Alternatives to MinePortal

Maptek BlastLogic, an all-in one solution, adds value to open cut operations by streamlining drill & blast design and tracking. It allows operations to make blasting decisions based on mine plans, geology and geotechnical information with instant data connectivity and visualization in the office or field. Flexible drill and blast systems designed to work in demanding production environments. Users can access data instantly and universally, which simplifies and accelerates routine tasks. Innovation in blast modeling, design, and analysis. All operational blast data centrally recorded. Interfaces with leading drilling navigation systems. Scalable business-wide solution. The best blast performance can be achieved by combining data sets from mine planning, drill guidance and field survey, as well as parameters for load design, post-blast evaluation, to create an intelligent blast design.

RS2 allows you to easily analyze stress/deformation and stability of any project, regardless of whether it is above ground or below ground. RS2's integrated Seepage Analysis Tool allows you to factor in groundwater flow for both steady-state and transient conditions. Automate your slope stability analysis using shear strength reduction. This performs a finite element analyze to determine the critical strength reduction factor. You can analyze embankments using slope stability, groundwater leakage, consolidation, or dynamic analysis. Groundwater and dynamic analysis tools are available in RS2. There is also a large library of advanced constitutive models that can be used to capture the sudden loss in strength caused by liquefaction. This tool is suitable for both underground and open-pit excavations. It can analyze stability, stress/deformation and bench design. It also supports the design and support of underground caverns.

We are streamlining the collection of geotechnical data for ground control engineers, geotechnical engineering and geologist. Our platform allows engineers and geologists the ability to collect 3D point cloud data and then convert it into useful geological measurements. It can be dangerous and time-consuming to take measurements in a mine. Our tool is designed to make it safer and more efficient to get the information you need to run your mining operations. Our handheld and mobile mapping technology automatically calculates joint set orientations for rock masses using flash LiDAR and our software platform. We also offer an intuitive platform to document RMR, Q, as well as other geological measurements. In minutes, engineers and geologists can get highly accurate and consistent data. Our team is determined to create an industrial product that doubles up as an intelligent, simple, and practical device that adds unprecedented value for the mining industry.

A scalable, innovative data management infrastructure that improves collaboration, security and efficiency. The advanced, architecturally lightweight data management infrastructure can be scaled to multiple users and project. A centralized repository can be customized to meet the highest security standards, and it can be customized according to role-defined permissions. Teams from the seismic, petrophysics and geologic modeling fields can collaborate and interact within a common visualization environment with real-time data workflows. Import/export software with a variety of data formats allows exchange with the OSDU Data Platform as well as with third-party repositories. Teams of seismic, petrophysics and geologic modelers can share data and work in real-time. Common data models, services, interfaces and visualization platforms. Scalability is easy to adjust for changing performance needs and storage requirements as datasets grow.

The advent of digital transformation via the cloud has provided an opportunity to create a new generation operations geology software that will improve collaboration and productivity. GravitasEDGE was built using the most recent technology. Users have access to a rich operations geology toolset to manage the geological workflow. It seamlessly integrates with other disciplines like drilling and asset geoscience. Winlog, EZ Correlate, PoreView, and Reporter, all world-class applications, are available for log visualization and analysis, well correlation, pore pressure monitoring, and daily and end-of-well reporting. The GravitasEDGE mobile app has been designed for smartphones and tablets. It allows users to view charts, reports, and other information on any device at any time, from anywhere.

EarthVision, developed by Dynamic graphics, is a software that allows for the creation and updating of 3D models. It is easy to create accurate maps and cross-sections. Reservoir characterization and volumetric analysis can also be performed. EarthVision's advanced 3D/4D viewers allow for model examination and interrogation within the context of datasets throughout the asset development teams. This improves and simplifies quality control, well-planning, and communication with managers, investors, partners, or other team members. EarthVision's workflow management streamlines the model-building procedure, allowing for complex models to quickly and easily be built through a guided geologically oriented approach. The workflow manager's intuitive interface, which only requires one-time data input, guides users through modeling fluid contact, salt domes and faulted structures.

DEPRO is a comprehensive torque and drag program. This software can help reduce the risks associated with drilling and completion operations. DEPRO calculates the horizontal well's length based on specific friction factors. It also recommends rig specifications and determines the weight required to set a packer. DEPRO covers hydraulics. It includes surge and swab and equivalent circulation densities, bit optimization, hole cleansing, and volumetric displacements. DEPRO allows for the complete examination of downhole drilling hydraulic conditions and the identification of any potential problems before field execution. Stress calculation, torque, drag, and tension calculations. Models for both soft and stiff strings. Drilling, back reaming and rotation off the bottom are all possible. Prediction of sinusoidal and helical buckleling. Comparison of field data on surface torque and workload. Friction factor sensitivity analysis. Analysis of packer setting.

It is not always possible or practical for spatial phenomena to be predicted and modelled using real-world observations. ArcGIS Geostatistical Analyst allows you to generate optimal surfaces using sample data and make predictions for better decision-making. These tools are particularly useful for atmospheric data analysis and petroleum and mining exploration, precision agriculture, environmental analysis, and fish and wild life studies. ArcGIS Geostatistical Analyzer extension provides a suite interactive tools that allow you to visually examine your data before it is analysed. ArcGIS Geostatistical Analyst can help you quantify uncertainties if your data is incomplete or subject to errors. To perform risk analysis, create multiple versions of the same surface. Geostatistical simulation creates multiple surfaces that simulate the real phenomenon and give possible values.

GIM Suite allows for seamless integration across desktops, webs, and mobile devices. It allows you to capture, manage, and deliver geoscientific observations and measures in any environment. GIM Suite's powerful data management capabilities increase confidence in decision-making throughout the mining value chain. You are always working from one source of truth for your most valuable assets, your geological data. More data is being collected and used by miners than ever before. Companies have access to more complex deposits through smart mining techniques and practices. Your geological data is part a larger mining ecosystem and can be used to inform optimizations elsewhere if properly integrated. One trusted version of your data is accessible across all teams. This allows everyone to work with the same information.

Managed Pressure Drilling, including Underbalanced Drilling, (MPD), precisely controls the annular fluid pressure profile in a wellbore. This allows drilling of economically feasible prospects that might otherwise be unattainable. Management of pressure drilling is often done with the primary goal of reducing formation damage. The drilling process is often characterized by increased production and aerated fluid. Managed pressure drilling is used in hard rock applications to increase ROP (rates of penetration). Air/mist drilling fluids are often used. UBDPRO models complex hydraulics for compressible liquids, including air, mist and foam, as well as 2-phase fluids. This advanced software model can be used for optimizing liquid and gas injection rates to control bottomhole pressure.

You can locate critical failure surfaces and calculate the safety factor using a combination global metaheuristic search methods with local surface-altering technologies. Results can now be generated in minutes with parallel processing for both failure searching as well as FS computations. Integrating 3D wireframes (representing geological surfaces, modeled faults and surveyed topography) can streamline your workflow and provide more detail. Directly into your 3D models. It is now easier and more efficient than ever to create slope stability models. Import surfaces from mine planning software or geological modeling. Or use built-in surface construction methods that use coordinates or borehole information. You can either build surfaces using point cloud data, or import block models from programs such as Vulcan, Deswik and Datamine.

MineScape was specifically designed to meet the stringent requirements of the mining industry. It is used in more than 200 complex mining operations, including nickel phosphate mining (Russia) and coal mining (Indonesia). It provides integrated solutions for underground and open-cut mining operations for coal and other metalliferous resources. MineScape is a world-class mine planning tool that offers extensive geological modeling and mine design functionality. GDB stores downhole survey data, lithology, quality data, and produces custom, summary, and user-definable reports. It allows geologists to perform correlations, composition, washability calculations, and classic 2D geostatistical analyses.

MiVu™, a software package, is designed to perform microseismic analysis during hydraulic fracturing. It can be used for both surface and downhole geophone arrays. MiVu™, which can be used to build simple and complex geologic models interactively and to design optimal microseismic monitoring geometries, process data with user-defined workflows and image event locations using multiple techniques. It also allows you to visualize and interpret microseismic events 3D. Multiple event location methods are available, including cross double difference, 3D grid search, 3D migrating, and 3D grid search. This allows you to see how different geophysical methods affect the location of the microseismic events. It will help you to understand the strengths and weaknesses of each method.

RokDoc is the culmination of over 20 years of industry experience and innovative research. RokDoc provides a seamless interface that integrates everything from data quality control and modeling and prediction. It also integrates multidisciplinary workflows for Quantitative Interpretation and Pore Pressure. Assess sandstone, carbonate, and shale reservoirs for improved hydrocarbon exploration and production optimization, CO2 sequestration and geothermal surveying. RokDoc offers a comprehensive and extensive library that includes rock physics, cutting-edge seismic inversion techniques, as well as a complete geomechanics solution. Automated and easy evaluation of geological "what-if" scenarios. To better understand the probability and success of subsurface resource exploitation, and stored fluid monitoring, capture uncertainty in data and models.

This makes it easier for engineers, geoscientists and drillers to collaborate. Your software doesn't have to be complicated, even though the world of oil & gas is becoming more complex. Kingdom™, which integrates geoscience, engineering, and geophysics, makes it easy for asset teams to make faster decisions, from exploration to completion. Our solutions are simplified, giving you access to advanced geoscience/scientific tools that are affordable, easy to learn and install and come with excellent support and training. Kingdom is optimized for unconventional, conventional, and deepwater plays. It allows you to assess the potential of regional geologic trends or find out where assets are underperforming. All this in a single, cost-effective, and easy-to-learn environment. Kingdom Geosteering will get you to the zone 95% of all the time. Collaboration increases productivity in geology and allows for better predictions.

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

Multi-survey structural interpretation and visualization is fast and easy. Multiple users can collaborate in one shared environment. Integrated analysis of multi-scale geophysical, seismic and geological data allows for reliable prediction of facies from well data. Comprehensive, integrated solution for seismic interpretation that includes industry-leading facies classifications and volume visualization workflows. Visual integration and interpretation at all scales, from regional to prospect. You can easily share data and projects with other members of your team without duplication. Interactivity and consistency among views speed up the interpretation process. This makes full use of high-speed graphics and large memory, as well as the fast connectivity of modern workstations. The user interface is intuitive and easy to use.

Maptek Vulcan is the world's leading 3D mining software. It allows users to validate technical data and transform it into dynamic 3D mine models, accurate designs and operating plans. When developing long-term or daily mine plans, it is important to know when and where to mine. The Vulcan 3D Visualisation Environment helps better understand mining project, with interpretations of results and decision support for profitable and productive mining operations. Vulcan is able to manage and visualise large and complex datasets. It can also process the data and quickly generate models. The sophisticated algorithms allow for virtually instant validation of the models, allowing users a continuous picture of a deposit.

OCPS is completely script-free and was specifically designed to address the challenges of open-cut phosphate mining. It is composed of predefined logic that, when combined with the expertise of mining engineers, determines what is feasible across multiple mining operations. Engineers are able to react quickly to market changes and maximize output, which in turn creates shareholder value. OCPS is the only Enterprise Planning software that conforms to industry standards and aligns with ISA-95. This allows for true collaboration across the entire mining value chain. You can simultaneously schedule mining and dumping so you know the source/destination of each step.

You can create your own analysis graphs using a drag-and drop format. Choose from a variety of data types, displacements, coordinates and vectors. Additional information like site voltage is also available. You can change the data reference values, date ranges, and filter your data-set with filters like 24h averaging. For simplified reporting, design your analysis graphs. Then add them to your dashboard. Heat Mapping - Choose any data type you wish to display, adjust the time range, and then display the movement as a heat map. You can adjust the scale and weighting of heat mapping colors to meet your reporting needs. For quick site reference, overlay project imagery below your heat maps. To cross-reference data from multiple systems, you can integrate any number of prisms and types of sensors.

The increased use of extended-reach, directional wells means that tubulars are subject to more torque and drag (T&D). This can lead to pipe failures, stuck pipes, and expensive fishing jobs if the torque and drag are not assessed. TADPRO, the most comprehensive torque-drag software on the market, eliminates many of the hazards of a drilling program or completion design. You can set limits on the horizontal length based upon specific friction factors. It is also possible to evaluate the ability to transfer the required weight to a liner top packer. It is possible to predict the torque and hookload of rig equipment by analyzing forces downhole. TADPRO is a user-friendly software that produces the best graphical outputs and flexibility in the industry. Advanced features make the software extremely user-friendly and allow for easy interpretation of results.

Surface and underground mine operations benefit from dedicated workflows and reporting features that improve efficiency and productivity. With intuitive point cloud processing, you can get a clear picture of your project's status. Process and combine the point cloud data from Maptek's laser scanners, UAVs and other lidar sensors to create easy-to understand deliverables. Measure stockpile volume with ease, update survey models at the end of each month with new field data and analyze geotechnical risk that could impact your operation's safety. PointStudio gives you the tools to accurately quantify and communicate conformance with design. PointStudio can be delivered on the Maptek Workbench to ensure interoperability with all Maptek solutions. Users can easily create workflows to automate site processes and standardize them. Custom toolbars and menus can be easily configured to suit individual work patterns, standardize processes across sites and operations, and adapt workflows.

To analyze soil settlement, perform immediate settlement analysis. You can easily create soil profiles with RSLog, CPT boreholes and soil classification. Ground improvement methods such as soil replacement, vibrocompaction, and stone columns offer more flexibility. They can be applied to different stages at different depths. Sensitivity analysis can also be used to analyze settlement properties, such as stiffness, top and bottom depths, spacing, etc. You can perform CPT and liquefaction analysis together or separately. CPT analysis results can yield 29 different parameter results. You can calculate liquefaction based on either Cone Penetration Test or Standard Penetration Test data.

Genesis Campaign Builder is a powerful software tool that allows you to statistically estimate the time it will take to execute a well-planned campaign. It can also be used to estimate campaigns that include several wells. You can plan well campaigns over multiple years and then monitor their performance later. Genesis' product provides insight into operational performance and benchmarking throughout the entire cycle of front-end loading. It also tracks several KPIs to keep managers and operations teams informed. It provides companies with a method to analyze results. They can also use historical data and statistical analysis to plan for future wells. Campaign Builder allows companies to create a multi-well development plan for a field. Campaign Builder can be used to generate the campaign in the early stages of design. This allows companies to identify potential risks and costs in developing the fields.

DecisionSpace®, 365 Essentials is an industry-leading exploration and production (E&P), which provides the best performance at a reasonable price to help you run your business. This software is flexible and you only pay for what you use. Advanced seismic processing technology and QC workflows allow you to gain a detailed and insightful understanding of subsurface. Optimize your well operations to increase productivity Start without any data entry or report configuration. You can jump start your economics evaluations by having instant access whenever and wherever you need it. Self-service well construction software that reduces well preparation time, increases reliability, and maximizes well productivity.

Maptek creates easy-to-use, smart software for mining, aggregates, and civil engineering applications. PointModeller is the latest solution for processing point clouds collected by drones or other sensors. PointModeller converts drone or other lightweight mobile sensor point clouds into deliverables that are suitable for civil, topographic and quarry operations. PointModeller converts your 3D point cloud into deliverables using powerful 3D visualization tools, smart filters, and interactive manipulation. Powerful, intuitive tools help manage stockpile inventories through accurate volumetrics. They also create topographic or 3-D surfaces and track digging compliance. PointModeller can help you increase your productivity and optimize workflows in civil, topographical, or quarrying applications. A cost-effective subscription package that provides decision support for drone or mobile sensor users.

Advanced velocity determination and 3D/2D model building allow for accurate, high-quality and interpretable seismic images in depth and time. An integrated suite of interactive and batch velocity analysis tools allows you to easily solve all kinds of seismic imaging problems. The workflow is simplified by integration with interpretation and modeling tools. Data loss is prevented and geologic constraints are respected. No matter how complex the structural geology, it is easy to create 3D and 2-D models. Highly parallelized to run efficiently on large 3D datasets as well as multi-line 2D datasets. Hydrocarbon exploration and production requires accurate seismic images and depth models. Aspen GeoDepth velocity calculation and modeling system provides a solution to improve seismic imaging in depth or time. It integrates interpretation, velocity analysis, model construction, time-to-depth conversion, and more.

Maptek GeologyCore streamlines geology workflows from importing and validating data to defining geological areas, and generating accurate, reliable geological models. The smart workflow automates daily tasks from data preparation to the published model, giving geologists more time to concentrate on higher-value work. The processes are intuitively grouped to import and validate drillhole data. Domains are defined before generating geological models and publishing them. Repeatable steps make it easy to experiment, and changes made to domains are immediately reflected on the model. GeologyCore can be used for a variety of projects. It offers a machine-learning option that is cloud-based, alongside traditional modeling methods like vein and implicit modeling.

OreSense®, Platforms is Plotlogic’s collection of algorithms and API's that allow you to interface with your geological models as well as end users. OreSense®, Platforms allow mine planners, supervisors and geologists to choose how data should be integrated into their workflows. OreSense®, which captures new information from all levels of the value chain, can be used to update the relevant parts or flow of the block model. Our APIs can also be integrated with your existing scheduling tools to give you greater transparency on process variations as they happen. Platforms enable you to monitor the mining process more effectively by generating actionable reports. Data collected and analysed in real-time for your decision support system (DSS).

PaleoScan is a seismic interpretation software based on a semi-automated approach that produces chrono-stratigraphically consistent geological models. This unique technology was patented in 2009. It allows our clients' seismic interpretation cycles to be accelerated, to scan the subsurface real-time to identify high-potential zones, and to identify hydrocarbon storage or accumulation areas. PaleoScan's ability to create a 3D geological cube of the entire seismic data allows for the visualization and interpretation, as well as the subsurface layers, up to the seabed. This is important in establishing a reliable ranking, taking into account the risks associated with gas injection, of storage reservoirs. Our revolutionary technology, which combines powerful algorithms, computing power, and data analyses, takes your seismic interpretation to a new level.

Galaxy4D is a 2D/3D modeler and stratigraphic tool that provides reservoir engineers and geologists with a powerful and flexible tool. It greatly reduces the time required to build, update and manage reservoir models. It also increases knowledge and understanding of the reservoir. Field development programs can be developed faster and with fewer risks. Galaxy4D's strengths are in its simple and logical workflow. Its modules and displays are easy to use, interactive, and efficient. Galaxy4D can estimate saturation distribution using logs (RSTs). You can create unified catalogs that include reservoir descriptions, engineering, geophysical, seismic, and other data. Analyze the histograms for reservoir properties for single wells or multiple wells for 2D or 3D data sets on a zone-by-zone or defined area basis.

Use streamlined workflows to change the way you view and work with data. Quickly generate cross sections and use tools to integrate your models with engineering plans. Rapid creation and updating geological models will increase the productivity of your subsurface 3D modelling. Your models and outputs, such as cross sections, are automatically updated when new data is added. This saves both time and money. 3D subsurface modeling offers unparalleled accuracy and efficiency when it comes to understanding ground conditions. You can identify and assess risks earlier in the project's lifecycle. Subsurface insights in 3D bring clarity to complex data and give you a better understanding. Visual 3D subsurface models are more effective in helping you understand ground conditions.

OMNI 3D seismic design software allows you to create optimal 2D or 3D designs for land and marine, ocean-bottom cable, transition zone, vertical seismic profile, and multicomponent surveys. Advanced analysis modules allow you to analyze geometry artifacts, examine geometry effects, generate synthetics, build and ray trace 2D or 3D geological models, and more. OMNI 3D software bridges the gap between E&P asset teams and acquisition teams with its advanced tools, easy-to-use interface and multiproject handling. These features make OMNI 3D software a standard in the industry for geoscientists involved with survey planning, design and QC. Advanced analysis modules include synthetics, 3D geometry assessments, trace quality estimations using 5D interpretation, AVO Response, illumination on a subsurface horizontal using any survey geometry and post-stack time migration illumination via Fresnelzone binning

Geophysics by SeisWare provides all the tools necessary to interpret seismic plays, both conventional and non-conventional, in one comprehensive package. Large projects can be shared among asset team members and are fully scalable. The interface is simple and easy to use, so you can focus on your results and not on fighting your software. Our comprehensive geoscience package now includes Geophysics by SeisWare. Are you looking to get a complete geoscience solution that can do seismic interpretation, synthetic generation, petrophysical calculations, and launch a cross-section in multiple windows at once? SeisWare Geoscience 64-bit, high-performance software allows you to double your data with no additional time. SeisWare Geoscience can be used for both geologic and seismic interpretation.

Geomage, a global company, develops and provides advanced technologies for seismic processing and interpretation. It also offers services and software to a wide range of oil and natural gas companies. Geomage's seismic-processing portfolio is based upon the innovative MultiFocusing™ technology. This has been used for hundreds of exploration sites across the globe to provide the most accurate imaging and better structural and stratigraphic detail of the subsurface. The g-Viewer is a tool that allows the visualization and selection of seismic datasets on a 3D scene. The view is available as a commercial version, and allows for the plotting of 2D sections and volumes.

Geology by SeisWare allows for efficient geological workflows. It is an intuitive and fast interpretation tool. Our Petrophysical Calculator is a favorite with clients. You can create and customize calculations such as net pay, assign zones attributes, and many more! We are experts and we build our software with your guidance. Our software has been shaped by user feedback and client focus groups. Our software packages are compatible so your team can use them together! Geophysics by SeisWare is fully integrated with Geology for seamless data integration. This allows for fast results and no need to import or export data. Our software must keep up with your plans. Geology by SeisWare works intuitively and is responsive. You will be amazed at how fast you can run! You can run multiple calculations in sequence using a variety inputs such as log curves, log curvases, zone attributes and previous outputs. Perform aggregate functions like summations and averages of data.

In-depth intelligence and analysis are required for mining operations, both in the exploration and operational phases. Bore hole drilling and analysis of samples are required to evaluate mineral deposits. Our technology platform can be used to detect changes in underground structures and the emergence air gaps during the operational phase of extracting minerals deposits. This allows mining companies to monitor these changes and prevent tunnel collapses. Mining companies can use the mDetect technology platform to help them identify. Impact of new structures, underground channels, and tunnels on existing subterranean structure.

Comprehensive seismic processing and QC software to process data acquired on-shore, offshore, or in a vertical seismic profile. VISTA desktop seismic processing software allows data processing from the early stages of acquisition QC to the final processing and interpretation 2D and 3-D seismic data acquired either onshore or on land. It also supports vertical seismic profiles (VSP) in all industry data formats. VISTA software makes it easy to navigate workflows and evaluate datasets with the interlinked and interactive displays. You can also add your own algorithms via the MATLAB SDK or C++ interface. Advanced processing capabilities are supported by the software, including AVO and angle analysis (AVA), multicomponent processing, 2D and 3D VSP processing, and AVO and angle of incidence analysis (AVA). Advanced field package, including full geometry QC and post-stack migration. The complete solution, including QC, prestack migration and time depth image analysis.

Canesis Data offers explorationists cost-effective access and a vast and growing collection of seismic and well data from around the world. Canesis Data has one of the largest collections of non-proprietary legacy information available. Data is sourced from industry sources and the public domain. It is then conditioned and made available for general sale. Many datasets can be scanned and vectorized. Other datasets, where indicated, are original numbers data. We have a long history and can bring a wealth knowledge and experience to bear on the many challenges associated with the restoration of legacy data. This data can sometimes be damaged, disfigured, or fragile. Canesis processes public-domain and released data on its behalf. Canesis also participates in multi-client situations, such as open licensing round. The data can be sold (to the appropriate qualified companies in the licensing rounds), and is processed to the same standards that proprietary service work.

GEOVIA Surpac™, the most popular geology/mine planning software in the world, supports open-pit and underground operations, and explore projects in over 120 countries. The software is easy-to-use, has powerful 3D graphics, and workflow automation that can be adapted to specific company processes and data flows. It delivers efficiency and accuracy. Surpac meets all the needs of surveyors and geologists in the resource sector. It is flexible enough that it can be used for any commodity, orebody, and mining method. Multilingual capabilities enable global companies to share a common solution across all their operations.

There are many reasons why a pipe might become stuck. These causes are usually related to mechanical sticking or differential sticking. Key seating, undergauge holes, wellbore instability and poor hole cleaning can all lead to mechanical sticking. Differential sticking is caused by high-contact forces due to low reservoir pressures or high wellbore pressures. Stuck pipe problems are the most costly drilling problem facing the petroleum industry. The cost of correcting them can run into the millions. It is becoming more important to analyze well data to predict the stuck chance for a drill string.

It takes a lot of work to gather your data. Do not settle for substandard visualization. Surfer's powerful modeling tools allow you to present your data in the best possible way while maintaining precision and accuracy. Surfer makes it easy to communicate information about geology, hydrology and environmental. Surfer's many analysis tools are designed for engineers, geologists, and researchers. They allow you to discover the depths of your data. Adjust gridding and interpolation parameters, assess spatial continuity of data using variograms, determine faults and breaklines, and perform grid calculations such volume, smoothing, filtering, and transformations. Surfer converts your data quickly into knowledge.

Analyzing the strength characteristics and constitutive behavior of your rock and soil materials will help you to fully understand them. This will allow you to establish strength envelopes and other material parameters. To get a deeper look at the stress-strain relationship between your soil materials, you can use constitutive models such as Modified Cam Clay and NorSand. RSData also includes RocProp, a database that contains intact rock properties. This application can be used as a standalone application. You can see the complete list of technical features within RSData. Compare the results of field and laboratory tests to determine your rock's strength criteria. RSData can import laboratory tests and stress-strain pathways of soils for visualization. You can compare and calibrate material parameters by overlaying experimental data with predicted constitutive behavior. Different constitutive models are used to predict typical laboratory tests.

Every project is difficult, but the geotechnical analysis does not have to be. PLAXIS 2D offers fast computations. Advanced finite element and limit equilibrium analysis of rock and soil deformation and stability. Also, soil structure interaction, groundwater and heat flow. PLAXIS 2D, a powerful and easy-to-use finite-element software for 2D analysis and stability in geotechnical and rock mechanics, is available. PLAXIS is used by the top engineering firms and institutions in civil and geotechnical engineering. PLAXIS 2D can be used for many applications, including excavations, foundations, embankments, and foundations, as well as tunneling, mining and oil and gas extraction. PLAXIS 2D provides all the necessary tools to perform safety analysis and deformation of soil and rock. It does not need to take into account creep, steady-state groundwater, thermal flow, consolidation analysis or any other time-dependent effects.

Pandell LandWorks, a cloud-based land asset management tool, is the core of our powerful land software suite. Pandell LandWorks uses interactive displays to show your holdings. Quick inspector panel access gives you an overview of your land information. You can view representations of your mineral assets and surface areas. You can choose from standard reports, or filter and save any search criteria to create custom Excel exports. Pandell LandWorks smart Grid queries offer flexible reporting tools that allow for detailed analysis and decision-making. Intelligent data processing workflows reduce errors and redundant data entry with time-saving shortcuts. Granular data tracking provides more detailed acreage histories, and Pandell LandWorks can create your own chain for you.

Advanced seismic processing and imaging can condition data for depth imaging and interpretation. Companies can configure the system to meet their business objectives and user needs through modular design, open architecture, and compliance to standards. The most advanced seismic processing and imaging solutions available, including SRMA and 5D interpolation and Aspen Echos RTM. A library of over 350 modules that allows the construction of data-dependent processing workflows to solve current geophysical challenges. The industry's best interactive link between data, seismic applications, and parameters. Aspen Echos is the standard seismic processing system in the oil and gas industry for producing 2D and 3-D seismic images of subsurface.

Compare the tool responses of different vendors against your reservoir geology to determine the best tool and resistivity curves. To create high-accuracy final Inversions, integrate all memory data. For fast results, deploy the inversion module on High Performance Computing devices (HPC). To prevent the target zone from exiting and to keep the reservoir in place, calculate the distance to the bed boundary in real time. You can create phase shift and attenuation curves using non-azimuthal instruments, interval length, and parameters for 2-layer boundary mapping in real time. To predict a tool’s log response in advance, you can build an earth model of the formations that you are drilling. This will allow you to easily model resistivity effects such as shoulder effects, polarization Horns, and anisotropy.

Quick and easy stability analysis of underground crown pillars or surface roofs using three different limit equilibrium analysis methods: elastic plate, rigid plate, and Voussoir plate analysis. Probabilistic analysis is used to determine the likelihood of failure. By assigning statistical distributions of variables, you can model variability in geometry, point force application, joint strength, bedding strength, water pressure, and external loads. To evaluate the impact of changing model parameters on safety factor, perform sensitivity analysis with a range of values. This method was originally designed for steeply dipping ore bodies. By estimating crown geometry, and assessing stope geometry as shallow or steep, you can apply the best empirical relationships to your model.

Over 30 years of setting the standard for geophysics modeling All raw data, geochemistry, geophysics, and geophysics can be viewed, QA/QC'ed, transformed, and analyzed with powerful 2D/3D modeling capabilities. You can quickly assess large data sets and run multiple filters to test them. Coordinate projection in real-time allows you to spatially align all data. You can import, overlay, and use more than 50 formats, including CAD, GIS, mine planning, and modeling. You can import data directly from many online geoscience repositories. Combine geoscience data to create a complete model. Files can be easily shared with teams that work in different formats. You can create your own processes using the Oasis montaj API. Each project is unique. Automate repetitive and difficult data processing tasks. You can streamline team workflows and save time so you can concentrate on generating insights. You can also add specific tools and workflows to access the geoscience data that you require.

No matter if you are drilling a vertical well or an extended-reach one, a low or high equivalent circulating density (ECD), can cause serious drilling problems and compromise your project's finances. An optimal ECD is essential for a successful drilling operation. It is essential to accurately model the drilling process and optimize the drilling hydraulics. It allows engineers to plan ahead, improving drilling efficiency, reducing risk, decreasing non-productive times (NPT), and so on. Pegasus Vertex's HYDPRO hydraulics model covers all aspects of hydraulics including surge and swab and bit optimization, hole cleaning and volumetric displacements. These features allow downhole drilling hydraulic conditions to be thoroughly examined, and any potential problems identified before field execution.