An anonymous reader writes from an article on DigitalTrends: After months of analysis and experimentation, a team of researchers from Johns Hopkins University's Applied Physics Lab announced the successful development of a reliable sea-to-air UAV. Dubbed the Corrosion Resistant Aerial Covert Unmanned Nautical System -- or CRACUNS for short -- Johns Hopkins' drone has the ability to reside for months underwater without deteriorating or decaying. Once given the signal, the CRACUNS would then rise to the water's surface and begin flight, capable of undertaking a variety of missions.
In order for the drone to accomplish this, the team had to develop a body that contained no structural metal parts or machined surfaces. The composite-body had to not only be extremely lightweight, but able to be submerged in water and hold up to constant water pressure. CRACUNS project manager Jason Stipes said in a published press release, "Engineers at APL have long worked on both Navy submarine systems and autonomous UAVs. In response to evolving sponsor challenges, we were inspired to develop a vehicle that could operate both underwater and in the air."

An anonymous reader writes: MIT's Mediated Matter Group has published a paper and a video about their new technique for 3D printing with glass. The top part of their printer is a kiln that heats the glass to temperatures of approximately 1900 degrees Fahrenheit, causing it to melt. The molten glass is then passed through an alumina-zircon-silica nozzle, which moves just like an extruder on normal 3D printers. "The frame of the printer is constructed out of 80/20 aluminum stock and square steel tube. They used three independent stepper motors and a lead screw gantry system and drivers which were controlled via an Arduino and a RAMPS 1.4 Arduino shield." The device's makers say, "The tunability enabled by geometrical and optical variation driven by form, transparency and color variation can drive; limit or control light transmission, reflection and refraction, and therefore carries significant implications for all things glass."

sciencehabit writes When predators get close, the bright, orange-lipped "disco clam" flashes them to scare them off. But it's not just the light that's important. Researchers have found that the clam has sulfur in its fleshy lips and tentacles and suspect that, like another clam species that drop tentacles laden with sulfuric acid to deter predators, the disco clam's sulfur also gets converted into a distasteful substance. The flashing may warn predators away, similar to the bright orange of a monarch butterfly warning birds of its toxic taste.

jandersen writes "I am the system manager in charge of a smallish server room (~50 servers, most in racks), and I am going to buy a set of tools; but first I want to hear what other people think would be a good idea. Certainly a range of good quality screwdrivers — slotted, Phillips, Pozidriv, Torx. But what else? Tape measure? Spirit level (for aligning the racks)? Any meters or cable testers? A wood lathe? I can probably get away with a budget of a few hundred GBP, but there ought to be some mileage in that."