RB5009UG+S+IN Description
We doubled the usual performance. Based on feedback from the MikroTik User Meetings, we created the perfect home lab router: compact and powerful with multiple power options and efficient cooling. RB5009 has all of this and more! The board has 9 wired ports as well as a full-sized USB 3.0. Seven ports are Gigabit Ethernet while another is 2.5 Gigabit Ethernet. The last port is a 10G SFP+ enclosure. All ports are connected with a Marvell Amethyst family Switch-chip that has a 10 Gbps full duplex line and leads to the Marvell Armada Quadcore ARMv8 1.5 GHz CPU. The switch-chip and CPU are located on the bottom side of the board. The case acts as a heat sink! The boards come with 1GB DDR4 RAM and 1GB NAND storage. This combination of ports, components and processors is almost twice as fast in configurations that have heavy CPU loads than other products in the same form factor.
RB5009UG+S+IN Alternatives
RB2011iLS-IN
Desktop metal case, 5xEthernet and 5xGigabit Ethernet. SFP cage. PoE out on port 10. 600MHz CPU. 64MB RAM. RouterOS L4. RB2011iLS is the first product to include a SFP cage for gigabit-sFP transceivers. It is an ideal solution for FTTH implementations. The RB2011iLS features 11 ports, Gigabit Ethernet ports and five Gigabit Ethernet port that can be connected together to provide a wire-speed fiber–to-copper converter and five additional fast Ethernet ports. The board can be powered via power jack or PoE. SFP transceiver not included. RB2011iLS supports 1.25G SFP transceivers within the SFF committee specifications. RB2011LS does not support passive optical network (PON) hardware support. Tested and recommended for use with MikroTik SFP Modules S-85DLC05D and S-31DLC20D (not include). It is powered by the Atheros Next Generation 600MHz 74K MIPS network processor, has 64MB RAM, and a Level4 RouterOS licence.
Learn more
FiberBox Plus
The Fiber Box Plus can be viewed in two ways. It's a major upgrade to our FiberBox devices. This version has a new ARM CPU, more RAM and four 10-Gigabit SFP+ port. You can get reliable and fast connectivity without breaking the bank. Without the limitations of Ethernet's distance. A Gigabit Ethernet port is available for management and PoE-in powering. You also get a 2-pin terminal as well as a standard DC Jack, giving you 3 power options. FiberBox Plus can accept input voltages from 24-57V. It is also extremely efficient, with a maximum power consumption of 7W (without attachments). The FiberBox Plus is a budget version for the incredible netFiber 9. If you don't require the additional Gigabit SFP ports, you can save a lot. It also features the same Marvell 98DX226S switch chip, which ensures that the performance is unbeatable!
Learn more
CCR2216-1G-12XS-2XQ
Our new flagship product, the Cloud Core Router 2216, is now available! Its powerful 16-core CPU can compete with the powerful 72-core Tile CPU from our previous flagship, the CCR1072. The Marvell Prestera Aldrin2 switch chip really takes it to the next level, with L3 Hardware offloading! The previous CCR2116 had a switch-chip that had four 10G CPU connection lines. This time, there are four 25G lines! There are two QSFP28 cages that provide 100 Gigabit connectivity at blazing speeds, twelve SFP28 cages that allow for 25 Gigabit networking and a Gigabit Ethernet connection. The device has 16 GB RAM, decent NAND storage, two M.2 SATA slot slots, and a Gigabit Ethernet port. There are four hot-swappable fans and dual-redundant hot–swap power sources. These PSUs may look familiar if your CCR1072 has been used before. You can continue to use your existing hot-swap power supply and SFP modules.
Learn more
RB3011UiAS-RM
1U rackmount. 10xGigabit Ethernet. SFP. USB 3.0. LCD. PoE out on port 10. 2x1.4GHz CPU. 1GB RAM. RouterOS L5. The RB3011 multi-port device is our first to use an ARM architecture CPU. This allows for greater performance than ever. The RB3011 features ten Gigabit ports, divided into two switch groups, an SP cage, and a SuperSpeed full size USB 3.0 port. This port can be used to add storage or an external 3G/4G modem. The RB3011UiAS RM Unit includes a 1U rackmount enclosure, a touchscreen panel, and PoE output functionality on last Ethernet port. The operating system has been preinstalled and is licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years beginning from the date of purchase.
Learn more
Pricing
Pricing Starts At:
$219 one-time payment
Integrations
Company Details
Company:
MikroTik
Year Founded:
2009
Headquarters:
United States
Website:
mikrotik.com/product/rb5009ug_s_in
Media
Recommended Products
Our Free Plans just got better! | Auth0 by Okta
You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your secuirty. Auth0 now, thank yourself later.
Product Details
Type of Training
Documentation
Webinars
In Person
Videos
Customer Support
Online
RB5009UG+S+IN Features and Options
RB5009UG+S+IN User Reviews
Write a Review- Previous
- Next