Alternatives to TAITherm

Orbital Stack, an AI and CFD web-based program, provides earlier qualitative guidance. It compares a wide range of land-use options and shapes, and highlights any red flags. It allows for climate-conscious, high performance developments that are not possible with traditional studies. Orbital Stack was developed by world-renowned experts in microclimate engineering and wind. It is a game-changer in the architecture and building design industry, providing our clients direct access for wind comfort and safety analysis as well as thermal comfort and shadowing analysis and cladding pressure simulations. This allows architects to quickly understand the climate effects of their proposed building designs and make better decisions, resulting in more resilient and high-performing projects.

ColdStream is an engineering platform for thermal simulation that runs in the cloud. It supports your entire thermal management process, from thermal design to thermal analysis. Diabatix's Thermal Simulation Software allows your business to accelerate product development by using only the latest technologies. Get insights on temperature distribution, heat dissipation and fluid flow, thermal resistance and thermal radiation, cooling capability, and more. ColdStream will find the most suitable heat sinks for your electronic devices and products. In just a few simple clicks, you can upload your geometry, configure the thermal simulator operating conditions, and set the design objectives for your heat sinks.

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

SINDA/FLUINT is a powerful and proven heat transfer and fluids simulation tool that has been providing users with these capabilities for decades. These capabilities continue to grow each year. SINDA/FLUINT provides a generalized, comprehensive tool for simulating thermal/fluid system simulations, such as those used in the electronics, automotive and petrochemical industries, power generation, medical and aerospace industries. SINDA/FLUINT allows you to gain a better understanding and save time and money through a faster and easier design process. You decide what is important, and how you want to answer your design performance questions. The application is also completely extensible, making it the most versatile software product for thermal and fluids on the market. You can choose which features you want and decide on the accuracy and approximation levels that are appropriate. Also, you can decide on what outputs you need.

RadCAD uses an ultra-fast Monte-Carlo ray-tracing algorithm that is accelerated by octa-trees to compute radiation exchange and view factors. C&R Technologies' innovations to the ray-tracing process resulted in a highly efficient thermal radiation software. RadCAD models diffuse or specular surfaces accurately, regardless of the density of nodes. The number of nodes is determined by the thermal solution, not by the accuracy requirements for the radiation. RadCAD uses user-defined databases for optical properties. Each surface coating defines absorptivity and transmissivity as well as reflectivity and specularity for both solar and infrared spectrum regimes. These properties can be defined in relation to incident angle, or even wavelength dependence.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

Simcenter Flotherm, with its 34 years of development, user feedback and extensive experience in electronic cooling simulations for thermal analysis, is the leading software solution. It accelerates development from IC packages, PCBs, and enclosures to large systems, such as data centres. Fast, accurate CFD simulations of electronics cooling can improve electronics thermal management and reliability from the initial pre-CAD exploration through to final verification. Simcenter Flotherm is a tool that integrates into the electronics development workflow to allow thermal engineers to run simulations, and to provide accurate results in a timely manner. It also provides feedback to other engineering functions. It supports thermal management and simulation-based decisions from early-stage architectural to final thermal design validation. This helps reduce development time and eliminates the risk of expensive reliability-related warranty costs, or any late-stage respins.

6SigmaET is an electronic thermal modeling tool that uses advanced computational Fluid Dynamics (CFD), to create precise models of electronic equipment. Our thermal simulation software is specifically designed for electronics. It offers unparalleled intelligence, automation, and accuracy to help you meet all your requirements and overcome any thermal design challenges. 6SigmaET is the fastest-growing thermal simulator software in the electronics cooling market since its inception in 2009. 6SigmaET's versatility allows you to simulate the thermal performance electronic components, from the smallest ICs up to the most powerful servers. Watch one of our videos to learn more about 6SigmaET's benefits for your industry. Or, browse our case studies. You can import the entire CAD geometry and PCB designs into 6SigmaET to perform thermal analysis. This will reduce the time it takes to create models.

Thermal Desktop is a complete model creation tool. Objects such as finite element, lumped capacitance, and built-in finite differences can be combined in any way. Thermal-specific objects, such as insulation, heat loads and heaters, can be added to any model, from automotive components to manned satellites. Thermal Desktop allows full parameterization by using variables and arbitrarily complicated expressions instead of hardwired numbers. These variables, also known as symbols, enable models to be quickly manipulated by a few keystrokes. This makes it easy to update or maintain the model, perform sensitivity studies, and investigate what-if scenarios. This gives you access to SINDA/FLUINT’s optimization and reliability modules, as well as automatic model correlation.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

CoTherm, a coupling software and process automation program, acts as a liaison between CAE programs. CoTherm simplifies process automation. It can be used to run sensitivity studies, design of experiments or multiple CAE models in a single process. This capability can streamline preprocessing, thermal analysis or transient analysis. CoTherm provides templates for common coupling and automation tasks. CoTherm has optimization capabilities to determine the best inputs for your design. The general optimization sub-processes can be used to optimize any CAE analysis. CoTherm’s mathematically rigorous solution, including multiple global and local methods, removes guesswork from your design process. CoTherm supports a wide range of thermal and CFD code. CoTherm’s powerful tools enable the coupling of any program that can be run from the command line or config files.

AnyCasting Software has been a leading simulation program for castings for over 20 years. We are currently working with companies that manufacture automobiles, ships and heavy material industries. We have sold over 600 copies in the world and solved and provided technical consulting on over 470 projects. AnyCasting offers stress analysis that can be used to simulate deformation, heat and stress analysis. It can also help users design the best mold by providing automatic mold designing. Hyundai Motors and Hyundai Heavy Industries are among the domestic customers who have been satisfied. Identify the location of gas defect caused by the isolation air during the filling process and flow of the melt. Our software locates defects by comparing air pressure to the pressure in the melt.

Ansys Fluent, the industry-leading fluid sim software, is known for its superior physics modeling capabilities as well as industry-leading accuracy. Ansys Fluent allows you to innovate and optimize your product performance. You can trust your simulation results when you use software that has been thoroughly tested across a variety of applications. Ansys Fluent allows you to create advanced physics models, analyze fluid phenomena, and more - all in an intuitive and customizable environment. This powerful fluid simulation software will accelerate your design cycle. Ansys Fluent has the best-in-class physics models. It can efficiently and accurately solve large, complex models. Ansys Fluent unlocks the potential for CFD analysis. Fluid simulation software that is fast and efficient. This software will help you to be the best in the market. Fluent's industry-leading features allow for endless innovation without compromising on accuracy.

Pyris™, the benchmark for high-sensitivity thermal analyses, brings your PerkinElmer thermal instruments and data to life. Pyris, the most popular choice for thermal analysis, is user-friendly and intuitive. It also offers a variety of standard features to maximize flexibility. Pyris is the perfect software for any application, whether it's a fully automated research lab, an automated QA/QC laboratory, or a standalone instrument. Pyris software is constantly improved based on feedback from customers to ensure maximum user satisfaction. A common platform for the instruments makes it simple to use and easy to learn. Pyris software is simple to use, but does not lose its capabilities. The software allows you to run multiple analyzers at the same time and conduct data acquisition and analyses in one window. Data import/export flexibility and a wide range of analytical options.

Our STARe software sets the standard for thermal analysis. It offers virtually limitless evaluation options. Modularity, flexibility and automation are some of its unique features. The software helps you stay compliant in a regulated field. All of our thermal systems can be controlled by a single powerful software platform. We offer the most comprehensive line of thermal systems and instruments. Our thermal analysis software, STARe, is easy to use and powerful. The instruments receive measurements and experiments, and the curves are evaluated instantly based on user preferences. STARe is the industry standard in thermal analysis software. It is a software that is extremely flexible and offers almost limitless possibilities for evaluation. STARe is the comprehensive software that powers METTLER TOLDEO’s thermal analysis systems. It simplifies workflows.

Ansys Icepak solves thermal management problems using CFD. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak offers powerful electronic cooling solutions using the industry-leading Ansys Fluent CFD solver to perform thermal and fluid flow analysis of integrated circuits, packages, printed circuit board (PCBs), electronic assemblies and enclosures. Ansys' Icepak CFD solution uses the Ansys Electronics Desktop GUI (GUI). Perform heat transfer analysis conjugated with conduction, convection and radiation. Advanced capabilities include laminar and turbulent flow modeling, species analysis, including radiation and convection. Ansys PCB Design Solution allows you to simulate PCBs and ICs and accurately evaluate a system.

Take advantage of the power of thermal analysis for natural solidification in a software package that is affordable and capable. CAPlite has a simple, step-by-step graphical user interface that is ideal for anyone who does not have experience with casting software. CAPlite takes you from a CAD model through to the post-processing. Natural solidifications provide results in minutes. CAPlite can identify casting problems in all types of castings, from die casting to sandcasting. Natural solidifications are easy to use and can be used to enhance your entire casting process at any stage. They can help identify defects or visualize the otherwise abstract solidification process. CAPlite gives you the power of natural sinterings and more, allowing you to improve your castings for a fraction of their cost.

Ansys Sherlock, a reliability-physics-based electronic design tool, provides fast and accurate life predictions at the component and board levels for electronic hardware in early design stages. Ansys Sherlock automates the design analysis of electronic hardware. It provides accurate and fast life predictions at the component, board, and system levels during early design stages. Sherlock bypasses the 'test-fail-fix-repeat' cycle by empowering designers to accurately model silicon-metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. Sherlock quickly converts embedded libraries containing more than 500,000 parts into computational fluid dynamics and finite element analysis models. Each model includes accurate geometries, material characteristics, and stress information.

MSC Nastran is a multidisciplinary application for structural analysis that engineers use to perform static, dynamic and thermal analysis in the linear and nonlinear domains. It also includes automated structural optimization and award-winning embedded fatigue analysis technologies. All of this is enabled by high performance computing. MSC Nastran is used by engineers to ensure structural systems are strong, stiff, and durable. This helps to prevent structural failures (excess stress, resonance, buckling or other detrimental deformations) which could compromise structural function and safety. MSC Nastran can also be used to improve structural designs' economy and passenger comfort. Creating industry-leading product differentiations or optimizing existing designs can lead to industry advantages. Reduce downtime and costs by resolving structural problems that may arise during product service.

Simcenter MAGNET provides a powerful electromagnetic simulation solution to predict the performance of motors and generators. It can also be used for predicting the performance of sensors, transformers. actuators, solenoids or any other component with permanent magnets. Simcenter MAGNET allows you to predict the performance of any part with permanent magnets or coils. Simulate low-frequency electromagnetic fields. Simcenter MAGNET has the ability to accurately model electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows complex problems such as magnetic levitation and complex motions to be accurately modelled and analyzed. A unique smart remeshing technology makes this possible.

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Modelon's OPTIMICA Compiler Toolkit is the most powerful Modelica-based mathematical engine available. It allows users to automate, simulate, and optimize system behavior throughout the model-based design process. OPTIMICA is the compiler for Modelon's Impact. It allows users to create multi-domain physical systems using thousands of model components. OPTIMICA's state of the art solvers enable evaluation of complex physical system - supporting both transient simulations and steady-state computations as well dynamic optimization. The sophisticated mathematical engine can simplify and manipulate models to improve performance and robustness. This engine is used in a variety of industries and applications, including automotive, active safety, energy and power plant optimization. Start-up optimization of thermal power plant is essential to meet the increasing demand for power regulation in today's energy market.

Physical and Operational (POM Suite) is a comprehensive package that allows for steady-state, transient, and small-signal analysis to be performed on electric power system networks. This suite can be used in planning and operation environments. It is designed for large analyses and offers parallel and multithreading computations. POM Suite can be used via a GUI (graphical user interface) or a command-line interface. One simulation run can simulate millions of N-1-1 and N-2 contingencies. Automatic optimal corrective measures to reduce voltage violations, thermal violations, and steady-state instability violations. Automated optimal corrective actions to reduce transient stability violations. Modelling complex user-definable Remedial Action Schemas (RAS) actions. Automating and significantly expediting studies to conform with NERC Standards. Automated AC transfer/load pockets and contingency analyses with visualization.

Vampire (Virtual Additive Manufacturing System): This software simulates 3D printing in order to predict and analyze the results. It also performs heat transfer analysis and deformation analysis based on thermal expansion and prediction. It is important to identify and address various manufacturing problems in advance, as 3D additive manufacturing can be expensive and time-consuming. This can be done by using analysis techniques that are suitable for additive manufacturing. Vampire offers key tools to build a smart preprocessing system for this purpose.

T*SOL is a simulation program that can be used to calculate the yield of a solar thermal system. T*SOL can be used to optimize your solar thermal system, dimension storage, collector arrays, and roofs, and determine its economic efficiency. You will have access to a wide range of systems for heating support and domestic hot water heating, as well as for pool heating and process heat, at the beginning of the design process. You will receive dimensioning suggestions during the design process and can use a parameter variation in order to find the best combination, e.g. You can adjust the storage size and area. Graphically, you can display the parameters of the simulation results like energies, temperatures and volumes. There are two types of display formats available: line graphs and bar charts. You can change the time axis between a day or up to a full year.

Our unique, transient Lattice Boltzmann physics PowerFLOW CFD solution allows simulations to accurately predict real-world conditions by leveraging this unique technology. PowerFLOW suite allows engineers to evaluate product performance before any prototype is built. This is when budgets and design impact are most important. PowerFLOW imports complex model geometry and performs accurate and efficient aerodynamic, thermal management and aeroacoustic simulations. Automated domain modeling and turbulence modeling without the need to manually volume mesh or boundary layer mesh can be done with PowerFLOW. PowerFLOW simulations can be run confidently on a large number of compute cores running on common High Performance Computing platforms (HPC).

ENVI-met 3D microclimate simulation software. It can be used for many purposes, including urban planning, building design, energy efficiency, and other climate parameters. ENVI-met can simulate many climate conditions, including day and night temperatures, humidity, wind speed and solar radiation in cities. The software can simulate the effects of different building materials such as glass or stone on the climate in the surrounding environment. It is used to predict how urban design changes will affect the microclimate and human thermal comfort in cities around the world. It is vital that cities become more resilient and healthier as climate change is having a significant impact on the planet. ENVI-met can help support these goals by assessing the potential of new buildings, green space, and urban planning, and making informed decisions.

AVEVA PRO/II™, Simulation is a steady state simulator that optimizes plant performance through process design, operational analysis, engineering studies, and improved process design. AVEVA PRO/II simulation optimizes plant performance through improved process design, operational analysis, and engineering studies. AVEVA PRO/II Simulation is designed to perform heat and material balance calculations for a wide variety chemical processes. For the most cost-effective operation, you can design new processes or evaluate alternative plant configurations. AVEVA PRO/II simulation is now available online with seamless maintenance, on-demand access, and flexible use. Our support team has over 15 years of combined experience. AVEVA PRO/II simulation optimizes plant performance through process design improvements and operational analysis. It also performs engineering studies.

Simufact Additive, a powerful and scalable solution for the simulations of metal-based additive manufacturing processes, is available. Simufact Additives can be used to optimize metal 3D printing and rapid prototyping. Simufact additive can help you significantly reduce the number test prints. We want to help you create AM components with repeatable dimensions. Simufact Additive's multiscale approach to simulation combines the best of both mechanical and thermal methods in one unique software solution. You can choose the simulation method that best suits your needs. Simufact Additive, a specialized software solution, is dedicated to the simulation and analysis of additive manufacturing processes. This is reflected in a lean operation concept for the user.

A thorough understanding of multiphase flow behavior is essential for successful production system design and operation. Flow simulation and modeling provide valuable insights into flow behavior. This includes the physics that describes flow through the entire production system, from the reservoir pore to the process facility. To maximize production potential, the OLGA dynamic multiphase flows simulator models time-dependent behavior or transient flow to maximize production potential. For field development planning and feasibility studies, transient modeling is a crucial component. In deepwater, dynamic simulation is an essential component. It is used extensively in both onshore and offshore developments to study transient behavior in wellbores and pipelines. The OLGA simulator allows for transient simulation, which adds an additional dimension to steady-state analyses. It predicts system dynamics such time-varying changes of flow rates, fluid compositions and temperature.

Frost 3D software lets you create scientific models of permafrost temperatures under the thermal influence from pipelines, production wells and hydraulic constructions. This software takes into account the thermal stability of the ground. The software package is based upon ten years of experience in programming, computational geometry and numerical methods. It also allows for parallelization of computational algorithm. 3D computational domain created with soil lithology and surface topography. 3D reconstruction of pipes, boreholes and basements and foundations of buildings; Importation of 3D objects, including Wavefront (OBJ), StereoLitho(STL), 3D Studio Max (F3O), and Frost 3D Objects (3DS), Library of thermophysical property of ground, building elements and parameters of cooling units; Specification and heat transfer parameters on objects' surfaces and thermal and hydrological characteristics.

Simulating and analyzing your product design will reduce the cost of physical prototyping and increase your products' durability and reliability. It is crucial to your product development to use digital prototypes to understand the performance of your designs in real-world situations. Creo Simulation was designed exclusively for engineers. It includes structural, thermal and vibration analysis solutions, as well as a comprehensive set finite element analysis (FEA). You can validate and analyze the performance of 3D virtual prototypes with Creo Simulation before you even make the first part. We offer unique and flexible simulation solutions to our customers. This section will give you a better understanding of what we can do to meet your needs. Contact a Creo representative if you have any questions regarding our tool stack.

Engineering groups are using niche software tools from different vendors to simulate product attributes. Multi-vendor software products can lead to inefficiencies and increase costs. SIMULIA offers a scalable suite unified analysis products that allows all users, regardless their simulation expertise or domain focus to collaborate seamlessly and share simulation data and approved methods without losing information fidelity. Abaqus Unified FEA offers powerful and complete solutions to complex engineering problems across a wide range of industrial applications. Automotive industry engineering groups can consider full vehicle loads, dynamic vibrations, multibody systems and impact/crash using a common model structure and integrated solver technology.

DELOPT is a company that designs, develops and produces embedded systems and electrooptics systems for military as well as civilian applications. Our defense offerings include avionics displays and on board computers, ate’s, high-speed data acquisition system, thermal imaging systems, target trackers, and high-speed data acquisition system. The Automatic Video Tracker, or AVT, receives video from a surveillance camera and tracks the object. It then outputs the location of the object relative to the centre of Field of View of that camera. The AVT can track moving or static objects from a stationary or moving platform. The DIR-SA-900 Series Thermal Imager, developed by DELOPT, is based on a 25 micron pitch 384x288 uncooled microbolometer array that operates at room temperature. New product DIR–SA-910 Series Handheld Thermal Imager.

Cadence®, Sigrity™ PowerDC™, technology provides reliable DC analysis for signoffs of IC packages and PCB designs. This includes electrical/thermal cosimulation to maximize accuracy. PowerDC technology quickly detects areas of excessive IR drop and areas of high current density and thermal hotspots, minimizing your design's chance of failure. Automated setup of DC simulations using PowerTree™ data (source/sink définitions) captured at the schematic phase of the design process. Identifies highly resistive routing neck downs that are difficult to locate and determines which one of thousands will fail under stress. Determines whether it is possible to reduce the plane layers without increasing thermal reliability risk or DC. With a unique block-diagram results view and a variety of visualization options, this article considers what-if improvements.

PV F-CHART is a comprehensive program for photovoltaic system analysis. The program gives hourly average performance estimates for every hour of the day. These calculations are based on methods developed by the University of Wisconsin. They use solar radiation to account for statistical variation in radiation and load. Weather data is available for more than 300 locations. Additional data can be added to include hourly load profiles, statistical load variation, time of day rates for buy/sell, and life-cycle economics with cashflow and parameter variation.

Every project is difficult, but the geotechnical analysis does not have to be. PLAXIS 2D offers fast computations. Advanced finite element and limit equilibrium analysis of rock and soil deformation and stability. Also, soil structure interaction, groundwater and heat flow. PLAXIS 2D, a powerful and easy-to-use finite-element software for 2D analysis and stability in geotechnical and rock mechanics, is available. PLAXIS is used by the top engineering firms and institutions in civil and geotechnical engineering. PLAXIS 2D can be used for many applications, including excavations, foundations, embankments, and foundations, as well as tunneling, mining and oil and gas extraction. PLAXIS 2D provides all the necessary tools to perform safety analysis and deformation of soil and rock. It does not need to take into account creep, steady-state groundwater, thermal flow, consolidation analysis or any other time-dependent effects.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

SOLIDCast Casting Simulator software is the most widely used pc-based solidification model system and cast design software in the casting industry. SOLIDCast was developed by analyzing and focusing real-time issues and problems when designing and making solid castings. The Casting Simulation software developers are not academic software engineers. They have real experience in the casting industry and foundries. Since 1985, they have used their experience to improve SOLIDCast's Casting Simulation software as well as the SOLIDCast product family. SOLIDCast is the most practical software for the casting industry because of their combined experience in Software engineering as well as foundries.

PoligonSoft offers a suite of advanced simulation software designed to enhance and refine the process of metal casting. This software suite empowers users to anticipate potential defects in the final product. Key Analysis Features Include: Fluid Flow during Pouring Formation of both Large and Microscale Porosity Stresses that Remain After Solidification Distortions and Shape Changes Development of Fractures at Various Temperatures Fluid Pressures Erosion of the Mold Material Our software stands out for its ability to streamline production, reduce material waste, and eliminate the need for repeated designs, thereby ensuring that the production cycle is optimized from the start. PoligonSoft's analytical capabilities are built upon three fundamental systems: fluid dynamics, heat transfer, and mechanical stresses. These, combined with an array of advanced features, facilitate the simulation of a wide range of casting methods, including specialized techniques.

USIM PAC is a steady state process modeling and simulation program that can be used to optimize industrial processes. USIM PAC can simulate, model, and balance all streams and units of your processing plant from one interface. USIM PAC is a special engineering software. It is based on the detailed and configurable characterisation of material. It is especially useful if you work with solids or complex mixtures that are difficult to describe as pure substances. Empower engineering decisions. Your processing plant's efficiency and profitability will increase. You will be safer, faster, and more efficient. USIM PAC is a comprehensive software platform that allows for the simulation and modeling of industrial processes. It can perform simulation, data reconciliation and mass balancing, as well as flowsheeting, equipment size, economic and environmental calculations, and off-line optimization in one environment for the entire plant or a portion thereof.

Beyond traditional RF simulation, design, analyze, verify radio frequency integrated circuits. Design and verification can be done with confidence using both nonlinear and steady-state solvers. Complex RFICs can be validated faster using wireless standard libraries. Verification of IC specifications via RF simulation must be done before taping out an RFIC. Simulators can simulate the effects of layout parasitics, complex modulated signal, and digital control circuitry. PathWave RFIC Design allows you to simulate in both frequency and time domains and can bring your designs to Cadence Virtuoso. Simulate components on silicon chips accurately. Optimize designs using sweeps and load-pull analysis. Incorporate RF designs into the Cadence Virtuoso environment. Performance can be increased with Monte Carlo and yield analysis. Safe operating area warnings simplify debugging. Use the most recent foundry technology right away.

Simufact welding is a modular product line that provides extensive functionality for modeling the elastic-plastic behavior and structural weld simulation. The software can be used to simulate different welding processes. Simufact Welding allows you to simulate a wide variety of thermal joining processes using structural welding simulation. This includes brazing, arc and beam welding processes. Simufact Welding also allows you to model heat treatment, variations of cooling, unclamping setups, and mechanical loading of welded structures.

Cableizer is an electrical, mechanical and thermal cable design software package. Cableizer is a web-based application: it is inexpensive, widely available and customizable. It also has better interoperability and is easier to maintain and install than a desktop program. Property • Software-based cable design up to 500kV! • Calculations of cable mass, heat of burning, CO2, price etc. Calculation of cable pull and rated current • Environmental calculations including magnetic field and increase in ground temperatures • Web-based, without installation or dongle but with automatic updates Share links directly with customers to collaborate

ExacTrac Dynamics unites the power and precision from cutting-edge tracking technology. High-precision treatments are available for a wide variety of patient positioning and monitoring workflows, including cranial or prostate. The revolutionary thermal-surface camera technology in this all-in-one system works in tandem with real time X-Ray tracking to provide extraordinary accuracy. The 4D Thermal Camera creates an extremely accurate and reliable hybrid thermal-surface by linking the patient's heat signature with their 3D surface reconstruction. This is possible by acquiring 300,000 3D surfaces points and matching them to the heat signal generated from the thermal camera. This creates another dimension to track their position.

RS2 allows you to easily analyze stress/deformation and stability of any project, regardless of whether it is above ground or below ground. RS2's integrated Seepage Analysis Tool allows you to factor in groundwater flow for both steady-state and transient conditions. Automate your slope stability analysis using shear strength reduction. This performs a finite element analyze to determine the critical strength reduction factor. You can analyze embankments using slope stability, groundwater leakage, consolidation, or dynamic analysis. Groundwater and dynamic analysis tools are available in RS2. There is also a large library of advanced constitutive models that can be used to capture the sudden loss in strength caused by liquefaction. This tool is suitable for both underground and open-pit excavations. It can analyze stability, stress/deformation and bench design. It also supports the design and support of underground caverns.

Ansys Mechanical is a top-of-the-line finite element solver that can be used to improve your modeling. It has structural, thermal, acoustics and transient capabilities. Ansys Mechanical allows you to solve complex structural engineering issues and make faster design decisions. The suite includes finite element analysis (FEA), which allows you to automate and customize solutions for structural mechanics problems. You can also parameterize these solvers to analyze multiple design scenarios. Ansys Mechanical offers a wide range of analysis tools and is a dynamic tool. Ansys Mechanical provides a dynamic environment that allows you to connect additional physics and prepare geometry for analysis. Engineers of all levels can access the intuitive and customizable interface to quickly and easily find answers. Ansys Mechanical provides an integrated platform that uses finite elements analysis (FEA), for structural analysis.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.