Alternatives to CCR2004-1G-2XS-PCIe

The RB2011iLS features a desktop metal casing and offers five Ethernet ports alongside five Gigabit Ethernet ports, an SFP cage, and Power over Ethernet capability on port 10, all powered by a 600MHz CPU and equipped with 64MB of RAM running RouterOS Level 4. This innovative product is the first in its line to incorporate an SFP cage, making it an excellent choice for Fiber To The Home (FTTH) setups. With a total of 11 ports, the RB2011iLS includes a Gigabit SFP cage and five Gigabit Ethernet ports that can be interconnected, functioning as an economical fiber-to-copper converter while also providing five additional Fast Ethernet ports. It can be powered via a power jack or through Power over Ethernet, although it's important to note that SFP transceivers must be purchased separately. The RB2011iLS is compatible with any 1.25G SFP transceivers that meet the SFF committee specifications, but it does not support Passive Optical Network (PON) configurations. For optimal performance, it is tested and recommended for use with MikroTik's SFP modules, such as the S-85DLC05D, S-31DLC20D, and S-35/53LC20D, which are not included in the package. Powered by the advanced Atheros 600MHz 74K MIPS network processor, this device is well-suited for a range of networking needs and provides a solid foundation for efficient data transmission.

Similar to other models in the CCR2004 series, this CCR is equipped with the Amazon Annapurna Labs Alpine v2 CPU, which boasts 4x 64-bit ARMv8-A Cortex-A57 cores running at 1.2 GHz, enabling it to operate three times faster than its predecessor models. This router is designed to be a quiet yet powerful solution for your networking needs, allowing you to enjoy the full capabilities of a true CCR without the distracting noise typically associated with such devices. Say goodbye to the annoying hum and buzz in any environment, whether it’s your office, studio, server room, or homelab, while still maintaining high performance levels! Featuring 18 wired ports, this new model includes 16x Gigabit Ethernet ports and two 10G SFP+ cages, along with an RJ-45 console port situated on the front panel for easy access. Each set of 8 Gigabit Ethernet ports connects to distinct Marvell Amethyst family switch-chips, each of which has a dedicated 10 Gbps full-duplex line linked to the CPU. In addition, every SFP+ cage also has its own 10 Gbps full-duplex connection to ensure optimal performance and speed. The hardware is equipped with 4GB of DDR4 RAM and 128MB of NAND storage, providing ample memory and storage for efficient operations. This impressive combination of features makes it an excellent choice for anyone looking to upgrade their networking capabilities.

The RB2011 series, a cost-effective multi-port solution designed primarily for indoor environments, features a 1U rackmount design with five Ethernet and five Gigabit Ethernet ports, a USB interface, and a touchscreen LCD, all powered by a 600MHz CPU and 128MB of RAM running RouterOS L5. This series is available in various configurations and cases, providing a wide range of options for users. RouterOS, the sophisticated routing operating system that has evolved over the past fifteen years, includes a plethora of features such as dynamic routing, hotspot management, firewall capabilities, MPLS, VPN support, advanced quality of service, load balancing, and real-time monitoring. The RouterBOARD 2011UiAS-RM model stands out from the RB2011L series by offering an additional RJ45 serial port and an upgraded memory capacity of 128MB, along with the enhanced RouterOS L5 license and an SFP cage for further connectivity. Additionally, the presence of a touchscreen LCD simplifies the configuration process, making it more user-friendly and efficient for various networking tasks.

The RB2011 series from Desktop Metal is a budget-friendly multi-port device designed for indoor environments, featuring options like 5 Ethernet ports, 5 Gigabit Ethernet ports, USB connectivity, an LCD screen, and Power over Ethernet capability on port 10. Equipped with a 600MHz CPU and 128MB of RAM, it runs on RouterOS L5, which is a comprehensive routing operating system that has been refined over the last fifteen years. RouterOS supports a wide array of functions including dynamic routing, hotspot management, robust firewall protections, MPLS, VPNs, advanced quality of service, load balancing, bonding, and real-time monitoring, making it a versatile choice for various networking needs. The RB2011UiAS-IN variant stands out with its combination of five Gigabit LAN ports and five Fast Ethernet LAN ports, alongside added features such as an RJ45 serial port, USB port, and enhanced memory at 128MB, compared to the 64MB in the RB2011L series. Moreover, it boasts a RouterOS L5 license instead of L4 and includes a user-friendly touchscreen LCD for easier configuration, with an SFP cage also integrated for additional flexibility. This makes the RB2011UiAS-IN a powerful option for both small and medium-sized networks.

Similar to other models within the CCR2004 series, this CCR is equipped with the Annapurna Labs Alpine v2 CPU, which boasts four 64-bit ARMv8-A Cortex-A57 cores, each operating at a speed of 1.7GHz. The standout feature of this router, however, is its ability to outperform all prior CCR models when it comes to single-core performance, a critical factor for demanding tasks that rely heavily on per-connection processing, such as managing queues. In addition to this, it excels in providing the best single-core performance per watt and overall efficiency per watt compared to any other CCR device, making it an environmentally friendly choice that also helps reduce costs. The router is designed with 18 wired ports, consisting of 16 Gigabit Ethernet ports and two 10G SFP+ cages, ensuring ample connectivity options. Furthermore, it includes a full-size USB port and an RJ-45 console port conveniently located on the front panel. True to the CCR design, it comes housed in a sleek 1U rackmount case in a classic white finish. It is equipped with dual redundant power supplies, alleviating concerns about power reliability, and features an active cooling system to maintain optimal operating temperatures. With all these advancements, this router not only sets a new standard in performance but also emphasizes energy efficiency, making it an exceptional choice for both enterprise and home users alike.

The PowerBox Pro is a robust outdoor router featuring five Gigabit Ethernet ports, including four that provide PoE output, housed in a durable weatherproof enclosure. This device is designed for outdoor installations, allowing for secure mounting on towers or various outdoor settings. It is equipped with passive PoE input and offers passive or 802.3af/at PoE output, enabling ports 2-5 to supply power to compatible PoE devices using the same voltage as the unit itself, reducing the need for multiple power adapters and cables. When supplied with an input voltage of 48-57V, it can effectively power devices compatible with 802.3at and af mode B. Additionally, the router includes an SFP port for enhanced optical fiber connectivity. Not only is it compact and cost-effective, but it is also powered by a robust 800MHz CPU that can handle all advanced RouterOS configurations. Furthermore, the operating system comes preinstalled and licensed, eliminating the need for separate purchases and ensuring that the device is ready for immediate use upon setup. With these features, the PowerBox Pro is an ideal choice for those seeking an efficient and reliable networking solution in outdoor environments.

The RB2011 series offers an economical solution with a variety of multi-port options, including a model designed for indoor environments known as the RB2011iL-IN, which features five Gigabit Ethernet ports, five Fast Ethernet ports, a power jack, and the ability to support Power over Ethernet (PoE) on port 10. This basic model is powered by a cutting-edge 600MHz Atheros processor and equipped with 64MB of RAM, running on a Level4 RouterOS license. Notably, port #10 can supply power to other PoE-enabled devices using the same voltage as the unit, with a maximum load capacity of 500mA. The RouterBOARD 2011iL-IN is packaged in a desktop case along with a power supply, and users have the option to purchase a wall mount kit for network closet installations. Additionally, this device comes complete with a preinstalled and licensed operating system, eliminating the need for any separate software acquisition, ensuring that it is ready for immediate deployment. Overall, the RB2011 series is designed to meet diverse networking needs while remaining budget-friendly.

The RB2011 series is a cost-effective multi-port device designed for indoor environments, featuring a 1U rackmount, five Ethernet ports, five Gigabit Ethernet ports, and a PoE output on port 10. With a robust 600MHz CPU and 64MB of RAM, this device runs on RouterOS L4, a versatile operating system that has been enhanced over the past fifteen years. It supports a wide array of functionalities including dynamic routing, hotspot management, firewall protections, MPLS, VPN capabilities, advanced quality of service, load balancing, and real-time monitoring. A standout feature of the RB2011iL-RM model is its integrated power injector on Ethernet port 10, allowing it to supply power to other PoE devices using the same voltage, which simplifies installation by reducing the number of power adapters and cables required. The PoE port can handle a maximum load of 500mA, making it a practical choice for organizations looking to streamline their networking setup. Additionally, the device is available in various casing options, catering to diverse user needs and preferences.

The Total Access 900e Series is engineered to support Ethernet or multi-T1 converged voice and data solutions, providing powerful IP routing, firewall, and VPN capabilities. It includes four T1 interfaces, one Gigabit interface, and two Fast Ethernet interfaces for both LAN and WAN applications, along with various models equipped with user interfaces boasting up to 24 FXS ports for delivering analog voice services. Additionally, these devices can incorporate SBC functionality, allowing for up to 100 simultaneous calls. For example, the Total Access 908e model provides 8 FXS ports through an Amphenol connection, along with four T1/FT1 ports and three Ethernet interfaces (one Gigabit and two Fast) for network connectivity. The part number for this model is 4243908F1. Similarly, the Total Access 916e model features 16 FXS ports via an Amphenol connection, four T1/FT1 ports, and three Ethernet interfaces (one Gigabit and two Fast) for both WAN and LAN access, identified by part number 4243916F1. In summary, the Total Access 900e Series presents versatile options for organizations seeking reliable voice and data convergence solutions.

Our most advanced router has been upgraded significantly - the enhanced CCR1036-8G-2S+ now features two SFP+ ports for 10G interface compatibility (with the SFP+ module sold separately). It is powered by the same 36-core Tilera CPU found in our previous CCR1036 model, ensuring it offers identical high performance. This device is designed in a 1U rackmount chassis and includes eight Gigabit Ethernet ports, a serial console port, and the newly incorporated dual SFP+ ports. Additionally, the CCR1036-8G-2S+ boasts 4GB of onboard RAM, an M.2 PCIe 4x slot, a full-size USB slot, and a dual power supply for enhanced reliability! Overall, this router is positioned to meet the demands of high-speed networking with improved features.

The RB3011 is a compact 1U rackmount device featuring ten Gigabit Ethernet ports, SFP support, a USB 3.0 port, and PoE output on port 10, powered by dual 1.4GHz CPUs and equipped with 1GB of RAM, running RouterOS Level 5. This innovative device marks the introduction of an ARM architecture CPU, offering enhanced performance compared to previous models. It comes with two groups of Gigabit ports and an SFP cage, as well as a full-size USB 3.0 port that can be utilized for connecting storage devices or external 3G/4G modems. The RB3011UiAS-RM model is housed in a 1U rackmount enclosure, featuring a touchscreen LCD panel, a serial console port, and the ability to provide PoE output on its final Ethernet port. With the operating system already installed and licensed, users can start using the device immediately without any additional purchases. Additionally, the product promises free software updates for its lifespan or at least five years post-purchase, ensuring users benefit from ongoing improvements and features. Overall, the RB3011 stands out as a versatile and powerful network solution for various applications.

The hEX is a compact router featuring five Gigabit Ethernet ports, designed for environments where wireless access is unnecessary. It is powered by a robust dual-core CPU operating at 880MHz and is equipped with 256MB of RAM, enabling it to handle complex configurations supported by RouterOS. This updated model includes a full-size USB port and a microSD slot, which enhances read/write speeds for file storage and supports the Dude server package. It offers impressive IPsec hardware encryption capabilities of up to 470 Mbps. Priced affordably, the device is user-friendly and comes with a pre-installed and licensed operating system, eliminating the need for a separate purchase. Users will benefit from free software updates for the entire lifespan of the product, which is guaranteed for a minimum of five years from the purchase date, ensuring long-term usability. This makes the hEX a reliable choice for users seeking a cost-effective and powerful routing solution.

Embark on your journey to 100 Gigabits with our latest flagship offering: the Cloud Core Router 2216! Equipped with a robust 16-core CPU, it competes head-to-head with the impressive 72-core Tile CPU found in our former flagship, the CCR1072. Yet, it is the outstanding Marvell Prestera Aldrin2 switch-chip that elevates this device through its L3 Hardware Offloading capabilities! Whereas the previous CCR2116 utilized a switch-chip with four 10G CPU connection lines, this new model boasts four 25G lines, significantly enhancing performance. The Cloud Core Router 2216 features two QSFP28 cages for ultra-fast 100 Gigabit connections, alongside 12 SFP28 cages designed for 25 Gigabit networking, plus a Gigabit Ethernet port for added versatility. It is powered by 16 GB of RAM and includes ample NAND storage, complemented by two M.2 SATA slots for further storage expansion. The design also incorporates four hot-swappable fans and dual-redundant hot-swap power supplies to ensure reliability. Notably, if you have experience with our CCR1072, you'll recognize the power supplies and SFP modules, as they remain compatible for continued use. This seamless upgrade path allows for a smooth transition to the latest technology while maintaining familiarity with existing equipment.

We have significantly enhanced performance based on your insights from the MikroTik User Meetings to develop an ideal home lab router that's not only compact and powerful but also offers various power options and efficient cooling. The RB5009 stands out with its impressive features, including 9 wired ports and a full-sized USB 3.0 port. Among these ports, seven are Gigabit Ethernet, one is 2.5 Gigabit Ethernet, and the last is a 10G SFP+ cage, all linked to a robust Marvell Amethyst family switch-chip that operates on a 10 Gbps full-duplex line connecting to the Marvell Armada Quad-core ARMv8 CPU running at 1.4 GHz. Both the CPU and the switch-chip are centrally positioned on the board's underside, allowing the case to function effectively as a large heat-sink. Each board is equipped with 1GB of DDR4 RAM and 1GB of NAND storage, making it a versatile choice. This strategic combination of ports and components offers nearly double the performance relative to similar products in our lineup, particularly in scenarios involving heavy CPU usage. Furthermore, users can expect a seamless experience with enhanced reliability and performance tailored for demanding home lab environments.

The CCR1016-12G is a high-performance industrial router featuring a state-of-the-art 16-core CPU, making it an ideal solution for handling millions of packets per second efficiently. This router includes 12 Gigabit Ethernet ports and a vibrant color touchscreen LCD for easy navigation. It arrives preloaded with RouterOS, ensuring immediate usability upon setup. Compatible with RouterOS versions 6.46 and later, users are advised to upgrade if their device comes with an older version installed. The default IP address for Ethernet port 1 is 192.168.88.1, and the login credentials are set to username: admin with no password, although some models may have user and wireless passwords indicated on a sticker. Additionally, this router is built for scalability, catering to both current demands and future networking needs.

The NetVanta 6250 Series is engineered to provide integrated voice and data solutions, encompassing both legacy T1 connections and Ethernet services. It employs SIP or MGCP protocols for VoIP functions, ensuring compatibility with top-tier soft switches, servers, and gateways. These units serve as gateways that transform IP signaling from the carrier into conventional TDM analog and digital voice services efficiently. This capability allows the NetVanta 6250 Series to deliver voice services concurrently to both IP telephones and traditional telephony systems. Each device in the NetVanta 6250 lineup features a Gigabit combo port suitable for either copper or fiber connections, four Fast Ethernet ports for WAN or LAN connectivity, a USB port for wireless backup or storage solutions, and four T1 ports tailored for legacy PBX systems. Moreover, users can enhance functionality through additional software upgrades that introduce SBC features, VPN capabilities, and voice quality monitoring (VQM), along with a user-friendly graphical interface that visualizes data related to the mean opinion score (MOS). The versatility and upgrade potential of the NetVanta 6250 Series make it a robust choice for modern communication needs.

In industrial environments where dependability, adaptability, and secure systems are paramount, Belden’s routers provide an integrated solution that combines both performance and security in a single unit. Designed to meet IEC 61850 standards, these routers are particularly suited for extensive substation projects or comparable scenarios that demand durability, high performance, robust security, quality of service, and support for various protocols. They feature advanced routing and security functionalities, along with the capabilities of Layer 3 switching and WAN routing. Furthermore, these routers are expandable and modular, offering gigabit ports with options for 4 to 10-port GbE LAN configurations in customizable slots. They also facilitate integration with legacy systems by supporting T1E1 and DDS interfaces, as well as non-Ethernet communication, ensuring versatility in diverse operational contexts. This adaptability makes them an excellent choice for businesses looking to enhance their network infrastructure.

The Total Access 900 Series is engineered to support both Ethernet and multi-T1 applications, featuring four T1 interfaces, a Gigabit interface, and two Fast Ethernet interfaces for connections to either LAN or WAN environments, along with multiple platforms that provide varying user interfaces, accommodating up to 24 FXS ports for analog voice communication. Additionally, these devices can incorporate SBC functionality, facilitating up to 100 simultaneous calls. Specifically, the Total Access 908 model is equipped with a single T1 network interface and 8 FXS user interfaces, providing analog voice delivery, along with an integrated DSX-1 port for PBX connections (T1 CAS or PRI), and a Gigabit Ethernet interface for WAN or LAN connectivity, identified by part number 4213908F1. Meanwhile, the Total Access 916 model boasts a similar single T1 network interface, but offers 16 FXS user interfaces for analog voice delivery, also including an integrated DSX-1 port for PBX connectivity (T1 CAS or PRI) and a Gigabit Ethernet interface for WAN or LAN, with part number 4213916F1. Furthermore, the series concludes with the Total Access 908, which provides a single T1 network interface along with 24 FXS user interfaces designed specifically for analog voice delivery, ensuring robust communication solutions.

The hEX lite is a compact five-port Ethernet router housed in an attractive plastic casing, featuring a powerful 850MHz CPU and 64MB of RAM, making it the most economical option for an MPLS router on the market. Priced lower than the RouterOS license alone, this router is ideal for managing a wired home network, as the RB750r2 (hEX lite) encompasses everything you need. With its affordability, sleek design, and user-friendly interface, it stands out as a remarkable choice for both price and functionality. Its compact structure and stylish appearance make it a perfect fit for any small office or home office setting. The package includes the hEX lite router, a power supply, and comes with a preinstalled and licensed operating system, ensuring no additional purchases are required for setup. Additionally, users benefit from free software updates for the lifetime of the device, guaranteeing at least five years of support commencing from the purchase date. This makes the hEX lite not just a router, but a reliable long-term investment for your networking needs.

The RB4011 series features incredibly robust routers that come with ten Gigabit ports, an SFP+ 10Gbps interface, and built-in IPsec hardware acceleration, all offered at an attractive price point. This model is powered by a quad-core Cortex A15 CPU, which is the same high-performance processor used in our carrier-grade RB1100AHx4 router. With 1GB of RAM, it is capable of providing PoE output through port #10 and is housed in a sleek, professional matte black metal enclosure. Additionally, the RB4011iGS+RM variant, which is designed for Ethernet use, includes two sturdy rackmount ears to ensure easy installation in a standard 1U rack space, making it a versatile choice for various networking needs. Its combination of power and aesthetics makes it an ideal option for both home and business environments.

We aimed to explore the extensive capabilities of the time-tested 10G networking when paired with a cutting-edge CPU. The CCR2116-12G-4S+ empowers users to bypass any CPU constraints in their configurations. Similar to its impressive sibling, the CCR2004, this router is equipped with the formidable Amazon Annapurna Labs Alpine CPU. However, with its 16 cores clocked at 2 GHz, the CCR2116-12G-4S+ significantly outperforms the CCR2004. For instance, we observe a minimum of a 15% boost in single-core performance, which is crucial for demanding tasks that rely on per-connection processing, such as managing queues. This router establishes a new benchmark for single-core performance within the entire CCR lineup! Additionally, it features Layer 3 Hardware Offloading support. Naturally, to tap into this immense power, the right connectivity is essential. The device includes four 10G SFP+ ports, each linked to a dedicated, full-duplex line that connects to the Marvell Aldrin family switch chip. Furthermore, it boasts 12 Gigabit Ethernet ports, all managed through the Marvell chip, enhancing its connectivity options. Overall, the CCR2116-12G-4S+ not only showcases exceptional processing capabilities but also provides robust connectivity features.

Introducing our latest flagship router, the CCR1072, which is driven by a powerful Tilera 72-core CPU, with each core operating at a speed of 1GHz. To harness this impressive processing capability, the CCR1072 features eight 10G SFP+ ports, each connected independently, along with a dedicated Ethernet port for management functions. Alongside these features, the device is pre-installed with RouterOS L6 and includes 16GB of built-in ECC RAM, a vibrant touchscreen color LCD, and two hot-swappable power supplies to ensure redundancy. Additionally, it offers a smart card slot, microUSB, a standard USB port, microSD, and two M.2 slots for expanded storage options. Thanks to its innovative 72-core architecture and direct port connections, the CCR1072 can achieve a remarkable throughput of over 120 million packets per second, making it an exceptional choice for high-performance networking needs. This router is designed to meet the demands of modern applications, ensuring optimal performance and reliability for users.

The hEX PoE lite is a compact five-port Ethernet router housed in a plastic casing, featuring a USB 2.0 port and PoE output, along with a 650MHz CPU and 64MB RAM while running RouterOS L4. This device allows ports 2-5 to supply power to other PoE-compatible devices at the same voltage as the unit itself, reducing the clutter of power adapters and cables significantly. Each port can deliver a maximum current of 1A, and the Ethernet ports are designed with shielding for enhanced reliability. Its affordability and user-friendly nature make it an attractive option for small office/home office (SOHO) setups, seamlessly integrating into various environments with its sleek and compact design. The hEX PoE lite comes with a preinstalled and licensed operating system, eliminating the need for a separate purchase, ensuring it is ready for immediate use upon acquisition. Additionally, the device includes complimentary software updates throughout its lifespan or for a minimum of five years from the purchase date, offering ongoing support. By providing PoE power through its Ethernet ports, this router eliminates the need for extra PoE injectors, streamlining the setup of network devices. With its versatile features and ease of use, the hEX PoE lite stands out as a practical solution for users seeking efficient networking capabilities.

This latest iteration of the RB5009 retains all the impressive features of its predecessor, including Gigabit Ethernet, 2.5 Gigabit Ethernet, and a 10 Gigabit SFP+ slot for fiber connections. It delivers exceptional speed, robust performance, and long-lasting durability. Notably, all eight Ethernet ports now support both PoE-in and PoE-out, enhancing versatility. Alongside the 2-pin connector and the DC jack, users benefit from ten distinct power options. While dual redundant power supplies typically enhance uninterrupted uptime, the RB5009UPr+S+IN takes this capability to new heights! It accommodates a wide voltage spectrum of 24 – 57 V across all power methods; however, mixing different voltages is not permitted. When utilizing PoE-out to power additional devices, the system intelligently selects the highest voltage source—either the DC jack or the 2-pin connector—to ensure optimal functionality. This thoughtful design provides an excellent solution for diverse networking needs.

The NetVanta 4000 Series is perfectly suited for carrier bundled service solutions reaching speeds of up to 1 Gbit/s, as well as providing enterprise-level internet access that ensures secure and rapid connectivity for businesses. Various models in this series come equipped with features such as power over Ethernet (PoE) integrated into the built-in switch, VPN capabilities, and specialized voice monitoring services. Additionally, every NetVanta 4000 unit is capable of functioning as an eSBC, offering a comprehensive application platform directly at the customer's location. Moreover, these devices can scale through software enhancements as your VoIP requirements increase, accommodating up to 1,000 concurrent calls. The NetVanta 4148 model specifically includes four routed, autosensing Gigabit interfaces, with the option of connecting two via fiber, alongside an 8-port Gigabit Ethernet switch. These Gigabit interfaces are versatile, allowing for both LAN and WAN configurations, and provide Ethernet redundancy with instant failover in case one link experiences an outage. The model number for this unit is 17004148F1, and when upgraded with the enhanced feature pack, the NetVanta 4148 can efficiently handle up to 500 VPN tunnels, making it a robust choice for organizations needing reliable and scalable networking solutions.

The Cisco ASR 1000 Series Aggregation Services Routers serve as a robust Software Defined WAN platform, consolidating various WAN connections and network services such as encryption and traffic management, enabling them to operate at line speeds that range from 2.5 to 200 Gbps. These routers are designed with both hardware and software redundancy, embodying a high-availability architecture that stands out in the industry. The newest offerings in the Cisco ASR 1000 Series include the Cisco ASR 1002-HX Router and the Cisco ASR 1001-HX Router, which are capable of supporting speeds up to 100 Gbps in a compact 2-Rack-Unit (2RU) format and 60 Gbps in a 1-Rack-Unit (1RU) configuration, respectively. The ASR 1002-HX model features eight built-in 10 Gigabit Ethernet (GE) ports along with eight 1 GE ports, and it also includes an Ethernet Port Adapter (EPA) slot for future enhancements. Meanwhile, the ASR 1001-HX comes equipped with four built-in 10 GE ports, eight 1 GE ports, and four additional configurable ports that can operate as either 10 GE or 1 GE. Furthermore, the Cisco ASR 1000 Series has been enhanced with the introduction of the Route Processor 3, which represents the latest advancement in modular control plane engines within the series, ensuring optimal performance and reliability. This continuous evolution underlines Cisco's commitment to providing cutting-edge networking solutions that meet the demands of modern enterprises.

Introducing the RB1100AHx4, a router equipped with 13 Gigabit Ethernet ports and powered by the Annapurna Alpine AL21400 CPU, which features four Cortex A15 cores running at 1.4GHz each, enabling an impressive maximum throughput of 7.5Gbit. This device boasts support for IPsec hardware acceleration, achieving speeds of up to 2.2Gbps with AES128 encryption. Housed in a 1U rackmount case, it includes an RS232 serial port and dual redundant power supplies, compatible with -48v DC telecom power as well as 802.3at/af standards. There are two models available, with the RB1100AHx4 Dude edition offering multiple high-speed storage options, including two SATA and two M.2 connectors, ideal for running a Dude database, proxy cache, or other demanding storage applications. Pre-installed with a 60 GB M.2 drive, the Dude edition is specifically designed for users who require enhanced storage capabilities. This router is a robust solution for businesses seeking high-performance networking.

The newly launched Fiber Box Plus can be viewed from two distinct perspectives. Firstly, it represents a significant enhancement over its predecessors, incorporating a cutting-edge ARM CPU, increased RAM, and four 10-Gigabit SFP+ ports, which ensures fast and reliable connectivity without the constraints typically associated with Ethernet, all while remaining budget-friendly. Additionally, it includes a Gigabit Ethernet port for management tasks or PoE-in power supply, along with a 2-pin terminal and standard DC jack, giving users three versatile power options. Supporting a broad input voltage range of 24-57V, this device stands out for its remarkable efficiency, consuming only 7W of maximum power without any attachments. On the flip side, the Fiber Box Plus can also be viewed as an economical alternative to the high-performance netFiber 9, providing substantial savings for users who do not require the extra Gigabit SFP ports. Moreover, it boasts the same exceptional Marvell 98DX226S switch-chip, ensuring that performance remains uncompromised. This makes the Fiber Box Plus an attractive option for both budget-conscious consumers and those seeking reliable technological advancements.

The HUAWEI WiFi AX2 features both 5 GHz and 2.4 GHz bands that function concurrently, automatically transitioning devices between the two bands to guarantee an optimal connection at all times. The 5 GHz band is perfect for activities requiring high-speed internet, such as gaming and streaming, while the 2.4 GHz band excels in providing wider coverage throughout your space. You can seamlessly connect multiple HUAWEI routers under a unified Wi-Fi name, allowing automatic switching as you move throughout your home. The AX2 includes three Gigabit Ethernet ports that support WAN/LAN auto-adaptation, eliminating the need to differentiate between them and simplifying broadband setup. Additionally, it offers the ability to check the Wi-Fi coverage map, view the overall network status, and troubleshoot issues efficiently using suggested solutions. With just a few taps on your smartphone, you can manage your router, connect devices, and oversee your online activities, ensuring a smooth and hassle-free internet experience while enjoying the convenience of modern technology.

The RB1100AHx4 Dude Edition is powered by the Annapurna Alpine AL21400 CPU, which boasts four Cortex A15 cores operating at a frequency of 1.4GHz each, achieving a remarkable maximum throughput of 7.5Gbps. Notably, this device offers enhanced IPsec hardware acceleration, surpassing the performance of previous RouterBOARD models by reaching speeds of up to 2.2Gbps with AES128 encryption. Enclosed in a 1U rackmount chassis, it features 13 Gigabit Ethernet ports, an RS232 serial port, and dual redundant power supplies, ensuring reliability with support for -48v DC telecom power as well as 802.3at/af standards. Additionally, the RB1100AHx4 Dude Edition is equipped with multiple high-speed storage interfaces, including two SATA and two M.2 connectors, making it ideal for running a Dude database, a proxy cache, or any other demanding storage applications, and comes with a 60GB M.2 drive pre-installed to facilitate immediate use. This combination of powerful hardware and versatile connectivity options positions the RB1100AHx4 as a leading choice for users requiring high-performance networking solutions.

Regardless of whether you're involved in telecommunications, retail, or the oil and gas sector, the Bold SR is designed to provide the essential functionality and control you require. This compact device enables the connection of over a dozen devices and add-ons, facilitating the delivery of powerful capabilities across your organization. With the Bold SR, you gain comprehensive management through remote out-of-band operations, Secure Access Service Edge, and SD-Branch features. You can minimize capital expenditures while virtualizing your infrastructure, effectively reducing support costs and response times thanks to the remote out-of-band management. Additionally, you can establish autonomous networking to mitigate the risk of downtime. The Bold SR secures your branch networks and offers a wide array of features, including high-density interfaces and robust Ethernet ports, making it adaptable for any deployment scenario. Whether you're providing failover and out-of-band management to your Network Operations Center or managing functions at distant network edges, the Bold SR serves as your all-in-one networking solution. Moreover, you have the flexibility to virtualize your stack with a selection of SD-WAN, firewall, IoT, and other applications, ensuring that your networking needs are thoroughly met. Its versatility makes the Bold SR an asset that can evolve with your business requirements.

The NetVanta 3000 Series of fixed-port access routers is ideally suited for bundled services from carriers and providing enterprises with secure, high-speed internet access for robust corporate connectivity. This series includes two separate models, the NetVanta 3140 and 3148, each designed to meet varying performance needs. The NetVanta 3140 is compact yet powerful, delivering routing performance of 100Mbit/s. In contrast, the NetVanta 3148 takes it a step further by supporting routing speeds of up to 500Mbit/s and featuring an additional Gigabit Ethernet interface, with two of these capable of fiber connections. Additionally, this model includes an 8-port Ethernet switch that can be configured to support Power over Ethernet (PoE). The NetVanta 3140 Series provides two different form factors: a lightweight plastic desktop design and a durable metal enclosure suitable for rack mounting. Both models come equipped with three routed GbE interfaces and a USB port for connecting to various mobile networks, ensuring flexibility for 3G, 4G, or 5G access while maintaining their 100Mbit/s routing capabilities. Furthermore, optional upgrades for VPN connectivity and specialized voice monitoring services enhance their functionality, making them versatile solutions for diverse networking needs.

The Cisco ENCS serves as a hybrid solution that integrates the capabilities of both a conventional router and a server while maintaining a compact infrastructure footprint. You can launch network services in just a matter of minutes. With the Cisco Enterprise Network Compute System, it is possible to virtualize all branch services, including routers. The ENCS 5000 offers the necessary agility and service density required for branches with limited IT resources. Designed specifically for this purpose, the 5000 Series is an optimized compute platform for running Virtual Network Functions (VNFs). Implementing VNFs streamlines operations and saves valuable time. Additionally, zero-touch automation facilitates swift and error-free deployments and management at branch locations. Cisco's commitment to an open-ecosystem strategy for Network Functions Virtualization (NFV) in the 5000 Series allows for certification of VNFs from other vendors, thus ensuring both compatibility and interoperability across the network. This flexibility enhances the overall efficiency and performance of network services in diverse environments.

The HPE HSR6800 Router Series represents a cutting-edge line of high-performance routers tailored for various applications, including data center interconnection and enterprise WAN core functionalities. Utilizing the Comware operating system, it boasts a sophisticated multi-core, distributed service processing architecture, enabling forwarding capabilities of up to 420 million packets per second and switching capacity that reaches 2 terabits per second. This router excels in providing comprehensive routing, multicast support, Multiprotocol Label Switching (MPLS), and IPv6, along with robust security measures, quality of service features, and high-availability options suitable for carrier-grade environments. It also presents a variety of interface choices, including high-density 10GbE and 1GbE ports. The modular Comware v7 operating system enhances system performance and availability, while feature improvements such as ADVPN, IRF2, EVI, EAA, and ISSU add significant functionality. The introduction of FIP-240 further elevates forwarding performance, effectively doubling that of the FIP-210, and supports up to four HIM/MIM slots. Additionally, line cards are equipped with both 1GbE combo and 10GbE ports, significantly improving IPsec performance. Furthermore, the RT-HIM-2EXP module enhances HIM 10GbE port density and offers compatibility with SFP+ connectors, making this series a versatile choice for modern networking demands.

The latest iteration of the Chateau LTE18 home access point has reached new heights of performance. With the introduction of Generation 6, this model boasts dramatically faster wireless capabilities, a superior CPU, and the addition of a 2.5 Gigabit Ethernet port! Utilizing the advanced Generation 6 802.11ax wireless standard along with Wave 2 technology, the Chateau LTE18 ax achieves remarkable speeds. When compared to its predecessor, users can expect up to a 40% increase in speed on the 5 GHz band and a staggering 90% boost on the 2.4 GHz band! Significant enhancements have been made to its wireless radio and antenna systems. The Chateau LTE18 ax features MIMO 4x4 support on LTE and is equipped with four built-in LTE antennas, plus two optional external network antennas, ensuring comprehensive coverage throughout your home! In response to these impressive speeds, the device now includes four Gigabit Ethernet ports along with the newly added 2.5 Gigabit Ethernet port. Additionally, a USB port offers convenience for storage solutions. Powered by a cutting-edge quad-core CPU operating at 1.8 GHz, paired with a robust GB of RAM, this device is exceptionally capable of managing demanding tasks efficiently. Furthermore, the enhanced technology ensures you can enjoy seamless internet experiences across multiple devices simultaneously.

The mobile internet landscape has reached unprecedented speeds, particularly with the launch of Generation 6 of the Chateau 5G. This latest version boasts remarkably faster wireless capabilities, an enhanced CPU, and the addition of a 2.5 Gigabit Ethernet port! At first glance, the new Chateau closely resembles its predecessors. However, with the implementation of the Generation 6 802.11ax wireless standard and Wave 2 capabilities, the Chateau 5G ax offers exceptional performance. When compared to the earlier generation, users can expect up to a 40% increase in speed on the 5 GHz band, and an astonishing 90% improvement in the 2.4 GHz spectrum! Significant enhancements have been made to the wireless radio and antennas. The Chateau 5G ax features a 4x4 MIMO configuration for both 5G and LTE connections, along with six integrated LTE/5G antennas. Additionally, there are two external antennas that enhance wireless coverage for larger residences while also boosting LTE/5G connectivity. To complement these impressive speeds, the device maintains four Gigabit Ethernet ports and introduces a 2.5 Gigabit Ethernet port for even faster wired connections. Furthermore, the inclusion of a USB port adds versatility for storage solutions. Overall, the Chateau 5G ax sets a new benchmark for mobile internet technology.

The Cisco® 8000 Series routers fulfill a vital role in modern networking. They provide exceptional provider-class routing capabilities with unmatched levels of density, performance, and power efficiency. This versatility allows for the Cisco 8000 Series to be utilized across a broad spectrum of routing applications, all underpinned by a unified ASIC architecture and operating system, which simplifies the processes of qualification, deployment, and ongoing operations. Featuring the innovative Cisco Silicon One™, IOS XR® software, and uniquely designed chassis, the Cisco 8000 Series marks a significant advancement in high-performance routing technology. The series includes a comprehensive variety of feature-rich, highly scalable routers that boast deep-buffered, on-chip High Bandwidth Memory (HBM) and are optimized for 400 Gigabit Ethernet (GbE), with performance capabilities ranging from 10.8 to 25.6 Tbps within a compact 1 RU footprint. Moreover, it also offers a cutting-edge, rack-mountable modular system that achieves an impressive 518.4 Tbps of full-duplex, line-rate forwarding, making it a formidable choice for demanding network environments. As a result, organizations can leverage this technology to enhance their networking efficiency and capacity significantly.

The Cisco® NCS 560 Series Router offers a budget-friendly, modular option that is built on a flexible, protocol-agnostic fabric architecture. As an integral component of the Cisco Evolved Programmable Network (EPN) framework, the Cisco NCS 560 Series Router is designed to provide extensive scalability and exceptional functionalities for Carrier Ethernet business services, utilizing reliable and secure packet-based network technologies such as IP/MPLS, MPLS-TE, SR, SR-TE, and TI-LFA. Customers benefit from a substantial level of flexibility and value thanks to the router's Ethernet interface modules. Each of these interface modules is equipped with a unified core that facilitates time stamping for Y.1731 Operations, Administration, and Maintenance (OAM) delay measurement, ensuring accurate assessments for both one-way and two-way delay metrics. Additionally, they incorporate time-stamping capabilities in accordance with the IEEE 1588-2008 protocol, further enhancing their utility in precise network performance monitoring. This combination of features makes the Cisco NCS 560 Series Router a robust choice for businesses aiming to optimize their network efficiency.

AirLink routers are designed for immediate deployment without the need for additional setup and possess the capability to maintain connectivity effortlessly. The Performance Series caters to users who require top-tier performance for essential applications across challenging indoor environments, vehicles, or outdoor sites. These routers offer an exceptional blend of secure cellular LTE and Wi-Fi capabilities, ensuring high availability and flexibility within a ruggedized structure. Recognized as the industry’s leading 5G router, they are specifically tailored for vehicular use. Additionally, their innovative cartridge-based architecture allows for the incorporation of new functions and features as technology evolves. Equipped with five ethernet ports and dual 4X4 MIMO Wi-Fi 6 capabilities, they also facilitate remote device management and mobility-centric reporting through AirLink Premium. For fixed applications, a single-radio 5G router is available, which can be effortlessly upgraded to a dual-radio model to enhance functionality alongside the cartridge-based design, featuring four ethernet ports and 5x4 MIMO Wi-Fi 6. Furthermore, remote device management is streamlined via AirLink Complete, ensuring users have the tools they need for effective oversight and performance management. This flexibility and scalability make AirLink routers an ideal choice for a wide range of demanding scenarios.

Introducing the newly launched CRS510-8XS-2XQ-IN, a multifunctional 100 Gigabit switch that combines exceptional speed, affordability, and a variety of connectivity options. It features 2x 100 Gigabit QSFP28 ports along with 8x 25 Gigabit SFP28 ports, and is equipped with dual hot-swappable power supplies for added reliability. Remember our impressive 100 Gigabit switches, the CRS504 and CRS518? This latest model is an exciting addition to MikroTik's 100 Gigabit lineup. With its two QSFP28 ports and eight SFP28 ports, it seamlessly integrates into nearly any network configuration or server environment. The CRS510 supports a wide range of connectivity solutions including various direct attach cables, active optical cables, and copper RJ45s, ensuring robust connections throughout your setup. Thanks to its backward compatibility, you can save time, reduce costs, and preserve your sanity while connecting devices of different standards, including 40 Gigabit, 25 Gigabit, 10 Gigabit, and even legacy Gigabit connections. Lastly, we haven’t forgotten about sysadmins: the reliable console port remains a key feature for emergency access and troubleshooting. This combination of features makes the CRS510-8XS-2XQ-IN an essential tool for any modern network administrator.

The 7210 SAS product family delivers the necessary flexibility for deployment, an array of services, and reliability to enhance segment routing, IP/MPLS, and Carrier Ethernet at your network's access points. It encompasses a diverse range of platforms suitable for business VPNs, residential broadband, demarcation, and mobile backhaul, making it a preferred choice across various sectors, including industry, public services, and enterprise applications. Prepare your network for future demands with high-density GE and 10GE interfaces, 100 GE uplinks, and a remarkable throughput of up to 2 Tb/s. By ensuring high availability and quality of service, you can offer competitive services that meet the evolving needs of your customers. As part of the renowned Nokia Service Router product lineup, the 7210 SAS operates on the Service Router Operating System (SR OS) and is overseen by the Nokia Network Services Platform (NSP), providing high-performance service delivery, management, and carrier-SDN integration. Additionally, the 7210 SAS facilitates differentiated services, which include Carrier Ethernet, IP VPN, and an array of enhanced service options to support comprehensive networking solutions. This adaptability ensures that the product remains relevant and effective in meeting the challenges of modern network environments.

Support multiple WAN connection types such as xDSL, Ethernet, 3G/4G LTE, and fiber. The series provides various performance options tailored to your requirements. Enjoy integrated voice, video, wireless, and data capabilities within a single router and switch unit. Designed for small to midsize businesses, this desktop model offers a cost-effective solution. It comes equipped with essential security features like encryption, VPN, firewall, and URL filtering, ensuring the protection of both your customer experience and sensitive data. Management of the 800 Series is straightforward through user-friendly drag-and-click interfaces, whether on-site or via third-party web applications. This versatility makes it an ideal choice for modern business environments.

The hAP ax lite stands out as an ideal compact solution for those looking to reduce expenses without compromising on performance. Featuring our advanced Gen6 AX wireless chip, it maximizes the traditional 2.4 GHz frequency spectrum for impressive results—potentially boosting speeds by up to 90%, depending on your configuration. This makes it especially beneficial for scalable environments such as hotels or growing offices, where its attractive price, small footprint, and comprehensive features facilitate the addition of numerous devices effortlessly. Additionally, consider taking a hAP ax lite along on your next trip; its minimal size makes it easy to pack, helping you escape the limitations of typical guest networks. Our hAP lite series has consistently focused on delivering exceptional value, and the latest model is no exception—with 256 MB of RAM, an efficient ARM CPU operating at 800 MHz, four Gigabit Ethernet ports, and significantly enhanced dual-chain antenna gain of up to 4.3 dBi, all wrapped in a sleek, modern design. The new hAP ax lite truly represents a remarkable advancement in cost-effective networking solutions, ensuring you stay connected wherever you go.

Edge networks are designed to cater to billions of devices, providing low-latency services efficiently. To meet the growing demands for bandwidth, it is essential to utilize feature-rich routers that can scale economically. The ASR 9000 series stands out as an edge routing solution that meets the application performance requirements necessary for 5G services. It incorporates advanced security features such as Secure Boot, Cisco Trust Anchor, and measures to prevent counterfeiting. Furthermore, it follows a Secure Development Lifecycle to guarantee the integrity of its manufacturing process. The ASR 9000 also offers investment protection through ongoing software and hardware advancements. Its custom ASIC is engineered to optimize performance while achieving a hundredfold capacity increase and a remarkable 96% reduction in power consumption per Gbps. Additionally, it supports real-time telemetry, segment routing, and Ethernet Virtual Private Networks (EVPNs), ensuring comprehensive networking capabilities. As connectivity needs evolve, the ASR 9000 series is poised to adapt and lead the way in edge networking solutions.

The HUAWEI WiFi WS5200 allows users to experience incredibly fast dual-band Wi-Fi speeds of up to 1300Mbps (with a maximum of 400 Mbps on 2.4 GHz and 867 Mbps on 5 GHz). It features a Gigabit Ethernet connection to ensure that your internet speed remains swift and reliable. Enjoy online gaming with minimal lag, stream high-definition films seamlessly, and download large files in the blink of an eye. Capable of supporting up to 64 devices, the HUAWEI WiFi WS5200 provides high-speed internet access for your smartphone, tablet, or laptop, making it perfect for families who want to engage in various online activities, from learning to gaming and streaming videos. This router operates on both 5 GHz and 2.4 GHz bands simultaneously, allowing your devices to automatically switch between them for the best possible performance. While the 5 GHz band is ideal for fast-paced gaming and streaming, the 2.4 GHz band ensures broader coverage throughout your home. Additionally, you can manage your entire home Wi-Fi network and easily identify and resolve any connectivity issues that may arise. This comprehensive functionality makes the HUAWEI WiFi WS5200 a great choice for anyone seeking a reliable and efficient wireless network solution.