Alternatives to L-Edit Photonics

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

The AFS Platform is foundry-certified and delivers SPICE accuracy of nm, 5x faster than traditional simulations, and >2x faster compared to parallel SPICE simulators. The fastest nm platform for circuit verification of analog, RF and mixed-signal circuits. Now includes the new eXTreme Technology. AFS eXTreme is 3x faster and has a 100M element capacity for large post-layout circuits. Supports all leading solvers. Best-in class usability allowing maximum reuse and reuse of verification infrastructure. Verification coverage is improved by advanced verification and debugging capabilities. Improved design quality and reduced time to market. SPICE high-sigma accuracy. 1000x faster than brute force simulation Easy to use and deploy. AFS eXTreme is available for no additional charge.

Beyond traditional RF simulation, design, analyze, verify radio frequency integrated circuits. Design and verification can be done with confidence using both nonlinear and steady-state solvers. Complex RFICs can be validated faster using wireless standard libraries. Verification of IC specifications via RF simulation must be done before taping out an RFIC. Simulators can simulate the effects of layout parasitics, complex modulated signal, and digital control circuitry. PathWave RFIC Design allows you to simulate in both frequency and time domains and can bring your designs to Cadence Virtuoso. Simulate components on silicon chips accurately. Optimize designs using sweeps and load-pull analysis. Incorporate RF designs into the Cadence Virtuoso environment. Performance can be increased with Monte Carlo and yield analysis. Safe operating area warnings simplify debugging. Use the most recent foundry technology right away.

Solido's AI-enabled solutions for variation-aware design and IP validation, library characterization and simulation are used by thousands of designers in the world's top semiconductor companies. Integrated suite of AI accelerated SPICE and Fast SPICE simulators to help customers accelerate critical design and verify for next-generation analog and mixed-signal designs. The industry's most comprehensive IP validation solution. It provides complete, seamless IP testing from design to tape out, across all design views, and IP revisions. Comprehensive AI-powered environment for nominal and variations-aware verification custom IC circuitry. Full design coverage is achieved in orders of magnitude fewer simulations with the accuracy of brute force techniques. Machine learning is used to provide fast, accurate library characterisation tools.

RFICs can be designed, analyzed, and verified using a variety of simulation methods. Gain confidence using steady-state and nonlinear solutions for design and verification. Wireless standard libraries speed up the validation of complex RFICs. Model silicon chips accurately. Optimize designs using sweeps and load pull analysis. Simulate RF designs using Cadence Virtuoso or Synopsys Custom Compiler. Monte Carlo and yield analyses can be used to increase performance. Early in the design phase, assess the error vector magnitude (EVM), for the latest communication standard. Use the latest technology in foundries immediately. Early in the RFIC development phase, it is essential to monitor system IC specifications like EVM using RF simulation. Simulations include effects from parasitics on layouts, complex modulated signal, and digital circuitry. Keysight RFPro Circuit allows you to simulate in the frequency and time domain.

Ansys Exalto, a post-LVS RLCk extractor software solution, allows IC designers to capture unknown crosstalk between different blocks in their design hierarchy. It extracts lumped-element parasitics from the design hierarchy and generates an accurate model for electrical and magnetic coupling. Exalto interfaces well with most LVS tools, and can be used in conjunction with the RC extraction tool you choose. Ansys Exalto post LVS RLCk extraction allows IC designers to accurately predict electromagnetic and substrate-coupling effects for signoff on circuits previously "too large to analyze." The extracted models can be back-annotated to any schematic or netlist and support all circuit simulators. Modern silicon systems have seen a rise in RF and high speed circuits. This has made electromagnetic coupling a first-order effect that must be accurately modelled to ensure silicon success.

To manage the increasing complexity, a new place and route paradigm is needed to design at advanced process nodes. Aprisa is an advanced physical design platform that focuses on detail-routes for modern SoCs. Aprisa is a RTL2GDSII implementation that offers complete synthesis, place-and route functionality and block-level implementation for top-level hierarchical design. Its tape-out correlation with signoffs tools, for both STA timing and the DRC, reduces design closing and ensures optimal performance and power. Aprisa delivers optimal PPA out-of-the-box. This helps physical designers reduce effort at each stage of the place and route flow and achieve faster times to market. Unified architecture and common analyses engines ensure excellent timing between implementation steps and signoff tools.

Precision offers FPGA synthesis that is vendor-independent. It offers best-in class performance and area with high reliability design capabilities and close links to simulation. Precision's products have been tightly integrated with Siemens FormalPro LEC, which is used for formal equivalency checks. HDL Designer is used for design capture and verification using ModelSim/Questa. Precision RTL is Siemens' entry-level FPGA synthesizer. It offers best-in class quality results and a vendor-independent FPGA solution. Many space and mil/aero applications need specialized FPGAs that are protected from SEEs. NanoXplore has introduced new FPGAs that are aimed at this market. Precision Synthesis is the first company to offer full synthesis for the NG Ultra device in partnership with NanoXplore. Precision Synthesis has seamless integration with NXmap P&R to complete the design from RTL to gates and bitstream generation.

Ansys Icepak solves thermal management problems using CFD. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak offers powerful electronic cooling solutions using the industry-leading Ansys Fluent CFD solver to perform thermal and fluid flow analysis of integrated circuits, packages, printed circuit board (PCBs), electronic assemblies and enclosures. Ansys' Icepak CFD solution uses the Ansys Electronics Desktop GUI (GUI). Perform heat transfer analysis conjugated with conduction, convection and radiation. Advanced capabilities include laminar and turbulent flow modeling, species analysis, including radiation and convection. Ansys PCB Design Solution allows you to simulate PCBs and ICs and accurately evaluate a system.

Our next-generation platform enables chip developers and verification engineers design and debug 10x quicker. Verilator allows you to run thousands of parallel tests at the touch of a button. Share test results and waveforms seamlessly with anyone in your company, tag coworkers on signals and track test and regression errors. Verilator is used to distribute test runs and Dockerized simulation binaries across our compute cluster. We collect the log files, results, and optionally rerun failed tests to generate waveforms. Docker allows us to ensure that our test runs are consistent, reproducible and repeatable. SiLogy increases chip developer productivity by enabling faster debugging and design times. Before SiLogy the only way to debug a failing test was by copying lines from logs, debugging using waveforms on local machines, or rerunning simulations that could take days to run.

L-Edit MEMS has become the industry standard for 3D MEMS design. L-Edit is the first step in creating the digital twin of MEMS devices. MEMS designers can benefit from an integrated environment that supports MEMS design, fabrication modeling and links to FEM tools. L-Edit MEMS has become the gold standard in MEMS design. It is the only tool that supports native curves and was developed specifically for MEMS design. It is the foundation for the MEMS digital Twin, supporting device design and 3D fabrication modeling through partnerships. Create a 3D model using layout data and fabrication processes description. This tool gives a 3D graphic representation of the MEMS manufacturing process. Multi-physics simulation using popular FEM analysis software. Export models to FEM/BEM simulations for 3D analyses. Component libraries enable design reuse.

Ansys Electronics' solution suite reduces product development time, minimizes costs, and ensures regulatory compliance. All of this while helping you create the best-in class and cutting-edge product. Use the simulation capabilities of Ansys for the most critical aspects in your designs. We help you solve the most important aspects of your product design through simulation. We provide the best simulators for any design work you do, whether it is antenna, RF or microwave, PCB, package or IC design, electromechanical device, etc. These solutions will help you overcome any electromagnetic, temperature and parasitic challenges, as well as SI, PI and parasitic issues. We then build on this by providing complete product simulations, allowing you first-pass success when designing an airplane, car or other system.

Ansys Maxwell solves EM fields for electric machines, transformers and wireless charging. It also works with actuators, permanent magnet latches and other electrmechanical devices. It can solve static, frequency-domain, and time-varying electric fields. Maxwell also offers specialized interfaces for power converters and electric machines. Maxwell allows you to precisely characterize the transient, nonlinear motion of electromechanical components as well as their effects on the drive circuit design and control system design. Maxwell's electromagnetic field solvers can be seamlessly linked to the integrated circuit or systems simulation technology to enable you to understand the performance of electromechanical system before you build a prototype in hardware. Maxwell provides a reliable simulation of low-frequency electromagnetic field in industrial components.

Cadence®, Sigrity X OptimizationPI™ technology performs a complete AC frequency analyzer of boards and IC package to ensure high performance and save between 15% and 50 % in decoupling capacitor costs. It supports both pre-and post-layout studies and quickly pinpoints the most cost-effective decap selections. Sigrity X OptimizePI is based on proven Cadence hybrid magnetic circuit analysis technology combined with the unique Sigrity Optimization engine to help you quickly identify the best possible placement and decap locations.

Cadence®, Sigrity X PowerSI® technology helps you to tackle increasingly difficult issues related switching noise, signal coupling and target voltage levels. It provides fast, accurate and detailed electrical analyses of full IC packages and PCBs. It can be used to develop power and signal integrity guidelines before layout, or after layout to verify performance and improve the design without a prototype. Sigrity X's electromagnetic (EM) solver technology allows you to perform a wide range of studies, including identifying trace and via coupling problems, power/ground fluctuation caused by simultaneously switching out put, and designing regions that are below or above voltage targets. PowerSI technology allows you to extract frequency-dependent parameter models for network networks and visualize complex spatial relationships.

Oasys RTL addresses the need for increased capacity, faster runtimes and improved QoR by optimizing on a higher abstraction level and using integrated floorplanning capabilities. Oasys RTL provides better results by enabling floorplanning and fast optimization iterations. Power-aware synthesis includes support for multithreshold libraries and automatic clock gating. Oasys RTL inserts the appropriate level-shifters, isolation cells and retention registers based on the power intent defined in the UPF. Oasys RTL can create a floorplan from the design RTL by using design dataflow, timing, power, area and congestion constraints. It takes into account regions, fences and blockages as well as other physical guidance by using the advanced floorplan-editing tools. It also automatically places macros and pins.

Altium's PDN Analyzer tool integrates with Altium Designer. This allows you to easily troubleshoot issues such as insufficient or excessive copper or uncontrolled voltage drops. You can also detect marginal voltage at critical power points, copper islands or peninsulas, and other issues that could be present in your PCB power system. PDN is the power system for active circuits on printed circuit boards. This includes all interconnections between the voltage regulator module, the metallization pads and die on integrated devices that are used for supply and return power. The entire length of the power delivery network must meet the IC supply voltage limits. Validating your power budget accurately means taking into account the minimum and maximum device limits, worst case voltage drops, combined return-path currents, and other factors. PDN Analyzer will show you exactly where these problems are.

TopSpice is a true analog/digital/behavioral mixed-mode circuit simulator for the PC. It is the most advanced SPICE simulation in its price range. It also offers compatibility, an integrated design environment that is easy to use, from schematic capture to graphic waveform analysis. TopSpice allows you to design using either text netlists (SPICE) or schematic drawings. All design and simulation features are available in either the schematic editor or netlist editor. TopSpice comes with a full-featured mixed mode mixed-signal simulator that can simulate circuits containing any combination of analog devices and digital functions, as well as high-level behavioral block. TopSpice allows you to verify and optimize the design of your system down to the transistor.

Sigrity X Advanced SI Technology offers advanced signal integrity analysis for PCBs and IC packaging, covering DC up to 56GHz, with features such as automated die-todie SI analysis, topology exploring, and simulation of high-speed interfaces. It supports IBIS-AMI and customizable compliance kits to ensure that your designs meet rigorous standards.

ExpressPCB is pleased to announce several enhancements to ExpressPCB Plus software. We offer peace of mind when it comes to validating your design from schematic to layout before manufacturing. ExpressPCB Plus allows you to link the ExpressSCH schematic netlist to the ExpressPCB Plus PCB layout. To assist with board layout, a "Net Connection” tool was added to allow users highlight connected pads in a net using the linked schematic. Validates the ExpressPCB Plus layout to ensure it is equivalent to the ExpressSCH schematic list. Reports errors for missing or additional components, pins or other design elements. Users can highlight errors and zoom in to pinpoint them. Users can correct errors and validate edits with one tool. Export capability for errors in Microsoft Excel format.

PathWave ADS provides integrated design guidance via templates to make it easier to get started. It is easy to find the part that you need with the extensive component libraries. Automatic sync allows you to visualize the physical layout and create schematic designs. Data allows teams to visualize whether their designs are meeting specifications. PathWave ADS's data display and analytics capabilities produce graphs, charts and diagrams that will give you design confidence. With wizards, templates, and design guides, you can quickly accelerate your design. The entire design flow includes schematic, layout and circuit. As frequency and speed increase on printed circuit boards (PCBs), signal and power integrity become more important. Electronic device failures can be caused by transmission line effects. To simulate the board accurately, it is necessary to model vias, traces, and interconnects.

Online PCB design software that is professional-grade and offers free technical support. PCB artist features include multi-page schematics, Netlist import, and more. Advanced circuits' online PCB software is easy to use and is the best free PCB layout software. Our PCB design software is a big reason why our customers love doing business with Advanced Circuits. We help you design printed circuit boards correctly, which will save you time and money.

EAGLE (electronic design automation) software allows printed circuit board (PCB), designers to seamlessly connect schematic diagrams and component placement. It also includes comprehensive library content. EAGLE offers a variety of PCB layout tools that will help you bring your design to life. Drag and drop reusable blocks between your projects. To ensure your schematic stays on track, validate your design using a complete set electronic rule checks. All changes are automatically synchronized between your layout and schematic, so you can concentrate on the creative process. You can control your design flow and avoid any unexpected surprises by using fully customizable PCB design rules. You can rest assured that your next design will be completed with worry-free libraries. Our growing catalog allows you to find and place parts dynamically.

PowerPro offers the most comprehensive set of features to RTL designers to "design-for-low-power". It offers power estimations for both RTL- and Gate-level designs. Early power checks are available to quickly identify power issues during RTL design development. Clock and memory gating is also offered to optimize the design. PowerPro offers the most comprehensive set of features to RTL designers to "design-for-low-power". It provides power analysis for RTL and gate level designs, early power checking to quickly identify power issues during RTL design, and clock and Memory gating for optimizing the design for power. PowerPro provides highly accurate estimations within 10% of the signoff. This technology is based on advanced engines which enable a wide range of analysis capabilities. PowerPro's automatic optimization produces low-power RTL with integrated logic equivalence checks. PowerPro's automatic power optimization is the only low-power RTL technology on the market that has been proven.

Sigrity X Platform combines innovation and optimization to take you into the future. Unlock the key to flawless power and signal integrity in your PCB designs and IC packages, and leap beyond the current limitations of signal integrity technology. Imagine navigating the complexity of electronic design with ease and precision, and exceeding your time-to market targets. Sigrity X is not just another tool. It unlocks seamless in-design synergy between Allegro X PCBs and IC Packages. Explore a comprehensive set of SI/PI Analysis, in-design Interconnect Modeling, and PDN Analysis tools that will supercharge your performance and ensure your projects meet deadlines and budgets. Use the Sigrity X Platform to achieve flawless performance and reliability in your next design.

Synopsys HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

Reduce design complexity with high-quality DFT. Tessent silicon management solutions include advanced features for debugging, safety and security, and in-life analytics to meet today's evolving silicon lifecycle challenges. Create an infrastructure to make designs more testable. Silicon lifecycle management solutions enable high-quality testing, identify defects and hidden limiters of yield, and go beyond test to system debugging, validation, and validation. This ecosystem of tools analyzes data in order to provide critical insights into the system that can be used for monitoring. Best-in-class DFT, debug and in-life monitoring solutions, combined with powerful data analytics, will ensure the highest test quality and accelerate yield ramp. They will also improve safety, security and reliability throughout the silicon lifecycle. Reduce time to yield, manage production excursions, and recover the yield caused by systematic defects.

The Cadence AWR Design Environment Platform is a powerful tool that accelerates the development of RF/microwave products by enhancing engineering productivity and reducing turnaround time. This seamlessly integrated platform provides engineers with advanced high frequency circuit and system simulations coupled with in-design electromagnetic/thermal analyses to create manufacturing-ready high-frequency intellectual property. The user interface is intuitive and powerful, designed to increase engineering productivity. It offers smart, customizable designs flows that cater to today's high frequency semiconductor and PCB technologies. A unified design system facilitates front-to back physical design flow. Electrical and layout design entries can be dynamically linked to ensure that components placed into an electrical schematic will automatically generate a synchronized layout.

Ultiboard is a software for designing and layout printed circuit boards. It integrates seamlessly with Multisim, allowing for faster prototyping. Ultiboard software allows for efficient PCB layout and routing in a configurable environment. It allows you to place copper and parts with manual precision, defining critical board elements. You can quickly create a design using its automated functionality. You can easily manage, control, and create any board layout using the advanced spreadsheet view, toolbox, or design wizards. Integration with Multisim software is seamless. This allows for easy schematic transfer to the PCB. Forward and backward annotations allow for design iteration management. Export industry-standard file formats like Gerber and DXF are available to complete the design flow, from schematic to layout. Our software-connected, tailored approach is designed to help you engineer the next step.

A web-based design and sales tool for solar professionals that can completely transform your proposal generation process. HelioScope is fast, simple, and bankable. It has a robust 3D design engine, bankable energy yield calculator, and a drag-and-drop proposal editor. 3D design. Rapid proposals Bankable simulations. Unlimited designs. Live support. Single line diagrams. Automatic cad export. One-click sharing. Systems up to 5MW 45,000 component library. Global weather coverage and pan file support.

Ansys Nuhertz filterSolutions automates RF, microwave, and digital filter design, optimization, and synthesis in a simple and efficient process. FilterSolutions takes your specifications for filter performance, synthesizes lumped components and physical layout realizations, then automatically sets up filter analysis in the Ansys HFSS electromagnetic sim. Ansys Nuhertz FilterSolutions significantly speeds up the design and fabrication of planar and lumped elements (surface mount). It also contains synthesis tools for digital, switched capacitor, and active filters. The netlist of active filters is available in SPICE format. C-code can be exported by the digital filter synthesis module for the generated filter.

Microwave Office is a powerful tool for the design of passive components, such as filters, couplers and attenuators. It also supports active devices that operate under small-signal conditions, such as buffer amplifiers and low noise amplifiers. The linear configuration allows for simulation of S parameters (Y/Z/H/ABCD), linear stability, noise figure and return loss/voltage-standing-wave ratio (VSWR) as well as real time tuning, optimization and yield analysis. All E-series Microwave Office Portfolios include synchronous schematic/layout editors, 2D/3D viewer, libraries of high-frequency transmitted transmission models, surface mount vendor component RF model with footprints and measurement-based simulations. Microwave Office PCB supports analysis of RF/microwave systems with the APLAC HB Simulator and its powerful multirate HB, time-variant simulation engine and transient-assisted-HB.

You can quickly design advanced board layouts using interactive routing and the intelligent SitusTM Autorouting technology. With Native 3D™, PCB editing and STEP support, you can collaborate effortlessly with your mechanical design team. Advanced electronics can be accurately simulated and shipped using integrated XSPICE digital and analog simulations. With hierarchical schematic capture and constraint-driven PCB layout technology, you can quickly transform your ideas into reality. With an intuitive interface and customizable workflow, you can instantly get started on your next design project. Altium designer and EAGLE compatibility allow you to access your entire design history. With real-time availability and pricing data from hundreds of suppliers, you will never miss another deadline. With the Circuitstudio content library, you can quickly create custom parts.

Multisim™, a software that integrates industry-standard spice simulation with an interactive schematic environment, allows you to instantly visualize and analyze electronic circuit behavior. Its intuitive interface allows teachers to reinforce circuit theory and improve theory retention throughout their engineering curriculum. Multisim™, which adds powerful circuit simulation and analysis into the design flow, helps researchers and designers decrease iterations and save development costs. Multisim™, for Education, is circuit teaching software for power electronics courses and labs. Multisim™, provides engineers with the SPICE simulation and analysis tools and PCB design tools to quickly iterate on designs, improve prototype performance, and speed up prototyping.

Electronic designs are becoming more complex, making them harder to detect errors. These errors can result in high costs and hundreds or hours of work. It is important to detect these errors early on in order to prevent damage. In many cases, these mistakes are only discovered during the testing phase or on the customer's premises. BQR CircuitHawk, a unique and powerful (patent-based) tool for electrical circuit stress analysis and design error detection is available. CircuitHawk detects errors in the design phase before layout and production. So, during the final verification, no errors in schematics, connectivity, or stress are detected. CircuitHawk reduces design cycles and the time to market. This saves money and improves corporate reputation. CircuitHawk integrates design error detection, thermal, MTBF, and service life predictions at the schematic level before PCB layout and manufacturing.

Maglr is a content creation platform that allows companies to create visual and interactive content in order to promote their products or services. Join them in replacing static content with better content experiences. Digital publications can now be created by marketers and designers, with no coding. They are easily measurable and responsive. The platform allows you to update all types of content found on and around websites. Digital magazines, sales presentations and white papers, annual reports, landing page pages, campaign microsites, product catalogues, embedded content, and many other uses. Two editors, infinite possibilities Maglr offers two types of content editors: the drag-and-drop Block editor or the advanced Pro editor. Each editor comes with a set ready-to-use responsive templates. You can create stunning content without writing a single line code. Maglr is the content experience tool that will enhance your content marketing strategy.

Visually create stunning white label websites for clients without any code. Drag and Drop elements onto your design canvas to create stunning custom websites right down to the last pixels. Webydo's Designer will handle the code. You can adapt your websites to ensure the best user experience on every device. Webydo's built in CMS automatically generates layouts for each breakpoint and lets you publish them with a click. It allows clients to log in and edit, or update content independently.

All-in-one prototyping software to create web and mobile apps prototypes that behave like the real thing. UX Designers can create high quality prototypes for websites or apps for Android, iOS, and Web using our intuitive drag-and drop interface. No code involved. Access thousands of components in our UI Kits for free and bring your ideas and concepts to life. Justinmind is a prototyping tool that is free to use. You can start with the free version and then upgrade to get more prototyping tools later.

ZenitPCB Layout allows you to create professional printed circuit boards (PCB). It is an easy-to-use CAD program that allows you to quickly realize your projects. ZenitPCB Layout can be used for personal or semi-professional purposes. It is limited to 800 pins. This is the boundary between hobby and professional work. ZenitPCB Layout allows you to create your project from either the schematic capture or the layout. ZenitPCB Layout can create a printed circuit board that is both singleside and doubleside. It works with the rules of each project or the general net class. Here are some pcb features. ZenitPCB GerberView allows you to view the gerbers created and gives you more control over the project.

The award-winning mPower software provides power integrity analyses for digital, 3D, and analog ICs across all design flows, at any scale. Analog, semicustom, and digital integrity analysis can easily be integrated into existing design flow while scaling to circuits or chips of any size. The mPower suite of tools performs fast, scalable and efficient analog and digital integrity analysis, from the smallest blocks up to the largest full chip layouts, to verify design goals and performance. It provides high-confidence tape outs for all technologies and designs. The mPower Analog Power Integrity Analysis solution provides simulation-based high-capacity dynamic analysis to ensure power integrity of analog designs at any scale. The mPower tool uses industry-standard inputs, optimized memory requirements and a scalable architecture to increase scalability of digital power integrity analyses and decrease runtimes.

Zenario is an easy to learn content management system that will grow with your ideas. Zenario is free to download and costs only $21/month on AWS. Gridmaker's intuitive interface allows even novice administrators to create stunning pages. It is drag-and-drop friendly. It offers a variety of controls for page behavior, including size, CSS class, mobile/desktop visibility, and page behavior. As an administrator, you can edit CSS files from a rendered page. These can be tested in preview mode and then applied immediately. Gridmaker and the CSS Editor are available for permission on a per-administrator level. Editing HTML and JavaScript code is possible. It is possible to apply HTML/JS across a site for all pages that use a particular layout or just one page.

App building tool that allows businesses to transform designs into responsive prototypes. Write CSS faster with built-in templates for animations/flexbox/grid layout. You can test your website's responsiveness on 20+ devices using real-time sync. Hover to inspect CSS - you don't need to open devtools. InTab's No Code CSS editor allows you to visually edit any website.

Project Photon OS™, an open-source, minimal Linux container host, is optimized for cloud native applications, cloud platforms, VMware infrastructure, and other cloud-native apps. Photon OS 3.0 includes ARM64 support, improvements to the installer and updated packages. We invite customers, partners, and community members, to collaborate on Photon OS to run high performance virtual machines and containerized apps.

Our customers can quickly design, develop, implement, and sustain business-centric solutions using the BizFlow business process management software. BizFlow Corp. has been working with customers since 1998 to standardize, automate, and streamline operations. AppDev provides a "hybrid agile approach" to developing web applications by offering the functionality of a prototype (go-livable mockup). AppDev is data-centric and empowers users to create data entities, without the need to code, which allows them to modify or reuse data and data attributes. BizFlow's AppDev platform allows non-technical users (citizen programmers) to quickly create fully-customized digital forms and applications.

One animated circuit is equivalent to a thousand equations or diagrams. The schematic is accompanied by animations of voltages and currents. This gives a great insight into the operation of the circuit. The real-time simulation engine was custom-built to be fast and interactive. Simulate everything from simple logic gates and resistors to complex transistor-level designs and mixed-signal circuits with just one click. You can adjust potentiometers and LED current-limiting resistors while the simulation is running. Your changes will be reflected in real-time. The mini-waveforms that appear on top of the schematic wires are different for digital and analogue signals. Digital wires are color coded, while constant analog voltages are shown in numbers. In the XY mode, any pair of time domain signals can be plotted. The grid ticks and oscilloscope scale are automatically updated to convenient values when the data changes.

Massive personalization that transforms student engagement Features specifically designed for academia. Flexible layout builder that technical and business users will love. You can create different page types or RSS feeds by using the new page wizards. Pages are easy to modify thanks to drag-and-drop, intuitive gadgets, and true WYSIWYG editor. You can crop, rotate, rename, rename, save and resize photos in many formats. You can also use gadgets to insert images or videos. Our failsafe tools, including multi-browser previews and quality checks, make it easy to publish pages immediately. No publishing queues, publish pages, directories, or entire websites! Or, schedule content for later publication. With configurable themes, syntax highlighting and customizable themes, you can choose which users can modify source code. SaaS deployment allows you to enjoy the benefits of letting us handle the installation, upgrades and maintenance, allowing you to focus on other projects.

This new method allows you to visually layout Origami prototypes using freeform drawing tools, text editor, and visual components. You can create flows between screens using built-in present animations. Visually arrange your components in the Canvas. Then, combine them with powerful interactions in patch editor. Native hardware APIs are available. With patches that unlock hardware capabilities, you can expand the potential of your prototypes. Paste editable vector shapes and text layers into Origami. Origami allows you to capture, trim, and export video directly from your prototype. You can easily share your prototypes for critique, reviews, or just to have fun. Origami performance has been upgraded. Faster patch editor, faster viewer and faster everything. You can preview your prototype on both physical and simulated devices. It is as easy as copying and pasting from Sketch or other design tools. Make sure that you have the Origami pasteboard installed from Figma's plugin community.

Merge technology is a revolutionary way to speed up product development. UI designers and developers can create consistent interfaces with the same building blocks. Create prototypes that feel like the final product. Use our design tool to get creative or use hundreds of pre-built UI elements. Integrate with Storybook, Git repo or NPM package to access code components directly from your website, app, or design system. You can design with the exact same UI components that developers use to build products. You don't need to know any coding skills - drag and drop the elements. Design inclusive products that conform to WCAG standards. Your prototypes can be tested with built-in features such as the Contrast Checker or Color Blindness Simulator. Your prototypes will be able to replicate the final product experience during usability testing thanks to Auto Layout, States, Variables and Conditional Interactions.

Quandela Cloud has a wide range functionalities. Perceval is our photonic quantum computing platform. Perceval uses Python as its programming language, so coding on Quandela QPUs is easy. You can also use a variety of unique algorithms that are already implemented, including those for solving PDEs, clustering, generating random numbers, solving logistics problems, computing properties, etc. Then, the specifications and status of Quandela QPUs will be displayed. You can select the one you want, run the job and monitor its progress on the interface for job monitoring.

LVGL, the most popular open-source embedded graphics library, allows you to create beautiful UIs on any MCU, display type, or MPU. SquareLine Studio is our drag-and drop UI editor. It simplifies the development. There are 30+ built-in tools, 100+ style attributes, a web-inspired layout manager, and a typography support system. LVGL is open source, and it has no external dependencies. This makes porting incredibly easy. It can be used to drive ePaper displays, monochrome OLED or TFT displays and even monitors. It's also free for commercial projects. SquareLine Studio allows designers to create fully functional UIs using a drag-and-drop editor for LVGL. SquareLine Studio, like LVGL is vendor-agnostic. We have a large network of companies and people who can help you develop and design your UIs.