Alternatives to Ansys SCADE Architect

SPEC Innovations’ leading model-based systems engineering solution is designed to help your team minimize time-to-market, reduce costs, and mitigate risks, even with the most complex systems. Available as both a cloud-based and on-premise application, it offers an intuitive graphical user interface accessible through any modern web browser. Innoslate's comprehensive lifecycle capabilities include: • Requirements Management • Document Management • System Modeling • Discrete Event Simulation • Monte Carlo Simulation • DoDAF Models and Views • Database Management • Test Management with detailed reports, status updates, results, and more • Real-Time Collaboration And much more.

IBM® Engineering Systems Design Rhapsody® (also known as Rational Rhapsody) and its suite of tools provide an effective approach to modeling and systems design, helping organizations navigate the complexities of product and system development. As a component of the IBM Engineering portfolio, Rhapsody fosters a collaborative environment for systems engineers, accommodating various modeling standards like UML, SysML, UAF, and AUTOSAR. Additionally, it supports the management of defense frameworks, including DoDAF, MODAF, and UPDM, while facilitating compliance with critical industry standards such as DO-178, DO-178B/C, and ISO 26262. The platform enables rapid simulation and prototyping, allowing for continuous validation and the early detection of errors when they are more affordable to rectify. By employing automatic consistency checks, Rhapsody enhances agility and promotes reuse, ultimately contributing to a reduction in both recurring and non-recurring expenses. This comprehensive toolset not only streamlines the design process but also empowers teams to innovate more effectively.

VxWorks®, a leading real-time operating platform in the industry, provides all the performance, reliability, safety and security capabilities you need for the most critical infrastructure's embedded computing systems. VxWorks is a preemptive, deterministic RTOS that prioritizes real-time embedded applications. It has low latency and minimaljitter. VxWorks has many security features that address the evolving security threats connected devices face at every stage, from boot-up to operation to data transfer to powered off. VxWorks has been certified to IEC 61508, ISO 26262, and DO-178C safety standards. VxWorks is built on an extensible, future-proof architecture that allows you to quickly respond to changing market demands, customer needs, technological advancements, and preserves your investment.

Contemporary vehicles, aircraft, and other intricate industrial products consist of numerous electronic elements that work harmoniously to deliver essential functionalities. Beneath these sophisticated systems lies a vast array of embedded software code, amounting to millions of lines, which guarantees seamless operation across various scenarios. Ansys SCADE Suite significantly lowers safety certification expenses by streamlining the design of critical control applications while automating tasks like verification, certified code generation, and documentation creation. Over the last ten years, Ansys SCADE has proven to be an indispensable strategic asset for Subaru in the competitive landscape of launching new hybrid and electric vehicle models, reinforcing the company's dedication to exceptional safety and quality standards. The efficiencies gained during the comprehensive development process of the ECU—without compromising the precision of its control software—have been vital for Subaru in adopting cutting-edge technologies and staying ahead in the automotive market. This innovative approach not only enhances Subaru's product offerings but also strengthens its market position as a leader in automotive safety and technology.

It features thousands of ready-made models that span a diverse array of engineering fields, along with a search function to help find the model that best suits your design needs, and extensive support for various targets. The Embed library includes a collection of motor models and motor control algorithms applicable to both sensored and sensorless scenarios, serving as a foundation to expedite embedded motor control projects for all types of electric motors, such as AC induction, BLDC, PMSM, brushed DC, and stepper motors. Additionally, with Embed, users can seamlessly model and simulate comprehensive physical layer data communication systems, allowing for the assessment of energy and bit requirements necessary to achieve a specified bit error rate across a wide range of modulation, encoding, and channel configurations. Furthermore, this tool enhances the efficiency of engineering projects by streamlining workflows and enabling rapid prototyping.

It allows team collaboration on all important aspects of Engineering Lifecycle such as: Requirements Management - Data Driven Functional Design - Product Architecture Detailed Systems Design & Simulation Automated Verification Documentation Live It also allows for improvements to be made across the lifecycle of processes, such as: - Agile Engineering Planning Technical Change Management Comparing to siloed Requirement management systems or Model Based Systems Engineering experts-tools, the data-driven architecture of this software enables agile hardware design across departments and with a digital thread throughout the engineering lifecycle. Valispace's proprietary calculations engine propagates changes to users, requirements architecture, verifications, and documentation instantly. Its introduction into the engineering process can reduce costs by reducing development times and by preventing costly design errors that lead to expensive rework.

LabVIEW provides a visual programming environment that allows you to effectively manage all components of your project, such as hardware setups, data collection, and troubleshooting processes. This visual interface streamlines the integration of measurement devices from various manufacturers, enables the representation of intricate logic within the diagram, facilitates the creation of data analysis algorithms, and allows for the development of tailored engineering user interfaces. By utilizing LabVIEW alongside NI DAQ hardware, users can construct bespoke measurement systems that enable the visualization and analysis of real-world signals, empowering them to make informed, data-driven choices. Additionally, LabVIEW in conjunction with NI or third-party hardware allows for the automation of product validation, ensuring that stringent time-to-market and performance standards are met. With LabVIEW, it is possible to devise adaptable testing applications that coordinate multiple instruments while also crafting user interfaces that enhance efficiency in manufacturing tests and reduce operational expenses. Moreover, LabVIEW accelerates the process of developing industrial machinery and intelligent devices, creating opportunities for innovation and efficiency. Ultimately, this powerful tool equips engineers with the capabilities to optimize their projects and achieve superior results.

Enterprise Architect is an enterprise-wide solution that allows you to visualize, analyze and model, test, and maintain all your software, processes, and architectures. Enterprise Architect is the perfect platform to help you manage your workspace, support your team, encourage collaboration, and build confidence in your most complex projects.

Elevate your design approach beyond traditional mathematical modeling with a comprehensive RF-aware workflow, enhanced by decades of expertise in RF instrumentation from Keysight, tailored for system architects. PathWave System Design presents an unparalleled platform for prototyping and designing intricate RF systems, boasting rapid simulation capabilities, high fidelity near-circuit accuracy, and extensive libraries tailored for radar, electronic warfare, satellite communication, 5G, and WiFi, along with seamless enterprise integration through a variety of partnerships. While statistical models for channel and propagation provide a foundation, they have limitations in advancing your design efforts. The use of dynamic kinematic modeling opens new avenues for radar, electronic warfare, satellite technologies, 5G, and automotive applications, particularly through integration with tools like STK from AGI, an Ansys Company. Additionally, professionals developing advanced cellular systems require reliable reference libraries grounded in Keysight’s measurement science to ensure accuracy and performance. Furthermore, those engaged in pioneering the next generation of communication signals will benefit from a versatile platform that supports both physical layer development and rigorous testing, facilitating innovation in a rapidly evolving field.

The VeriStand application software facilitates the configuration of I/O channels, data logging, stimulus generation, and host communication for National Instruments' real-time hardware. Additionally, users can import simulation models and control algorithms, manage events through configurable alarms, and enhance test automation via macro recording, TestStand, .NET, and numerous other software tools. A runtime-editable user interface allows for the interaction with and monitoring of application data, alarm statuses, and system execution metrics. While programming knowledge is not a requirement, users have the option to utilize various software environments, including LabVIEW, ANSI C/C++, Python, and ASAM XIL, to introduce custom functionalities into VeriStand. This software is designed to aid test engineers in minimizing the time required for product testing by offering a comprehensive suite of features such as configurable data acquisition, integration of simulation models, test sequencing, and logging. Explore the possibilities with VeriStand to create, implement, and execute your real-time testing processes effectively and efficiently. You’ll find that the versatility of VeriStand can significantly optimize your testing workflow.

Cameo Systems Modeler ™ stands out as a top-tier cross-platform environment for collaborative Model-Based Systems Engineering (MBSE), offering sophisticated, user-friendly tools to delineate, monitor, and visualize every facet of systems through compliant SysML models and diagrams. This environment empowers systems engineers to perform engineering analyses to assess design decisions and verify requirements while maintaining ongoing checks for model consistency and tracking design advancements with relevant metrics. Furthermore, system models can be efficiently managed in remote repositories, saved as standard XMI files, or transformed into documents, images, and web views, catering to the diverse needs of various stakeholders involved in the project. By streamlining these processes, Cameo Systems Modeler ™ enhances communication and collaboration among teams, ultimately leading to more effective system development.

Expert Implementation of Capella. We provide a customized Capella-based, industrial-strength MBSE workbench that is primed for your most vital projects. Tailored Integration. Adapt and expand Capella to meet your unique engineering needs while seamlessly connecting it with other tools. Customization and Integration. Collaborative Capella. Utilize collaborative functionalities that enable large teams to work on the same models simultaneously. Team Collaboration for Capella. Capella solutions. Guarantee a Successful Implementation. Take advantage of our solid partnership with Thales, the developers of the Capella solution. Training, Guidance, and Support. Why Choose Obeo? We have been involved with Capella since its inception. Committed to Open Innovation principles, Obeo stands as the primary partner of Thales in the development of the Capella workbench and its ecosystem. As an Eclipse Strategic member and provider of various Capella add-ons (like Team for Capella and M2Doc), we possess deep technical expertise. Our experience allows us to offer comprehensive support to ensure that your deployment meets all expectations.

A Digital Thread is essentially a graph consisting of nodes that represent various elements found in enterprise repositories, tools, and systems for version control, with edges denoting both intra-model relationships within each tool and inter-model connections that Syndeia facilitates between these nodes. Additionally, Syndeia offers model transformation capabilities that help construct the digital thread graph, allowing for operations such as seamlessly dragging and dropping requirements from Jama or DOORS-NG into SysML, generating Simulink models and PLM part structures derived from SysML models, linking behavior elements in SysML to corresponding software code in GitHub, and even monitoring the development progress of a sub-system in JIRA directly from SysML. Furthermore, Syndeia enhances the functionality of the digital thread by providing services for searching, comparing, and bi-directionally synchronizing interconnected models, enabling users to compare and synchronize alterations in system architecture with the PLM part structure or align changes made in DOORS-NG requirements with SysML, illustrating the comprehensive capabilities of digital thread management. Ultimately, this interconnected approach not only streamlines workflows but also ensures that all components of a project remain aligned and up-to-date across multiple platforms.

System Composer™ facilitates the detailed specification and evaluation of architectures within the realm of model-based systems engineering and software architecture modeling. By utilizing System Composer, users can effectively allocate requirements while enhancing an architecture model, which can subsequently be designed and tested in Simulink®. Users have the flexibility to create architecture models composed of components and interfaces either from scratch, by importing from other tools, or by leveraging the architectural elements already present in Simulink designs. Furthermore, it allows for the representation of a system through various architecture models, enabling the establishment of direct connections between them through model-to-model allocations. Behavioral aspects can be documented using sequence diagrams, state charts, or Simulink models, providing a comprehensive overview of system dynamics. Additionally, you can specify and simulate the order of execution for component functions, and even generate code from your software architecture models utilizing tools like Simulink and Embedded Coder®. This seamless integration ensures a robust framework for developing complex systems efficiently.

Zulu Embedded™, the only 100% open-source Java platform that is fully certified and customizable for embedded systems, IoT and IIoT edge devices and gateways, and dedicated applications, is available. It can be used on a variety of operating systems and devices. Zulu Embedded™, which meets all Java SE standards, requires no coding changes to the application. Use industry-standard Java tools to develop and profile. There are no licensing fees for this 100% open-source offering. Zulu Embedded support plans include redistribution-ready downloadable runtimes and access to all security updates, technical troubleshooting and a wide range of packaging options. We will work closely with you to determine the right bundle requirements, support, pricing, and pricing model to meet your needs.

You can manage your needs, epics and user stories through a series sprints. Each sprint uses your choice of requirements management, model-based systems engineering (MBSE), and test management. You can also choose to use formal change control, configuration management, and change tracking. Cradle®, our requirements management and systems engineering software tool, integrates your entire project lifecycle into one, highly scalable, integrated, multiuser product. Cradle can handle all your requirements management, model driven, defect tracking, and test management needs, no matter how small or large your projects may be. Cradle's unrivaled feature list, flexibility, simplicity, and low cost make it the perfect choice for anyone new to agile methods, systems engineering, or requirements management.

Simcenter Amesim, the most integrated and scalable platform for system simulation, allows system engineers to simulate and optimize mechatronic system performance. This will increase overall system engineering productivity, from the initial development stages to the final performance validation and controls calibration. Simcenter Amesim is a combination of ready-to-use multiphysics libraries and industry-oriented solutions. It supports powerful platform capabilities that allow you to quickly create models and perform analysis. This open environment can be easily integrated with major computer-aided designing (CAD), computer-aided engineering and controls software packages.

IBM Engineering Lifecycle Management (ELM) serves as a cutting-edge, all-inclusive engineering solution, effectively guiding users through every stage from requirements gathering to systems design, workflow, and testing management, while enhancing the capabilities of ALM tools to support intricate systems development. By embracing a holistic perspective throughout the product lifecycle and establishing a robust digital infrastructure for data traceability, organizations can efficiently monitor changes, thereby mitigating risks and lowering expenses. Tackle the intricacies of engineering from conceptual design to final execution, foster collaboration among teams through a cohesive digital thread, utilize modeling and reuse strategies, capitalize on insights derived from automated reporting, and confidently scale operations to create a robust foundation for continuous innovation. The interlinked data within the digital thread will provide a unified source of truth, empowering functional, software, mechanical, and electrical engineering disciplines to work in harmony. This interconnected approach not only streamlines processes but also enhances the overall efficiency and effectiveness of the engineering lifecycle.

Reduce technical engineering-related risks that can affect performance, operational reliability, and maintenance costs through the use of modeling, analysis, and decision support processes. The MADe system facilitates improved decision-making regarding the design and maintenance of safety and mission-critical equipment throughout the entire product lifecycle. By employing interdependent analysis capabilities, it addresses the technical, operational, and economic needs of the system's operators and maintainers, thereby mitigating risks effectively. Furthermore, MADe serves as a comprehensive analysis tool that produces the necessary documentation for Airworthiness certification. Conducting analysis concurrently with the design phase enhances the efficiency of the certification process significantly. Additionally, MADe meticulously tracks the origins of all parameters utilized in its analyses, ensuring a robust mechanism for evaluating the quality of data that informs engineering decisions and assessments. This attention to detail ultimately strengthens the reliability and effectiveness of the engineering processes involved.

The security of connected embedded system devices is crucial, particularly for systems that must maintain high availability and support mission-critical functions. In the current landscape of increasing cyber threats, it is essential for connected embedded systems utilized in various sectors such as industrial controls, transportation, navigation, communications, aerospace, military, healthcare, and logistics to implement robust security measures from the moment of deployment and throughout their entire life cycle. As product developers face pressure to expedite their go-to-market strategies, many opt to incorporate third-party software components, whether open source or proprietary, to fulfill essential product requirements. Traditionally, security audits are conducted only at the conclusion of the development and testing phases, just prior to the launch of the products. This late-stage approach can often overlook vulnerabilities that may arise earlier in the development process, highlighting the need for a more integrated security strategy throughout the entire lifecycle of connected embedded systems.

In the realm of ensuring software quality, reliability, and security amid complex code bases, the conventional methods of debugging and testing are increasingly proving inadequate. Automated solutions like static source code analyzers excel in identifying defects that could lead to issues such as buffer overflows, resource leaks, and various other security vulnerabilities that often escape detection by standard compilers during regular builds, run-time tests, or typical operational conditions. These defects typically go unnoticed, underscoring the limitations of traditional methods. Unlike other standalone source code analyzers, DoubleCheck stands out as an integrated static analysis tool that is woven into the Green Hills C/C++ compiler. It employs precise and efficient analysis algorithms that have been refined and validated through over three decades of experience in developing embedded tools. By using DoubleCheck, developers can seamlessly conduct compilation alongside defect analysis in a single pass, streamlining their workflow and enhancing overall code integrity. This integrated approach not only saves time but also significantly improves the identification of potential issues within code.

The Studio 5000® platform merges various design components into a unified framework that enhances efficiency and shortens commissioning time. This user-friendly integrated design platform emphasizes swift design processes, the ability to reuse elements, teamwork, and virtual design capabilities. The revamped interface ensures a consistent and contemporary user experience across all Studio 5000 applications, making it easier for users to navigate. Studio 5000 Logix Designer® offers a straightforward programming environment that fosters collaboration among users in the design and maintenance of their systems. Through Studio 5000 Architect®, users can quickly initiate the development of their control and visualization applications. Additionally, the Studio 5000 Simulation Interface links both physical and simulated controllers to modeling and simulation tools, streamlining the process of virtual commissioning and facilitating model-based design. By integrating these features, Studio 5000 significantly advances the efficiency of automation projects.

A comprehensive development environment tailored for Arm architecture, designed to produce efficient and streamlined code while granting you full authority over your programming projects. This all-in-one Integrated Development Environment features tools for project management and a built-in editor. It boasts an impressive library of 8,400 example projects, complete with configuration files, code snippets, and project templates, allowing for rapid project initiation. The IAR C/C++ Compiler, crafted by our team of compiler specialists, supports both C and C++ languages and provides sophisticated global and target-specific optimization techniques. Additionally, it accommodates a variety of industry-standard debugging and image formats, ensuring compatibility with most leading debuggers and emulators, including ELF/DWARF where applicable. This robust setup is complemented by a fully integrated linker and assembler, enabling the efficient creation of embedded applications. Supporting all 32-bit Arm cores from prominent vendors, as well as selected 64-bit Arm cores, our tools come with a flexible licensing model tailored to meet the unique needs of your organization. With this environment, developers can enhance productivity and streamline their workflow to achieve optimal results.

Since its inception in 1993, CORE has been the backbone for thousands of projects and has assisted tens of thousands of systems engineers. From the outset, CORE has championed the principles of what we now recognize as model-based systems engineering. By leveraging a systems metamodel that integrates with robust view generators, it enables the on-demand production of diagrams while ensuring consistency, thus fostering a generation of successful systems engineering initiatives globally. Although GENESYS is the preferred option for many organizations in the current landscape, Vitech remains committed to supporting projects and clients who continue to depend on CORE for their systems engineering requirements. Just as defining and managing interfaces in system design is crucial for success, so too is the effective management of data interrelationships, which plays a pivotal role in achieving project objectives. This holistic approach to systems engineering not only enhances productivity but also drives innovation in the field.

Drawing on over two decades of expertise from CORE, GENESYS represents Vitech's cutting-edge software that facilitates interconnected systems engineering throughout the organization. Completely redesigned, GENESYS adopts established model-centric methodologies while incorporating contemporary technologies within a fully open architecture. This innovation results in the strength of a comprehensive Model-Based Systems Engineering (MBSE) ecosystem, seamlessly integrated with the convenience of modern office applications, tailored to meet your data needs. By merging a reliable, model-centric systems engineering strategy with an architecture suitable for enterprise use, GENESYS empowers you to implement MBSE effectively and uniformly across your project teams. Moreover, GENESYS eliminates uncertainty in implementation and provides context-driven modeling solutions for intricate systems engineering challenges, ensuring your projects are executed with precision and clarity. With its user-friendly interface and robust functionalities, GENESYS sets a new standard in systems engineering software.

Relatics is web-based Model-Based Systems Engineering software that projects in civil and construction engineering use for requirements management and system engineering. It eliminates the need for multiple spreadsheets and isolated applications. Relativity has been proven to increase project control, reduce project risk, and lower failure costs. Relatics is used for building, roads, tunnels and railways by contractors and consulting firms.

Projects in systems engineering are far more likely to achieve success when all stakeholders can actively participate in the process; however, many lack the expertise to navigate traditional systems engineering tools or engage with the intricate modeling languages commonly used. MapleMBSE addresses this challenge by providing user-friendly, Excel-based interfaces tailored to each specific task within your systems engineering project. By allowing all stakeholders to connect live to the system model, collaboration becomes seamless, enabling quicker workflows, minimizing mistakes, and curtailing unexpected expenses. Additionally, the MapleMBSE interface is designed for ease of use, granting system engineers greater adaptability for model modifications, which ultimately leads to a decrease in errors related to knowledge capture. This innovative approach fosters a more inclusive environment for stakeholder involvement, significantly enhancing project outcomes.

An effective ALM tool significantly enhances the management of your product's application lifecycle. The premier ALM tools offer comprehensive traceability throughout the entire lifecycle, which is why development teams from various sectors opt for Perforce ALM (formerly Helix ALM). This versatile suite of ALM tools is designed to facilitate the tracking of requirements, testing, and issue management. Perforce ALM stands out as the top software for application lifecycle management, providing extensive traceability throughout the process. This means you will have clear visibility into whether requirements have been adequately tested and fulfilled, whether test executions were successful or not, and whether any issues have been addressed. Furthermore, should a requirement undergo changes, you will instantly know the test cases and issues that may be affected. Perforce ALM simplifies the creation of requirements and the sharing of related documents, allowing for seamless reviews and approvals directly within the application. Additionally, it offers the flexibility to reuse requirements across different projects, enhancing efficiency and collaboration. The collaborative features of Perforce ALM ensure that all team members stay informed and aligned throughout the lifecycle.

Embunit serves as a unit testing framework tailored for developers and testers working with C or C++, particularly in the realm of embedded software. Although primarily intended for embedded systems, it can effectively facilitate the creation of unit tests across various software applications written in C or C++. By automating the repetitive tasks associated with writing unit tests, Embunit allows users to focus on defining the desired test behavior. This is accomplished by outlining a series of actions, as illustrated in the accompanying example screenshot. The tool automatically generates the source code for unit tests, which enhances efficiency. Designed with adaptability in mind, Embunit can be customized to generate unit tests for nearly any hardware platform, including even the smallest microcontrollers. It operates independently of any specific toolset and is crafted to meet the typical constraints faced by embedded C++ compilers, ensuring broad compatibility and utility. Ultimately, Embunit streamlines the testing process, making it more accessible for developers across various projects.

With the rapid advancements in microprocessor technology, application developers increasingly turn to Green Hills Compilers to harness the complete capabilities of hardware, ensuring optimal performance and functional safety in their upcoming applications. The compilers are equipped with cutting-edge optimizations designed to enhance program performance while adhering to stringent size limitations. A notable feature, CodeFactor™, enhances execution speed and minimizes code size by eliminating redundant code segments through techniques like subroutine calls and tail merging. Similarly, static basing optimizes performance and reduces size by organizing data items, which cuts down on the number of load address operations needed. Each optimization, whether a novel creation or an established industry standard, undergoes a thorough implementation process. For over thirty years, our commitment to engineering excellence has driven us to meticulously research and rigorously test each optimization against a wide array of benchmarks to ensure the highest quality. This dedication to innovation guarantees that developers can confidently rely on our tools to elevate their applications.

Sourcery CodeBench offers a comprehensive suite of tools designed to assist embedded software engineers in the effective development and enhancement of software across numerous targets and sectors, such as Automotive, Connectivity, Graphics, and Video applications. This suite extends beyond a mere compiler, equipping developers with robust open-source C/C++ development tools that facilitate the building, debugging, analysis, and optimization of embedded software within intricate heterogeneous architectures like Arm, IA32, MIPS, and Power Architectures. The integrated Eclipse-based IDE allows for tailored workspace configuration and efficient project management. Additionally, it features an advanced source code editor that includes syntax highlighting for improved readability. To further support custom hardware implementations, the Board Builder tool automatically creates linker scripts, debug configuration files, and startup code based on the specific memory layout of the board, streamlining the setup process for developers. Overall, Sourcery CodeBench significantly enhances productivity and efficiency for engineers working in embedded systems.

P4 (formerly Helix Core) is a high-performance version control system that provides robust capabilities for managing code, assets, and files across global development teams. It supports large-scale projects, enabling seamless collaboration and version tracking for both code and non-code assets, including 3D models and media files. Designed for industries with complex workflows, such as gaming, automotive, and software development, P4 offers unmatched scalability, security, and speed. The platform integrates easily with development tools, providing a comprehensive solution for teams seeking efficient version control across all stages of the development lifecycle.

The effectiveness of your programming is determined by its performance and precision in execution. Are you equipped with the right resources in your current development setup to write clean, efficient, and accurate code? Given your role in crafting solutions that influence human safety and lifespan, ensuring that your integrated development environment is top-notch is essential and cannot be overlooked. The TASKING Embedded Software Development solutions offer a premier ecosystem designed to support your entire software development journey. Each TASKING compiler is tailored for specific architectures, addressing the unique demands of industries such as automotive, industrial, telecommunications, and datacom. With a comprehensive integrated development environment at your disposal, you can produce code that is both error-free and efficient, benefiting from advanced features like compilers, debuggers, embedded internet capabilities, and RTOS support for leading microprocessors and microcontrollers. This ensures that you remain at the forefront of technological advancement while delivering reliable solutions.

Qt Creator's sophisticated code editor supports a variety of programming languages such as C++, QML, JavaScript, and Python. It boasts features like code completion, syntax highlighting, and refactoring, while providing easy access to built-in documentation. This powerful tool seamlessly integrates with popular version control systems, including Git, Subversion, Perforce, and Mercurial. With integrated visual editors, you can create C++ widget-based applications or dynamic UIs using Qt Quick, complete with pre-built controls. Whether you're importing an existing project or starting from scratch, Qt Creator takes care of generating all necessary files for you. It also includes support for CMake and facilitates cross-compiling with qmake. You can build and execute your software on various platforms, including desktop, mobile, and embedded operating systems. The build configurations are user-friendly, allowing you to easily switch between different targets. Furthermore, you can thoroughly test and debug your applications under conditions that closely mimic those of your intended devices, ensuring a smoother development process. This versatility makes Qt Creator an invaluable tool for developers seeking efficiency and ease of use in their projects.

MATLAB® offers a desktop environment specifically optimized for iterative design and analysis, paired with a programming language that allows for straightforward expression of matrix and array mathematics. It features the Live Editor, which enables users to create scripts that merge code, output, and formatted text within an interactive notebook. The toolboxes provided by MATLAB are meticulously developed, thoroughly tested, and comprehensively documented. Additionally, MATLAB applications allow users to visualize how various algorithms interact with their data. You can refine your results through repeated iterations and then easily generate a MATLAB program to replicate or automate your processes. The platform also allows for scaling analyses across clusters, GPUs, and cloud environments with minimal modifications to your existing code. There is no need to overhaul your programming practices or master complex big data techniques. You can automatically convert MATLAB algorithms into C/C++, HDL, and CUDA code, enabling execution on embedded processors or FPGA/ASIC systems. Furthermore, when used in conjunction with Simulink, MATLAB enhances the support for Model-Based Design methodologies, making it a versatile tool for engineers and researchers alike. This adaptability makes MATLAB an essential resource for tackling a wide range of computational challenges.

Static analysis is a valuable technique for identifying possible problems within your code by examining it at the source code level. C-STAT offers nearly 700 different checks, many of which adhere to guidelines outlined in MISRA C:2012, MISRA C++:2008, and MISRA C:2004, in addition to more than 250 checks that correspond to issues recognized by CWE. Furthermore, it assesses adherence to the CERT C coding standard, which focuses on secure coding practices. C-STAT operates swiftly and provides extensive and detailed error reports, allowing for effective troubleshooting. There’s no need to be concerned about complicated tool configurations or dealing with language support and overarching build challenges. Fully integrated into the IAR Embedded Workbench IDE, C-STAT empowers you to effortlessly maintain code quality throughout your development processes. This tool is compatible with a wide range of IAR Embedded Workbench products. By utilizing static analysis, not only can potential code issues be detected, but it also facilitates compliance with established industry coding standards. Ultimately, this enhances overall software reliability and maintainability.

Apache NetBeans is a dynamic, open-source Integrated Development Environment (IDE) that supports the development of applications in various programming languages, such as Java, JavaScript, PHP, HTML5, and C/C++. Renowned for its modular framework, NetBeans equips developers with a comprehensive suite of tools and features tailored for creating desktop, mobile, and web applications. It boasts advanced code editing, debugging, and profiling functionalities, as well as an integrated visual GUI builder for crafting user interfaces in Java. Additionally, NetBeans provides support for multiple version control systems like Git, SVN, and Mercurial, enhancing collaborative efforts among teams. As a project under the Apache Software Foundation, NetBeans is continually refined by a vibrant community dedicated to expanding its capabilities, ensuring it remains a dependable and adaptable option for developers in numerous fields. Furthermore, its extensive documentation and tutorials make it accessible for both novice and experienced programmers alike.

20-sim is a comprehensive software tool designed for modeling and simulating mechatronic systems. The interface enables users to graphically input models, resembling the process of sketching an engineering diagram. Utilizing these models, one can assess and simulate the dynamics of complex multi-domain systems while also developing control strategies. Additionally, the software allows for the generation of C-code, which can be deployed on hardware to facilitate rapid prototyping and Hardware-in-the-Loop (HIL) simulations. 20-sim is equipped with features that streamline the modeling process, making it both fast and user-friendly. Users have the option to model using various methods, including equations, block diagrams, physics blocks, and bond graphs. To assist in constructing models, the 20-sim editor boasts an extensive library filled with building blocks and components, such as block diagrams and bond graphs, making it easier to create and analyze complex systems efficiently. Overall, this software package serves as a powerful tool for engineers seeking to innovate in the field of mechatronics.

For more than three decades, Helix QAC has established itself as a reliable static code analyzer specifically designed for C and C++ programming languages. Renowned for its thoroughness and precision, Helix QAC has become the go-to choice in highly regulated and safety-sensitive sectors that must adhere to strict compliance standards. This often entails ensuring alignment with coding standards like MISRA and AUTOSAR, as well as functional safety regulations such as ISO 26262. The tool boasts TÜV-SÜD certification for functional safety compliance, encompassing standards like IEC 61508, ISO 26262, EN 50128, IEC 60880, and IEC 62304. Furthermore, it holds ISO 9001 | TickIT plus Foundation Level certification, a widely recognized standard that guarantees not only the fulfillment of requirements but their surpassing as well. By allowing users to prioritize coding issues according to risk severity, Helix QAC enables efficient targeting of critical defects through various tools, including filters, suppressions, and baselines, enhancing overall code quality and safety. This commitment to excellence solidifies Helix QAC's reputation as an essential asset in the development process.

Artura is an innovative, constantly evolving product that solves the problem that all system designers, project managers and system integrators are familiar with. Engineer, design, and propose technical systems, such as AV, IT Security, Lightning etc. Different people use different tools, which are not always designed to do the job. This leads to time-consuming, repetitive tasks, an inefficient documentation flow, and no central overview. There is no central source of truth for design and scope changes, while the project is rife with operational inefficiencies. Artura is the solution. It is a collaborative tool for designing, engineering and generating proposals. Artura is a modern, easy-to-use, online web application that allows you to design systems, create proposals, and engineer them. For your team, client, and other stakeholders.

SystemLink streamlines the process of maintaining test systems, reducing the need for manual interventions. By automating updates and continuously monitoring system health, it provides essential insights that enhance situational awareness and readiness for testing, ultimately ensuring high-quality outcomes throughout the product lifecycle. With SystemLink, you can confidently verify that software configurations are precise and that testing equipment meets all necessary calibration and quality regulations. Utilizing a robust automation and connectivity framework, SystemLink consolidates all test and measurement data into a single, accessible data repository. This allows users to easily track asset usage, predict calibration needs, and review historical test results, trends, and production metrics, empowering them to make informed decisions regarding capital expenditures, maintenance schedules, and potential modifications to tests or products. Furthermore, this insight facilitates ongoing improvements and optimizations across the testing process.

Altair Activate is utilized to model and simulate a diverse array of products as interconnected systems, facilitating the discovery of improved designs at an accelerated pace. As products across various sectors grow more intricate, electrified, intelligent, and interconnected, the need for advanced simulation tools becomes paramount. By leveraging multi-disciplinary system-level simulation capabilities, designers can develop sophisticated mechatronic systems more holistically, fostering enhanced collaboration and streamlined workflows among product development teams. Altair Activate effectively eliminates barriers between various subsystems, including mechanical, electrical, control, and electronic components, as well as software and hardware-in-the-loop interactions, alongside data analytics. Utilizing 1D modeling and simulation for thermal-fluid system dynamics allows for nearly equivalent accuracy to traditional 3D CFD methods, while significantly reducing timeframes, thereby promoting extensive design exploration and performance optimization more efficiently. This innovative approach not only speeds up the design process but also empowers teams to create more integrated and efficient product solutions.

InstrumentStudio offers a cohesive platform to streamline your display setups, export instrument configurations for an enhanced starting point, and effectively monitor and troubleshoot your automated testing systems. Users can leverage unified displays on large, high-resolution monitors to observe data and capture multi-instrument screenshots along with measurement outcomes. By saving project-level configurations, testing becomes more repeatable with designated devices, while instrument configurations can also be directly exported to programming environments or TestStand, thereby facilitating code simplification and parametric sweeps. Furthermore, InstrumentStudio allows for simultaneous use with your existing code, enabling real-time monitoring and debugging of ongoing test applications. This integrated environment not only simplifies the process of conducting quick, interactive measurements but also enhances the efficiency of automated production testing systems, making it an invaluable tool for engineers and developers alike.

An array of interconnected elements is making the construction process more intricate. This complexity necessitates the involvement of various stakeholders from diverse engineering disciplines. As these disciplines intersect, an amalgamation of languages, tools, and databases emerges. To unify these stakeholders, organizations are adopting model-based systems engineering (MBSE) methodologies within their application lifecycle activities, which provide a shared visual language and a structured engineering approach. PTC's solutions foster a collaborative and visual framework that enhances communication, clarity, and the sustainability of all product information. By leveraging modeling, tools, and techniques, MBSE enhances the effectiveness of systems engineering programs and projects, driving technological advancement while positively influencing expenses and productivity. Additionally, the early identification and mitigation of risks contribute to improved quality and regulatory compliance throughout the engineering process. This integrated approach not only streamlines workflows but also fosters a culture of continuous improvement and innovation.

FlexLogger enables the creation of adaptable and scalable data-logging systems using NI DAQ hardware without any need for programming. It offers sensor-specific workflows that allow for the rapid setup, visualization, and logging of various synchronized measurements from both analog sensors and digital signals, as well as vehicle communication buses. Additionally, users can generate voltage, current, or digital outputs to control actuators or manage set points effectively. The software automatically captures metadata about your testing configuration, facilitating easy tracking of test outcomes and enabling comparisons across different experiments. With an integrated data viewer, you can interactively assess test results, visually analyze your data, and draw informed conclusions. FlexLogger ensures that mixed-signal measurements are synchronized automatically, allowing for precise data analysis from multiple sources to confirm that physical components operate according to their design specifications. This comprehensive tool is ideal for engineers seeking to streamline their testing processes and improve the reliability of their measurements.

At Revalize, we empower businesses to design, model, develop, and sell effectively, enhancing outcomes across the value chain. Our solutions ensure efficiency from idea to cash, even in volatile markets. With best-in-class CAD, PLM, and CPQ solutions, supported globally, we're your partner in reducing costs and simplifying complexity. Our advanced CPQ platforms optimize your sales-to-production process, setting you apart from competitors. Focus on revenue growth and simplifying operations with a polished customer experience. We cater to various industries, from hospital equipment planning to infrastructure lighting design. Our tools aid architects and designers in crucial projects, streamlining the design-to-cash process for specialty manufacturers. Revalize offers leading CPQ, product, and design solutions to manage inventories, visualize product configurations, and meet specific industry needs. Wherever your business journey starts, greater outcomes start with Revalize.

ITEM Software stands out as a premier global provider of Reliability Software tailored for engineering applications. For businesses engaged in the evaluation of Reliability, Availability, Maintainability, and Safety (RAMS), reaching out to ITEM Software is essential. Our commitment lies in delivering top-notch products accompanied by exceptional after-sales support. We continuously enhance our offerings based on user feedback and advancements in software technology, ensuring our clients have access to the latest innovations. Our knowledgeable engineers and software specialists are always ready to assist, and we offer comprehensive training programs focused on both the methodologies used in this field and the effective utilization of our software solutions. Clients can acquire our analytical tools individually, choose various combinations, or opt for an all-inclusive package that meets their specific needs. This flexibility allows businesses to tailor their software solutions to effectively address their unique challenges.

VEE (W4000D) is a user-friendly graphical programming platform that offers extensive connectivity options (GPIB, Serial, LAN) for facilitating automated test and measurement processes in both analysis and reporting. The latest release, Keysight VEE Pro 9.33, enhances the graphical programming experience by providing an intuitive language environment that streamlines measurement and analysis, effectively succeeding VEE Pro 9.3. Built for adaptability, it ensures compatibility with current industry standards, allowing for smooth integration with hardware and software from both Keysight and various other manufacturers. Additionally, Keysight VEE Pro 9.33 features sample programs tailored for the newest Keysight instruments, further enriching the user experience. Users developing programs in VEE Pro 9.2 will find that their work transitions effortlessly into VEE Pro 9.33, maintaining continuity in their projects. Those utilizing previous versions, including VEE Pro 9.0, VEE Pro 9.2, VEE Pro 9.3, and VEE Pro 9.32, can upgrade to the latest version at no extra charge. However, it is important to note that existing VEE Education users with older versions (8.5 and below) will need to purchase VEE Education 9.33 directly, as upgrades are not available for them. This reflects Keysight's commitment to ensuring users have access to the latest tools and features.

Advanced requirements can be met with a comprehensive fluid and electrical planning software environment. E3.series is a real concurrent electrical engineering environment that supports advanced requirements for electrical documentation and wire harness design. E3.series allows for efficient and accurate design and manufacturing processes for electrical and fluid planning, wire harness and cabinet layout, as well as cable planning and cable planning. Its object-oriented architecture allows for a consistent and integrated design approach that reduces design time, eliminates errors, and improves quality. Object orientation ensures consistency in all design phases. Powerful automated operations and electric checks. Comprehensive outputs for manufacturing or documentation. Native format library and design data administration. Circuit diagrams, connection list, layout plans, and reports are always up-to date and synchronized.

OneTest Embedded simplifies the automation of creating and deploying component test harnesses, test stubs, and test drivers with ease. With just a single click from any development environment, users can profile memory usage and performance, evaluate code coverage, and visualize how programs execute. This tool also enhances proactive debugging, helping developers identify and rectify code issues before they escalate into failures. It fosters a continuous cycle of test generation by executing, reviewing, and enhancing tests to quickly achieve comprehensive coverage. Building, executing on the target, and generating reports takes only one click, which is essential in preventing performance problems and application crashes. Furthermore, OneTest Embedded can be customized to accommodate unique memory management techniques prevalent in embedded software. It also provides insights into thread execution and switching, which is crucial for gaining a profound understanding of the system's operational behavior under testing conditions. Ultimately, this powerful tool streamlines testing processes and enhances software reliability.