2) The real #1 is still the human brain.
Somehow I doubt that the human brain can beat these system in a Linpack benchmark.
Microphone port pumps some current into whatever is connected to it (to power the microphone up) Line In doesn't provide any power, it only analyses incoming signal from external source, and will be often separated through transoptors or the like to protect the hardware from overcurrent from difference of potential between the devices.
Not sure why this was modded +5 informative; it's a load of hooey...
Not sure why this was modded +5 informative; it's a load of hooey...
Normal dynamic microphones are passive and do not require any external power to "power the microphone up". They generate a small current, usually from a coil moving inside a magnet. This is why you need a pre-amp of some kind to bring your mic-level signal up to a line-level signal that a regular amp can deal with. Your sound card has this built in.
If you have a condensor microphone, then it will need external power of some kind to function. This usually comes in the form of phantom power (+48V usually) over a balanced twisted pair microphone wire. I can promise you that your average soundcard (and pretty much anything with 1/8" jacks) does *not* supply phantom power. You need an external power supply of some kind to use a condensor mic with your soundcard.
So yeah, you accurately described how a professional setup works. It just doesn't apply to the situation we're talking about here.
The mic input on a soundcard does have a voltage (usually +5V) applied to the ring of the input. The microphones typically used with a computer are neither of the condenser nor dynamic type, but are electret microphones.
(1) Never draw what you can copy. (2) Never copy what you can trace. (3) Never trace what you can cut out and paste down.