Alternatives to RWIND

Orbital Stack, an AI and CFD web-based program, provides earlier qualitative guidance. It compares a wide range of land-use options and shapes, and highlights any red flags. It allows for climate-conscious, high performance developments that are not possible with traditional studies. Orbital Stack was developed by world-renowned experts in microclimate engineering and wind. It is a game-changer in the architecture and building design industry, providing our clients direct access for wind comfort and safety analysis as well as thermal comfort and shadowing analysis and cladding pressure simulations. This allows architects to quickly understand the climate effects of their proposed building designs and make better decisions, resulting in more resilient and high-performing projects.

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

MecaWind is a windload calculator software that calculates wind loads and/or pressures on buildings and other structures (chimneys and towers, open signs and closed signs, rooftop equipment, canopy and bins, tanks and silos, as well as free-standing walls and roofs). It is based on the ASCE 7 standard for design loads in the United States, which is published annually by the American Society of Civil Engineers. MecaWind's wind load calculator software includes multiple versions of the ASCE 7 standard and the Florida Building Code (FBC). It includes ASCE 7-05 and ASCE 7-10 versions, as well as ASCE 7-16 versions of the same standard. This article contains many of the changes from ASCE 7-10 to ASCE 7-16. MecaWind also includes ASCE 7-05, but this older version is less commonly used in jurisdictions.

AKL FlowDesigner, a computational fluid dynamics software (CFD), allows wind analysis by importing 3D models of buildings and urban blocks created using modeling tools like Autodesk Revit. GRAPHISOFT ArchiCAD, Rhinoceros, SketchUp, Rhinoceros, Rhinoceros, Rhinoceros, and Rhinoceros. AKL FlowDesigner can be used in IFC format. AKL FlowDesigner can be used by architects, designers, engineers, and consultants to visualize and understand the airflow around their projects. Clients are more likely to be impressed by a client's early analysis, which reduces design time. CFD simulation with AKL FlowDesigner allows you to reap the full benefits of AEC (architecture engineering and construction). Airflow simulation used be a time-consuming and complex task that required technical knowledge. Now, it's easy to do airflow simulations. AKL FlowDesigner makes it easy to create simulations and analyze the airflow in just minutes. No need to have an engineering degree or perform complex calculations.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

Autodesk CFD, a computational fluid dynamics simulation program, is used by engineers and analysts to predict how liquids will perform. Autodesk CFD reduces the need for physical prototypes and provides deeper insight into fluid flow design performance. Autodesk CFD offers engineers a variety of powerful tools to optimize system design. Fluid flow and surface movement are possible. Thermal management for electronics cooling. BIM integration to ensure occupant comfort in HVAC systems in AEC and MEP. The Decision Center allows customization and automation of common tasks through the Application Programming Interface (API), and scripting functions. The Decision Center automates system design comparisons in order to accelerate design-based decision making.

ENVI-met 3D microclimate simulation software. It can be used for many purposes, including urban planning, building design, energy efficiency, and other climate parameters. ENVI-met can simulate many climate conditions, including day and night temperatures, humidity, wind speed and solar radiation in cities. The software can simulate the effects of different building materials such as glass or stone on the climate in the surrounding environment. It is used to predict how urban design changes will affect the microclimate and human thermal comfort in cities around the world. It is vital that cities become more resilient and healthier as climate change is having a significant impact on the planet. ENVI-met can help support these goals by assessing the potential of new buildings, green space, and urban planning, and making informed decisions.

The iStruct®, application suite, is essential for the design, specification, and delivery of structural products in residential or light commercial construction. These applications seamlessly integrate to share common features such as pricing, product availability, templates, and customer data. This makes it easier to deliver consistent results while requiring less effort. iStruct®, which was designed with interdepartmental collaboration as its goal, increases your company's output and streamlines the design process. This results in greater efficiencies, cost savings, and time and money savings. All components of the wall can be analyzed for gravity and wind.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

windPRO covers everything, from wind data analysis, calculation, energy yields, quantification, uncertainty assessment, site suitability assessment, to calculation, visualization, and visualization of the environmental impact. windPRO can also help with the post-construction analysis and visualization of production data. Each module can be used in its own separate modules. WindPRO allows you to model any type of wind energy project. From the simplest single-turbine project to large-scale multimast, multiturbine, and multi-neighbor projects. The catalog of over 1000 models approved by manufacturers will help you choose the right model wind turbine. The available wind resource is a major factor in energy costs. WindPRO can help you find the best locations by using wind resource maps. The optimized OPTIMIZE module will do all the hard work to find the best turbine layout.

Wind is difficult to understand. Wind's behavior in urban environments can become more complicated when it comes into contact with buildings. This can lead to many effects, including vortices, speed-ups (Venturi effect), plunging flows and interference. This creates a microclimate which can cause discomfort for users. These aerodynamic phenomena are essential for sustainable architecture and urban planning. It is important to understand them and to incorporate them in urban projects as soon as possible. In many countries, project owners are increasingly asking for its study. It is essential for the development of outdoor public spaces and the well-being users. UrbaWind allows the calculation of wind comfort for pedestrians based on the comfort standards of different countries.

Ansys Fluent, the industry-leading fluid sim software, is known for its superior physics modeling capabilities as well as industry-leading accuracy. Ansys Fluent allows you to innovate and optimize your product performance. You can trust your simulation results when you use software that has been thoroughly tested across a variety of applications. Ansys Fluent allows you to create advanced physics models, analyze fluid phenomena, and more - all in an intuitive and customizable environment. This powerful fluid simulation software will accelerate your design cycle. Ansys Fluent has the best-in-class physics models. It can efficiently and accurately solve large, complex models. Ansys Fluent unlocks the potential for CFD analysis. Fluid simulation software that is fast and efficient. This software will help you to be the best in the market. Fluent's industry-leading features allow for endless innovation without compromising on accuracy.

MasterSeries PowerPad provides a complete structural analysis, design and optimization suite. It is an ideal choice for engineers who need a wide range in design capabilities at a very affordable price. MasterSeries PowerPad bundles lite versions of core analysis and design programs to provide a wide variety of well-established programs at a fraction of the full price. PowerPad's core module is the powerful MasterFrame analysis module. This module integrates directly with our timber, concrete, composite and steel design modules to provide a seamless, integrated 3D analysis and design environment. PowerPad (Student edition) is a free version our commercial PowerPad Plus structural design and analysis software suite. PowerPad is not a collection of proformas. It's a bundle of lite copies of the real programs. Simple steel, concrete, or timber beam designer. Analysis of beams and trusses, space frames, grillages, and plane frames.

Ingrid Cloud is an online tool which automates the entire process for wind simulations. Our computational model requires virtually no human intervention. It is easy to use and accurate. CFD is easy and affordable with us. This unique technology is based upon research at KTH Royal Institute for Technology over the past 15 years.

MkaPEB offers a variety of templates for steel roof truss and portal frames with variable cross-section. These templates include parametric features for all roof systems. They can be arranged side-by-side or at different levels if necessary. After taking the wind-related parameters from the regulations, the distributed loads coming onto the roof and facades are automatically calculated. The loads that are coming to the roof or facades are automatically transferred onto the roof and wall purlins, and then to main carrier system. The snow accumulation between roof systems is a major problem when calculating snow loads. For snow accumulation, the load increase is calculated using ASCE-07-16 and EN-1991-1-3.

MasterSeries, the UK's most popular range of integrated structural analysis and design, drafting, detailing, and drafting software, has over 10,000 users around the world. MasterSeries offers the most comprehensive range of structural engineering software available. It includes the industry-leading multimaterial BIM-enabled modeling environment and a collection powerful stand-alone modules. This means that you can do more with one package. You don't have to switch between incompatible software or enter the same data multiple time. Software should be tailored to each business. MasterSeries' modular product range provides a flexible and scalable solution that is both flexible and scalable. This allows you to choose the right product for you, and not be forced to purchase a large product with many features that you don't require. Simply combine the modules that you need to create the perfect software solution for your business.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Simulate the fluid flow, heat transfers, and fluid forces that are crucial to the success of your designs. SOLIDWORKS®, Flow Simulation is an intuitive Computational Fluid Dynamics solution (CFD) embedded in SOLIDWORKS3D CAD. It allows you to quickly and easily simulate liquid flows through and around your designs to determine product performance and capabilities. SOLIDWORKS®, products are simple to use and easy to learn. They work together to help you design better products, faster and more efficiently. SOLIDWORKS® Flow Simulation allows you and your team simulate fluid flow, heat transfer and fluid forces that are crucial to the success and viability of your product. Companies of all sizes require integrated solutions to innovate and grow their businesses. You can quickly optimize designs by using integrated CFD tools that efficiently analyze fluid flow, heat transfer and related forces.

Create particle simulations for Autodesk's 3ds Max faster than competing fluid dynamics plug-ins. Artists without any programming or scripting knowledge can use a procedural geometry moderator. Give users access artist-friendly workflows for channel editing similar to node based image compositing applications. Autodesk 3ds Max SDK does not offer access-optimized geometry or particle lookup operations. AWS Thinkbox Stoke accelerates and simplifies the creation of large-volume particle clouds. Formats such as PRT, RealFlow BIN and simulations from FumeFX Particle Flow cebas thinkingParticles and 3ds max force Space Warps are supported. Create and simulate new fields including velocity fields and the loading and storing of field data using industry standard formats. Combine field data with subsystems of 3ds Max, such as Particle Flow and MassFX.

With STAAD, you can design, analyze and document structural projects anywhere in the world. It provides a flexible solution that covers all aspects of structural engineering, starting from the foundation. STAAD is a comprehensive structural finite elements analysis and design program that allows users to analyze any structure that is exposed to dynamic, wind, earthquakes, thermal, and other moving loads. STAAD is available in a variety of versions so you can choose the one that suits you best. STAAD is a popular application for structural analysis. It is well-known for its flexibility, interoperability, time-saving abilities, and analysis. STAAD is a 3D structural analysis tool that allows structural engineers to design steel and concrete structures. An analysis model can be created from a physical model created with the structural design software. STAAD incorporates many design code standards.

VABS is a cross-sectional analysis tool that can be used for general purposes. It can quickly and easily compute beam properties and recover 3D fields from composite beams. It is the only tool that can decouple a 3D slender, with complex microstructure, into an engineering beam model. AnalySwift is a product of the aerospace industry. It has been used to create composite beams (helicopter blades, propellers and high aspect ratio wings), plates/shells and 3D structures. VABS has been used for many years in the wind turbine industry. It produces rapid and accurate results when modeling blades. SwiftComp also offers plates/shells and 3D structures made from composites. The automotive industry is increasingly using composites. This opens up more opportunities to use SwiftComp and VABS for modeling a wide range of structures including beams, plates, shells, and so on.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

Simpack is a general multibody simulation (MBS), which allows engineers and analysts to simulate non-linear motions of any mechanical or mechatronic systems. Simpack allows engineers to create and solve virtual 3D models to simulate dynamic motion, coupling forces, and stresses. Simpack is used in the automotive, engine and HIL/SIL/MIL sectors. However, it can also be applied to other branches of mechanical engineering. Simpack simulation software is especially well-suited for high frequency transient analysis, even in the acoustic range. Simpack was originally designed to handle complex nonlinear models with flexible bodies, and severe shock contact.

CONSELF allows you to use Computational Fluid Dynamics and Finite Element Analysis (FEA), which can be used to improve the design of your product: minimize drag and fluid dynamics losses; maximize heat exchange performances; estimate pressure loads; verify material resistance; evaluate components shape deformation; calculate natural frequencies, modes and other modes. Structural Mechanics can be performed dynamically or statically, using both elastic and non-elastic materials. You can also perform frequency and modal analyses starting from the most common CAD neutral file formats.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

Virtually test drive your business processes. Process simulation allows you to take processes for a spin and identify potential roadblocks. Cutting-edge process mapping and simulation software that is designed to help organizations with process improvement, increase efficiency, and reduce waste. Ability to simulate real-world scenarios and provide insights into the performance and bottlenecks of processes. Powerful analytics and reporting capabilities allow tracking and monitoring the performance of processes over time.

ProModel is a discrete event simulation technology that can be used to plan, design, and improve existing manufacturing, logistics, and other operational systems. It allows you to accurately model real-world processes including their inherent variability, interdependencies, and potential changes. Optimize your system to meet your key performance indicators. From CAD files, process or values stream maps or Process Simulator models, create a dynamic, animated computer model that represents your business environment. You can clearly see and understand the current policies and processes in action. Use the model to brainstorm possible changes and to create scenarios to test them. You can run different scenarios and compare the results in the Output Viewer, which is built with the latest Microsoft®, WPF technology.

Radiance is a tool that aids lighting designers and architects in predicting the light levels and appearances of spaces before construction begins. The package includes programs to model and translate scene geometry, luminaire data, and material properties. All of these are required inputs to the simulation. Ray tracing techniques are used to calculate radiance values (ie. The amount of light passing through a particular point in a certain direction. These values are usually arranged to create a photographic quality image. The image can be displayed, edited, and modified within the package. It can also be exported to other image file formats, which allows for easy production of hard-copy output. Radiance's main component, and the most important, is the lighting simulator engine. It calculates light levels and renders pictures.

The innovative platform enables you to design sustainable processes at the speed that the market demands. AVEVA Process Simulator brings agility to the entire process cycle of design, simulation and training. This allows engineers to accelerate the engineering process. Engineers can work together across disciplines on a single platform that allows them to explore all dimensions of potential designs and quantify their impact on sustainability, feasibility, profitability, and sustainability. You can save time by using the same simulation for all engineering phases, including fluid flow and dynamics modes. So that every engineer can see the impact of their programs, replace dozens of specialized programs. Create an agile engineering workflow that allows concurrent use of process, utility, control, as well as mechanical engineers.

ProModel is a discrete event simulation technology that can be used to plan, design, and improve existing manufacturing, logistics, and other operational systems. It allows you to accurately model real-world processes including their inherent variability, interdependencies, and potential changes. Optimize your system to meet your key performance indicators. From CAD files, process or values stream maps or Process Simulator models, create a dynamic, animated computer model that represents your business environment. You can clearly see and understand the current policies and processes in action. Use the model to brainstorm possible changes and to create scenarios to test them. You can run different scenarios and compare the results in the Output Viewer, which is built with the latest Microsoft®, WPF technology.

ReluxDesktop, a high-performance, intuitively operated application that simulates artificial light and daylight, is highly-efficient. It can provide quick and efficient support for all aspects of large and small projects without any unnecessary loops. Simulating lighting and sensors in real time! Calculation of absolute values, national, and international standards, compatible CAD and BIM systems. And much more. Thanks to our industry partners, the application is free to you. ReluxDesktop will become your daily tool. You'll be amazed at how much time you can save! Add-on for other applications Autodesk Revit functions. Add-on to ReluxDesktop Based on current standards, real tunnel calculation.

AGVortex program models airfoils' flows. It includes a 3D editor, control panel and modeling area. The solver is based upon vorticity dynamics. This allows you to solve LES turbulence model using multi-core processors or clusters that use parallel computing.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

World-class data management solutions developed in collaboration with an international energy company. Prediktor, our data management software is a component architecture that supports Industrial Internet of Things (IIoT), interoperability with various industry standards protocols and approaches. It uses OPC UA technology to achieve interoperability and transparency in industrial operations. The component strategy of this architecture ensures that each deployment is able to balance the right level functionality and complexity, without sacrificing robustness. Prediktor APIS, a standardization unique to the industry, provides a unified method of accessing and viewing all types of data associated with wind assets. This creates a highly-efficient'software platform' which can quickly and easily develop practical IIoT apps at scale.

SIMULIA is powered by the 3DEXPERIENCE®, platform. SIMULIA provides realistic simulation applications that allow users to see the world around them. SIMULIA applications speed up the process of evaluating performance, reliability, and safety of products and materials before committing to physical prototypes. Powerful simulation of structures, fluids and electromagnetics scenarios, including complex assemblies, directly linked to the product data. The 3DEXPERIENCE Platform integrates modeling, simulation, visualization technology, process capture, publication and re-use. Customers can maximize the value of their existing investments in simulation horsepower by allowing simulation data and results to be connected to the platform. This allows for true corporate assets that fuel innovation for all users.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.

The Akselos Cloud platform provides a complete Digital Twin framework through the cloud. It offers an end-to-end solution that automates asset condition updates and asset loads, as well as clear dashboards that show current asset integrity.

AI and graph technologies can optimize building design. Get immediate feedback on performance. Detect errors and find optimal solutions at the early stages. Get flow with a tool that focuses on buildable exploration. You can freely switch between massing, story design, setting programs and space planning. Compare variants within seconds. Plans are automatically added to stories. No need to go back and forth in Excel to calculate key figures. Instantly see how you compare to your customers' needs. You can also calculate your carbon footprint and view the daylight simulation. Built-in error prevention ensures you stay within the limits. Finch will ensure that your buildings comply with the rules set forth by your firm, your customer, or your municipality. Focus on the design, and Finch will stay in the background. Share a fully interactive, 3D model with anyone who has a browser. Let them comment on the massing, plans and objects in your design. Get feedback on your project.

Lanner's desktop modeling software, WITNESS Horizon is the most powerful, flexible, and proven process simulation technology. It allows professional modelers to quickly develop feature-rich models as well as simulation apps. This allows them to gain unparalleled insight through dynamic data visualization, and the freedom to test their choices in a safe virtual environment. With a wide variety of standard elements, you can quickly get your models up and running with simple configuration and unique logic controls. Combining continuous flows with discrete events in models can help you address a wide variety of business problems in the most efficient way. Continuous elements allow the modeling of fluids flowing through pipes and tanks, as well as situations where large volumes of parts pass through processes at speeds that can be easily represented by fluid flows.

Your designs can be tested under real-world conditions to improve product quality and reduce prototyping and testing costs. SOLIDWORKS®, Simulation is a simple-to-use suite of structural analysis tools that uses Finite Element Analysis to predict a product’s real-world physical behavior. This can be done by virtually testing CAD models. The portfolio offers dynamic, static, and linear analysis capabilities. SOLIDWORKS Simulation Professional allows you to optimize your design, determine product mechanical resist, product durability, and test heat transfer instabilities and buckling instabilities. It can also perform multi-physics sequential simulations. SOLIDWORKS Simulator Premium allows you to efficiently evaluate your designs for dynamic response, nonlinear, and composite materials. SOLIDWORKS Simulation Premium offers three advanced studies: Nonlinear Dynamic, Linear Dynamics, and Non-Linear Static.

Ansys Motion is now available in the Mechanical interface. It is a third-generation engineering solution that uses a multibody dynamics solver. It allows for fast and accurate analysis both of rigid and flexible bodies. Additionally, it provides accurate evaluations of physical events by analyzing the entire mechanical system. Ansys Motion employs four integrated solutions: rigid body, flexible, modal, and meshfree EasyFlex. This gives you unprecedented capabilities to analyze systems and mechanism in any combination that you choose. With the inclusion of contact and flexibility, large assemblies can be studied with millions of degrees of freedom. These systems can then be connected and loaded using standard connections and joints. Simulating in Ansys Motion through the same interface as regular structural analysis allows you to save time and make your model work for multiple purposes.

Engineering groups are using niche software tools from different vendors to simulate product attributes. Multi-vendor software products can lead to inefficiencies and increase costs. SIMULIA offers a scalable suite unified analysis products that allows all users, regardless their simulation expertise or domain focus to collaborate seamlessly and share simulation data and approved methods without losing information fidelity. Abaqus Unified FEA offers powerful and complete solutions to complex engineering problems across a wide range of industrial applications. Automotive industry engineering groups can consider full vehicle loads, dynamic vibrations, multibody systems and impact/crash using a common model structure and integrated solver technology.

We combine AI and concierge services to deliver a delightful financial back-office experience. We specialize in providing reliable bookkeeping and detailed financial models exclusively for startups. You can always count on accurate books being delivered every month. Our concierge team can be paired with AI to provide a new level in transparency and accuracy in accounting. If it takes three weeks for your books to be closed, you won't have access to real-time financial information. So you can make quicker business decisions, we close your books in days instead of weeks. The boat's movement determines the wind speed. A stationary point on the ground can only measure wind speed, which is what finance does. So you can navigate the oceans, we give you the actual wind speed readings.

ColdStream is an engineering platform for thermal simulation that runs in the cloud. It supports your entire thermal management process, from thermal design to thermal analysis. Diabatix's Thermal Simulation Software allows your business to accelerate product development by using only the latest technologies. Get insights on temperature distribution, heat dissipation and fluid flow, thermal resistance and thermal radiation, cooling capability, and more. ColdStream will find the most suitable heat sinks for your electronic devices and products. In just a few simple clicks, you can upload your geometry, configure the thermal simulator operating conditions, and set the design objectives for your heat sinks.

HIPAA-compliant storage for protected health information (PHI), as well as employee and business data from legacy programs. Consolidating information silos will help you meet data retention requirements, reduce costs, and strengthen cybersecurity defenses. A healthcare data archiving solution is designed to give secure, easy access legacy patient, employee, and business records. Information release, addenda, and record purging/destruction workflows. Agency management of transaction files and workflows for collection. Access to employee records such as W2s, payrolls, attendance, OSHA, exposures, and OSHA time and attendance. You can create unlimited notes and make comments in accordance with HIPAA regulations. To make informed care decisions, you can view or share lab results, flowsheets, growth charts, and other clinical data. Clear and concise results can be obtained by searching structured data.

WaveFarer, a high-fidelity simulator of radars, accounts for multipathing and scattering caused by structures and vehicles within the immediate environment. It also accounts for atmospheric and scattering effects at frequencies up to 100 GHz and beyond. Applications include simulations of automotive drive scenarios and indoor sensors. WaveFarer features allow for fast and accurate analysis in a simulation of scenarios where radars are in close proximity to targets, structures, and other features. WaveFarer supports all applications that are relevant to the analysis and simulation of a radar system. This includes evaluating the placement of radar sensors and target returns in a simulated driving scenario. This includes the analysis of target radar cross-section (RCS) as well as the impact of materials.

nCode DesignLife is an online design tool that identifies key locations and calculates realistic fatigue life from leading finite element results for metals and composites. Designers can do more than simple stress analysis. They can simulate actual loading conditions and avoid costly design changes. Products can include functions for fatigue of welds and vibration fatigue, crack growth detection, fatigue in composites, and thermo-mechanical fatigue analysis. Advanced technology for multiaxial, vibration, crack growth and thermo-mechanical fatigue. A graphical interface that makes it easy to perform fatigue analysis using the most popular FEA results data such as ANSYS, Nastran and Altair OptiStruct. Multi-threaded and distributed processing capabilities to process large finite element models as well as complete usage schedules.

Forum8's interactive VR Design Studio* software is used by hundreds of research and urban planners as well as transportation authorities, vehicle manufacturers, and vehicle manufacturers on all four continents. It creates fully immersive, realistic models for the built environment. Interactive 3D VR Simulation and Modeling Software VR-Design Studio allows users to dynamically manipulate 3D space and run unlimited simulation scenarios. Users can also import and edit CAD data and build and texture models. Additionally, they can automatically add roads, tunnels, bridges, and other design options in real time, both online and off. The models can be viewed and interacted with by users. This allows them to analyze the potential environmental impacts of the proposed development.