Catch up on stories from the past week (and beyond) at the Slashdot story archive

 



Forgot your password?
typodupeerror
×

Making Modifications to Your Computer Workspace? 136

Anonymouse Cowherd asks: "I've got an ancient engineer's desk at work, and the thing is seriously not very comfortable for long-term computer usage, so I'm trying to think of things I can do to it to make it more livable. Has anyone had to live with this situation and been forced to hack their own office furniture, or wished that they had? If you did, what modifications did you make to improve your space?"
This discussion has been archived. No new comments can be posted.

Making Modifications to Your Computer Workspace?

Comments Filter:
  • To get a good ergonomic chair of any height desired (such as to go with a tall engineer's desk), I took a barstool (gives you the proper forward leaning seat surface along with a nice built-in swivel), cut off the legs to the right height for me personally, then added a padded surface to the seat (memory foam tie-down seat cushion for $5 at walmart) and some lumbar support (adjustable lumbar support office-chair cushion from Staples for $10). The result was a chair custom sized for me that is good enough for my "computer professional's back" that a chiropractor took photos of it to send to all his buddies in the profession as an example of the perfect office chair.
  • by woobieman29 ( 593880 ) on Monday April 10, 2006 @09:56PM (#15103021)
    Couple of things to look into:

    1) If the keyboard and mouse are at the wrong height (forearms should be basically horizontal to the ground while keying / mousing) look into one of the under-dek mounted slide-out keyboard and mouse trays made by folks like Kensington, Steelcase, etc. Ebay or a local used office furniture or used computer store are places to look for this stuff on the cheap. Look for a tray that adjusts height, angle and left/right orientation, and also make sure that it slides under the desk to get it out of the way when not in use.

    2) At the minimum, get a comfotable chair that either a) fits you natively, or b) has enough adjustment to make you comfy.

    3) If the monitor is not at the right height (Your eyes should be level with the top edge of the viewable area when you are looking at it with your head tilted slightly down) either adjust the stand or place something STURDY and flat underneath the monitor to raise it to the proper height.

    4) For optimum comfort, make sure that your mouse is located as close to your centerline as possible. This is a bigger deal than many people think - having your arm angled out to the side while mousing can be a major casue of Repetitive Stress Injuries.

    And oh yeah, take frequent breaks!

  • Surrounded. (Score:5, Informative)

    by quag7 ( 462196 ) on Monday April 10, 2006 @10:24PM (#15103154) Homepage
    I have an L-shaped desk with Gorilla Racks behind each long side of it and then one perpendicular to the short edge of one side. This allows me to put the computers up on the racks themselves, preserving desk space but still within reach (the lowest shelf is just slightly higher than the desk itself. This allows me to easily run wires for any equipment I do leave on my desk, such as the phone. Also, books and other equipment (like CD-ROM drives) are easily reachable.

    I think with chairs, I've just gotten lucky. The chair I use is the pefect size for the desk and I rarely feel any physical fatigue even over long sessions.

    I have most of my systems on the shelves oriented in such a way that the power supply fan blows toward the window, so I can easily open that up and exhaust the hot air that builds up. In addition, I have the machines which have cables I may need to unplug or switch on a regular basis on the shelf perpendicular to the short edge of the desk, so I can easily walk around behind the shelves and have full access to the back of the case.

    A picture of how I did this with shelves is here:

    http://www.computerrooms.org/viewer.php?pointer=11 41799282&year=2005 [computerrooms.org]

    Those Gorilla Racks are worth seeking out, by the way - I buy them at Costco and they have a capacity of something like 600 pounds per shelf (!) I never get close to this of course, but they feel steady in such a way that I don't mind piling equipment on there. The shelves can be adjusted to just about any height - you choose.

    Preserving desk space is key to my own sanity since I often have books or printouts I am working from, along with my lunch, etc.

    Another thing which helps is lighting. I have found that the best lighting for me is not very high above my desk. This allows my desk space to be flooded with light for reading, without diminishing the contrast of the monitor. Accordingly I use a light with a lampshade on it and have the lamp actually on my desk, at the edge.
  • Weird... (Score:2, Informative)

    by Trracer ( 210292 ) on Tuesday April 11, 2006 @02:02AM (#15103947) Homepage
    Your employer doesn't supply you with a proper desk? Here in Sweden we have laws governing the workplace and my employer do listen if I need something new. I currently have one of those desks that I can either sit or stand at (goes up and down with motors) and I have a chair a chiropractor has fitted for me.
    When it comes to keyboard/mouse I can buy whatever I want and get reimbursed on my salary. I work for that big blue IT-company btw. (Excuse any spellingerrors etc etc, English is not my first language).

"Gravitation cannot be held responsible for people falling in love." -- Albert Einstein

Working...