Alternatives to RB2011UiAS-RM

1U rackmount, 5xEthernet 5xGigabit Ethernet PoE out on Port 10, 600MHz CPU 64MB RAM RouterOS L4. The RB2011 multi-port device series is low-cost. The RB2011 is designed for indoor use and is available in many cases with a variety of options. RouterOS powers the RB2011, a fully-featured routing operating system that has been improved over fifteen years. RouterOS supports many features, including dynamic routing, hotspot and firewall, MPLS and VPN, advanced quality service, load balancing, bonding, real time configuration and monitoring. The RB2011iLRM features a new feature: a power injector on Ethernet Port 10. This can power other PoE-capable devices using the same voltage as the unit. There are fewer power adapters and cables that you need to worry about. The maximum load on the port can be 500mA. It is powered by an Atheros 600MHz 74K MPIPS network processor. It has 64MB RAM, a Level4 RouterOS licence, and five Gigabit Ethernet ports.

Desktop metal case, 5xEthernet and 5xGigabit Ethernet. USB, LCD. PoE out on port 10. 600MHz CPU. 128MB RAM. RouterOS L5. The RB2011 multi-port device is a low-cost, affordable series. The RB2011 is designed for indoor use and is available in many cases with a variety of options. RouterOS powers the RB2011, a fully-featured routing operating system that has been improved over fifteen years. RouterOS supports many features, including dynamic routing, hotspot and firewall, MPLS VPN, advanced quality service, load balancing, bonding, real time configuration and monitoring. RouterBOARD 2011UiAS in, compared to RB2011L, has five Gigabit LAN port and five Fast Ethernet LAN port ports. It also has RJ45 serial port and USB port. There is also more RAM (128MB instead 64MB). It also has RouterOS L5 license instead of L4, and a touchscreen LCD for configuration. A SFP cage is also available.

Desktop metal case, 5xEthernet and 5xGigabit Ethernet. SFP cage. PoE out on port 10. 600MHz CPU. 64MB RAM. RouterOS L4. RB2011iLS is the first product to include a SFP cage for gigabit-sFP transceivers. It is an ideal solution for FTTH implementations. The RB2011iLS features 11 ports, Gigabit Ethernet ports and five Gigabit Ethernet port that can be connected together to provide a wire-speed fiber–to-copper converter and five additional fast Ethernet ports. The board can be powered via power jack or PoE. SFP transceiver not included. RB2011iLS supports 1.25G SFP transceivers within the SFF committee specifications. RB2011LS does not support passive optical network (PON) hardware support. Tested and recommended for use with MikroTik SFP Modules S-85DLC05D and S-31DLC20D (not include). It is powered by the Atheros Next Generation 600MHz 74K MIPS network processor, has 64MB RAM, and a Level4 RouterOS licence.

Desktop metal case, 5xEthernet and 5xGigabit Ethernet. PoE out on port 10. 600MHz CPU. 64MB RAM. RouterOS L4. The RB2011 series is a low-cost multiport device. The RB2011 is designed for indoor use and comes in many different configurations with a variety of options. The RB2011iLIN is the most basic model. It has five Gigabit Ethernet ports and five Fast Ethernet ports. It also includes a power jack and PoE support. It is powered by the Atheros 600MHz 74K MIPS next-generation network processor, 64MB RAM, and a Level4 RouterOS licence. Port #10 has a PoE output function. This allows it to power other PoE-capable devices using the same voltage as the unit. The port can handle a maximum load of 500mA. RouterBOARD 2011iL–IN includes a desktop enclosure with power supply. As an option, you can purchase the wall mount kit for your network closet. The operating system is preinstalled on the device and is licensed. The product is ready for use and requires no additional purchase.

Five Gigabit Ethernet routers with four PoE-out ports, a SFP cage and an outdoor enclosure. The PowerBox Pro outdoor five-gigabit Ethernet router has PoE output on four ports. The device can be mounted on a tower or other outdoor locations thanks to its weatherproof outdoor case. It supports passive PoE input as well as passive or 802.3af/at PoE output. Other PoE-capable devices can be powered by the Ethernet ports 2-5 with the same voltage as the unit. There are fewer power adapters and cables that you need to worry about. It can power 802.3at or af mode compatible devices when 48-57 input voltage has been used. The device also has an SFP port that allows for optical fiber connectivity. It is small and easy to use. However, it has a powerful 800MHz CPU that can handle all advanced configurations supported by RouterOS. The operating system is preinstalled on the device and licensed. The product is ready for use and requires no additional purchase.

1U rackmount. 10xGigabit Ethernet. SFP. USB 3.0. LCD. PoE out on port 10. 2x1.4GHz CPU. 1GB RAM. RouterOS L5. The RB3011 multi-port device is our first to use an ARM architecture CPU. This allows for greater performance than ever. The RB3011 features ten Gigabit ports, divided into two switch groups, an SP cage, and a SuperSpeed full size USB 3.0 port. This port can be used to add storage or an external 3G/4G modem. The RB3011UiAS RM Unit includes a 1U rackmount enclosure, a touchscreen panel, and PoE output functionality on last Ethernet port. The operating system has been preinstalled and is licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years beginning from the date of purchase.

5x Gigabit Ethernet with Dual Core 880MHz CPU and 256MB RAM. USB, microSD, RouterOSL4. hEX is a five port Gigabit Ethernet router that can be used in locations without wireless connectivity. The device features a full-size USB port. The hEX has been updated with several performance improvements. It is small, lightweight, and easy to use. However, it has a dual-core 880MHz CPU with 256MB RAM and is capable of running all advanced configurations supported by RouterOS. IPsec hardware encryption (470Mbps) and The Dude package are supported. The microSD slot on it allows for faster file storage and Dude. The operating system is preinstalled on the device and licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years beginning from the date of purchase.

You can save space by installing a real CCR2004.. inside your server! This unique product combines a 2x25 Gigabit PCIe Ethernet adapter and the impressive capabilities of a full-fledged router. The default configuration of the PCIe interface is to display four virtual Ethernet interfaces. Two interfaces are available in passthrough mode to the 25G SFP28 boxes. The remaining two virtual Ethernet-PCIe connections are connected to the Gigabit Ethernet port for management. Since we have fully functional RouterOS, the user can freely configure all interfaces and settings. A new Passthrough mode was created to allow this CCR device as an NIC. A FastForward FastPath mode which can also pass hardware link statuses. This NIC can reach wire speed (100Gbps), with Jumbo frames. This card ensures that the CCR network card is not the bottleneck in most server setups.

CCR1016-12G industrial grade router has a cutting-edge 16 core CPU. Cloud Core Router is the best choice if you need to send millions of packets per second. The unit is equipped with 12 x Gigabit Ethernet ports as well as a color touchscreen LCD. The device is pre-installed with RouterOS, and is ready for use. The device is compatible only with RouterOS v6.46 or newer. Please upgrade if your device came preinstalled with a previous version. The default IP address for Ethernet ports 1 is 192.168.88.1 username: admin. There is no password (or for some models, you can check the sticker for user and wireless passwords).

This CCR, like the other models in the CCR2004 series also features the Annapurna Labs Alpine v2 processor with 4x 64 bit ARMv8–A Cortex–A57 cores operating at 1,7GHz. Here's the difference. This router is a beast! It can crush all CCR models in single core performance. This is crucial when it comes to heavy operations that are per-connection-based. But that's not all. It also has the highest single-core performance per Watt and the best overall performance per Watt of all CCR devices. It's better for the planet and cheaper for your bills. The new router features 18 wired ports, including 16x Gigabit Ethernet port and two 10G SFP+ boxes. The router also features a full-size USB console port and an RJ-45 console port. It comes in a classic 1U rackmount white case, just like all CCR devices. You will have one less thing to worry with the included dual redundant power supplies. Active cooling is also included to keep things cool.

This CCR, like the other models in the CCR2004 series also features the Amazon Annapurna Labs Alpine v2 processor with 4x 64 bit ARMv8–A Cortex–A57 cores. The router can run at 1.2 GHz while the CPU is still running at 1.2 GHz. However, it can be 3x faster than the previous generation CCR's. This is the silent powerhouse. You can enjoy all the power and tranquility of a CCR in peace. You can get rid of the hum and buzz in your studio, homelab, server room, or office without sacrificing performance. The new router features 18 wired ports, including 16x Gigabit Ethernet port and two 10G SFP+ boxes. The router also features a RJ45 console port on its front panel. Each group of 8 Gigabit Ethernet ports are connected to a separate Marvell Amethyst family switching-chip. Each switch chip has a 10Gbps full-duplex line connecting to the CPU. The same applies to each SFP+ cage, which has a separate 10 Gbps full duplex line. The boards come with 4GB DDR4 RAM and 128MB NAND storage.

Cisco ASR 1000 Series Aggregation Service Routers offer a Software Defined WAN platform. They aggregate multiple WAN connections and network service including traffic management and encryption, and forward them across WAN connections at speeds of 2.5 to 200 Gbps. The industry-leading high-availability design of the routers includes both hardware and software redundancy. The Cisco ASR 1002-HX Router, and the Cisco ASR 1001–HX Router are the latest additions to Cisco's ASR 1000 Series. Both routers can support speeds up to 100 Gbps in 2-Rack-Unit (2RU), and 60 Gbps for 1-Rack–Unit (1RU). The ASR 1002-HX includes 8 10 Gigabit Ethernet ports (GE) and 8 1 GE ports. It also has the Ethernet Port Adapter slot (EPA) for expansion. The ASR 1001HX has 4 10 GE ports and 8 1 GE port, as well as 4 configurable 10 GE and 1 GE ports. The Cisco ASR 1000 Series Route Processor 3 adds to the latest additions to the modular control plane engines of the Cisco ASR 1000 Series.

This journey is completed by Cisco®8000 Series routers. They provide provider-class routing functionality with unmatched density, power, and performance. The Cisco 8000 Series can be deployed in a wide range of routing roles, all supported by a single ASIC architecture. This simplifies qualification, deployment and operations. The Cisco 8000 Series combines IOS XR®, Cisco Silicon One™ software and a set clean sheet chassis to provide a breakthrough in high performance routers. The 8000 Series includes a wide range of feature-rich, high-scalable, deep-buffered on-chip High Bandwidth Memory(HBM) and 400 Gigabit Ethernet(GbE), optimized routers that can handle speeds ranging from 10.8 Tbps to 25.6Tbps in a 1RU footprint. It is also available as a rack-mountable modular system that can forward 518.4 Tbps full-duplex line rate forwarding.

5xEthernet, PoE output for four ports. USB, 650MHz CPU. 64MB RAM. RouterOS L4. hEX PoE light is a small five port Ethernet router. It comes in a plastic case and has a USB 2.0 port. Ports 2-5 are capable of powering other PoE-capable devices using the same voltage that was applied to the unit. There are fewer power adapters or cables to worry about. Maximum current per port is 1A, Ethernet ports are protected. It is small and easy to use. Its compact design and clean appearance will make it a perfect fit for any SOHO environment. The operating system is preinstalled on the device and licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years from the date of purchase. External devices can be powered by PoE using the Ethernet ports. This is convenient because you don't need additional PoE injectors for other devices.

The Total Access 900e Series is optimized for Ethernet or multiT1 converged voice, data, and offers robust IP router and firewall functionality. It has four T1 interfaces, one Gigabit and two fast Ethernet interfaces to face LAN or WAN, as well as several devices with varying user interfaces (up 24 FXS ports) that allow for analog voice delivery. These devices can also be configured to add SBC functionality, allowing for up 100 simultaneous calls. Total Access 908e has 8 FXS ports via Amphenol connection for analog vocal delivery, four T1/FT1 port ports, and three Ethernet interfaces (one Gigabit, two Fast) for WAN and LAN access. Part number 4243908F1. Our Total Access 916e has 16 FXS ports via Amphenol connection for analog vocal delivery, four T1/FT1 port ports, and three Ethernet interfaces (one Gigabit, two Fast) for WAN and LAN access. Part number 4243916F1. Total Access 916e has 16 FXS ports and an Amphenol connection to provide analog voice delivery.

Belden's routers are ideal for industrial environments where reliability, flexibility, and secure systems are essential. The routers comply with IEC 61885 and are suitable for large substation installations, or similar applications that require hardness, performance, security and quality of service. Advanced routing and security, combined capabilities L3 switching with WAN routing. Expandable and modular: All gigabit ports have configurable slots that offer a range of LAN options, from 4-port to 10-port GbE LAN options. Legacy infrastructure interfacing, support of legacy T1E1 or DDS interfaces and non-Ethernet communications

The new RB1100AHx4 dude edition features an Annapurna Alpine Al21400 CPU with four Cortex A15 Cores clocked at 1.4GHz each for a maximum throughput up to 7.5Gbps. The device supports IPsec hardware acceleration, and is faster than any other RouterBOARD device (upto 2.2Gbps with the AES128). The unit comes with a 1U rackmount case, 13x Gigabit Ethernet ports and RS232 serial ports. It also has dual redundant power supplies (with -48vDC telecom power and 802.3at/af) The RB1100AHx4 Dude Edition features four high speed storage connectors, two SATA and two M.2, which can be used to create a Dude database, proxy cache, or any other storage-intensive feature. It comes with a 60GB M.2 hard drive.

The RB4011 series - incredibly powerful routers with ten Gigabit ports and SFP+ 10Gbps interface, IPsec hardware acceleration and IPsec hardware acceleration at a great price! The RB4011 is powered by a quad-core Cortex A15 CPU. This is the same processor as our carrier grade RB1100AHx4 unit. The unit comes with 1GB RAM and can provide PoE output on Port #10. It also has a professional-looking solid metal enclosure in matte dark. The RB4011iGS+RM Ethernet model includes two rackmount ears to securely attach the unit to a standard 1U rack space.

5x Ethernet, Small case, 850MHz CPU and 64MB RAM. RouterOS L4 is the most affordable MPLS router. The hEX-lite is a small, five-port Ethernet router with a nice case. The RB750r2 (hEX light) is a small, five-port Ethernet router that costs less than the RouterOS license. It is the best choice for managing your wired home network. It's small, compact, attractive, and easy-to-use, making it one of the most affordable MPLS-capable routers on the market. RB750r2 is a combination of price and features. Its compact design and clean appearance will make it a perfect fit for any SOHO environment. The box contains the hEX light in a plastic case with its power supply. The operating system has been preinstalled and is licensed. The product is ready for use and requires no additional purchase. The product includes software updates for the lifetime of the device or a minimum of five years beginning from the date of purchase.

We doubled the usual performance. Based on feedback from the MikroTik User Meetings, we created the perfect home lab router: compact and powerful with multiple power options and efficient cooling. RB5009 has all of this and more! The board has 9 wired ports as well as a full-sized USB 3.0. Seven ports are Gigabit Ethernet while another is 2.5 Gigabit Ethernet. The last port is a 10G SFP+ enclosure. All ports are connected with a Marvell Amethyst family Switch-chip that has a 10 Gbps full duplex line and leads to the Marvell Armada Quadcore ARMv8 1.5 GHz CPU. The switch-chip and CPU are located on the bottom side of the board. The case acts as a heat sink! The boards come with 1GB DDR4 RAM and 1GB NAND storage. This combination of ports, components and processors is almost twice as fast in configurations that have heavy CPU loads than other products in the same form factor.

Our NetVanta 4000 Series is perfect for carrier bundled services up to 1Gbit/s and enterprise-class internet access for high-speed, secure corporate connectivity. There are several variations that add power over Ethernet (PoE), VPN, and/or voice monitoring services to the switch and VPN built-ins. All NetVanta 4000s are capable of providing eSBC functionality. This allows customers to have a truly converged platform. They can also grow via software to support as many calls as you need, supporting up 1000 calls. Our NetVanta 4148 has four routed, autosensing Gigabit interfaces. Two of these can be fiber-fed and one 8-port Gigabit Ethernet switch. These Gigabit interfaces are ideal for Ethernet redundancy and failover with instant failover if one link goes down. They can be LAN-facing or WAN-facing. Part number 17004148F1. Our NetVanta 4148 has an enhanced feature pack upgrade that allows you to support 500 VPN tunnels.

The CCR1072, our flagship router, is powered by a Tilera 72-core CPU. Each core is clocked to 1GHz. To fully utilize this power, the CCR1072 has eight independently connected 10G SP+ ports and one Ethernet port for management. The unit includes 16GB of installed RouterOSL6, touchscreen color LCD, two removable power supplies for redundancy, smart cards slot, regular size USB and 2x M.2 storage slots. CCR1072 can process over 120 million packets per second thanks to its unique 72-core processor and the ports that are directly connected with the CPU.

The fastest router has just gotten even faster - the CCR1036-8G-2S+ has two SFP+ ports to support 10G interface support (SFP+ module sold separately). It has the same 36 core Tilera CPU performance as the CCR1036 model and offers the same performance. The device is housed in a 1U rackmount box, with two SFP+ ports, eight Gigabit Ethernet ports, and a serial console port. CCR1036-8G-2S+ now has 4GB RAM, an onboard M.2PCIe 4x slot, full-size USB slot, and dual power supply for redundancy.

Our NetVanta 3000 Series fix-port access routers can be used to offer carrier-bundled services and enterprise-class internet access. There are two platforms to choose from: the NetVanta 3140 Series and 3148. The NetVanta 3140 Series provides 100Mbit/s routing performance with a small form factor. The NetVanta 3148 Series can support up to 500Mbit/s routing speed and has an additional GbE interface. Two of these interfaces can be fiber-fed. It also has an 8-port Ethernet switch that can be PoE enabled. The NetVanta 3140 Series has two different forms: one is a desktop chassis made of plastic, and the other is a metal enclosure which can be easily mounted on a rack. Each device supports 100Mbit/s routing and has three routed GbE interfaces as well as one USB interface for 3G/4G/5G Access. As an option, you can add VPN and voice monitoring services.

Introducing RB1100AHx4, 13x Gigabit Internet ports Router. It is powered by Annapurna Alpine AL21400 CPU, with four Cortex-A15 cores. This allows for a maximum throughput up to 7.5Gbit. The device supports IPsec hardware acceleration, up to 2.2Gbps with the AES128. The unit comes with a 1U rackmount case, RS232 serial ports and dual redundant power supplies (with –48v DC telecom power support and 802.3at/af). There are two models available. The RB1100AHx4 Dude Edition has several high-speed storage connectors (two SATA, two M.2) that can be used to access a Dude database, proxy cache, or any other storage-intensive feature. The Dude edition comes with a 60 GB M.2 hard drive already installed.

CCR1016 industrial grade router features a cutting-edge 16 core Tilera CPU. Cloud Core Router is the best choice if you need to send millions of packets per second. This model comes with twelve SFP ports and one SFP+ connector for 10G connectivity. It comes in a 1U rackmount box and has a serial console port as well as a touchscreen LCD, USB port and a touchscreen LCD. The CCR1016-12S-1S+ includes redundant power supplies and one RJ45 SP 10/100/1000M copper modules.

Our new flagship product, the Cloud Core Router 2216, is now available! Its powerful 16-core CPU can compete with the powerful 72-core Tile CPU from our previous flagship, the CCR1072. The Marvell Prestera Aldrin2 switch chip really takes it to the next level, with L3 Hardware offloading! The previous CCR2116 had a switch-chip that had four 10G CPU connection lines. This time, there are four 25G lines! There are two QSFP28 cages that provide 100 Gigabit connectivity at blazing speeds, twelve SFP28 cages that allow for 25 Gigabit networking and a Gigabit Ethernet connection. The device has 16 GB RAM, decent NAND storage, two M.2 SATA slot slots, and a Gigabit Ethernet port. There are four hot-swappable fans and dual-redundant hot–swap power sources. These PSUs may look familiar if your CCR1072 has been used before. You can continue to use your existing hot-swap power supply and SFP modules.

AirLink routers can be deployed straight out of the box without any programming required and provide the intelligence to keep connected. Customers who require the best for mission-critical applications in harsh indoor, vehicle, and outdoor environments will find the Performance Series routers ideal. They offer the best combination of secure, Wi-Fi and cellular LTE performance in ruggedized form factors. The industry's best-performing 5G router, specifically designed for vehicles. Future-proof, cartridge-based design with additional functions and features. 5 ethernet ports, dual 4X4 MIMO Wi–Fi 6. AirLink Premium allows remote device management and mobility-focused reporting. Fixed applications only. Single-radio 5G router. The cartridge-based design allows you to easily expand to dual-radios or add more functionality. 4 ethernet ports, 5x4 MIMO Wi–Fi 6. Remote device management via AirLink Complete

The HPE MSR3000 Router Series features a modular design that provides unmatched application services for large branch offices. These routers provide Gigabit switching, an enhanced PCI bus, and ship with the Comware v7OS. They offer a full-featured resilient routing platform that includes IPv6 MPLS and up to 13 Mpps forwarding. They also offer 14.3 Gb/s IPSec VPN encrypted throughput to ensure high concurrent service performance. The MSR3000 Router Series supports a wide variety of virtualized applications through the Open Application Platform module. Its distributed architecture and high reliability increase the resilience of medium-sized branches. The MSR3000 series offers a flexible, agile network infrastructure that allows you to quickly adapt to changing business needs while simultaneously delivering integrated concurrent services from a single, easy to manage platform.

The Total Access 900 Series is optimized for Ethernet and multi-T1 applications. It has four T1 interfaces, one Gigabit and two Fast Ethernet interfaces to face LAN or WAN. There are also several platforms with varying user interfaces (upto 24 FXS ports) that allow for analog voice delivery. You can also add SBC functionality to the devices to allow for up to 100 simultaneous calls. Our Total Access 908 has a single T1 interface and 8 FXS interfaces for analog voice delivery. It also includes an integrated DSX-1 port to PBX connectivity (T1 CAS/PRI) and one Gigabit Ethernet connection for WAN/LAN. Part number 4213908F1. Our Total Access 916 has a single T1 interface and 16 FXS interfaces for analog voice delivery. It also includes an integrated DSX-1 port to PBX connectivity (T1 CAS/PRI) and one Gigabit Ethernet interface to WAN/LAN. Part number 4213916F1. Our Total Access 908 provides a single T1 network interface as well as 24 FXS user interfaces to allow analog voice delivery.

The HPE MSR95x Router Series delivers small-branch routing at high performance in a single cost-optimized form factor. With integrated routing, switching and wireless, security, voice, and voice, the HPE MSR95x Router Series can boost service delivery and simplify the management of the corporate-wide network (WAN). This series is easy to deploy with Zero Touch Provisioning and WAN options that include LTE connectivity. The MSR95x is compatible with Comware v7 and fiber connections. It also offers advanced services such as IPS, high encryption, and other performance features that are not available on modular routers. High-performance, converged fiber routing, switching and security. Integrated 1/10GbE and WAN, fiber (SFP), All in one: Integrated 4G LTE, 3G, and IEEE 802.11b/g/n WiFi. Embedded encryption, stateful firewalls, NAT, and ADVPN security features. Comware OS Zero-Touch Solution, Inified Comware, and Single-Pane-of Glass management.

The HPE MSR4000 Router Series delivers high-performance large branch routing up to 36 Mpps in an economically-optimized form factor. You can increase your service delivery and simplify the management of your corporate network by integrating routing, switching security, VPN, SIP, and other licensing. The MSR4000 Router Series has an Open Application Platform module that allows you to create virtualized applications. The large branches can be resilient due to its modular, distributed architecture and high reliability. It provides security enhancements with a built-in IPS subscription and an optional HPE IPS filter subscription. There is also a zone-based, stateful firewall. OpenFlow allows for Software-defined Networking (SDN). WAN optimization and Intelligent Resilient fabric (IRF). Ethernet Virtual Interconnect (EVI), VXLAN and VPLS. Fiber LAN switching and high density E1/T1 modules. The HPE MSR4000 Router Series simplifies network management through integrated routing, switching and security.

The Cisco®, NCS 560 Series Router offers a cost-effective modular solution that is based on a protocol independent fabric architecture. As part of the Cisco Evolved Programmable Network architecture, the Cisco NCS 560 Series Router is capable of providing unbounded scale for Carrier Ethernet business services over redundant and protected packet network technologies (IP/MPLS/MPLS-TE. SR, MPLS-TE. SR-TE. TI-LFA). Customers will enjoy a high level of flexibility and value with the Cisco NCS560 Series Router Ethernet interface module. All Ethernet interface modules share the same core that supports time stamping of the module for Y.1731 Operations, Administration, and Maintenance delay measurement functions. This allows for precise results for both one-way and double-way delay measurement. The modules also support time stamping functions for IEEE 1588-2008 protocols.

The RB5009 version has all the bells & whistles of the previous model, including Gigabit Ethernet and 2.5 Gigabit Ethernet. There is also a 10 Gigabit SFP+ box for fiber connectivity. It has the speed and power as well as the durability. This time, we added PoE in & PoE out to all eight Ethernet ports. You get 10 different ways to power your device, thanks to the DC jack and the 2-pin connector. Dual redundant power supplies will usually increase your uninterrupted uptime. The RB5009UPr+S+IN is a step beyond that! All power options can support a wide voltage range from 24 to 57 V. However you cannot mix the voltages. If you use PoE-out to power another device, the board will choose to power them from the source with the highest voltage (DC Jack or 2-pin connector).

The best home AP just got better Chateau LTE18 version 6 Chateau LTE18 is now available with 2.5 Gigabit Ethernet. Chateau LTE18 Ax can offer unprecedented speed thanks to Wave 2 support and the Generation6 802.11ax wireless standards. Comparing it to the previous generation, we can see up to 40% faster in the 5GHz spectrum and up to 90% more in the 2.4GHz spectrum. Massive improvements have been made to the wireless radios and antennas. Chateau LTE18 ax supports MIMO4x4 on LTE. For exceptional coverage throughout your entire home, there are 4 LTE antennas built in and 2 external network antennas. The ports had to be able to handle such high speeds. We retained four Gigabit Ethernet ports, and added a 2.5 Gigabit Ethernet connection to the top. The USB can also be useful for storage purposes. Heavy operations are made possible by the modern quad-core CPU at 1.8GHz and solid GB RAM.

Mobile internet has never been more accessible. Chateau 5G version 6 Chateau 5G is now faster wireless, has a better CPU, and offers 2.5 Gigabit Ethernet. The new Chateau looks very similar to the older models. Chateau 5G ax is capable of delivering unprecedented speed thanks to Wave 2 support and the Generation6 802.11ax wireless standards. Comparing it to the previous generation, we can see up to 40% faster in the 5GHz spectrum and up to 90% more in the 2.4GHz spectrum. Massive improvements have been made to the wireless radios and antennas. Chateau 5G ax supports MIMO4x4 on 5G or LTE. There are 6 LTE/5G built-in antennas. One pair of external antennas gives you better wireless network coverage in larger homes and the other provides enhanced LTE/5G connectivity. The ports had to be able to cope with such high speeds. We retained four Gigabit Ethernet ports, and added a 2.5 Gigabit Ethernet connection to the top. The USB can be very useful for storage purposes.

The Fiber Box Plus can be viewed in two ways. It's a major upgrade to our FiberBox devices. This version has a new ARM CPU, more RAM and four 10-Gigabit SFP+ port. You can get reliable and fast connectivity without breaking the bank. Without the limitations of Ethernet's distance. A Gigabit Ethernet port is available for management and PoE-in powering. You also get a 2-pin terminal as well as a standard DC Jack, giving you 3 power options. FiberBox Plus can accept input voltages from 24-57V. It is also extremely efficient, with a maximum power consumption of 7W (without attachments). The FiberBox Plus is a budget version for the incredible netFiber 9. If you don't require the additional Gigabit SFP ports, you can save a lot. It also features the same Marvell 98DX226S switch chip, which ensures that the performance is unbeatable!

The HUAWEI WiFi AX2 is equipped with 5GHz and 2.5GHz bands. They operate simultaneously and switch devices between the 5GHz and 2.4GHz bands to ensure a stable connection. 5 GHz is best for streaming and streaming at high speeds, while 2.4 GHz offers greater coverage. Multiple routers can be linked together under one Wi-Fi name. This allows you to link your HUAWEI WiFiAX2 with other HUAWEI routers in your home. Automatic switching is possible as you move about. The HUAWEI WiFi AX2 has three Gigabit Ethernet ports. Each port supports WAN/LAN automatic-adaptation4, which saves you the effort of identifying them. This makes it easy to install broadband. AX2 allows you to check Wi-Fi coverage for your home, see the network status, and solve network problems by following the suggestions. You can manage your router from your smartphone in just a few clicks.

We wanted to maximize the power of 10G networking with a modern CPU. CCR2116-12G-4S+ lets you forget about CPU limitations in any setup. This router, like its older brother, the CCR2004 is powered by the Amazon Annapurna Labs Alpine processor. This CCR eats 16 cores at 2 GHz. We see at most a 15% improvement in single-core performance. This is especially important when it comes to heavy operations that are per-connection processed. Like queues, for example. CCR2116-12G-4S+ is a new standard in single-core performance across the entire CCR product line! It also supports Layer 3 Hardware Offloading! You will need the right connectivity to harness this power. There are four 10G SFP+ ports. They also have a full-duplex line that is connected to the Marvell Aldrin family switch chips. We also have Gigabit Ethernet ports. Twelve of them are running through Marvel's chip.

The NetVanta 6250 Series is designed for converged voice-data services. This includes legacy T1 access and Ethernet delivery. It uses SIP or MGCP to deliver VoIP applications and interoperability with industry-leading soft switch, servers, gateways, and gateways. These devices act as gateways and convert IP signaling from the carrier to traditional TDM analog or digital voice services. This functionality allows the NetVanta 6250 Series of devices to simultaneously provide voice services to traditional telephony equipment and IP phones. All NetVanta 6250 devices have one Gigabit combo port to copper or fiber delivery, four Fast Ethernet port ports for WAN or LAN access, a USB Port for wireless backup or storage, as well as four Fast Ethernet ports. There are also four Fast Ethernet ports for WAN or LAN access, four Fast Ethernet ports to support both WAN and LAN access, a USB port, and four T1 ports that can be used for legacy PBX connections. Additional software upgrades are possible to add SBC functionality, VPN, voice quality monitoring (VQM), and a graphically intuitive interface that displays captured data for mean opinions score (MOS).

The HPE HSR6800 Series of multiservice routers is a family that provides high-performance, multiservice routing for data center interconnection, enterprise core, campus edge and high-speed, WAN aggregation services. It runs the Comware operating software and has a multi-core, distributed service processing hardware architecture capable of scaling up to 420 Mpps forwarding as well as up to 2Tbps switching capacity. The router offers robust routing, multicast and Multiprotocol Label Switching, (MPLS), IPv6, security and quality of service, as well as carrier-level high availability features and high-density interface options (10GbE or 1GbE). The fully modular Comware v7 network operating systems offers enhanced performance and system availability. Feature enhancements include ADVPN, EVI, EAA and ISSU. FIP-240 doubles the FIP210 forwarding performance and can be used to open up to 4 HIM/MIM slots. Line cards provide 1GbE combo/10bGE ports and enhanced IPsec performance. RT-HIM-2EXP doubles the density of HIM 10GbE ports and supports SFP+.

The Cisco®, 900 Series Integrated Services Routers are a combination of Internet access, comprehensive security, wireless services, and a single device that is easy-to-use and manage. They can be used as Customer Premises Equipment in small branch offices of enterprises and in managed-service environments for service providers. The Cisco 900 Series ISRs provide integrated security and threat defense to protect networks from known and unknown vulnerabilities and attacks. These powerful routers with fixed configurations offer secure broadband, Metro Ethernet and wireless LTE WAN connectivity. They can be deployed in customer locations by service providers that offer managed Ethernet and wireless LTE WAN services. For full control and visibility of the network configurations at remote sites, you can use web-based tools or Cisco IOS®.

The Cisco®, ASR 920 Series Aggregation Services Router is a full-featured converged accessibility platform that allows for cost-effective delivery and management of wireline and wireless services. These temperature-hardened, high-throughput, small form factor, low-power-consumption routers are optimized for mobile backhaul and business applications. The Cisco ASR 920 Router offers a comprehensive and scalable feature list of Layer 2 VPN (L2VPN), and Layer 3 VPN(L3VPN), all in a compact package. It allows service providers to deploy MPLS-based VPN services within the access layer. The Cisco ASR920 Series features key Carrier Ethernet features. You can use them to obtain premium services with enhanced service level agreements (SLAs) through the Cisco ASR920 Series. The Cisco ASR 920 Series is flexible and cost-effective thanks to an optional "pay-as you grow" feature and a service activation model.

Edge networks provide low-latency services to billions of devices. You need feature-rich routers that can scale with bandwidth demand. The ASR 9000 series is your edge router device that can support the application performance required for 5G service. Secure Boot, Cisco Trust Anchor, as well as anti-counterfeiting measures, provide enhanced security. Secure Development Lifecycle to ensure manufactured honesty. ASR 9000 offers investment protection with continual software and hardware innovation. Optimized custom ASIC to balance performance with a 100x increase in capacity and a 96% reduction in power per Gbps. Real-time telemetry, segment routing and Ethernet Virtual Private Networks, (EVPNs) are all possible.

The core of the world's most powerful core and peering architectures are the PTX Series routers. They are powered by the latest generation Juniper Express family ASICs and cloud-optimized for smooth 400G migrations. They provide the flexibility, scale, and investment protection required to meet today's market demands. The routers provide native 400G inline MACSsec, flexible filtering, as well as a reliable network operating platform that has been powering high-performance solutions for generations. PTX routing can help you discover the 100G and 400G mass-scale cloud solutions. The PTX10008, PTX10008, PTX10016 Packet Transport Routers are modular solutions that address the huge bandwidth demands placed on networks. They provide high port density, native 400GbE MACsec and the latest-generation ASIC investment for the most demanding WANs and data centers.

Provider networks have the ability to scale and adapt to NCS 5700 routers and line cards. Integrated Segment Routing allows for performance-based service offerings. High-density 400G ports allow for long-term network growth. Flexible port configurations available from 10G to 400G, with available 3.6,4.8, 7.2, 9.6 and 9.6 Tbps per line card. Scale with demand Segment Routing allows you to consolidate all services on one infrastructure. This ensures the best client experience. This platform provides long-term growth and protection of investment with backward compatibility and flexible pay-as you-grow models. You can reduce your carbon footprint and power efficiency with a carrier-grade network operation system.

The 7210 SAS product range provides the flexibility, service richness, and reliability required to extend segment routing, IP/MPLS and Carrier Ethernet to your network access points. It is widely used in enterprise, government, and industry applications. Your network can be prepared for future growth by integrating high-density GE or 10GE interfaces, 100 GE Uplinks, and upto 2 Tb/s throughput. Provide competitive services that are high in quality and availability. The Nokia Network Services Platform (NSP), which manages the 7210 SAS and the Service Router Operating System, (SR OS), is a leading industry-leading Nokia Service Router product. It runs the Nokia Network Services Platform, (NSP), for high-performance, end to end service delivery, management, and carrier-SDN integration. 7210 SAS supports differentiated service, including Carrier Ethernet, IPVPN, and enhanced services.

Increase mobility and next-generation options for WAN and LAN. Access Ethernet, DSL and 5G as well as 802.11ax WiFi. The 1000 Series is ideal to be used as customer premises equipment (CPE). Cisco vManage automates configuration, deployment, and management for the 1000 Series. A centralized dashboard with high-quality visuals simplifies and extends control across the SDWAN fabric and to cloud edge. Gain enterprise-class security. Cisco Umbrella, Encrypted Traffic Analytics and advanced threat defense offer high-performance encryption and VPN, firewall, URL filtering, and firewall. Cisco Trust Anchor technology protects network firmware against threats. The Cisco IOS XE Software is the first fixed-configuration routers to feature the 1000 Series. Cisco IOS XE Software optimizes for cloud connectivity, enhanced visibility and full-stack cybersecurity, with robust multicloud capabilities.

You can enable a variety WAN connections including xDSL and Ethernet, as well as 3G/4G LTE and fiber. There are a variety of performance levels available to suit your needs. All your data, voice, video, and wireless can be accessed through one integrated router/switch. This desktop form factor is affordable for small and medium-sized businesses. All security features are included, including URL filtering, VPN, firewall, and VPN. These security features will help protect your customer experience as well as data. You can easily manage the 800 Series using drag-and-click interfaces at your location or third-party web-based apps.

The NCS 500 Series provides service providers with a secure and highly-available access-routing platform. Both fixed and modular form factors allow advanced automation and programming to provide 5G, Remote Phy, Carrier Ethernet, FTTx, and Carrier Ethernet. The NCS 560 and NCS 540 are designed for 5G. They have advanced timing, ultra low latency and high capacity. They are the foundation for pervasive Mobile Broadband, massive IoT and tactile Internet, smart cities, AR/VR, and pervasive Mobile Broadband. Segment routing, open and programmable interfaces with NETCONF data models and APIs allow you to build application-aware networks. You can also use streaming telemetry to get real-time visibility and real-time visibility. The highly scalable, energy-efficient NCS 500 Series allows you to intelligently combine network services on one platform. Ports that support 1/10/25/40/100 GBe allow you to scale your capacity.