Alternatives to SafeGrid Earthing

DesignCalc software offers a wide range of capabilities to users, as well as an embedded library industry data and proven methodologies that make ASME BPVC Section VII pressure vessel design compliance much easier than ever! Finite Element Analysis software (FEA), for quick and simple analysis. NozzlePRO is a powerful, fast 3-D FEA tool that models nozzles and saddles as well as pipe shoes and clips. Calculations that account for thickness or pressure can optimize your design. You can use the thinnest material available and still meet the code. Prepare industry-accepted reports that include the calculations used and are ready for inspection.

Ansys MotorCAD is a dedicated tool for electric machine design. It allows you to quickly simulate multiphysics across the entire torque-speed operating range. Motor-CAD allows engineers to evaluate motor topologies across the entire operating range. This allows them to create designs that are optimized for size, efficiency, and performance. Motor-CAD software's four modules, Emag, Therm Lab, Mech, allow multiphysics calculations to be performed quickly, iteratively, and users can move from concept to final design in a shorter time. Motor-CAD users can explore more motor topologies and fully evaluate the impact of advanced loss effects during the initial stages of an electrical mechanical design with Motor-CAD's streamlined data input process. This release features powerful new features for design optimization and multi-physics analysis, as well as system modeling for electric motors. Multiphysics simulations are fast across the entire torque-speed range.

PLAXIS 2D LE and PLAXIS 3DLE allow you to model and analyze geoengineering projects that are limited equilibrium. These powerful software applications allow for rapid and comprehensive analysis of various conditions. You can create 2D and 3-D limit equilibrium slope stability models for soil and rock slopes. The comprehensive search tools and more than 15 analysis options allow you to take advantage of the extensive set of search methods. Multiplane analysis (MPA) is a method that enhances spatial slope stability analysis. Analyze embankments, dams and reservoirs as well as cover systems using earth structures and other hydrogeological settings.

Every project is difficult, but the geotechnical analysis does not have to be. PLAXIS 2D offers fast computations. Advanced finite element and limit equilibrium analysis of rock and soil deformation and stability. Also, soil structure interaction, groundwater and heat flow. PLAXIS 2D, a powerful and easy-to-use finite-element software for 2D analysis and stability in geotechnical and rock mechanics, is available. PLAXIS is used by the top engineering firms and institutions in civil and geotechnical engineering. PLAXIS 2D can be used for many applications, including excavations, foundations, embankments, and foundations, as well as tunneling, mining and oil and gas extraction. PLAXIS 2D provides all the necessary tools to perform safety analysis and deformation of soil and rock. It does not need to take into account creep, steady-state groundwater, thermal flow, consolidation analysis or any other time-dependent effects.

GT STRUDL®, a structural engineering software, offers a complete solution. It includes 3D CAD modeling and 64 bit high-performance computation solvers in all versions. GT STRUDL has all the tools needed to analyze a wide range of structural engineering and finite elements analysis problems. It can do this accurately in a fraction the time it takes to use other structural design software. Structural design software is used by structural engineers to create safe and effective designs. It also helps them manage the complexity of many scenarios across a variety of industries, such as power, civil engineering and marine. GT STRUDL includes many quality features such as interoperability and structural analysis, database-driven designing, and quality assurance.

CONSELF allows you to use Computational Fluid Dynamics and Finite Element Analysis (FEA), which can be used to improve the design of your product: minimize drag and fluid dynamics losses; maximize heat exchange performances; estimate pressure loads; verify material resistance; evaluate components shape deformation; calculate natural frequencies, modes and other modes. Structural Mechanics can be performed dynamically or statically, using both elastic and non-elastic materials. You can also perform frequency and modal analyses starting from the most common CAD neutral file formats.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

nCode DesignLife is an online design tool that identifies key locations and calculates realistic fatigue life from leading finite element results for metals and composites. Designers can do more than simple stress analysis. They can simulate actual loading conditions and avoid costly design changes. Products can include functions for fatigue of welds and vibration fatigue, crack growth detection, fatigue in composites, and thermo-mechanical fatigue analysis. Advanced technology for multiaxial, vibration, crack growth and thermo-mechanical fatigue. A graphical interface that makes it easy to perform fatigue analysis using the most popular FEA results data such as ANSYS, Nastran and Altair OptiStruct. Multi-threaded and distributed processing capabilities to process large finite element models as well as complete usage schedules.

Revit electrical design software. AutoCAD offers electrical and HVAC design software. Revit models can be used to create electrical designs. Create a one-line riser diagram and size feeders. Calculate voltage drop correctly! You can also perform short-circuit analysis. Complete electrical design program in familiar AutoCAD environment. Integrate your calculations with drafting. Create panel schedules, one-line diagrams, fault and voltage drops, and much more. In the familiar AutoCAD environment, you can create a complete HVAC design program. You can easily design, size, and draft your HVAC ductwork.

Your designs can be tested under real-world conditions to improve product quality and reduce prototyping and testing costs. SOLIDWORKS®, Simulation is a simple-to-use suite of structural analysis tools that uses Finite Element Analysis to predict a product’s real-world physical behavior. This can be done by virtually testing CAD models. The portfolio offers dynamic, static, and linear analysis capabilities. SOLIDWORKS Simulation Professional allows you to optimize your design, determine product mechanical resist, product durability, and test heat transfer instabilities and buckling instabilities. It can also perform multi-physics sequential simulations. SOLIDWORKS Simulator Premium allows you to efficiently evaluate your designs for dynamic response, nonlinear, and composite materials. SOLIDWORKS Simulation Premium offers three advanced studies: Nonlinear Dynamic, Linear Dynamics, and Non-Linear Static.

SPACE GASS is a 3D analysis and design program that can be used for multiple purposes. It is able to design beams, trusses, frames, buildings, towers and tanks, as well as cable structures and bridges. Capabilities include a 64-bit multi-core solver, silky smooth 3D rendered graphics, plate finite elements, frame elements, cable elements, tension/compression-only elements, moving loads and links to many CAD and building management programs. Why SPACE GASS? You can save time and money by choosing a safe and effective design. A silky smooth interface allows you to see your changes visually. A fast sparse matrix solver which fully exploits multi-core processors' parallel processing power. There are many structural modeling tools, analysis options, and design modules. Video tutorials that will guide you through the difficult stuff. For use in floating or stand-alone networks.

Cable Pro Web, a cloud-based calculation tool for low voltage electrical design, is well-known and compliant with many international standards. This software is compatible with all types of electrical installations, including commercial and industrial. Cable Pro Web allows users the ability to calculate cable sizing, voltage drop, maximum demand, voltage increase for solar, discrimination, protective devices, power factor correction and cable pulling tensions. It also allows them to calculate electrical networks with generators, transformers and switchboards. Cable Pro Web assists electrical businesses in securing more work and larger projects. It allows users to accurately quote and is therefore more likely to succeed on their projects. Cable Pro Web is easy to use and saves time. It is also quick and simple to learn. There is also excellent technical support.

Simulating and analyzing your product design will reduce the cost of physical prototyping and increase your products' durability and reliability. It is crucial to your product development to use digital prototypes to understand the performance of your designs in real-world situations. Creo Simulation was designed exclusively for engineers. It includes structural, thermal and vibration analysis solutions, as well as a comprehensive set finite element analysis (FEA). You can validate and analyze the performance of 3D virtual prototypes with Creo Simulation before you even make the first part. We offer unique and flexible simulation solutions to our customers. This section will give you a better understanding of what we can do to meet your needs. Contact a Creo representative if you have any questions regarding our tool stack.

CalculiX allows you to build, calculate and post-process Finite Element Models. The interactive 3D tool for the pre- and after-processor uses the openGL API. The solver can perform linear and nonlinear calculations. There are solutions for static, dynamic and thermal problems. Both programs can run independently. The solver uses the abaqus format for input, so it is possible to use pre-processors from commercial companies. The pre-processor can write mesh data for nastran abaqus ansys code-aster as well as the free-cfd-codes dolfyn duns ISAAC OpenFOAM. Included is a simple step reader. External CAD interfaces can also be used. The program can run on Unix platforms such as Linux and Irix but also on MS Windows.

These values are used to confirm the intent of the design and provide information that supports the design. They also confirm a balanced, protected power distribution system, including short circuit current, system grounded arrangement, voltage hierarchy, and connection to the grid. PowerCalc is a new tool that allows you to design the power distribution system for a building. It is a powerful tool that generates database-driven results, resulting in fewer design hours, errors, and process hiccups. PowerCalc uses its fully-populated proprietary database to select the appropriate values for compliance with the NEC, other applicable codes, and engineering standards. This database also includes the NEC lookup tables. More information on inputs and outputs

RS2 allows you to easily analyze stress/deformation and stability of any project, regardless of whether it is above ground or below ground. RS2's integrated Seepage Analysis Tool allows you to factor in groundwater flow for both steady-state and transient conditions. Automate your slope stability analysis using shear strength reduction. This performs a finite element analyze to determine the critical strength reduction factor. You can analyze embankments using slope stability, groundwater leakage, consolidation, or dynamic analysis. Groundwater and dynamic analysis tools are available in RS2. There is also a large library of advanced constitutive models that can be used to capture the sudden loss in strength caused by liquefaction. This tool is suitable for both underground and open-pit excavations. It can analyze stability, stress/deformation and bench design. It also supports the design and support of underground caverns.

MODECSOFT is a software company that specializes in creating high-quality, easy-to-use software tools. We specialize in developing software tools that meet the needs of the building sector and creating custom applications for businesses. Modecsoft ElectricalOM, a powerful, fast and accurate software for low-voltage electrical design, modeling, certification is available. Calculations and checks compliance with BS 7671 - 2018 - Harmonized with IEC 6364. Our software is compliant with BS7671.2018 - 18th edition. ElectricalOM will continue to support 17th Edition. The Autodesk Revit r - ElectricalOM synchronization tool allows Electrical Engineers and Designers to synchronize Revit Electrical Data with ElectricalOM. This allows BS7671 Calculations in the Autodesk Revit Building Information Models and Auto-Create Schematic Diagrams.

Ansys RaptorH electromagnetic modeling software can model power grids, full custom blocs, spiral inductors and clock trees. High-speed distributed processing allows for accurate, silicon-proven RLCk and S-parameter models. RaptorH is capable of analysing partial and unfinished layouts in the design phase. It makes it easy to use either RaptorX, the silicon-optimized RaptorX engines for silicon structures, or the general purpose HFSS engine. Ansys RaptorH extracts electromagnetic model at the pre-LVS stage to allow for arbitrary routing and layout. This includes planes (solid and perforated), spiral inductors and MiM/MoM capacitators - with automatic setting boundary conditions. The GUI allows for point-and-click net selection as well as what-if analyses. RaptorH can be used to create analyses using either the HFSS engine or the Raptor engine. It is supported by all major silicon findries.

Software for finite element analysis using CAD-embedded software. You can use a wider range of study types and materials to aid your analysis. Inventor®, Nastran®, provides finite element analysis tools for engineers and analysts. Simulation includes many types of analysis, including dynamics, heat transfer, linear and nonlinear stress and dynamics. Inventor Nastran can only be found in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection includes advanced simulation, 5-axis CAM and nesting tools, as well as AutoCAD and Fusion 360.

Ansys RedHawk SC is the industry's most trusted standard for voltage drop and electromigration multiphysics sign off solutions for digital designs. Its powerful analytics quickly detect weaknesses and allow for what-if explorations to optimize power efficiency and performance. Redhawk-SC's cloud-based architecture allows it to perform full-chip analysis. All major foundries have certified signoff accuracy for all finFET Nodes down to 3nm. Ansys RedHawk SC enables robust digital designs that are low-power and perform well. This is possible thanks to advanced power analytics which give designers detailed techniques to detect and correct dynamic voltage drops. Ansys RedHawk SC's trusted multiphysics signingoff analysis is a powerful tool to reduce technology and project risk. RedHawk's algorithms have been proven to be accurate by all major finFET process foundries and are certified by all major findries.

Geotechnical Engineering Modelling Software is a CAD software that allows foundation design and analysis to be performed intuitively. GEMS foundation analysis suite uses finite element modeling techniques to analyze and design shallow and deep foundations. The foundation analysis suite contains modules for analysing pile foundations, beam foundations, and a module that can analyze offshore pile foundations. GEMS foundation analysis suite is available for free on the cloud. You can also download it for free and purchase it for PC & Mac.

SolidFEA, our innovative solid finite-element analysis tool, is designed to make advanced structural design affordable and accessible. It is powered by the Calculix engine and offers detailed sub-model analyses at a lower cost and with less hardware than competitors such as Abaqus. SolidFEA is ideal for complex engineering challenges such as steel connections and bridge design. Its ease of use, IFC file compatibility and ease of use make it a great complement to our GenFEA structural analysis software. SolidFEA is a revolutionary step in structural engineering, bridging a gap that existed for ages due to prohibitive costs, complicated learning curves and high-end computing demands associated with solid finite elements analysis (FEA). It is designed for ease of use and supports IFC file formats, making it an easy addition to engineering workflows.

AxisVM's primary uses are in the design and construction of buildings and industrial and geotechnical structures. It is a powerful finite element solver, as well as practical modeling tools. This allows it to be used in bridge design and the design of composite structures, vehicles, and machines. There are optional design modules available for structures made from reinforced concrete, steel and timber, as well as masonry members and connections. AxisVM's special elements and analysis capabilities allow users to design innovative and custom structures. Reports can be created using drawings, tables, and detailed design calculations. Reports can be automatically updated, i.e. Reports are generated using the most recent model data and results.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

VSim is the Multiphysics Simulator Software that design engineers and researchers use to solve difficult problems. VSim's unique combination Finite-Difference Time Domain (FDTD), Particle in Cell (PIC) and Charged Fluid(Finite Volume), delivers accurate results in a variety situations, including plasma modelling. VSim is a parallel software program that can efficiently solve large scale problems. Simulations are run quickly using algorithms for high-performance computing systems. Trusted by researchers from 30 countries and used by engineers in a variety of industries, including aerospace and semiconductor manufacturing, VSim delivers results that are reliable. Tech-X's code was created by a group of computational scientists. VSim is available at many of the top research institutions around the world.

Thermal Desktop is a complete model creation tool. Objects such as finite element, lumped capacitance, and built-in finite differences can be combined in any way. Thermal-specific objects, such as insulation, heat loads and heaters, can be added to any model, from automotive components to manned satellites. Thermal Desktop allows full parameterization by using variables and arbitrarily complicated expressions instead of hardwired numbers. These variables, also known as symbols, enable models to be quickly manipulated by a few keystrokes. This makes it easy to update or maintain the model, perform sensitivity studies, and investigate what-if scenarios. This gives you access to SINDA/FLUINT’s optimization and reliability modules, as well as automatic model correlation.

Simcenter Femap is an advanced simulation program that allows you to create, edit, and inspect finite element models of complex products and systems. Simcenter Femap allows you to create complex models of components, assemblies, and systems. This allows you to determine the model's behavior when it is exposed to real-world conditions. Simcenter Femap, which is a powerful data-driven and graphically driven results visualization and evaluation, can be combined with Simcenter Nastran to provide a comprehensive CAE solution that enhances product performance.

With STAAD, you can design, analyze and document structural projects anywhere in the world. It provides a flexible solution that covers all aspects of structural engineering, starting from the foundation. STAAD is a comprehensive structural finite elements analysis and design program that allows users to analyze any structure that is exposed to dynamic, wind, earthquakes, thermal, and other moving loads. STAAD is available in a variety of versions so you can choose the one that suits you best. STAAD is a popular application for structural analysis. It is well-known for its flexibility, interoperability, time-saving abilities, and analysis. STAAD is a 3D structural analysis tool that allows structural engineers to design steel and concrete structures. An analysis model can be created from a physical model created with the structural design software. STAAD incorporates many design code standards.

You can easily create complex concrete geometry, including single-level, ramps, or multi-story structures, using robust modeling tools and import from CAD/BIM software. Utilizing true 3D finite element analysis, load takedown and slab alignment, you can efficiently analyze slabs and entire structures for the combined effects gravity, lateral, or vibration loading. ADAPT-Builder lets you control all aspects of the design, including cracking, long term deflections and punching shear. This allows you to accurately and comprehensively examine an existing reinforced concrete slab. Whatever your concrete design requirements are, ADAPT software can help. Compare packages to get started. ADAPT Builder is the 3D modeling platform, analysis and design platform for ADAPTFloor Pro, Edge and MAT. Modeler can also be used in conjunction with ADAPTPT-PT or RC.

Patran offers a set of powerful tools to help you create analysis-ready models for linear, nonlinear and explicit dynamics solutions, thermal solutions, and more. Patran's tools make it simple for anyone to create FE-models. From geometry cleanup tools to help engineers deal with gaps and slivers, to solid modeling tools to allow creation of models completely from scratch, Patran is easy to use. Surfaces and solids can be meshed using fully automated routines, manual methods for more control, or a combination of both. Finaly, loads, boundary condition, and analysis setup are built-in for most popular FE Solvers, reducing the need to edit inputs. Patran's comprehensive, industry-tested capabilities ensure that virtual prototyping efforts deliver results quickly so that you can evaluate performance of products against requirements and optimize designs.

It is intended for architects of electrical and power equipment systems in buildings. It can also be used to document the professional documentation of low-voltage electrical systems. This module expands the capabilities and features of ArCADia's BIM program with advanced functions. It means that a portion of the building modeling options are available in ArCADia's BIM program

VisualAnalysis is used by thousands of professionals to meet deadlines. Customers describe it as "a great value" with "so much ease of use". You need tools that are easy to use and affordable. 3D models of buildings, tanks, towers etc. Static and dynamic response analyses. Design code checks for wood, concrete, steel, cold-formed steel and aluminum. Includes complete analysis and design features, including automatic plate meshing and nonlinear elements. 3D static and Dynamic FEA for civil engineering, mechanical, aerospace, or any other structural analysis. Support for building code load combinations is optional.

Flexible and powerful preprocessor for high-quality finite element meshes. Attractive price - up to a factor of ten lower than their foreign counterparts. Calculation of strength under dynamic and static loading. Calculation of vibration modes and natural frequencies. Calculation of critical loads, buckling modes and critical loads. Calculations in 2D and 3D for volumetric, thin-walled, and bar structures. Elastoplastic deformation according the mises and Drucker-prager models. Calculation of strength for large displacements. Calculation of temperature, heat loss, and temperature deformations of parts or structures. Calculation of strength for highly elastic materials.

Cableizer is an electrical, mechanical and thermal cable design software package. Cableizer is a web-based application: it is inexpensive, widely available and customizable. It also has better interoperability and is easier to maintain and install than a desktop program. Property • Software-based cable design up to 500kV! • Calculations of cable mass, heat of burning, CO2, price etc. Calculation of cable pull and rated current • Environmental calculations including magnetic field and increase in ground temperatures • Web-based, without installation or dongle but with automatic updates Share links directly with customers to collaborate

Hager, a leader in the provision of solutions and services for electrotechnical installation, is your partner for residential and commercial real estate. Our portfolio includes energy distribution, energy management, energy monitoring, cable routing, intelligent building control and security tech. Hager offers all the skills required to create future-proof products, services, and solutions for smart buildings. This includes quality, functionality, and design at the highest levels. The manufactory creates perfectly coordinated solutions, including individually configured cable ducts, unique switches and operating elements for door communication. The Hager Tips are a concise and easy-to-understand way to present complex topics, whether they are current standards or practical recommendations.

Ansys Mechanical is a top-of-the-line finite element solver that can be used to improve your modeling. It has structural, thermal, acoustics and transient capabilities. Ansys Mechanical allows you to solve complex structural engineering issues and make faster design decisions. The suite includes finite element analysis (FEA), which allows you to automate and customize solutions for structural mechanics problems. You can also parameterize these solvers to analyze multiple design scenarios. Ansys Mechanical offers a wide range of analysis tools and is a dynamic tool. Ansys Mechanical provides a dynamic environment that allows you to connect additional physics and prepare geometry for analysis. Engineers of all levels can access the intuitive and customizable interface to quickly and easily find answers. Ansys Mechanical provides an integrated platform that uses finite elements analysis (FEA), for structural analysis.

BQR’s CARE software is a one-stop-shop for all RAMS (Reliability Availability Maintainability and Safety) analyses. It is integrated with CAD tools. CARE is a comprehensive solution for reliability engineers. It is used primarily during product design and operation to improve robustness. The complexity of critical systems and the workload of reliability engineering are increasing. BQR's suite of CARE tools allows reliability engineers to organize technical data, perform RAMS analyses simultaneously, and produce reports easily. CARE and fiXtress include plug-in modules for popular CAD tools that automatically retrieve all design information applicable to RAMS analyses. Excel sheets and manual procedures are not as fast or organized as CARE. Improve your product design by gaining insight into RAMS. Save time for reliability engineers by complying with international standards.

Design Force is a revolutionary innovation in electrical design. It allows you to break down the boundaries of your electrical design process. The process of designing a product is becoming more complex. This often involves technologies that are difficult or impossible to use ECAD tools to address. Design Force allows design teams to access system-level design information as early as the planning and conceptual phases. This allows them to layout each product board while simultaneously considering the entire system view. Design Force uses the most current industry hardware and software. Users can design in a native 3D environment. This allows them to achieve optimal performance by using native 64-bit, multithreading, multicore processors. Design Force is compatible with multiple client-server implementations. You can also work from your corporate cloud.

RadCAD uses an ultra-fast Monte-Carlo ray-tracing algorithm that is accelerated by octa-trees to compute radiation exchange and view factors. C&R Technologies' innovations to the ray-tracing process resulted in a highly efficient thermal radiation software. RadCAD models diffuse or specular surfaces accurately, regardless of the density of nodes. The number of nodes is determined by the thermal solution, not by the accuracy requirements for the radiation. RadCAD uses user-defined databases for optical properties. Each surface coating defines absorptivity and transmissivity as well as reflectivity and specularity for both solar and infrared spectrum regimes. These properties can be defined in relation to incident angle, or even wavelength dependence.

Tidy3D, Flexcompute's ultrafast electromagnetic solver (EM), is a fast and accurate electromagnetic solver. The solver uses the finite-difference-time-domain (FDTD). Tidy3D's simulations are orders of magnitude faster thanks to the highly optimized codesign of software and hard-ware. You can solve problems up to hundreds of wavelengths in size with the lightning-fast speed.

Fatigue Essentials is a desktop program that can be used to efficiently perform structural fatigue analysis. Fatigue Essentials is a user-friendly program that allows you to conduct stress-life analyses using either classical stress calculations or linked to FEMAP™, and using the finite element-generated stresses. The program follows a tree structure to guide users through the analysis. The following load, material, and spectrum branches provide general options for analysis. There are options for input methods and variations within each branch. Analyses results can be viewed on-screen and used to create reports or damage contour plots in FEMAP. Covers most engineering requirements. Classic mode with user input stress. Professional mode (FEMAP-linked). This mode allows you to read nodal stress and push back results in damage contour plots. You can choose to either input stress and cycles interactively or file input.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

GENOA 3DP is a software suite that allows you to create additive manufacturing designs for metals, polymers and ceramics. It is a versatile tool that can simulate printing and offers seamless user interaction. GENOA 3DP is fast and easy to integrate into any process that allows for the best AM build. GENOA 3DP is based on progressive failure analysis and multi-scale material modelling. It allows engineers to accurately predict crack growth, void, residual stress, crack growth, and other anomalies that are associated with AM parts. GENOA 3DP bridges material science and finite elements analysis by providing a repeatable method to improve part quality, reduce scrap rates, and meet specifications.

Ansys Sherlock, a reliability-physics-based electronic design tool, provides fast and accurate life predictions at the component and board levels for electronic hardware in early design stages. Ansys Sherlock automates the design analysis of electronic hardware. It provides accurate and fast life predictions at the component, board, and system levels during early design stages. Sherlock bypasses the 'test-fail-fix-repeat' cycle by empowering designers to accurately model silicon-metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. Sherlock quickly converts embedded libraries containing more than 500,000 parts into computational fluid dynamics and finite element analysis models. Each model includes accurate geometries, material characteristics, and stress information.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM 6 offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.

S-FRAME allows users to model, analyze, and design any structure, regardless of its geometry, material type, loading conditions or nonlinear effects. S-FRAME's automated frame generators quickly create models and import them with BIM or DXF import links. Users can also maximize productivity with integrated concrete/steel design tools that allow for design, optimization, code compliance and report generation. S-FRAME allows users to quickly create structures using modeling automation. They can generate regular framework structures and custom trusses. Users can also use clone tools for replicating a portion or all of the model. Importing existing BIM or DXF models can also help users save time. S-FRAME's advanced meshing tools create a finite element mesh. This allows users to generate detailed analysis results for their specific areas. These areas can be explored by users easily converting members into multi-shell models.

MSC Nastran is a multidisciplinary application for structural analysis that engineers use to perform static, dynamic and thermal analysis in the linear and nonlinear domains. It also includes automated structural optimization and award-winning embedded fatigue analysis technologies. All of this is enabled by high performance computing. MSC Nastran is used by engineers to ensure structural systems are strong, stiff, and durable. This helps to prevent structural failures (excess stress, resonance, buckling or other detrimental deformations) which could compromise structural function and safety. MSC Nastran can also be used to improve structural designs' economy and passenger comfort. Creating industry-leading product differentiations or optimizing existing designs can lead to industry advantages. Reduce downtime and costs by resolving structural problems that may arise during product service.

SwiftComp is a multiscale, multiphysics composite sim code that delivers 3D FEA accuracy at the speed of simple engineering models. SwiftComp makes it possible for engineers to model composites as easily and accurately as metals using traditional structural elements in their FEA codes. This allows them to capture all the microstructural details while preserving accuracy. SwiftComp enables unified modeling of 1D (beams), 2D(plates/shells) or 3D structures. This allows for the calculation of all the effective properties. SwiftComp can be used independently to simulate composite testing or as a plug in to your existing structural tools that support high-fidelity composites modeling. SwiftComp can calculate the best structural model to use in macroscopic structural analysis and perform dehomogenization in order to compute the pointwise stresses within the microstructure. SwiftComp interfaces directly with ABAQUS and ANSYS.

elec calculator™, which is completely inspired from Windows standard, has a multi-level UNDO/REDO button for all features. This makes your projects more secure. The product has a ribbon interface and contextual menus that allow you to quickly and easily reach the commands you need, as your project grows. Drag/drop is a quick way to achieve the synoptic installation. These objects are included in the software, but can be customized according to the project. The software creates a positioning grid that can be activated, and the objects have intelligent connections points. Keyboard shortcuts allow for the duplication of a whole or part of an installation. The new intellisense feature, which suggests the most likely components that will be connected to the selected component, facilitates and speeds up the production of the one-liner diagram.

During their lifetime, cold-forming tools are subjected to high mechanical and tribological stress. In some cases, these stresses can cause premature tool damage. The tools are an important part of manufacturing costs of a part, so it is important to anticipate these problems well during the design. COLDFORM®, allows you to analyze the mechanical die strength to prolong their service life. The software can calculate stress distribution in the die along with deformations and wear, temperatures, and damage at any point during the process. COLDFORM®, can perform rapid analyses consisting of applying stresses obtained from the forming process calculation to the tools. COLDFORM®, in addition, is capable of performing coupled tool/part computations that give extremely precise results. The functionalities dedicated to prestressed tools allow for accurate determination of the prestressing required to ensure the interference fit between the tools.