Follow Slashdot blog updates by subscribing to our blog RSS feed

 



Forgot your password?
typodupeerror
×

Submission + - Reactions to Disgusting Images Predict a Persons Political Ideology (elsevierhealth.com)

LuxuryYacht writes: A new study shows that the way your brain responds to photos of of maggots, mutilated carcasses, and gunk in the kitchen sink gives a pretty good indication of whether you're liberal or conservative.

"Remarkably, we found that the brain's response to a single disgusting image was enough to predict an individual's political ideology," Read Montague, a Virginia Tech Carilion Research Institute psychology professor who led the study, said in a written statement.

83 men and women viewed a series of images while having their brains scanned in a functional MRI (fMRI) machine. The images included the disgusting photos described above, along with photos of babies and pleasant landscapes.

Afterward, the participants were asked to rate how grossed out they were by each photo. They also completed a survey about their political beliefs, which included questions about their attitudes toward school prayer, gun control, immigration, and gay marriage.

There was no significant difference in how liberals and conservatives rated the photos. But the researchers noted differences between the two groups in the activity of brain regions associated with disgust recognition, emotion regulation, attention and even memory. The differences were so pronounced that the researchers could analyze a scan and predict the person's political leaning with 95 percent accuracy.

Comment 3D Printing is Not Just Glorified Glue Guns (Score 4, Informative) 490

It's sad that 3D printing had become synonymous with FDM or glorified glue guns (GGG). There are lots of different technologies that fall under the umbrella of 3D printing.

Here's a gun that was 3D printed using DMLS (Direct Metal Laser Sintering) for the metal parts and SLS for the grips. It's both durable and viable.
http://www.youtube.com/watch?v...
http://www.engineering.com/3DP...

Here's a few other 3D printing processes that are not FDM glorified glue guns:

SLS
http://en.wikipedia.org/wiki/S...

DMLS
http://en.wikipedia.org/wiki/D...

LOM
http://en.wikipedia.org/wiki/L...

SLA
http://en.wikipedia.org/wiki/S...

Comment How About Also Having a Store Without Registration (Score 1) 241

... so that you can buy or try any app just like you would download apps for linux distros, without having to register or give an app access to all my stored info? Why does a calculator app need to access my contact list or location data? Will the results vary based on my contacts or location?

And while you're at it an open source version of Android. I'm happy to pay for apps that I really want but lets at least have a layer of security between applications and stored data, location, call history etc etc

Comment Re:This Won't Work Well With FDM/FFF (Score 2) 582

They probably don't have access to an SLS printer which will work for an application like this along with the right alloy.

SLA may be used to print the part in one step or print a mold that may be used for lost wax type casting of several alloys durable enough for an application like this.

Comment This Won't Work Well With FDM/FFF (Score 3, Interesting) 582

The resolution and materials commonly available for FDM/FFF are too poor for application like these. The quality of the print is just too poor and they are only using p400 ABS for material. That is why their prints aren't very durable.

SLA however offers the resolution and the materials to produce parts that are strong and reliable enough for these types of rugged applications. Some photopolymers for SLA are 100-1,000 x stronger than the ABS they are using.

Comment They Just Need Faster 3D Printers (Score 1) 93

FDM is slow compared to new SLA, micro-nozzle and inkjet deposition processes. I'm not sure what FDM printer tech from the 80's they are currently using, but by using newer additive manufacturing techniques and new materials they can cut their 2500 hour print time down to well under 250. Inkjet and SLA is capable of print rates in the Liters per Hour and easily down to the 10's of microns of resolution. You just won't find these types of printers sold by the old 3D printer co's sitting on their old 80's tech that they are still trying to squeeze every last day out of their old patents.

Comment Re:Patents Are The Problem (Score 1) 39

Some of the problems are with patenting the obvious or having overlapping patents. Too many patents overlap each other or are painfully obvious that are granted with the idea that these issues should be settled later in the courts. This has led to abuse of the original intent of the system.

If society also decides that patents are only for the purpose of financial gain and the deliberate hinderance to scientific progress and the betterment of mankind then they deserve what they get. Most people are just unaware of the current gaming of the system and don't feel this way.

Comment Patents Are The Problem (Score 4, Insightful) 39

Inkjets have been used for years to print living cells and also the scaffolding for cells to adhere to. The problem isn't so much the tech but the sea of patents blocking anyone from bringing a complete system to market. When this problem is solved look for rapid progress on many fronts. Until then maybe it will only be available in countries that favor technological progress over nurturing an obsessive compulsion to hoard money that goes unused.

Patents are the problem with tissue engineering, just as it is with other 3D print applications. I'm not against patents. It's just that the current way it's being run isn't working to help move tech progress forward, it only helps a few to make money and also keep control over the rate of progress.

Comment It's Right Before the Spring Festival Now (Score 1) 61

Security seems to be much higher here currently. We are having a more difficult time right now shipping anything such as liquids and chemicals using the local logistics companies within China. I've asked around, and the most common answer is that it's due to it being right before the busiest travel period in China.

Comment Other Low Cost ARM Boards to Consider ... (Score 4, Interesting) 233

$49 Cubieboard Allwinner A10 + 512M/1GB DDR3 , 4Gb Nand Flash, 10/100M Ethernet, HDMI, 2 USB Host, 1 micro SD slot, 1 SATA, 1 ir, 96 GPIO pins ncluding I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP
http://cubieboard.org/

£40 Allwinner A10 + 1GB RAM, 4Gb NAND, Wifi: 802.11 b/g/n, 3.5mm Earphone Jack, 1x Mini Usb, 1x Hdmi Out, Micro Sd slot,
http://gooseberry.atspace.co.uk/

$65.00 Allwinner A10 1GB RAM, 4GB NAND, 3.5mm microphone jack, 3.3v TTL 4-pin header, 2 x USB A 2.0, 10/100 Ethernet, Realtek 802.11n WiFi, HDMI up to 1080p, 3.5mm composite AV, 3.5mm component Y/Pb/Pr, SDHC card slot
https://www.miniand.com/products/Hackberry%20A10%20Developer%20Board

$89 Freescale i.MX6 Duallite, 1 GB DDR3, Audio, Optical S/PDI, HDMI, Camera interface, SD Slot, Serial, Expanison header GPIO, USB, USB OTG, GB-LAN, WiFi 802.11n, Bluetooth
http://wandboard.org/

$89 Exynos4412 1.7Ghz ARM Cortex-A9 Quad Core, 10/100Mbps Ethernet, 2 x High speed USB2.0 Host,HDMI, SD Slot, Headphone jack
http://www.hardkernel.com/renewal_2011/products/prdt_info.php

EU

Google Map App's Version of Anonymity Might Violate EU Privacy Laws 89

Ars Technica reports that Google's map application for iOS, however popular it might be with users, raises red flags with European regulators, who maintain that it by default does not sufficiently safeguard user privacy as required by EU privacy rules. Ars quotes Marit Hansen of Germany's Independent Centre for Privacy Protection on why: "Hansen's main gripe is that Google's use of 'anonymous' is misleading. 'All available information points to having linkable identifiers per user," she told Computerworld. Hansen added this would allow Google to track several location entries, thus leading to her assumption that Google's 'anonymous location data' would be considered 'personal data' under the European law."

Comment There is Also the Cubieboard for $49 (Score 5, Informative) 111

http://cubieboard.org/ and also on http://www.indiegogo.com/cubieboard

It uses the A10 and has more features. The A10 is a full featured version of the A13

1G ARM cortex-A8 processor, NEON, VFPv3, 256KB L2 cache
Mali400, OpenGL ES GPU
512M/1GB DDR3 @480MHz
HDMI 1080p Output
10/100M Ethernet
4Gb Nand Flash
2 USB Host, 1 micro SD slot, 1 SATA, 1 ir
96 extend pin including I2C, SPI, RGB/LVDS, CSI/TS, FM-IN, ADC, CVBS, VGA, SPDIF-OUT, R-TP..
Android, Ubuntu and other Linux distributions

Slashdot Top Deals

Those who can, do; those who can't, write. Those who can't write work for the Bell Labs Record.

Working...