Alternatives to DCACLab

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

Multisim™, a software that integrates industry-standard spice simulation with an interactive schematic environment, allows you to instantly visualize and analyze electronic circuit behavior. Its intuitive interface allows teachers to reinforce circuit theory and improve theory retention throughout their engineering curriculum. Multisim™, which adds powerful circuit simulation and analysis into the design flow, helps researchers and designers decrease iterations and save development costs. Multisim™, for Education, is circuit teaching software for power electronics courses and labs. Multisim™, provides engineers with the SPICE simulation and analysis tools and PCB design tools to quickly iterate on designs, improve prototype performance, and speed up prototyping.

You can learn electronics by using the examples in PROTO application and trying out many components. You can use transistors, diodes and resistors. You can easily analyze signals using a channel oscilloscope. During simulation you can check voltages and currents as well as many other variables. Check signals using the multichannel oscilloscope, and tune your circuits in real-time. Our app will help you with your Raspberry Pi or Arduino project. You can use PROTO to simulate logic circuits and perform digital electronics analysis.

TINACloud is a cloud-based, multi-language version of TINA that runs in your browser. It can be accessed from anywhere in the world. TINACloud is available for a fraction the price of TINA. If you buy a license to download TINA, we offer a special bundle that includes TINACloud and all new private licenses. This page is dedicated exclusively to TINACloud. Click here for more information about the TINA offline software that you can download and install on your computer. TINACloud is a powerful online circuit simulator that can be used to analyze and design analog, digital, VHDL and mixed electronic circuits. It also allows you to test microcontroller applications and RF, communication and optoelectronic devices.

One animated circuit is equivalent to a thousand equations or diagrams. The schematic is accompanied by animations of voltages and currents. This gives a great insight into the operation of the circuit. The real-time simulation engine was custom-built to be fast and interactive. Simulate everything from simple logic gates and resistors to complex transistor-level designs and mixed-signal circuits with just one click. You can adjust potentiometers and LED current-limiting resistors while the simulation is running. Your changes will be reflected in real-time. The mini-waveforms that appear on top of the schematic wires are different for digital and analogue signals. Digital wires are color coded, while constant analog voltages are shown in numbers. In the XY mode, any pair of time domain signals can be plotted. The grid ticks and oscilloscope scale are automatically updated to convenient values when the data changes.

PathWave ADS provides integrated design guidance via templates to make it easier to get started. It is easy to find the part that you need with the extensive component libraries. Automatic sync allows you to visualize the physical layout and create schematic designs. Data allows teams to visualize whether their designs are meeting specifications. PathWave ADS's data display and analytics capabilities produce graphs, charts and diagrams that will give you design confidence. With wizards, templates, and design guides, you can quickly accelerate your design. The entire design flow includes schematic, layout and circuit. As frequency and speed increase on printed circuit boards (PCBs), signal and power integrity become more important. Electronic device failures can be caused by transmission line effects. To simulate the board accurately, it is necessary to model vias, traces, and interconnects.

Easy-wire mode allows you to connect elements with less clicks, and therefore less frustration. The unit-aware evaluation of expressions allows you to plot arbitrary signals, such as differential or power dissipation. You can design and analyze circuits faster with in-browser simulation. This allows you to test your circuit before you ever pick up a soldering tool. Advanced simulation capabilities include frequency domain (small signal simulation), stepping circuit parameters across a range, arbitrary Laplace function blocks, etc. With configurable plotting window, vertical and horizontal marker, and calculations for signals, you can work with multiple signals with ease. With just a few mouse clicks, you can create generic rectangular symbols to represent IC or system level wiring diagrams.

It allows you to design and test circuits in a flexible way, allowing you to try all "what if" scenarios. You don't have to worry about faulty components or bad connections. CircuitLogix supports mixed-signal, analog, and digital circuits. Its proven SPICE simulation provides accurate results that you can trust. 3DLab, which is included in both versions of CircuitLogix, is a virtual reality lab environment that is designed to closely mimic the appearance and functionality actual devices and instruments. 3DLab includes approximately 30 different devices, including switches, meters and lamps, as well as resistors, capacitors, inductors and fuses.

The graphical interface of the schematic capture tool allows you to explore schematics, produce simulation results and further explore them through the waveform viewer. The speed at which you can grasp the circuit, its correctness and its limitations is crucial to circuit design. LTspice is faster than many other simulation tools, and allows you to iterate designs in a short time. The keyboard shortcuts in LTspice are a quick and easy way to access commands that you would normally only be able to access by clicking on the menu or toolbar. Our vast collection of technical resources covers a wide range LTspice-related topics. Learn how to add third-party model, work with symbols and more.

EAGLE (electronic design automation) software allows printed circuit board (PCB), designers to seamlessly connect schematic diagrams and component placement. It also includes comprehensive library content. EAGLE offers a variety of PCB layout tools that will help you bring your design to life. Drag and drop reusable blocks between your projects. To ensure your schematic stays on track, validate your design using a complete set electronic rule checks. All changes are automatically synchronized between your layout and schematic, so you can concentrate on the creative process. You can control your design flow and avoid any unexpected surprises by using fully customizable PCB design rules. You can rest assured that your next design will be completed with worry-free libraries. Our growing catalog allows you to find and place parts dynamically.

It is based upon a complete representation for the qubit state, but avoids the explicit representation in terms of matrices of gates and other quantum operation. Intel-QS uses the MPI (message-passing-interface) protocol to handle communication between the distributed resources used to store and manipulate quantum states. Intel-QS is built as a library that, when linked to an application program, allows the user to benefit from the high-performance implementations of circuit simulations. The library can run on a wide range of systems, including laptops and HPC server systems.

The MPLAB®, Mindi™, Analog Simulator reduces design time and design risks by simulating analog circuits before hardware prototyping. The simulation tool uses a SIMetrix/SIMPLIS simulation platform, which allows for the use of SPICE and piecewise linear modeling. This simulation environment can be used to simulate a wide range of simulation requirements. This simulation interface can be paired with Microchip's proprietary model files to model specific Microchip components as well as generic circuit devices. This simulation tool runs locally on your computer. The simulation tool is free to download and does not require an Internet connection. Also, the simulation run time does not depend on remote servers. The simulation results are fast and accurate. The simulation tool can be run directly on your PC.

Over 1 million real-time updated parts have been created. This allows you to focus on the design and you can also create or import your common libraries. EasyEDA, China's largest distributor of electronic components, supports direct links to more that 200,000 in-stock components at LCSC. Designers have access to stock, prices, and orders at any stage of design. It offers the same features as the online version but has more design areas. We have made many improvements to the product, so we recommend it. It is easy to use. You can use it faster if you have previously used other PCB tools. You can design faster, lighter, and less resource-hungry. Register and log in to use the service, there is no activation required. Local backup automatically with document retrieval at any time. You will also have backups on the cloud server. This doubles your data security.

The Electromagnetic simulation (EM) gives you insight before physical prototyping. You can customize EM simulations to increase speed and accuracy. Integrate EM analysis into your circuit simulations. EM simulations can take several hours to run. Integrating your EM simulation software and PathWave circuit design software can reduce import and export times. To maximize efficiency, integrate EM analysis and circuit simulations. 3D EM solid modeling environment to create arbitrary 3D objects or import existing 3D models from other CAD settings. Prerequisite to prepare a 3D geometry for 3DEM simulation. This includes defining ports, boundary conditions, and material properties. 3D EM solid modeling and Finite Difference Time Domain simulator. Compliance testing for Specific Absorption Rates (SAR) or Hearing Aid Compatibility.

Synopsys HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

Electronic designs are becoming more complex, making them harder to detect errors. These errors can result in high costs and hundreds or hours of work. It is important to detect these errors early on in order to prevent damage. In many cases, these mistakes are only discovered during the testing phase or on the customer's premises. BQR CircuitHawk, a unique and powerful (patent-based) tool for electrical circuit stress analysis and design error detection is available. CircuitHawk detects errors in the design phase before layout and production. So, during the final verification, no errors in schematics, connectivity, or stress are detected. CircuitHawk reduces design cycles and the time to market. This saves money and improves corporate reputation. CircuitHawk integrates design error detection, thermal, MTBF, and service life predictions at the schematic level before PCB layout and manufacturing.

TopSpice is a true analog/digital/behavioral mixed-mode circuit simulator for the PC. It is the most advanced SPICE simulation in its price range. It also offers compatibility, an integrated design environment that is easy to use, from schematic capture to graphic waveform analysis. TopSpice allows you to design using either text netlists (SPICE) or schematic drawings. All design and simulation features are available in either the schematic editor or netlist editor. TopSpice comes with a full-featured mixed mode mixed-signal simulator that can simulate circuits containing any combination of analog devices and digital functions, as well as high-level behavioral block. TopSpice allows you to verify and optimize the design of your system down to the transistor.

There are many circuit simulators on the market. Just look at their ads: industry standard, high performance, fast, and extremely fast. SPICE), easy-to-use, highly intuitive. Try it out yourself to see if the tool is worth your time. Many NL5 users have already done this. I hope they'll share their inspiring stories soon. What can you expect from NL5? It is neither a replacement for SPICE nor a new SPICE. NL5 is superior for some tasks, good for others, and not suitable for some.

Ansys Exalto, a post-LVS RLCk extractor software solution, allows IC designers to capture unknown crosstalk between different blocks in their design hierarchy. It extracts lumped-element parasitics from the design hierarchy and generates an accurate model for electrical and magnetic coupling. Exalto interfaces well with most LVS tools, and can be used in conjunction with the RC extraction tool you choose. Ansys Exalto post LVS RLCk extraction allows IC designers to accurately predict electromagnetic and substrate-coupling effects for signoff on circuits previously "too large to analyze." The extracted models can be back-annotated to any schematic or netlist and support all circuit simulators. Modern silicon systems have seen a rise in RF and high speed circuits. This has made electromagnetic coupling a first-order effect that must be accurately modelled to ensure silicon success.

TINA-TI offers all the traditional DC, transient, and frequency domain analyses of SPICE plus much more. TINA's extensive post-processing capabilities allow you to format the results in any way you like. Virtual instruments let you select input waveforms, and probe circuit nodes voltages and waveforms. TINA's Schematic Capture is a quick and easy way to get started. TINA-TI requires around 500MB. It is easy to install and can be uninstalled if desired. We bet you won't. TINA is a Texas Instruments-exclusive product from DesignSoft. This complimentary version is fully-functional but does not include some of the features that are available in the full version.

Pharos combines Ansys’ unparalleled EM engine power with a proprietary circuit simulation engine to perform coupling analysis. It also provides a ranking of potential EM-crosstalk aggressors per victim. Designers can identify the most vulnerable nets to help them make design decisions that will manage EM crosstalk and reduce risk. Pharos combines an unparalleled extraction engine power with a built in simulation engine to perform EM analysis. It also ranks potential EM crosstalk aggressors per victim network. This allows designers to concentrate on the most important nets in the design. It is difficult, if not impossible to identify all EM crosstalk vulnerable victim/aggressor net pair due to increasing design complexity and the wide range of magnetic field interference.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

Since over 25 years, PSIM has been the leading simulation and design software in power electronics and motor drives. PSIM's intuitive, user-friendly GUI and robust simulation engine are the perfect solution for users to meet their simulation and design requirements. PSIM can perform quick power converter losses calculations, motor drive efficiency calculation, conducted EMI analysis and analog/digital controls. PSIM offers automatic embedded code for rapid control prototyping. With PSIM's Design Suites, users are able to design power supplies, electromagnetic (EMI) filters and motor drive systems quickly.

Fusion 360 brings together design, engineering, electronics and manufacturing in one software platform. Get integrated CAD, CAM, CAE & PCB on a single development platform. EAGLE Premium, HSMWorks and Team Participant are also included. You also have access to consumptive services such as cloud simulation, generative design, and cloud rendering. A comprehensive range of modeling tools is available to help you design products. You can ensure the form, fit and function of your products using a variety of analysis methods. You can create and edit sketches using sketch constraints, dimensions, as well as a powerful suite if sketch tools. Edit and repair imported geometry from non native file formats. You can make design changes without worrying too much about time-based features. Edit complex parametric surfaces to repair, patch or design geometry. You can create history-based features such as extrude, revolve and loft that are updated with design changes.

Today's companies are faced with complex design challenges as well as tight budgets. eCADSTAR is much more than a PCB layout software. It includes simulation, 3D MCAD integration and wire harness support. All built on the most recent technology to provide enterprise-level performance at a reasonable cost. eCADSTAR's intuitive UI makes it a compelling choice for designers. eCADSTAR's design capabilities can be leveraged to simplify and accelerate your design process. The digitally connected library, intuitive schematic capture and tools to accelerate PCB Layout Engineering allow engineers to spend less time manipulating the tool, and more time doing what they love: innovating creative solutions for today’s technological challenges. The test plan is one of the most tedious parts of the design process. Without adequate upfront simulation, validation can be expensive in both time and money. eCADSTAR's capabilities for Spice simulation and SI/PI analysis deliver test cycle time reductions.

Simulink allows you to simulate your system before you move on to hardware. You can explore and implement designs you wouldn't normally consider without having to code C, C++, or HDL code. You can explore a wide range of design options by modeling the system under testing and the physical plant. To simulate the behavior of all components of the system, your entire team can use a multi-domain environment. Your simulations can be packaged and shared with clients, suppliers, or collaborators. You can reduce the cost of prototypes by testing your system in conditions that are too risky or too time-consuming. Rapid prototyping and hardware-in-the loop testing can validate your design. You can trace your design from requirements to code. Instead of writing thousands upon lines of code manually, generate high-quality C or HDL code automatically. This code behaves in the same way that Simulink's model. You can then deploy it directly to your embedded processor or FPGA/ASIC.

It is a full-featured, accurate design environment that combines speed and accuracy. It can simulate power supply designs 10-50x faster than SPICE. SIMetrix Classic has all the features and uses the same GUI, including its hierarchical diagram editor and waveform view. Locates the steady-state operating point of a switch system without having the transient startup conditions simulated. Conversion of SPICE transistors and diodes to SIMPLIS format. Converts SPICE by running a SPICE Simulation to extract parameters. The advanced digital library includes a variety of digital functions, such as counters ADCs DACs.

Proteus was developed back in the days MS-DOS. After 30 years of continuous development, we are proud to present one of the most efficient and cost-effective PCB tools available. Our philosophy has been to continuously improve and innovate. This resulted in a modern software suite that is packed with powerful, time-saving features that will help you design PCBs more quickly. Proteus purchase is just the beginning of a long-lasting business relationship. A world-class technical support service is included in the price of the software. Each professional purchase will be assigned a member of our team as your technical support contact. This allows you to easily ask questions and get direct access to Labcenter support. Although we may not be able solve all your problems immediately, we will do our best. Our success is due to our customers.

The schematic editor allows you to create unlimited designs. There are no paywalls for unlocking features. A built-in schematic editor and an official library of schematic symbols will help you quickly get started with your designs. Professional PCB layouts can be made with up to 32 copper layers. KiCad now includes a push-and-pull router that can route differential pairs and adjust trace lengths interactively. KiCad also includes a 3D viewer that you can use to view your design in an interactive canvas. To inspect details that are difficult or impossible to see in a 2D view, you can rotate and pan around. Multiple rendering options make it possible to change the board's aesthetic or hide and show certain features. The schematic capture in KiCad is fast and efficient. It also includes all the tools necessary to do so. The interface is focused on productivity. As large designs can be broken into hierarchical subsheets, there are no limits to their complexity.

Data scientists need innovative and efficient turn-key solutions. For quantum engineers, powerful circuit building blocks. Turn-key implementations of algorithms for data scientists, financial analysts, engineers. Explore problems in binary optimization and machine learning on simulators and real hardware. You don't need to have any prior experience in quantum computing. To load classical data into quantum states, use NISQ data loader devices. Circuit building blocks are available for linear algebra with distance estimation or matrix multiplication circuits. You can create your own algorithms using our circuit building blocks. You can get a significant performance boost with D-Wave hardware. Also, the latest gate-based improvements will help you. Quantum data loaders and algorithms offer guaranteed speed-ups in clustering, classification, regression.

Cirq is a Python library that allows you to write, manipulate, and optimize quantum circuits. Then, you can run them on quantum simulators and quantum computers. Cirq is a Python software library that provides useful abstractions to deal with noisy intermediate-scale quantum computer systems, where the details of hardware are crucial for achieving state-ofthe-art results. Cirq has built-in simulations for both wave functions and density matrices. These can handle noisy quanta channels using monte-carlo or full matrix simulations. Cirq also works with the state-of-the art wavefunction simulator qsim. These simulators can also be used to simulate quantum hardware using the quantum virtual machines. Cirq is used by Google to run experiments on its quantum processors. You can learn more about the latest experiments, and download the code so you can run them yourself.

Eaton's easySoft software can be used to program easy controllers or displays. The software allows for circuit diagram input and editing, and can display the diagrams in the format desired. A built-in offline simulation tool allows users the ability to test a circuit before it is put into service. It is used by users who are programming, configuring, and defining parameters. It also creates visualization functions for MFD displays. Existing programs created with the previous series (easy500/700/800), can be easily transferred to the easyE4 PCL with automatic conversions of visualizations using easySoft 7. Eaton's goal to improve your product knowledge, troubleshooting skills and safe operation of machinery control products is to help you. Eaton offers a variety of self-guided, instructor-led, and eLearning training options to suit your individual needs.

Corporate trainers and professors at business schools rate dynamic simulations as the best method of experiential learning. Our simulations have been proven to be useful in revealing the connections between strategy, operating decisions, and performance outcomes. The simulation can also be used as a practice area for improving skills in observing, assessing, and engaging in productive conversations. Business simulations should be as close as possible to the real world in order to provide the best management learning experience. Our simulations are built using dynamic simulation modeling platform that captures non-linear relations, time delays, causal relationships and causal relationships to realistically assess the effects of team decisions on business outcomes.

Forum8's interactive VR Design Studio* software is used by hundreds of research and urban planners as well as transportation authorities, vehicle manufacturers, and vehicle manufacturers on all four continents. It creates fully immersive, realistic models for the built environment. Interactive 3D VR Simulation and Modeling Software VR-Design Studio allows users to dynamically manipulate 3D space and run unlimited simulation scenarios. Users can also import and edit CAD data and build and texture models. Additionally, they can automatically add roads, tunnels, bridges, and other design options in real time, both online and off. The models can be viewed and interacted with by users. This allows them to analyze the potential environmental impacts of the proposed development.

Circuit can be exported into multiple quantum programming languages/frameworks, and can be run on different simulators and quantum computer. Drag & Drop user interface allows you to assemble circuit diagrams that automatically translate to code. You can also type code to update the diagram. QPS Client runs on your local machine or in the cloud where your quantum programming environment has been installed. It opens a websocket secure connection with Quantum Programming Studio Server and executes quantum networks (that you designed in the web interface) on your local simulation or on a quantum computer.

Interactive lessons, interactive videos and gamification give students real-time insight into their understanding. Our goal is to make teaching easy by providing teachers with all the interactive tools, resources and content they need. You can use insights from over 20 formative assessments and dynamic media features to guide and improve your teaching and student outcomes. You can adapt instruction and address misconceptions as you go. Students can be supported, challenged, or differentiated depending on where they are learning. Add simulations, formative assessments, and dynamic media to make any slides-based lesson interactive. You can also gather data about student understanding. You can also choose from thousands ready-to-teach and customizable lessons that align with standards from your favorite brands.

Our experiential learning approach combines the science of education, conversation and the power of gaming technology. Our products are based on several evidence-based learning methods and models to improve mental health. Users interact with our platform through virtual lessons and practice-based conversation experiences with emotionally-responsive virtual humans. Users can learn by doing and make mistakes in a safe, simulated environment. Our platform provides personalized feedback and allows users to tailor their experience to their needs. We use key models, theories, learning design principles, including motivational interviewing.

Gamified cyber range practice labs will elevate your cyber classes. Project Ares provides fun learning for students through gamified cyber range labs. The skills acquired in real-world scenarios are directly transferable to cybersecurity roles. Project Ares cyber laboratories provide hands-on experience in the classroom. Interactive learning is made possible by realistic network environments and hands on tasks. Through fun, classic game experiences, basic cybersecurity concepts like the cyber kill-chain, ports and protocol, and binary to hexadecimal converter are taught. Specialized labs are based on red or blue teams and tackle threats such as botnet, file-theft, and ransomware. Play this game for both professionals and students to demonstrate mastery of cybersecurity concepts such as the cyber intrusion killer chain, ports and protocols, regular expression techniques, etc. Interactive learning is possible with realistic network environments and real-world tasks.

It's fun and addictive to learn cyber security on TryHackMe. You can earn points by answering questions and completing challenges. You can also keep your hacking streak alive with short lessons. Follow a structured path to learn and then reinforce your skills by completing tasks and challenges that are objective-based and guided. TryHackMe is more than just a textbook. It focuses on interactive lessons that allow you to put theory into practice. Enjoy an immersive learning experience that includes network simulations and intentionally vulnerable technology, based on real-world examples. Are you new to security? No problem! There are learning paths that will help you learn the basics of cyber security and get you a job in this field. All the tools you need to begin learning are provided by us. You can access a machine equipped with security tools through the browser and start learning anywhere you like. All you need is an Internet connection!

Electromeet, an online laboratory platform that is cost-effective, was created for engineers lecturers and students. We use cloud technology and virtual instruments to enhance practical training, rather than replace it. To ensure cognitive learning outcomes and to empower students' critical thinking, we focus on instructional scaffolding. Computers can be connected to sensors and physical equipment in a way that is comparable to an engineering lab at a university. These practicals can be controlled, manipulated, and viewed over webcams in real time. Examples include data communication and protocols and scientific instrumentation. IRIS is an invigilation tool that provides educators with assurance about assessment integrity during remote and online assessments.

Our platform brings business & entrepreneurship to life through immersive, tailored simulations. Students can explore the topics in a fun and engaging way. No matter what your major or background is, our simulations can help you shape your career. Immerse yourself in the future of entrepreneurship and experience it today. Students can select from a variety of business simulations based on their interests. We have simulations that are relatable for every student, whether they're interested in the arts, hospitality or a SaaS business. Students enjoy applying their knowledge from your lessons in a business simulation. No longer must students wait until graduation to try out their side project or restaurant idea. Educators can deliver tailored learning experiences and maintain an intuitive grading scheme. Our commitment is to ensure accessibility and fairness for all.

> is a software architecture and tool suite for quantum computing. It includes a programming langage, optimization and scheduling algorithm, and quantum simulations. > can be used to translate a quantum algorithm written in the form of a high-level program into the low-level machine instructions for a quantum device. > is being developed by the quantum architectures and computation Group (QuArC) at Microsoft Research. >. > allows the simulation of Hamiltonians, quantum circuits, quantum stabilizer circuits, and quantum noise models, and supports client, service, and cloud operation.

Ansys Icepak solves thermal management problems using CFD. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak offers powerful electronic cooling solutions using the industry-leading Ansys Fluent CFD solver to perform thermal and fluid flow analysis of integrated circuits, packages, printed circuit board (PCBs), electronic assemblies and enclosures. Ansys' Icepak CFD solution uses the Ansys Electronics Desktop GUI (GUI). Perform heat transfer analysis conjugated with conduction, convection and radiation. Advanced capabilities include laminar and turbulent flow modeling, species analysis, including radiation and convection. Ansys PCB Design Solution allows you to simulate PCBs and ICs and accurately evaluate a system.

In addition to the design of quantum computers, the development of useful algorithms for quantum computing is a major focus. In the absence a large quantum computer, a software simulation of quantum computers is needed to simulate the execution and study of quantum algorithms. The QX simulator is able to simulate a realistic noisy execution by using different error models, such as depolarizing noise. The user can select the error model, and then define a physical probability of error to simulate a target quantum computer. This error rate can also be defined by the gate fidelity of the target platform and the qubit decoherence.

Revit electrical design software. AutoCAD offers electrical and HVAC design software. Revit models can be used to create electrical designs. Create a one-line riser diagram and size feeders. Calculate voltage drop correctly! You can also perform short-circuit analysis. Complete electrical design program in familiar AutoCAD environment. Integrate your calculations with drafting. Create panel schedules, one-line diagrams, fault and voltage drops, and much more. In the familiar AutoCAD environment, you can create a complete HVAC design program. You can easily design, size, and draft your HVAC ductwork.

Multipurpose, full-wave 3D electromagnetic (EM), simulation software for designing, simulating and optimizing high-frequency electronic products, such as antennas, components and interconnects. Ansys HFSS 3D electromagnetic (EM), simulation software is used to design and simulate high-frequency electronic products, such as antennas and antenna arrays, RF and microwave components, high speed interconnects and filters, connectors and IC packages. Ansys HFSS software is used by engineers around the world to design high-frequency, fast electronics for communication systems, advanced driver assistance system (ADAS), satellites, IoT products, and other areas. Engineers can address complex EMI, RF, microwave, IC and PCB problems with HFSS's unmatched capability. Ansys HFSS simulation suite includes a wide range of solvers that can be used to solve diverse electromagnetic problems.

These platforms, which are designed for the USA and Australia markets, provide time-division multiplexing and serial and analog circuit-based apps reliable and efficient access next-generation IP networks with cost redundancy and efficiency advantages. The CTP2056 Circuit to Packet Platform connects legacy and IP worlds to support circuit-switched applications. This 4U rack-mountable chassis is designed for Australian and U.S. markets. It offers maximum flexibility with up 56 circuit emulation interfacings. The CTP2024 Circuit to Packet platform bridges legacy and IP for circuit-switched applications. This rack-mountable 2U chassis is designed for Australian and U.S. markets. It supports up to 24 circuit emulator interfaces and optional redundant electricity. The CTP2008 Circuit-Switched Applications Platform bridges legacy worlds with IP. This 1 U rack-mountable chassis supports up to eight software-configurable circuit emulation interfaces.

Easy corporate learning solutions. Easy creation and publishing of online courses. You can create training courses that are compatible with every device. Combining text, images, video and simulations to create interactive experiences. Engage learners through a seamless combination interactive e-learning and assessments, in-person evaluations and live training events. Assign courses, assign due dates, monitor skill competency, track progress, and report on all aspects your team's training.

Microwave Office is a powerful tool for the design of passive components, such as filters, couplers and attenuators. It also supports active devices that operate under small-signal conditions, such as buffer amplifiers and low noise amplifiers. The linear configuration allows for simulation of S parameters (Y/Z/H/ABCD), linear stability, noise figure and return loss/voltage-standing-wave ratio (VSWR) as well as real time tuning, optimization and yield analysis. All E-series Microwave Office Portfolios include synchronous schematic/layout editors, 2D/3D viewer, libraries of high-frequency transmitted transmission models, surface mount vendor component RF model with footprints and measurement-based simulations. Microwave Office PCB supports analysis of RF/microwave systems with the APLAC HB Simulator and its powerful multirate HB, time-variant simulation engine and transient-assisted-HB.

IAutoDraw is an all-in-one software that can be used for data monitoring and simulation, domestic office business drawing as well as data monitoring. It is based upon process drawing components. It integrates tree components as well as Gantt chart, mathematical curve, and surface components. It has a real-time data connection direct, dynamic simulation scripts and other functions. It is a multifunctional software that can be used for basic office process drawing, monitoring industrial data, simulation of process models, and many other fields. It is widely used by various industries in the design of systems, processes, topology, project schedule scheduling and tree hierarchical structure relationships.