Alternatives to hAP ax³

Mobile internet has never been more accessible. Chateau 5G version 6 Chateau 5G is now faster wireless, has a better CPU, and offers 2.5 Gigabit Ethernet. The new Chateau looks very similar to the older models. Chateau 5G ax is capable of delivering unprecedented speed thanks to Wave 2 support and the Generation6 802.11ax wireless standards. Comparing it to the previous generation, we can see up to 40% faster in the 5GHz spectrum and up to 90% more in the 2.4GHz spectrum. Massive improvements have been made to the wireless radios and antennas. Chateau 5G ax supports MIMO4x4 on 5G or LTE. There are 6 LTE/5G built-in antennas. One pair of external antennas gives you better wireless network coverage in larger homes and the other provides enhanced LTE/5G connectivity. The ports had to be able to cope with such high speeds. We retained four Gigabit Ethernet ports, and added a 2.5 Gigabit Ethernet connection to the top. The USB can be very useful for storage purposes.

The best home AP just got better Chateau LTE18 version 6 Chateau LTE18 is now available with 2.5 Gigabit Ethernet. Chateau LTE18 Ax can offer unprecedented speed thanks to Wave 2 support and the Generation6 802.11ax wireless standards. Comparing it to the previous generation, we can see up to 40% faster in the 5GHz spectrum and up to 90% more in the 2.4GHz spectrum. Massive improvements have been made to the wireless radios and antennas. Chateau LTE18 ax supports MIMO4x4 on LTE. For exceptional coverage throughout your entire home, there are 4 LTE antennas built in and 2 external network antennas. The ports had to be able to handle such high speeds. We retained four Gigabit Ethernet ports, and added a 2.5 Gigabit Ethernet connection to the top. The USB can also be useful for storage purposes. Heavy operations are made possible by the modern quad-core CPU at 1.8GHz and solid GB RAM.

We doubled the usual performance. Based on feedback from the MikroTik User Meetings, we created the perfect home lab router: compact and powerful with multiple power options and efficient cooling. RB5009 has all of this and more! The board has 9 wired ports as well as a full-sized USB 3.0. Seven ports are Gigabit Ethernet while another is 2.5 Gigabit Ethernet. The last port is a 10G SFP+ enclosure. All ports are connected with a Marvell Amethyst family Switch-chip that has a 10 Gbps full duplex line and leads to the Marvell Armada Quadcore ARMv8 1.5 GHz CPU. The switch-chip and CPU are located on the bottom side of the board. The case acts as a heat sink! The boards come with 1GB DDR4 RAM and 1GB NAND storage. This combination of ports, components and processors is almost twice as fast in configurations that have heavy CPU loads than other products in the same form factor.

The hAP AX lite is the perfect solution for those who need to reduce costs but don't want to compromise on performance. The new Gen6 AX wireless chip lets you squeeze every bit of the traditional 2.4GHz spectrum like a lemon. Depending on your setup, you can expect a speed increase of up to 90% This is a great tool for expanding businesses or hotels that require scalable setups. The attractive price, compact size and strong set of features make it easy to add more devices. For your next vacation, why not bring a hAP Ax lite? It takes up very little space in your luggage and allows you to bypass the restrictive guest networks. Our hAP-lite devices are all about value. The 256 MB RAM, a modern ARM CPU at 800 MHz, 4x Gigabit Ethernet port, and a much higher dual-chain antennagain (up to 4.3 dBi) make this a great value device. The new hAP Ax lite is a true trailblazer in value and affordable networking.

The Generation 6 wireless network, our latest addition to the hAP series, is now available to supercharge your home network. The hAP ax2 is everything you could want in a primary home access points - and more! This is the perfect device for 99 percent of homes, so forget about endless comparisons and reviews. The wireless signal is stronger than ever. The two main ingredients for hAP-ax's success are a state of the art dual-band, dual–chain 4-4.5 dBi radio and the 802.11ax standard, with Wave2 support. Let's look at the previous generation. Depending on your setup, this means that you can get up to 40% faster in the 5GHz spectrum and up to 90% more in the 2.4GHz spectrum. You might wonder why we need faster wireless speeds. Many use cases are possible now that wireless speeds are higher than they were previously. You can now work with large media files over the wireless internet without having to download or upload everything.

The OWL 4G family, compatible with all cellular frequencies worldwide, is designed to provide next-level security and cellular connectivity in virtually any environment. The OWL 4G family's edge computing configuration allows industrial customers remote monitoring and troubleshooting of machines without having to go on-site. The OWL 4G family is flexible and adaptable due to its web interface that allows for advanced customization. High-speed wireless connectivity, reliable remote access, and technology specifically designed for machine-to-machine (M2M), communications. With an intuitive web interface and open Linux platform, it is easy to customize based on your application needs. Secure VPN tunneling (OpenVPN or IPsec VPN) provides enhanced security. Industry 4.0 and Industrial IoT Cellular Routers and Gateways. Optimized to support 4G applications using edge pre-computing. VPN and programmable extendable Linux.

1U rackmount. 10xGigabit Ethernet. SFP. USB 3.0. LCD. PoE out on port 10. 2x1.4GHz CPU. 1GB RAM. RouterOS L5. The RB3011 multi-port device is our first to use an ARM architecture CPU. This allows for greater performance than ever. The RB3011 features ten Gigabit ports, divided into two switch groups, an SP cage, and a SuperSpeed full size USB 3.0 port. This port can be used to add storage or an external 3G/4G modem. The RB3011UiAS RM Unit includes a 1U rackmount enclosure, a touchscreen panel, and PoE output functionality on last Ethernet port. The operating system has been preinstalled and is licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years beginning from the date of purchase.

The HPE HSR6800 Series of multiservice routers is a family that provides high-performance, multiservice routing for data center interconnection, enterprise core, campus edge and high-speed, WAN aggregation services. It runs the Comware operating software and has a multi-core, distributed service processing hardware architecture capable of scaling up to 420 Mpps forwarding as well as up to 2Tbps switching capacity. The router offers robust routing, multicast and Multiprotocol Label Switching, (MPLS), IPv6, security and quality of service, as well as carrier-level high availability features and high-density interface options (10GbE or 1GbE). The fully modular Comware v7 network operating systems offers enhanced performance and system availability. Feature enhancements include ADVPN, EVI, EAA and ISSU. FIP-240 doubles the FIP210 forwarding performance and can be used to open up to 4 HIM/MIM slots. Line cards provide 1GbE combo/10bGE ports and enhanced IPsec performance. RT-HIM-2EXP doubles the density of HIM 10GbE ports and supports SFP+.

5x Gigabit Ethernet with Dual Core 880MHz CPU and 256MB RAM. USB, microSD, RouterOSL4. hEX is a five port Gigabit Ethernet router that can be used in locations without wireless connectivity. The device features a full-size USB port. The hEX has been updated with several performance improvements. It is small, lightweight, and easy to use. However, it has a dual-core 880MHz CPU with 256MB RAM and is capable of running all advanced configurations supported by RouterOS. IPsec hardware encryption (470Mbps) and The Dude package are supported. The microSD slot on it allows for faster file storage and Dude. The operating system is preinstalled on the device and licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years beginning from the date of purchase.

SCALANCE M includes both wired and mobile wireless routers. These routers are well-suited for industrial remote access applications. SCALANCE M mobile wireless routers allow both stationary and mobile stations to be connected to a central control system and monitoring system via 3G, 4G, or LTE. The SCALANCE M product line includes wired routers that allow for secure, cost-effective connections to remote machines and plants via SHDSL, ADSL or PROFIBUS/MPI. SCALANCE M accessories include a variety of mobile wireless antennas that can be used for different purposes. The SCALANCE M industrial routers are universally compatible with telecontrol, remote service, and other applications for industrial remote communication. SCALANCE M industrial routers allow remote machines and plants access to public or private remote networks. Wireless communication can be done using GSM (2G), UMTS (33G), or LTE (4G), or wired via ADSL or SHDSL.

This CCR, like the other models in the CCR2004 series also features the Amazon Annapurna Labs Alpine v2 processor with 4x 64 bit ARMv8–A Cortex–A57 cores. The router can run at 1.2 GHz while the CPU is still running at 1.2 GHz. However, it can be 3x faster than the previous generation CCR's. This is the silent powerhouse. You can enjoy all the power and tranquility of a CCR in peace. You can get rid of the hum and buzz in your studio, homelab, server room, or office without sacrificing performance. The new router features 18 wired ports, including 16x Gigabit Ethernet port and two 10G SFP+ boxes. The router also features a RJ45 console port on its front panel. Each group of 8 Gigabit Ethernet ports are connected to a separate Marvell Amethyst family switching-chip. Each switch chip has a 10Gbps full-duplex line connecting to the CPU. The same applies to each SFP+ cage, which has a separate 10 Gbps full duplex line. The boards come with 4GB DDR4 RAM and 128MB NAND storage.

The RB4011 series - incredibly powerful routers with ten Gigabit ports and SFP+ 10Gbps interface, IPsec hardware acceleration and IPsec hardware acceleration at a great price! The RB4011 is powered by a quad-core Cortex A15 CPU. This is the same processor as our carrier grade RB1100AHx4 unit. The unit comes with 1GB RAM and can provide PoE output on Port #10. It also has a professional-looking solid metal enclosure in matte dark. The RB4011iGS+RM Ethernet model includes two rackmount ears to securely attach the unit to a standard 1U rack space.

Introducing RB1100AHx4, 13x Gigabit Internet ports Router. It is powered by Annapurna Alpine AL21400 CPU, with four Cortex-A15 cores. This allows for a maximum throughput up to 7.5Gbit. The device supports IPsec hardware acceleration, up to 2.2Gbps with the AES128. The unit comes with a 1U rackmount case, RS232 serial ports and dual redundant power supplies (with –48v DC telecom power support and 802.3at/af). There are two models available. The RB1100AHx4 Dude Edition has several high-speed storage connectors (two SATA, two M.2) that can be used to access a Dude database, proxy cache, or any other storage-intensive feature. The Dude edition comes with a 60 GB M.2 hard drive already installed.

Our new flagship product, the Cloud Core Router 2216, is now available! Its powerful 16-core CPU can compete with the powerful 72-core Tile CPU from our previous flagship, the CCR1072. The Marvell Prestera Aldrin2 switch chip really takes it to the next level, with L3 Hardware offloading! The previous CCR2116 had a switch-chip that had four 10G CPU connection lines. This time, there are four 25G lines! There are two QSFP28 cages that provide 100 Gigabit connectivity at blazing speeds, twelve SFP28 cages that allow for 25 Gigabit networking and a Gigabit Ethernet connection. The device has 16 GB RAM, decent NAND storage, two M.2 SATA slot slots, and a Gigabit Ethernet port. There are four hot-swappable fans and dual-redundant hot–swap power sources. These PSUs may look familiar if your CCR1072 has been used before. You can continue to use your existing hot-swap power supply and SFP modules.

The 100 Gigabit switch is versatile and offers speed, value, as well as a variety of connectivity options. 2x 100 Gigabit QSFP28 ports and 8x 25 Gigabit Gigabit Gigabit SF28 ports. Dual hot-swap power sources. Remember our 100 Gigabit switches, CRS504 or CRS518? The versatile CRS510-8XS-2XQ - IN is now available to the MikroTik 100Gigabit product line. This handy switch features two 100 Gigabit QSFP28 ports as well as eight 25 Gigabit SP28 ports. This combination of ports will fit into almost any setup or server area. You can connect everything with various direct attach cables, active optical cable, copper RJ45's and CRS510. Backward compatibility will save you time, money, precious nerve cells, and your precious nerve cells. This unit supports all types of devices: 40 Gigabits, 25 Gigabits, 10 Gigabits, and even older Gigabit connections. We've also kept the console port, the sysadmin’s emergency tool, in place.

The new RB1100AHx4 dude edition features an Annapurna Alpine Al21400 CPU with four Cortex A15 Cores clocked at 1.4GHz each for a maximum throughput up to 7.5Gbps. The device supports IPsec hardware acceleration, and is faster than any other RouterBOARD device (upto 2.2Gbps with the AES128). The unit comes with a 1U rackmount case, 13x Gigabit Ethernet ports and RS232 serial ports. It also has dual redundant power supplies (with -48vDC telecom power and 802.3at/af) The RB1100AHx4 Dude Edition features four high speed storage connectors, two SATA and two M.2, which can be used to create a Dude database, proxy cache, or any other storage-intensive feature. It comes with a 60GB M.2 hard drive.

Cisco ASR 1000 Series Aggregation Service Routers offer a Software Defined WAN platform. They aggregate multiple WAN connections and network service including traffic management and encryption, and forward them across WAN connections at speeds of 2.5 to 200 Gbps. The industry-leading high-availability design of the routers includes both hardware and software redundancy. The Cisco ASR 1002-HX Router, and the Cisco ASR 1001–HX Router are the latest additions to Cisco's ASR 1000 Series. Both routers can support speeds up to 100 Gbps in 2-Rack-Unit (2RU), and 60 Gbps for 1-Rack–Unit (1RU). The ASR 1002-HX includes 8 10 Gigabit Ethernet ports (GE) and 8 1 GE ports. It also has the Ethernet Port Adapter slot (EPA) for expansion. The ASR 1001HX has 4 10 GE ports and 8 1 GE port, as well as 4 configurable 10 GE and 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 adds to the latest additions to the modular control plane engines of the Cisco ASR 1000 Series.

Juniper's SDWAN solution, which is designed to provide exceptional user experiences, uses the Session Smart™, Router. It is built on an application-aware, zero-trust secure network fabric and meets all enterprise performance, security and availability requirements. The router eliminates the inefficiencies inherent in traditional solutions by using a tunnel-free architecture. This allows for faster deployments, cost savings, and improved performance. The software solution is available on customer premises equipment (CPE), in data center network servers and in the cloud for flexible deployments. It can be centrally managed using the AI-driven Juniper SessionSmart Conductor platform or the Juniper Mist cloud. Application-aware routing, failsafe service delivery, orchestration, automation, and central management via the Juniper Mist Cloud and Session Smart Conductor are some of the benefits.

We wanted to maximize the power of 10G networking with a modern CPU. CCR2116-12G-4S+ lets you forget about CPU limitations in any setup. This router, like its older brother, the CCR2004 is powered by the Amazon Annapurna Labs Alpine processor. This CCR eats 16 cores at 2 GHz. We see at most a 15% improvement in single-core performance. This is especially important when it comes to heavy operations that are per-connection processed. Like queues, for example. CCR2116-12G-4S+ is a new standard in single-core performance across the entire CCR product line! It also supports Layer 3 Hardware Offloading! You will need the right connectivity to harness this power. There are four 10G SFP+ ports. They also have a full-duplex line that is connected to the Marvell Aldrin family switch chips. We also have Gigabit Ethernet ports. Twelve of them are running through Marvel's chip.

Our NetVanta 4000 Series is perfect for carrier bundled services up to 1Gbit/s and enterprise-class internet access for high-speed, secure corporate connectivity. There are several variations that add power over Ethernet (PoE), VPN, and/or voice monitoring services to the switch and VPN built-ins. All NetVanta 4000s are capable of providing eSBC functionality. This allows customers to have a truly converged platform. They can also grow via software to support as many calls as you need, supporting up 1000 calls. Our NetVanta 4148 has four routed, autosensing Gigabit interfaces. Two of these can be fiber-fed and one 8-port Gigabit Ethernet switch. These Gigabit interfaces are ideal for Ethernet redundancy and failover with instant failover if one link goes down. They can be LAN-facing or WAN-facing. Part number 17004148F1. Our NetVanta 4148 has an enhanced feature pack upgrade that allows you to support 500 VPN tunnels.

The "Improvise." Adapt. You can adapt. The CCR2004-1G-12S+2XS is a great option. It eliminates all connectivity problems and allows you to expand your setup as you wish. This router has 12 x 10G and 2 x 25G ports for SFP+. Our router with the best single-core performance is CCR2004-1G-12S+2XS. It delivers incredible results in single tunnel (upto 3.4 Gbps) as well as BGP feed processing. You can handle anything: 10G, 40G, and now 25G! Your networking setup will be unstoppable when paired with MikroTik multiport products such as CRS317-1G-16S+RM or CRS312-4C+8XG–RM or CRS326-24S+2Q+RM. Performance-wise, the CCR2004-1G-12S+2XS routers are comparable to the CCR1009/CCR1016. You can forget about any unexpected downtime with the dual redundant power supply.

Desktop metal case, 5xEthernet and 5xGigabit Ethernet. SFP cage. PoE out on port 10. 600MHz CPU. 64MB RAM. RouterOS L4. RB2011iLS is the first product to include a SFP cage for gigabit-sFP transceivers. It is an ideal solution for FTTH implementations. The RB2011iLS features 11 ports, Gigabit Ethernet ports and five Gigabit Ethernet port that can be connected together to provide a wire-speed fiber–to-copper converter and five additional fast Ethernet ports. The board can be powered via power jack or PoE. SFP transceiver not included. RB2011iLS supports 1.25G SFP transceivers within the SFF committee specifications. RB2011LS does not support passive optical network (PON) hardware support. Tested and recommended for use with MikroTik SFP Modules S-85DLC05D and S-31DLC20D (not include). It is powered by the Atheros Next Generation 600MHz 74K MIPS network processor, has 64MB RAM, and a Level4 RouterOS licence.

HUAWEI WiFi W5200 offers fast dual-band speeds of 1300Mbps (max 400 Mbps at 2 GHz + max 867Mbps at 5GHz). You can also connect to it via Gigabit Ethernet for the fastest and most consistent speeds. You can play online games without lag, stream high definition movies with no buffering and download large files almost instantly. HUAWEI WiFi W5200 can connect up to 64 devices. Your whole family can choose what they want to do online. This includes online learning, gaming, and video streaming. The HUAWEI WiFi W5200 has both 5 GHz and 2 GHz bands. For optimal use, your devices will automatically switch between 5 GHz or 2.4 GHz bands. 5 GHz is used for streaming and streaming at high speeds, while 2.4GHz offers greater coverage. Manage your Wi-Fi network and identify and fix any problems.

The Cisco Wireless Gateway to LoRaWAN (and the Cisco Interface Module for LoRaWAN) are available with Cisco Catalyst 1110 Rugged Series Routers. They enable IoT implementations that require low data rates and battery-powered devices to provide long-distance connectivity. These products are LoRa (long-range) and conform to LoRaWAN (long-range wide-area network) specifications. The gateway includes a digital signal processor (DSP), and a high-accuracy GPS specially designed for geolocation. An optional integrated cellular backhaul option is available via connectivity to a Cisco Catalyst Rugged Series Router. You can increase spectrum utilization by connecting to the module or 16 uplink channels via the gateway.

The core of the world's most powerful core and peering architectures are the PTX Series routers. They are powered by the latest generation Juniper Express family ASICs and cloud-optimized for smooth 400G migrations. They provide the flexibility, scale, and investment protection required to meet today's market demands. The routers provide native 400G inline MACSsec, flexible filtering, as well as a reliable network operating platform that has been powering high-performance solutions for generations. PTX routing can help you discover the 100G and 400G mass-scale cloud solutions. The PTX10008, PTX10008, PTX10016 Packet Transport Routers are modular solutions that address the huge bandwidth demands placed on networks. They provide high port density, native 400GbE MACsec and the latest-generation ASIC investment for the most demanding WANs and data centers.

The RB5009 version has all the bells & whistles of the previous model, including Gigabit Ethernet and 2.5 Gigabit Ethernet. There is also a 10 Gigabit SFP+ box for fiber connectivity. It has the speed and power as well as the durability. This time, we added PoE in & PoE out to all eight Ethernet ports. You get 10 different ways to power your device, thanks to the DC jack and the 2-pin connector. Dual redundant power supplies will usually increase your uninterrupted uptime. The RB5009UPr+S+IN is a step beyond that! All power options can support a wide voltage range from 24 to 57 V. However you cannot mix the voltages. If you use PoE-out to power another device, the board will choose to power them from the source with the highest voltage (DC Jack or 2-pin connector).

The HPE MSR95x Router Series delivers small-branch routing at high performance in a single cost-optimized form factor. With integrated routing, switching and wireless, security, voice, and voice, the HPE MSR95x Router Series can boost service delivery and simplify the management of the corporate-wide network (WAN). This series is easy to deploy with Zero Touch Provisioning and WAN options that include LTE connectivity. The MSR95x is compatible with Comware v7 and fiber connections. It also offers advanced services such as IPS, high encryption, and other performance features that are not available on modular routers. High-performance, converged fiber routing, switching and security. Integrated 1/10GbE and WAN, fiber (SFP), All in one: Integrated 4G LTE, 3G, and IEEE 802.11b/g/n WiFi. Embedded encryption, stateful firewalls, NAT, and ADVPN security features. Comware OS Zero-Touch Solution, Inified Comware, and Single-Pane-of Glass management.

You can save space by installing a real CCR2004.. inside your server! This unique product combines a 2x25 Gigabit PCIe Ethernet adapter and the impressive capabilities of a full-fledged router. The default configuration of the PCIe interface is to display four virtual Ethernet interfaces. Two interfaces are available in passthrough mode to the 25G SFP28 boxes. The remaining two virtual Ethernet-PCIe connections are connected to the Gigabit Ethernet port for management. Since we have fully functional RouterOS, the user can freely configure all interfaces and settings. A new Passthrough mode was created to allow this CCR device as an NIC. A FastForward FastPath mode which can also pass hardware link statuses. This NIC can reach wire speed (100Gbps), with Jumbo frames. This card ensures that the CCR network card is not the bottleneck in most server setups.

The HUAWEI WiFi AX2 is equipped with 5GHz and 2.5GHz bands. They operate simultaneously and switch devices between the 5GHz and 2.4GHz bands to ensure a stable connection. 5 GHz is best for streaming and streaming at high speeds, while 2.4 GHz offers greater coverage. Multiple routers can be linked together under one Wi-Fi name. This allows you to link your HUAWEI WiFiAX2 with other HUAWEI routers in your home. Automatic switching is possible as you move about. The HUAWEI WiFi AX2 has three Gigabit Ethernet ports. Each port supports WAN/LAN automatic-adaptation4, which saves you the effort of identifying them. This makes it easy to install broadband. AX2 allows you to check Wi-Fi coverage for your home, see the network status, and solve network problems by following the suggestions. You can manage your router from your smartphone in just a few clicks.

Allows local-like network access to eliminate latency. The Radical X™, a product family that is purpose-built for hybrid and multicloud high-performance computing organisations with a parallel file system, extends Remote Direct Memory Access over WAN and removes distance barriers to data access and movement. RAD X extends your local applications, infrastructure, and services across virtually any WAN, creating an infrastructure that is truly location-independent. It offers low-latency, high performance connectivity that allows businesses to control geographically dispersed computing and storage resources in real-time to speed up the time to insights and actions. RAD X provides strong security for your data. It can be configured to use single- or dual-line rate WAN encryption. This is done without increasing latency and reducing data throughput. DataPrizmTM, which distributes data over encrypted network paths, adds another layer of protection.

The Cisco CGR1000 provides security at multiple layers. The physical device can be approved for the network by a certificate-based identity check. The 802.1x Access control protects your network entry points. IPSec, FlexVPN and Transport Layer Enterprise Level Security are provided by IPSec. The CGR1000 is a horizontal platform that provides various industrial services. It enables Automated Metering (AM) and Distributed Automation (DA) for the utility sector. It also offers services for street lighting applications, substation automation and data from intelligent electronic device (IED) using data. The CGR1000 offers true multi-services for IoT industries by providing features like VLAN, VRFLite, and QoS.

Truffle is a Broadband Bonding router appliance. It intelligently manages multiple (2 to 16) Internet transports from any service provider. Truffle detects and adapts to fluctuations in ISP performance and changes in traffic profile. Truffle will automatically solve network problems and prevent interruptions to your Internet services. Truffle is the best way to increase your network bandwidth when you need it. To increase your network's capacity, simply plug in additional broadband lines. Relying on one service provider will limit your network SLAs. You can combine service providers to get the best of both worlds. This allows you to create your own best-in-class bandwidth by leveraging DSL's last-mile transport and cable modem bandwidth.

The HUAWEI WiFi AX3 Series routers offer a flexible networking solution. They support a variety of connection methods, including network cable networking and hybrid networking that combines both network cables and wireless. It intelligently manages network connections. It connects multiple devices to AX3 more efficiently than traditional routers. It supports OFDMA multi-user technology so it can send data to multiple devices at once.

The HPE MSR3000 Router Series features a modular design that provides unmatched application services for large branch offices. These routers provide Gigabit switching, an enhanced PCI bus, and ship with the Comware v7OS. They offer a full-featured resilient routing platform that includes IPv6 MPLS and up to 13 Mpps forwarding. They also offer 14.3 Gb/s IPSec VPN encrypted throughput to ensure high concurrent service performance. The MSR3000 Router Series supports a wide variety of virtualized applications through the Open Application Platform module. Its distributed architecture and high reliability increase the resilience of medium-sized branches. The MSR3000 series offers a flexible, agile network infrastructure that allows you to quickly adapt to changing business needs while simultaneously delivering integrated concurrent services from a single, easy to manage platform.

The Fiber Box Plus can be viewed in two ways. It's a major upgrade to our FiberBox devices. This version has a new ARM CPU, more RAM and four 10-Gigabit SFP+ port. You can get reliable and fast connectivity without breaking the bank. Without the limitations of Ethernet's distance. A Gigabit Ethernet port is available for management and PoE-in powering. You also get a 2-pin terminal as well as a standard DC Jack, giving you 3 power options. FiberBox Plus can accept input voltages from 24-57V. It is also extremely efficient, with a maximum power consumption of 7W (without attachments). The FiberBox Plus is a budget version for the incredible netFiber 9. If you don't require the additional Gigabit SFP ports, you can save a lot. It also features the same Marvell 98DX226S switch chip, which ensures that the performance is unbeatable!

The Nodegrid link SR gives you flexibility in your network operations. Its powerful components allow for flexible networking anywhere you need it. The compact design allows you to store it away to save space. You can link server rooms, closets and branch locations to the internet and receive critical services to keep your network operating. Use zero-touch provisioning or ZPE Cloud to quickly deploy. You can stay in control even during outages thanks to cellular failover. Nodegrid Manager software, which is vendor-neutral, allows you to manage every device. The Link SR can be deployed to provide routing, security, failover and other services. The Link SR has PoE, which allows for flexible power options. It can also serve as a reliable Wi Fi access point by using dual antennas. It runs on the Nodegrid OS, which is a powerful x86 architecture. This gives it the network function virtualization, management and automation capabilities you rely upon.

CCR1016-12G industrial grade router has a cutting-edge 16 core CPU. Cloud Core Router is the best choice if you need to send millions of packets per second. The unit is equipped with 12 x Gigabit Ethernet ports as well as a color touchscreen LCD. The device is pre-installed with RouterOS, and is ready for use. The device is compatible only with RouterOS v6.46 or newer. Please upgrade if your device came preinstalled with a previous version. The default IP address for Ethernet ports 1 is 192.168.88.1 username: admin. There is no password (or for some models, you can check the sticker for user and wireless passwords).

The NetVanta 6250 Series is designed for converged voice-data services. This includes legacy T1 access and Ethernet delivery. It uses SIP or MGCP to deliver VoIP applications and interoperability with industry-leading soft switch, servers, gateways, and gateways. These devices act as gateways and convert IP signaling from the carrier to traditional TDM analog or digital voice services. This functionality allows the NetVanta 6250 Series of devices to simultaneously provide voice services to traditional telephony equipment and IP phones. All NetVanta 6250 devices have one Gigabit combo port to copper or fiber delivery, four Fast Ethernet port ports for WAN or LAN access, a USB Port for wireless backup or storage, as well as four Fast Ethernet ports. There are also four Fast Ethernet ports for WAN or LAN access, four Fast Ethernet ports to support both WAN and LAN access, a USB port, and four T1 ports that can be used for legacy PBX connections. Additional software upgrades are possible to add SBC functionality, VPN, voice quality monitoring (VQM), and a graphically intuitive interface that displays captured data for mean opinions score (MOS).

The Cisco®, 900 Series Integrated Services Routers are a combination of Internet access, comprehensive security, wireless services, and a single device that is easy-to-use and manage. They can be used as Customer Premises Equipment in small branch offices of enterprises and in managed-service environments for service providers. The Cisco 900 Series ISRs provide integrated security and threat defense to protect networks from known and unknown vulnerabilities and attacks. These powerful routers with fixed configurations offer secure broadband, Metro Ethernet and wireless LTE WAN connectivity. They can be deployed in customer locations by service providers that offer managed Ethernet and wireless LTE WAN services. For full control and visibility of the network configurations at remote sites, you can use web-based tools or Cisco IOS®.

Desktop metal case, 5xEthernet and 5xGigabit Ethernet. PoE out on port 10. 600MHz CPU. 64MB RAM. RouterOS L4. The RB2011 series is a low-cost multiport device. The RB2011 is designed for indoor use and comes in many different configurations with a variety of options. The RB2011iLIN is the most basic model. It has five Gigabit Ethernet ports and five Fast Ethernet ports. It also includes a power jack and PoE support. It is powered by the Atheros 600MHz 74K MIPS next-generation network processor, 64MB RAM, and a Level4 RouterOS licence. Port #10 has a PoE output function. This allows it to power other PoE-capable devices using the same voltage as the unit. The port can handle a maximum load of 500mA. RouterBOARD 2011iL–IN includes a desktop enclosure with power supply. As an option, you can purchase the wall mount kit for your network closet. The operating system is preinstalled on the device and is licensed. The product is ready for use and requires no additional purchase.

1U rackmount, 5xEthernet 5xGigabit Ethernet PoE out on Port 10, 600MHz CPU 64MB RAM RouterOS L4. The RB2011 multi-port device series is low-cost. The RB2011 is designed for indoor use and is available in many cases with a variety of options. RouterOS powers the RB2011, a fully-featured routing operating system that has been improved over fifteen years. RouterOS supports many features, including dynamic routing, hotspot and firewall, MPLS and VPN, advanced quality service, load balancing, bonding, real time configuration and monitoring. The RB2011iLRM features a new feature: a power injector on Ethernet Port 10. This can power other PoE-capable devices using the same voltage as the unit. There are fewer power adapters and cables that you need to worry about. The maximum load on the port can be 500mA. It is powered by an Atheros 600MHz 74K MPIPS network processor. It has 64MB RAM, a Level4 RouterOS licence, and five Gigabit Ethernet ports.

The Peplink UBR Series provides unbreakable connectivity straight out of the box. It is a simple and efficient solution to achieving reliable network connectivity. The UBR Series is designed to increase network speed and reliability. It allows users to connect simultaneously to multiple mobile networks, ensuring maximum performance and minimal downtime. This series features concurrent multi-network connectivity that allows seamless switching between different mobile networks. The UBR Series also incorporates Peplink SpeedFusion technology. This technology offers hot failover capabilities and WAN smoothing capabilities, further increasing the stability and resilience network connections.

This CCR, like the other models in the CCR2004 series also features the Annapurna Labs Alpine v2 processor with 4x 64 bit ARMv8–A Cortex–A57 cores operating at 1,7GHz. Here's the difference. This router is a beast! It can crush all CCR models in single core performance. This is crucial when it comes to heavy operations that are per-connection-based. But that's not all. It also has the highest single-core performance per Watt and the best overall performance per Watt of all CCR devices. It's better for the planet and cheaper for your bills. The new router features 18 wired ports, including 16x Gigabit Ethernet port and two 10G SFP+ boxes. The router also features a full-size USB console port and an RJ-45 console port. It comes in a classic 1U rackmount white case, just like all CCR devices. You will have one less thing to worry with the included dual redundant power supplies. Active cooling is also included to keep things cool.

Provider networks have the ability to scale and adapt to NCS 5700 routers and line cards. Integrated Segment Routing allows for performance-based service offerings. High-density 400G ports allow for long-term network growth. Flexible port configurations available from 10G to 400G, with available 3.6,4.8, 7.2, 9.6 and 9.6 Tbps per line card. Scale with demand Segment Routing allows you to consolidate all services on one infrastructure. This ensures the best client experience. This platform provides long-term growth and protection of investment with backward compatibility and flexible pay-as you-grow models. You can reduce your carbon footprint and power efficiency with a carrier-grade network operation system.

The Total Access 900 Series is optimized for Ethernet and multi-T1 applications. It has four T1 interfaces, one Gigabit and two Fast Ethernet interfaces to face LAN or WAN. There are also several platforms with varying user interfaces (upto 24 FXS ports) that allow for analog voice delivery. You can also add SBC functionality to the devices to allow for up to 100 simultaneous calls. Our Total Access 908 has a single T1 interface and 8 FXS interfaces for analog voice delivery. It also includes an integrated DSX-1 port to PBX connectivity (T1 CAS/PRI) and one Gigabit Ethernet connection for WAN/LAN. Part number 4213908F1. Our Total Access 916 has a single T1 interface and 16 FXS interfaces for analog voice delivery. It also includes an integrated DSX-1 port to PBX connectivity (T1 CAS/PRI) and one Gigabit Ethernet interface to WAN/LAN. Part number 4213916F1. Our Total Access 908 provides a single T1 network interface as well as 24 FXS user interfaces to allow analog voice delivery.

You can spot application problems and gain actionable insights via the internet, cloud and software-as-a-service (SaaS). Built in Cisco vAnalytics, Cisco ThousandEyes solutions and Cisco ThousandEyes. Get industry-leading multilayered security and move to secure access service edges (SASE) with SDWAN for cloud-delivered and on-premises security. Transform your branch using 5G connectivity and other leading-edge wireless network standards. Cisco vManage makes it easy to accelerate your network rollout and streamline your operations visually.

The Nokia 7950 Extensible Route System (XRS), is a next-generation routing system that can help you maintain profitable growth in a highly competitive market. It provides the flexibility, efficiency, scale, and versatility that you need to meet evolving service requirements driven by the cloud and 5G. The 7950 XRS is built on our proven silicon, software and systems integration innovations. It allows you to build a core network with enough headroom for future capacity requirements. You can address all your infrastructure service needs, including IP routing, internet peering and Multiprotocol Label Switching. The 7950XRS has been used by all types of telecom, cable, mobile, utility, as well as private network operators. It is also used by major Web-scale internet exchange providers and operators around the globe as a trusted routing platform.

Our NetVanta 3000 Series fix-port access routers can be used to offer carrier-bundled services and enterprise-class internet access. There are two platforms to choose from: the NetVanta 3140 Series and 3148. The NetVanta 3140 Series provides 100Mbit/s routing performance with a small form factor. The NetVanta 3148 Series can support up to 500Mbit/s routing speed and has an additional GbE interface. Two of these interfaces can be fiber-fed. It also has an 8-port Ethernet switch that can be PoE enabled. The NetVanta 3140 Series has two different forms: one is a desktop chassis made of plastic, and the other is a metal enclosure which can be easily mounted on a rack. Each device supports 100Mbit/s routing and has three routed GbE interfaces as well as one USB interface for 3G/4G/5G Access. As an option, you can add VPN and voice monitoring services.

Radio Access Network (RAN), decisions are important and merit a lot of attention. RAN purchases can account up to 80 percent of mobile operator's Capital Expenditures (CapEx) due to the large number cell sites that are already part of their networks and the new ones that will be added to satisfy the growing bandwidth requirements of subscribers. RAN Operating Expenses (OpEx), account for 60% of TCO, according to estimates. Mobile operators are under immense pressure to improve their efficiency and operational economics, while also meeting the growing demands of legacy wireline, mobile services, and new 5G offerings. The RAN was based on legacy technology until now. Mobile Network Operators (MNOs), however, are looking for new densification strategies due to the increased number of base stations needed to support 4G LTE expansions and new 5G service introductions. The RAN must evolve to become cloud-scaled, software-defined, virtualized.

Your network is under pressure from machine-to-machine (M2M), video, IoT, and gaming applications. The Nokia 7250 IXR is able to meet their stringent requirements and support emerging architectures on the path towards 5G, such centralized and cloud radio, distributed core, leaf spine, multi-access edge computing (MEC), and distributed core. The 7250 IXR–R, IXR–e and IXR–X product families, as well as the 7250 IXR–s platform, are designed for access and aggregation of mobile anyhaul, fixed mobile convergence, and mission critical enterprise applications. They are temperature-hardened platforms that can withstand extreme temperatures and offer advanced timing, security, and quality of service features. The Nokia 7250 IXRX product family, along with the IXR-10 and IXR-6 platforms, provide multi-terabit-scale interconnectivity in data centers and across WANs. They allow service providers, webscale and enterprise networks to meet growing traffic demands for many years to come. They provide exceptional networking performance and reliability.