Alternatives to fabPlane

Altium Develop is a collaborative platform for modern electronics engineering teams that connects requirements management, PCB design, systems engineering, and manufacturing workflows. Built on Altium Designer and Altium 365, the platform provides a centralized environment for design collaboration, requirements traceability, BOM management, supply chain visibility, and engineering change management. Altium Develop helps hardware organizations maintain alignment between requirements, design decisions, and manufacturing outcomes while supporting distributed engineering teams through cloud-based collaboration. Core Features: • PCB design collaboration • ECAD-MCAD co-design workflows • Component and supply chain visibility • BOM and engineering change management • Design review and approval workflows • Cloud-native team collaboration • Requirements management and traceability Used by electronics teams building complex PCB-based products, Altium Develop is frequently evaluated alongside Cadence OrCAD, Cadence Allegro, Autodesk Fusion Electronics, KiCad, Siemens Xpedition, and SOLIDWORKS PCB for organizations seeking greater collaboration and lifecycle visibility across hardware development programs.

Copperhead is a collaborative open-source AI platform aimed at aiding hardware teams in the design, validation, and production of circuit boards. By simply detailing a modification or submitting a product brief, users can prompt the agent to make precise edits to actual KiCad files, revise any related documentation, and perform KiCad's built-in checks until all pass successfully. The comprehensive workflow encompasses various stages, including specification, architecture, component selection, schematic design, layout, output generation, firmware creation, and development strategy, ensuring that each phase produces a tangible artifact on disk before progressing. Validation gates check for budget adherence, logical subsystem analysis, datasheet-supported component numbers, ERC-compliant schematics, DRC-compliant layouts, generated Gerber files, firmware source code, and comprehensive bring-up plans. Additionally, Copperhead is equipped to handle modifications for existing boards: users can direct it to a KiCad repository, start the project, and request specific changes. The edits made are targeted adjustments to KiCad source files, ensuring that changes are minimal and easily reviewable while leaving other sections intact. This approach allows for a streamlined revision process that minimizes disruption to the overall project.

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

The schematic editor allows you to create unlimited designs. There are no paywalls for unlocking features. A built-in schematic editor and an official library of schematic symbols will help you quickly get started with your designs. Professional PCB layouts can be made with up to 32 copper layers. KiCad now includes a push-and-pull router that can route differential pairs and adjust trace lengths interactively. KiCad also includes a 3D viewer that you can use to view your design in an interactive canvas. To inspect details that are difficult or impossible to see in a 2D view, you can rotate and pan around. Multiple rendering options make it possible to change the board's aesthetic or hide and show certain features. The schematic capture in KiCad is fast and efficient. It also includes all the tools necessary to do so. The interface is focused on productivity. As large designs can be broken into hierarchical subsheets, there are no limits to their complexity.

ProtoFlow is an advanced electronic design automation (EDA) tool specifically designed for schematic capture and PCB design, utilizing AI technology. It allows users to describe circuits in straightforward language, which generates an editable initial draft, enabling the search for actual electronic components and their footprints, along with datasheet inspections to ensure accuracy. Users can tidy up wiring and seamlessly continue working in familiar schematic and board editors. The tool includes features such as ERC/DRC reviews, 3D board visualization, Git-backed version control with visual diffs, collaborative comments, and outputs for manufacturing, which encompass Gerber files, drill files, BOMs, and placement files. Importantly, designs are maintained as editable geometries, and it is crucial for users to double-check symbols, footprints, connections, and manufacturing details prior to production. Additionally, ProtoFlow has the capability to read and write native KiCad files, allowing for easy integration into existing EDA processes. A free plan is accessible without the need for a credit card, while paid plans offer enhanced AI capabilities. This tool is tailored for hardware engineers, makers, students, educators, researchers, and startups in the electronics sector, making it a versatile choice for various users in the field. Furthermore, its intuitive interface and collaborative features make it an ideal option for teams working on electronic projects.

SpeedUp eliminates the monotonous process of creating circuit schematics by allowing you to simply describe your product's requirements and upload relevant component datasheets, with the AI managing everything else — from generating an organized block diagram to designing each module's schematic and conducting electrical rule checks. You have the opportunity to review and adjust the block diagram, ensuring you maintain oversight while avoiding the strenuous workload. Once the design is complete, you can effortlessly export a full KiCad project with a single click. SpeedUp is ideal for both seasoned hardware engineers eager to accelerate their prototyping efforts and makers aspiring to transform their innovative ideas into reality, reducing the timeline from concept to schematic from several weeks to mere minutes. Additionally, this streamlined process fosters creativity and efficiency, enabling users to focus on refining their ideas rather than getting bogged down in technical details.

Flux is a browser-based electronic design automation (EDA) platform for designing printed circuit boards. It brings schematic capture, PCB layout, simulation, routing, and design rule checks into a shared online workspace. Its AI hardware design assistant helps turn plain-language circuit requirements into schematics, research components, place parts, route traces, and review designs. Engineers can edit the results, define design constraints, and review the board before manufacturing. Multiple users can work on the same design in real time, leave comments, and manage project permissions. Reusable community circuits and component libraries help teams start new designs, while live component pricing and availability support part selection. Flux exports Gerber, bill of materials (BOM), and pick-and-place files. It accepts Altium ASCII and Cadence EDIF schematics and KiCad component libraries. These imports do not include PCB layouts. Flux is used by electronics engineers, hardware startups, and product teams. A trial includes limited AI usage; after the trial, a paid plan is required to edit or export private projects and use AI. Public-project and community access remain available.

Engineers at leading electronics firms around the globe utilize Quilter for their design needs. Fully compatible with your pre-existing designs and libraries, Quilter ensures that all completed projects are returned in the original file format for easy inspection, modification, and export. To begin, simply design your schematic with your preferred ECAD application, such as Altium or KiCAD, and upload both your schematic and an empty board file. Quilter automatically identifies the relationships between components, allowing you to define any design constraints for your board with ease. We rigorously validate tolerances against top fabrication houses to ensure reliability. Quilter evaluates numerous candidates and confirms that every design meets design rule checks (DRCs). Once you have reviewed the options, you can select your preferred design and download the necessary files for fabrication and testing. Unlike traditional auto routers, Quilter operates more like a human designer, effectively managing all PCB design elements, including the routing of traces, placement of components, board stackup management, and the generation of custom pours. This innovative software makes the entire design process more intuitive and streamlined, enhancing productivity for engineers.

DipTrace is a professional PCB design suite from Novarm Ltd, in continuous development since 2004 and used by over 30,000 engineers across 50+ countries. Companies in aerospace, defense, medical devices, and industrial electronics rely on it for production work. The suite covers the full design flow in one environment. Schematic Capture handles multi-sheet hierarchical projects with electrical rule check, a Digital SPICE Simulator for analog and digital circuits, and cross-selection with the board. PCB Layout provides interactive push-and-shove editing, where moving or rotating a placed component displaces neighbouring traces and vias as you work, and dragged traces route themselves around pads, keepouts, and existing copper. Designers choose whether design rules are enforced at all times or violations are permitted deliberately. High-speed work is supported through differential pair routing, length matching, layer stackup management, and a PCB calculator. Manufacturing output covers Gerber X2, ODB++, IPC-2581, NC Drill, and STEP for mechanical CAD. Version 5.3 introduced a native XML project format that mirrors the binary format feature for feature, making designs practical to keep under Git or another version control system. Component sourcing runs through a database-powered search with Mouser integration and SnapEDA access to more than 10 million parts. Projects import from Altium, KiCad, Eagle, OrCAD, EasyEDA Pro, Pulsonix, and PADS. DipTrace runs natively on Windows, macOS, and Linux. Licensing is perpetual — bought once, with no subscription or maintenance fees — across five editions starting at $75. Technical support is provided to every user, including those on the free edition.

CircuitMaker is more than an Altium EDA software tool. It's a community of creative people, sharing design content, and working together to create circuits and electronic products for a better tomorrow. You need tools that don't limit your creativity or hold you back from turning great ideas into products. CircuitMaker gives you all the power to create high-quality schematics and Printed Circuit Boards. There are no artificial limitations on board area or layer count. It's also free. CircuitMaker is a place where you can find great reference designs and promote and rate other projects. You can even create teams to collaborate on design projects. We believe you deserve better tools to help you turn your great ideas into reality. CircuitMaker was born. CircuitMaker is not only a community for electronic design content but also Schematic and PCB design software.

CircuitSim is a comprehensive SPICE circuit simulation tool featuring a library of over 3,000 components and a contemporary schematic editor, all accessible online for free without the need for installation. Designed for use by students, educators, and professionals alike, it operates directly in a web browser, making it compatible with Chromebooks and secured school laptops without requiring administrative access. Users can perform seven types of analyses, including interactive and transient analyses, with results displayed on oscilloscope-style graphs and the ability to place probes at any point in the circuit. Additionally, users can create custom components from SPICE model text or import symbols from KiCad, enriching the simulation experience. CircuitSim also supports the import of Multisim Live designs before its scheduled retirement on September 15, 2026, making it a unique browser-based solution that can handle .csim, .ms14, and .msjs files, preserving wiring, component placement, net labels, probes, and simulation configurations. Furthermore, classroom licensing options are available, providing features such as seat assignments, anonymous student seating, and private student project spaces to enhance the educational experience. This ensures that educators can effectively manage their classroom environments while leveraging advanced simulation tools.

Multisim™ software combines industry-standard SPICE simulation with an interactive schematic environment that allows for the immediate visualization and analysis of electronic circuit behavior. Its user-friendly interface is designed to assist educators in reinforcing circuit theory and enhancing students' retention of concepts throughout their engineering studies. By integrating robust circuit simulation and analysis into the design workflow, Multisim™ enables researchers and designers to minimize the number of printed circuit board (PCB) prototypes needed, thus reducing development costs significantly. Specifically tailored for educational purposes, Multisim™ serves as a teaching application for analog, digital, and power electronics courses and labs. With its comprehensive suite of SPICE simulation, analysis, and PCB design tools, Multisim™ empowers engineers to efficiently iterate on their designs and enhance the performance of their prototypes while fostering a deeper understanding of electronic principles. This software not only streamlines the design process but also cultivates a hands-on learning experience for students in the field of electronics.

Cadence Celsius PowerDC technology offers efficient DC analysis to ensure reliable power delivery. This includes electrical/thermal simulations for maximum accuracy. The Celsius PowerDC technology quickly identifies areas of excessive IR drop and thermal hotspots to minimize the risk of failure of your design. Highly accurate, even with complex designs that have multiple voltage domains, complex plane structures and multiple voltage domains, providing conclusive IR analysis for board and package. DC simulations can be automatically set up using PowerTree Technology (source/sink defintions) captured during the schematic stage of design. Support for multi-structures, including stacked boards, multiple die, and all popular packaging types.

Trace is an innovative PCB design platform tailored for hardware teams, guiding them from initial concept to a fully manufactured board. It integrates advanced schematic capture and PCB layout tools with smart agents that comprehend the context of hardware design. Users can articulate their project requirements in natural language, enabling Trace to conduct thorough research, produce complex multi-sheet schematics, interpret datasheets, recommend components, verify their availability in real time, arrange parts, route multi-layer boards, optimize matched-length signals, and perform essential checks like ERC and DRC along with design reviews. With a comprehensive library boasting over 30,000 symbols and footprints, the platform sources data from leading electronic distributors. Additionally, Plan Mode delves into intricate tasks, poses clarifying questions, devises a detailed action plan, and initiates execution only after receiving user approval. Moreover, TraceRules ensures that preferences regarding components, layout restrictions, and manufacturing objectives are consistently maintained throughout user interactions, facilitating a smoother design process. This comprehensive approach not only enhances efficiency but also streamlines collaboration within hardware teams.

EAGLE is a powerful electronic design automation (EDA) tool that empowers printed circuit board (PCB) designers to effortlessly integrate schematic diagrams, component placement, PCB routing, and a comprehensive library of resources. With EAGLE, you can elevate your design process through an extensive array of PCB layout tools. The software allows you to easily drag and drop reusable design blocks across different projects while ensuring that schematic and PCB circuitry remain synchronized. You can validate your schematic designs using a complete suite of electronic rule checks, ensuring that your designs adhere to specifications. The automatic synchronization of changes between your schematic and layout enables you to concentrate on the creative aspects of your work. Additionally, the design flow is fully controllable, allowing you to avoid unforeseen issues with customizable PCB design rules and constraints. The worry-free libraries are prepared for your next project, enabling you to dynamically find and place parts that are linked to an ever-expanding catalog. This integration of tools and features makes EAGLE an invaluable asset for designers striving for efficiency and precision in their PCB projects.

Examine RF and microwave circuits and systems using rapid simulation and robust optimization tools that enhance your design process. Delve into performance trade-offs through the integration of automatic circuit synthesis technology. PathWave RF Synthesis (Genesys) offers foundational features that cater to all designers of RF and microwave circuit boards and subsystems. With PathWave Circuit Design, you can uncover RF design mistakes that conventional spreadsheet analyses often overlook. This introductory design platform, which encompasses circuit, system, and electromagnetic simulators, enables you to approach design reviews with greater assurance prior to the realization of hardware. With just a few clicks, you can observe the automatic synthesis and optimization of your matching network. After that, easily transfer your design to PathWave Advanced Design System (ADS) to incorporate it into more intricate designs, ensuring seamless integration and enhanced functionality. By leveraging these tools, you can streamline the design process and enhance the overall efficiency of your RF and microwave projects.

SOLIDWORKS PCB streamlines the process of designing Printed Circuit Boards (PCBs) efficiently while fostering exceptional collaboration between electrical engineers and 3D mechanical design teams. This integration provides a significant benefit in scenarios where close ECAD-MCAD cooperation is vital for the successful development of electronic products. Users can define rigid-flex areas, layers, and stack thicknesses, facilitating the design of single board rigid-flex PCBs. Additionally, the regions of the rigid-flex layer stack can be specified with bend lines and angles, which can then be validated through 3D folding and component clearance checks to ensure the accuracy of the layout. Project management, design files, and documentation are seamlessly handled with the SOLIDWORKS PCB-PDM Connector, which enhances the PDM-based design and data management workflow. This system securely stores and organizes design data for quick access, alleviates worries related to version control and potential data loss, and allows for collaborative work on design data from various locations. The unmatched integration and collaboration between ECAD and MCAD offered by SOLIDWORKS ensures that all design data is unified, promoting efficiency and innovation in the product development process. This powerful synergy ultimately leads to improved product quality and faster time-to-market.

PathWave ADS streamlines the design process by providing integrated templates that help users start their projects more efficiently. With a comprehensive selection of component libraries, locating the desired parts becomes a straightforward task. The automatic synchronization with layout offers a clear visualization of the physical arrangement while you create schematic designs. This data-driven approach enables teams to assess if their designs are in line with specifications. PathWave ADS enhances design confidence through its display and analytics features, which generate informative graphs, charts, and diagrams. Users can expedite their design process with the help of wizards, design guides, and templates. The complete design workflow encompasses schematic design, layout, as well as circuit, electro-thermal, and electromagnetic simulations. As frequencies and speeds continue to rise in printed circuit boards (PCBs), ensuring signal and power integrity is critical. Issues arising from transmission line effects can lead to electronic device failures. It is essential to model traces, vias, and interconnects accurately for a realistic simulation of the board, ensuring that potential problems are identified and mitigated early in the design phase. This multifaceted approach not only improves efficiency but also enhances the overall reliability of electronic designs.

Speed up your product launch with AllSpice, which facilitates contemporary revision control and teamwork for electronic designs. Transform lengthy, in-person meetings that are difficult to coordinate into efficient, asynchronous design reviews conducted online. Manage your design evaluations similarly to how you would handle a pull request. Streamline your review processes by automating the creation of review packages. Produce PCB, schematic, and BOM redlines that automatically emphasize any modifications in your design. Think of it as a software diff but tailored for circuits rather than code. Avoid repeating past errors by developing templates and checklists that automatically fill in details for new design reviews, helping you and your team remember key points to consider for future projects. Effective hardware development begins with improved design evaluations, allowing you to initiate, merge, or approve requests while sharing design updates and soliciting feedback. Additionally, provide external team members, such as mechanical or firmware engineers, with a browser-based view of your designs to enhance collaboration and communication. This approach not only streamlines the process but also ensures that all stakeholders are aligned and informed.

CAM350® stands out as the recognized standard within the industry for the processes of verification, optimization, and output generation, playing a crucial role in facilitating efficient PCB fabrication as part of DownStream Technologies' comprehensive manufacturing data preparation solution. Given the intricacies of modern PCB designs, thorough verification is essential before handing them over to fabricators to guarantee a smooth and prompt production of bare boards. Issues that emerge during the fabrication phase can severely disrupt production timelines, lead to expensive design alterations, and necessitate changes that could undermine the original design's integrity and purpose. By meticulously inspecting, preparing, and validating PCB designs prior to their manufacturing release, companies can significantly boost efficiency, minimize the chances of design re-spins, and, most importantly, enhance the likelihood of delivering successful electronic products more quickly and at a reduced cost. This proactive approach not only streamlines the production process but also fosters greater confidence in the final product's quality and reliability.

Simplify your process by choosing Pad2Pad to handle the entire production of your printed circuit boards. Whether you're an individual or a company, Pad2Pad offers manufacturing and assembly services for PCBs tailored to your needs. Utilize our complimentary PCB design software to design, price, and order your boards, or opt for an instant quote by uploading your gerber files directly. From personal projects to large-scale commercial applications, Pad2Pad serves as your all-in-one resource for custom circuit board design, production, and assembly. Whether you require just one bare PCB for a prototype or a bulk order of 100,000 fully assembled units, Pad2Pad ensures a seamless transition from your initial layout to the final product. Our commitment to rigorous circuit testing and adherence to high-quality production standards underscores our dedication to excellence in the PCB manufacturing sector. With Pad2Pad, you can trust that your project is in capable hands, ready to meet your specific requirements and deadlines.

ZenitPCB Layout serves as an outstanding tool for generating professional printed circuit boards (PCBs). This user-friendly and adaptable CAD software enables you to complete your projects efficiently within a short timeframe. Available as freeware for personal or semi-professional use, it is restricted to 800 pins, effectively distinguishing between hobbyist and professional endeavors. With ZenitPCB Layout, you can initiate your designs from either a schematic capture or directly from the layout. The software is equipped with all necessary features to produce high-quality PCBs, accommodating both single-sided and double-sided designs, while adhering to individual project requirements or general guidelines through net class specifications. Additionally, for enhanced oversight of your project, you can examine the generated Gerber files using the ZenitPCB GerberView tool, ensuring that every detail meets your expectations. This comprehensive approach makes ZenitPCB Layout a valuable asset for anyone involved in PCB design.

Ansys HFSS is a versatile 3D electromagnetic (EM) simulation tool used for the design and analysis of high-frequency electronic devices such as antennas, interconnects, connectors, integrated circuits (ICs), and printed circuit boards (PCBs). This powerful software allows engineers to create and evaluate a wide range of high-frequency electronic products, including antenna arrays, RF and microwave components, and filters. Renowned among engineers globally, Ansys HFSS is essential for developing high-speed electronics utilized in various applications like communication systems, advanced driver assistance systems (ADAS), satellites, and Internet of Things (IoT) devices. The software's exceptional performance and precision empower engineers to tackle complex challenges related to RF, microwave, IC, PCB, and electromagnetic interference (EMI) issues. With a robust suite of solvers, Ansys HFSS effectively addresses a myriad of electromagnetic challenges, making it an indispensable resource in the field of electronic design. As technology progresses, the relevance of such simulation tools becomes increasingly critical in ensuring optimal performance in modern electronic systems.

Ansys RaptorH is a sophisticated electromagnetic modeling tool that excels in simulating power grids, entirely custom blocks, spiral inductors, and clock tree structures. It employs high-speed distributed processing to generate precise, silicon-validated S-parameter and RLCk models. One of its standout features is the ability to analyze partial or incomplete layouts during the design process, offering users the flexibility to utilize either the versatile HFSS engine or the specialized RaptorX engine optimized for silicon applications. Additionally, Ansys RaptorH extracts electromagnetic models even at the pre-LVS stage for various routing and layout designs, including solid or perforated planes, circular shapes, spiral inductors, and MiM/MoM capacitors, all while automatically configuring boundary conditions. Its user-friendly graphical interface facilitates point-and-click net selection and enables what-if scenarios for better design insights. Moreover, RaptorH is fully compatible with all leading silicon foundries and supports encrypted technology files, ensuring seamless setup for analyses using either the HFSS or Raptor engines. This comprehensive integration not only streamlines the design workflow but also enhances the accuracy of electromagnetic simulations significantly.

High-quality online PCB design software that offers complimentary real-time technical assistance is available. PCB Artist boasts capabilities like multi-page schematics and Netlist import, making it a powerful tool for engineers. Advanced Circuits' online PCB design platform is user-friendly and stands out as the finest free PCB layout software on the market. Customers consistently express their appreciation for our PCB design software, highlighting its reliability and effectiveness. When it comes to crafting printed circuit boards, we ensure you achieve optimal results, ultimately saving you both time and financial resources in the long term. Additionally, our commitment to customer satisfaction sets us apart in the industry.

The MPLAB® Mindi™ Analog Simulator streamlines the process of circuit design and mitigates associated risks by allowing users to simulate analog circuits before moving on to hardware prototyping. Utilizing a SIMetrix/SIMPLIS simulation environment, this tool offers the flexibility of employing SPICE or piecewise linear modeling, catering to a broad spectrum of simulation requirements. In addition to its robust simulation capabilities, the interface incorporates exclusive model files from Microchip, enabling accurate modeling of specific Microchip analog components alongside standard circuit devices. This versatile simulation tool can be easily installed and operated on your local PC, ensuring that once it is downloaded, an Internet connection is unnecessary for its operation. Consequently, users benefit from quick and precise analog circuit simulations that do not rely on external servers, enhancing the overall efficiency of the design process. Users can confidently run simulations directly on their computers, experiencing the reliability and speed that comes with offline capabilities.

The Cadence Allegro X Design Platform is the best solution to navigate modern electronic complexity and support any PCB needs. It is a full-stack platform that provides a highly integrated and scalable environment for advanced system design. The Allegro X Design Platform allows your global teams to collaborate effectively and simultaneously to reduce project risk, lower production costs and guarantee design compliance. With Allegro X, electrical engineers and PCB designers can make data-driven decisions using integrated analysis workflows and constraints to reduce turnaround time, ensure product reliability and first-time right manufacturing success.

Altium's PDN Analyzer tool integrates with Altium Designer. This allows you to easily troubleshoot issues such as insufficient or excessive copper or uncontrolled voltage drops. You can also detect marginal voltage at critical power points, copper islands or peninsulas, and other issues that could be present in your PCB power system. PDN is the power system for active circuits on printed circuit boards. This includes all interconnections between the voltage regulator module, the metallization pads and die on integrated devices that are used for supply and return power. The entire length of the power delivery network must meet the IC supply voltage limits. Validating your power budget accurately means taking into account the minimum and maximum device limits, worst case voltage drops, combined return-path currents, and other factors. PDN Analyzer will show you exactly where these problems are.

Ultiboard is a powerful software solution for designing and laying out printed circuit boards (PCBs), which works hand-in-hand with Multisim to streamline the development of PCB prototypes. The software provides a user-friendly environment for efficient PCB design layout and routing, allowing for customization to suit individual needs. Its versatile tools enable precise manual placement of components and copper, which is essential for defining critical elements of the board. Additionally, the automated features facilitate a faster design process. Users will find that the advanced spreadsheet view, along with various toolboxes and design wizards, simplifies the management and definition of board layouts. The integration with Multisim ensures easy schematic transfers to PCBs, and the capability for forward and backward annotation supports effective design iteration management. Furthermore, Ultiboard allows for the straightforward export of industry-standard file formats like Gerber and DXF, ensuring a seamless transition from schematic creation to layout finalization. This comprehensive approach not only emphasizes data and automation but also supports research and validation, underlining our commitment to helping engineers create innovative solutions for the future. Ultimately, Ultiboard empowers users to bring their electronic designs to life with confidence and efficiency.

PCB123 is a full-featured design tool for Printed Circuit Board Designers of all levels. PCB123 was first released as a free tool in 2002. We don't get paid unless you design your PCB. We have professionals who can help you with your questions to ensure your success. What are you waiting for? It's easy-to-use and supports all features. We don't throttle the tool or charge for a license to provide you with full functionality. We get paid when boards are ordered - it's that easy. Software developer's kit with programmatic access the PCB123 database. This allows you to expand the tool for your purposes. Our PCB layout specialists can help you save money and speed up your PCB prototyping process. To get a quote, submit basic design information.

As the amount of electronics content grows, so does the complexity of design processes. This video illustrates how PADS Professional offers robust PCB design functionalities in a cost-effective and user-friendly package tailored for hardware engineers. The Siemens product suite plays a crucial role in facilitating the digital transformation of electronic systems design. Discover how it is ideally suited to provide digitally integrated platforms for product ideation, paving the way for the next generation of successful market products. By participating in this experience, you can learn how to create a design from inception to completion, showcasing the ease of utilizing its sophisticated technology, which includes features like rigid-flex design, RF design, and advanced routing techniques, such as HDI and area rules, all aimed at enhancing your workflow efficiency. With intuitive navigation for projects and designs, comprehensive hierarchical support, and advanced tools for managing rules and attributes, you will be well-equipped to achieve your PCB design objectives more effectively than ever before. Engage with this content to elevate your understanding of modern PCB design strategies and technologies.

BluePrint-PCB® seamlessly integrates with your PCB CAD system and/or CAM350® to facilitate the rapid generation of detailed electronic drawings essential for the processes of PCB fabrication, assembly, and inspection. This innovative tool recognizes its task of producing a PCB document and efficiently imports the complete PCB CAD database in a single action, enabling the automatic creation and linking of countless PCB views and details while preserving design intelligence and surpassing limitations typically encountered with both PCB and mechanical CAD systems. Consequently, the result is an electronic document that more effectively communicates the necessary instructions for successful PCB manufacturing. Users can automatically generate PCB views, details, and tables directly from PCB CAD data, eliminating the restrictions of traditional PCB CAD while maintaining the integrity of the design. Furthermore, it leverages PCB intelligence to produce common drawing elements and allows the creation of dynamic and engaging documentation that includes hyperlinks and multimedia content. Additionally, all relevant information regarding the PCB assembly is consolidated into a single electronic “release package,” enhancing organization and accessibility. This comprehensive approach not only streamlines the PCB manufacturing workflow but also fosters improved collaboration among teams.

Seamlessly repair damaged copper regions during interactive editing sessions, allowing for easy refinement of user-defined design selections. Components and enclosures can be moved within the 3D space while enjoying real-time clash detection for any violations. When faced with specific technological demands, you can take advantage of cutting-edge features like flexi-rigid design, embedded components, and chip-on-board technology to fulfill your functional needs. Pulsonix simplifies the process of generating a comprehensive Bill of Materials (BOM), pick and place lists, PCB acceptance reports, and netlists in various formats, whether you choose to use our pre-defined options or design your own. A standout feature of Pulsonix is the use of construction lines, which allow users to define guiding lines within their design, facilitating the creation of complex board outlines and aligning unconventional shapes or items. Additionally, you can establish rules for the automatic generation of naming conventions for both new and existing styles, enhancing organization and consistency in your design process. This comprehensive approach ensures that users can achieve a high level of precision and efficiency in their design workflows.

HyperLynx offers integrated capabilities for signal integrity, power integrity, 3D electromagnetic modeling, and electrical rule checking tailored for high-speed digital designs. By merging user-friendly features with automated processes, HyperLynx makes high-speed design analysis accessible for mainstream system designers, enabling early identification and resolution of potential issues within the design cycle. It seamlessly integrates with various PCB tools, making it a valuable addition to any PCB design workflow. The HyperLynx suite ensures a comprehensive analysis pipeline, fusing best-practice design rule checking with in-depth simulations for both signal and power integrity. Equipped with advanced 3D electromagnetic solvers, it produces precise interconnect models that enhance the design process. Users can assess design trade-offs during the pre-layout phase and confirm their designs before fabrication with thorough post-layout analyses. This tool supports a range of applications, including SerDes channels, DDRx memory interfaces, and general signal integrity assessments. Additionally, it simplifies the design and validation of a board's power-delivery network (PDN), facilitating compliance with impedance goals in a user-friendly setting. With its robust features, HyperLynx empowers engineers to create high-performance designs with confidence.

Aptean Cimnet ERP is tailored specifically for manufacturers of printed circuit boards (PCBs), enabling them to optimize and automate their operations, which leads to cost reductions and enhanced profitability. The manufacturing and engineering processes in PCB production require specialized features that are absent in conventional enterprise resource planning systems. Therefore, Cimnet offers focused engineering and manufacturing tools designed to address the distinct workflows and challenges faced by the PCB sector. These specialized capabilities are combined with a comprehensive suite of business management solutions that enhance efficiency and provide visibility across various functions such as quoting, inventory management, production, finance, and supply chain operations. Furthermore, Cimnet integrates effortlessly with other widely used PCB software, including CAM and pre-CAM systems. In today’s highly competitive landscape, the ability to respond promptly to customer demands is essential for achieving success. Consequently, adopting an ERP solution like Cimnet can significantly enhance a company’s agility and operational effectiveness.

Ansys Exalto serves as an advanced post-LVS RLCk extraction software that empowers integrated circuit (IC) designers to effectively address unknown crosstalk between various components within the design hierarchy by extracting lumped-element parasitics and creating precise models for electrical, magnetic, and substrate coupling. This tool seamlessly integrates with a wide range of LVS software and can enhance the performance of any RC extraction tool you prefer. With Ansys Exalto's post-LVS RLCk extraction capabilities, IC designers are equipped to make accurate predictions regarding electromagnetic and substrate coupling effects, allowing for signoff on circuits that may have previously been deemed "too complex to analyze." The models that are extracted can be back-annotated to the schematic or netlist, ensuring compatibility with all circuit simulators. As the prevalence of RF and high-speed circuits continues to rise in contemporary silicon systems, electromagnetic coupling has become a primary factor that necessitates precise modeling to ensure the successful fabrication of silicon. Overall, Ansys Exalto represents a crucial advancement in circuit design, helping engineers navigate the complexities associated with modern electronic systems.

Design Force is a revolutionary innovation in electrical design. It allows you to break down the boundaries of your electrical design process. The process of designing a product is becoming more complex. This often involves technologies that are difficult or impossible to use ECAD tools to address. Design Force allows design teams to access system-level design information as early as the planning and conceptual phases. This allows them to layout each product board while simultaneously considering the entire system view. Design Force uses the most current industry hardware and software. Users can design in a native 3D environment. This allows them to achieve optimal performance by using native 64-bit, multithreading, multicore processors. Design Force is compatible with multiple client-server implementations. You can also work from your corporate cloud.

Effortless traffic management for your service mesh. A service mesh is a robust framework that has gained traction for facilitating microservices and contemporary applications. Within this framework, the data plane, featuring service proxies such as Envoy, directs the traffic, while the control plane oversees policies, configurations, and intelligence for these proxies. Google Cloud Platform's Traffic Director acts as a fully managed traffic control system for service mesh. By utilizing Traffic Director, you can seamlessly implement global load balancing across various clusters and virtual machine instances across different regions, relieve service proxies of health checks, and set up advanced traffic control policies. Notably, Traffic Director employs open xDSv2 APIs to interact with the service proxies in the data plane, ensuring that users are not confined to a proprietary interface. This flexibility allows for easier integration and adaptability in various operational environments.

Cadence®, Sigrity X OptimizationPI™ technology performs a complete AC frequency analyzer of boards and IC package to ensure high performance and save between 15% and 50 % in decoupling capacitor costs. It supports both pre-and post-layout studies and quickly pinpoints the most cost-effective decap selections. Sigrity X OptimizePI is based on proven Cadence hybrid magnetic circuit analysis technology combined with the unique Sigrity Optimization engine to help you quickly identify the best possible placement and decap locations.

TinyCAD is a free, open-source software designed for creating circuit diagrams and is compatible with Windows operating systems. Remember, TinyCAD is completely free to use and will remain so, with no authorized sellers involved in its distribution. While assembling libraries of circuit symbols in TinyCAD can be straightforward, it often requires significant time investment. If you possess symbols that could enhance the TinyCAD experience for others, consider sharing them on this platform for communal access. The user manual for TinyCAD is bundled with the installer but is also accessible online through the TinyCAD wiki. If you identify any areas within the manual that could use improvement, feel free to contribute by editing the Wiki, which is a valuable resource for all users. Additionally, the GitHub site offers tutorials on how to effectively edit Wikis, making it easier for anyone to participate. By collaborating and sharing resources, we can all contribute to the growth of the TinyCAD community.

Electromagnetic (EM) simulation provides valuable insights prior to the physical prototyping stage. Tailor your EM simulations to enhance both speed and precision. Seamlessly integrate EM analysis with your circuit simulations to boost overall efficiency. While EM simulations can often require several hours to complete, you can significantly reduce both import and export times by linking your EM simulation software with PathWave Circuit Design software. This integration allows you to maximize your workflow by combining EM analysis with circuit simulations effectively. The 3D EM solid modeling environment enables the creation of custom 3D objects and supports the import of existing models from various CAD platforms. This is essential for preparing a 3D geometry for 3DEM simulation, which involves defining ports, boundary conditions, and material properties. Additionally, the environment includes a Finite Difference Time Domain (FDTD) simulator, which is vital for compliance testing regarding Specific Absorption Rate (SAR) and Hearing Aid Compatibility (HAC), ensuring that your designs meet necessary regulatory standards. By utilizing these advanced features, you can streamline your design process and enhance the effectiveness of your electromagnetic analysis.

Plane redefines project management by combining collaboration, automation, and intelligence into one unified workspace. From product and marketing teams to operations and engineering, Plane centralizes tasks, wikis, and approvals for true cross-functional alignment. Users can plan and execute projects using multiple views—List, Board, Timeline, or Calendar—while maintaining full transparency through initiatives and cycles. The Wiki acts as a living knowledge base where teams can co-edit, comment, and embed related work items for instant context. Powered by Plane Intelligence, users can query data, generate audit-ready actions, and let autonomous AI agents handle repetitive tasks like scheduling, tracking, and reporting. The platform supports cloud, on-premise, and fully airgapped deployments, making it ideal for industries that require strict compliance or data sovereignty. Migration tools for Jira, Asana, and Linear make switching effortless, while native integrations with GitHub and Slack streamline workflow automation. With Plane, organizations gain a shared operating model that boosts clarity, reduces tool fragmentation, and accelerates delivery.

The NGINX Service Mesh, which is always available for free, transitions effortlessly from open source projects to a robust, secure, and scalable enterprise-grade solution. With NGINX Service Mesh, you can effectively manage your Kubernetes environment, utilizing a cohesive data plane for both ingress and egress, all through a singular configuration. The standout feature of the NGINX Service Mesh is its fully integrated, high-performance data plane, designed to harness the capabilities of NGINX Plus in managing highly available and scalable containerized ecosystems. This data plane delivers unmatched enterprise-level traffic management, performance, and scalability, outshining other sidecar solutions in the market. It incorporates essential features such as seamless load balancing, reverse proxying, traffic routing, identity management, and encryption, which are crucial for deploying production-grade service meshes. Additionally, when used in conjunction with the NGINX Plus-based version of the NGINX Ingress Controller, it creates a unified data plane that simplifies management through a single configuration, enhancing both efficiency and control. Ultimately, this combination empowers organizations to achieve higher performance and reliability in their service mesh deployments.

Calico is a versatile open-source solution designed for networking and securing containers, virtual machines, and workloads on native hosts. It is compatible with a wide array of platforms such as Kubernetes, OpenShift, Mirantis Kubernetes Engine (MKE), OpenStack, and even bare metal environments. Users can choose between leveraging Calico's eBPF data plane or utilizing the traditional networking pipeline of Linux, ensuring exceptional performance and true scalability tailored for cloud-native applications. Both developers and cluster administrators benefit from a uniform experience and a consistent set of features, whether operating in public clouds or on-premises, on a single node, or across extensive multi-node clusters. Additionally, Calico offers flexibility in data planes, featuring options like a pure Linux eBPF data plane, a conventional Linux networking data plane, and a Windows HNS data plane. No matter if you are inclined toward the innovative capabilities of eBPF or the traditional networking fundamentals familiar to seasoned system administrators, Calico accommodates all preferences and needs effectively. Ultimately, this adaptability makes Calico a compelling choice for organizations seeking robust networking solutions.

InvoicePlane serves as a free and open-source invoicing application, succeeding the FusionInvoice version 1.x codebase originally created by Jesse Terry. While FusionInvoice began as open-source software, it transitioned into a commercial product with the introduction of version 2.x. The core concept of InvoicePlane revolves around providing users with an application that they can host on their own servers for straightforward invoicing and client management. It is particularly aimed at freelancers, independent contractors, and small to medium-sized enterprises that require a dependable and user-friendly invoicing solution without the high costs of premium software. Additionally, the application benefits from contributions by community members who have translated it into various languages, with plans to add even more translations in the near future. This collaborative effort not only enhances accessibility but also broadens its user base across different regions.