Alternatives to Ansys Icepak

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

Orbital Stack, an AI and CFD web-based program, provides earlier qualitative guidance. It compares a wide range of land-use options and shapes, and highlights any red flags. It allows for climate-conscious, high performance developments that are not possible with traditional studies. Orbital Stack was developed by world-renowned experts in microclimate engineering and wind. It is a game-changer in the architecture and building design industry, providing our clients direct access for wind comfort and safety analysis as well as thermal comfort and shadowing analysis and cladding pressure simulations. This allows architects to quickly understand the climate effects of their proposed building designs and make better decisions, resulting in more resilient and high-performing projects.

GASP is a versatile flow solver that handles both structured and unstructured multi-block configurations, effectively addressing the Reynolds Averaged Navier-Stokes (RANS) equations along with the heat conduction equations pertinent to solid structures. It utilizes a hierarchical-tree architecture for its organization, enabling seamless pre- and post-processing within a single interface. Capable of solving both steady and unsteady three-dimensional RANS equations and their various subsets, it employs a multi-block grid topology that accommodates unstructured meshes composed of tetrahedra, hexahedra, prisms, and pyramids. Additionally, it integrates with a portable extensible toolkit designed for scientific computation, which enhances its versatility. The system achieves improved computational efficiency by uncoupling turbulence and chemistry processes. GASP is compatible with a wide array of parallel computing systems, including clusters, and ensures that the integrated domain decomposition remains user-friendly and transparent. Its robust design makes it suitable for a wide range of fluid dynamics applications.

Utilizing the Ansys Electronics solution suite significantly reduces testing expenses, guarantees adherence to regulations, enhances product reliability, and substantially shortens development timelines. This approach enables you to create advanced and superior products that stand out in the market. By harnessing Ansys' simulation capabilities, you can address the most vital elements of your designs effectively. Our solutions empower you to tackle critical issues in product design through comprehensive simulation. Whether you're involved in antenna, RF, microwave, PCB, package, IC design, or even electromechanical devices, we offer industry-leading simulators that serve as the gold standard. These tools assist you in overcoming various challenges related to electromagnetic forces, temperature variations, signal integrity, power integrity, parasitic effects, cabling, and vibrations in your designs. Furthermore, we enhance this process with thorough product simulation, which facilitates achieving first-pass success in designing complex systems such as airplanes, automobiles, smartphones, laptops, wireless chargers, and more. By integrating our solutions, you position yourself to excel in innovation and engineering excellence.

OpenFOAM is a free and open-source computational fluid dynamics (CFD) software that has been developed by OpenCFD Ltd since its inception in 2004. It boasts a vast user community spanning various engineering and scientific fields, including users from both industry and academia. The software offers a comprehensive suite of features capable of addressing a wide array of challenges, such as intricate fluid dynamics involving chemical reactions, turbulence, heat transfer, as well as applications in acoustics, solid mechanics, and electromagnetics. To ensure continuous improvement, OpenFOAM is released biannually, incorporating enhancements funded by users and contributions from the wider community. The software undergoes thorough testing conducted by ESI-OpenCFD's application specialists, development collaborators, and select customers, all supported by ESI's global network and commitment to quality. The assurance of quality is maintained through a stringent testing regime, which entails hundreds of daily unit tests, a moderate set of tests carried out weekly, and an extensive industry-focused test suite. This meticulous approach ensures that OpenFOAM remains reliable and effective for its diverse user base. Moreover, the collaborative nature of its development fosters a vibrant community that continually drives innovation within the software.

Autodesk CFD is a sophisticated software for computational fluid dynamics that allows engineers and analysts to forecast the behavior of liquids and gases with high accuracy. This tool significantly reduces the reliance on physical prototypes while enhancing understanding of fluid flow performance in various designs. It equips engineers with an extensive suite of robust tools aimed at optimizing system designs, managing thermal issues particularly in electronics cooling, and integrating Building Information Modeling (BIM) to improve occupant comfort in HVAC systems within Architecture, Engineering, and Construction (AEC) and Mechanical, Electrical, and Plumbing (MEP) sectors. Furthermore, the Application Programming Interface (API) and scripting capabilities enhance Autodesk CFD's functionalities, enabling customization and automation of routine tasks through the Decision Center. Additionally, the Decision Center streamlines the process of comparing system designs, thereby accelerating decision-making in design processes. This comprehensive approach not only improves efficiency but also empowers engineers to make more informed decisions in their projects.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

Ansys Maxwell serves as a powerful electromagnetic field solver tailored for electric machines, transformers, wireless charging systems, permanent magnet latches, actuators, and various electromechanical devices. It adeptly addresses the challenges of static, frequency-domain, and time-varying electric and magnetic fields. Additionally, Maxwell comes equipped with specialized design interfaces specifically for electric machines and power converters. With the capabilities of Maxwell, users can accurately analyze the nonlinear and transient behaviors of electromechanical components, as well as their impact on drive circuits and control system designs. By utilizing Maxwell’s state-of-the-art electromagnetic field solvers in conjunction with integrated circuit and systems simulation technologies, engineers can gain insights into the performance of electromechanical systems well before any physical prototypes are created. Moreover, Maxwell is recognized for delivering reliable simulations of low-frequency electromagnetic fields pertinent to industrial components, making it a valuable tool in the design and analysis process. This comprehensive approach not only enhances design efficiency but also aids in minimizing potential issues during the development stage.

Experience the simulation of fluid dynamics, thermal transfer, and fluidic forces that are essential for achieving the desired outcomes of your projects. SOLIDWORKS® Flow Simulation is a user-friendly Computational Fluid Dynamics (CFD) tool integrated within SOLIDWORKS 3D CAD, allowing you to swiftly and effortlessly model the behavior of liquids and gases flowing through and around your designs to assess product efficacy and functionality. The SOLIDWORKS® suite is designed for ease of use, promoting a seamless collaboration that enhances your ability to create products in a more efficient and cost-effective manner. Through SOLIDWORKS Flow Simulation, you and your colleagues can replicate fluid movement, heat distribution, and the associated forces critical for your product's triumph. Organizations of varying sizes require cohesive solutions to foster innovation and advance their operations. By employing integrated CFD capabilities, you can effectively evaluate the impacts of fluid dynamics, thermal exchange, and associated forces on your projects, while also enabling the exploration of multiple "what if" scenarios to facilitate rapid design optimization. This approach not only enhances product quality but also accelerates the overall development process.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

Energy2D is an interactive multiphysics simulation program grounded in computational physics, designed to model the three primary modes of heat transfer: conduction, convection, and radiation, while also integrating particle dynamics. This software operates efficiently on a wide range of computers, simplifying the process by removing the need for switches between preprocessors, solvers, and postprocessors that are usually necessary for computational fluid dynamics simulations. Users can create "computational experiments" to explore scientific hypotheses or address engineering challenges without the need for intricate mathematical formulations. Additionally, development is ongoing to introduce various energy transformation types and to enhance support for different fluid types. While Energy2D excels in accurately modeling conduction, its representations of convection and radiation are not entirely precise, which means results involving these elements should be regarded as qualitative. Over 40 scientific papers have utilized Energy2D as a valuable research instrument, showcasing its adoption in the academic community. As the program evolves, its capabilities are expected to expand further, potentially offering more comprehensive insights into complex physical interactions.

Renowned for its exceptional durability, CFX stands out as the premier CFD software for turbomachinery applications. Its solvers and models are integrated into a sleek, user-friendly, and adaptable graphical interface that offers extensive options for customization and automation through session files, scripting, and an advanced expression language. The software's highly scalable high-performance computing capabilities significantly accelerate simulations for various equipment, including pumps, fans, compressors, and turbines. Recent advancements in manufacturing techniques have enabled the development of more efficient turbine cooling channel geometries, which, while more intricate, promise enhanced performance and efficiency. In pursuit of precise results, a group of engineers from Purdue University opted for Ansys CFX to conduct their simulations. They executed critical calculations with minimal delay, allowing them to delve deeper into comparative analyses and run additional simulations, which ultimately led to a more thorough optimization of their product. This efficiency not only improved their workflow but also contributed to innovative solutions in turbine design.

AKL FlowDesigner is an advanced computational fluid dynamics (CFD) software that facilitates wind analysis by allowing users to effortlessly import 3D models of structures or urban blocks created with modeling applications like Autodesk Revit, GRAPHISOFT ARCHICAD, Rhinoceros, and SketchUp. This software supports BIM capabilities in IFC format, making it a valuable tool for architects, designers, engineers, and consultants who can leverage it early in the design phase to comprehend and visualize airflow around their projects. By conducting early analyses, professionals can significantly decrease design time while also making a strong impression on their clients. The CFD simulations offered by AKL FlowDesigner provide substantial advantages in the architecture, engineering, and construction (AEC) sectors. Previously, simulating airflow was a daunting and time-intensive process that necessitated extensive technical expertise; however, with AKL FlowDesigner, users can easily create simulations and analyze airflow within minutes, eliminating the need for an engineering background or intricate calculations. This user-friendly approach opens up the world of CFD to a broader audience, empowering more individuals to enhance their design projects.

Ansys Exalto serves as an advanced post-LVS RLCk extraction software that empowers integrated circuit (IC) designers to effectively address unknown crosstalk between various components within the design hierarchy by extracting lumped-element parasitics and creating precise models for electrical, magnetic, and substrate coupling. This tool seamlessly integrates with a wide range of LVS software and can enhance the performance of any RC extraction tool you prefer. With Ansys Exalto's post-LVS RLCk extraction capabilities, IC designers are equipped to make accurate predictions regarding electromagnetic and substrate coupling effects, allowing for signoff on circuits that may have previously been deemed "too complex to analyze." The models that are extracted can be back-annotated to the schematic or netlist, ensuring compatibility with all circuit simulators. As the prevalence of RF and high-speed circuits continues to rise in contemporary silicon systems, electromagnetic coupling has become a primary factor that necessitates precise modeling to ensure the successful fabrication of silicon. Overall, Ansys Exalto represents a crucial advancement in circuit design, helping engineers navigate the complexities associated with modern electronic systems.

Calculate fluid flow quickly and accurately. The Pipe Flow Calculator will be a valuable tool for engineers, students and professionals who work with fluid dynamics. It solves fluid flow problems, both simple and complex, in under a second. Why Choose Pipe Flow Calculator? Easy to Use: Just enter values to get instant results. Trusted worldwide - used daily by thousands professionals. Reliable and Updated - Bug fixes in 1-2 days. Transparent Calculations: All formulas are provided. Key Features Change between imperial and metric units. Choose pipes, materials and fluids on predefined lists. Export results to Excel & Word. Save, print and continue where you left. Copy/paste the full calculation reports. Available Calculators Pressure Drop, Pump Performance, Pipe Diameter and Reynolds Number Orifice Plates, Venturi Tubes, Nozzles, Prandtl Probe Control Valve, LPG, Thermal Energy

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

Utilizing the distinctive and inherently dynamic Lattice Boltzmann-based physics, the PowerFLOW CFD solution conducts simulations that effectively replicate real-world scenarios. With the PowerFLOW suite, engineers can assess product performance at the early stages of design, before any prototypes are constructed—this is when alterations can have the most substantial effects on both design and budget. The PowerFLOW system seamlessly imports intricate model geometries and conducts aerodynamic, aeroacoustic, and thermal management simulations with high accuracy and efficiency. By automating domain discretization and turbulence modeling along with wall treatment, it removes the need for manual volume meshing and boundary layer meshing. Users can confidently execute PowerFLOW simulations using a large number of compute cores on widely utilized High Performance Computing (HPC) platforms, enhancing productivity and reliability in the simulation process. This capability not only accelerates product development timelines but also ensures that potential issues are identified and addressed early in the design phase.

Altair Activate is utilized to model and simulate a diverse array of products as interconnected systems, facilitating the discovery of improved designs at an accelerated pace. As products across various sectors grow more intricate, electrified, intelligent, and interconnected, the need for advanced simulation tools becomes paramount. By leveraging multi-disciplinary system-level simulation capabilities, designers can develop sophisticated mechatronic systems more holistically, fostering enhanced collaboration and streamlined workflows among product development teams. Altair Activate effectively eliminates barriers between various subsystems, including mechanical, electrical, control, and electronic components, as well as software and hardware-in-the-loop interactions, alongside data analytics. Utilizing 1D modeling and simulation for thermal-fluid system dynamics allows for nearly equivalent accuracy to traditional 3D CFD methods, while significantly reducing timeframes, thereby promoting extensive design exploration and performance optimization more efficiently. This innovative approach not only speeds up the design process but also empowers teams to create more integrated and efficient product solutions.

Experience the full spectrum of heat transfer processes, encompassing convection, radiation, storage, and dissipation, while addressing both steady-state and transient environmental conditions. TAITherm thermal analysis software combines simplicity with robust capabilities, effectively handling solar and thermal radiation, convection, and conduction in various dynamic environments. By alleviating the complexities associated with thermal simulations, TAITherm guarantees that your designs will perform at their best in practical situations. Engineers and teams worldwide rely on TAITherm, utilizing it for diverse applications that span cutting-edge developments in fields such as automotive, electronics, wearables, military technology, architecture, and beyond. Our clients are at the forefront of innovation, leveraging thermal simulations and analysis to enhance usability, safety, and efficiency in their respective domains, ultimately pushing the limits of technological advancement. With TAITherm, the future of thermal analysis is not only accessible but also transformative for industries striving for excellence.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

Advance your RF simulation capabilities to effectively design, analyze, and verify radio frequency integrated circuits (RFICs) beyond conventional methods. Gain assurance through the use of steady-state and nonlinear solvers tailored for both design and verification processes. Accelerate the validation of intricate RFICs with wireless standard libraries designed for efficiency. Ensure precise modeling of components on silicon chips to achieve optimal accuracy. Enhance your designs using load-pull analysis and parameter sweeps for better performance outcomes. Conduct RF simulations within the Cadence Virtuoso and Synopsys Custom Compiler environments to streamline your workflow. Employ Monte Carlo simulations and yield analysis to further boost performance metrics. Early in the design phase, evaluate error vector magnitude (EVM) in alignment with the latest communication standards to ensure compliance. Leverage cutting-edge foundry technology right from the start of your project. It is essential to monitor specifications like EVM through RF simulation during the early stages of RFIC design. The simulations account for the effects of layout parasitics, intricate modulated signals, and digital control circuitry. Utilizing Keysight RFPro Circuit allows for comprehensive simulation in both frequency and time domains, enhancing the overall design process and accuracy. This multifaceted approach ensures that your RFICs not only meet but exceed industry standards.

Certified by Foundry, the AFS Platform provides nm SPICE accuracy, achieving speeds five times greater than conventional SPICE and more than twice as fast as parallel SPICE simulators. It stands out as the quickest nm circuit verification platform suitable for analog, RF, mixed-signal, and custom digital circuits. The latest addition of eXTreme technology enhances its capabilities. Specifically designed for large post-layout circuits, the AFS eXTreme technology accommodates over 100 million elements and operates three times faster than typical post-layout simulators. It is compatible with all leading digital solvers. With its top-tier usability, the platform maximizes the reuse of existing verification infrastructures, while its advanced verification and debugging features significantly enhance verification coverage. This results in improved design quality and reduced time-to-market. The platform guarantees SPICE accuracy and offers high-sigma verification, being a staggering 1000 times faster than brute-force simulation methods. It is user-friendly and easy to deploy, with access to AFS eXTreme technology provided at no extra cost; thus, it represents a comprehensive solution for modern circuit verification needs.

Cadence®, Sigrity X PowerSI® technology helps you to tackle increasingly difficult issues related switching noise, signal coupling and target voltage levels. It provides fast, accurate and detailed electrical analyses of full IC packages and PCBs. It can be used to develop power and signal integrity guidelines before layout, or after layout to verify performance and improve the design without a prototype. Sigrity X's electromagnetic (EM) solver technology allows you to perform a wide range of studies, including identifying trace and via coupling problems, power/ground fluctuation caused by simultaneously switching out put, and designing regions that are below or above voltage targets. PowerSI technology allows you to extract frequency-dependent parameter models for network networks and visualize complex spatial relationships.

Advance your approach to RF simulation by focusing on the comprehensive design, analysis, and verification of radio frequency integrated circuits (RFICs). Gain assurance through the use of steady-state and nonlinear solvers for both design and verification processes. The availability of wireless standard libraries expedites the validation of intricate RFICs. Prior to finalizing an RFIC, it is essential to confirm IC specifications through RF simulation. These simulations take into account various factors such as layout parasitics, intricate modulated signals, and digital control circuitry. With PathWave RFIC Design, you can perform simulations in both frequency and time domains, facilitating seamless transitions between your designs and Cadence Virtuoso. Achieve accurate modeling of components on silicon chips, and enhance your designs using optimization techniques like sweeps and load-pull analysis. Integration of RF designs into the Cadence Virtuoso environment is streamlined, while the implementation of Monte Carlo and yield analysis can significantly boost performance. Additionally, debugging is made easier with safe operating area alerts, allowing for immediate utilization of cutting-edge foundry technology to stay at the forefront of innovation. This holistic approach to RFIC design not only improves efficiency but also elevates the overall quality and reliability of the final products.

Cadence®, Sigrity X OptimizationPI™ technology performs a complete AC frequency analyzer of boards and IC package to ensure high performance and save between 15% and 50 % in decoupling capacitor costs. It supports both pre-and post-layout studies and quickly pinpoints the most cost-effective decap selections. Sigrity X OptimizePI is based on proven Cadence hybrid magnetic circuit analysis technology combined with the unique Sigrity Optimization engine to help you quickly identify the best possible placement and decap locations.

Create your photonic integrated circuit within a layout-focused workflow that allows designers to utilize either a drag-and-drop interface or a script-based approach. Both methods are facilitated by a comprehensive custom IC design layout editor, which also manages the physical verification and tape-out stages. L-Edit Photonics allows for rapid photonic design creation through its intuitive drag-and-drop functionality, eliminating the need for coding. Upon finalizing the design, a netlist can be generated to support photonic simulations. The PIC design is entirely integrated within an IC layout editor, enabling users to develop layouts without writing any code, thus supporting a layout-centric approach that does not require a schematic. For those who prefer a schematic flow, S-Edit is available as an optional tool. Moreover, a simulation netlist can be produced for input into a photonic simulator, and photonic simulations are seamlessly incorporated through partnerships with various providers. Additionally, multiple foundries offer photonic PDKs to enhance design capabilities. Overall, this comprehensive workflow simplifies the photonic design process while catering to various designer preferences.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

Embrace the future with the Sigrity X Platform, where cutting-edge innovation harmonizes with peak optimization. Gain access to unparalleled signal and power integrity for your PCB and IC package designs, propelling you far past the existing boundaries of signal integrity (SI) and power integrity (PI) technology. Picture yourself skillfully navigating the intricate challenges of electronic design, achieving not just your targets but exceeding them with remarkable efficiency and accuracy. With Sigrity X, you’re engaging with a transformative tool that fosters a seamless integration of in-design analysis within the Allegro X PCB and IC Package platforms. Immerse yourself in an extensive array of SI/PI analysis, in-design interconnect modeling, and PDN analysis tools that are specifically engineered to elevate your performance, ensuring that your projects consistently surpass expectations and stay within timeframes and budgets. Leverage the capabilities of the Sigrity X Platform to guarantee exceptional performance and reliability in your upcoming designs, setting a new standard for success. This is your opportunity to redefine what is possible in electronic design and lead the way in innovation.

The engineering standard pipe flow software allows you to manage the entire fluid system's lifecycle. Pipe flow analysis software that is industry leading in accuracy, functionality, and usability. No spreadsheets or hidden costs. Must-read for those who manage, design or operate mission critical fluid processing environments. The cornerstone of the digital transformation journey towards Industry 4.0/Digital Twin Operations Management.

Enhance engineering processes with the only comprehensive and user-friendly CFD platform designed for multidisciplinary design and optimization. Computational fluid dynamics (CFD) plays a crucial role in multiphysics system analysis, allowing for the simulation of fluid behavior and thermodynamic characteristics through advanced numerical models. Engineers leverage the Cadence Fidelity CFD platform for various design tasks, including propulsion, aerodynamics, hydrodynamics, and combustion, to enhance product efficiency while minimizing the need for costly and time-intensive physical testing. This robust Fidelity CFD platform offers a seamless end-to-end solution tailored for applications across aerospace, automotive, turbomachinery, and marine sectors. With its efficient workflows, massively parallel architecture, and cutting-edge solver technology, the platform delivers remarkable performance and accuracy, significantly boosting engineering productivity in addressing contemporary design challenges. Ultimately, Fidelity stands out by not only simplifying complex processes but also enabling engineers to innovate rapidly and effectively.

Ansys HFSS is a versatile 3D electromagnetic (EM) simulation tool used for the design and analysis of high-frequency electronic devices such as antennas, interconnects, connectors, integrated circuits (ICs), and printed circuit boards (PCBs). This powerful software allows engineers to create and evaluate a wide range of high-frequency electronic products, including antenna arrays, RF and microwave components, and filters. Renowned among engineers globally, Ansys HFSS is essential for developing high-speed electronics utilized in various applications like communication systems, advanced driver assistance systems (ADAS), satellites, and Internet of Things (IoT) devices. The software's exceptional performance and precision empower engineers to tackle complex challenges related to RF, microwave, IC, PCB, and electromagnetic interference (EMI) issues. With a robust suite of solvers, Ansys HFSS effectively addresses a myriad of electromagnetic challenges, making it an indispensable resource in the field of electronic design. As technology progresses, the relevance of such simulation tools becomes increasingly critical in ensuring optimal performance in modern electronic systems.

Ansys Cloud Direct’s powerful, easy-to-access HPC cloud solution will change the way you think about simulation. Unlike other simulation cloud solutions, Ansys Cloud Direct is simple to set up and navigate, will not break your workflow and does not require cloud experts to operate. Ansys Cloud Direct is all about Workflow, Performance, Support.

FloCAD® serves as an add-on module for Thermal Desktop®, creating a comprehensive software solution for thermohydraulic analysis that encompasses fluid flow and heat transfer. The process of constructing fluid flow models in FloCAD closely resembles that of thermal models, allowing for the use of numerous shared commands across both model types. Users can create FloCAD models using a free-form approach, which allows for the simplification and abstraction of flow networks, or they can opt for geometry-based modeling that incorporates elements like pipe centerlines, cross-sections, and intricate vessels, as well as convection calculations linked to finite difference or finite element thermal structures. As an advanced tool for pipe flow analysis, FloCAD effectively accounts for pressure losses within piping networks arising from bends, valves, tees, and variations in flow area, among other factors. This versatility makes FloCAD a valuable asset for engineers looking to optimize system designs.

Altium's PDN Analyzer tool integrates with Altium Designer. This allows you to easily troubleshoot issues such as insufficient or excessive copper or uncontrolled voltage drops. You can also detect marginal voltage at critical power points, copper islands or peninsulas, and other issues that could be present in your PCB power system. PDN is the power system for active circuits on printed circuit boards. This includes all interconnections between the voltage regulator module, the metallization pads and die on integrated devices that are used for supply and return power. The entire length of the power delivery network must meet the IC supply voltage limits. Validating your power budget accurately means taking into account the minimum and maximum device limits, worst case voltage drops, combined return-path currents, and other factors. PDN Analyzer will show you exactly where these problems are.

Creating designs at advanced process nodes necessitates a novel approach to place-and-route to handle the growing intricacies involved. Aprisa stands out as a detail-route-focused physical design platform tailored for contemporary SoCs. Operating as a complete RTL2GDSII solution, Aprisa facilitates digital implementation by providing comprehensive synthesis and place-and-route capabilities for both top-level hierarchical designs and block-level executions. Its alignment with signoff tools for STA timing and DRC offers tape-out quality correlation, which minimizes design closure challenges while ensuring peak performance, power efficiency, and area optimization (PPA). With its out-of-the-box performance, Aprisa enables physical designers to streamline each phase of the place-and-route process, accelerating their time-to-market. The unified architecture and shared analysis engines within Aprisa guarantee outstanding timing and DRC correlation throughout implementation stages and with signoff tools, significantly cutting down on the required flow iterations and engineering change orders (ECOs). As a result, this innovative approach ultimately enhances both productivity and design quality in complex projects.

Sigrity X Advanced SI Technology offers advanced signal integrity analysis for PCBs and IC packaging, covering DC up to 56GHz, with features such as automated die-todie SI analysis, topology exploring, and simulation of high-speed interfaces. It supports IBIS-AMI and customizable compliance kits to ensure that your designs meet rigorous standards.

Oasys-RTL meets the demand for enhanced capacity, quicker runtimes, elevated quality of results (QoR), and physical awareness by performing optimization at a more abstract level while also incorporating integrated floorplanning and placement features. This tool significantly improves the quality of results by facilitating physical accuracy, efficient floorplanning, and rapid optimization cycles, ensuring timely design closure. Its power-aware synthesis capabilities encompass support for multi-threshold libraries, automatic clock gating, and a UPF-based multi-voltage domain flow. During the synthesis process, Oasys-RTL intelligently inserts the necessary level shifters, isolation cells, and retention registers according to the power intent specified in the UPF framework. Additionally, Oasys-RTL can generate a floorplan directly from the design's RTL by applying dataflow and adhering to timing, power, area, and congestion constraints. It adeptly incorporates regions, fences, blockages, and other physical directives via advanced floorplan editing tools while automatically positioning macros, pins, and pads to optimize the layout. This holistic approach ensures that designers can efficiently manage complex designs and meet stringent performance requirements.

Precision provides a vendor-independent solution for FPGA synthesis, ensuring top-tier performance and area efficiency while offering robust design capabilities paired with strong connections to simulation and formal equivalency checking tools. Its products integrate seamlessly with Siemens' FormalPro LEC for equivalency verification and HDL Designer, facilitating design capture and verification in conjunction with ModelSim/Questa. The entry-level FPGA synthesis tool, Precision RTL, delivers exceptional quality results as a vendor-agnostic solution. In response to the needs of space and military aerospace applications, which often require specialized FPGAs equipped with inherent protection against SEEs, NanoXplore has launched new FPGA offerings aimed at this sector. Collaborating closely with NanoXplore, Precision Synthesis is the first to provide comprehensive synthesis support for the NG-Ultra device. Additionally, Precision boasts seamless integration with the NXmap place and route tool, effectively completing the design workflow from RTL through to gates and ultimately to bitstream generation. This integration not only streamlines the development process but also enhances the reliability of the final product, ensuring it meets industry standards.

Adaptive Research is excited to unveil the CAESIM 2024 simulation platform, which is now available for immediate use, featuring enhanced computational fluid dynamics modeling along with multi-physics functionalities. This latest software version introduces innovative tools and features designed to streamline the modeling process, enabling CFD engineers to achieve rapid simulation results with greater efficiency. Additionally, the platform aims to enhance user experience through improved interfaces and capabilities.

Kombyne™ represents a cutting-edge Software as a Service (SaaS) tool designed for high-performance computing (HPC) workflows, originally tailored for clients in sectors such as defense, automotive, aerospace, and academic research. This platform empowers users to access a diverse array of workflow solutions specifically for HPC computational fluid dynamics (CFD) tasks, encompassing features like on-the-fly extract generation, rendering capabilities, and simulation steering options. Users can benefit from interactive monitoring and control functionalities, all while ensuring minimal disruption to simulations and eliminating reliance on VTK. By employing extract workflows, the necessity for handling large files is significantly reduced, allowing for real-time visualization. The system incorporates an in-transit workflow that utilizes a distinct process to swiftly receive data from the solver code, enabling visualization and analysis without hindering the operation of the running solver. This specialized process, referred to as an endpoint, facilitates the direct output of extracts, cutting planes, or point samples useful for data science, in addition to rendering images. Furthermore, the Endpoint serves as a conduit to widely-used visualization software, enhancing the overall usability and integration of the tool within various workflows. With its versatile features and ease of use, Kombyne™ is set to revolutionize the way HPC tasks are managed and executed across multiple industries.

Simcenter STAR-CCM+ is an advanced multiphysics computational fluid dynamics (CFD) software that enables the simulation of products in conditions that mimic real-life scenarios. This software stands out by incorporating automated design exploration and optimization into the CFD toolkit accessible to engineers. With a unified platform that encompasses CAD, automated meshing, multiphysics CFD capabilities, and advanced postprocessing, it empowers engineers to thoroughly investigate the entire design landscape, facilitating quicker and more informed design choices. By leveraging the insights offered by Simcenter STAR-CCM+, the design process becomes more strategic, ultimately resulting in innovative products that surpass customer expectations. Enhancing a battery's performance across its complete operating spectrum is a complex endeavor that necessitates the concurrent optimization of various parameters. In this context, Simcenter delivers a comprehensive simulation environment tailored for the analysis and design of electrochemical systems, fostering a deeper understanding of their behavior. This holistic approach allows engineers to tackle intricate challenges with confidence and precision.

ESS has gained significant traction in the automotive sector due to our specialized solutions tailored for this niche market. As our offerings thrived in a highly competitive landscape, ESS expanded into the “on-demand” sector. With the introduction of the alsim cloud, we are accomplishing unprecedented feats in the realm of simulation technology. Our pay-per-use simulation tools are accessible to all users, regardless of their CFD background, allowing students, engineers, and businesses to leverage our advanced techniques to enhance their projects. In addition to our offline products, we cater to diverse industries by providing solutions and detailed reports derived from our simulation outputs. We engage in close collaboration with our clients to understand their specific needs and challenges, ensuring they receive precise simulation results tailored to their requirements. Drawing from our extensive experience with industrial processes and our powerful solvers, we have successfully supported several leading OEMs around the globe. This dedication to customer satisfaction and innovation continues to drive our growth and influence in the industry.

Enhance your decision-making process with Tecplot 360, the ultimate CFD post-processing tool. As more CFD simulations are conducted and grid sizes expand, the necessity for effective handling of large data sets and automated workflows becomes increasingly important. With Tecplot 360, you can reduce idle time and focus on discovering new insights. The software allows for seamless integration of XY, 2D, and 3D plots, giving you the flexibility to design visuals according to your specifications. Present your findings through stunning images and dynamic animations to captivate your audience. Simplify repetitive tasks using PyTecplot Python scripting to enhance productivity. Ensure that you never overlook important results while analyzing parametric data with the powerful Chorus tool. Access vast remote data securely through the SZL-Server client-server connection. Tecplot 360 supports a wide array of data formats including Tecplot, FLUENT, Plot3D, CGNS, OpenFOAM, FVCOM, VTU, and over 22 others related to CFD, FEA, and structural analysis. Additionally, you can efficiently report and compare multiple solutions in a multi-frame setup with various pages, allowing for comprehensive analysis and presentation. The software's versatility makes it an indispensable asset for any data-driven professional.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

Stallion 3D rapidly produces aerodynamic performance metrics, including lift, drag, and moments, for both new and existing CAD models. It offers exceptional RANS results without the need for manual grid creation, as the grid generation process within Stallion 3D is entirely automated. This feature effectively removes one of the most time-consuming challenges in computational fluid dynamics (CFD). Utilizing its unique CFD algorithm known as HIST, Stallion 3D accurately forecasts the aerodynamic characteristics of your designs. The software seamlessly imports CAD models and generates the necessary 3D aerodynamic data to validate your designs and support your success. It provides detailed reports on lift and drag forces, as well as yaw, roll, and pitch moments along specified coordinate directions. Additionally, it includes 2D line graphs that illustrate Cp, velocity, Mach number, density, and temperature at constant coordinate locations across the STL surface, allowing users to visualize parameters such as Cp (x) at various span locations along the wing. Overall, Stallion 3D streamlines the aerodynamic analysis process, making it more efficient for designers to achieve optimal performance.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

Ingrid Cloud is an online tool which automates the entire process for wind simulations. Our computational model requires virtually no human intervention. It is easy to use and accurate. CFD is easy and affordable with us. This unique technology is based upon research at KTH Royal Institute for Technology over the past 15 years.