Dozens of printers across the internet are printing out a manifesto that encourages workers to discuss their pay with coworkers, and pressure their employers. Motherboard reports: "ARE YOU BEING UNDERPAID?" one of the manifestos read, according to several screenshots posted on Reddit and Twitter. "You have a protected LEGAL RIGHT to discuss your pay with your coworkers. [...] POVERTY WAGES only exist because people are 'willing' to work for them." On Tuesday, a Reddit user wrote in a post that the manifesto was getting randomly printed at his job. "Which one of you is doing this because it's hilarious," the user wrote. "Me and my co-workers need answers."

Some people on Reddit have suggested that the messages are fake (i.e. printed by people with access to a receipt printer and posted for Reddit clout) or as part of a conspiracy to make it seem like the r/antiwork subreddit is doing something illegal. But Andrew Morris, the founder of GreyNoise, a cybersecurity firm that monitors the internet, told Motherboard that his firm has seen actual network traffic going to insecure receipt printers, and that it seems someone or multiple people are sending these printing jobs all over the internet indiscriminately, as if spraying or blasting them all over. Morris has a history of catching hackers exploiting insecure printers. "Someone is using a similar technique as 'mass scanning' to massively blast raw TCP data directly to printer services across the internet," Morris told Motherboard in an online chat. "Basically to every single device that has port TCP 9100 open and print a pre-written document that references /r/antiwork with some workers rights/counter capitalist messaging."

Whoever is doing this, Morris said, is doing it "in an intelligent way." "The person or people behind this are distributing the mass-print from 25 separate servers so blocking one IP isn't enough," he said. "A technical person is broadcasting print requests for a document containing workers rights messaging to all printers that are misconfigured to be exposed to the internet and we've confirmed that it is printing successfully in some number of places the exact number would be difficult to confirm but Shodan suggests that thousands of printers are exposed," he added, referring to Shodan, a tool that scans the internet for insecure computers, servers, and other devices.

"The thought of combining a printer (the bane of office workers) with the bacterium E. coli (the scourge of romaine lettuce) may seem an odd, if not unpleasant, collaboration," writes the New York Times.

"But scientists have recently melded the virtues of the infuriating tool and of the toxic microbe to produce an ink that is alive, made entirely from microbes." The microbial ink flows like toothpaste under pressure and can be 3D-printed into various tiny shapes — a circle, a square and a cone — all of which hold their form and glisten like Jell-O. The researchers describe their recipe for their programmable, microbial ink in a study published on Tuesday in the journal Nature Communications.

The material is still being developed, but the authors suggest that the ink could be a crucial renewable building material, able to grow and heal itself and ideal for constructing sustainable homes on Earth and in space... [T]he new substance contains no additional polymers; it is produced entirely from genetically engineered E. coli bacteria. The researchers induce bacterial cultures to grow the ink, which is also made of living bacteria cells. When the ink is harvested from the liquid culture, it becomes firm like gelatin and can be plugged into 3D-printers and printed into living structures, which do not grow further and remain in their printed forms...

Bacteria may seem an unconventional building block. But microbes are a crucial component of products such as perfumes and vitamins, and scientists have already engineered microbes to produce biodegradable plastics. A material like a microbial ink has more grandiose ambitions, according to Neel Joshi, a synthetic biologist at Northeastern University and an author on the new paper. Such inks are an expanding focus of the field of engineered living materials. Unlike structures cast from concrete or plastic, living systems would be autonomous, adaptive to environmental cues and able to regenerate — at least, that is the aspirational goal, Dr. Joshi said. "Imagine creating buildings that heal themselves," said Sujit Datta, a chemical and biological engineer at Princeton University who was not involved with the research....

Dr. Manjula-Basavanna is shooting for the moon, Earth's satellite, where there are no forests to harvest for wood and no easy way to send bulk building materials. There, he said, the ink might be used as a self-regenerating substance to help build habitats on other planets, as well as places on Earth. "There is a lot of work to be done to make it scalable and economic," Dr. Datta conceded. But, he noted, just five years ago creating robust structures out of microbes was unimaginable; conceivably, self-healing buildings could be a reality in our lifetime.

The game formerly known as PlayerUnknown's Battlegrounds accounts for 97% of the revenue of its maker Krafton. Given that the Seoul-based company is valued at almost $20 billion, we have a rough estimate for how much this single game is worth, according to the stock market. A good chunk of that value is in the potential that title holds for expansion. From a report: Krafton has staked its future on making PUBG -- no longer an abbreviation but a brand for a wider intellectual property franchise -- into a big fantasy universe spanning different games and entertainment genres. The first big test of this strategy is PUBG: New State, the mobile sequel that moves the battle royale action to 2051 and adds more advanced weaponry, vehicles and graphics. It arrives on Nov. 11. I haven't played it to be able to tell you how good it will be, but I would be hugely surprised if it turns into anything other than another money printer for Krafton.

The reason for my confidence is simple: The company isn't straying too far from what made the original 2017 game a hit and is mostly changing the cosmetics atop the underlying physics and gameplay. This approach has proven highly successful in the mobile arena. The smartphone game is launching in more than 200 countries and in 17 different languages and has already had more than 50 million preregistrations. Another essential element for mobile success that Krafton taps into is making the game free to play. The vast majority of smartphone app store revenue comes from games, which seems counterintuitive considering that most of those games demand no upfront payment. The real money, however, is in enticing players to make microtransactions within the game, such as personalizing your character with "skins" or buying a pet or better weapons. This is such a big deal that Epic Games took Apple and Alphabet's Google to court over the split of who gets to profit from those addictive little in-game buys in PUBG rival Fortnite.

couchslug writes: Canon, best nown for manufacturing camera equipment and printers for business and home users, is being sued for not allowing customers to use the scan or fax functions in multi-function devices if the ink runs out on numerous printer models. David Leacraft filed a class action lawsuit against Canon USA, alleging the company engaged in deceptive marketing and unjust enrichment practices.

Tonight 71-year-old Apple co-founder Steve Wozniak tweeted ten words: "A Private space company is starting up, unlike the others."

The tweet also included the URL for a new video just uploaded tonight to YouTube about a company called Privateer.

"Together we'll go far," says the narrator, later offering these thoughts on the people of our planet. "We are explorers. We are dreamers, risk-takers, engineers, and star gazers. We are human. And it's up to us to work together to do what is right and what is good."

The video's tagline? "The sky is no longer the limit.

The same tagline appears at Privateer.com, followed by two short sentences. "We are in stealth mode. We'll see you at AMOS in September 2021 in Maui, Hawaii." (With AMOS apparently, being the Advanced Maui Optical and Space Surveillance Technologies Conference running from this Tuesday through Friday.)

There's very little information about the company — although last month a 3D printing site reported Wozniak's company appeared to be using a printer for high-strength titanium — and suggested the company might have something to do with cleaning up space junk.

An anonymous reader quotes a report from Popular Mechanics, written by Laura Rider: After four long years of planning, the world's first 3D-printed steel bridge debuted in Amsterdam last month. If it stands up to the elements, the bridge could be a blueprint for fixing our own structurally deficient infrastructure in the U.S. -- and we sorely need the help. Dutch Company MX3D built the almost 40-foot-long bridge for pedestrians and cyclists to cross the city's Oudezijds Achterburgwal canal. It relied on four robots, fit with welding torches, to 3D-print the structure. To do it, the machines laid out 10,000 pounds of steel, heated to 2,732 degrees Fahrenheit, in an intricate layering process. The result? An award-winning design, pushing the boundaries of what steel can do.

Designers first came up with the concept for the bridge in 2015, with the goal of making an exceptionally efficient structure. To do so, they had to emphasize two things: simplicity and safety. To monitor the efficiency of their design, scientists at Imperial College London engineered the bridge to be a "living laboratory." A team of structural engineers, computer scientists, and statisticians developed a system of over one dozen embedded sensors for the bridge, which send live data to the university for further analysis of the bridge's performance. They monitor the bridge's movement, vibration, temperature, strain (the change in shape and size of materials under applied forces), and displacement (the amount an object shifts in a specific direction) over time. From that data, scientists built a "digital twin" -- computer science parlance for an identical, virtual rendering -- of the bridge that gets more accurate over time. With machine learning, they can now look for trends that might suggest modifications are in order.

For this bridge, designers utilized two methods of 3D printing -- Direct Energy Deposit (DED) and Powder Bed Fusion (PBF). With DED, the printer feeds material (typically in powder or wire form) through a pen-like nozzle, and an intense heat source (typically a laser, but sometimes an electron beam) melts the metal on contact. PBF works similarly in that a laser or electron beam melts powder down to build each layer. The main advantage of PBF, though, is that it operates with much smaller (and more expensive) parts, resulting in a higher-resolution project than DED could accomplish on its own. This allows designers to take their visions a step further.

Microsoft has released today a security update that will change the default behavior of the "Point and Print" feature to mitigate a severe security issue disclosed last month. From a report: First added in Windows 2000, the Point and Print feature works by connecting to a print server to download and install necessary print drivers every time a user creates a connection to a remote printer without providing installation media. Earlier this year, Jacob Baines, a reverse engineer for Dark Wolf Solutions, found that threat actors inside a company's network could abuse the Point and Print feature to run a malicious print server and force Windows systems to download and install malicious drivers.

Since Point and Print ran with SYSTEM privileges, the feature effectively provided threat actors with an easy way to gain admin rights inside any large corporate or government network. Microsoft initially tried to patch the issue -- tracked as CVE-2021-34481 -- last month, but the patches were deemed incomplete. Today, the company took another approach. Since the vulnerability is exploiting a design flaw, Microsoft chose today to change the default behavior of the Point and Print feature.

Could a flexible processor stuck on your produce track the freshness of your cantaloupe? That's the idea behind the latest processor from UK computer chip designer Arm, which says such a device could be manufactured for pennies by printing circuits directly onto paper, cardboard or cloth. From a report: The technology could give trillions of everyday items such as clothes and food containers the ability to collect, process and transmit data across the internet -- something that could be as convenient for retailers as it is concerning for privacy advocates.

In recent decades, processors have reduced in size and price to the point that they are now commonly used in everything from televisions to washing machines and watches. But almost all chips manufactured today are rigid devices created on silicon wafers in highly specialised and costly factories where dozens of complex chemical and mechanical processes take up to eight weeks from start to finish. Now, Arm has developed a 32-bit processor called PlasticARM with circuits and components that are printed onto a plastic substrate, just as a printer deposits ink on paper. James Myers at Arm says the processor can run a variety of programs, although it currently uses read-only memory so is only able to execute the code it was built with. Future versions will use fully programmable and flexible memory.

An anonymous reader quotes a report from Threatpost: Researchers have released technical details on a high-severity privilege-escalation flaw in HP printer drivers (also used by Samsung and Xerox), which impacts hundreds of millions of Windows machines. If exploited, cyberattackers could bypass security products; install programs; view, change, encrypt or delete data; or create new accounts with more extensive user rights. The bug (CVE-2021-3438) has lurked in systems for 16 years, researchers at SentinelOne said, but was only uncovered this year. It carries an 8.8 out of 10 rating on the CVSS scale, making it high-severity.

According to researchers, the vulnerability exists in a function inside the driver that accepts data sent from User Mode via Input/Output Control (IOCTL); it does so without validating the size parameter. As the name suggests, IOCTL is a system call for device-specific input/output operations. "This function copies a string from the user input using 'strncpy' with a size parameter that is controlled by the user," according to SentinelOne's analysis, released on Tuesday. "Essentially, this allows attackers to overrun the buffer used by the driver." Thus, unprivileged users can elevate themselves into a SYSTEM account, allowing them to run code in kernel mode, since the vulnerable driver is locally available to anyone, according to the firm.

The printer-based attack vector is perfect for cybercriminals, according to SentinelOne, since printer drivers are essentially ubiquitous on Windows machines and are automatically loaded on every startup. "Thus, in effect, this driver gets installed and loaded without even asking or notifying the user," explained the researchers. "Whether you are configuring the printer to work wirelessly or via a USB cable, this driver gets loaded. In addition, it will be loaded by Windows on every boot. This makes the driver a perfect candidate to target since it will always be loaded on the machine even if there is no printer connected." Affected models and associated patches can be found here and here.

"While HP is releasing a patch (a fixed driver), it should be noted that the certificate has not yet been revoked at the time of writing," according to SentinelOne. "This is not considered best practice since the vulnerable driver can still be used in bring-your-own-vulnerable-driver (BYOVD) attacks." Some Windows machines may already have the vulnerable driver without even running a dedicated installation file, since it comes with Microsoft Windows via Windows Update.

"In 2016 North Korean hackers planned a $1bn raid on Bangladesh's national bank," reports the BBC, "and came within an inch of success — it was only by a fluke that all but $81m of the transfers were halted, report Geoff White and Jean H Lee...

"It all started with a malfunctioning printer..." It was located inside a highly secure room on the 10th floor of the bank's main office in Dhaka, the capital. Its job was to print out records of the multi-million-dollar transfers flowing in and out of the bank. When staff found it wasn't working, at 08:45 on Friday 5 February 2016, "we assumed it was a common problem just like any other day," duty manager Zubair Bin Huda later told police. "Such glitches had happened before." In fact, this was the first indication that Bangladesh Bank was in a lot of trouble. Hackers had broken into its computer networks, and at that very moment were carrying out the most audacious cyber-attack ever attempted. Their goal: to steal a billion dollars.

To spirit the money away, the gang behind the heist would use fake bank accounts, charities, casinos and a wide network of accomplices.... When the bank's staff rebooted the printer, they got some very worrying news. Spilling out of it were urgent messages from the Federal Reserve Bank in New York — the "Fed" — where Bangladesh keeps a US-dollar account. The Fed had received instructions, apparently from Bangladesh Bank, to drain the entire account — close to a billion dollars. The Bangladeshis tried to contact the Fed for clarification, but thanks to the hackers' very careful timing, they couldn't get through... The bank's HQ in Dhaka was beginning two days off. And when the Bangladeshis began to uncover the theft on Saturday, it was already the weekend in New York... And the hackers had another trick up their sleeve to buy even more time. Once they had transferred the money out of the Fed, they needed to send it somewhere. So they wired it to accounts they'd set up in Manila, the capital of the Philippines. And in 2016, Monday 8 February was the first day of the Lunar New Year, a national holiday across Asia...

They had had plenty of time to plan all of this, because it turns out the Lazarus Group had been lurking inside Bangladesh Bank's computer systems for a year... Once inside the bank's systems, Lazarus Group began stealthily hopping from computer to computer, working their way towards the digital vaults and the billions of dollars they contained... But they still had one final hurdle to clear — the printer on the 10th floor. Bangladesh Bank had created a paper back-up system to record all transfers made from its accounts. This record of transactions risked exposing the hackers' work instantly. And so they hacked into the software controlling it and took it out of action.

With their tracks covered, at 20:36 on Thursday 4 February 2016, the hackers began making their transfers — 35 in all, totalling $951m, almost the entire contents of Bangladesh Bank's New York Fed account.
There's more to the story — it's a whole episode on a 10-episode BBC World Service podcast which they're calling an example of "the new front line in a global battleground: a murky nexus of crime, espionage and nation-state power-mongering. And it's growing fast."

The story has a surprise ending — but alongo the way, the BBC's article points out that the consequences for the bank's governor were almost instant. "He was asked to resign," says U.S.-based cyber-security expert Rakesh Asthana. "I never saw him again."

A new printer called Forust is using scrap wood to 3D print wooden objects that are as structurally sound as regular carved wood. Created by Andrew Jeffery and a team of researchers at Desktop Metal, the printer prints using fine sawdust that is formed into solid objects. Gizmodo reports: The printer works similarly to an inkjet printer and squirts a binding agent onto a layer of sawdust. Like most 3D printers, the object rises out of the bed of sawdust and then, when complete, can be sanded and finished like regular wood. Jeffrey sees the system as a way to save trees. "Two years ago we started looking into how we might be able to 3D print in new material," he said. "Wood waste was one of the materials we started with early on and realized it could be repurposed and upcycled with 3D printing technology. From there, we focused on building out the process using wood byproducts in order to create real wood-crafted results. We formed the company really to save forests."

schwit1 shares a report from Threatpost: Quick-response (QR) codes used by a COVID-19 contact-tracing program were hijacked by a man who simply slapped up scam QR codes on top to redirect users to an anti-vaccination website, according to local police. He now faces two counts of "obstructing operations carried out relative to COVID-19 under the Emergency Management Act," the South Australia Police said in a statement announcing the arrest. His arrest may just be a drop in the bucket: Reports of other anti-vax campaigners doing the same thing abound. Law enforcement added an additional warning to would-be QR code scammers: "Any person found to be tampering or obstructing with business QR codes will likely face arrest and court penalty of up to $10,000." The police said no personal data was breached, but the incident highlights that truly all an attacker needs is a printer and a pack of Avery labels to do real damage.

In this case, the QR codes were being used by the South Australian government's official CovidSafe app to access a device's camera, scan the code and collect real-time location data to be used for contact tracing in case of a COVID-19 outbreak, ABC News Australia reported. That's a lot of personal data linked to a single QR code just waiting to be stolen. "In this instance, people who scanned the illegitimate QR code were redirected to a website distributing misinformation from the anti-vaxxer community," Bill Harrod, vice president of public sector at Ivanti, told Threatpost. "While this is concerning, the outcome could have been far more perilous."

Twitter user @mrcatacroquer, Manual Lucio Dallo, built the Yayagram -- a DIY project that makes sending and receiving voice and text messages over Telegram a physical process just like using an old-fashioned phone switchboard. Speaking to The Verge, Dallo says he built the machine to help stay in touch with his 96-year-old grandmother. From the report: To send a message, the user physically plugs in a cable next to the recipient's name. They then press and hold a button to record audio and speak into the integrated microphone. The message then appears on the recipient's phone like a regular voice note. And when the operator of the Yayagram receives a text message, it's printed off using a built-in thermal printer.

Dallo, who's a senior engineer for software firm Plastic SCM, goes into some detail about how the device was made in this Twitter thread. It's powered by a Raspberry Pi 4, runs on Python, and uses several third-party software libraries to tie everything together. The microphone is a cheap USB one and the printer similar to those used in cashier tills. He notes that he chose to use Telegram rather than WhatsApp or another messaging service as it's more open (and he doesn't like Facebook).

Cory Doctorow, writing at Wired: When we talk about social media monopolies, we focus too much on network effects, and not enough on switching costs. Yes, it's true that all your friends are already stuck in a Big Tech silo that doesn't talk to any of the other Big Tech silos. It needn't be that way: interoperable platforms have existed since the first two Arpanet nodes came online. You can phone anyone with a phone number and email anyone with an email address.

The reason you can't talk to Facebook users without having a Facebook account isn't that it's technically impossible -- it's that Facebook forbids it. What's more, Facebook (and its Big Tech rivals) have the law on their side: the once-common practice of making new products that just work with existing ones (like third-party printer ink, or a Mac program that can read Microsoft Office files, or an emulator that can play old games) has been driven to the brink of extinction by Big Tech. They were fine with this kind of "competitive compatibility" when it benefited them, but now that they dominate the digital world, it's time for it to die.

To restore competitive compatibility, we would need reform to many laws: software copyright and patents, the anti-circumvention laws that protect digital rights management, and the cybersecurity laws that let companies criminalize violations of their terms of service.

Long-time Slashdot reader destinyland writes: The New York Times tells the story of Hungarian-born Dr. Kariko, whose father was a butcher and who growing up had never met a scientist — but knew they wanted to be one. Despite earning a Ph.D. at Hungary's University of Szeged and working as a postdoctoral fellow at its Biological Research Center, Kariko never found a permanent position after moving to the U.S., "instead clinging to the fringes of academia."

Now 66 years old, Dr. Kariko is suddenly being hailed as "one of the heroes of Covid-19 vaccine development," after spending an entire career focused on mRNA, "convinced mRNA could be used to instruct cells to make their own medicines, including vaccines."
From the article: For many years her career at the University of Pennsylvania was fragile. She migrated from lab to lab, relying on one senior scientist after another to take her in. She never made more than $60,000 a year... She needed grants to pursue ideas that seemed wild and fanciful. She did not get them, even as more mundane research was rewarded. "When your idea is against the conventional wisdom that makes sense to the star chamber, it is very hard to break out," said Dr. David Langer, a neurosurgeon who has worked with Dr. Kariko... Kariko's husband, Bela Francia, manager of an apartment complex, once calculated that her endless workdays meant she was earning about a dollar an hour.
The Times also describes a formative experience in 1989 with cardiologist Elliot Barnathan: One fateful day, the two scientists hovered over a dot-matrix printer in a narrow room at the end of a long hall. A gamma counter, needed to track the radioactive molecule, was attached to a printer. It began to spew data.

Their detector had found new proteins produced by cells that were never supposed to make them — suggesting that mRNA could be used to direct any cell to make any protein, at will.

"I felt like a god," Dr. Kariko recalled.
Yet Kariko was eventually left without a lab or funds for research, until a chance meeting at a photocopying machine led to a partnership with Dr. Drew Weissman of the University of Pennsylvania: "We both started writing grants," Dr. Weissman said. "We didn't get most of them. People were not interested in mRNA. The people who reviewed the grants said mRNA will not be a good therapeutic, so don't bother.'" Leading scientific journals rejected their work. When the research finally was published, in Immunity, it got little attention... "We talked to pharmaceutical companies and venture capitalists. No one cared," Dr. Weissman said. "We were screaming a lot, but no one would listen."

Eventually, though, two biotech companies took notice of the work: Moderna, in the United States, and BioNTech, in Germany. Pfizer partnered with BioNTech, and the two now help fund Dr. Weissman's lab.

Following reports that a recent update to Windows 10 was causing blue screens as well as problems with printing, Microsoft issued a new series of updates to address the issues. But it seems that the problems caused by this month's Patch Tuesday updates are actually worse than first thought. BetaNews reports: Users with certain brands of printer experienced APC_INDEX_MISMATCH errors and blue screens, but now Microsoft has issued a warning that there may be additional problems with elements missing from print outs, or even entirely blank pages being output. The problematic updates are KB5000802, KB5000808, KB5000809 and KB5000822. In the support documentation for these four updates, Microsoft acknowledges the APC_INDEX_MISMATCH error problems and BSoDs, and directs people to install the relevant patches for their system. But the company now also acknowledges that there are more problems with the original updates than first appeared to be the case.

For each of these four updates Microsoft issues the same warning: "After installing updates released March 9, 2021 or March 15, 2021, you might get unexpected results when printing from some apps..." There is currently no fix, and Microsoft is not even able to offer a workaround right now. Instead, the company simply says: "We are working on a resolution and estimate a solution will be available in the coming days."

An anonymous reader quotes a report from Hackaday: Probably the best known brand of cutter comes from Cricut, and that company has dropped a bombshell in the form of an update to the web-based design software that leaves their now very annoyed users with a monthly upload limit of 20 new designs unless they sign up for a Cricut Access Plan that costs $9.99 on monthly payments. Worse still, a screenshot is circulating online purporting to be from a communication with a Cricut employee attempting to clarify matters, in which it is suggested that machines sold as second-hand will be bricked by the company.

We'd like to think that given the reaction from their online community the subscription plan will backfire, but unlike the world of 3D printing their market is not necessarily an online-savvy one. A crafter who buys a Cricut from a bricks-and-mortar warehouse store and uses it with Cricut cartridges may not balk at being required to pay rent to use hardware that's already paid for in the same way a member of our community with a 3D printer would. After all, Cricut have always tried to make their software a walled garden. However if the stories about second-hand models being bricked turn out to bear fruit that might be a different matter. UPDATE 3/18/21: Cricut has decided to reverse its decision and allow every member to upload an unlimited number of images and patterns for free.

"Right now, every member can upload an unlimited number of images and patterns to Design Space for free, and we have no intention to change this policy," a Cricut spokesperson told us in an email. "This is true whether you're a current Cricut member or are thinking about joining the Cricut family before or after December 31, 2021."

They addressed these changes in a letter to the Cricut community, which you can read here.

"Mighty Buildings is using robots and 3D printers to build a $15 million community of homes in California," reports Business Insider: Mighty Building's upcoming project in Rancho Mirage, California will have the title of "world's first planned community of 3D printed homes," according to its maker... The tech-forward housing development will consist of 15 homes across five-acres. This $15 million project will be built using the Mighty Kit system, which utilizes prefabbed panels to create custom homes.

Through this system, gone are the days of concrete. Instead, the homes will be based on Mighty Building's 3D printed proprietary Light Stone Material, which sets its shape upon UV light exposure, according to the company. The printers also rely on "robotic automation" and robotic arms, the latter for functions like quality control scans, Ruben told Insider in an email interview...

The 3D-printed homes won't look any different than a traditionally constructed mid-century modern home. The 1,450 square-foot homes — which will be placed atop 10,000-square-foot plots of land — will come with three bedrooms and two bathrooms. If that's not enough space, the homes will also have a separate 700-square-foot two-bed, one-bath unit. Looking to take advantage of the California sunshine? The backyard will feature a swimming pool and deck, but this outdoor space can be upgraded with hot tubs, firepits, or open-air showers...

The homes will be "zero-net-energy," relying on solar and optional Tesla Powerwall batteries for power. Electric vehicle chargers also come optional.
This development should be completed next spring, reports Business Insider — adding that the company "is already in talks with a 'number of developers' for potential future communities."

"A company says it has listed the first 3D printed house in the United States for sale," reports CNN. "This is the future, there is no doubt about it," says Kirk Andersen, the director of operations at SQ4D Inc.

SQ4D uses automated building methods, or 3D printing, to build structures and homes... The company can set up its Autonomous Robotic Construction System at a build site in six to eight hours. It then lays concrete layer by layer, creating footing, the foundation of a house and the interior and exterior walls of the structure... "The cost of construction is 50% cheaper than the cost of comparable newly-constructed homes in Riverhead, New York, and 10 times faster," said Stephen King, the Zillow Premier agent who has the 3D house listing...

"I want people to not be afraid of automation...it is just a different tool and different method. But it's still the same product; we are still building a house at the end of the day," says Kirk Andersen, the director of operations at SQ4D...

"We can make things more affordable and safer. We can use the technology to tackle homelessness, and aid in disaster relief in an eco-friendly way," Andersen said.

Another service is joining the Google graveyard, for better or worse. As the latest in a long series of Google service shutdowns, Cloud Print will be terminated in just a few short hours, meaning it will no longer be accessible for ChromeOS customers or others. From a report: Most internet users have probably never used Cloud Print a single time -- it was primarily designed for ChromeOS customers who had limited or no access to traditional printers years ago. However, now that ChromeOS boasts much broader support for printing devices, Cloud Print has effectively become obsolete. It still has a few unique advantages, such as the ability to share your printers with friends, but for the most part, there's no reason for Google to keep it around.