Alternatives to SINDA/FLUINT

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

Energy2D is an interactive multiphysics simulation program grounded in computational physics, designed to model the three primary modes of heat transfer: conduction, convection, and radiation, while also integrating particle dynamics. This software operates efficiently on a wide range of computers, simplifying the process by removing the need for switches between preprocessors, solvers, and postprocessors that are usually necessary for computational fluid dynamics simulations. Users can create "computational experiments" to explore scientific hypotheses or address engineering challenges without the need for intricate mathematical formulations. Additionally, development is ongoing to introduce various energy transformation types and to enhance support for different fluid types. While Energy2D excels in accurately modeling conduction, its representations of convection and radiation are not entirely precise, which means results involving these elements should be regarded as qualitative. Over 40 scientific papers have utilized Energy2D as a valuable research instrument, showcasing its adoption in the academic community. As the program evolves, its capabilities are expected to expand further, potentially offering more comprehensive insights into complex physical interactions.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

FloCAD® serves as an add-on module for Thermal Desktop®, creating a comprehensive software solution for thermohydraulic analysis that encompasses fluid flow and heat transfer. The process of constructing fluid flow models in FloCAD closely resembles that of thermal models, allowing for the use of numerous shared commands across both model types. Users can create FloCAD models using a free-form approach, which allows for the simplification and abstraction of flow networks, or they can opt for geometry-based modeling that incorporates elements like pipe centerlines, cross-sections, and intricate vessels, as well as convection calculations linked to finite difference or finite element thermal structures. As an advanced tool for pipe flow analysis, FloCAD effectively accounts for pressure losses within piping networks arising from bends, valves, tees, and variations in flow area, among other factors. This versatility makes FloCAD a valuable asset for engineers looking to optimize system designs.

Thermal Desktop encompasses every facet of creating models, integrating various built-in objects like finite difference, finite element, and lumped capacitance that can be arranged in numerous ways. Users can incorporate thermal-specific components such as contact conductance, insulation, heat loads, and heaters, enabling the modeling of a wide range of systems from automotive parts to crewed spacecraft. The software features comprehensive parameterization, allowing input through variables and complex expressions instead of fixed numerical values. These variables, known as symbols, facilitate swift adjustments to models with minimal effort, simplifying the process of updating or maintaining them, as well as conducting sensitivity analyses and exploring hypothetical scenarios. Furthermore, this capability enhances access to SINDA/FLUINT’s modules for optimization and reliability, along with automated model correlation, ultimately enriching the modeling experience. By streamlining these processes, Thermal Desktop not only improves efficiency but also fosters innovation in thermal analysis.

Experience the full spectrum of heat transfer processes, encompassing convection, radiation, storage, and dissipation, while addressing both steady-state and transient environmental conditions. TAITherm thermal analysis software combines simplicity with robust capabilities, effectively handling solar and thermal radiation, convection, and conduction in various dynamic environments. By alleviating the complexities associated with thermal simulations, TAITherm guarantees that your designs will perform at their best in practical situations. Engineers and teams worldwide rely on TAITherm, utilizing it for diverse applications that span cutting-edge developments in fields such as automotive, electronics, wearables, military technology, architecture, and beyond. Our clients are at the forefront of innovation, leveraging thermal simulations and analysis to enhance usability, safety, and efficiency in their respective domains, ultimately pushing the limits of technological advancement. With TAITherm, the future of thermal analysis is not only accessible but also transformative for industries striving for excellence.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

Simcenter Nastran stands out as a leading finite element method (FEM) solver known for its exceptional computational performance, precision, dependability, and scalability. This comprehensive tool provides robust solutions for various applications, including linear and nonlinear structural analysis, structural dynamics, acoustics, rotor dynamics, aeroelasticity, thermal analysis, and optimization. One of the key benefits of having such a diverse array of solutions within a single solver is that it standardizes input/output file formats across all types of analyses, significantly streamlining the modeling process. Whether utilized as an independent enterprise solver or integrated within Simcenter 3D, Simcenter Nastran is instrumental for manufacturers and engineering firms across several sectors, including aerospace, automotive, electronics, heavy machinery, and medical devices. By catering to their vital engineering computing requirements, it enables these industries to deliver safe, reliable, and optimized designs while adhering to increasingly tighter design timelines. This versatility and efficiency make Simcenter Nastran an invaluable asset in the modern engineering landscape.

CoTherm is a sophisticated coupling and process automation tool that serves as a liaison between various CAE applications. It simplifies the task of process automation, making it invaluable for conducting sensitivity analyses, executing design of experiments, or managing multiple CAE models within a unified framework. This functionality enhances efficiency in pre-processing, transient thermal analysis, and post-processing tasks. With a licensed version of CoTherm, users receive ready-made templates for frequently encountered coupling and automation challenges. The software also features advanced optimization functions that identify the most suitable input parameters for your design. Any CAE analysis can benefit from its general optimization subprocesses, ensuring improved outcomes. CoTherm employs a mathematically robust approach, incorporating both global and local optimization methods, which alleviates uncertainty and simplifies the design process. It seamlessly integrates with a wide range of popular thermal and CFD codes, and its robust features allow for the coupling of any software that operates via command line or configuration files. This versatility makes CoTherm a vital asset for engineers seeking to enhance their design workflows and optimize their simulation processes.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

Simcenter MAGNET serves as an advanced simulation tool for analyzing electromagnetic fields, enabling users to predict the performance of various components such as motors, generators, sensors, transformers, actuators, and solenoids that involve permanent magnets or coils. By facilitating low-frequency electromagnetic field simulations, Simcenter MAGNET offers comprehensive modeling capabilities that accurately represent the underlying physics of electromagnetic devices. Among its features are the modeling of manufacturing processes, temperature-sensitive material properties, and the intricate behavior of magnetization and de-magnetization, along with vector hysteresis models. The software’s built-in motion solver incorporates a six-degree-of-freedom functionality, which allows for the precise modeling and analysis of complex scenarios such as magnetic levitation and intricate motion dynamics. This advanced capability is bolstered by innovative smart re-meshing technology, ensuring that even the most challenging electromagnetic problems can be effectively addressed. Consequently, Simcenter MAGNET stands out as an essential tool for engineers and designers looking to optimize electromagnetic systems in a range of applications.

AnyCasting Software has established itself as a premier casting simulation tool for more than two decades. At present, we collaborate with manufacturers in sectors such as automotive, maritime, heavy materials, and electronics, having successfully sold over 600 licenses globally while providing expert consulting for more than 470 projects across various regions. The software offers advanced stress analysis capabilities, allowing users to effectively simulate deformation alongside heat and stress factors, while also facilitating automatic mold design to help in achieving the best mold configurations. Among our satisfied domestic clients are notable names like Hyundai Motors, Hyundai Heavy Industries, Samsung Electronics, and LG Electronics, among others. Furthermore, the software allows for precise identification of gas defects that may arise from air entrapment during the filling and flowing of molten material. By analyzing the pressure differentials between air and the melt, our technology successfully pinpoints these gas defects, enhancing the overall quality and efficiency of the casting process. This level of detail and precision showcases the software's commitment to improving manufacturing outcomes.

After over 34 years of refinement and input from users, Simcenter Flotherm has established itself as the premier software for electronic cooling simulations, specifically tailored for thermal analysis of electronics. This powerful tool accelerates product development across various levels, from IC packaging and PCB design to expansive systems like data centers. By utilizing rapid and precise CFD simulations, it enhances thermal management in electronics, ensuring reliability from the initial pre-CAD exploration phase to the ultimate verification stage. Simcenter Flotherm seamlessly integrates into the electronics development process, enabling thermal engineers to conduct simulations that yield prompt and precise results, which are crucial for collaboration with other engineering teams. Furthermore, it facilitates informed decision-making regarding thermal management from the initial architectural stages to the final verification of thermal designs. This comprehensive approach not only shortens development timelines but also mitigates the risks associated with expensive reliability failures and late-stage redesigns. In essence, Simcenter Flotherm stands as a vital resource for any organization aiming to enhance its electronic product performance while maintaining efficiency and reliability.

The STARe software represents the benchmark in thermal analysis, offering virtually endless evaluation opportunities. Its distinctive attributes encompass modular design, adaptability, and automation capabilities. Additionally, the software ensures compliance within regulated sectors. All thermal analysis systems are managed through a single, robust software platform, streamlining operations. We provide an extensive range of thermal analysis systems featuring an exceptional assortment of instruments tailored to various needs. STARe not only boasts ease of use but also powerful functionality. Users can send measurements and experiments to the instruments, allowing for immediate evaluation of the resulting curves according to their preferences. By establishing the standard for thermal analysis software, STARe proves to be a remarkably versatile tool that delivers exceptional flexibility and boundless evaluation possibilities. Furthermore, STARe serves as the central software driving all of METTLER TOLEDO’s thermal analysis systems, which significantly enhances overall workflow efficiency. This comprehensive approach ensures that users can rely on STARe for all their thermal analysis needs.

Harness the advantages of natural solidification thermal analyses with a cost-effective and efficient software solution. CAPlite is equipped with a user-friendly graphical interface, making it accessible for users with limited experience in casting software. Beginning with a CAD design, CAPlite provides a thorough walkthrough for every phase, from meshing to post-processing. The method of natural solidifications offers rapid thermal simulations, delivering results in mere minutes. Whether for die casting or sand casting, CAPlite is capable of pinpointing issues across all casting types. The straightforward nature of natural solidifications enhances your entire casting workflow, enabling the design of risers, gating, and chill configurations to detect flaws, while also aiding in visualizing the intricate solidification process. In addition to the robust features of natural solidifications, CAPlite offers even more resources, equipping you with the necessary tools to optimize your castings—all at a remarkably low price point. This comprehensive software empowers you to elevate your casting practices, making it an invaluable tool for both novice and seasoned professionals alike.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

RadCAD employs an advanced, oct-tree accelerated Monte-Carlo ray tracing algorithm to calculate radiation exchange factors and view factors with remarkable speed. The enhancements introduced by C&R Technologies in the ray tracing methodology have led to the development of a highly efficient thermal radiation analysis tool. By utilizing finite difference "conics" or curved finite elements from TD Direct®, RadCAD is capable of precisely simulating diffuse and specular reflections as well as transmissive surfaces, independent of node density. The thermal solution's requirements govern the node quantity, rather than the precision needed for radiation calculations. Furthermore, RadCAD allows users to create custom databases that specify optical properties, with each surface coating detailing its absorptivity, transmissivity, reflectivity, and specularity in both solar and infrared wavelengths. These optical characteristics can be tailored to account for variations in incident angles or wavelength dependencies, enhancing the accuracy and relevance of thermal modeling. Ultimately, this level of customization ensures that RadCAD meets diverse analytical needs across various applications.

The Pyris™ software platform breathes life into your PerkinElmer thermal analysis instruments and data, establishing itself as the standard for high-sensitivity thermal analysis. Known for its intuitive and user-friendly interface, Pyris stands out in the field of thermal analysis, offering a comprehensive suite of features that provides unparalleled flexibility. Whether utilized in a fully automated research environment, a quality assurance laboratory, or as a standalone tool, Pyris software is designed to fulfill a variety of operational needs. We prioritize user satisfaction by continuously improving the software based on feedback from our customers. With a unified platform across all instruments, users benefit from an easy-to-navigate system that is quick to master. Pyris software maintains its ease of use while ensuring robust capabilities, allowing for seamless data acquisition and analysis within a single interface, all while enabling the operation of multiple analyzers concurrently. This platform also boasts a diverse range of analytical options and offers flexibility for data import and export, making it a versatile choice for any thermal analysis task. Thus, Pyris software not only streamlines processes but also enhances productivity for users across various applications.

Experience the simulation of fluid dynamics, thermal transfer, and fluidic forces that are essential for achieving the desired outcomes of your projects. SOLIDWORKS® Flow Simulation is a user-friendly Computational Fluid Dynamics (CFD) tool integrated within SOLIDWORKS 3D CAD, allowing you to swiftly and effortlessly model the behavior of liquids and gases flowing through and around your designs to assess product efficacy and functionality. The SOLIDWORKS® suite is designed for ease of use, promoting a seamless collaboration that enhances your ability to create products in a more efficient and cost-effective manner. Through SOLIDWORKS Flow Simulation, you and your colleagues can replicate fluid movement, heat distribution, and the associated forces critical for your product's triumph. Organizations of varying sizes require cohesive solutions to foster innovation and advance their operations. By employing integrated CFD capabilities, you can effectively evaluate the impacts of fluid dynamics, thermal exchange, and associated forces on your projects, while also enabling the exploration of multiple "what if" scenarios to facilitate rapid design optimization. This approach not only enhances product quality but also accelerates the overall development process.

MSC Nastran is a versatile application for multidisciplinary structural analysis, allowing engineers to conduct various assessments, including static, dynamic, and thermal analyses, in both linear and nonlinear contexts. This software integrates automated structural optimization and award-winning fatigue analysis technologies, all powered by advanced computing capabilities. Engineers leverage MSC Nastran to guarantee that structural systems possess the required strength, stiffness, and longevity to prevent failures such as excessive stresses, resonance, buckling, or harmful deformations that could jeopardize structural integrity and safety. Additionally, MSC Nastran serves to enhance the cost-effectiveness and comfort of passenger experiences in structural designs. By optimizing performance in existing frameworks or creating distinctive product features, this tool provides a competitive edge within the industry. Furthermore, it assists in addressing potential structural problems that might arise during a product's operational life, thereby minimizing downtime and reducing associated costs. Ultimately, MSC Nastran empowers engineers to innovate and refine their designs effectively.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Calsep stands out as a premier provider of PVT simulation services tailored for the oil and gas sector. They have successfully tackled PVT modeling assignments across all seven continents. Their projects encompass EoS modeling for a diverse range of reservoir fluids, such as natural gas, gas condensates, near-critical fluids, black oils, and heavy oils. The cornerstone of Calsep’s offerings is PVTsim Nova, a dynamic PVT simulation tool designed for reservoir engineers, flow assurance experts, PVT laboratory engineers, and process engineers alike. PVTsim allows users to navigate the entire process from fluid sampling to design and process planning with ease. Users can perform quality checks on fluid compositions, create EoS models, manage water interactions, assess the risk of solids precipitation, and generate input for over 30 external simulators, which include some of the industry's most recognized reservoir, process, and flow simulation tools. With the release of PVTsim Nova 5.1, Calsep has integrated support for PRODML and Calsep Excel PVT Templates, enabling fluid composition and PVT data to be imported into PVTsim with just a single click. This seamless integration not only enhances user experience but also streamlines workflows, making it easier for professionals to manage complex fluid data efficiently.

HRS-AHED, a new software for the calculation shell and tube heat transferrs, features fluids and mixing assistance, sensible heat / condensate calculations, single and multi pass units with or without baffles, and many other features: fluid database and customizable geometries; project sharing; batch calculation; vibration analysis and reporting. We have searched scientific literature extensively to ensure that the most up-to-date methods of heat transfer engineering calculation are used in the software. AHED has been used successfully to design many heat exchangers, making it a software solution that is industrially proven.

Enhance engineering processes with the only comprehensive and user-friendly CFD platform designed for multidisciplinary design and optimization. Computational fluid dynamics (CFD) plays a crucial role in multiphysics system analysis, allowing for the simulation of fluid behavior and thermodynamic characteristics through advanced numerical models. Engineers leverage the Cadence Fidelity CFD platform for various design tasks, including propulsion, aerodynamics, hydrodynamics, and combustion, to enhance product efficiency while minimizing the need for costly and time-intensive physical testing. This robust Fidelity CFD platform offers a seamless end-to-end solution tailored for applications across aerospace, automotive, turbomachinery, and marine sectors. With its efficient workflows, massively parallel architecture, and cutting-edge solver technology, the platform delivers remarkable performance and accuracy, significantly boosting engineering productivity in addressing contemporary design challenges. Ultimately, Fidelity stands out by not only simplifying complex processes but also enabling engineers to innovate rapidly and effectively.

Autodesk CFD is a sophisticated software for computational fluid dynamics that allows engineers and analysts to forecast the behavior of liquids and gases with high accuracy. This tool significantly reduces the reliance on physical prototypes while enhancing understanding of fluid flow performance in various designs. It equips engineers with an extensive suite of robust tools aimed at optimizing system designs, managing thermal issues particularly in electronics cooling, and integrating Building Information Modeling (BIM) to improve occupant comfort in HVAC systems within Architecture, Engineering, and Construction (AEC) and Mechanical, Electrical, and Plumbing (MEP) sectors. Furthermore, the Application Programming Interface (API) and scripting capabilities enhance Autodesk CFD's functionalities, enabling customization and automation of routine tasks through the Decision Center. Additionally, the Decision Center streamlines the process of comparing system designs, thereby accelerating decision-making in design processes. This comprehensive approach not only improves efficiency but also empowers engineers to make more informed decisions in their projects.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

Develop more accurate models of your reservoir fluids by utilizing dependable and straightforward PVT software to calculate essential PVT properties. PVT Solver can effectively illustrate the behavior of petroleum reservoir fluids, making it an ideal choice for easy PVT simulation and exporting various fluid properties. You can analyze reservoir fluids through a simple three-step process, which involves using the easiest fluid properties software available for your PVT modeling needs. In Step 1, input the necessary data by identifying the existing separation system and entering the relevant field parameters. Step 2 involves comparing correlations, allowing you to visualize various correlation models for each fluid property. In Step 3, you will calculate properties by selecting a correlation for each property and defining the calculation range. It’s essential to utilize the most recognized fluid correlations in the industry, such as Sutton (2007) for gas pseudo-critical properties and Dranchuk-Abou-Kassem (DAK) (1975) for gas z compressibility or deviation factors. Additionally, Standing (1947) can be employed for bubble point calculations. Ultimately, these steps lead to a more comprehensive understanding of reservoir fluid behavior, enhancing your modeling accuracy.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

Augmentus is a cutting-edge software company specializing in AI and robotics, providing a no-code platform that allows users to swiftly program industrial robots without needing any previous experience in robotics. This versatile platform supports over ten leading robot manufacturers, such as ABB, Kawasaki, Universal Robots, Kuka, and Nachi, to streamline industrial automation solutions. By incorporating advanced 3D scanning technology, intuitive micro-adjustability, and automated code generation, Augmentus makes robotic automation accessible to everyone, greatly simplifying what has often been a complicated process. This innovative method empowers even those without technical skills to create robotic systems quickly and accurately, reducing programming time from several weeks to mere minutes and achieving cost savings of more than 70%. Augmentus caters to a wide array of industries, including aerospace, automotive, maritime, and oil & gas, with a particular emphasis on applications like robotic welding, abrasive blasting, thermal spraying, polishing, and grinding. Ultimately, Augmentus is transforming the landscape of industrial automation by enabling businesses to harness the full potential of robotics effectively and efficiently.

Altair Activate is utilized to model and simulate a diverse array of products as interconnected systems, facilitating the discovery of improved designs at an accelerated pace. As products across various sectors grow more intricate, electrified, intelligent, and interconnected, the need for advanced simulation tools becomes paramount. By leveraging multi-disciplinary system-level simulation capabilities, designers can develop sophisticated mechatronic systems more holistically, fostering enhanced collaboration and streamlined workflows among product development teams. Altair Activate effectively eliminates barriers between various subsystems, including mechanical, electrical, control, and electronic components, as well as software and hardware-in-the-loop interactions, alongside data analytics. Utilizing 1D modeling and simulation for thermal-fluid system dynamics allows for nearly equivalent accuracy to traditional 3D CFD methods, while significantly reducing timeframes, thereby promoting extensive design exploration and performance optimization more efficiently. This innovative approach not only speeds up the design process but also empowers teams to create more integrated and efficient product solutions.

SOLIDCast Casting Simulation software stands as the leading PC-based solidification modeling and casting design tool within the casting sector. This innovative software was created by thoroughly investigating and addressing the real-world challenges faced during the design and production of solid casts. Unlike many software developers who come from purely academic backgrounds, the team behind this simulation software boasts hands-on experience in foundries and the broader casting industry. Since 1985, they have leveraged their practical knowledge to enhance SOLIDCast and its associated products. The unique blend of expertise in software engineering and foundry operations has positioned SOLIDCast as the most pragmatic solution for professionals in the casting field. Additionally, SOLIDCast enables users to simulate the thermal variations that occur due to heat transfer during the solidification phase of the casting process. This capability not only streamlines workflow but also aids in achieving optimal results in cast design.

OpenFOAM is a free and open-source computational fluid dynamics (CFD) software that has been developed by OpenCFD Ltd since its inception in 2004. It boasts a vast user community spanning various engineering and scientific fields, including users from both industry and academia. The software offers a comprehensive suite of features capable of addressing a wide array of challenges, such as intricate fluid dynamics involving chemical reactions, turbulence, heat transfer, as well as applications in acoustics, solid mechanics, and electromagnetics. To ensure continuous improvement, OpenFOAM is released biannually, incorporating enhancements funded by users and contributions from the wider community. The software undergoes thorough testing conducted by ESI-OpenCFD's application specialists, development collaborators, and select customers, all supported by ESI's global network and commitment to quality. The assurance of quality is maintained through a stringent testing regime, which entails hundreds of daily unit tests, a moderate set of tests carried out weekly, and an extensive industry-focused test suite. This meticulous approach ensures that OpenFOAM remains reliable and effective for its diverse user base. Moreover, the collaborative nature of its development fosters a vibrant community that continually drives innovation within the software.

Managed Pressure Drilling (MPD), which encompasses Underbalanced Drilling (UBD) technologies, effectively manages the pressure profile of fluids in the annulus of a well, enabling the exploration of otherwise financially unviable drilling sites. A key objective of managed pressure drilling is to minimize the risk of damage to the formation, which in turn enhances overall production; thus, aerated fluids are frequently utilized in the drilling operation. In scenarios involving hard rock, the primary aim shifts towards boosting the rate of penetration (ROP), often utilizing air or mist drilling fluids. UBDPRO, a sophisticated modeling software, simulates the intricate hydraulics of compressible fluids such as air, mist, foam, and two-phase mixtures. This advanced modeling tool aids in fine-tuning the injection rates of both gas and liquid to maintain optimal bottomhole pressure, contributing to more efficient drilling outcomes. By leveraging such technologies, operators can significantly enhance both the safety and efficiency of the drilling process.

Dymola, or Dynamic Modeling Laboratory, serves as a comprehensive platform dedicated to the modeling and simulation of intricate, integrated systems applicable across various fields such as automotive, aerospace, robotics, and process engineering. This tool enables users to efficiently address complex multi-disciplinary modeling and analysis challenges by leveraging Dymola's advanced Modelica and simulation technologies. As an all-encompassing environment, Dymola facilitates the creation, testing, simulation, and post-processing of models, making it indispensable for engineers. In addition to its robust capabilities, Dymola features libraries developed by industry experts that enhance its functionality, allowing for rapid modeling and simulation of complex systems across diverse engineering disciplines. Furthermore, the Functional Mock-up Interface (FMI) enables any modeling software to produce C code or binaries that accurately represent a dynamic system model, thus broadening Dymola's applicability and integration into various workflows. This seamless interaction between different tools promotes efficiency and innovation in system design and analysis.

VSim is a sophisticated Multiphysics Simulation Software tailored for design engineers and research scientists who seek accurate solutions for complex challenges. Its exceptional integration of Finite-Difference Time-Domain (FDTD), Particle-in-Cell (PIC), and Charged Fluid (Finite Volume) methodologies ensures reliable outcomes across various applications, including plasma modeling. As a parallel software tool, VSim adeptly tackles large-scale problems, with simulations that execute rapidly thanks to algorithms optimized for high-performance computing environments. Renowned by researchers in over 30 countries and utilized by professionals across fields such as aerospace and semiconductor manufacturing, VSim guarantees results with verified accuracy that users can depend on. Developed by a dedicated group of computational scientists, Tech-X’s software has garnered thousands of citations in scientific literature, and VSim is prominently featured in many leading research institutions worldwide. Furthermore, its continued evolution reflects the commitment to meeting the ever-growing demands of modern scientific inquiry.

Calculate fluid flow quickly and accurately. The Pipe Flow Calculator will be a valuable tool for engineers, students and professionals who work with fluid dynamics. It solves fluid flow problems, both simple and complex, in under a second. Why Choose Pipe Flow Calculator? Easy to Use: Just enter values to get instant results. Trusted worldwide - used daily by thousands professionals. Reliable and Updated - Bug fixes in 1-2 days. Transparent Calculations: All formulas are provided. Key Features Change between imperial and metric units. Choose pipes, materials and fluids on predefined lists. Export results to Excel & Word. Save, print and continue where you left. Copy/paste the full calculation reports. Available Calculators Pressure Drop, Pump Performance, Pipe Diameter and Reynolds Number Orifice Plates, Venturi Tubes, Nozzles, Prandtl Probe Control Valve, LPG, Thermal Energy

RT-LAB is OPAL's real-time simulation program that combines performance and enhanced user experience. RT-LAB is fully integrated with MATLAB/Simulink® and allows for the most complex model-based design to interact with real-world environments. It allows for complex simulations in real-time, including those in aerospace, power electronics and power systems. RT-LAB was first applied on the Canada Arm of the Canadian Space Agency almost 20 years ago. It has revolutionized systems engineering in space, on ground, and at sea. RT-LAB allows engineers and scientists to quickly develop new prototypes and perform the most rigorous testing required for new technologies.

Enhance customer experiences both in physical locations and online, boost employee efficiency, drive increased revenue, and reveal valuable insights from in-store data using Mercaux’s Omnichannel and Unified Commerce Solutions. Our Composable Architecture empowers you to customize store transformations according to your vision, collaborate seamlessly with preferred systems, and implement changes swiftly. Provide your customers with a rapid, seamless, and adaptable checkout experience that outperforms traditional monolithic POS systems. Our comprehensive platform encompasses everything from Assisted Selling and Clienteling to Remote Selling via WhatsApp and the creation of a Universal Basket. Additionally, we offer In-store Self-Service Solutions featuring Basket Transfer and Checkout options, along with the ability to engage in Remote 1-to-1 Conversations with Store Associates. Track customer behavior from their initial interaction, through the creation of their shopping basket, all the way to the final purchase, while also monitoring Sales Associate activity and product interest funnels. Ultimately, this holistic approach ensures that both customers and staff benefit from a streamlined and engaging retail experience.

Multifunctional dynamics simulator that seamlessly integrates into Autodesk 3ds Max or V-Ray. Chaos® Phoenix can create a wide variety of effects, including smoke, liquids and flames, explosions as well as rigid body simulations, ocean waves and mist. It is easy to set up and quick to use, and the powerful simulation engine allows for complete control over more complicated effects. Chaos® Phoenix is a one-stop solution for fluid dynamics. Simulate fire, smoke and liquids, as well as ocean waves, splashes and mist, and other fluid dynamics. Designed for 3D artists who need to create dynamic FX quickly using presets, quick setup and intuitive controls. Viewport allows you to preview and render interactively. You can adjust simulations as you go. You can create all kinds of fluid effects based on physical properties using flexible controls that allow you to quickly render, retiming, and refine simulations. Integrated seamlessly into 3ds Max, optimized to render with Chaos Vray®.

Modelon’s OPTIMICA Compiler Toolkit stands out as the market's leading Modelica-based mathematical engine, providing users with a robust solution for automating, simulating, and optimizing system behaviors across the model-based design cycle. As the trusted compiler for Modelon Impact, OPTIMICA allows users to construct multi-domain physical systems by selecting from a vast library of model components. The toolkit’s cutting-edge solvers facilitate the evaluation of intricate physical systems, accommodating both transient simulations and steady-state calculations, as well as dynamic optimization. With its advanced mathematical capabilities, OPTIMICA can effectively manipulate and streamline models to enhance performance and reliability, catering to diverse industries and applications that range from automotive and active safety to energy and power generation optimization. Given the growing demand for effective power regulation in the contemporary energy landscape, optimizing the startup processes of thermal power plants has become a critical industrial requirement. Furthermore, the flexibility and efficiency of OPTIMICA make it an invaluable asset for engineers tackling complex system challenges.

Vampire (Virtual Additive Manufacturing System): This software simulates 3D printing in order to predict and analyze the results. It also performs heat transfer analysis and deformation analysis based on thermal expansion and prediction. It is important to identify and address various manufacturing problems in advance, as 3D additive manufacturing can be expensive and time-consuming. This can be done by using analysis techniques that are suitable for additive manufacturing. Vampire offers key tools to build a smart preprocessing system for this purpose.

The Assent platform excels at intricately mapping out the multifaceted supply chains within manufacturing sectors such as aerospace and defense, automotive, electronics, industrial equipment, and medical devices. By overseeing suppliers, products, and components, we ensure that your offerings meet safety, compliance, and sustainability standards, covering everything from product compliance to ESG. Only Assent endeavors to chart the complete manufacturing genome, paving the way for genuine supply chain sustainability. With unparalleled insights into suppliers, products, and parts at the most granular level, your organization is empowered to lead, expand, and succeed in today's competitive landscape. Gain a comprehensive understanding of sustainability across your enterprise, pinpoint and address crucial challenges, and remain proactive with automatic regulatory updates, among other advantages. Assent uncovers hidden insights, affirms quality, and helps mitigate unexpected challenges. Our range of solutions, spanning from product compliance to ESG, enables the globe's most sustainable manufacturers to thrive in their respective markets. By partnering with Assent, you not only enhance compliance but also contribute positively to the environment and society.