (or both) depending on how the ends are capped. With the plasma from a just-failed fussion reactor you're looking at something on the order of a lightning bolt. Set free, you have a big flash, a loud bang!, and a lot of people saying "What the fuck was that!?!?!"

    Try to contain it, and you have a much louder boom, and a somewhat reduced number of people crying "Oh, the humanity!"

    -- MarkusQ

  • by greesil ( 452709 ) on Monday July 16, 2001 @11:54AM (#82119)
    radioactive waste is not a problem if your are fusing helium-3 and deuterium.

    It is a problem with deuterium-detuerium reactions, though, but no worries, there are oceans of helium-3 in Jupiter... we just gotta extract it.

    Also, fusion will be MUCH cheaper than gasoline. Consider the fact that the fuel supply for fossil fuels is limited, wheras deuterium is found EVERYWHERE. We have oceans of it here... It is a very good long term solution for any technological civilization, just in terms of fuel supply. Burning old dinosaur bones will only last so long.

"I am, therefore I am." -- Akira

Working...