Alternatives to PROTO

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

It allows you to design and test circuits in a flexible way, allowing you to try all "what if" scenarios. You don't have to worry about faulty components or bad connections. CircuitLogix supports mixed-signal, analog, and digital circuits. Its proven SPICE simulation provides accurate results that you can trust. 3DLab, which is included in both versions of CircuitLogix, is a virtual reality lab environment that is designed to closely mimic the appearance and functionality actual devices and instruments. 3DLab includes approximately 30 different devices, including switches, meters and lamps, as well as resistors, capacitors, inductors and fuses.

One animated circuit is equivalent to a thousand equations or diagrams. The schematic is accompanied by animations of voltages and currents. This gives a great insight into the operation of the circuit. The real-time simulation engine was custom-built to be fast and interactive. Simulate everything from simple logic gates and resistors to complex transistor-level designs and mixed-signal circuits with just one click. You can adjust potentiometers and LED current-limiting resistors while the simulation is running. Your changes will be reflected in real-time. The mini-waveforms that appear on top of the schematic wires are different for digital and analogue signals. Digital wires are color coded, while constant analog voltages are shown in numbers. In the XY mode, any pair of time domain signals can be plotted. The grid ticks and oscilloscope scale are automatically updated to convenient values when the data changes.

PathWave ADS provides integrated design guidance via templates to make it easier to get started. It is easy to find the part that you need with the extensive component libraries. Automatic sync allows you to visualize the physical layout and create schematic designs. Data allows teams to visualize whether their designs are meeting specifications. PathWave ADS's data display and analytics capabilities produce graphs, charts and diagrams that will give you design confidence. With wizards, templates, and design guides, you can quickly accelerate your design. The entire design flow includes schematic, layout and circuit. As frequency and speed increase on printed circuit boards (PCBs), signal and power integrity become more important. Electronic device failures can be caused by transmission line effects. To simulate the board accurately, it is necessary to model vias, traces, and interconnects.

Our online circuit simulation bridges the gap between theory, and practice through an intuitive interface. It allows you design, simulate and share electronic circuits, while observing the interaction of components in real time. Directly manipulating the behavior of circuits makes learning more engaging. DCACLab is a powerful tool for educators. It enhances their lessons with interactive diagrams, live demonstrations, and video. Students can experiment and learn in a safe environment, which will lead to a better understanding of electronics. DCACLab turns frustration into hands-on understanding and learning. Discover the power of an interactive multimeter. It provides a realistic and enriching learning experience with its functions to measure ohms, voltages, and resistances. With ease and understanding, dive into the world of electronic.

Multisim™, a software that integrates industry-standard spice simulation with an interactive schematic environment, allows you to instantly visualize and analyze electronic circuit behavior. Its intuitive interface allows teachers to reinforce circuit theory and improve theory retention throughout their engineering curriculum. Multisim™, which adds powerful circuit simulation and analysis into the design flow, helps researchers and designers decrease iterations and save development costs. Multisim™, for Education, is circuit teaching software for power electronics courses and labs. Multisim™, provides engineers with the SPICE simulation and analysis tools and PCB design tools to quickly iterate on designs, improve prototype performance, and speed up prototyping.

TopSpice is a true analog/digital/behavioral mixed-mode circuit simulator for the PC. It is the most advanced SPICE simulation in its price range. It also offers compatibility, an integrated design environment that is easy to use, from schematic capture to graphic waveform analysis. TopSpice allows you to design using either text netlists (SPICE) or schematic drawings. All design and simulation features are available in either the schematic editor or netlist editor. TopSpice comes with a full-featured mixed mode mixed-signal simulator that can simulate circuits containing any combination of analog devices and digital functions, as well as high-level behavioral block. TopSpice allows you to verify and optimize the design of your system down to the transistor.

TINACloud is a cloud-based, multi-language version of TINA that runs in your browser. It can be accessed from anywhere in the world. TINACloud is available for a fraction the price of TINA. If you buy a license to download TINA, we offer a special bundle that includes TINACloud and all new private licenses. This page is dedicated exclusively to TINACloud. Click here for more information about the TINA offline software that you can download and install on your computer. TINACloud is a powerful online circuit simulator that can be used to analyze and design analog, digital, VHDL and mixed electronic circuits. It also allows you to test microcontroller applications and RF, communication and optoelectronic devices.

Electronic designs are becoming more complex, making them harder to detect errors. These errors can result in high costs and hundreds or hours of work. It is important to detect these errors early on in order to prevent damage. In many cases, these mistakes are only discovered during the testing phase or on the customer's premises. BQR CircuitHawk, a unique and powerful (patent-based) tool for electrical circuit stress analysis and design error detection is available. CircuitHawk detects errors in the design phase before layout and production. So, during the final verification, no errors in schematics, connectivity, or stress are detected. CircuitHawk reduces design cycles and the time to market. This saves money and improves corporate reputation. CircuitHawk integrates design error detection, thermal, MTBF, and service life predictions at the schematic level before PCB layout and manufacturing.

Synopsys HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

EAGLE (electronic design automation) software allows printed circuit board (PCB), designers to seamlessly connect schematic diagrams and component placement. It also includes comprehensive library content. EAGLE offers a variety of PCB layout tools that will help you bring your design to life. Drag and drop reusable blocks between your projects. To ensure your schematic stays on track, validate your design using a complete set electronic rule checks. All changes are automatically synchronized between your layout and schematic, so you can concentrate on the creative process. You can control your design flow and avoid any unexpected surprises by using fully customizable PCB design rules. You can rest assured that your next design will be completed with worry-free libraries. Our growing catalog allows you to find and place parts dynamically.

Easy-wire mode allows you to connect elements with less clicks, and therefore less frustration. The unit-aware evaluation of expressions allows you to plot arbitrary signals, such as differential or power dissipation. You can design and analyze circuits faster with in-browser simulation. This allows you to test your circuit before you ever pick up a soldering tool. Advanced simulation capabilities include frequency domain (small signal simulation), stepping circuit parameters across a range, arbitrary Laplace function blocks, etc. With configurable plotting window, vertical and horizontal marker, and calculations for signals, you can work with multiple signals with ease. With just a few mouse clicks, you can create generic rectangular symbols to represent IC or system level wiring diagrams.

The MPLAB®, Mindi™, Analog Simulator reduces design time and design risks by simulating analog circuits before hardware prototyping. The simulation tool uses a SIMetrix/SIMPLIS simulation platform, which allows for the use of SPICE and piecewise linear modeling. This simulation environment can be used to simulate a wide range of simulation requirements. This simulation interface can be paired with Microchip's proprietary model files to model specific Microchip components as well as generic circuit devices. This simulation tool runs locally on your computer. The simulation tool is free to download and does not require an Internet connection. Also, the simulation run time does not depend on remote servers. The simulation results are fast and accurate. The simulation tool can be run directly on your PC.

It is based upon a complete representation for the qubit state, but avoids the explicit representation in terms of matrices of gates and other quantum operation. Intel-QS uses the MPI (message-passing-interface) protocol to handle communication between the distributed resources used to store and manipulate quantum states. Intel-QS is built as a library that, when linked to an application program, allows the user to benefit from the high-performance implementations of circuit simulations. The library can run on a wide range of systems, including laptops and HPC server systems.

The graphical interface of the schematic capture tool allows you to explore schematics, produce simulation results and further explore them through the waveform viewer. The speed at which you can grasp the circuit, its correctness and its limitations is crucial to circuit design. LTspice is faster than many other simulation tools, and allows you to iterate designs in a short time. The keyboard shortcuts in LTspice are a quick and easy way to access commands that you would normally only be able to access by clicking on the menu or toolbar. Our vast collection of technical resources covers a wide range LTspice-related topics. Learn how to add third-party model, work with symbols and more.

Over 1 million real-time updated parts have been created. This allows you to focus on the design and you can also create or import your common libraries. EasyEDA, China's largest distributor of electronic components, supports direct links to more that 200,000 in-stock components at LCSC. Designers have access to stock, prices, and orders at any stage of design. It offers the same features as the online version but has more design areas. We have made many improvements to the product, so we recommend it. It is easy to use. You can use it faster if you have previously used other PCB tools. You can design faster, lighter, and less resource-hungry. Register and log in to use the service, there is no activation required. Local backup automatically with document retrieval at any time. You will also have backups on the cloud server. This doubles your data security.

There are many circuit simulators on the market. Just look at their ads: industry standard, high performance, fast, and extremely fast. SPICE), easy-to-use, highly intuitive. Try it out yourself to see if the tool is worth your time. Many NL5 users have already done this. I hope they'll share their inspiring stories soon. What can you expect from NL5? It is neither a replacement for SPICE nor a new SPICE. NL5 is superior for some tasks, good for others, and not suitable for some.

It is a full-featured, accurate design environment that combines speed and accuracy. It can simulate power supply designs 10-50x faster than SPICE. SIMetrix Classic has all the features and uses the same GUI, including its hierarchical diagram editor and waveform view. Locates the steady-state operating point of a switch system without having the transient startup conditions simulated. Conversion of SPICE transistors and diodes to SIMPLIS format. Converts SPICE by running a SPICE Simulation to extract parameters. The advanced digital library includes a variety of digital functions, such as counters ADCs DACs.

The Electromagnetic simulation (EM) gives you insight before physical prototyping. You can customize EM simulations to increase speed and accuracy. Integrate EM analysis into your circuit simulations. EM simulations can take several hours to run. Integrating your EM simulation software and PathWave circuit design software can reduce import and export times. To maximize efficiency, integrate EM analysis and circuit simulations. 3D EM solid modeling environment to create arbitrary 3D objects or import existing 3D models from other CAD settings. Prerequisite to prepare a 3D geometry for 3DEM simulation. This includes defining ports, boundary conditions, and material properties. 3D EM solid modeling and Finite Difference Time Domain simulator. Compliance testing for Specific Absorption Rates (SAR) or Hearing Aid Compatibility.

TINA-TI offers all the traditional DC, transient, and frequency domain analyses of SPICE plus much more. TINA's extensive post-processing capabilities allow you to format the results in any way you like. Virtual instruments let you select input waveforms, and probe circuit nodes voltages and waveforms. TINA's Schematic Capture is a quick and easy way to get started. TINA-TI requires around 500MB. It is easy to install and can be uninstalled if desired. We bet you won't. TINA is a Texas Instruments-exclusive product from DesignSoft. This complimentary version is fully-functional but does not include some of the features that are available in the full version.

Ansys Exalto, a post-LVS RLCk extractor software solution, allows IC designers to capture unknown crosstalk between different blocks in their design hierarchy. It extracts lumped-element parasitics from the design hierarchy and generates an accurate model for electrical and magnetic coupling. Exalto interfaces well with most LVS tools, and can be used in conjunction with the RC extraction tool you choose. Ansys Exalto post LVS RLCk extraction allows IC designers to accurately predict electromagnetic and substrate-coupling effects for signoff on circuits previously "too large to analyze." The extracted models can be back-annotated to any schematic or netlist and support all circuit simulators. Modern silicon systems have seen a rise in RF and high speed circuits. This has made electromagnetic coupling a first-order effect that must be accurately modelled to ensure silicon success.

Since over 25 years, PSIM has been the leading simulation and design software in power electronics and motor drives. PSIM's intuitive, user-friendly GUI and robust simulation engine are the perfect solution for users to meet their simulation and design requirements. PSIM can perform quick power converter losses calculations, motor drive efficiency calculation, conducted EMI analysis and analog/digital controls. PSIM offers automatic embedded code for rapid control prototyping. With PSIM's Design Suites, users are able to design power supplies, electromagnetic (EMI) filters and motor drive systems quickly.

Pharos combines Ansys’ unparalleled EM engine power with a proprietary circuit simulation engine to perform coupling analysis. It also provides a ranking of potential EM-crosstalk aggressors per victim. Designers can identify the most vulnerable nets to help them make design decisions that will manage EM crosstalk and reduce risk. Pharos combines an unparalleled extraction engine power with a built in simulation engine to perform EM analysis. It also ranks potential EM crosstalk aggressors per victim network. This allows designers to concentrate on the most important nets in the design. It is difficult, if not impossible to identify all EM crosstalk vulnerable victim/aggressor net pair due to increasing design complexity and the wide range of magnetic field interference.

Fusion 360 brings together design, engineering, electronics and manufacturing in one software platform. Get integrated CAD, CAM, CAE & PCB on a single development platform. EAGLE Premium, HSMWorks and Team Participant are also included. You also have access to consumptive services such as cloud simulation, generative design, and cloud rendering. A comprehensive range of modeling tools is available to help you design products. You can ensure the form, fit and function of your products using a variety of analysis methods. You can create and edit sketches using sketch constraints, dimensions, as well as a powerful suite if sketch tools. Edit and repair imported geometry from non native file formats. You can make design changes without worrying too much about time-based features. Edit complex parametric surfaces to repair, patch or design geometry. You can create history-based features such as extrude, revolve and loft that are updated with design changes.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

Today's companies are faced with complex design challenges as well as tight budgets. eCADSTAR is much more than a PCB layout software. It includes simulation, 3D MCAD integration and wire harness support. All built on the most recent technology to provide enterprise-level performance at a reasonable cost. eCADSTAR's intuitive UI makes it a compelling choice for designers. eCADSTAR's design capabilities can be leveraged to simplify and accelerate your design process. The digitally connected library, intuitive schematic capture and tools to accelerate PCB Layout Engineering allow engineers to spend less time manipulating the tool, and more time doing what they love: innovating creative solutions for today’s technological challenges. The test plan is one of the most tedious parts of the design process. Without adequate upfront simulation, validation can be expensive in both time and money. eCADSTAR's capabilities for Spice simulation and SI/PI analysis deliver test cycle time reductions.

Simulink allows you to simulate your system before you move on to hardware. You can explore and implement designs you wouldn't normally consider without having to code C, C++, or HDL code. You can explore a wide range of design options by modeling the system under testing and the physical plant. To simulate the behavior of all components of the system, your entire team can use a multi-domain environment. Your simulations can be packaged and shared with clients, suppliers, or collaborators. You can reduce the cost of prototypes by testing your system in conditions that are too risky or too time-consuming. Rapid prototyping and hardware-in-the loop testing can validate your design. You can trace your design from requirements to code. Instead of writing thousands upon lines of code manually, generate high-quality C or HDL code automatically. This code behaves in the same way that Simulink's model. You can then deploy it directly to your embedded processor or FPGA/ASIC.

Proteus was developed back in the days MS-DOS. After 30 years of continuous development, we are proud to present one of the most efficient and cost-effective PCB tools available. Our philosophy has been to continuously improve and innovate. This resulted in a modern software suite that is packed with powerful, time-saving features that will help you design PCBs more quickly. Proteus purchase is just the beginning of a long-lasting business relationship. A world-class technical support service is included in the price of the software. Each professional purchase will be assigned a member of our team as your technical support contact. This allows you to easily ask questions and get direct access to Labcenter support. Although we may not be able solve all your problems immediately, we will do our best. Our success is due to our customers.

The schematic editor allows you to create unlimited designs. There are no paywalls for unlocking features. A built-in schematic editor and an official library of schematic symbols will help you quickly get started with your designs. Professional PCB layouts can be made with up to 32 copper layers. KiCad now includes a push-and-pull router that can route differential pairs and adjust trace lengths interactively. KiCad also includes a 3D viewer that you can use to view your design in an interactive canvas. To inspect details that are difficult or impossible to see in a 2D view, you can rotate and pan around. Multiple rendering options make it possible to change the board's aesthetic or hide and show certain features. The schematic capture in KiCad is fast and efficient. It also includes all the tools necessary to do so. The interface is focused on productivity. As large designs can be broken into hierarchical subsheets, there are no limits to their complexity.

RFICs can be designed, analyzed, and verified using a variety of simulation methods. Gain confidence using steady-state and nonlinear solutions for design and verification. Wireless standard libraries speed up the validation of complex RFICs. Model silicon chips accurately. Optimize designs using sweeps and load pull analysis. Simulate RF designs using Cadence Virtuoso or Synopsys Custom Compiler. Monte Carlo and yield analyses can be used to increase performance. Early in the design phase, assess the error vector magnitude (EVM), for the latest communication standard. Use the latest technology in foundries immediately. Early in the RFIC development phase, it is essential to monitor system IC specifications like EVM using RF simulation. Simulations include effects from parasitics on layouts, complex modulated signal, and digital circuitry. Keysight RFPro Circuit allows you to simulate in the frequency and time domain.

Microwave Office is a powerful tool for the design of passive components, such as filters, couplers and attenuators. It also supports active devices that operate under small-signal conditions, such as buffer amplifiers and low noise amplifiers. The linear configuration allows for simulation of S parameters (Y/Z/H/ABCD), linear stability, noise figure and return loss/voltage-standing-wave ratio (VSWR) as well as real time tuning, optimization and yield analysis. All E-series Microwave Office Portfolios include synchronous schematic/layout editors, 2D/3D viewer, libraries of high-frequency transmitted transmission models, surface mount vendor component RF model with footprints and measurement-based simulations. Microwave Office PCB supports analysis of RF/microwave systems with the APLAC HB Simulator and its powerful multirate HB, time-variant simulation engine and transient-assisted-HB.

EMWorks offers the best-in-class electromagnetic simulation software to support electrical and electronic design. It also has multiphysics capabilities. The company's products can be seamlessly integrated in Autodesk Inventor® and SOLIDWORKS. Applications include power electronics, antennas and RF components, signal integrity and power of high speed interconnects, and electromechanical and power electronics. EMS is an electromagnetic field simulation program that can be used to optimize electromagnetic and electromechanical devices, such as transformers and electric motors, actuators and sensors within Autodesk®, and Inventor®.

Fritzing is a free open-source hardware initiative that makes electronic components accessible to anyone as a creative tool. We offer a tool, a website and services in the spirit Arduino and Processing. This creates a creative environment that allows users to document and share their prototypes with others, teach electronic in a classroom and layout and manufacture professional circuit boards. Fritzing is available on Windows, macOS and Linux. With Fritzing Fab, you can quickly and easily turn your circuit into a custom-made PCB. Fritzing will only be a creative platform when many people use it to share and learn. Share your projects and let us know if it meets your needs. Fritzing provides several ways to create the part you need. Parts are organized in "bins" that can be accessed through the parts palette.

Multipurpose, full-wave 3D electromagnetic (EM), simulation software for designing, simulating and optimizing high-frequency electronic products, such as antennas, components and interconnects. Ansys HFSS 3D electromagnetic (EM), simulation software is used to design and simulate high-frequency electronic products, such as antennas and antenna arrays, RF and microwave components, high speed interconnects and filters, connectors and IC packages. Ansys HFSS software is used by engineers around the world to design high-frequency, fast electronics for communication systems, advanced driver assistance system (ADAS), satellites, IoT products, and other areas. Engineers can address complex EMI, RF, microwave, IC and PCB problems with HFSS's unmatched capability. Ansys HFSS simulation suite includes a wide range of solvers that can be used to solve diverse electromagnetic problems.

Ansys Icepak solves thermal management problems using CFD. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak offers powerful electronic cooling solutions using the industry-leading Ansys Fluent CFD solver to perform thermal and fluid flow analysis of integrated circuits, packages, printed circuit board (PCBs), electronic assemblies and enclosures. Ansys' Icepak CFD solution uses the Ansys Electronics Desktop GUI (GUI). Perform heat transfer analysis conjugated with conduction, convection and radiation. Advanced capabilities include laminar and turbulent flow modeling, species analysis, including radiation and convection. Ansys PCB Design Solution allows you to simulate PCBs and ICs and accurately evaluate a system.

These values are used to confirm the intent of the design and provide information that supports the design. They also confirm a balanced, protected power distribution system, including short circuit current, system grounded arrangement, voltage hierarchy, and connection to the grid. PowerCalc is a new tool that allows you to design the power distribution system for a building. It is a powerful tool that generates database-driven results, resulting in fewer design hours, errors, and process hiccups. PowerCalc uses its fully-populated proprietary database to select the appropriate values for compliance with the NEC, other applicable codes, and engineering standards. This database also includes the NEC lookup tables. More information on inputs and outputs

Beyond traditional RF simulation, design, analyze, verify radio frequency integrated circuits. Design and verification can be done with confidence using both nonlinear and steady-state solvers. Complex RFICs can be validated faster using wireless standard libraries. Verification of IC specifications via RF simulation must be done before taping out an RFIC. Simulators can simulate the effects of layout parasitics, complex modulated signal, and digital control circuitry. PathWave RFIC Design allows you to simulate in both frequency and time domains and can bring your designs to Cadence Virtuoso. Simulate components on silicon chips accurately. Optimize designs using sweeps and load-pull analysis. Incorporate RF designs into the Cadence Virtuoso environment. Performance can be increased with Monte Carlo and yield analysis. Safe operating area warnings simplify debugging. Use the most recent foundry technology right away.

You can go beyond math-based modeling by using a complete RF-aware design process. This workflow includes decades of Keysight measurement science in RF instruments, which is available for all system architects. PathWave System Design is the best platform for prototyping complex RF systems. It offers faster simulation speeds, near-circuit fidelity and libraries for radar, electronic warfare satellite, 5G and WiFi. Plus, it integrates with many partners. Your system designs can only be improved by statistical models for propagation or channels. With the help of tools like STK by AGI, Ansys Company, dynamic kinematic modeling is possible for electronic warfare, radar, satellite, 5G and automotive. Trusted reference libraries based on Keysight measurement science are essential for advanced cellular system designers. Researchers working on the next generation communications signals require a flexible platform to develop and test physical layers.

Altium's PDN Analyzer tool integrates with Altium Designer. This allows you to easily troubleshoot issues such as insufficient or excessive copper or uncontrolled voltage drops. You can also detect marginal voltage at critical power points, copper islands or peninsulas, and other issues that could be present in your PCB power system. PDN is the power system for active circuits on printed circuit boards. This includes all interconnections between the voltage regulator module, the metallization pads and die on integrated devices that are used for supply and return power. The entire length of the power delivery network must meet the IC supply voltage limits. Validating your power budget accurately means taking into account the minimum and maximum device limits, worst case voltage drops, combined return-path currents, and other factors. PDN Analyzer will show you exactly where these problems are.

A specialized tool to analyze IC packages and PCBs for power integrity, EMI, and signal integrity. Solve power delivery systems and high speed channels in electronic devices. SIwave allows you to model, simulate and validate complete power systems and high-speed channels typical of modern high-performance electronic devices. It accurately extracts memory buses and SERDES with multi-gigabit speeds, ensuring product sign-off compliance. SIwave's full-wave extraction of complete power networks (PDN) allows you to verify noise and impedance profiles through automatic decoupling analyses in low voltage designs. SIwave allows you to model, simulate and validate complete power delivery systems and high-speed channels that are typical of modern high-performance electronic designs. It accurately extracts multigigabit SERDES, memory buses and other busses. This allows for product sign-off compliance.

Power Analyzer is a powerful tool that allows you to easily and intuitively visualize voltage distribution, current density, direction of current, and "hot spots". The results will be displayed directly in Altium Designer PCB Editor, so that you can see the interaction between your power grids and the rest of the design. You can quickly identify and solve your DC voltage and density problems during the design process of the plate without any prior knowledge of DC analysis. You can design with confidence knowing that your energy measurements are accurate. Power Analyzer allows Altium Designer to measure voltage and current density or track current at any location, at one end or differential between two locations. Visualize the results as you design. The HTML reports can be configured to record simulation data with voltage and current margins and power consumption data.

Easily perform electrical stress analysis, MTBF calculation, component derating, and FMECA analysis within your ECAD during board design. Key Features: • Uses cutting-edge AI technologies for robust and efficient design. *Seamless Integration with leading ECAD Software for streamlined workflows and real-time analyses. *Includes automated circuit strain calculators to speed up design processes. • Performs detailed analysis on electrical stress derivation for components. *Utilizes the results of thermal simulation to improve derating accuracy. *Provides thermal resistance and stress metrics for 3D Thermal Simulations. *Identifies EOS violations using Pareto analysis, and detailed reports on overstress and overdesign. *Recommends design changes to effectively resolve overstress problems. *Utilizes derating guidelines for optimal component performance. *Automates FMECA Analysis

Ansys Totem SC is the industry's trusted leader in power noise and reliability signoffs for analog and mixed signal designs that are built on cloud-native elastic computing infrastructure. Ansys Totem SC is the industry's most trusted standard for voltage drop and electromigration multiphysics signoff solutions for transistor-level and mixed signal designs. Totem-SC has a proven track record of thousands upon thousands of tapeouts. Its cloud-based architecture gives it speed and capacity to handle full-chip analyses. All major foundries have certified signoff accuracy for all finFET nodes below 3nm. Ansys Totem SC is a transistor level power noise and reliability analysis platform that can analyze analog mixed-signal IP as well as fully custom designs. It generates IP models for RedHawk SC-level power integrity signoff and compact chip models for power delivery networks at the chip- and system-level. Industry-proven, foundry-certified analog/mixed-signal EM/IR solution.

FlexLogger allows you to create flexible, scalable data-logging system with NI DAQ hardware. No programming is required. You can create sensor-specific configuration workflows that allow you to quickly set up, visualize and log a variety of synchronized measurements from analog and digital sensors, as well as vehicle communication buses. You can also generate voltage and current or digital signals to drive actuators and control set points. FlexLogger automatically saves metadata about your test configuration. This allows you to quickly trace test results and compare them across multiple tests. The integrated data viewer allows you to interactively view test results and draw conclusions. FlexLogger automatically synchronizes mixed signal measurements so that you can accurately analyze data across different sources to ensure physical components work according to design specifications.

The AFS Platform is foundry-certified and delivers SPICE accuracy of nm, 5x faster than traditional simulations, and >2x faster compared to parallel SPICE simulators. The fastest nm platform for circuit verification of analog, RF and mixed-signal circuits. Now includes the new eXTreme Technology. AFS eXTreme is 3x faster and has a 100M element capacity for large post-layout circuits. Supports all leading solvers. Best-in class usability allowing maximum reuse and reuse of verification infrastructure. Verification coverage is improved by advanced verification and debugging capabilities. Improved design quality and reduced time to market. SPICE high-sigma accuracy. 1000x faster than brute force simulation Easy to use and deploy. AFS eXTreme is available for no additional charge.

Real-time collaboration, a simple simulator and forkable community content make it easier to build hardware more efficiently. Modern sharing, permissions and an easy-to use version control system allow you to harness collective intelligence. We believe in open-source. Flux's ever-growing library of schematics and parts makes it easy to get started quickly. Finally, a programmable simulation that doesn't require a PHD. You can view your schematic online before you start building. Flux is the place to go for great hardware projects, no matter if you're designing hardware for the next Mars mission or a simple circuit board. Flux is a browser-based, end-to-end electronic design platform that breaks down all barriers. Flux is doing something new and we're doing it in a unique way. It's called building openly. Join our community of makers, engineers, and entrepreneurs who are passionately interested in improving hardware design tools.

The CODESYS OPC UA Server provides a scalable solution to runtime systems that best fits the controller's resources. The component is platform independent and can be easily integrated into your current runtime system. The product targets OEM customers and allows for the integration of OEM-specific objects through the integrated provider interface. You can use various functions, such as syntax error check, syntax error check, debugging, and simulation to make your development more efficient. Compiler to optimize powerful machine code of the HXCPU. Project trees allow for the collective management of devices and tasks as well as programs of application.

SOLIDWORKS PCB allows you to design Printed Circuit Boards (PCBs), quickly and with the unique collaboration between electrical design teams. It provides a clear advantage in areas where ECAD-MCAD collaboration can be crucial for the overall success of electronic product development. Single board rigid-flex PCB design is possible by defining rigid-flex regions, layers and stack thicknesses. To ensure correct layout, the rigid-flex layer stack regions are defined using bend lines and angles. SOLIDWORKS PDM-based design software and the SOLIDWORKS PDM Connector allow you to manage your project, design files, and documentation. Securely store and index design data to make it easy to find, eliminate data loss and version control concerns, and collaborate from multiple locations. Unmatched ECAD/MCAD integration and collaboration with SOLIDWORKS, which unifies design data.

In markets where safety of welded assemblies are essential, analysis using TRANSWELD®, offers a global solution to anticipate welding defect. Our simulation software integrates multiple physical models to simulate the actual behavior of the metal when it is in a liquid/mushy condition to perform a comprehensive analysis of the material's evolution. TRANSWELD®, enables the study of the microstructure in the solid-state assembly. You can then ensure the conformity without having to go through the prototyping phase. Our software is 100% predicative. You can observe welding processes numerically using real conditions. You can, for example, visualize the heat source movements during the simulation of laser or arc welding.

Complex technical systems, such as machines and manufacturing plants are common. They are made up of many components and subsystems. These systems are often based on different technical domains and more often equipped with sensors and controls. Their dynamic interactions can have a significant effect on safety, performance, comfort, and quality. SimulationX is a single platform that allows you to model, simulate, and analyze technical systems. This includes mechanics, hydraulics and pneumatics, controls, electronics, and controls as well as thermal and magnetic behavior. You will have all the tools you need with comprehensive component libraries that include application-oriented elements.