Alternatives to Ansys Maxwell

Ansys Motor-CAD serves as a specialized tool for the design of electric machines, facilitating rapid multiphysics simulations throughout the entire torque-speed operating range. It allows design engineers to assess various motor configurations and concepts to create designs that maximize performance, efficiency, and compactness. With its four integrated modules—EMag, Therm, Lab, and Mech—Motor-CAD enables quick and iterative multiphysics calculations, significantly reducing the time from initial concept to finalized design. This efficiency in calculations and streamlined data input processes provides users with the opportunity to investigate a broader array of motor topologies and thoroughly evaluate the effects of advanced loss mechanisms in the early phases of electromechanical design. The latest release boasts enhanced capabilities for design optimization, multiphysics analysis, and system modeling tailored specifically for electric motors, ensuring that engineers have the tools they need for cutting-edge development. Ultimately, Motor-CAD's fast multiphysics simulation capabilities across the full torque-speed range empower engineers to innovate and refine electric motor designs with unprecedented efficiency.

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

Simcenter MAGNET serves as an advanced simulation tool for analyzing electromagnetic fields, enabling users to predict the performance of various components such as motors, generators, sensors, transformers, actuators, and solenoids that involve permanent magnets or coils. By facilitating low-frequency electromagnetic field simulations, Simcenter MAGNET offers comprehensive modeling capabilities that accurately represent the underlying physics of electromagnetic devices. Among its features are the modeling of manufacturing processes, temperature-sensitive material properties, and the intricate behavior of magnetization and de-magnetization, along with vector hysteresis models. The software’s built-in motion solver incorporates a six-degree-of-freedom functionality, which allows for the precise modeling and analysis of complex scenarios such as magnetic levitation and intricate motion dynamics. This advanced capability is bolstered by innovative smart re-meshing technology, ensuring that even the most challenging electromagnetic problems can be effectively addressed. Consequently, Simcenter MAGNET stands out as an essential tool for engineers and designers looking to optimize electromagnetic systems in a range of applications.

samadii/em oftware that analyzes and calculates the electromagnetic field in 3d space using the Maxwell equation using vector FEM ad GPU computing. it provides electrostatics, magnetostatics as well and induction electronics, including the low-frequency and high-frequency ranges. samadii/em provides a multi-physics approach and high-performance electromagnetics simulation, with Samadii you can quickly address problems from semiconductors and displays to wireless communications, etc.

EMWorks offers top-tier electromagnetic simulation software designed for electrical and electronics engineering, incorporating multiphysics features. Their solutions are fully integrated into SOLIDWORKS and Autodesk Inventor®, catering to a wide range of applications such as electromechanical systems, power electronics, antennas, RF and microwave components, as well as ensuring power and signal integrity in high-speed interconnects. One of their flagship products, EMS, serves as a powerful tool for simulating and optimizing electromagnetic and electromechanical devices like transformers, electric motors, actuators, and sensors within the SOLIDWORKS® and Autodesk® Inventor® environments. Additionally, EMWorks2D is a specialized 2D electromagnetic simulation software that focuses on planar and axis-symmetric geometries, also fully embedded in SOLIDWORKS, allowing users to perform quick simulations prior to transitioning to 3D models. This functionality not only enhances the design process but also accelerates overall product development, making it easier for engineers to refine their designs efficiently. By leveraging these advanced tools, users can achieve optimal performance in their electronic designs while saving valuable time in the engineering workflow.

Reality is characterized by predictable and reliable outcomes every time. Maxwell Render™ empowers your creativity by eliminating the hassle of intricate computer graphics jargon and numerous parameter adjustments. Designed specifically for architects, designers, and artists, Maxwell Render enables efficient and precise visualization of projects with minimal setup time required. Recognized as the premier rendering software for light simulation, Maxwell 5 integrates physically accurate lighting with a vast array of Maxwell materials, resulting in strikingly realistic images. Its compatibility with a majority of 3D and CAD applications enhances its versatility. This lighting engine is ideal for professionals in various fields, including design, architecture, and the arts. Our ongoing commitment to refining the realism of the renders ensures that users experience both improved quality and enhanced ease of use. Maxwell also offers a seamless transition between GPU and CPU rendering, along with a top-tier cloud rendering service, making it a comprehensive solution for all rendering needs. Ultimately, Maxwell Render strives to redefine the standards in rendering technology for creative professionals.

Maxwell Health has now been integrated with Sun Life, signifying a groundbreaking collaboration between insurance and technology that has birthed the first technology platform distributed by a carrier. But what implications does this have for you? It translates to a seamless and enhanced experience in benefits and HR that prioritizes what truly matters. Envision a unified technology platform that complements your entire HR ecosystem and encompasses your benefits comprehensively. Streamline your processes by overseeing your complete range of benefits online, with a fully paperless approach. Revamp your benefits offerings and user experience with an intuitive interface designed for ease of use. Equip your employees with the knowledge they need to make informed choices regarding their benefits. Since benefits can be intricate, managing the technology behind them should be straightforward. At Maxwell, our skilled technology professionals are readily accessible, ensuring that you are set up for success right from the beginning, helping you navigate the complexities efficiently. With this innovative partnership, the future of employee benefits management is brighter and more accessible than ever before.

Ansys Exalto serves as an advanced post-LVS RLCk extraction software that empowers integrated circuit (IC) designers to effectively address unknown crosstalk between various components within the design hierarchy by extracting lumped-element parasitics and creating precise models for electrical, magnetic, and substrate coupling. This tool seamlessly integrates with a wide range of LVS software and can enhance the performance of any RC extraction tool you prefer. With Ansys Exalto's post-LVS RLCk extraction capabilities, IC designers are equipped to make accurate predictions regarding electromagnetic and substrate coupling effects, allowing for signoff on circuits that may have previously been deemed "too complex to analyze." The models that are extracted can be back-annotated to the schematic or netlist, ensuring compatibility with all circuit simulators. As the prevalence of RF and high-speed circuits continues to rise in contemporary silicon systems, electromagnetic coupling has become a primary factor that necessitates precise modeling to ensure the successful fabrication of silicon. Overall, Ansys Exalto represents a crucial advancement in circuit design, helping engineers navigate the complexities associated with modern electronic systems.

Maxwell is the one partner who can provide everything that a local lender requires to run a profitable business in the mortgage industry, from the point of sale to fulfillment to the secondary market. Our team is made up of mortgage veterans and technologists, who are dedicated to building the next-generation of mortgage solutions that will help local lenders improve their team's efficiency while providing an optimized borrower experience.

CST Studio Suite is an advanced 3D electromagnetic (EM) analysis software designed to facilitate the design, assessment, and optimization of various electromagnetic components and systems. It offers a unified user interface that houses solvers for a diverse range of applications spanning the entire electromagnetic spectrum. These solvers can be integrated to conduct hybrid simulations, providing engineers the versatility to efficiently analyze complex systems composed of multiple components. Furthermore, collaboration with other SIMULIA products enhances the capability for EM simulation to be seamlessly incorporated into the overall design process, influencing development from the initial phases. Typical applications of EM analysis include evaluating antenna and filter performance, ensuring electromagnetic compatibility and interference compliance, assessing human exposure to EM fields, analyzing electro-mechanical interactions in motors and generators, and studying thermal impacts on high-power devices. The ability to conduct such comprehensive analyses helps drive innovation in various industries that rely on electromagnetic technology.

Ansys HFSS is a versatile 3D electromagnetic (EM) simulation tool used for the design and analysis of high-frequency electronic devices such as antennas, interconnects, connectors, integrated circuits (ICs), and printed circuit boards (PCBs). This powerful software allows engineers to create and evaluate a wide range of high-frequency electronic products, including antenna arrays, RF and microwave components, and filters. Renowned among engineers globally, Ansys HFSS is essential for developing high-speed electronics utilized in various applications like communication systems, advanced driver assistance systems (ADAS), satellites, and Internet of Things (IoT) devices. The software's exceptional performance and precision empower engineers to tackle complex challenges related to RF, microwave, IC, PCB, and electromagnetic interference (EMI) issues. With a robust suite of solvers, Ansys HFSS effectively addresses a myriad of electromagnetic challenges, making it an indispensable resource in the field of electronic design. As technology progresses, the relevance of such simulation tools becomes increasingly critical in ensuring optimal performance in modern electronic systems.

Advance your RF simulation capabilities to effectively design, analyze, and verify radio frequency integrated circuits (RFICs) beyond conventional methods. Gain assurance through the use of steady-state and nonlinear solvers tailored for both design and verification processes. Accelerate the validation of intricate RFICs with wireless standard libraries designed for efficiency. Ensure precise modeling of components on silicon chips to achieve optimal accuracy. Enhance your designs using load-pull analysis and parameter sweeps for better performance outcomes. Conduct RF simulations within the Cadence Virtuoso and Synopsys Custom Compiler environments to streamline your workflow. Employ Monte Carlo simulations and yield analysis to further boost performance metrics. Early in the design phase, evaluate error vector magnitude (EVM) in alignment with the latest communication standards to ensure compliance. Leverage cutting-edge foundry technology right from the start of your project. It is essential to monitor specifications like EVM through RF simulation during the early stages of RFIC design. The simulations account for the effects of layout parasitics, intricate modulated signals, and digital control circuitry. Utilizing Keysight RFPro Circuit allows for comprehensive simulation in both frequency and time domains, enhancing the overall design process and accuracy. This multifaceted approach ensures that your RFICs not only meet but exceed industry standards.

Advance your approach to RF simulation by focusing on the comprehensive design, analysis, and verification of radio frequency integrated circuits (RFICs). Gain assurance through the use of steady-state and nonlinear solvers for both design and verification processes. The availability of wireless standard libraries expedites the validation of intricate RFICs. Prior to finalizing an RFIC, it is essential to confirm IC specifications through RF simulation. These simulations take into account various factors such as layout parasitics, intricate modulated signals, and digital control circuitry. With PathWave RFIC Design, you can perform simulations in both frequency and time domains, facilitating seamless transitions between your designs and Cadence Virtuoso. Achieve accurate modeling of components on silicon chips, and enhance your designs using optimization techniques like sweeps and load-pull analysis. Integration of RF designs into the Cadence Virtuoso environment is streamlined, while the implementation of Monte Carlo and yield analysis can significantly boost performance. Additionally, debugging is made easier with safe operating area alerts, allowing for immediate utilization of cutting-edge foundry technology to stay at the forefront of innovation. This holistic approach to RFIC design not only improves efficiency but also elevates the overall quality and reliability of the final products.

Utilizing the Ansys Electronics solution suite significantly reduces testing expenses, guarantees adherence to regulations, enhances product reliability, and substantially shortens development timelines. This approach enables you to create advanced and superior products that stand out in the market. By harnessing Ansys' simulation capabilities, you can address the most vital elements of your designs effectively. Our solutions empower you to tackle critical issues in product design through comprehensive simulation. Whether you're involved in antenna, RF, microwave, PCB, package, IC design, or even electromechanical devices, we offer industry-leading simulators that serve as the gold standard. These tools assist you in overcoming various challenges related to electromagnetic forces, temperature variations, signal integrity, power integrity, parasitic effects, cabling, and vibrations in your designs. Furthermore, we enhance this process with thorough product simulation, which facilitates achieving first-pass success in designing complex systems such as airplanes, automobiles, smartphones, laptops, wireless chargers, and more. By integrating our solutions, you position yourself to excel in innovation and engineering excellence.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

Cadence®, Sigrity X PowerSI® technology helps you to tackle increasingly difficult issues related switching noise, signal coupling and target voltage levels. It provides fast, accurate and detailed electrical analyses of full IC packages and PCBs. It can be used to develop power and signal integrity guidelines before layout, or after layout to verify performance and improve the design without a prototype. Sigrity X's electromagnetic (EM) solver technology allows you to perform a wide range of studies, including identifying trace and via coupling problems, power/ground fluctuation caused by simultaneously switching out put, and designing regions that are below or above voltage targets. PowerSI technology allows you to extract frequency-dependent parameter models for network networks and visualize complex spatial relationships.

Cadence®, Sigrity X OptimizationPI™ technology performs a complete AC frequency analyzer of boards and IC package to ensure high performance and save between 15% and 50 % in decoupling capacitor costs. It supports both pre-and post-layout studies and quickly pinpoints the most cost-effective decap selections. Sigrity X OptimizePI is based on proven Cadence hybrid magnetic circuit analysis technology combined with the unique Sigrity Optimization engine to help you quickly identify the best possible placement and decap locations.

The Cadence AWR Design Environment Platform streamlines the development cycles of RF/microwave products through design automation, which boosts engineering efficiency and shortens turnaround times. This all-in-one platform equips engineers with sophisticated high-frequency circuit and system simulations alongside in-design electromagnetic (EM) and thermal analyses, enabling the creation of manufacturing-ready high-frequency intellectual property with exceptional accuracy and effectiveness. With a focus on enhancing productivity, the interface is both robust and user-friendly, featuring smart and customizable design workflows tailored to meet the demands of modern high-frequency semiconductor and PCB technologies. Moreover, its integrated design capture system supports a seamless front-to-back physical design process. The dynamic linking between electrical and layout design entries ensures that any components added to an electrical schematic automatically result in a corresponding synchronized physical layout, fostering a more cohesive design experience. This innovative approach not only minimizes errors but also significantly accelerates the overall design process.

XFdtd is a comprehensive 3D electromagnetic simulation software developed by Remcom. This powerful and feature-rich solver for electromagnetic simulations delivers exceptional computing performance and eases the process of analyzing intricate electromagnetic challenges. The software supports various applications, including the design of microwave devices and antennas, as well as radar and scattering analysis. Additionally, XFdtd is utilized in biomedical fields, automotive radar systems, waveguide studies, military and defense projects, RFID technology, and electromagnetic compatibility/electromagnetic interference assessments, among others. Its versatility makes it an essential tool for engineers and researchers alike.

miniZ is a user-friendly and efficient miner designed for the Equihash algorithm. While it hasn't been tested across all GPU models, it is anticipated to be compatible with Kepler, Maxwell, Pascal, and Turing architecture GPUs. To ensure users receive important performance feedback, the console window will display relevant information such as mining speed and GPU temperature. Initially, a header listing the command line parameters will appear for user reference. Although miniZ provides warnings for common errors, it is advisable to double-check all settings for accuracy. The mining fee is established at 2% of the total mining duration. If you notice that your pool share percentage exceeds 98%, be aware that the application will soon transition to the fee pool. Conversely, if the fee pool share surpasses 2%, the miner will likely revert back to your pool. At the outset, these percentage figures may seem unbalanced, but this imbalance is simply a reflection of the short initial running time, such as 10 seconds representing about 8% of a 2-minute mining session. Overall, miniZ aims to provide an intuitive mining experience while offering insights into performance metrics.

The Cadence Clarity 3D Solver is a sophisticated software tool designed for 3D electromagnetic simulation, specifically aimed at creating essential interconnects for printed circuit boards, integrated circuit packages, and systems integrated on chip designs. This powerful tool assists engineers in overcoming intricate electromagnetic issues encountered in the development of systems for advanced technologies such as 5G, automotive applications, high-performance computing, and machine learning, all while ensuring top-tier accuracy. Leveraging Cadence’s state-of-the-art distributed multiprocessing capabilities, the Clarity 3D Solver provides virtually limitless capacity and enhances processing speed by tenfold, making it possible to tackle extensive and complicated structures with ease. Additionally, it generates precise S-parameter models that cater to high-speed signal integrity, power integrity, high-frequency RF/microwave applications, and electromagnetic compliance assessments, ensuring that simulation outcomes align closely with laboratory measurements, even for data transfer rates exceeding 112Gbps. Consequently, this tool stands as a vital asset for engineers looking to push the boundaries of technology in their designs.

Certified by Foundry, the AFS Platform provides nm SPICE accuracy, achieving speeds five times greater than conventional SPICE and more than twice as fast as parallel SPICE simulators. It stands out as the quickest nm circuit verification platform suitable for analog, RF, mixed-signal, and custom digital circuits. The latest addition of eXTreme technology enhances its capabilities. Specifically designed for large post-layout circuits, the AFS eXTreme technology accommodates over 100 million elements and operates three times faster than typical post-layout simulators. It is compatible with all leading digital solvers. With its top-tier usability, the platform maximizes the reuse of existing verification infrastructures, while its advanced verification and debugging features significantly enhance verification coverage. This results in improved design quality and reduced time-to-market. The platform guarantees SPICE accuracy and offers high-sigma verification, being a staggering 1000 times faster than brute-force simulation methods. It is user-friendly and easy to deploy, with access to AFS eXTreme technology provided at no extra cost; thus, it represents a comprehensive solution for modern circuit verification needs.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

Tidy3D, developed by Flexcompute, is an incredibly swift electromagnetic (EM) solver that utilizes the finite-difference time-domain (FDTD) technique. Its remarkable speed stems from the efficient co-design of both its software and hardware, allowing it to perform simulations significantly quicker than competing EM solvers. This unparalleled speed enables users to tackle problems that span hundreds of wavelengths, a task that traditional methods often struggle to handle effectively. Consequently, Tidy3D opens up new possibilities for researchers and engineers dealing with complex electromagnetic challenges.

Microwave Office facilitates the design of various RF passive components, including filters, couplers, and attenuators, along with active devices functioning under small-signal (AC) conditions, such as low noise and buffer amplifiers. Its linear configuration allows for the simulation of S-parameters (Y/Z/H/ABCD), small-signal gain, linear stability, noise figure, return loss, and voltage standing wave ratio (VSWR), complemented by features like real-time tuning, optimization, and yield analysis. Each E-series Microwave Office portfolio encompasses synchronous schematic and layout editors, 2D and 3D viewers, and extensive libraries featuring high-frequency distributed transmission models, as well as surface-mount vendor component RF models complete with footprints. Additionally, it offers measurement-based simulations and RF plotting capabilities. Microwave Office PCB further enhances the design process by enabling both linear and nonlinear RF circuit design through the advanced APLAC HB simulator, which provides powerful multi-rate HB, transient-assisted HB, and time-variant simulation engines for comprehensive RF/microwave circuit analysis. This extensive toolset empowers engineers to push the boundaries of RF design and streamline their development workflows effectively.

Induction heat treatment simulation offers detailed insights into the temperature variations from the outer surface to the core and identifies specific regions where phase changes take place. With SIMHEAT®, users can assess how factors like current frequency, coil design, and the positioning of concentrators influence the heat-affected zone. The material modeling aspect accounts for the electrical and magnetic characteristics that vary with temperature. Moreover, SIMHEAT® can operate independently or work in conjunction with Transvalor software, ensuring a flawless transfer of results between the two platforms. This high level of interoperability guarantees that users can rely on consistent and accurate outcomes. Furthermore, all the features and functionalities available in SIMHEAT® are also incorporated into our FORGE® software, which is tailored for simulating hot, semi-hot, and cold forming processes, thereby expanding its utility in various manufacturing applications.

A remarkable 36% reduction in power consumption for the final product has been achieved through an enhanced sensor design. This advancement accelerates research and development initiatives by allowing the simultaneous testing of numerous sensor components and design iterations. Additionally, the capability to detect design flaws within hours rather than weeks significantly shortens the product's time-to-market. The sophisticated algorithms are seamlessly integrated into a user-friendly interface, facilitating the effortless creation of exceptional touchscreen devices. Fieldscale's solvers push the limits of electrical simulation, enabling intricate analyses that were previously unattainable. Users can conduct thousands, or even millions, of analyses in various scenarios and receive results on the same day. Ultimately, Fieldscale empowers you to achieve optimal designs more efficiently and swiftly than your competitors, setting a new standard in product development. This level of innovation and efficiency can reshape entire industries, transforming the way companies approach design and production.

Automation Studio E9.0 – Educational Edition serves as a user-friendly simulation platform designed for educators to cultivate the skills of future technicians and engineers in areas such as hydraulic, pneumatic, electrical, and PLC systems, utilizing realistic illustrated components and engaging virtual trainers. Since its inception in 1986, the platform has empowered students to construct and diagnose circuits, leveraging an extensive library filled with thousands of 2D CAD and electrical symbols, in addition to immersive 3D virtual systems created with Unity 3D CAD technology. The latest version, E9, introduces a specialized Forum that facilitates the exchange of demo files and tailored libraries, along with ready-made virtual trainers for diverse technologies, remote learning capabilities, and innovative tools to develop digital twins of physical hardware. In addition to these features, users are granted the ability to personalize their symbol libraries, simulate predefined failures to enhance their troubleshooting abilities, connect to actual devices, and employ various virtual instruments such as multimeters, clamp-meters, oscilloscopes, hydraulic testers, thermometers, and manometers to evaluate and analyze system performance. This comprehensive approach not only enriches the learning experience but also prepares students for real-world applications in their future careers.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Synopsys OptSim stands out as a highly acclaimed simulator for photonic integrated circuits (PICs) and fiber-optic systems, empowering engineers to effectively design and refine photonic circuits and associated systems. With its cutting-edge algorithms for both time and frequency domains, it provides a dedicated photonic environment that ensures precise simulation results. OptSim can operate independently, complete with its own graphical user interface, or be integrated within the OptoCompiler Photonic IC design platform for enhanced functionality. When combined with OptoCompiler, it allows for electro-optic co-simulation alongside Synopsys PrimeSim HSPICE and PrimeSim SPICE electrical circuit simulators, offering a seamless experience with the PrimeWave Design Environment that facilitates advanced simulations, analyses, and visualizations, including parametric scans and Monte Carlo methods. Additionally, the software is equipped with a comprehensive array of libraries containing photonic and electronic components, as well as various analysis tools, and is compatible with a wide range of foundry process design kits (PDKs), making it an invaluable resource for engineers in the field. Its versatility and depth of features make Synopsys OptSim a crucial tool for anyone involved in photonic design.

PrimeSim HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

As power systems continue to advance, there is an increasing demand for precise and user-friendly simulation tools. PSCAD enables users to effortlessly design, simulate, and model their systems, unlocking endless opportunities for power system simulation. The software features an extensive library that includes a variety of system models, from basic passive components and control functions to intricate electric machines and other sophisticated devices. With over four decades of dedicated research and development, PSCAD has evolved significantly. The insights and suggestions from our worldwide user community have been a driving force behind this progress. This approach has solidified PSCAD's reputation as the leading choice for power system transient simulation available in the market today. Maintaining your software is the most economically sound method to safeguard, support, and enhance your investment, ensuring you derive maximum value from your tools. Additionally, regular updates and support help users stay abreast of the latest advancements and features, further enhancing their simulation experience.

Utilize a specialized toolset tailored for electrical design to efficiently create, modify, and document control systems. Generate and refresh personalized reports with ease, and seamlessly share DWG™ drawings with all relevant stakeholders. Organize your electrical drafting projects by using folders to manage drawings and rearranging files as necessary. Publish complex schematics into multipage PDFs while minimizing errors through automated numbering for wires and component tags. Leverage the Circuit Builder feature for straightforward electrical designs and choose from an extensive library of electrical symbols. Identify potential issues before the construction phase commences, and monitor parent/child contacts in real-time. Clearly define a project's input/output assignments and benefit from enhanced preview options along with direct component insertion capabilities. Experience a fully integrated mechatronics solution alongside Inventor, featuring functionalities like coil and contact cross-referencing, PLC I/O drawings generated from spreadsheets, a catalog browser for parts, real-time error detection, libraries of electrical schematic symbols, circuit design and reuse options, wire numbering, component tagging, and many additional features to streamline your workflow. Ultimately, these tools and functionalities work together to optimize the entire process of electrical design and documentation.

Analytic Solver Optimization is fully compatible with the Excel Solver, designed to tackle any conventional optimization issue, regardless of its size or type, without accommodating uncertainty. What sets it apart from other optimization tools is its ability to conduct an algebraic analysis of your model's structure while efficiently utilizing multiple cores on your computer for enhanced performance. This software can manage nonlinear models that are ten times larger and linear models that are forty times larger than those solvable by the Excel Solver, providing solutions at a significantly faster pace, along with the capability to integrate Solver Engines that can accommodate millions of variables. Additionally, Analytic Solver Simulation offers an intuitive interface for rigorous Monte Carlo simulations, risk analysis, decision trees, and simulation optimization, all powered by Frontline's sophisticated Evolutionary Solver. It features an impressive array of 60 probability distributions, including complex compound distributions, automatic fitting for these distributions, along with rank-order and copula-based correlations, plus 80 different statistics and risk measures, and tools for Six Sigma analysis, as well as multiple parameterized simulations that enhance decision-making processes. The comprehensive functionality of this software makes it an essential tool for professionals seeking to leverage advanced optimization and simulation techniques in their work.

ETAP®, a full-strength analytical engineering software company, specializes in the analysis, simulation monitoring, control, optimization and automation of electrical power system. ETAP's electrical engineering software is the most complete and comprehensive integrated power system enterprise solution.

Simpack is a versatile multibody system simulation (MBS) software that allows engineers and analysts to model and simulate the complex non-linear movements of various mechanical and mechatronic systems. This tool empowers users to create and analyze virtual 3D representations, facilitating the prediction and visualization of dynamic behaviors, along with associated forces and stresses. While primarily utilized in sectors such as automotive, engine, HIL/SIL/MIL, power transmission, railway, and wind energy, its applications extend across all fields of mechanical engineering. Notably, Simpack excels in conducting high-frequency transient analyses, including those in the acoustic range, making it a valuable asset for engineers. Originally designed to address intricate non-linear models featuring flexible bodies and severe shock interactions, Simpack continues to evolve to meet the demands of modern engineering challenges. Its adaptability ensures that a wide array of engineering problems can be effectively tackled using this advanced simulation tool.

PathWave ADS streamlines the design process by providing integrated templates that help users start their projects more efficiently. With a comprehensive selection of component libraries, locating the desired parts becomes a straightforward task. The automatic synchronization with layout offers a clear visualization of the physical arrangement while you create schematic designs. This data-driven approach enables teams to assess if their designs are in line with specifications. PathWave ADS enhances design confidence through its display and analytics features, which generate informative graphs, charts, and diagrams. Users can expedite their design process with the help of wizards, design guides, and templates. The complete design workflow encompasses schematic design, layout, as well as circuit, electro-thermal, and electromagnetic simulations. As frequencies and speeds continue to rise in printed circuit boards (PCBs), ensuring signal and power integrity is critical. Issues arising from transmission line effects can lead to electronic device failures. It is essential to model traces, vias, and interconnects accurately for a realistic simulation of the board, ensuring that potential problems are identified and mitigated early in the design phase. This multifaceted approach not only improves efficiency but also enhances the overall reliability of electronic designs.

EPLAN Electric P8 serves as a cohesive, efficient, and integrated engineering solution designed to facilitate the planning and design of electrical systems for machinery and industrial plants. This advanced software enables users to utilize 2D computer-aided engineering alongside a diverse array of engineering techniques, which range from manual drafting to standardized and template-driven methods. Once the project data is input into the schematic, it lays the groundwork for the automated generation of comprehensive documentation related to machines and plant systems. Essentially, EPLAN Electric P8 provides far more than merely creating schematics and circuit diagrams; it also automates the production of in-depth evaluations that are pivotal for project documentation, available either continuously or compiled post-project as needed. Furthermore, this software ensures that subsequent process phases receive all critical information derived from the engineering process, encompassing everything from initial planning through to manufacturing, commissioning, and ongoing maintenance and repairs. Ultimately, EPLAN Electric P8 streamlines the entire engineering workflow, enhancing efficiency and accuracy.

Complex technical systems, such as machinery and manufacturing facilities, are characterized by their intricate nature, as they include a wide array of components and subsystems drawn from various technical fields and are increasingly equipped with sensors and control mechanisms. The interactions among these components play a crucial role in influencing safety, efficiency, and user comfort. SimulationX provides a unified platform for the modeling, simulation, and analysis of these technical systems, covering areas like mechanics, hydraulics, pneumatics, electronics, controls, and various physical behaviors including thermal and magnetic effects. With extensive libraries of components that feature application-specific model elements, you can easily access the necessary tools tailored to your project requirements, making the process more streamlined and effective. This versatility allows for thorough examination and optimization of complex systems across multiple disciplines.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

Ansys Lumerical Multiphysics serves as advanced software for simulating photonic components, allowing for the integrated design of these elements by effectively capturing the interplay of various multiphysics phenomena such as optical, thermal, electrical, and quantum well interactions, all within a cohesive design platform. Designed specifically for engineering workflows, this user-friendly product design software enhances the user experience, enabling quick design iterations and delivering in-depth insights into actual product performance. By merging real-time physics with precise high-fidelity simulations in an accessible interface, it promotes a shorter time-to-market for innovative designs. Among its key offerings are a finite element design environment, integrated multiphysics workflows, extensive material models, and robust automation and optimization capabilities. The suite of solvers and streamlined processes in Lumerical Multiphysics effectively reflects the complex interactions of physical effects, facilitating accurate modeling of both passive and active photonic components. This comprehensive approach not only enhances design efficiency but also leads to improved product reliability and performance evaluations.

HyperLynx offers integrated capabilities for signal integrity, power integrity, 3D electromagnetic modeling, and electrical rule checking tailored for high-speed digital designs. By merging user-friendly features with automated processes, HyperLynx makes high-speed design analysis accessible for mainstream system designers, enabling early identification and resolution of potential issues within the design cycle. It seamlessly integrates with various PCB tools, making it a valuable addition to any PCB design workflow. The HyperLynx suite ensures a comprehensive analysis pipeline, fusing best-practice design rule checking with in-depth simulations for both signal and power integrity. Equipped with advanced 3D electromagnetic solvers, it produces precise interconnect models that enhance the design process. Users can assess design trade-offs during the pre-layout phase and confirm their designs before fabrication with thorough post-layout analyses. This tool supports a range of applications, including SerDes channels, DDRx memory interfaces, and general signal integrity assessments. Additionally, it simplifies the design and validation of a board's power-delivery network (PDN), facilitating compliance with impedance goals in a user-friendly setting. With its robust features, HyperLynx empowers engineers to create high-performance designs with confidence.

Easily perform electrical stress analysis, MTBF calculation, component derating, and FMECA analysis within your ECAD during board design. Key Features: • Uses cutting-edge AI technologies for robust and efficient design. *Seamless Integration with leading ECAD Software for streamlined workflows and real-time analyses. *Includes automated circuit strain calculators to speed up design processes. • Performs detailed analysis on electrical stress derivation for components. *Utilizes the results of thermal simulation to improve derating accuracy. *Provides thermal resistance and stress metrics for 3D Thermal Simulations. *Identifies EOS violations using Pareto analysis, and detailed reports on overstress and overdesign. *Recommends design changes to effectively resolve overstress problems. *Utilizes derating guidelines for optimal component performance. *Automates FMECA Analysis

Effective design and operation of production systems necessitates a comprehensive grasp of the behavior of multiphase flow. Utilizing flow modeling and simulation offers critical insights into the dynamics of flow, encompassing the physical principles that govern movement throughout the entire production system, starting from the reservoir's pore spaces and extending to processing facilities. The Olga dynamic multiphase flow simulator is adept at modeling transient flow behaviors, which are crucial for optimizing production capabilities. Such transient modeling is vital for conducting feasibility assessments and designing field developments. In deepwater contexts, dynamic simulation plays a pivotal role and is frequently employed in both offshore and onshore projects to analyze transient behaviors in pipelines and wellbores. By employing the Olga simulator for transient simulation, engineers can gain deeper insights beyond steady-state analyses, enabling them to forecast system dynamics, including fluctuations in flow rates, variations in fluid compositions, changes in temperature, the buildup of solids, and alterations in operational parameters. Consequently, mastering these transient characteristics is essential for improving efficiency and reliability in production operations.

Modelon’s OPTIMICA Compiler Toolkit stands out as the market's leading Modelica-based mathematical engine, providing users with a robust solution for automating, simulating, and optimizing system behaviors across the model-based design cycle. As the trusted compiler for Modelon Impact, OPTIMICA allows users to construct multi-domain physical systems by selecting from a vast library of model components. The toolkit’s cutting-edge solvers facilitate the evaluation of intricate physical systems, accommodating both transient simulations and steady-state calculations, as well as dynamic optimization. With its advanced mathematical capabilities, OPTIMICA can effectively manipulate and streamline models to enhance performance and reliability, catering to diverse industries and applications that range from automotive and active safety to energy and power generation optimization. Given the growing demand for effective power regulation in the contemporary energy landscape, optimizing the startup processes of thermal power plants has become a critical industrial requirement. Furthermore, the flexibility and efficiency of OPTIMICA make it an invaluable asset for engineers tackling complex system challenges.