Alternatives to TINACloud

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

The MPLAB®, Mindi™, Analog Simulator reduces design time and design risks by simulating analog circuits before hardware prototyping. The simulation tool uses a SIMetrix/SIMPLIS simulation platform, which allows for the use of SPICE and piecewise linear modeling. This simulation environment can be used to simulate a wide range of simulation requirements. This simulation interface can be paired with Microchip's proprietary model files to model specific Microchip components as well as generic circuit devices. This simulation tool runs locally on your computer. The simulation tool is free to download and does not require an Internet connection. Also, the simulation run time does not depend on remote servers. The simulation results are fast and accurate. The simulation tool can be run directly on your PC.

TINA-TI offers all the traditional DC, transient, and frequency domain analyses of SPICE plus much more. TINA's extensive post-processing capabilities allow you to format the results in any way you like. Virtual instruments let you select input waveforms, and probe circuit nodes voltages and waveforms. TINA's Schematic Capture is a quick and easy way to get started. TINA-TI requires around 500MB. It is easy to install and can be uninstalled if desired. We bet you won't. TINA is a Texas Instruments-exclusive product from DesignSoft. This complimentary version is fully-functional but does not include some of the features that are available in the full version.

Multisim™, a software that integrates industry-standard spice simulation with an interactive schematic environment, allows you to instantly visualize and analyze electronic circuit behavior. Its intuitive interface allows teachers to reinforce circuit theory and improve theory retention throughout their engineering curriculum. Multisim™, which adds powerful circuit simulation and analysis into the design flow, helps researchers and designers decrease iterations and save development costs. Multisim™, for Education, is circuit teaching software for power electronics courses and labs. Multisim™, provides engineers with the SPICE simulation and analysis tools and PCB design tools to quickly iterate on designs, improve prototype performance, and speed up prototyping.

It allows you to design and test circuits in a flexible way, allowing you to try all "what if" scenarios. You don't have to worry about faulty components or bad connections. CircuitLogix supports mixed-signal, analog, and digital circuits. Its proven SPICE simulation provides accurate results that you can trust. 3DLab, which is included in both versions of CircuitLogix, is a virtual reality lab environment that is designed to closely mimic the appearance and functionality actual devices and instruments. 3DLab includes approximately 30 different devices, including switches, meters and lamps, as well as resistors, capacitors, inductors and fuses.

Synopsys HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

Our online circuit simulation bridges the gap between theory, and practice through an intuitive interface. It allows you design, simulate and share electronic circuits, while observing the interaction of components in real time. Directly manipulating the behavior of circuits makes learning more engaging. DCACLab is a powerful tool for educators. It enhances their lessons with interactive diagrams, live demonstrations, and video. Students can experiment and learn in a safe environment, which will lead to a better understanding of electronics. DCACLab turns frustration into hands-on understanding and learning. Discover the power of an interactive multimeter. It provides a realistic and enriching learning experience with its functions to measure ohms, voltages, and resistances. With ease and understanding, dive into the world of electronic.

Over 1 million real-time updated parts have been created. This allows you to focus on the design and you can also create or import your common libraries. EasyEDA, China's largest distributor of electronic components, supports direct links to more that 200,000 in-stock components at LCSC. Designers have access to stock, prices, and orders at any stage of design. It offers the same features as the online version but has more design areas. We have made many improvements to the product, so we recommend it. It is easy to use. You can use it faster if you have previously used other PCB tools. You can design faster, lighter, and less resource-hungry. Register and log in to use the service, there is no activation required. Local backup automatically with document retrieval at any time. You will also have backups on the cloud server. This doubles your data security.

One animated circuit is equivalent to a thousand equations or diagrams. The schematic is accompanied by animations of voltages and currents. This gives a great insight into the operation of the circuit. The real-time simulation engine was custom-built to be fast and interactive. Simulate everything from simple logic gates and resistors to complex transistor-level designs and mixed-signal circuits with just one click. You can adjust potentiometers and LED current-limiting resistors while the simulation is running. Your changes will be reflected in real-time. The mini-waveforms that appear on top of the schematic wires are different for digital and analogue signals. Digital wires are color coded, while constant analog voltages are shown in numbers. In the XY mode, any pair of time domain signals can be plotted. The grid ticks and oscilloscope scale are automatically updated to convenient values when the data changes.

You can learn electronics by using the examples in PROTO application and trying out many components. You can use transistors, diodes and resistors. You can easily analyze signals using a channel oscilloscope. During simulation you can check voltages and currents as well as many other variables. Check signals using the multichannel oscilloscope, and tune your circuits in real-time. Our app will help you with your Raspberry Pi or Arduino project. You can use PROTO to simulate logic circuits and perform digital electronics analysis.

TopSpice is a true analog/digital/behavioral mixed-mode circuit simulator for the PC. It is the most advanced SPICE simulation in its price range. It also offers compatibility, an integrated design environment that is easy to use, from schematic capture to graphic waveform analysis. TopSpice allows you to design using either text netlists (SPICE) or schematic drawings. All design and simulation features are available in either the schematic editor or netlist editor. TopSpice comes with a full-featured mixed mode mixed-signal simulator that can simulate circuits containing any combination of analog devices and digital functions, as well as high-level behavioral block. TopSpice allows you to verify and optimize the design of your system down to the transistor.

PathWave ADS provides integrated design guidance via templates to make it easier to get started. It is easy to find the part that you need with the extensive component libraries. Automatic sync allows you to visualize the physical layout and create schematic designs. Data allows teams to visualize whether their designs are meeting specifications. PathWave ADS's data display and analytics capabilities produce graphs, charts and diagrams that will give you design confidence. With wizards, templates, and design guides, you can quickly accelerate your design. The entire design flow includes schematic, layout and circuit. As frequency and speed increase on printed circuit boards (PCBs), signal and power integrity become more important. Electronic device failures can be caused by transmission line effects. To simulate the board accurately, it is necessary to model vias, traces, and interconnects.

Easy-wire mode allows you to connect elements with less clicks, and therefore less frustration. The unit-aware evaluation of expressions allows you to plot arbitrary signals, such as differential or power dissipation. You can design and analyze circuits faster with in-browser simulation. This allows you to test your circuit before you ever pick up a soldering tool. Advanced simulation capabilities include frequency domain (small signal simulation), stepping circuit parameters across a range, arbitrary Laplace function blocks, etc. With configurable plotting window, vertical and horizontal marker, and calculations for signals, you can work with multiple signals with ease. With just a few mouse clicks, you can create generic rectangular symbols to represent IC or system level wiring diagrams.

Electronic designs are becoming more complex, making them harder to detect errors. These errors can result in high costs and hundreds or hours of work. It is important to detect these errors early on in order to prevent damage. In many cases, these mistakes are only discovered during the testing phase or on the customer's premises. BQR CircuitHawk, a unique and powerful (patent-based) tool for electrical circuit stress analysis and design error detection is available. CircuitHawk detects errors in the design phase before layout and production. So, during the final verification, no errors in schematics, connectivity, or stress are detected. CircuitHawk reduces design cycles and the time to market. This saves money and improves corporate reputation. CircuitHawk integrates design error detection, thermal, MTBF, and service life predictions at the schematic level before PCB layout and manufacturing.

Since over 25 years, PSIM has been the leading simulation and design software in power electronics and motor drives. PSIM's intuitive, user-friendly GUI and robust simulation engine are the perfect solution for users to meet their simulation and design requirements. PSIM can perform quick power converter losses calculations, motor drive efficiency calculation, conducted EMI analysis and analog/digital controls. PSIM offers automatic embedded code for rapid control prototyping. With PSIM's Design Suites, users are able to design power supplies, electromagnetic (EMI) filters and motor drive systems quickly.

Ansys Exalto, a post-LVS RLCk extractor software solution, allows IC designers to capture unknown crosstalk between different blocks in their design hierarchy. It extracts lumped-element parasitics from the design hierarchy and generates an accurate model for electrical and magnetic coupling. Exalto interfaces well with most LVS tools, and can be used in conjunction with the RC extraction tool you choose. Ansys Exalto post LVS RLCk extraction allows IC designers to accurately predict electromagnetic and substrate-coupling effects for signoff on circuits previously "too large to analyze." The extracted models can be back-annotated to any schematic or netlist and support all circuit simulators. Modern silicon systems have seen a rise in RF and high speed circuits. This has made electromagnetic coupling a first-order effect that must be accurately modelled to ensure silicon success.

The Electromagnetic simulation (EM) gives you insight before physical prototyping. You can customize EM simulations to increase speed and accuracy. Integrate EM analysis into your circuit simulations. EM simulations can take several hours to run. Integrating your EM simulation software and PathWave circuit design software can reduce import and export times. To maximize efficiency, integrate EM analysis and circuit simulations. 3D EM solid modeling environment to create arbitrary 3D objects or import existing 3D models from other CAD settings. Prerequisite to prepare a 3D geometry for 3DEM simulation. This includes defining ports, boundary conditions, and material properties. 3D EM solid modeling and Finite Difference Time Domain simulator. Compliance testing for Specific Absorption Rates (SAR) or Hearing Aid Compatibility.

It is based upon a complete representation for the qubit state, but avoids the explicit representation in terms of matrices of gates and other quantum operation. Intel-QS uses the MPI (message-passing-interface) protocol to handle communication between the distributed resources used to store and manipulate quantum states. Intel-QS is built as a library that, when linked to an application program, allows the user to benefit from the high-performance implementations of circuit simulations. The library can run on a wide range of systems, including laptops and HPC server systems.

The graphical interface of the schematic capture tool allows you to explore schematics, produce simulation results and further explore them through the waveform viewer. The speed at which you can grasp the circuit, its correctness and its limitations is crucial to circuit design. LTspice is faster than many other simulation tools, and allows you to iterate designs in a short time. The keyboard shortcuts in LTspice are a quick and easy way to access commands that you would normally only be able to access by clicking on the menu or toolbar. Our vast collection of technical resources covers a wide range LTspice-related topics. Learn how to add third-party model, work with symbols and more.

Pharos combines Ansys’ unparalleled EM engine power with a proprietary circuit simulation engine to perform coupling analysis. It also provides a ranking of potential EM-crosstalk aggressors per victim. Designers can identify the most vulnerable nets to help them make design decisions that will manage EM crosstalk and reduce risk. Pharos combines an unparalleled extraction engine power with a built in simulation engine to perform EM analysis. It also ranks potential EM crosstalk aggressors per victim network. This allows designers to concentrate on the most important nets in the design. It is difficult, if not impossible to identify all EM crosstalk vulnerable victim/aggressor net pair due to increasing design complexity and the wide range of magnetic field interference.

There are many circuit simulators on the market. Just look at their ads: industry standard, high performance, fast, and extremely fast. SPICE), easy-to-use, highly intuitive. Try it out yourself to see if the tool is worth your time. Many NL5 users have already done this. I hope they'll share their inspiring stories soon. What can you expect from NL5? It is neither a replacement for SPICE nor a new SPICE. NL5 is superior for some tasks, good for others, and not suitable for some.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

EAGLE (electronic design automation) software allows printed circuit board (PCB), designers to seamlessly connect schematic diagrams and component placement. It also includes comprehensive library content. EAGLE offers a variety of PCB layout tools that will help you bring your design to life. Drag and drop reusable blocks between your projects. To ensure your schematic stays on track, validate your design using a complete set electronic rule checks. All changes are automatically synchronized between your layout and schematic, so you can concentrate on the creative process. You can control your design flow and avoid any unexpected surprises by using fully customizable PCB design rules. You can rest assured that your next design will be completed with worry-free libraries. Our growing catalog allows you to find and place parts dynamically.

It is a full-featured, accurate design environment that combines speed and accuracy. It can simulate power supply designs 10-50x faster than SPICE. SIMetrix Classic has all the features and uses the same GUI, including its hierarchical diagram editor and waveform view. Locates the steady-state operating point of a switch system without having the transient startup conditions simulated. Conversion of SPICE transistors and diodes to SIMPLIS format. Converts SPICE by running a SPICE Simulation to extract parameters. The advanced digital library includes a variety of digital functions, such as counters ADCs DACs.

Fusion 360 brings together design, engineering, electronics and manufacturing in one software platform. Get integrated CAD, CAM, CAE & PCB on a single development platform. EAGLE Premium, HSMWorks and Team Participant are also included. You also have access to consumptive services such as cloud simulation, generative design, and cloud rendering. A comprehensive range of modeling tools is available to help you design products. You can ensure the form, fit and function of your products using a variety of analysis methods. You can create and edit sketches using sketch constraints, dimensions, as well as a powerful suite if sketch tools. Edit and repair imported geometry from non native file formats. You can make design changes without worrying too much about time-based features. Edit complex parametric surfaces to repair, patch or design geometry. You can create history-based features such as extrude, revolve and loft that are updated with design changes.

Today's companies are faced with complex design challenges as well as tight budgets. eCADSTAR is much more than a PCB layout software. It includes simulation, 3D MCAD integration and wire harness support. All built on the most recent technology to provide enterprise-level performance at a reasonable cost. eCADSTAR's intuitive UI makes it a compelling choice for designers. eCADSTAR's design capabilities can be leveraged to simplify and accelerate your design process. The digitally connected library, intuitive schematic capture and tools to accelerate PCB Layout Engineering allow engineers to spend less time manipulating the tool, and more time doing what they love: innovating creative solutions for today’s technological challenges. The test plan is one of the most tedious parts of the design process. Without adequate upfront simulation, validation can be expensive in both time and money. eCADSTAR's capabilities for Spice simulation and SI/PI analysis deliver test cycle time reductions.

Simulink allows you to simulate your system before you move on to hardware. You can explore and implement designs you wouldn't normally consider without having to code C, C++, or HDL code. You can explore a wide range of design options by modeling the system under testing and the physical plant. To simulate the behavior of all components of the system, your entire team can use a multi-domain environment. Your simulations can be packaged and shared with clients, suppliers, or collaborators. You can reduce the cost of prototypes by testing your system in conditions that are too risky or too time-consuming. Rapid prototyping and hardware-in-the loop testing can validate your design. You can trace your design from requirements to code. Instead of writing thousands upon lines of code manually, generate high-quality C or HDL code automatically. This code behaves in the same way that Simulink's model. You can then deploy it directly to your embedded processor or FPGA/ASIC.

The schematic editor allows you to create unlimited designs. There are no paywalls for unlocking features. A built-in schematic editor and an official library of schematic symbols will help you quickly get started with your designs. Professional PCB layouts can be made with up to 32 copper layers. KiCad now includes a push-and-pull router that can route differential pairs and adjust trace lengths interactively. KiCad also includes a 3D viewer that you can use to view your design in an interactive canvas. To inspect details that are difficult or impossible to see in a 2D view, you can rotate and pan around. Multiple rendering options make it possible to change the board's aesthetic or hide and show certain features. The schematic capture in KiCad is fast and efficient. It also includes all the tools necessary to do so. The interface is focused on productivity. As large designs can be broken into hierarchical subsheets, there are no limits to their complexity.

Proteus was developed back in the days MS-DOS. After 30 years of continuous development, we are proud to present one of the most efficient and cost-effective PCB tools available. Our philosophy has been to continuously improve and innovate. This resulted in a modern software suite that is packed with powerful, time-saving features that will help you design PCBs more quickly. Proteus purchase is just the beginning of a long-lasting business relationship. A world-class technical support service is included in the price of the software. Each professional purchase will be assigned a member of our team as your technical support contact. This allows you to easily ask questions and get direct access to Labcenter support. Although we may not be able solve all your problems immediately, we will do our best. Our success is due to our customers.

Real-time collaboration, a simple simulator and forkable community content make it easier to build hardware more efficiently. Modern sharing, permissions and an easy-to use version control system allow you to harness collective intelligence. We believe in open-source. Flux's ever-growing library of schematics and parts makes it easy to get started quickly. Finally, a programmable simulation that doesn't require a PHD. You can view your schematic online before you start building. Flux is the place to go for great hardware projects, no matter if you're designing hardware for the next Mars mission or a simple circuit board. Flux is a browser-based, end-to-end electronic design platform that breaks down all barriers. Flux is doing something new and we're doing it in a unique way. It's called building openly. Join our community of makers, engineers, and entrepreneurs who are passionately interested in improving hardware design tools.

TinyCAD, an open-source program that draws circuit diagrams, runs under Windows. TinyCAD is free and will always be free. TinyCAD is not sold by licensed sellers. It is simple to create libraries of circuit symbols with TinyCAD, but it can be time-consuming. If you have symbols that you think might be useful to other TinyCAD users, why not upload them to this site so they can be downloaded by others? The TinyCAD manual can be downloaded with the installer, but it can also be accessed online as part of the TinyCAD Wiki. If you feel that this manual could be improved, please edit the Wiki to benefit others. You can find tutorials on Github on how to edit Wikis.

TINA, the most advanced web-based ERP system for the travel industry, is designed to optimize office management and systems with an eye towards increasing efficiency and productivity. TINA Travel IntraNet Application (Enterprise Resource Planning), is a web-based ERP system that helps travel professionals manage their workflow. TINA manages all bookings, supplier and client invoices, payments, and settlements. TINA integrates bookings made within 3rd party applications such as GDS, hotel wholesalers and Airlines. Through its 3rd-party XML import feature. This allows you to process paperwork and orders in the most efficient way for you and your agency. TINA provides tools for office management such as automated customer profiles, task management and sales force management module. It also includes automated alerts and credit limit management. TINA also has user traces that allow you to identify patterns in the daily workflow.

The AFS Platform is foundry-certified and delivers SPICE accuracy of nm, 5x faster than traditional simulations, and >2x faster compared to parallel SPICE simulators. The fastest nm platform for circuit verification of analog, RF and mixed-signal circuits. Now includes the new eXTreme Technology. AFS eXTreme is 3x faster and has a 100M element capacity for large post-layout circuits. Supports all leading solvers. Best-in class usability allowing maximum reuse and reuse of verification infrastructure. Verification coverage is improved by advanced verification and debugging capabilities. Improved design quality and reduced time to market. SPICE high-sigma accuracy. 1000x faster than brute force simulation Easy to use and deploy. AFS eXTreme is available for no additional charge.

Ansys Maxwell solves EM fields for electric machines, transformers and wireless charging. It also works with actuators, permanent magnet latches and other electrmechanical devices. It can solve static, frequency-domain, and time-varying electric fields. Maxwell also offers specialized interfaces for power converters and electric machines. Maxwell allows you to precisely characterize the transient, nonlinear motion of electromechanical components as well as their effects on the drive circuit design and control system design. Maxwell's electromagnetic field solvers can be seamlessly linked to the integrated circuit or systems simulation technology to enable you to understand the performance of electromechanical system before you build a prototype in hardware. Maxwell provides a reliable simulation of low-frequency electromagnetic field in industrial components.

Ansys Icepak solves thermal management problems using CFD. It predicts airflow, temperature, and heat transfer in IC packages, PCBs, electronic assemblies/enclosures, and power electronics. Ansys Icepak offers powerful electronic cooling solutions using the industry-leading Ansys Fluent CFD solver to perform thermal and fluid flow analysis of integrated circuits, packages, printed circuit board (PCBs), electronic assemblies and enclosures. Ansys' Icepak CFD solution uses the Ansys Electronics Desktop GUI (GUI). Perform heat transfer analysis conjugated with conduction, convection and radiation. Advanced capabilities include laminar and turbulent flow modeling, species analysis, including radiation and convection. Ansys PCB Design Solution allows you to simulate PCBs and ICs and accurately evaluate a system.

With powerful optimization tools and fast simulation, analyze RF and microwave systems. Automatic circuit synthesis technology allows you to explore performance trade-offs. PathWaveRF Synthesis (Genesys), provides basic functionality that is suitable for all RF and microwave circuit board and subsystem designers. PathWave Circuit Design allows you to identify RF design mistakes that are not obvious from spreadsheet calculations. This entry-level environment includes circuit, system and electromagnetic simulators. It will give you confidence in your design reviews prior to hardware realization. You can see your matching network being synthesized and optimized in just a few mouse clicks. Transfer the design to PathWave Advanced Designer System (ADS), and it will be included in a more complicated design.

Eaton's easySoft software can be used to program easy controllers or displays. The software allows for circuit diagram input and editing, and can display the diagrams in the format desired. A built-in offline simulation tool allows users the ability to test a circuit before it is put into service. It is used by users who are programming, configuring, and defining parameters. It also creates visualization functions for MFD displays. Existing programs created with the previous series (easy500/700/800), can be easily transferred to the easyE4 PCL with automatic conversions of visualizations using easySoft 7. Eaton's goal to improve your product knowledge, troubleshooting skills and safe operation of machinery control products is to help you. Eaton offers a variety of self-guided, instructor-led, and eLearning training options to suit your individual needs.

The award-winning mPower software provides power integrity analyses for digital, 3D, and analog ICs across all design flows, at any scale. Analog, semicustom, and digital integrity analysis can easily be integrated into existing design flow while scaling to circuits or chips of any size. The mPower suite of tools performs fast, scalable and efficient analog and digital integrity analysis, from the smallest blocks up to the largest full chip layouts, to verify design goals and performance. It provides high-confidence tape outs for all technologies and designs. The mPower Analog Power Integrity Analysis solution provides simulation-based high-capacity dynamic analysis to ensure power integrity of analog designs at any scale. The mPower tool uses industry-standard inputs, optimized memory requirements and a scalable architecture to increase scalability of digital power integrity analyses and decrease runtimes.

CircuitMaker is more than an Altium EDA software tool. It's a community of creative people, sharing design content, and working together to create circuits and electronic products for a better tomorrow. You need tools that don't limit your creativity or hold you back from turning great ideas into products. CircuitMaker gives you all the power to create high-quality schematics and Printed Circuit Boards. There are no artificial limitations on board area or layer count. It's also free. CircuitMaker is a place where you can find great reference designs and promote and rate other projects. You can even create teams to collaborate on design projects. We believe you deserve better tools to help you turn your great ideas into reality. CircuitMaker was born. CircuitMaker is not only a community for electronic design content but also Schematic and PCB design software.

Multipurpose, full-wave 3D electromagnetic (EM), simulation software for designing, simulating and optimizing high-frequency electronic products, such as antennas, components and interconnects. Ansys HFSS 3D electromagnetic (EM), simulation software is used to design and simulate high-frequency electronic products, such as antennas and antenna arrays, RF and microwave components, high speed interconnects and filters, connectors and IC packages. Ansys HFSS software is used by engineers around the world to design high-frequency, fast electronics for communication systems, advanced driver assistance system (ADAS), satellites, IoT products, and other areas. Engineers can address complex EMI, RF, microwave, IC and PCB problems with HFSS's unmatched capability. Ansys HFSS simulation suite includes a wide range of solvers that can be used to solve diverse electromagnetic problems.

You can design, share, and manufacture all from one place without having to install or configure anything. Altium Designer allows you to connect directly to the platform without having to change the way that you design electronics. Altium 365 doesn't require additional licenses and is included in your subscription. Transparency in reviews and design sharing will help you bring better-quality products to market quicker than your competitors. You can share, in real-time and without leaving your design space, the status and progress of your projects with your team members, manufacturers, clients, and anyone else who can review and comment. Anybody with Internet access can view, compare, contrast, and comment on your projects without the need for additional Altium Designer licenses. You can make electronic and mechanical collaboration challenges a competitive advantage by working seamlessly between domains without losing sight or time.

You can go beyond math-based modeling by using a complete RF-aware design process. This workflow includes decades of Keysight measurement science in RF instruments, which is available for all system architects. PathWave System Design is the best platform for prototyping complex RF systems. It offers faster simulation speeds, near-circuit fidelity and libraries for radar, electronic warfare satellite, 5G and WiFi. Plus, it integrates with many partners. Your system designs can only be improved by statistical models for propagation or channels. With the help of tools like STK by AGI, Ansys Company, dynamic kinematic modeling is possible for electronic warfare, radar, satellite, 5G and automotive. Trusted reference libraries based on Keysight measurement science are essential for advanced cellular system designers. Researchers working on the next generation communications signals require a flexible platform to develop and test physical layers.

The Quantum Exact Simulation Toolkit is a high performance simulator of quantum circuits. It also simulates state-vectors, density matrices and density vectors. QuEST uses multithreading and GPU acceleration to run lightning-fast on laptops, desktops, and networked supercomputers. QuEST is a stand-alone program that requires no installation and is easy to compile. QuEST does not require any setup. It can be downloaded, compiled, and run within seconds. QuEST is free of external dependencies, and it compiles natively under Windows, Linux, and MacOS. You can get QuEST to run on almost any device, whether it's a laptop, desktop, supercomputer, microcontroller or cloud.

AllSpice accelerates your time to market. It allows modern revision control and collaboration for native digital designs. Transform those three-hour-long, in person, and difficult-to-schedule meetings to digital, asynchronous review sessions. Run your design reviews like a pull request. Automate your review packages. Automate your review packages by creating PCB, schematic, or BOM redlines that highlight your design changes. It's like a software diff but for circuits and not code. Never make the same mistake twice. To remind you and your team what to do next, create checklists and templates that automatically populate for new design reviews. Better design reviews are key to agile hardware development. You can submit design updates and get feedback by sharing them with others. Give people outside of your team, such as mechanical or firmware engineers, a browser view of your designs.

RobotStudio, the world's leading offline simulation and programming tool for robotic applications, is available in many languages. RobotStudio is based on the best virtual controller technology. This gives you the confidence that the robot you see on screen will actually move. This unique technology allows you to build, test and refine your robot installation within a virtual environment. It speeds up commissioning and productivity by a large amount. RobotStudio Desktop allows you to program and simulate without disrupting ongoing production. RobotStudio Cloud allows individuals and teams to work together in real-time, from anywhere on any device, on robot cell designs. The RobotStudio Augmented Reality Viewer allows you to view robots and solutions within a real-world environment or a virtual room using any mobile device. The desktop and mobile apps allow teams to collaborate more effectively and make quicker decisions.

E-Coord is a great tool for analyzing time-current curves of overcurrent protection devices. You can select the devices that you want from the list to get started. E-Coord allows you to add or modify the data. You can download the functional demo version to see why E-Coord has been chosen by many professional engineers. The Elite Software E-Coord Program allows for the selective coordination and use of circuit breakers and fuses by providing an instantaneous review on their time-current curves within a proposed electrical protection system. E-Coord can reveal curve overlaps and also analyze the melting and clearing I2T values of each fuse to determine if there are any time-current overlaps that cannot be seen on a plot. E-Coord comes with a library that includes over 2,000 protection devices from many manufacturers.

Store content in your repository. Tina can save to MDX, Markdown and JSON, and adds a powerful data layer over your static files. Tina will give you a user-friendly experience when you define your content's schema. Tina will commit your repository while your editorial team focuses on writing content. Query your Markdown like you would a headless CMS. Tina's GraphQL Data Layer allows for filtering, sorting and pagination. Tina allows you to create reusable components. Let your team assemble pages like a site builder. The site management is harmonious when both developers and editors work together on a single source. Tina's intuitive editor for the sidebar allows you to get instant feedback. Allow your editors to preview changes before they are published.

Online PCB design software that is professional-grade and offers free technical support. PCB artist features include multi-page schematics, Netlist import, and more. Advanced circuits' online PCB software is easy to use and is the best free PCB layout software. Our PCB design software is a big reason why our customers love doing business with Advanced Circuits. We help you design printed circuit boards correctly, which will save you time and money.

You can either choose an existing power solution, or you can create a new design. You will also find schematics and component lists. You can view or modify your selection and export the design files to MPLAB® Mindi™, Analog Simulator, for analysis and verification. Need help calculating your signal-chain noise budget? The signal chain signal to noise calculator tool allows you to perform a complete analysis of your signal chains. It is intuitive, flexible, and easy to use. The interface is simple and requires very little data inputs. Integrated design generators are used to create new power designs and refine existing designs. It is easy to switch from selecting the power solution to verifying the design. No software download is required to use the online signal chain signal-to noise calculator.

Our CAD Viewer 2021 standalone application is capable of viewing all AutoCAD drawings and MicroStation drawings. Remote desktop access software such TeamViewer can be used to operate CAD Viewer in a telecommuting environment. We also offer CAD Markup 2021 which includes measurement and markup features. It is easy to view and print all AutoCAD®, DWG/DXF/DWF format, including AutoCAD 2022. View Adobe®, MicroStation®, DGN, Inventor and other CAD formats. A perpetual license is available for a one-time fee. You will receive fast technical support that is not available with any other viewer software. Download and use the software without registration. Easy download and installation. Instantly load and print CAD drawing. Convert and publish CAD drawings as PDFs or JPEGs. Easy network installation and network licenses for multiple users. CAD Viewer features include save as PDF, convert DWG, DXF, DGN, PDF, and DXF to pdf. You can also output individual drawings.