Eveen better, play divx by upgrading the firmware (Score 1)

The HD745 Firmware Hack gives your Samsung HD841 DivX playback, MP3 DVD and HDCP Free (1080i via Component Input). Section 1: Go to (and join) - http://groups.yahoo.com/group/ZoranDVD > Files (Samsung HD841 Firmware) Read - DivX_update_manual.pdf (How to create firmware update CD) Download Firmware - 745ver2for841.zip Download and read - 745to841HowTo.zip (Firmware modification instructions) Make your Firmware Update Disc and follow the update instructions. Section 2: After the update your DVD paler will default to PAL video. To change it back to NTSC do the following: Start from power off and no disc. 1. Power on and give it a few seconds to power up 2. Press Menu. The selected menu is not correct, so... 3. Up Arrow ONCE puts you at setup. 4. Right Arrow goes into setup. 5. Down Arrow TWICE to highlight Display. 6. Right Arrow to select Display settings. 7. Down Arrow FOUR (4) times to get to PAL/NTSC. 8. Right Arrow changes from PAL to NTSC (and pushing again changes back to PAL). Section 3: If you're *not* using the HDMI/DVI output skip this section. DO THIS WITH THE TRAY EMPTY (no disc). The HD745 Firmware update does not default to P-SCAN&DVI output. To put it back into P-SCAN&DVI press the VIDEO SEL button on your remote, slowly (about every 10/15 seconds), until your picture comes back. Make sure you to this slowly because once you land on the right selection it will take your display a few seconds to detect the output from your DVD player and display it on the screen. Section 4: After the update your DVD player will default to region 2. To make your DVD player Region Free (Region 9, ALL REGIONS) do the following (this only works after the HD745 Firmware update): 1. Turn on player with no disc in the tray. "No disk" appears on screen. 2. Press the "Repeat" key on the remote. 3. Press "57538" on the remote. A number should appear on screen, indicating your player's current region (e.g. "2"). 4. Press the number for your required region (e.g. "1") or "9" for region-free/all-regions. The number will appear on screen, replacing the previous number (from step 3). 5. Press "Open/Close Tray" and leave the tray open for a few seconds. 6. Press "Power On/Off". The tray closes automatically and the player turns off. Next time you turn it on, it is region free (or whatever Region you selected in step 4). That's it, you're done! Now got through you're setup for audio and video and you're done. - Enjoy