Alternatives to Orbital Stack

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Like the other Dlubal Software programs RWIND, the wind simulation program RWIND is simple to use and delivers the desired result reliably. RWIND will ensure that the wind does not blow out of your project's sails. RWIND allows for the analysis of wind flows (digital winds tunnel) around buildings and other objects. RWIND uses a CFD simulation, which simulates the effects of wind on the structures. You can run a wind simulation for simple and complex structures. The result will speak for itself. The wind loads calculated using RWIND can then be imported into RFEM and RSTAB.

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

ENVI-met is a three-dimensional microclimate simulation tool designed for various purposes, including urban development, architectural design, and enhancing energy efficiency, by taking into account all relevant climate factors rather than focusing on just one. This software can model different climate scenarios, encompassing both daytime and nighttime temperatures, humidity levels, wind speeds, and solar radiation in urban areas. Additionally, it allows for the exploration of how various building materials, like glass and stone, impact the microclimate of their surroundings. By predicting how alterations in urban design influence both the microclimate and the thermal comfort of urban dwellers, ENVI-met serves as a vital resource for cities around the globe. Given the significant challenges posed by climate change, developing healthier and more resilient urban environments has become increasingly important. Therefore, ENVI-met is instrumental in evaluating the potential impacts of new constructions, green spaces, and urban planning initiatives, enabling stakeholders to make well-informed decisions that promote sustainability and improve community well-being. This capability underscores the software's relevance in fostering innovative solutions for contemporary urban challenges.

AKL FlowDesigner is an advanced computational fluid dynamics (CFD) software that facilitates wind analysis by allowing users to effortlessly import 3D models of structures or urban blocks created with modeling applications like Autodesk Revit, GRAPHISOFT ARCHICAD, Rhinoceros, and SketchUp. This software supports BIM capabilities in IFC format, making it a valuable tool for architects, designers, engineers, and consultants who can leverage it early in the design phase to comprehend and visualize airflow around their projects. By conducting early analyses, professionals can significantly decrease design time while also making a strong impression on their clients. The CFD simulations offered by AKL FlowDesigner provide substantial advantages in the architecture, engineering, and construction (AEC) sectors. Previously, simulating airflow was a daunting and time-intensive process that necessitated extensive technical expertise; however, with AKL FlowDesigner, users can easily create simulations and analyze airflow within minutes, eliminating the need for an engineering background or intricate calculations. This user-friendly approach opens up the world of CFD to a broader audience, empowering more individuals to enhance their design projects.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

Autodesk CFD is a sophisticated software for computational fluid dynamics that allows engineers and analysts to forecast the behavior of liquids and gases with high accuracy. This tool significantly reduces the reliance on physical prototypes while enhancing understanding of fluid flow performance in various designs. It equips engineers with an extensive suite of robust tools aimed at optimizing system designs, managing thermal issues particularly in electronics cooling, and integrating Building Information Modeling (BIM) to improve occupant comfort in HVAC systems within Architecture, Engineering, and Construction (AEC) and Mechanical, Electrical, and Plumbing (MEP) sectors. Furthermore, the Application Programming Interface (API) and scripting capabilities enhance Autodesk CFD's functionalities, enabling customization and automation of routine tasks through the Decision Center. Additionally, the Decision Center streamlines the process of comparing system designs, thereby accelerating decision-making in design processes. This comprehensive approach not only improves efficiency but also empowers engineers to make more informed decisions in their projects.

Ingrid Cloud is an online tool which automates the entire process for wind simulations. Our computational model requires virtually no human intervention. It is easy to use and accurate. CFD is easy and affordable with us. This unique technology is based upon research at KTH Royal Institute for Technology over the past 15 years.

Spacemaker is a user-friendly, collaborative cloud-based AI platform that allows architects, urban planners, and real estate developers to create exceptional site proposals. With the ability to generate 3D massing models of their projects and the surrounding areas through automated datasets, users can evaluate site designs and obtain precise assessments across more than 100 parameters, including factors like noise, wind, sunlight, and microclimates. This software enhances the early phases of planning and design by providing intuitive tools and generative design capabilities, facilitating thorough feasibility studies and conceptual designs. It includes ready-made datasets and advanced design tools for seamless 2D and 3D drafting while offering real-time calculations of floor areas and analyses related to noise, wind, solar energy, sunlight, and parking configurations. Furthermore, Spacemaker supports import and export functionalities in IFC and OBJ formats, automates area computations, conducts microclimate assessments, visualizes variations between different proposals, and generates apartment layouts, as well as view analyses, making it an essential tool for modern design projects. Overall, its robust features make it invaluable for professionals aiming for innovative and effective designs in their projects.

Wind is a challenging element to understand fully. In city landscapes, its dynamics become increasingly intricate due to interactions with structures, leading to various phenomena such as accelerations (Venturi effect), swirling patterns, descending flows, and disruptions. The constructed environment thus generates a localized climate that frequently results in discomfort for individuals. To foster sustainable architecture and urban design, it is vital to analyze these aerodynamic effects and incorporate them early in the planning stages. This analysis is increasingly sought after by developers in numerous nations. Addressing wind dynamics is essential for the effective creation of outdoor public spaces that enhance user comfort. Furthermore, UrbaWind provides a tool for assessing pedestrian wind comfort by aligning with the comfort standards of different regions, ensuring a more livable urban environment. Ultimately, understanding wind behavior is crucial for improving overall urban quality and enhancing the experience of those who inhabit these spaces.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

The iStruct® application suite serves as a vital resource for the design, specification, and delivery of structural products within the realms of residential and light commercial construction. These applications work together harmoniously, enabling the sharing of essential features such as product availability, pricing, templates, and customer information, which simplifies the process of achieving uniform outcomes with minimal effort. Created with the intent of fostering interdepartmental collaboration, iStruct® enhances your organization’s productivity while optimizing the design workflow, leading to significant gains in efficiency as well as savings in both time and costs. Additionally, the suite provides comprehensive analysis for both gravity and wind loads affecting all components of the wall, ensuring a thorough evaluation of structural integrity. This multifaceted approach ultimately contributes to more reliable and effective construction projects.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

As urbanization continues to expand rapidly across the globe, cities are facing increasing vulnerabilities to climate change. Significant threats to urban development and the well-being of city inhabitants include Urban Heat Islands (UHI), air pollution, and surface water flooding. It is imperative for local governments to implement strategies that address the challenges posed by urban expansion and climate change. GREENPASS serves as a valuable tool for planners, developers, and municipalities, providing guidance for optimal decision-making throughout the various stages of urban planning and development while addressing up to six urban challenges. This innovative platform enables users to visualize, measure, and compare the effects of green infrastructure and other structural interventions on the urban landscape. By offering tailored solutions for every phase of the urban planning process, from initial draft assessments to detailed execution, GREENPASS effectively supports sustainable urban growth. It employs preliminary analyses derived from machine learning database evaluations and standard analyses based on conventional BASIC simulations, ensuring comprehensive insights for planners.

windPRO encompasses a wide range of functionalities, including the analysis of wind data, energy yield calculations, uncertainty quantification, site suitability assessment, and the evaluation and visualization of environmental impacts. Additionally, it is equipped to conduct thorough post-construction analyses of production data, with all features provided in separate modules to suit specific needs. This versatile software can model various wind energy projects, from basic single turbine setups to extensive multi-mast, multi-turbine, and multi-neighbor developments. Users can choose the ideal wind turbine model from an extensive catalog featuring over 1,000 manufacturer-approved options. The efficiency of energy production is significantly influenced by the available wind resources, and windPRO allows users to utilize wind resource maps to identify optimal locations. Furthermore, the advanced OPTIMIZE module simplifies the process of determining the most effective turbine layout, ensuring maximum energy generation efficiency. Through these comprehensive tools, windPRO supports the successful planning and execution of wind energy initiatives.

Altair Activate is utilized to model and simulate a diverse array of products as interconnected systems, facilitating the discovery of improved designs at an accelerated pace. As products across various sectors grow more intricate, electrified, intelligent, and interconnected, the need for advanced simulation tools becomes paramount. By leveraging multi-disciplinary system-level simulation capabilities, designers can develop sophisticated mechatronic systems more holistically, fostering enhanced collaboration and streamlined workflows among product development teams. Altair Activate effectively eliminates barriers between various subsystems, including mechanical, electrical, control, and electronic components, as well as software and hardware-in-the-loop interactions, alongside data analytics. Utilizing 1D modeling and simulation for thermal-fluid system dynamics allows for nearly equivalent accuracy to traditional 3D CFD methods, while significantly reducing timeframes, thereby promoting extensive design exploration and performance optimization more efficiently. This innovative approach not only speeds up the design process but also empowers teams to create more integrated and efficient product solutions.

MecaWind is a specialized software tool designed to compute wind loads and pressures on the main wind force resisting system (MWFRS) of various structures, including buildings, towers, chimneys, tanks, solar panels, and more. It adheres to the ASCE 7 standard, which is the benchmark for design loads in the United States and is published by the American Society of Civil Engineers. The software features multiple iterations of the ASCE 7 standard, as well as the Florida Building Code (FBC), allowing users to access ASCE 7-05, ASCE 7-10, and the most current ASCE 7-16. Each version represents a distinct update to the standard, with ASCE 7-16 being the latest and including numerous revisions compared to ASCE 7-10. While ASCE 7-05 is part of the software's offerings, it is less commonly used in contemporary applications across various jurisdictions. This comprehensive suite enables engineers to ensure compliance with the latest building codes and standards for wind load assessments.

Hektar is an innovative cloud-based software designed for generative design, specifically aimed at assisting with early-stage urban planning, pre-design, and schematic design tasks. Created by Parametric, it empowers architects and urban planners to improve their projects by effectively managing the complexities involved in critical design phases. By leveraging evolutionary algorithms and artificial generative intelligence, the platform transforms user inputs from broad concepts into detailed, viable designs and accurate estimates. Hektar’s suite of tools incorporates both geometrical and geographical intelligence, enabling users to specify essential features like access points, exclusions for construction, and custom street layouts. Furthermore, it offers numerical controls, allowing for precise adjustments related to project elements such as building depth, greenery integration, and parking arrangements. The software begins processing intricate information about lighting and sun exposure early in the geometry pipeline, leading to the creation of informed design proposals that can adapt to various scenarios. In this way, Hektar not only enhances the design process but also fosters collaboration among multiple stakeholders involved in urban development projects.

Utilizing the distinctive and inherently dynamic Lattice Boltzmann-based physics, the PowerFLOW CFD solution conducts simulations that effectively replicate real-world scenarios. With the PowerFLOW suite, engineers can assess product performance at the early stages of design, before any prototypes are constructed—this is when alterations can have the most substantial effects on both design and budget. The PowerFLOW system seamlessly imports intricate model geometries and conducts aerodynamic, aeroacoustic, and thermal management simulations with high accuracy and efficiency. By automating domain discretization and turbulence modeling along with wall treatment, it removes the need for manual volume meshing and boundary layer meshing. Users can confidently execute PowerFLOW simulations using a large number of compute cores on widely utilized High Performance Computing (HPC) platforms, enhancing productivity and reliability in the simulation process. This capability not only accelerates product development timelines but also ensures that potential issues are identified and addressed early in the design phase.

Snaptrude revolutionizes architectural design by enabling collaborative efforts among project teams, which accelerates the building process while enhancing quality. Designers from top global firms utilize Snaptrude to bring projects from initial concept to final construction seamlessly. With real-time model sharing and communication documentation, teams can work together more effectively. Whether the task involves designing a single residence or an entire urban area, intelligent automation and parametric modeling streamline the workflow without compromising creativity. Speed does not equate to a loss in quality or innovation; rather, it promotes sustainable design and cost management through the integration of BIM data. Users benefit from real-time insights generated by automated Bill of Quantities (BoQs), site topography, and daylight simulations, among other features. The platform supports imports from popular software like AutoCAD, SketchUp, Rhino, or Revit and allows direct exports into Revit, maintaining full parametric family data without any risk of data loss. By facilitating collaborative brainstorming sessions, teams can swiftly transform their ideas into comprehensive and accurate BIM models, ensuring that the final architectural product aligns perfectly with client expectations. This capability not only enhances efficiency but also fosters a culture of creativity and innovation in design.

SimWalk's simulation products and services have been successfully utilized by various authorities and consultancies worldwide. Since our inception over ten years ago, we have consistently pushed the limits of innovation by incorporating cutting-edge technology to best assist the transport, aviation, sports, and construction sectors in managing crowds efficiently. Prepare your venue, whether it's a rail station, airport, or stadium, to meet the growing demands of the future. Our offerings facilitate a comprehensive impact analysis of various proposed designs on crowd behavior and safety. The daily operations of public transport and aviation facilities present significant challenges, and we aid in effective facility management through thorough data analysis, simulation, and crowd dynamics planning. In today’s environment, public transport hubs and buildings are increasingly susceptible to a range of threats. Our expertise enables us to assist authorities in enhancing awareness of security concerns while offering practical solutions tailored to their needs. By prioritizing safety and efficiency, we strive to create more secure environments for everyone.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

Simcenter STAR-CCM+ is an advanced multiphysics computational fluid dynamics (CFD) software that enables the simulation of products in conditions that mimic real-life scenarios. This software stands out by incorporating automated design exploration and optimization into the CFD toolkit accessible to engineers. With a unified platform that encompasses CAD, automated meshing, multiphysics CFD capabilities, and advanced postprocessing, it empowers engineers to thoroughly investigate the entire design landscape, facilitating quicker and more informed design choices. By leveraging the insights offered by Simcenter STAR-CCM+, the design process becomes more strategic, ultimately resulting in innovative products that surpass customer expectations. Enhancing a battery's performance across its complete operating spectrum is a complex endeavor that necessitates the concurrent optimization of various parameters. In this context, Simcenter delivers a comprehensive simulation environment tailored for the analysis and design of electrochemical systems, fostering a deeper understanding of their behavior. This holistic approach allows engineers to tackle intricate challenges with confidence and precision.

Enhance engineering processes with the only comprehensive and user-friendly CFD platform designed for multidisciplinary design and optimization. Computational fluid dynamics (CFD) plays a crucial role in multiphysics system analysis, allowing for the simulation of fluid behavior and thermodynamic characteristics through advanced numerical models. Engineers leverage the Cadence Fidelity CFD platform for various design tasks, including propulsion, aerodynamics, hydrodynamics, and combustion, to enhance product efficiency while minimizing the need for costly and time-intensive physical testing. This robust Fidelity CFD platform offers a seamless end-to-end solution tailored for applications across aerospace, automotive, turbomachinery, and marine sectors. With its efficient workflows, massively parallel architecture, and cutting-edge solver technology, the platform delivers remarkable performance and accuracy, significantly boosting engineering productivity in addressing contemporary design challenges. Ultimately, Fidelity stands out by not only simplifying complex processes but also enabling engineers to innovate rapidly and effectively.

ParaView is a versatile, open-source application designed for data analysis and visualization across multiple platforms, allowing users to create visual representations for both qualitative and quantitative data analysis. It features interactive 3D exploration capabilities alongside programmatic data processing through its batch processing functionality. Engineered to manage extremely large datasets, ParaView leverages distributed memory computing resources, making it ideal for use on supercomputers that process terascale data as well as on laptops for smaller datasets. The application is built with a client-server architecture, enabling remote visualization of data while generating level-of-detail models to ensure smooth interactive performance even with extensive data. Its extensible framework is grounded in open standards, promoting customization and integration with existing tools and workflows. ParaView supports a wide array of well-known file formats and boasts over 200 filters and tools for effective data processing and visualization. This extensive feature set allows users to tailor their analysis experiences to meet specific needs and enhances collaboration in data-intensive projects.

When utilized early in the product development process, Inspire enhances the creation, optimization, and examination of innovative and structurally efficient components and assemblies through collaborative efforts. Its award-winning interface for geometry creation and modification can be mastered within just a few hours, all while providing the robust power of Altair solvers. The structural analysis capabilities, validated by NAFEMS, allow for swift and accurate evaluations using Altair® SimSolid®, making it possible to analyze extensive assemblies and intricate parts. Additionally, it offers dynamic motion simulation and load extraction through the trusted multi-body systems analysis of Altair® MotionSolve®. Furthermore, Altair® OptiStruct® sets the industry benchmark for structural efficiency with its topology optimization, facilitating generative design that yields practical and manufacturable geometries. Inspire empowers both simulation analysts and designers to conduct what-if analyses more quickly and easily, fostering an environment of collaboration and innovation. This approach not only enhances productivity but also encourages teams to explore a wider range of design possibilities earlier in the development cycle.

Currently, engineering teams frequently rely on specialized simulation tools from various vendors to assess different design characteristics, which can lead to inefficiencies and higher costs due to the use of multiple software solutions. To address these challenges, SIMULIA offers a comprehensive suite of cohesive analysis products that enable users with varying levels of simulation knowledge and expertise to collaborate effectively while sharing simulation data and approved methodologies without compromising information integrity. The Abaqus Unified FEA product suite provides robust and comprehensive solutions for both standard and advanced engineering challenges, catering to a wide range of industrial applications. In the automotive sector, engineering teams can analyze complete vehicle loads, dynamic vibrations, multibody systems, impact and crash scenarios, nonlinear static situations, thermal interactions, and acoustic-structural relationships, all while utilizing a unified model data structure and integrated solver technology. This seamless integration enhances collaboration and improves the overall efficiency of the engineering process, allowing teams to innovate more rapidly.

MasterSeries stands as the premier suite of integrated software for structural analysis, design, drafting, and detailing in the UK, boasting a user base of over 10,000 across the globe. It offers a leading-edge, multi-material BIM-enabled modeling and design environment, complemented by an array of robust standalone modules, making it the most comprehensive collection of advanced structural engineering software available in one package. This integration allows users to maximize productivity by minimizing the need to switch between various incompatible systems and re-enter the same information repeatedly. Recognizing that every business has unique needs, MasterSeries is designed with a modular approach, ensuring that companies can tailor their software solutions to fit their specific requirements without the burden of purchasing a large, expensive package filled with unnecessary features. By allowing users to select only the modules essential for their operations, MasterSeries empowers businesses to craft a customized software experience that adapts to their evolving needs, thereby enhancing efficiency and effectiveness in their projects. Ultimately, this flexibility not only streamlines workflows but also supports future growth by enabling easy adjustments as business demands change.

MasterSeries PowerPad represents a comprehensive suite for structural analysis and design, making it an excellent choice for engineers seeking extensive design features at a remarkably low cost. By offering scaled-down versions of its primary analysis and design tools, MasterSeries PowerPad ensures that a variety of established programs are accessible for less than one-third of their standard pricing. Central to PowerPad is the robust MasterFrame analysis module, which seamlessly connects with design modules for steel, concrete, composite, and timber, creating a fully integrated, three-dimensional analysis and design workspace. Additionally, the PowerPad (Student Edition) is available for free, providing students access to our commercial PowerPad Plus suite. Unlike mere proformas, PowerPad bundles lightweight versions of true software applications, including straightforward designs for steel, concrete, and timber beams, along with the capability to analyze beams, trusses, plane frames, grillages, and space frames. This extensive functionality supports engineers in executing a wide array of design projects efficiently.

Part of the TotalSim family, bramble is an online platform for CFD simulations. It can be accessed by any web-enabled computer. It speeds up the pre- and post-simulation process, increasing productivity and creating consistency between simulations. The platform includes customised data management tools and analysis tools as well as CFD and because it uses OpenFOAM, there are no subscription or license charges. Bramble Offers 1. Productivity increases 2. Reliable results 3. Customized data management 4. Simulations that are cost-effective 5. A platform that is easy to use 6. Scalable simulations Bramble also rents and sells the hardware required to run CFD simulations.

Evaluate risks, gain insights into markets, and enhance decision-making by utilizing the most advanced and all-encompassing urban, climate, and community resilience data platform available. Examine current conditions and land usage at the parcel level with detailed urban, environmental, and transportation data. Investigate and analyze the intersections of vulnerabilities, consequences, and policy measures at various levels, including state, city, and neighborhood. Assess how climate change and natural disasters affect communities, resources, and infrastructure. Shape future developments with the latest advancements in urban and transportation planning, leveraging detailed parcel, mobility, and environmental data. Propel ESG reporting through impactful, data-driven evaluations of social and environmental consequences. Foster the creation of more resilient and equitable communities by utilizing focused climate, hazard, and urban vulnerability data, ensuring a comprehensive approach to community planning and sustainability. In doing so, communities can better prepare for the challenges posed by climate change and resource scarcity.

Facilitate the planning and examination of urban development by analyzing the complex relationships among land use, transportation systems, economic factors, and environmental considerations. Investigate how various infrastructure decisions and policy implementations impact community results, including access for both motorized and non-motorized transport, housing affordability, levels of greenhouse gas emissions, and the preservation of open spaces and ecologically sensitive areas. Rapidly set up and initiate UrbanSim simulations utilizing the advantages of cloud-based technology. Provide actionable insights that are accessible to users, regardless of their technical proficiency. The UrbanSim block-level template is pre-equipped with employment, household, and socioeconomic data for nearly 400 Metropolitan Planning Organizations throughout the United States, alongside street networks sourced from OpenStreetMap to effectively calculate accessibility metrics. This comprehensive approach ensures that urban planners can make informed decisions that support sustainable growth and community well-being.

Reduce the time spent searching for information and juggling multiple tools by importing your site proposal to access all necessary data sets in one centralized location. Autodesk Forma (previously known as Spacemaker) equips you with the ability to make informed, data-driven decisions from the feasibility stage right through to site acquisition. Embrace a digital workflow from the outset to enhance both the quality and speed of the initial planning phase. Never compromise on your vision! Explore strategies to maximize density and livability without the long wait times typically associated with evaluating the quality of your site. With Autodesk Forma, you can refine your site proposal at any moment and quickly grasp the implications of any modifications. Don’t accept anything less than the best for your creative endeavors. This powerful tool allows you to explore and evaluate a wider range of options for your site than ever before. Furthermore, Autodesk Forma provides a collaborative platform where architects, developers, consultants, and municipalities can work together seamlessly, fostering innovation and efficiency in the planning process. This integration not only streamlines workflows but also encourages better communication among all stakeholders involved.

Experience the simulation of fluid dynamics, thermal transfer, and fluidic forces that are essential for achieving the desired outcomes of your projects. SOLIDWORKS® Flow Simulation is a user-friendly Computational Fluid Dynamics (CFD) tool integrated within SOLIDWORKS 3D CAD, allowing you to swiftly and effortlessly model the behavior of liquids and gases flowing through and around your designs to assess product efficacy and functionality. The SOLIDWORKS® suite is designed for ease of use, promoting a seamless collaboration that enhances your ability to create products in a more efficient and cost-effective manner. Through SOLIDWORKS Flow Simulation, you and your colleagues can replicate fluid movement, heat distribution, and the associated forces critical for your product's triumph. Organizations of varying sizes require cohesive solutions to foster innovation and advance their operations. By employing integrated CFD capabilities, you can effectively evaluate the impacts of fluid dynamics, thermal exchange, and associated forces on your projects, while also enabling the exploration of multiple "what if" scenarios to facilitate rapid design optimization. This approach not only enhances product quality but also accelerates the overall development process.

Graphisoft Archicad – BIM by architects for architects: Design, visualize, document, and deliver projects of all sizes with Archicad’s powerful set of built-in tools and easy-to-use interface that make it the most efficient and intuitive BIM software on the market. With Archicad, you can focus on what you do best: design great buildings.

PlanMan is a cloud-based project management tool tailored for architects and urban planners, offering a robust array of features aimed at optimizing administrative workflows and boosting efficiency. This software allows users to oversee an unlimited number of clients, projects, quotes, and invoices, all securely centralized in one location. With its integrated cloud storage, all project documents are easily accessible, eliminating reliance on traditional shared network drives. Each project includes a dedicated chat room for real-time communication, while client emails are conveniently organized within the respective projects for quick retrieval. Moreover, PlanMan provides a client portal that enables clients to access their inquiries, quotes, projects, documents, and invoices at any hour. Invoice payments can be processed online through seamless integrations with Stripe or GoCardless. The software also facilitates collaboration with co-consultants, the creation of quotes using project templates, and the generation of invoices for both clients and suppliers, ensuring a comprehensive management experience. Additionally, this platform simplifies the workflow for professionals in the field, making project oversight more efficient than ever before.

VU.CITY is revolutionizing urban development by enhancing understanding, fostering collaboration, and building trust to transform ideas into tangible outcomes. With the ability to test concepts rapidly and visualize plans within an accurate, current framework, its features and data empower you to make informed decisions swiftly. Project teams can enhance collaboration, speed up decision-making processes, and effectively communicate the narrative of their proposals to engage stakeholders effectively. By providing a unified approach, VU.CITY enables architects, developers, planning consultants, and local authorities to collectively navigate the future of urban spaces. This collaborative environment allows everyone to contribute to creating an optimal city for all residents. Moreover, VU.CITY facilitates clear and efficient data visualization, organization, and analysis, ensuring that all participants can make quicker and more informed choices. Users can swiftly pinpoint and evaluate potential sites, while VU.CITY’s robust visualization tools and planning data empower you to refine and enhance your design projects successfully. The platform not only aids in planning but also promotes a shared vision for urban development among all stakeholders involved.

In contrast to other CAD and GIS applications, this software was specifically designed with urban planners in mind from its inception, facilitating the creation of 3D models that utilize established building styles and urban forms. CityCAD provides a streamlined and efficient method for drafting urban masterplans in three dimensions. When routes intersect, junctions are formed with straightforward kerb radii automatically. Moreover, if you adjust the positioning of roads, the surrounding urban blocks are resized automatically. This software also includes an array of advanced analytical tools, offering valuable quantitative insights into your masterplan during the initial conceptual design phases. Users can build a personalized library of land use categories and assign these to different building floors. Additionally, you can input estimates for energy consumption, water usage, and waste generation rates (calculated per person, dwelling unit, or area unit), with total figures being computed in real-time as you develop and refine your design. This capability allows for a more responsive and informed planning process, enabling users to make adjustments based on immediate feedback.

Modelur provides architects, urban designers, and planners with a comprehensive set of tools to effortlessly explore various urban massing alternatives directly in their preferred 3D modeling software. This eliminates the tedious task of recalculating areas and other metrics in Excel! By inputting zoning regulations such as maximum Floor Area Ratio (FAR), site coverage, green space requirements, and maximum building height, users can also create tailored land-use categories for improved flexibility and accuracy in their calculations. The urban massing generator allows users to visualize how zoning regulations interact within a given space while enabling them to set constraints on geometric building parameters, making it easy to kick off initial designs or import existing DWG floor plans. Harness the capabilities of parametric modeling and automated data calculations to refine and evolve your design concepts. Forget about the hassle of moving model data to spreadsheets manually; our Excel LiveSync feature ensures that all your model data is updated in real-time across your Excel spreadsheets, streamlining your workflow significantly. Experience a new level of efficiency in urban planning and design with Modelur.

Kombyne™ represents a cutting-edge Software as a Service (SaaS) tool designed for high-performance computing (HPC) workflows, originally tailored for clients in sectors such as defense, automotive, aerospace, and academic research. This platform empowers users to access a diverse array of workflow solutions specifically for HPC computational fluid dynamics (CFD) tasks, encompassing features like on-the-fly extract generation, rendering capabilities, and simulation steering options. Users can benefit from interactive monitoring and control functionalities, all while ensuring minimal disruption to simulations and eliminating reliance on VTK. By employing extract workflows, the necessity for handling large files is significantly reduced, allowing for real-time visualization. The system incorporates an in-transit workflow that utilizes a distinct process to swiftly receive data from the solver code, enabling visualization and analysis without hindering the operation of the running solver. This specialized process, referred to as an endpoint, facilitates the direct output of extracts, cutting planes, or point samples useful for data science, in addition to rendering images. Furthermore, the Endpoint serves as a conduit to widely-used visualization software, enhancing the overall usability and integration of the tool within various workflows. With its versatile features and ease of use, Kombyne™ is set to revolutionize the way HPC tasks are managed and executed across multiple industries.

Simufact Additive is an advanced and adaptable software tool designed for simulating metal-based additive manufacturing techniques. Learn how to effectively utilize Simufact Additive to enhance your metal 3D printing and rapid prototyping efforts. By employing this software, you can greatly minimize the need for numerous test prints. Our objective is to furnish you with a solution that enables the production of additive manufacturing components with consistent dimensional accuracy on the first attempt. The multi-scale approach of Simufact Additive integrates the most effective methods into a singular software solution, ranging from a rapid mechanical technique to an intricate thermal-mechanical coupled transient analysis that offers exceptional precision in simulation results. Users can select the most suitable simulation method according to their specific requirements. Simufact Additive stands out as a specialized software solution focused solely on the simulation of additive manufacturing processes, which is evident in its streamlined operating framework. This focused approach not only enhances usability but also improves overall efficiency in the design and production workflow.

CoTherm is a sophisticated coupling and process automation tool that serves as a liaison between various CAE applications. It simplifies the task of process automation, making it invaluable for conducting sensitivity analyses, executing design of experiments, or managing multiple CAE models within a unified framework. This functionality enhances efficiency in pre-processing, transient thermal analysis, and post-processing tasks. With a licensed version of CoTherm, users receive ready-made templates for frequently encountered coupling and automation challenges. The software also features advanced optimization functions that identify the most suitable input parameters for your design. Any CAE analysis can benefit from its general optimization subprocesses, ensuring improved outcomes. CoTherm employs a mathematically robust approach, incorporating both global and local optimization methods, which alleviates uncertainty and simplifies the design process. It seamlessly integrates with a wide range of popular thermal and CFD codes, and its robust features allow for the coupling of any software that operates via command line or configuration files. This versatility makes CoTherm a vital asset for engineers seeking to enhance their design workflows and optimize their simulation processes.

You can accelerate your ability to scale by analyzing your site in real-time with your design. This allows you to concentrate on what's most important: making a lasting impression on your communities. Quickly view your idea from all angles. Follow your instincts, draw your idea, and Giraffe will do the rest: overlaying data, querying, and automatically calculating your proof-of-concept. Data discovery allows you to view the most current local mapping data for your site. Giraffe can combine maps from any source and treat them as layers. It allows you to sort, group and analyze them. Engage your stakeholders by giving them a 360-degree view of the potential for a site. For increased community engagement, provide viewer access to the plan. This includes context and images. Giraffe allows you to create something you feel confident in and share it when it's ready. You can quickly review plans in a shared space.

Simufact Welding is a versatile product line that delivers extensive capabilities for simulating the elastic-plastic behavior of materials alongside structural welding processes. This software encompasses a variety of welding techniques, enabling users to model and simulate numerous thermal joining methods, including conventional arc and beam welding as well as brazing. Furthermore, it allows for the modeling of heat treatment processes, variations in cooling and unclamping setups, and the mechanical loading of welded structures. It is essential to identify critical distortions related to assembly, bulging, imbalances, and clearances during the simulation process. Users can also explore and enhance clamping tools before making any financial commitments to tool investments. This software aids in determining the most effective welding directions and sequences, ultimately leading to improved welding outcomes and more efficient production processes. Additionally, it supports engineers in refining their designs for optimal performance and reliability.