Alternatives to Kinemetrics PSD

SOFTWARE PLATFORM FOR ROCK+, ROCK, ALTUS AND Q330 FAMILY OF PRODUCTS Rockhound, originally introduced as SMARTS, is a software platform designed to implement real time data acquisition solutions from streams of one or more digitizers and perform vital functions on the data that are critical to the end user.The platform is modular as a building block structure where each module within specific implementation may be connected in many useful and different ways. The Rockhound software platform was developed in Java and can be used on a variety operating systems, including Microsoft Windows, multiple Mac OSs, and Linux. An optional Software Development Kit is also available that allows users create custom Rockhound modules to integrate with existing modules from Kinemetrics. The optional kit allows users to create custom post processing, data storage and notification functions.

Evaluation of a variety of QC attributes in arbitrary Windows, as well their derived combinations. Interactive common source/common receiver/CMP attribut map, CMP fold map and location map for advanced analysis of data quality - all maps are fully synchronized among them and with seismic display, active templates are highlighted along with SP and RP of the current trace. Real-time QC--control data quality immediately after it is acquired. This allows you to make decisions and fix problems instantly. A complete set of industry-standard algorithms are available for data processing, including vibroseis correlation and trace editing, bandpass and FK filtering and Radon, FXY and FXY decons. TFD noise corrections, deconvolutions and amplitude corrections can all be done. Interactive velocity analysis, statics and NMO-correction can also be used. Regularization, stacking, prestack and after-stack time migrations can also be done.

Multisensor GeoStreamer is the ideal platform to perform broadband imaging. Deep towing reduces weather impacts and improves acquisition efficiency. The recorded signal is not sensitive to changes in towing depth or local sea surface variations. This significantly reduces non-repeatable noise in reservoir monitoring projects. Pre-stack phase and amplitude are consistent in a frequency-dependent and angle-dependent way. Rich low-frequency signals enhance Full Waveform Inversion and improve subsurface property prediction accuracy. Multisensor wavefield separation allows for better shallow illumination. For standalone interpretation, near-surface images can be used that are not affected by acquisition footprint effects. Enhanced broadband resolution stratigraphy allows for the recovery of small time shifts due to changes in reservoir pressure and saturation during reservoir monitoring projects. GeoStreamer employs both velocity sensors and hydrophones to remove any ghost reflections from the surface.

Quick and easy stability analysis of underground crown pillars or surface roofs using three different limit equilibrium analysis methods: elastic plate, rigid plate, and Voussoir plate analysis. Probabilistic analysis is used to determine the likelihood of failure. By assigning statistical distributions of variables, you can model variability in geometry, point force application, joint strength, bedding strength, water pressure, and external loads. To evaluate the impact of changing model parameters on safety factor, perform sensitivity analysis with a range of values. This method was originally designed for steeply dipping ore bodies. By estimating crown geometry, and assessing stope geometry as shallow or steep, you can apply the best empirical relationships to your model.

Comprehensive software package for near-surface seismological methods. Easily process reflection data with one application, including multi-step redo and undo. All records from a survey line can be imported at once. Use layout charts to efficiently assign geometry. CMP binning is used to correct crooked lines. AGC, trace balance, time-variant scaling, and AGC. F-K filtering, frequency filtering, Tau-p mapping. Predictive and spiking deconvolution. Random noise attenuation Muting of surgical, top, or bottom trace. Gather sorting (CMP), common shot, common receiver or common offset) Velocity analysis of CMP or common shot gathers. NMO correction and inverted NMO correction. This application is rich in features and can be used to process single-fold seismic reflection data or GPR data. Assign geometry in reverse or forward trace order. Support for SEG-2, SEG-Y, SEG-D, ASCIII, MALA and ImpulseRadar data formats. Static correction for elevation and first-arrival alignment. AGC, trace balance, time-variant scaling.

This software package includes crosshole survey design and model building and modeling, data transformation, CDP transformations, tomography, wave equation migration and post-processing. It provides all the capabilities you need to complete a crosshole seismic project. The model includes P- and A-wave velocities and densities as well as anisotropic parameters. Create an arbitrary velocity model with layers, objects, faults, and other elements. Full wavefield simulation using an anisotropic finite difference method.

It takes a lot of work to gather your data. Do not settle for substandard visualization. Surfer's powerful modeling tools allow you to present your data in the best possible way while maintaining precision and accuracy. Surfer makes it easy to communicate information about geology, hydrology and environmental. Surfer's many analysis tools are designed for engineers, geologists, and researchers. They allow you to discover the depths of your data. Adjust gridding and interpolation parameters, assess spatial continuity of data using variograms, determine faults and breaklines, and perform grid calculations such volume, smoothing, filtering, and transformations. Surfer converts your data quickly into knowledge.

The suite includes utilities that allow output files to be prepared for loading into a seismic interpretation workstation and further processing. LEAMAP can be used either as a standalone program or integrated with LEASSV to provide a complete solution for reconstructing seismic data using images of sections and basemaps. A minimum system requirement is a computer running Microsoft Windows XP or Vista, 7, 8, or 10 (x86, x64). Snowbound Software Inc supports more than 60 raster file formats via its raster library. Standard Windows printer drivers support plotting. Locprep is an interactive editor that can be used to edit Lynx or UKOOA-type location files. These files store information about seismic shotpoint locations and general location information. Locprep can be used to perform many tasks with LOC files.

Maptek BlastLogic, an all-in one solution, adds value to open cut operations by streamlining drill & blast design and tracking. It allows operations to make blasting decisions based on mine plans, geology and geotechnical information with instant data connectivity and visualization in the office or field. Flexible drill and blast systems designed to work in demanding production environments. Users can access data instantly and universally, which simplifies and accelerates routine tasks. Innovation in blast modeling, design, and analysis. All operational blast data centrally recorded. Interfaces with leading drilling navigation systems. Scalable business-wide solution. The best blast performance can be achieved by combining data sets from mine planning, drill guidance and field survey, as well as parameters for load design, post-blast evaluation, to create an intelligent blast design.

Compare the tool responses of different vendors against your reservoir geology to determine the best tool and resistivity curves. To create high-accuracy final Inversions, integrate all memory data. For fast results, deploy the inversion module on High Performance Computing devices (HPC). To prevent the target zone from exiting and to keep the reservoir in place, calculate the distance to the bed boundary in real time. You can create phase shift and attenuation curves using non-azimuthal instruments, interval length, and parameters for 2-layer boundary mapping in real time. To predict a tool’s log response in advance, you can build an earth model of the formations that you are drilling. This will allow you to easily model resistivity effects such as shoulder effects, polarization Horns, and anisotropy.

PLAXIS 3D provides the most important functionality to perform safety analysis and deformation for soil and rocks. This software is designed to allow you to model in 3D. Easy to create and scale construction sequences. Stable-state groundwater flow calculations can be done, including boundary conditions, material parameters, drains, wells, and drains. To model soil-foundation movement, such as slipping or gapping, use interfaces and embedded piling elements. You can get reliable results using realistic soil models and a full range of visualization capabilities. PLAXIS 3D provides different calculation types to address the unique geotechnical issues of soil structure interactions.

Teams can work together using intuitive workflows, rapid data processing and visualization tools. This allows them to have the discussions that lead to decisions. Use user-friendly tools to build and refine geological models. You can quickly generate models from large data sets without the need for wireframing. Visualize your geological data in 3D. Gain visual insight to help you interpret it. When you add new data to a modeling, the rules and parameters that you have already established are automatically applied. You can make a change to one model, and all dependent models will be updated immediately. This ensures that models are always up-to-date. Leapfrog Geo's features make it easy to analyze data. These include exploratory data analysis and distance function. Rapidly test new ideas and refine your model. Duplicate models, and use streamlined workflows to iterate interpretations as soon as new insights become available.

g-Platform QC : Acquisition QC includes the applications required for testing the acquired 2D/3D Seismic in the field or aboard the vessel during the acquisition process. - Geometry Assignment QC and Edit - Basic refraction and FB picking - SC residuals and deconvolution Signal processing - Migration of stacks and post-stack Geomage™ g-Platform provides processors with an interactive and graphic experience when working with seismic data. The software is divided into packages for Acquisition QC, Land, Marine, VSP, and Depth Imaging applications. This simplifies licensing according to the domain that you need to work in.

Geology by SeisWare allows for efficient geological workflows. It is an intuitive and fast interpretation tool. Our Petrophysical Calculator is a favorite with clients. You can create and customize calculations such as net pay, assign zones attributes, and many more! We are experts and we build our software with your guidance. Our software has been shaped by user feedback and client focus groups. Our software packages are compatible so your team can use them together! Geophysics by SeisWare is fully integrated with Geology for seamless data integration. This allows for fast results and no need to import or export data. Our software must keep up with your plans. Geology by SeisWare works intuitively and is responsive. You will be amazed at how fast you can run! You can run multiple calculations in sequence using a variety inputs such as log curves, log curvases, zone attributes and previous outputs. Perform aggregate functions like summations and averages of data.

DEPRO is a comprehensive torque and drag program. This software can help reduce the risks associated with drilling and completion operations. DEPRO calculates the horizontal well's length based on specific friction factors. It also recommends rig specifications and determines the weight required to set a packer. DEPRO covers hydraulics. It includes surge and swab and equivalent circulation densities, bit optimization, hole cleansing, and volumetric displacements. DEPRO allows for the complete examination of downhole drilling hydraulic conditions and the identification of any potential problems before field execution. Stress calculation, torque, drag, and tension calculations. Models for both soft and stiff strings. Drilling, back reaming and rotation off the bottom are all possible. Prediction of sinusoidal and helical buckleling. Comparison of field data on surface torque and workload. Friction factor sensitivity analysis. Analysis of packer setting.

Maptek DomainMCF uses machine-learning to create domain boundaries directly from sample information for rapid creation of resource model. Geologists can quickly and easily create domain or grade models by feeding in data from drilling or other sampling methods. Maptek DomainMCF replaces complex desktop software and shifts the costs from capital budgets to operating budgets. Flexible licensing supports faster, secure cloud processing. Resource models can be generated in minutes or even hours depending on the size of the deposit, the data density and the complexity. Many operations are only able to update their resource model once or twice per year. DomainMCF allows you to model your project in minutes, with results that are comparable to those of traditional techniques. You can still control the process, without having to do the tedious preparation work. Models can be updated quickly to reflect current data and new data.

Free Audio Editor allows you to digitize audio recordings from rare music cassette tapes, vinyl records, and videos. It can also create standard digital sound files. Included are a timer and an input level triggered recording. The button can be used to activate the system Windows Mixer from anywhere without having to visit the control panel. For further perfection, the recording can be loaded directly into the waveform window. Edit audio with the traditional waveform view and frequency-based spectrum display. This makes it easy to remove unwanted noise. Intuitive cut/copy/paste/trim/mute and more actions can be performed easily. The selection tools allow for editing operations that are precise to a millisecond. You can enhance your audio with over 30 native signal and effect processing engines. These include compression, EQ and chorus, delay, chorus and reverb. It greatly increases your audio processing abilities.

DUG Insight lets you focus on geoscience and help you make your next discovery. DUG Insight, a fully-service interactive software platform, allows you to process advanced seismic data and image, interpret, visualize, and QI--across marine, land, and ocean-bottom survey surveys. DUG's multiparameter FWI imaging is also included for innovative least-squares imaging solutions. DUG Insight is a new approach to geoscience. It combines powerful features with an easy-to use interface. DUG Insight's processing module and imaging module allow you to access a variety of key technologies that will turbocharge your seismic workflows. These technologies include deblending and noise removal, designate, multiplex, data regularisations, imaging, post-migration processing, and data regularisation. DUG Insight's interactive platform and interpretive platform allows you to process your data and meet your OBN, land, and marine processing and imaging requirements.

The initial development of mud-logging software was based on extensive market research and the extraction of their strengths and weaknesses. It was then designed natively using the expertise and knowledge of MTC specialists. This original design is customizable and can be customized to meet any requirements. Mud-Logging Software from MAPSA Technology Center also offers significant computational speed and graphical displays thanks to the use of the most up-to-date and efficient software development technology. This gives ML Pro technical superiority over its worldwide counterparts in terms computational speed and user-friendly graphical interface. Different ways of illustrating drilling parameters are possible.

Maptek creates easy-to-use, smart software for mining, aggregates, and civil engineering applications. PointModeller is the latest solution for processing point clouds collected by drones or other sensors. PointModeller converts drone or other lightweight mobile sensor point clouds into deliverables that are suitable for civil, topographic and quarry operations. PointModeller converts your 3D point cloud into deliverables using powerful 3D visualization tools, smart filters, and interactive manipulation. Powerful, intuitive tools help manage stockpile inventories through accurate volumetrics. They also create topographic or 3-D surfaces and track digging compliance. PointModeller can help you increase your productivity and optimize workflows in civil, topographical, or quarrying applications. A cost-effective subscription package that provides decision support for drone or mobile sensor users.

SurvOPT allows you to analyze the effects of changes in survey design in real-time. SurvOPT seismic survey software can not only find efficient shooting plans and precise completion estimates but can also compare vessel configurations side-by side, explore different costing models, and analyse the effect of any parameter change. SurvOPT offers vessel-specific acquisition plans that maximize acquisition time and minimize non-productive line change time. The patented optimization engine is able to handle all scenarios, including obstructions, timesharing and tides, priority areas as well as crew changes, circle calls, weather downtime, crew changes, crew changes, crew shifts, crew changes, circles and port calls. SurvOPT allows you to specify feather requirements for individual lines and will optimize line scheduling around them, placing you on the right line at a time that is convenient without any unnecessary delays.

Comprehensive seismic processing and QC software to process data acquired on-shore, offshore, or in a vertical seismic profile. VISTA desktop seismic processing software allows data processing from the early stages of acquisition QC to the final processing and interpretation 2D and 3-D seismic data acquired either onshore or on land. It also supports vertical seismic profiles (VSP) in all industry data formats. VISTA software makes it easy to navigate workflows and evaluate datasets with the interlinked and interactive displays. You can also add your own algorithms via the MATLAB SDK or C++ interface. Advanced processing capabilities are supported by the software, including AVO and angle analysis (AVA), multicomponent processing, 2D and 3D VSP processing, and AVO and angle of incidence analysis (AVA). Advanced field package, including full geometry QC and post-stack migration. The complete solution, including QC, prestack migration and time depth image analysis.

You can locate critical failure surfaces and calculate the safety factor using a combination global metaheuristic search methods with local surface-altering technologies. Results can now be generated in minutes with parallel processing for both failure searching as well as FS computations. Integrating 3D wireframes (representing geological surfaces, modeled faults and surveyed topography) can streamline your workflow and provide more detail. Directly into your 3D models. It is now easier and more efficient than ever to create slope stability models. Import surfaces from mine planning software or geological modeling. Or use built-in surface construction methods that use coordinates or borehole information. You can either build surfaces using point cloud data, or import block models from programs such as Vulcan, Deswik and Datamine.

GeoSpatial Manager enables dynamic, automatic updates on any survey surface in order to produce a single truth at any given time. GeoSpatial Manager combines smart visualisation tools with a web interface. The result is a simple-to-use management system for as-built surfaces, which can be accessed by all employees in an organization. This unique solution dynamically merges and updates surveyed surfaces. Users can manage, visualize and download any as built surface at any time during the project lifecycle and apply it to downstream activities. Determining your as-built surfaces now and at key times in the future improves understanding, collaboration, and efficiency. The solution allows for all surfaces to be accessed, and dynamically visualized, using a time slider. Centralized storage in a cloud or network server eliminates frustration and risks associated with locating survey files stored in different folders on local or server machines.

Borehole data is growing in size and complexity. It is stored in different formats and distributed, loaded, duplicated and loaded repeatedly between various databases. Access to crucial project data may be slow or impossible due to incomplete, inaccurate, or uncertain information. This makes it difficult for decision-makers to make fast-paced decisions. Recall™, Borehole Data Management Software is the industry's best solution for efficiently managing and publishing both raw and edited borehole data within one integrated system. Recall software has two databases. One for edited data, and one for raw data. Both databases work together as one integrated system. Data is only loaded once and quality control is performed once. Common queries and standardized naming conventions are used across both databases to reduce cycle time and redundancies caused by multiple copies.

A survey-based viewer that is geographically accurate allows you to view seismic shot lines. Layers such as NTS grids and DLS grids, culture and wells can be incorporated. You can add lines, text, areas, and plot directly from your computer. Show 3D data in an outline or all points of source and receiver. Click on a line to open the database record. Third-party software can be used to link scans of documents in electronic image format (e.g. TIF or JPG) to allow viewing and printing. Many packages offer editing, faxing and e-mail capabilities. These features add more versatility to TerraSeisTM. Flexible searching tools that use your SEG-P1 or seismic line meta-data to locate lines consistently and uniformly. Your data can be inter-rerelated in creative ways that maximize the potential of your data. To assist in the selection of data sets for further processing, show key data elements in your locate window.

Over 30 years of setting the standard for geophysics modeling All raw data, geochemistry, geophysics, and geophysics can be viewed, QA/QC'ed, transformed, and analyzed with powerful 2D/3D modeling capabilities. You can quickly assess large data sets and run multiple filters to test them. Coordinate projection in real-time allows you to spatially align all data. You can import, overlay, and use more than 50 formats, including CAD, GIS, mine planning, and modeling. You can import data directly from many online geoscience repositories. Combine geoscience data to create a complete model. Files can be easily shared with teams that work in different formats. You can create your own processes using the Oasis montaj API. Each project is unique. Automate repetitive and difficult data processing tasks. You can streamline team workflows and save time so you can concentrate on generating insights. You can also add specific tools and workflows to access the geoscience data that you require.

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

Geophysics by SeisWare provides all the tools necessary to interpret seismic plays, both conventional and non-conventional, in one comprehensive package. Large projects can be shared among asset team members and are fully scalable. The interface is simple and easy to use, so you can focus on your results and not on fighting your software. Our comprehensive geoscience package now includes Geophysics by SeisWare. Are you looking to get a complete geoscience solution that can do seismic interpretation, synthetic generation, petrophysical calculations, and launch a cross-section in multiple windows at once? SeisWare Geoscience 64-bit, high-performance software allows you to double your data with no additional time. SeisWare Geoscience can be used for both geologic and seismic interpretation.

To analyze soil settlement, perform immediate settlement analysis. You can easily create soil profiles with RSLog, CPT boreholes and soil classification. Ground improvement methods such as soil replacement, vibrocompaction, and stone columns offer more flexibility. They can be applied to different stages at different depths. Sensitivity analysis can also be used to analyze settlement properties, such as stiffness, top and bottom depths, spacing, etc. You can perform CPT and liquefaction analysis together or separately. CPT analysis results can yield 29 different parameter results. You can calculate liquefaction based on either Cone Penetration Test or Standard Penetration Test data.

Every project is difficult, but the geotechnical analysis does not have to be. PLAXIS 2D offers fast computations. Advanced finite element and limit equilibrium analysis of rock and soil deformation and stability. Also, soil structure interaction, groundwater and heat flow. PLAXIS 2D, a powerful and easy-to-use finite-element software for 2D analysis and stability in geotechnical and rock mechanics, is available. PLAXIS is used by the top engineering firms and institutions in civil and geotechnical engineering. PLAXIS 2D can be used for many applications, including excavations, foundations, embankments, and foundations, as well as tunneling, mining and oil and gas extraction. PLAXIS 2D provides all the necessary tools to perform safety analysis and deformation of soil and rock. It does not need to take into account creep, steady-state groundwater, thermal flow, consolidation analysis or any other time-dependent effects.

It draws on the strengths of the geoscientific data to efficiently and effectively meet the needs of multiple industries. It can be used to assess contaminants, soil and rock properties, as well as mineral deposits and oil and gas deposits. It is ideal for the environmental, geotechnical, mining, oil sands, and petroleum industries.GaeaSynergy is comprised of a base application and several optional modules. The base application is completely free and serves as the foundation for all other modules. The optional modules allow you to generate geotechnical reports and test results, lab analyses reports and boring and well logs, cross sections, fence diagrams, and boring and well logs. GaeaSynergy's base application consists of many components that offer functionality to both the base and optional modules.

Combine all data sources to get a complete picture. This eliminates manual processing and allows you to uncover new insights and risks. Combine 1D, 2D and 3D geometries and multiple analyses from different products to increase your problem-solving capabilities. To better understand the complexity of your problem, you can clone that analysis and modify boundary conditions or material properties. You can run multiple analyses simultaneously and monitor the results. You can run multiple processes concurrently to generate construction sequences and establish initial conditions. Perform sensitivity analyses, model complex time sequences or divide a complex problem in smaller packages. You can dive deep into your project and create a single file that defines it. Then, you can continue to review the results and reassess as needed.

DecisionSpace®, 365 Essentials is an industry-leading exploration and production (E&P), which provides the best performance at a reasonable price to help you run your business. This software is flexible and you only pay for what you use. Advanced seismic processing technology and QC workflows allow you to gain a detailed and insightful understanding of subsurface. Optimize your well operations to increase productivity Start without any data entry or report configuration. You can jump start your economics evaluations by having instant access whenever and wherever you need it. Self-service well construction software that reduces well preparation time, increases reliability, and maximizes well productivity.

No matter if you are drilling a vertical well or an extended-reach one, a low or high equivalent circulating density (ECD), can cause serious drilling problems and compromise your project's finances. An optimal ECD is essential for a successful drilling operation. It is essential to accurately model the drilling process and optimize the drilling hydraulics. It allows engineers to plan ahead, improving drilling efficiency, reducing risk, decreasing non-productive times (NPT), and so on. Pegasus Vertex's HYDPRO hydraulics model covers all aspects of hydraulics including surge and swab and bit optimization, hole cleaning and volumetric displacements. These features allow downhole drilling hydraulic conditions to be thoroughly examined, and any potential problems identified before field execution.

It is not always possible or practical for spatial phenomena to be predicted and modelled using real-world observations. ArcGIS Geostatistical Analyst allows you to generate optimal surfaces using sample data and make predictions for better decision-making. These tools are particularly useful for atmospheric data analysis and petroleum and mining exploration, precision agriculture, environmental analysis, and fish and wild life studies. ArcGIS Geostatistical Analyzer extension provides a suite interactive tools that allow you to visually examine your data before it is analysed. ArcGIS Geostatistical Analyst can help you quantify uncertainties if your data is incomplete or subject to errors. To perform risk analysis, create multiple versions of the same surface. Geostatistical simulation creates multiple surfaces that simulate the real phenomenon and give possible values.

Analyzing the strength characteristics and constitutive behavior of your rock and soil materials will help you to fully understand them. This will allow you to establish strength envelopes and other material parameters. To get a deeper look at the stress-strain relationship between your soil materials, you can use constitutive models such as Modified Cam Clay and NorSand. RSData also includes RocProp, a database that contains intact rock properties. This application can be used as a standalone application. You can see the complete list of technical features within RSData. Compare the results of field and laboratory tests to determine your rock's strength criteria. RSData can import laboratory tests and stress-strain pathways of soils for visualization. You can compare and calibrate material parameters by overlaying experimental data with predicted constitutive behavior. Different constitutive models are used to predict typical laboratory tests.

Surface and underground mine operations benefit from dedicated workflows and reporting features that improve efficiency and productivity. With intuitive point cloud processing, you can get a clear picture of your project's status. Process and combine the point cloud data from Maptek's laser scanners, UAVs and other lidar sensors to create easy-to understand deliverables. Measure stockpile volume with ease, update survey models at the end of each month with new field data and analyze geotechnical risk that could impact your operation's safety. PointStudio gives you the tools to accurately quantify and communicate conformance with design. PointStudio can be delivered on the Maptek Workbench to ensure interoperability with all Maptek solutions. Users can easily create workflows to automate site processes and standardize them. Custom toolbars and menus can be easily configured to suit individual work patterns, standardize processes across sites and operations, and adapt workflows.

SPW software is an interactive seismic processor system. SPW can be parallelized to run on multi-core processors that have threads on Windows 7 or Windows 10. SPW can be used on workstations, desktop computers or laptops. It can also be installed as a client/server configuration to meet large processing requirements on high-end server PCs. The SPW 3D package provides a complete processing system to process 3D P-wave seismic reflectance data. The system's strengths include data QC and interactive analysis. These allow for rapid control of data quality, and the checking of processing results.

Most likely, we don't know the thickness of the source rock in our kitchen area. We also don't know the heat flow or secondary migration losses. You can only rank prospects by running different scenarios with these parameters. Prospects that are charged in the most scenarios will have the lowest risk. Top seal capacity, unconformity and source rock facies are all possible risks. There is also the possibility of different interpretations of seismic. It is absurd to invoke multi-component Kinetics when we don't know the thickness, TOC or HI of the source rocks. Drag and drop your interpreted surfaces to Trinity and draw cross sections interactively through them. You can move the cross section with the mouse to move through the data. In 3D, the cross sections look similar to fence diagrams except that fences can be moved. This will reveal a lot more geology than static maps.

Information managers need to be able to quickly find, edit, manage, and transmit data. This will allow them to support their business processes by providing the right information at the right time to the right people. ProSource E&P data management system and delivery system offers a powerful and comprehensive solution to acquire, manage, and deliver corporate data required by all departments within an E&P company. The Seabed E&P open-data model and database is the foundation of the ProSource data management system. It provides a structure for an integrated work environment and stores a wide range of data domains in one integrated repository. The platform-neutral interface provides intuitive and compelling tools for acquiring, querying, editing and comparing data, as well as transferring and controlling data quality.

Lynx Exploration Archivist Seismic scanning and Vectorising (LEASSV software) is a comprehensive software solution that allows you to re-vectorize scanned sections of seismic sections and output the results as industry-standard SEGY format trace files. The suite includes utilities that allow output files to be prepared for loading into a seismic interpretation workstation, or for further processing. The Lynx Launcher allows you to access all Lynx programs from your Lynx desktop icon. It also contains utilities and applications. You can install from CD-ROM or downloaded setup files.

Pandell LandWorks, a cloud-based land asset management tool, is the core of our powerful land software suite. Pandell LandWorks uses interactive displays to show your holdings. Quick inspector panel access gives you an overview of your land information. You can view representations of your mineral assets and surface areas. You can choose from standard reports, or filter and save any search criteria to create custom Excel exports. Pandell LandWorks smart Grid queries offer flexible reporting tools that allow for detailed analysis and decision-making. Intelligent data processing workflows reduce errors and redundant data entry with time-saving shortcuts. Granular data tracking provides more detailed acreage histories, and Pandell LandWorks can create your own chain for you.

You can create your own analysis graphs using a drag-and drop format. Choose from a variety of data types, displacements, coordinates and vectors. Additional information like site voltage is also available. You can change the data reference values, date ranges, and filter your data-set with filters like 24h averaging. For simplified reporting, design your analysis graphs. Then add them to your dashboard. Heat Mapping - Choose any data type you wish to display, adjust the time range, and then display the movement as a heat map. You can adjust the scale and weighting of heat mapping colors to meet your reporting needs. For quick site reference, overlay project imagery below your heat maps. To cross-reference data from multiple systems, you can integrate any number of prisms and types of sensors.

Advanced seismic processing and imaging can condition data for depth imaging and interpretation. Companies can configure the system to meet their business objectives and user needs through modular design, open architecture, and compliance to standards. The most advanced seismic processing and imaging solutions available, including SRMA and 5D interpolation and Aspen Echos RTM. A library of over 350 modules that allows the construction of data-dependent processing workflows to solve current geophysical challenges. The industry's best interactive link between data, seismic applications, and parameters. Aspen Echos is the standard seismic processing system in the oil and gas industry for producing 2D and 3-D seismic images of subsurface.

RokDoc is the culmination of over 20 years of industry experience and innovative research. RokDoc provides a seamless interface that integrates everything from data quality control and modeling and prediction. It also integrates multidisciplinary workflows for Quantitative Interpretation and Pore Pressure. Assess sandstone, carbonate, and shale reservoirs for improved hydrocarbon exploration and production optimization, CO2 sequestration and geothermal surveying. RokDoc offers a comprehensive and extensive library that includes rock physics, cutting-edge seismic inversion techniques, as well as a complete geomechanics solution. Automated and easy evaluation of geological "what-if" scenarios. To better understand the probability and success of subsurface resource exploitation, and stored fluid monitoring, capture uncertainty in data and models.

Geomage, a global company, develops and provides advanced technologies for seismic processing and interpretation. It also offers services and software to a wide range of oil and natural gas companies. Geomage's seismic-processing portfolio is based upon the innovative MultiFocusing™ technology. This has been used for hundreds of exploration sites across the globe to provide the most accurate imaging and better structural and stratigraphic detail of the subsurface. The g-Viewer is a tool that allows the visualization and selection of seismic datasets on a 3D scene. The view is available as a commercial version, and allows for the plotting of 2D sections and volumes.

Tecplot focus helps you get answers faster and allows you to quickly plot all of your engineering and test data exactly how you want. Analyze and analyze complex data, create multiple XY, 2D, and 3D plots, then communicate your findings to colleagues and managers with stunning, high-quality animations and images. Automating routine data analysis and plotting tasks can help you save even more time and effort. Tecplot Focus is available on Windows, Linux, and Mac platforms. It meets the needs for multi-platform engineering groups.

The increased use of extended-reach, directional wells means that tubulars are subject to more torque and drag (T&D). This can lead to pipe failures, stuck pipes, and expensive fishing jobs if the torque and drag are not assessed. TADPRO, the most comprehensive torque-drag software on the market, eliminates many of the hazards of a drilling program or completion design. You can set limits on the horizontal length based upon specific friction factors. It is also possible to evaluate the ability to transfer the required weight to a liner top packer. It is possible to predict the torque and hookload of rig equipment by analyzing forces downhole. TADPRO is a user-friendly software that produces the best graphical outputs and flexibility in the industry. Advanced features make the software extremely user-friendly and allow for easy interpretation of results.

The 10 largest seismic networks outside of Japan use the Antelope mission-critical data processing and data acquisition software. It is 100% commercially owned and supported entirely by BRTT, Inc., a Kinemetrics strategic partnership. You can tie-in with almost any seismic network in the World. Unique automated real-time response spectrum computation with exceedance alarms. Richly documented APIs to interface with client programs.