Alternatives to PLAXIS LE

RS2 allows you to easily analyze stress/deformation and stability of any project, regardless of whether it is above ground or below ground. RS2's integrated Seepage Analysis Tool allows you to factor in groundwater flow for both steady-state and transient conditions. Automate your slope stability analysis using shear strength reduction. This performs a finite element analyze to determine the critical strength reduction factor. You can analyze embankments using slope stability, groundwater leakage, consolidation, or dynamic analysis. Groundwater and dynamic analysis tools are available in RS2. There is also a large library of advanced constitutive models that can be used to capture the sudden loss in strength caused by liquefaction. This tool is suitable for both underground and open-pit excavations. It can analyze stability, stress/deformation and bench design. It also supports the design and support of underground caverns.

Every project is difficult, but the geotechnical analysis does not have to be. PLAXIS 2D offers fast computations. Advanced finite element and limit equilibrium analysis of rock and soil deformation and stability. Also, soil structure interaction, groundwater and heat flow. PLAXIS 2D, a powerful and easy-to-use finite-element software for 2D analysis and stability in geotechnical and rock mechanics, is available. PLAXIS is used by the top engineering firms and institutions in civil and geotechnical engineering. PLAXIS 2D can be used for many applications, including excavations, foundations, embankments, and foundations, as well as tunneling, mining and oil and gas extraction. PLAXIS 2D provides all the necessary tools to perform safety analysis and deformation of soil and rock. It does not need to take into account creep, steady-state groundwater, thermal flow, consolidation analysis or any other time-dependent effects.

Geotechnical Engineering Modelling Software is a CAD software that allows foundation design and analysis to be performed intuitively. GEMS foundation analysis suite uses finite element modeling techniques to analyze and design shallow and deep foundations. The foundation analysis suite contains modules for analysing pile foundations, beam foundations, and a module that can analyze offshore pile foundations. GEMS foundation analysis suite is available for free on the cloud. You can also download it for free and purchase it for PC & Mac.

PLAXIS 3D provides the most important functionality to perform safety analysis and deformation for soil and rocks. This software is designed to allow you to model in 3D. Easy to create and scale construction sequences. Stable-state groundwater flow calculations can be done, including boundary conditions, material parameters, drains, wells, and drains. To model soil-foundation movement, such as slipping or gapping, use interfaces and embedded piling elements. You can get reliable results using realistic soil models and a full range of visualization capabilities. PLAXIS 3D provides different calculation types to address the unique geotechnical issues of soil structure interactions.

Quick and easy stability analysis of underground crown pillars or surface roofs using three different limit equilibrium analysis methods: elastic plate, rigid plate, and Voussoir plate analysis. Probabilistic analysis is used to determine the likelihood of failure. By assigning statistical distributions of variables, you can model variability in geometry, point force application, joint strength, bedding strength, water pressure, and external loads. To evaluate the impact of changing model parameters on safety factor, perform sensitivity analysis with a range of values. This method was originally designed for steeply dipping ore bodies. By estimating crown geometry, and assessing stope geometry as shallow or steep, you can apply the best empirical relationships to your model.

Patran offers a set of powerful tools to help you create analysis-ready models for linear, nonlinear and explicit dynamics solutions, thermal solutions, and more. Patran's tools make it simple for anyone to create FE-models. From geometry cleanup tools to help engineers deal with gaps and slivers, to solid modeling tools to allow creation of models completely from scratch, Patran is easy to use. Surfaces and solids can be meshed using fully automated routines, manual methods for more control, or a combination of both. Finaly, loads, boundary condition, and analysis setup are built-in for most popular FE Solvers, reducing the need to edit inputs. Patran's comprehensive, industry-tested capabilities ensure that virtual prototyping efforts deliver results quickly so that you can evaluate performance of products against requirements and optimize designs.

Simcenter Femap is an advanced simulation program that allows you to create, edit, and inspect finite element models of complex products and systems. Simcenter Femap allows you to create complex models of components, assemblies, and systems. This allows you to determine the model's behavior when it is exposed to real-world conditions. Simcenter Femap, which is a powerful data-driven and graphically driven results visualization and evaluation, can be combined with Simcenter Nastran to provide a comprehensive CAE solution that enhances product performance.

The Petrel E&P platform combines transparent data flows and a simple-to-learn graphical interface--Petrel Reservoir Geomechanics-that supports the VISAGE sim configuration and results visualization. This allows the powerful functionality of VISAGE simulator to be seamlessly combined with other interpretation, modeling and engineering workflows within Petrel. The Petrel platform-enabled workflow allows you to include multiple data types in order to create new 3D stress and geomechanics properties, or to add geomechanics data for existing reservoir subsurface models. This seamless combination within Petrel ensures that the geomechanics model can be integrated with geophysics and geology as well as reservoir data.

SolidFEA, our innovative solid finite-element analysis tool, is designed to make advanced structural design affordable and accessible. It is powered by the Calculix engine and offers detailed sub-model analyses at a lower cost and with less hardware than competitors such as Abaqus. SolidFEA is ideal for complex engineering challenges such as steel connections and bridge design. Its ease of use, IFC file compatibility and ease of use make it a great complement to our GenFEA structural analysis software. SolidFEA is a revolutionary step in structural engineering, bridging a gap that existed for ages due to prohibitive costs, complicated learning curves and high-end computing demands associated with solid finite elements analysis (FEA). It is designed for ease of use and supports IFC file formats, making it an easy addition to engineering workflows.

SafeGrid Earthing Software is ideal for designing earthing systems. The software can perform accurate, finite element based calculations. SafeGrid Earthing software has been proven to be affordable, reliable, and easy-to-use. The software calculates substation grid resistance, touch and voltages, and lightning protection. The software has been helping industries for the past ten years. It includes all modules necessary to design a safe earthing system in the safe grip. It includes: Fault current distribution. Soil modelling. Grid. Safety criteria Secure results You also get support from our earthing experts engineers along with the software. SafeGrid Earthing software saves time and money on your projects.

With STAAD, you can design, analyze and document structural projects anywhere in the world. It provides a flexible solution that covers all aspects of structural engineering, starting from the foundation. STAAD is a comprehensive structural finite elements analysis and design program that allows users to analyze any structure that is exposed to dynamic, wind, earthquakes, thermal, and other moving loads. STAAD is available in a variety of versions so you can choose the one that suits you best. STAAD is a popular application for structural analysis. It is well-known for its flexibility, interoperability, time-saving abilities, and analysis. STAAD is a 3D structural analysis tool that allows structural engineers to design steel and concrete structures. An analysis model can be created from a physical model created with the structural design software. STAAD incorporates many design code standards.

nCode DesignLife is an online design tool that identifies key locations and calculates realistic fatigue life from leading finite element results for metals and composites. Designers can do more than simple stress analysis. They can simulate actual loading conditions and avoid costly design changes. Products can include functions for fatigue of welds and vibration fatigue, crack growth detection, fatigue in composites, and thermo-mechanical fatigue analysis. Advanced technology for multiaxial, vibration, crack growth and thermo-mechanical fatigue. A graphical interface that makes it easy to perform fatigue analysis using the most popular FEA results data such as ANSYS, Nastran and Altair OptiStruct. Multi-threaded and distributed processing capabilities to process large finite element models as well as complete usage schedules.

Simulating and analyzing your product design will reduce the cost of physical prototyping and increase your products' durability and reliability. It is crucial to your product development to use digital prototypes to understand the performance of your designs in real-world situations. Creo Simulation was designed exclusively for engineers. It includes structural, thermal and vibration analysis solutions, as well as a comprehensive set finite element analysis (FEA). You can validate and analyze the performance of 3D virtual prototypes with Creo Simulation before you even make the first part. We offer unique and flexible simulation solutions to our customers. This section will give you a better understanding of what we can do to meet your needs. Contact a Creo representative if you have any questions regarding our tool stack.

Your designs can be tested under real-world conditions to improve product quality and reduce prototyping and testing costs. SOLIDWORKS®, Simulation is a simple-to-use suite of structural analysis tools that uses Finite Element Analysis to predict a product’s real-world physical behavior. This can be done by virtually testing CAD models. The portfolio offers dynamic, static, and linear analysis capabilities. SOLIDWORKS Simulation Professional allows you to optimize your design, determine product mechanical resist, product durability, and test heat transfer instabilities and buckling instabilities. It can also perform multi-physics sequential simulations. SOLIDWORKS Simulator Premium allows you to efficiently evaluate your designs for dynamic response, nonlinear, and composite materials. SOLIDWORKS Simulation Premium offers three advanced studies: Nonlinear Dynamic, Linear Dynamics, and Non-Linear Static.

GENOA 3DP is a software suite that allows you to create additive manufacturing designs for metals, polymers and ceramics. It is a versatile tool that can simulate printing and offers seamless user interaction. GENOA 3DP is fast and easy to integrate into any process that allows for the best AM build. GENOA 3DP is based on progressive failure analysis and multi-scale material modelling. It allows engineers to accurately predict crack growth, void, residual stress, crack growth, and other anomalies that are associated with AM parts. GENOA 3DP bridges material science and finite elements analysis by providing a repeatable method to improve part quality, reduce scrap rates, and meet specifications.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

SPACE GASS is a 3D analysis and design program that can be used for multiple purposes. It is able to design beams, trusses, frames, buildings, towers and tanks, as well as cable structures and bridges. Capabilities include a 64-bit multi-core solver, silky smooth 3D rendered graphics, plate finite elements, frame elements, cable elements, tension/compression-only elements, moving loads and links to many CAD and building management programs. Why SPACE GASS? You can save time and money by choosing a safe and effective design. A silky smooth interface allows you to see your changes visually. A fast sparse matrix solver which fully exploits multi-core processors' parallel processing power. There are many structural modeling tools, analysis options, and design modules. Video tutorials that will guide you through the difficult stuff. For use in floating or stand-alone networks.

To analyze soil settlement, perform immediate settlement analysis. You can easily create soil profiles with RSLog, CPT boreholes and soil classification. Ground improvement methods such as soil replacement, vibrocompaction, and stone columns offer more flexibility. They can be applied to different stages at different depths. Sensitivity analysis can also be used to analyze settlement properties, such as stiffness, top and bottom depths, spacing, etc. You can perform CPT and liquefaction analysis together or separately. CPT analysis results can yield 29 different parameter results. You can calculate liquefaction based on either Cone Penetration Test or Standard Penetration Test data.

S-FRAME allows users to model, analyze, and design any structure, regardless of its geometry, material type, loading conditions or nonlinear effects. S-FRAME's automated frame generators quickly create models and import them with BIM or DXF import links. Users can also maximize productivity with integrated concrete/steel design tools that allow for design, optimization, code compliance and report generation. S-FRAME allows users to quickly create structures using modeling automation. They can generate regular framework structures and custom trusses. Users can also use clone tools for replicating a portion or all of the model. Importing existing BIM or DXF models can also help users save time. S-FRAME's advanced meshing tools create a finite element mesh. This allows users to generate detailed analysis results for their specific areas. These areas can be explored by users easily converting members into multi-shell models.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

Ansys Mechanical is a top-of-the-line finite element solver that can be used to improve your modeling. It has structural, thermal, acoustics and transient capabilities. Ansys Mechanical allows you to solve complex structural engineering issues and make faster design decisions. The suite includes finite element analysis (FEA), which allows you to automate and customize solutions for structural mechanics problems. You can also parameterize these solvers to analyze multiple design scenarios. Ansys Mechanical offers a wide range of analysis tools and is a dynamic tool. Ansys Mechanical provides a dynamic environment that allows you to connect additional physics and prepare geometry for analysis. Engineers of all levels can access the intuitive and customizable interface to quickly and easily find answers. Ansys Mechanical provides an integrated platform that uses finite elements analysis (FEA), for structural analysis.

Fatigue Essentials is a desktop program that can be used to efficiently perform structural fatigue analysis. Fatigue Essentials is a user-friendly program that allows you to conduct stress-life analyses using either classical stress calculations or linked to FEMAP™, and using the finite element-generated stresses. The program follows a tree structure to guide users through the analysis. The following load, material, and spectrum branches provide general options for analysis. There are options for input methods and variations within each branch. Analyses results can be viewed on-screen and used to create reports or damage contour plots in FEMAP. Covers most engineering requirements. Classic mode with user input stress. Professional mode (FEMAP-linked). This mode allows you to read nodal stress and push back results in damage contour plots. You can choose to either input stress and cycles interactively or file input.

Material usage optimization is the cornerstone of transformations that are currently taking place in the industry. Manufacturers are constantly pursuing lightweight and robust components in order to achieve cost-efficient production, with minimal warranties, minimal recalls, and accelerated timelines. Finite element analysis is used extensively in stress calculations for design. Many companies still use spreadsheets to perform fatigue analysis. This method is unreliable and time-consuming because it increases the chance of missing critical failure locations. fe-safe has been the leader in finite element software for fatigue analysis. Since the early 1990s, fe-safe's fatigue analysis software has been the benchmark in the industry. The fesafe software suite from FEA is a leading technology for durability analyses. It interfaces directly with all major FEA packages.

DesignCalc software offers a wide range of capabilities to users, as well as an embedded library industry data and proven methodologies that make ASME BPVC Section VII pressure vessel design compliance much easier than ever! Finite Element Analysis software (FEA), for quick and simple analysis. NozzlePRO is a powerful, fast 3-D FEA tool that models nozzles and saddles as well as pipe shoes and clips. Calculations that account for thickness or pressure can optimize your design. You can use the thinnest material available and still meet the code. Prepare industry-accepted reports that include the calculations used and are ready for inspection.

You can locate critical failure surfaces and calculate the safety factor using a combination global metaheuristic search methods with local surface-altering technologies. Results can now be generated in minutes with parallel processing for both failure searching as well as FS computations. Integrating 3D wireframes (representing geological surfaces, modeled faults and surveyed topography) can streamline your workflow and provide more detail. Directly into your 3D models. It is now easier and more efficient than ever to create slope stability models. Import surfaces from mine planning software or geological modeling. Or use built-in surface construction methods that use coordinates or borehole information. You can either build surfaces using point cloud data, or import block models from programs such as Vulcan, Deswik and Datamine.

GT STRUDL®, a structural engineering software, offers a complete solution. It includes 3D CAD modeling and 64 bit high-performance computation solvers in all versions. GT STRUDL has all the tools needed to analyze a wide range of structural engineering and finite elements analysis problems. It can do this accurately in a fraction the time it takes to use other structural design software. Structural design software is used by structural engineers to create safe and effective designs. It also helps them manage the complexity of many scenarios across a variety of industries, such as power, civil engineering and marine. GT STRUDL includes many quality features such as interoperability and structural analysis, database-driven designing, and quality assurance.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Ansys Sherlock, a reliability-physics-based electronic design tool, provides fast and accurate life predictions at the component and board levels for electronic hardware in early design stages. Ansys Sherlock automates the design analysis of electronic hardware. It provides accurate and fast life predictions at the component, board, and system levels during early design stages. Sherlock bypasses the 'test-fail-fix-repeat' cycle by empowering designers to accurately model silicon-metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. Sherlock quickly converts embedded libraries containing more than 500,000 parts into computational fluid dynamics and finite element analysis models. Each model includes accurate geometries, material characteristics, and stress information.

AxisVM's primary uses are in the design and construction of buildings and industrial and geotechnical structures. It is a powerful finite element solver, as well as practical modeling tools. This allows it to be used in bridge design and the design of composite structures, vehicles, and machines. There are optional design modules available for structures made from reinforced concrete, steel and timber, as well as masonry members and connections. AxisVM's special elements and analysis capabilities allow users to design innovative and custom structures. Reports can be created using drawings, tables, and detailed design calculations. Reports can be automatically updated, i.e. Reports are generated using the most recent model data and results.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.

Flexible and powerful preprocessor for high-quality finite element meshes. Attractive price - up to a factor of ten lower than their foreign counterparts. Calculation of strength under dynamic and static loading. Calculation of vibration modes and natural frequencies. Calculation of critical loads, buckling modes and critical loads. Calculations in 2D and 3D for volumetric, thin-walled, and bar structures. Elastoplastic deformation according the mises and Drucker-prager models. Calculation of strength for large displacements. Calculation of temperature, heat loss, and temperature deformations of parts or structures. Calculation of strength for highly elastic materials.

You can easily create complex concrete geometry, including single-level, ramps, or multi-story structures, using robust modeling tools and import from CAD/BIM software. Utilizing true 3D finite element analysis, load takedown and slab alignment, you can efficiently analyze slabs and entire structures for the combined effects gravity, lateral, or vibration loading. ADAPT-Builder lets you control all aspects of the design, including cracking, long term deflections and punching shear. This allows you to accurately and comprehensively examine an existing reinforced concrete slab. Whatever your concrete design requirements are, ADAPT software can help. Compare packages to get started. ADAPT Builder is the 3D modeling platform, analysis and design platform for ADAPTFloor Pro, Edge and MAT. Modeler can also be used in conjunction with ADAPTPT-PT or RC.

Eyeshot is a CAD control based upon the Microsoft NET Framework. It makes it easy for developers to add CAD functionality to WinForms or WPF applications. Eyeshot offers tools to build geometry from scratch, analyze it with finite element methods and generate toolpaths. Geometry can also exported or imported using CAD exchange formats. As never before, it is possible to combine multiple data sources, input devices, and CAD entity types. Import your data from file, from Visual Studio project resources, or from database. End-users can interact with each other using keyboard, mouse, 3D mice, fingers, and/or a combination of these. You can choose from Mesh, Solid, and Nurbs surface modeling technologies that will unleash your creativity. Eyeshot is the only 100%-NET CAD component available. It's easy to learn thanks to 60+ source codes (in C# and VB NET, and for both WinForms platforms and WPF platforms).

DEPRO is a comprehensive torque and drag program. This software can help reduce the risks associated with drilling and completion operations. DEPRO calculates the horizontal well's length based on specific friction factors. It also recommends rig specifications and determines the weight required to set a packer. DEPRO covers hydraulics. It includes surge and swab and equivalent circulation densities, bit optimization, hole cleansing, and volumetric displacements. DEPRO allows for the complete examination of downhole drilling hydraulic conditions and the identification of any potential problems before field execution. Stress calculation, torque, drag, and tension calculations. Models for both soft and stiff strings. Drilling, back reaming and rotation off the bottom are all possible. Prediction of sinusoidal and helical buckleling. Comparison of field data on surface torque and workload. Friction factor sensitivity analysis. Analysis of packer setting.

WellArchitect is an advanced well-planning and survey management system developed by Baker Hughes Company for integrated planning and drilling directional wellpaths, with or without earth model. WellArchitect was designed to accommodate sidetracking, multilateral wellpaths and re-entry drills. It is used by all levels of personnel in the industry, both at the office and the wellsite. This package includes trajectory calculations, target erosion based on positional uncertainty as well as reporting, plotting and 3D visualization. Wellpaths are able to be compared with earth models, reservoir models and more (above). Data used with the permission of the owner. This powerful directional software combines advanced 3D visualization tools with optional reservoir geo-data to create a major leap forward for the drilling sector. The software handles everything from planning, survey calculations, data management and collision risk analysis.

Engineers and researchers can use WELSIM finite-element analysis software to create prototype virtual products and conduct simulation studies.

Software for finite element analysis using CAD-embedded software. You can use a wider range of study types and materials to aid your analysis. Inventor®, Nastran®, provides finite element analysis tools for engineers and analysts. Simulation includes many types of analysis, including dynamics, heat transfer, linear and nonlinear stress and dynamics. Inventor Nastran can only be found in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection includes advanced simulation, 5-axis CAM and nesting tools, as well as AutoCAD and Fusion 360.

EarthVision, developed by Dynamic graphics, is a software that allows for the creation and updating of 3D models. It is easy to create accurate maps and cross-sections. Reservoir characterization and volumetric analysis can also be performed. EarthVision's advanced 3D/4D viewers allow for model examination and interrogation within the context of datasets throughout the asset development teams. This improves and simplifies quality control, well-planning, and communication with managers, investors, partners, or other team members. EarthVision's workflow management streamlines the model-building procedure, allowing for complex models to quickly and easily be built through a guided geologically oriented approach. The workflow manager's intuitive interface, which only requires one-time data input, guides users through modeling fluid contact, salt domes and faulted structures.

RokDoc is the culmination of over 20 years of industry experience and innovative research. RokDoc provides a seamless interface that integrates everything from data quality control and modeling and prediction. It also integrates multidisciplinary workflows for Quantitative Interpretation and Pore Pressure. Assess sandstone, carbonate, and shale reservoirs for improved hydrocarbon exploration and production optimization, CO2 sequestration and geothermal surveying. RokDoc offers a comprehensive and extensive library that includes rock physics, cutting-edge seismic inversion techniques, as well as a complete geomechanics solution. Automated and easy evaluation of geological "what-if" scenarios. To better understand the probability and success of subsurface resource exploitation, and stored fluid monitoring, capture uncertainty in data and models.

The Petrel platform can be used on-premise or in the DELFI cognitive E&P Environment. This allows geoscientists to analyze subsurface data, from exploration to production, and create a shared vision for the reservoir. This shared earth approach allows companies to standardize their E&P workflows and make better decisions by having a clear understanding both of the risks and opportunities. Integration at the data level allows for multi-discipline integration. This integration allows for the collection and preservation of knowledge from exploration to production - from the petroleum systems modeler to reservoir engineers and beyond - all contributing to a shared understanding of the subsurface. The Petrel platform facilitates multidisciplinary workflows, whether you are drilling in a shale field or drilling your first deepwater exploration well.

CONSELF allows you to use Computational Fluid Dynamics and Finite Element Analysis (FEA), which can be used to improve the design of your product: minimize drag and fluid dynamics losses; maximize heat exchange performances; estimate pressure loads; verify material resistance; evaluate components shape deformation; calculate natural frequencies, modes and other modes. Structural Mechanics can be performed dynamically or statically, using both elastic and non-elastic materials. You can also perform frequency and modal analyses starting from the most common CAD neutral file formats.

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

VSim is the Multiphysics Simulator Software that design engineers and researchers use to solve difficult problems. VSim's unique combination Finite-Difference Time Domain (FDTD), Particle in Cell (PIC) and Charged Fluid(Finite Volume), delivers accurate results in a variety situations, including plasma modelling. VSim is a parallel software program that can efficiently solve large scale problems. Simulations are run quickly using algorithms for high-performance computing systems. Trusted by researchers from 30 countries and used by engineers in a variety of industries, including aerospace and semiconductor manufacturing, VSim delivers results that are reliable. Tech-X's code was created by a group of computational scientists. VSim is available at many of the top research institutions around the world.

Thermal Desktop is a complete model creation tool. Objects such as finite element, lumped capacitance, and built-in finite differences can be combined in any way. Thermal-specific objects, such as insulation, heat loads and heaters, can be added to any model, from automotive components to manned satellites. Thermal Desktop allows full parameterization by using variables and arbitrarily complicated expressions instead of hardwired numbers. These variables, also known as symbols, enable models to be quickly manipulated by a few keystrokes. This makes it easy to update or maintain the model, perform sensitivity studies, and investigate what-if scenarios. This gives you access to SINDA/FLUINT’s optimization and reliability modules, as well as automatic model correlation.

RadCAD uses an ultra-fast Monte-Carlo ray-tracing algorithm that is accelerated by octa-trees to compute radiation exchange and view factors. C&R Technologies' innovations to the ray-tracing process resulted in a highly efficient thermal radiation software. RadCAD models diffuse or specular surfaces accurately, regardless of the density of nodes. The number of nodes is determined by the thermal solution, not by the accuracy requirements for the radiation. RadCAD uses user-defined databases for optical properties. Each surface coating defines absorptivity and transmissivity as well as reflectivity and specularity for both solar and infrared spectrum regimes. These properties can be defined in relation to incident angle, or even wavelength dependence.

DIGIMU®, on the other hand, generates digital microstructures polycrystalline that are representative of the material heterogeneities. (Compliance with topological characteristics of microstructure). The boundary conditions applied to REV are representative of those experienced by a material at the macroscale (thermomechanical cycles of the considered point). The simulation of the different physical phenomena that occur during metal forming is based on a Finite Elements formula (recrystallizations, grain growths, Zener pins due to second phase particles etc.). The software can provide a precise description of interfaces (grain boundary) and reduce computation time by using a suitable number of elements. This is possible thanks to an automated anisotropic remeshing and meshing adaptation technology.

CalculiX allows you to build, calculate and post-process Finite Element Models. The interactive 3D tool for the pre- and after-processor uses the openGL API. The solver can perform linear and nonlinear calculations. There are solutions for static, dynamic and thermal problems. Both programs can run independently. The solver uses the abaqus format for input, so it is possible to use pre-processors from commercial companies. The pre-processor can write mesh data for nastran abaqus ansys code-aster as well as the free-cfd-codes dolfyn duns ISAAC OpenFOAM. Included is a simple step reader. External CAD interfaces can also be used. The program can run on Unix platforms such as Linux and Irix but also on MS Windows.

VisualAnalysis is used by thousands of professionals to meet deadlines. Customers describe it as "a great value" with "so much ease of use". You need tools that are easy to use and affordable. 3D models of buildings, tanks, towers etc. Static and dynamic response analyses. Design code checks for wood, concrete, steel, cold-formed steel and aluminum. Includes complete analysis and design features, including automatic plate meshing and nonlinear elements. 3D static and Dynamic FEA for civil engineering, mechanical, aerospace, or any other structural analysis. Support for building code load combinations is optional.