Alternatives to L-Edit MEMS

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Ansys MotorCAD is a dedicated tool for electric machine design. It allows you to quickly simulate multiphysics across the entire torque-speed operating range. Motor-CAD allows engineers to evaluate motor topologies across the entire operating range. This allows them to create designs that are optimized for size, efficiency, and performance. Motor-CAD software's four modules, Emag, Therm Lab, Mech, allow multiphysics calculations to be performed quickly, iteratively, and users can move from concept to final design in a shorter time. Motor-CAD users can explore more motor topologies and fully evaluate the impact of advanced loss effects during the initial stages of an electrical mechanical design with Motor-CAD's streamlined data input process. This release features powerful new features for design optimization and multi-physics analysis, as well as system modeling for electric motors. Multiphysics simulations are fast across the entire torque-speed range.

Beyond traditional RF simulation, design, analyze, verify radio frequency integrated circuits. Design and verification can be done with confidence using both nonlinear and steady-state solvers. Complex RFICs can be validated faster using wireless standard libraries. Verification of IC specifications via RF simulation must be done before taping out an RFIC. Simulators can simulate the effects of layout parasitics, complex modulated signal, and digital control circuitry. PathWave RFIC Design allows you to simulate in both frequency and time domains and can bring your designs to Cadence Virtuoso. Simulate components on silicon chips accurately. Optimize designs using sweeps and load-pull analysis. Incorporate RF designs into the Cadence Virtuoso environment. Performance can be increased with Monte Carlo and yield analysis. Safe operating area warnings simplify debugging. Use the most recent foundry technology right away.

RFICs can be designed, analyzed, and verified using a variety of simulation methods. Gain confidence using steady-state and nonlinear solutions for design and verification. Wireless standard libraries speed up the validation of complex RFICs. Model silicon chips accurately. Optimize designs using sweeps and load pull analysis. Simulate RF designs using Cadence Virtuoso or Synopsys Custom Compiler. Monte Carlo and yield analyses can be used to increase performance. Early in the design phase, assess the error vector magnitude (EVM), for the latest communication standard. Use the latest technology in foundries immediately. Early in the RFIC development phase, it is essential to monitor system IC specifications like EVM using RF simulation. Simulations include effects from parasitics on layouts, complex modulated signal, and digital circuitry. Keysight RFPro Circuit allows you to simulate in the frequency and time domain.

Sigrity X Advanced SI Technology offers advanced signal integrity analysis for PCBs and IC packaging, covering DC up to 56GHz, with features such as automated die-todie SI analysis, topology exploring, and simulation of high-speed interfaces. It supports IBIS-AMI and customizable compliance kits to ensure that your designs meet rigorous standards.

Precision offers FPGA synthesis that is vendor-independent. It offers best-in class performance and area with high reliability design capabilities and close links to simulation. Precision's products have been tightly integrated with Siemens FormalPro LEC, which is used for formal equivalency checks. HDL Designer is used for design capture and verification using ModelSim/Questa. Precision RTL is Siemens' entry-level FPGA synthesizer. It offers best-in class quality results and a vendor-independent FPGA solution. Many space and mil/aero applications need specialized FPGAs that are protected from SEEs. NanoXplore has introduced new FPGAs that are aimed at this market. Precision Synthesis is the first company to offer full synthesis for the NG Ultra device in partnership with NanoXplore. Precision Synthesis has seamless integration with NXmap P&R to complete the design from RTL to gates and bitstream generation.

Ansys Electronics' solution suite reduces product development time, minimizes costs, and ensures regulatory compliance. All of this while helping you create the best-in class and cutting-edge product. Use the simulation capabilities of Ansys for the most critical aspects in your designs. We help you solve the most important aspects of your product design through simulation. We provide the best simulators for any design work you do, whether it is antenna, RF or microwave, PCB, package or IC design, electromechanical device, etc. These solutions will help you overcome any electromagnetic, temperature and parasitic challenges, as well as SI, PI and parasitic issues. We then build on this by providing complete product simulations, allowing you first-pass success when designing an airplane, car or other system.

The AFS Platform is foundry-certified and delivers SPICE accuracy of nm, 5x faster than traditional simulations, and >2x faster compared to parallel SPICE simulators. The fastest nm platform for circuit verification of analog, RF and mixed-signal circuits. Now includes the new eXTreme Technology. AFS eXTreme is 3x faster and has a 100M element capacity for large post-layout circuits. Supports all leading solvers. Best-in class usability allowing maximum reuse and reuse of verification infrastructure. Verification coverage is improved by advanced verification and debugging capabilities. Improved design quality and reduced time to market. SPICE high-sigma accuracy. 1000x faster than brute force simulation Easy to use and deploy. AFS eXTreme is available for no additional charge.

Ansys Exalto, a post-LVS RLCk extractor software solution, allows IC designers to capture unknown crosstalk between different blocks in their design hierarchy. It extracts lumped-element parasitics from the design hierarchy and generates an accurate model for electrical and magnetic coupling. Exalto interfaces well with most LVS tools, and can be used in conjunction with the RC extraction tool you choose. Ansys Exalto post LVS RLCk extraction allows IC designers to accurately predict electromagnetic and substrate-coupling effects for signoff on circuits previously "too large to analyze." The extracted models can be back-annotated to any schematic or netlist and support all circuit simulators. Modern silicon systems have seen a rise in RF and high speed circuits. This has made electromagnetic coupling a first-order effect that must be accurately modelled to ensure silicon success.

Design your photonic integrated system in a layout-centric flow. Designers can implement their designs using either drag-and drop or script-driven methodologies. Both are done in the same custom IC layout editor which drives the physical verification process and tape-out. L-Edit Photonics allows the creation of a fast photonic design by using drag-and-drop in an IC Layout Editor, without having to code a single line. Once the design has been completed, a netlist for photonic simulation can be extracted. PIC design with a complete IC Layout Editor. Create a layout in a single click. Supports a flow of design that is layout-centric, where schematics are not required. S-Edit allows for a schematic flow. A simulation netlist is a useful input to a photonic sim. Integration with our partners allows us to support photonic simulation. Multiple foundries offer photonic PDKs.

Sigrity X Platform combines innovation and optimization to take you into the future. Unlock the key to flawless power and signal integrity in your PCB designs and IC packages, and leap beyond the current limitations of signal integrity technology. Imagine navigating the complexity of electronic design with ease and precision, and exceeding your time-to market targets. Sigrity X is not just another tool. It unlocks seamless in-design synergy between Allegro X PCBs and IC Packages. Explore a comprehensive set of SI/PI Analysis, in-design Interconnect Modeling, and PDN Analysis tools that will supercharge your performance and ensure your projects meet deadlines and budgets. Use the Sigrity X Platform to achieve flawless performance and reliability in your next design.

Ansys Icepak solves thermal management problems using CFD. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak offers powerful electronic cooling solutions using the industry-leading Ansys Fluent CFD solver to perform thermal and fluid flow analysis of integrated circuits, packages, printed circuit board (PCBs), electronic assemblies and enclosures. Ansys' Icepak CFD solution uses the Ansys Electronics Desktop GUI (GUI). Perform heat transfer analysis conjugated with conduction, convection and radiation. Advanced capabilities include laminar and turbulent flow modeling, species analysis, including radiation and convection. Ansys PCB Design Solution allows you to simulate PCBs and ICs and accurately evaluate a system.

To manage the increasing complexity, a new place and route paradigm is needed to design at advanced process nodes. Aprisa is an advanced physical design platform that focuses on detail-routes for modern SoCs. Aprisa is a RTL2GDSII implementation that offers complete synthesis, place-and route functionality and block-level implementation for top-level hierarchical design. Its tape-out correlation with signoffs tools, for both STA timing and the DRC, reduces design closing and ensures optimal performance and power. Aprisa delivers optimal PPA out-of-the-box. This helps physical designers reduce effort at each stage of the place and route flow and achieve faster times to market. Unified architecture and common analyses engines ensure excellent timing between implementation steps and signoff tools.

Cadence®, Sigrity X PowerSI® technology helps you to tackle increasingly difficult issues related switching noise, signal coupling and target voltage levels. It provides fast, accurate and detailed electrical analyses of full IC packages and PCBs. It can be used to develop power and signal integrity guidelines before layout, or after layout to verify performance and improve the design without a prototype. Sigrity X's electromagnetic (EM) solver technology allows you to perform a wide range of studies, including identifying trace and via coupling problems, power/ground fluctuation caused by simultaneously switching out put, and designing regions that are below or above voltage targets. PowerSI technology allows you to extract frequency-dependent parameter models for network networks and visualize complex spatial relationships.

Solido's AI-enabled solutions for variation-aware design and IP validation, library characterization and simulation are used by thousands of designers in the world's top semiconductor companies. Integrated suite of AI accelerated SPICE and Fast SPICE simulators to help customers accelerate critical design and verify for next-generation analog and mixed-signal designs. The industry's most comprehensive IP validation solution. It provides complete, seamless IP testing from design to tape out, across all design views, and IP revisions. Comprehensive AI-powered environment for nominal and variations-aware verification custom IC circuitry. Full design coverage is achieved in orders of magnitude fewer simulations with the accuracy of brute force techniques. Machine learning is used to provide fast, accurate library characterisation tools.

Oasys RTL addresses the need for increased capacity, faster runtimes and improved QoR by optimizing on a higher abstraction level and using integrated floorplanning capabilities. Oasys RTL provides better results by enabling floorplanning and fast optimization iterations. Power-aware synthesis includes support for multithreshold libraries and automatic clock gating. Oasys RTL inserts the appropriate level-shifters, isolation cells and retention registers based on the power intent defined in the UPF. Oasys RTL can create a floorplan from the design RTL by using design dataflow, timing, power, area and congestion constraints. It takes into account regions, fences and blockages as well as other physical guidance by using the advanced floorplan-editing tools. It also automatically places macros and pins.

Cadence®, Sigrity X OptimizationPI™ technology performs a complete AC frequency analyzer of boards and IC package to ensure high performance and save between 15% and 50 % in decoupling capacitor costs. It supports both pre-and post-layout studies and quickly pinpoints the most cost-effective decap selections. Sigrity X OptimizePI is based on proven Cadence hybrid magnetic circuit analysis technology combined with the unique Sigrity Optimization engine to help you quickly identify the best possible placement and decap locations.

Ansys Maxwell solves EM fields for electric machines, transformers and wireless charging. It also works with actuators, permanent magnet latches and other electrmechanical devices. It can solve static, frequency-domain, and time-varying electric fields. Maxwell also offers specialized interfaces for power converters and electric machines. Maxwell allows you to precisely characterize the transient, nonlinear motion of electromechanical components as well as their effects on the drive circuit design and control system design. Maxwell's electromagnetic field solvers can be seamlessly linked to the integrated circuit or systems simulation technology to enable you to understand the performance of electromechanical system before you build a prototype in hardware. Maxwell provides a reliable simulation of low-frequency electromagnetic field in industrial components.

Our next-generation platform enables chip developers and verification engineers design and debug 10x quicker. Verilator allows you to run thousands of parallel tests at the touch of a button. Share test results and waveforms seamlessly with anyone in your company, tag coworkers on signals and track test and regression errors. Verilator is used to distribute test runs and Dockerized simulation binaries across our compute cluster. We collect the log files, results, and optionally rerun failed tests to generate waveforms. Docker allows us to ensure that our test runs are consistent, reproducible and repeatable. SiLogy increases chip developer productivity by enabling faster debugging and design times. Before SiLogy the only way to debug a failing test was by copying lines from logs, debugging using waveforms on local machines, or rerunning simulations that could take days to run.

Altium's PDN Analyzer tool integrates with Altium Designer. This allows you to easily troubleshoot issues such as insufficient or excessive copper or uncontrolled voltage drops. You can also detect marginal voltage at critical power points, copper islands or peninsulas, and other issues that could be present in your PCB power system. PDN is the power system for active circuits on printed circuit boards. This includes all interconnections between the voltage regulator module, the metallization pads and die on integrated devices that are used for supply and return power. The entire length of the power delivery network must meet the IC supply voltage limits. Validating your power budget accurately means taking into account the minimum and maximum device limits, worst case voltage drops, combined return-path currents, and other factors. PDN Analyzer will show you exactly where these problems are.

Reduce design complexity with high-quality DFT. Tessent silicon management solutions include advanced features for debugging, safety and security, and in-life analytics to meet today's evolving silicon lifecycle challenges. Create an infrastructure to make designs more testable. Silicon lifecycle management solutions enable high-quality testing, identify defects and hidden limiters of yield, and go beyond test to system debugging, validation, and validation. This ecosystem of tools analyzes data in order to provide critical insights into the system that can be used for monitoring. Best-in-class DFT, debug and in-life monitoring solutions, combined with powerful data analytics, will ensure the highest test quality and accelerate yield ramp. They will also improve safety, security and reliability throughout the silicon lifecycle. Reduce time to yield, manage production excursions, and recover the yield caused by systematic defects.

PowerPro offers the most comprehensive set of features to RTL designers to "design-for-low-power". It offers power estimations for both RTL- and Gate-level designs. Early power checks are available to quickly identify power issues during RTL design development. Clock and memory gating is also offered to optimize the design. PowerPro offers the most comprehensive set of features to RTL designers to "design-for-low-power". It provides power analysis for RTL and gate level designs, early power checking to quickly identify power issues during RTL design, and clock and Memory gating for optimizing the design for power. PowerPro provides highly accurate estimations within 10% of the signoff. This technology is based on advanced engines which enable a wide range of analysis capabilities. PowerPro's automatic optimization produces low-power RTL with integrated logic equivalence checks. PowerPro's automatic power optimization is the only low-power RTL technology on the market that has been proven.

PrimeSim HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

Revit Building Information Modelling software allows engineers, designers, and contractors from all disciplines to model to a high degree of detail and coordinate with other building project contributors. Revit streamlines the engineering design process. To improve communication of design intent before construction begins, use a single model. Simulate and detect interference earlier in the design process. For engineering-driven calculations, use conceptual energy analysis data. In the context of a complete building information model that includes structural and architectural components, design, model, and document building systems. With tools that automate the layout of the fabrication model, you can create a model for MEP fabrication. Prepare a model to coordinate fabrication and installation. Revit allows team to improve accuracy and speed delivery.

NVIDIA Modulus, a neural network framework, combines the power of Physics in the form of governing partial differential equations (PDEs), with data to create high-fidelity surrogate models with near real-time latency. NVIDIA Modulus is a tool that can help you solve complex, nonlinear, multiphysics problems using AI. This tool provides the foundation for building physics machine learning surrogate models that combine physics and data. This framework can be applied to many domains and uses, including engineering simulations and life sciences. It can also be used to solve forward and inverse/data assimilation issues. Parameterized system representation that solves multiple scenarios in near real-time, allowing you to train once offline and infer in real-time repeatedly.

form*Z pro is a powerful 3D modeling application that offers a variety of modeling personalities, tools, and an intuitive interface to help you express and communicate your ideas. It uses advanced 3D solid modeling and surface modeling techniques to ensure accurate representations of your designs as you move through visualization, layout, animation, and fabrication. Object Symmetry creates a plane that is symmetrical for an object. The object's symmetry can be maintained by adjusting the sids of each model to match. Special consideration is given to NURBs curves and NURB surfaces, as well as Sub-D objects. Referencing files are data from one project that is displayed in another project. Reference files allow complex static data to be stored in external files. They also support collaboration where files can be shared among team members as the design changes. Python is an easy-to-use but powerful scripting language.

OnScale is the original Cloud Engineering Simulation platform. It combines multiphysics solver technology and the unlimited compute power of cloud supercomputers to create a powerful platform for Cloud Engineering Simulation. OnScale allows engineers to run large numbers of full 3D multiphysics simulaions simultaneously. This allows them to create digital prototypes of high-tech devices. These digital representations can be used to capture the entire behavior of the device within its operating envelope. OnScale Solve is a cloud-based engineering simulation that provides a powerful, easy-to-use, and effective experience. OnScale Solve can run on both public and private cloud supercomputers. It includes a web-based UI, API to integrate into any design workflow, scripting language to customize engineering simulations and plugins to improve its modeling capabilities. OnScale Solve provides engineers with the ability to simulate data and train advanced AI/ML algorithms.

Pointcarre is a disruptive software that allows you to create and develop fabrics. It is modular, fast, and easy to use. You can create yarn-dyed, jacquard and knit fabrics. This is an additional gear for your fabrics. It offers creatives the opportunity to finally be able work in a setting that provides effective tools for technical and graphic processing of fabrics. With digital samples that are true to life, commercials can anticipate the market and surprise customers. With just a few clicks, you can create variations by combining the motifs in a ratio.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

Synopsys CODE V is an optical design software which allows engineers to model, analyse, optimize and support the fabrication imaging optical systems. It has advanced capabilities for designing optical components including freeform surfaces. It also offers tools such as global optimization for global optimization, intelligent glass selection and beam synthesis propagation to accurately analyze diffraction. CODE V's robust tolerance features reduce manufacturing costs by compensating and predicting potential fabrication and assembly mistakes. The software is also interoperable with other Synopsys products, such as LightTools for the design of comprehensive optical and illumination systems. Comprehensive graphics capabilities, including 3D visualizations, data plots and shaded displays.

iTwin Capture Modeler, a desktop application by Bentley Systems designed to create engineering ready reality data for infrastructure project, is a comprehensive application. It allows users to create multiresolution 3D model, such as reality models, point clouds and orthophotos from simple photos or LiDAR point cloud, providing precise digital context in design, construction and operations workflows. The software is able to handle projects of all sizes, from small objects up to entire cities. It also offers advanced features such as masks, water restrictions, and retouching to enhance reality data. iTwin Capture Modeler comes in two versions: the standard edition, and iTwin Capture Modeler Center. The latter allows unlimited clustering for large-scale projects. The application supports a wide range GIS formats and allows seamless integration with various workflows.

The TRIADEM StylePlugs, which are textile design plugins for Adobe Photoshop, are available. They allow you to use the powerful tools of Photoshop to create fabric designs. These plug-ins are ideal for textile and fashion designers who use standard graphics software to create their designs. There are plug-ins available for repeat design, color, coloring, and fabric simulation. Adobe Photoshop has a variety of plug-ins for fashion and textile design. The Weaver plugin allows you to create high-quality dobby weaving designs, such as checks and stripes. You can access the collection color list to select the right yarn colors. Repeater allows you create repeats, all overs, and other types of repeats. You can also define them as you like, scaling, rotating, and mirroring each pattern in the repeat. Textildesign Plugin allows you to create, print, and edit colorlists.

ProModel is an event simulation and predictive analytics software that can help you make the best decisions. ProModel AI simulation software can accelerate your system's performance and reduce risk. We offer data-driven solutions for industries that require precise forecasting and planning to ensure operations run smoothly and efficiently. You need to know what changes in your operations will mean for production and scheduling today and tomorrow. Our AI simulation products enable organizations to design, simulating and optimizing factory layouts using a digital twin. They can also forecast patient census and bed capacities, uncover and prevent operational bottlenecks, optimize capacity planning and schedules, while streamlining production flow. Use dynamic simulation models to improve process management. Visual insights can be used to identify bottlenecks.

SEDDI Textura will help you master the art of tiling. Our easy-to use suite of tiling software empowers anyone to create the perfect pattern, repeat it and see it come alive in real-time. Save time by reducing the need to switch between software. SEDDI Textura’s neural network was trained using high-quality mechanical data and optical data from thousands fabrics, and tested with the best-in class methodology. SEDDI Textura AI can simulate the behavior of textiles with a simple scan and a few data points such as composition and weight. With ease, unleash your creativity. The material editor in SEDDI Textura makes it easy to experiment with colors and fabric finishes like metallics and satins. Export digital fabrics to the format you prefer, whether it's ZIP, U3MA or SBSAR. Create, edit and manage digital textiles on one platform.

Honeywell's UniSim® Design Suite is an intuitive and comprehensive process simulation and modeling software that enables engineers to create both steady-state and dynamic models for plant design, performance monitoring, troubleshooting, and optimization. It offers a user-friendly interface for developing process flowsheets, comprehensive thermodynamic and unit operation models, and features that support sustainability targets, such as carbon capture and storage (CCS) and green hydrogen production. The suite is designed for multiple process simulation needs, including process design, optimization, asset monitoring, troubleshooting, and debottlenecking, with powerful steady-state and dynamic modeling built into the same flowsheet. By leveraging UniSim models as digital twins, users can monitor plant performance and equipment reliability, optimize designs to meet operational and business objectives, and accurately predict the impact of feed changes, upsets, and alternate operations on safety, production, and profitability.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

GoldSim is the best Monte Carlo simulation software for dynamically modeling complex systems in engineering and science. GoldSim supports decision making and risk analysis by simulating future performances and quantitatively representing the uncertainty inherent in complex systems. GoldSim simulation software is used by organizations around the world to compare and evaluate alternative plans, designs, and policies to make better decisions in uncertain times. Many components are interrelated and poorly characterized in simulating water resources, water supply, and hydrological modeling projects. The hydrological system is driven by stochastic factors (i.e. precipitation, evaporation and demand) and is subject to unpredictable processes, parameters and events.

3DOptix, a cloud-based platform for optical design and simulation, allows users to efficiently design, simulate and refine optical systems. It offers rapid analysis capabilities using cloud and GPU acceleration without the need for any local installations. The platform offers an extensive library of optical and optomechanical components that are available off-the-shelf, allowing for the creation of accurate digital prototypes. The 3D graphical user interface is intuitive and features drag-and drop functionality, real-time visualisation and simplifies the design process. 3DOptix allows for both sequential and nonsequential ray-tracing. This allows for comprehensive modeling of optical systems. It also offers real-time collaborative tools that allow multiple users to work simultaneously on the same project, with easy sharing through cloud links. The platform can be accessed via any web-browser, eliminating the need to install specific hardware or software.

DigitalClone for Additive Manufacturing (DCAM) is a comprehensive suite of metal additive manufacturing simulation and modeling capabilities that allows for seamless design and analysis support. DC-AM uses a multiscale, multi-physics analysis approach to link the process - microstructure and fatigue relationship of additively produced parts to enable computational assessment for quality and performance. DC-AM encourages the adoption of AM in safety-critical sectors by providing unprecedented insight into build conditions and the characteristics and final parts. This allows for a reduction in time and cost, as well as allowing for a reduction in the time and costs required to qualify parts.

ENCY Robot is an offline programming solution (CAD/CAM/OLP). It offers precision toolpath calculations, digital twin creation and advanced kinematics management for a variety of robotic processes including milling and welding, painting, additive manufacture, and pick-and place operations. Highlight: - A complete package that includes design, technology setup and toolpath calculation. - Support robots of any kinematics - Robot Kinematics Optimization for Singularity Avoidance and Collision Free Movements - Digital twin builder with zero-code for robotic cells - High-quality 3D robot models and postprocessors pre-defined by top brands ENCY Robot allows users to safely and effectively design and simulate robotic operations. This increases productivity and reduces manual intervention in complex production environments.

ENCY is a CAD/CAM of a new generation. It combines advanced CAM technologies with an intuitive interface and a natural workflow. It supports multi-axis milling, G-code generation and 2D and 3-dimensional CAD modeling. Core Features - Advanced Toolpath calculation: Customized toolpaths maximize the machine's capabilities and safety - High-Resolution Simulator: Realistic solid-voxel simulations of material removal, collision-checking, additive and painting processes - Seamless Integration with ENCY Clouds and ENCY Tuner Highlights: - Dark theme with a modern interface - A wide range of technological capabilities - Multiaxis Milling and Swiss Turning Additive and hybrid manufacturing - Machine-Aware Technology : toolpath calculations considering the digital twins of the machine Direct toolpath editing - State-of the-art simulation - Postprocessor generator

You can create more accurate estimates for MEP-building system projects through detailing, fabrication, installation. Use Fabrication ESTmep™ software to gain insight into project costs and generate competitive bids.CADmep/ESTmep/CAMduct share common content enabling flexible workflows to produce detailed models for estimation. Import models for cost estimation. Design line allows you to create more competitive bids faster. Manipulate databases for quick cost iterations. Multiple pricing options are available to clients. Visualize job cost and analyze cost by color. Autodesk Fabrication (ESTmep) is a cost estimation tool that allows mechanical, electrical, or plumbing contractors to produce more accurate cost estimates for MEP-building systems projects during the detailing, fabrication, installation workflows. You can choose from thousands of patterns and manufacturer's items, with 54 new imperial ranges.

An analytics-driven, simulation based digital twin is a connected virtual replica of an in service physical asset. It takes the form of an integrated multidomain simulation that simulates the asset's life and experience. Hybrid twins are a way to optimize industrial asset management and system design, optimization, and predictive maintenance. Ansys Twin Builder can help you increase top-line revenue, reduce costs, and maintain a competitive edge. Ansys Twin Maker allows you to quickly create a digital replica of an existing asset. This allows for better lifecycle management and predictive maintenance, which can help you maintain a competitive edge.

Your designs can be tested under real-world conditions to improve product quality and reduce prototyping and testing costs. SOLIDWORKS®, Simulation is a simple-to-use suite of structural analysis tools that uses Finite Element Analysis to predict a product’s real-world physical behavior. This can be done by virtually testing CAD models. The portfolio offers dynamic, static, and linear analysis capabilities. SOLIDWORKS Simulation Professional allows you to optimize your design, determine product mechanical resist, product durability, and test heat transfer instabilities and buckling instabilities. It can also perform multi-physics sequential simulations. SOLIDWORKS Simulator Premium allows you to efficiently evaluate your designs for dynamic response, nonlinear, and composite materials. SOLIDWORKS Simulation Premium offers three advanced studies: Nonlinear Dynamic, Linear Dynamics, and Non-Linear Static.

Ansys Lumerical Multiphysics, a photonics simulation software, allows for the seamless design of components by capturing multiple physics effects such as optical, thermal, electric, and quantum well interactions within a unified environment. This intuitive product design software is tailored for design engineering workflows. It offers a fast experience that facilitates rapid design exploration, and provides detailed insights into the real-world performance of products. It combines accurate high-fidelity simulation with live physics in an easy-to use interface that supports faster time-to market. The key features include a finite-element design environment, integrated workflows for multiphysics, comprehensive material models and capabilities for optimization and automation. Lumerical Multiphysics' solvers and workflows are designed to capture the interaction of physical effects when modeling passive and active photonics components.

Style3D Studio is a 3D fashion designing software that supports GPU and CPU outputs in real time. As fast as you can visualize your designs, you can see the fabric, fit, or silhouette. You can fine-tune the fit of any design with our 3D garments. This is even true for drape-sensitive fabrics like jerseys and lightweight wovens. You can explore any idea or inspiration in the most sustainable way possible with 100% accurate digital samples. We offer software solutions and customized onboarding models for businesses. We offer a customized plan that offers multiple training options to best fit your design needs.

MapleSim can be used to create digital twins for virtual commissioning and system-level models for complex engineering designs projects. It is an advanced modeling tool that allows you to reduce development time, lower costs, diagnose real-world performance issues, and reduce development time. You can eliminate vibrations using better control code and not hardware upgrades. With detailed simulation results, diagnose root-cause performance issues. Validate new designs before they are physically prototyped. MapleSim is an advanced system-level simulation and modeling tool that uses modern techniques to significantly reduce model development time, provide more insight into system behavior and produce high-fidelity simulations.

The Cadence Clarity 3D Solver software is a 3D electromagnetic simulator that can be used to design critical interconnects on PCBs, IC Packages, and Systems on IC Designs. Clarity 3D Solver is a 3D electromagnetic simulation software tool that helps designers solve the most complex electromagnetic challenges in designing systems for 5G and automotive applications, high-performance computing and machine learning. Clarity 3D Solver's distributed multiprocessing, an industry-leading technology, provides the 10X speed and virtually unlimited capacity required to address larger and complex structures. It creates highly accurate S parameter models for use in high speed signal integrity, power integration, high frequency RF/microwave and electromagnetic compliance analyses.

In markets where safety of welded assemblies are essential, analysis using TRANSWELD®, offers a global solution to anticipate welding defect. Our simulation software integrates multiple physical models to simulate the actual behavior of the metal when it is in a liquid/mushy condition to perform a comprehensive analysis of the material's evolution. TRANSWELD®, enables the study of the microstructure in the solid-state assembly. You can then ensure the conformity without having to go through the prototyping phase. Our software is 100% predicative. You can observe welding processes numerically using real conditions. You can, for example, visualize the heat source movements during the simulation of laser or arc welding.

Ansys Lumerical FDTD, the gold-standard in modeling nanophotonic devices and processes, is the Ansys Lumerical FDTD. The integrated design environment allows for scripting, advanced post-processing and optimization routines. This finely tuned implementation delivers the best-in-class solver performance across a wide range of applications. The integrated design environment allows you to focus on your design while we take care of the rest. Flexible and customizable models and simulations are possible with a variety of benefits. Ansys Lumerical FDT Models nanophotonic devices, processes, and materials so that you can concentrate on creating. Lumerical FDTD, the gold-standard in modeling nanophotonic devices and processes, is the Lumerical FDTD. This carefully crafted implementation of the FDTD method provides reliable, powerful, and scalable solver performance across a wide range of applications.