Alternatives to EkkoSense

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

Sunbird's DCIM solution is one of few on the market that focuses on only two of the most difficult and costly challenges data center operators face: monitoring, and operations. Sunbird's DCIM solution is simple to use and deploy, unlike other providers that offer complex, bloated, and expensive software. It allows you to better manage assets and change; it also allows power monitoring, environmental monitoring, and energy management.

Quanta Datacenter Manager (QDCM) serves as an all-encompassing tool aimed at improving the management of data centers, optimizing energy efficiency, and enhancing system performance. It provides data center managers with the ability to monitor real-time power use and temperature levels through a user-friendly dashboard, while also allowing them to tailor power consumption policies for individual servers. The platform's energy optimization capabilities evaluate past energy usage trends and cooling metrics, offering practical suggestions such as redistributing workloads from servers that are not fully utilized and enhancing cooling effectiveness to lower energy expenses. Additionally, QDCM features a structured approach to data center supervision, presenting the condition of all managed components, including metrics on temperature, power usage, available space, and operational events. This comprehensive view enables users to easily access server inventory information and establish power consumption caps. Furthermore, the intuitive interface and customizable dashboard of QDCM facilitate effective power management and bring attention to systems that are not being fully utilized, ensuring that data center operations remain efficient and cost-effective. Overall, QDCM stands out as a vital resource for data center managers striving to maximize performance and minimize energy costs.

Power IQ® DCIM Monitoring Software empowers data center and facility managers to effectively monitor and optimize their current power infrastructure. With features such as health maps, power analytics, cooling charts, and detailed reports, the software alerts users to possible issues while providing insights into real-time power loads, trends, and overall capacity across the infrastructure. A customizable dashboard offers a comprehensive view of power capacity, environmental conditions, and energy usage, regardless of the vendor. Users can conveniently access essential metrics related to rack power, cooling, airflow, and events with just a single click. This all-encompassing environment management solution aids in identifying potential problem areas, reducing energy consumption, and ensuring a secure atmosphere for IT equipment. Additionally, it allows for the consolidation of information regarding the names, polling status, locations, models, and firmware of all rack power distribution units (PDUs) onto a single interface, significantly enhancing management efficiency and freeing up time for other critical tasks. Ultimately, this software not only streamlines operations but also contributes to more sustainable data center practices.

The Dell PowerEdge C-Series servers represent a collection of high-density, scalable servers tailored for hyper-scale and high-performance computing (HPC) scenarios. Engineered to efficiently manage workloads requiring substantial processing power, expansive storage, and effective cooling systems, these servers boast a modular and adaptable architecture. This design enables customization to cater to the unique demands of diverse applications, including big data analytics, artificial intelligence (AI), machine learning (ML), and cloud computing. Prominent features of the PowerEdge C-Series encompass compatibility with the latest Intel or AMD processors, substantial memory capabilities, a range of storage alternatives, including NVMe drives, and advanced thermal management solutions. By merging performance, scalability, and flexibility, Dell PowerEdge C-Series servers equip organizations with the essential resources to adeptly navigate data-intensive and compute-heavy tasks in the ever-evolving IT landscape. As technology continues to advance, these servers will remain pivotal in meeting the growing demands of modern computing environments.

NetZoom DCIM Solutions is a data center software company that helps professionals model, monitor, manage and access physical, virtual, and cloud IT infrastructure.

CENTEROS provides comprehensive tools to run a data center. Its capacity management tools provide a graphical view of resources to help identify potential issues or spare capacity related to space, racks and power, cooling, weight and network connections. Users can capture data in real-time from intelligent devices to detect power, temperature and humidity issues. The platform's workflows for change management ensure that installations are completed on time and with consistency. Its asset management tools allow efficient searching and locating equipment within the data centre. CENTEROS also includes tools for assessing the impact of changes on equipment and customers, as well as features for managing contacts and customers to maintain authorized equipment access.

Hydra Balance is an innovative hybrid system tailored for commercial applications, designed to efficiently harness unused energy and streamline consumption through intelligent algorithms. This system integrates seamlessly with current heating and cooling infrastructures, delivering instant savings and contributing to reduced environmental impact. The hybrid energy-saving solution is particularly beneficial for commercial establishments that rely on centralized air conditioning year-round. Featuring a self-sufficient water heat pump, it captures thermal energy expelled from existing air conditioning units to provide heated water for showers, pools, and kitchen use. Advantages include significant reductions in energy expenditures, cutting heating and cooling costs by 50-70%, while also promoting sustainability by lowering local and global pollution levels by up to 80%. Its installation process is straightforward, as it can be retrofitted to existing heating and cooling setups, ensuring a swift return on investment with immediate financial benefits from the first day of use. Moreover, it boasts the convenience of remote 24/7 access, allowing for continuous monitoring and management of energy consumption. This feature enhances operational efficiency and further supports the commitment to eco-friendly practices.

Lenovo's high-density systems provide significant computational power within a compact footprint, making them ideal for demanding tasks such as High-Performance Computing (HPC), Artificial Intelligence (AI), cloud services, grid computing, and data analytics. In today's fast-paced technological environment, it's crucial for servers to feature contemporary designs. Our high-density servers are equipped to handle even the most intricate simulations effortlessly. These robust systems are specifically engineered to meet your needs across the fields of artificial intelligence, cloud computing, grid services, and analytics. Furthermore, designed with scalability in mind, our innovative water-cooled solutions prioritize security while maximizing density. Combining liquid cooling technology with exemplary energy efficiency, the ThinkSystem stands out as a smart choice. This approach ensures that all the processing power you require is housed in a sleek and efficient package. By employing advanced heat removal techniques that outperform traditional air cooling, essential components maintain lower operating temperatures, leading to enhanced performance in a system that runs quietly and efficiently. Ultimately, Lenovo's dense systems represent a blend of power, security, and innovation, making them a valuable asset for any modern enterprise.

After over 34 years of refinement and input from users, Simcenter Flotherm has established itself as the premier software for electronic cooling simulations, specifically tailored for thermal analysis of electronics. This powerful tool accelerates product development across various levels, from IC packaging and PCB design to expansive systems like data centers. By utilizing rapid and precise CFD simulations, it enhances thermal management in electronics, ensuring reliability from the initial pre-CAD exploration phase to the ultimate verification stage. Simcenter Flotherm seamlessly integrates into the electronics development process, enabling thermal engineers to conduct simulations that yield prompt and precise results, which are crucial for collaboration with other engineering teams. Furthermore, it facilitates informed decision-making regarding thermal management from the initial architectural stages to the final verification of thermal designs. This comprehensive approach not only shortens development timelines but also mitigates the risks associated with expensive reliability failures and late-stage redesigns. In essence, Simcenter Flotherm stands as a vital resource for any organization aiming to enhance its electronic product performance while maintaining efficiency and reliability.

Collaborating with top industry figures to achieve net-zero carbon goals is essential. Given that vehicles can remain stationary for up to 95% of their lifespan, leveraging this dormant energy might be the key to a sustainable future for your business. CoolPlanet Mobility serves as an innovative software platform tailored specifically for the transport and logistics sectors of the future, adaptable for a variety of industries. Addressing the decarbonization challenge in mining is crucial, as mining vehicles typically contribute to around 50% of direct emissions at a mining site. The shift towards electrifying buses presents substantial opportunities for generating future value, resulting in a reduced Total Cost of Ownership (TCO) through the implementation of CoolPlanet Mobility, which enables efficient charging and the profitable use of battery resources. By transitioning to electric fleets, logistics companies can capitalize on significant cost-saving opportunities while maximizing the value of their assets. This dual focus on sustainability and profitability paves the way for a more environmentally-friendly and economically viable transport industry.

Core Scientific provides specialized, high-density colocation infrastructure along with advanced software solutions tailored for demanding computational tasks like AI, machine learning, high-performance computing, and digital asset mining. The company offers scalable high-density computing environments with a power capacity exceeding 1.3 GW, ensuring quicker deployment times and enhanced cooling and power systems specifically designed for intensive workloads. Its digital mining services include proprietary fleet management software that can oversee up to one million miners, along with features for real-time thermal monitoring and hash-price economic analysis to maximize profitability. Additionally, Core Scientific integrates high-density racks (ranging from 50 to over 200 kW per rack) with robust enterprise-grade infrastructure, supporting a diverse range of applications including AI model training and inference, cloud computing, financial services analytics, critical government systems, and healthcare research initiatives. This comprehensive approach allows Core Scientific to meet the diverse needs of its clients while maintaining a focus on efficiency and performance.

SmartZone™ Cloud Software represents Panduit’s innovative approach to Data Center Infrastructure Management (DCIM). This cutting-edge, cloud-native solution has been meticulously crafted to leverage the advantages of cloud technology, ensuring flexibility, scalability, and improved manageability. It enhances operational efficiency while simplifying the oversight of Data Center, Enterprise, and Edge Infrastructures. The platform is designed to support comprehensive management, monitoring, and alerting of power, cooling, environmental conditions, IT resources, and connectivity. Additionally, it features a robust cloud architecture that incorporates encryption for both data at rest and in transit, two-factor authentication, and detailed access controls. With a development lifecycle focused on security and fortified by multiple leading-edge security scanning and assessment tools, SmartZone™ thoroughly evaluates today’s intricate web applications and services for potential vulnerabilities. Ultimately, this solution not only streamlines infrastructure management but also fortifies it against modern security threats.

Optimum Path's Visual Data Center serves as a robust Data Center Infrastructure Management (DCIM) software solution for enterprises, seamlessly combining modeling, planning, and live monitoring of IT assets alongside the entire power and cooling framework. This platform boasts an interactive 3D visualization feature, allowing users to navigate virtually through the complete physical setup, from expansive global data center networks to individual equipment. It is equipped with tools for capacity planning and forecasting for essential resources such as space, power, cooling, and cabling, while also offering modeling and simulation tools to evaluate the potential impacts of moves, additions, and changes before implementation. Additionally, the software provides change management capabilities that help in generating work orders, designating tasks, and monitoring performance, as well as centralized management of IP cameras to bolster security measures. Furthermore, it incorporates real-time environmental monitoring, tracking temperature and humidity levels through integrated sensors for enhanced operational efficiency. This comprehensive approach ensures that organizations can maintain optimal conditions within their data centers effectively.

MacroFlow is an advanced software application designed for the swift and precise flow and thermal design of various engineering flow systems. It utilizes Flow Network Modeling (FNM) to depict the flow system as a network of interconnected components and paths, capturing the overall flow and thermal properties. The behavior of the system is analyzed through a direct solution approach that incorporates the conservation equations for mass, momentum, and energy at the system level. Featuring an intuitive Graphical User Interface (GUI), MacroFlow enables users to rapidly build intricate network models. Its extensive component library encompasses both standard geometric parts and specialized components tailored for applications like electronics cooling, semiconductor processing, and filtration, as well as vendor-specific libraries. The solution methodology employed is highly robust and efficient, allowing for the analysis of a typical practical flow system to be completed in under a minute. This efficiency makes MacroFlow an invaluable tool for engineers seeking to optimize their designs quickly and effectively.

Introducing the latest member of the PowerEdge lineup, PowerEdge XE servers are specifically designed to optimize acceleration for demanding compute tasks, artificial intelligence, machine learning, deep learning, and high-performance computing workloads. Transform your operations and infrastructure to support innovative projects through uncompromising AI acceleration capabilities. Achieve exceptional performance with a compact, liquid-cooled 2U server design tailored for AI and HPC projects. Enhance AI project outcomes using a powerful 4-way GPU configuration in a spacious 4U server. These servers allow for the development, training, and deployment of state-of-the-art machine learning models, as well as the acceleration of challenging high-performance computing tasks or the hosting of advanced virtualization services in a standard depth, 2-socket, 4U rack. PowerEdge XE stands out as the inaugural server series crafted exclusively for intricate and evolving AI and HPC workloads that demand peak performance. With these next-generation servers, you can expect unmatched performance, intelligence-driven insights, and a commitment to continuous modernization without any compromises, ensuring that your technological needs are met with the utmost precision. The PowerEdge XE servers truly exemplify the future of computing, making them an essential asset for any organization focused on harnessing the power of AI and high-performance computing.

The AMI® Data Center Manager (DCM) is an innovative tool aimed at improving the efficiency, dependability, and sustainability of corporate data centers. Utilizing real-time data acquisition, predictive analytics, and comprehensive reporting, DCM empowers organizations to make informed choices that enhance energy efficiency, minimize waste, and refine resource management. This platform is instrumental in overseeing power management, thermal environments, and overall system performance, offering actionable insights to optimize data center functions. Moreover, it aids in anticipating future requirements and tracking the environmental impact of the infrastructure, thus contributing to a more sustainable operational approach. By integrating such advanced features, DCM not only supports current operational needs but also aligns with long-term sustainability goals.

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

Enhance the efficiency of your buildings with our award-winning platform, which has demonstrated success in lowering energy consumption, retaining tenants, and boosting asset value. Demand Logic serves as a powerful software solution that offers real-time insights into building operations, facilitating swift actions and informed decision-making. By optimizing energy consumption, you can achieve cost reductions of up to 30% while also contributing to a decrease in carbon footprint. Our platform also simplifies maintenance tasks, allowing you to save precious time and resources while improving overall functionality. Experience a substantial reduction in comfort-related complaints, potentially reaching 100%, while simultaneously increasing staff productivity to foster a better work environment. Discover the remarkable outcomes and financial savings we’ve delivered to our clients through enhanced building efficiency. Our commitment lies in promoting energy conservation and carbon reduction, ultimately leading to lower expenses associated with heating, ventilation, and cooling systems, and ensuring the comfort and well-being of all building occupants. By prioritizing these efforts, we create not just efficient buildings, but thriving spaces that enhance the quality of life for their users.

CoolPDF offers a quick, efficient, and budget-friendly solution for creating high-quality PDF documents suitable for both beginners and experts alike. Functioning as a printer driver compatible with all operating systems, CoolPDF allows users to generate PDF files from anything that can typically be printed. This software serves as an excellent value for transforming virtually any document into a PDF format. One of its standout features is the rapid generation of PDF files, which supports nearly all languages worldwide. Users will find that the default settings require minimal adjustments to achieve the desired quality, resolution, and file size, with easy navigation provided through its menu or the accompanying manual. Among the quality settings offered by CoolPDF are options for default, screen, ebook, print, and prepress optimized layouts. Users have the flexibility to lower the resolution of PDF documents to 72 dpi or enhance it to an impressive 4000 dpi. Additionally, advanced users can take advantage of encryption features, allowing them to protect their PDF documents by establishing both a user password and an owner password for enhanced security. Overall, CoolPDF stands out for its combination of speed, versatility, and ease of use, making it a preferred choice for many individuals and businesses alike.

Autodesk CFD is a sophisticated software for computational fluid dynamics that allows engineers and analysts to forecast the behavior of liquids and gases with high accuracy. This tool significantly reduces the reliance on physical prototypes while enhancing understanding of fluid flow performance in various designs. It equips engineers with an extensive suite of robust tools aimed at optimizing system designs, managing thermal issues particularly in electronics cooling, and integrating Building Information Modeling (BIM) to improve occupant comfort in HVAC systems within Architecture, Engineering, and Construction (AEC) and Mechanical, Electrical, and Plumbing (MEP) sectors. Furthermore, the Application Programming Interface (API) and scripting capabilities enhance Autodesk CFD's functionalities, enabling customization and automation of routine tasks through the Decision Center. Additionally, the Decision Center streamlines the process of comparing system designs, thereby accelerating decision-making in design processes. This comprehensive approach not only improves efficiency but also empowers engineers to make more informed decisions in their projects.

Frost 3D software enables users to create scientific models that accurately represent the thermal behavior of permafrost influenced by various structures such as pipelines, production wells, and hydraulic facilities, while also considering the thermal stabilization of the soil. This software suite is built upon a decade of expertise in programming, computational geometry, numerical methods, 3D visualization, and the optimization of computational algorithms through parallel processing. It allows for the construction of a 3D computational domain that accurately reflects surface topography and soil composition; facilitates the 3D modeling of pipelines, boreholes, and the foundations of structures; and supports the importation of various 3D object formats like Wavefront (OBJ), StereoLitho (STL), 3D Studio Max (3DS), and Frost 3D Objects (F3O). Additionally, it includes a comprehensive library of thermophysical properties related to soil, building components, climatic influences, and cooling unit specifications, along with the capability to define the thermal and hydrological characteristics of 3D objects and the heat transfer properties on their surfaces. The software thus represents a sophisticated tool for engineers and scientists working in fields related to permafrost and thermal dynamics.

MuSES achieves unparalleled accuracy in electro-optic and infrared renderings through a systematic process that starts with the identification of heat sources like engines, exhaust systems, bearings, and electronic components, followed by a comprehensive in-band diffuse radiosity solution. After establishing your sensor at a specified range, you can render multi-bounce radiance values that have been spectrally summed, utilizing DeltaT-RSS contrast metrics for detailed analysis. If you have a sensor response curve available, simply import it to uncover insights you may have overlooked. With MuSES, you can explore reality in unprecedented detail. The software’s capability extends to comprehensively address physics from heat sources to environmental influences, enabling you to effectively manage thermal signature contrasts and assess control kits essential for low observable design in any geographical context. You can rigorously evaluate heat shields, cooling methods, and camouflage surface treatments for in-band radiance while accounting for atmospheric attenuation along the sensor’s line-of-sight. By prioritizing engineering tasks with MuSES early in your project development cycle, you empower your team to make informed decisions that enhance overall design effectiveness. This foresight can significantly streamline the development process and improve project outcomes.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

CoolFocus, offered by WayCool, provides a comprehensive solution that integrates Client, Donor, and Volunteer Management into a single user-friendly platform! Running your non-profit organization has never been more straightforward and efficient than it is now!

Supermicro's Max IO solutions are designed to be resource-efficient, budget-friendly, and well-suited for environments with limited space. Their compact and high-density server architectures deliver outstanding capabilities in computing, networking, storage, and I/O expansion. Utilizing specialized thermal designs, these servers are engineered to conserve energy, maintain quieter operations, and reduce overall power usage. Many models are equipped with redundant power and cooling systems, operating effectively even in a wider range of temperatures. Supermicro is committed to high quality, ensuring dependable, durable, and uninterrupted service. The Max IO solutions are compatible with various Intel® technologies, catering to a broad spectrum of applications. By supporting high-performance enterprise-grade Socket P processors, these solutions enable customers to address the demands of diverse sectors, including industrial automation (IPC), medical imaging, intelligent transport systems, digital signage, security, surveillance, network management, storage solutions, edge computing, and many others, thus reinforcing their versatility.

Camomile is a comprehensive CPU-optimization application developed by Outbyte. It's designed to improve the performance and lifespan of your laptop. It manages system load, maintaining optimal temperatures in order to prevent overheating. Camomile's intelligent optimization of power consumption extends battery life and allows users to be productive without having to constantly recharge. It also reduces fan noise, dust accumulation, and contributes to a quieter, cleaner computing experience. This is achieved by slowing the degradation of thermal interface material. Overall, Camomile provides a holistic cooling solution that is also power efficient and long-lasting, giving users peace of mind and smooth functionality.

Experience immediate, actionable insights through Cool Life Customer Relationship Manager (CRM). Tailored for intricate customer management scenarios, Cool Life CRM offers a comprehensive marketing solution alongside a complete relationship lifecycle process, equipping business leaders with essential insights. With its rapid, secure, and user-friendly interface, Cool Life CRM effectively meets the distinct market demands of niche sectors like professional associations, financial services, software, and various service-oriented organizations. By integrating a robust set of features, it empowers businesses to enhance their customer interactions and drive growth.

By clicking on an advertisement, you contribute to funding initiatives like the Big Blue Ocean Cleanup, which aims to maintain the cleanliness of our oceans, and Operation Posidonia, which focuses on preserving oceanic greenery. Sponsored links that are pertinent to your search will be displayed in the results and are clearly labeled as advertisements. Each time these links are clicked, it generates funds that support our partners in ocean conservation. Utilizing the Ekoru app allows you to engage in daily searches that benefit ocean health, as each search aids in the replanting of vital ocean seagrass and combats climate change through Operation Posidonia. Researchers from the University of New South Wales and the Sydney Institute of Marine Science are actively working to mitigate climate change by restoring ocean environments with seagrass, a remarkable blue carbon sink that is, interestingly, green in color. Ekoru.org operates on run-of-river hydroelectric power and is located in a data center that employs natural convection cooling methods instead of traditional air conditioning, ensuring that our servers do not produce any CO2 emissions. This commitment to sustainability not only supports environmental efforts but also encourages users to be part of a larger movement toward ecological restoration.

Providing adaptable performance options tailored for data centers of varying sizes, this system supports advanced storage technologies such as E3.S and E1.S, PCIe Gen5, and CXL. It sets a new standard for power efficiency by enhancing PSU density by as much as 4%. Promoting open collaboration significantly boosts product reliability and operational efficiency. An increase in redundancy for BIOS/BMC and critical components ensures stable performance, while enhanced security measures such as boot memory inspection and MFP memory protection fortify system integrity. Software-designed hardware redundancy minimizes both system downtime and energy consumption. Cloud-driven operations and maintenance achieve fault diagnosis accuracy of up to 95%. Comprehensive liquid cooling solutions are in place, alongside intelligent temperature management and hardware designs that optimize heat dissipation. Innovative packing technology leads to a 90% reduction in material volume and a 30% decrease in plastic waste. Additionally, dynamic power management facilitates a 15% reduction in energy use, all while providing real-time monitoring of carbon emissions. As a result, this holistic approach not only enhances performance but also drives sustainability in data center operations.

We partnered with Supermicro to showcase a first of its kind generative AI + design workspace for on-prem teams and remote teams, running on Supermicro’s new liquid-cooled AI Super Workstation, all managed via RAVEL Orchestrate™. This complete solution is available to partners and clients. Easy deployment and management of custom virtual workstations. Create customized virtual workstation images to meet the needs of your team. You don't need to be a virtualization or cloud guru to deploy your customized remote workstations. RAVEL Orchestrate has an intuitive workstation scheduler, and resource management controls that help you control costs. RAVEL Orchestrate™ is a unique solution that allows IT to create and distribute limitless custom software images to as many users, teams and regions in the cloud at scale. Deployment takes 90% less time compared to traditional imaging and deployment methods.

Fluentgrid CIS offers an all-encompassing, AI-powered Customer Information System that is both scalable and flexible, aimed at equipping contemporary utility companies. This system serves as a consolidated platform to oversee the complete customer journey, ranging from service initiation to billing and further interactions. By centralizing essential customer data and streamlining vital processes, Fluentgrid CIS allows utilities in electricity, water, gas, and thermal services to boost operational effectiveness, elevate customer experience, and enhance revenue generation. As a quintessential commercial off-the-shelf (COTS) solution, Fluentgrid CIS is designed for rapid deployment tailored to the unique requirements of utilities globally. Its integrated revenue protection features tackle issues such as theft and fraud, manage exceptions, track legal cases, and conduct energy audits to ensure reliable returns. Furthermore, the system includes functionalities for managing service requests and provides web and mobile self-service options, thus offering comprehensive support to both utilities and their customers. With its versatile capabilities, Fluentgrid CIS stands out as a vital tool for modern utilities aiming to thrive in a competitive landscape.

The Qualcomm® Snapdragon Ride™ Platform stands out as one of the most sophisticated, adaptable, and fully customizable automated driving systems in the automotive sector. It offers automotive manufacturers and suppliers the flexibility to implement the sought-after safety, convenience, and autonomous driving capabilities of today while maintaining the potential for future scalability. This platform boasts dependable, high-performance capabilities tailored for automotive needs, all while ensuring lower power consumption, enhanced simplicity, and greater safety in vehicles. Unlike many other autonomous driving technologies that depend on liquid cooling systems, the Snapdragon Ride Platform utilizes passive or air-cooling methods, making it a more efficient choice. With its unique multi-ECU aggregation feature, this versatile platform can seamlessly transition from active safety measures to convenience features and ultimately to complete self-driving solutions, accommodating a diverse array of vehicles. Furthermore, the Snapdragon Ride Autonomous Stack complements the high-performance, energy-efficient hardware, creating a powerful and sophisticated driving and perception system for vehicles today. This combination positions the platform as a leader in the realm of automotive innovation, paving the way for future advancements in the industry.

IconCool Mixer, a feature of IconCool Studio Pro, enables users without design expertise to efficiently create top-notch, professional icons. In addition to icon creation, IconCool Mixer offers various functionalities such as image layering and style blending. Users can craft distinctive icons using a selection of 1,000 image elements provided, even if they lack extensive graphic design experience. The latest version, IconCool Studio 8, serves as an icon editor that produces high-quality icons compatible with all iPhone, iPod Touch, and iPad models. This software also facilitates the creation of bitmap images for multiple platforms including iPhone, Android, and Unix applications. These bitmap images adhere to a single format in terms of size and color but can be exported in multiple file types like optimized BMP, PNG, JPEG, and GIF, allowing for versatility in graphic design projects. Overall, IconCool Studio offers an accessible way for users to engage in professional graphic design without needing specialized training.

Hyperview's cloud-based DCIM application is easy to use and adopt. The application empowers operations teams in optimizing their data center infrastructure. It also lowers costs and prevents unplanned outages. This application is a stark contrast to traditional DCIM software, which can be expensive, complicated, unnecessarily bloated, resource-intensive, resource-intensive, and complex. Hyperview allows users to discover (agentless), all network-connected IT assets. This gives them an accurate and current inventory of all their devices. All data related to the device is automatically captured and can be monitored for any changes. Further, the application can be used to monitor and manage capacity, rack space, floor space, asset lifecycles and temperature. The core features include Asset Management and Power Monitoring, Energy Management and Environmental Monitoring, as well as Capacity Planning and 3D Visualization.

Atrius Sustainability propels your path toward achieving net-zero carbon emissions by streamlining carbon accounting processes through automation. It integrates emissions, waste, water, and energy metrics into a unified format, ensuring compliance with CDP, GRESB, SASB, and TCFD standards. By assigning annual emission factors, you can establish yearly emissions rates with ease and generate comprehensive year-end reports with just a click. The platform efficiently consolidates data on Scope 1, 2, and 3 emissions, allowing you to concentrate on advancing your net-zero strategies rather than grappling with cumbersome spreadsheets. Additionally, its localization capabilities enable you to monitor the progress of each facility while utilizing organization-wide defaults for various aspects such as currency, utility expenses, language, date formats, and measurement units. A centralized emissions library effectively translates resource usage data into Scope 1, 2, and 3 emissions using either custom rates or established industry benchmarks like EPA, UK DEFRA, and eGRID. Furthermore, its user-friendly dashboards allow you to establish baselines for critical factors such as temperature, humidity, heating or cooling degree days, and occupancy levels, enhancing your overall sustainability efforts. Ultimately, Atrius Sustainability empowers businesses to make informed decisions that align with their environmental goals.

Crusoe delivers a cloud infrastructure tailored for artificial intelligence tasks, equipped with cutting-edge GPU capabilities and top-tier data centers. This platform is engineered for AI-centric computing, showcasing high-density racks alongside innovative direct liquid-to-chip cooling to enhance overall performance. Crusoe’s infrastructure guarantees dependable and scalable AI solutions through features like automated node swapping and comprehensive monitoring, complemented by a dedicated customer success team that assists enterprises in rolling out production-level AI workloads. Furthermore, Crusoe emphasizes environmental sustainability by utilizing clean, renewable energy sources, which enables them to offer economical services at competitive pricing. With a commitment to excellence, Crusoe continuously evolves its offerings to meet the dynamic needs of the AI landscape.

Tunefruit serves as a contemporary music marketplace that brings together a diverse array of content creators and various end-users. Previously, such platforms were known as 'Stock Music' or 'Production Music,' but we like to refer to our offerings as 'Micro Licensing' to resonate with our modern, web-savvy audience. Allow us to introduce Tunefruit – an innovative solution that enhances the traditional model. Our platform is vibrant, enjoyable, full of outstanding content, and user-friendly. The team behind Tunefruit is stylish, engaging, and collaborative, making it easy for users to navigate. In essence, we provide trendy music to trendy individuals for innovative projects. Additionally, Tunefruit is committed to supporting our artists by sharing 50% of all revenue generated. Our mission is to create a thriving community of creators and users who appreciate quality music.

Welcome to the premier solution for effective management of care homes. Each care home operates differently, and we recognize this reality. CoolCare4 has been crafted by specialists who comprehend the specific software needs of care home operators. Consequently, our platform is user-friendly and designed with practical features that integrate effortlessly into your care home's daily operations. The software encompasses all essential elements of care home administration, including occupancy tracking, time management, scheduling, and invoicing functionalities—CoolCare handles it all. Ensuring accurate staff payments is crucial for maintaining healthy cash flow, and CoolCare4 enables you to evaluate worked hours against established budgets, adjust clock-in records, incorporate additional hours, and monitor any modifications to payroll. We are aware that care homes work with tight budgets, necessitating meticulous management of both expenditures and income. Therefore, a fundamental aspect of effective financial oversight in care homes is guaranteeing that your spending aligns with your needs and that your billing is precise. Additionally, CoolCare4's reporting capabilities provide valuable insights, enabling proactive decision-making that enhances overall operational efficiency.

JSCAST® casting simulation, now available in Turkey, delivers the most accurate results for various casting techniques, including sand casting, pressure die casting, investment casting, lost foam, and tilt casting. This innovative tool ensures your casting success with its verified performance. With JSCAST®, you can utilize all the processors on your computer (CPU) without incurring extra costs. Our established methods for casting and process design incorporate both new techniques and traditional principles, providing the competitive edge necessary in the modern global marketplace. When utilizing JSCAST® for your designs, you will create castings with precise geometries that optimize the flow of liquid metal and strategically position runners, gates, overflows, and cooling lines. Furthermore, if necessary, you can incorporate features like squeeze pins, vacuum channels, vent holes, and chillers in iron casting. By making informed decisions from the outset, you will enhance your profitability and effectiveness in production. Ultimately, JSCAST® empowers you to refine your casting processes for maximum efficiency and success.

RunSmart offers an intelligent solution for overseeing data center operations while enhancing performance outcomes. With its enterprise support, RunSmart ensures clarity in crucial metrics such as utilization, costs, health, and the sustainability of your global infrastructure. You can eliminate excess information by utilizing integrated views of your DataCenters, SmartCity, or entire Enterprise. The platform's efficient data delivery and automated management empower data center operations to achieve optimization levels typically reserved for cloud environments. Built on a contemporary, distributed architecture, RunSmart is tailored for user customization and future technological adaptability. Users can securely and safely oversee, monitor, and manage the essential components of their infrastructure from any location at any time, all from a unified console with RunSmart Enterprise Data Center Monitoring, covering Mechanical, Electrical, and Thermal aspects. This comprehensive approach not only enhances operational efficiency but also prepares businesses for future challenges in infrastructure management.

SES serves as an innovative self-learning engine that employs data mining analytics to forecast traffic demands. By integrating these predictions with real-time network feedback, it assesses the necessary capacity to meet anticipated traffic levels. Subsequently, SES scrutinizes the performance of operational base stations, deactivating those that are unlikely to be utilized, which helps to lower energy consumption. The distinctiveness of SES lies in its capability to comprehend the dynamics between subscriber demand and capacity supply, allowing for real-time adjustments to optimize this supply and enhance user satisfaction while simultaneously decreasing energy costs. This groundbreaking technology, patented by eVolution Networks, transforms traditional network management from a static and inefficient model to a more flexible and responsive one. As a result, SES empowers network operators to accurately align the actual network load with their operational needs, ensuring that energy and financial resources are utilized only when necessary, ultimately leading to a more efficient and sustainable network management system.

TensorWave is a cloud platform designed for AI and high-performance computing (HPC), exclusively utilizing AMD Instinct Series GPUs to ensure optimal performance. It features a high-bandwidth and memory-optimized infrastructure that seamlessly scales to accommodate even the most rigorous training or inference tasks. Users can access AMD’s leading GPUs in mere seconds, including advanced models like the MI300X and MI325X, renowned for their exceptional memory capacity and bandwidth, boasting up to 256GB of HBM3E and supporting speeds of 6.0TB/s. Additionally, TensorWave's architecture is equipped with UEC-ready functionalities that enhance the next generation of Ethernet for AI and HPC networking, as well as direct liquid cooling systems that significantly reduce total cost of ownership, achieving energy cost savings of up to 51% in data centers. The platform also incorporates high-speed network storage, which provides transformative performance, security, and scalability for AI workflows. Furthermore, it ensures seamless integration with a variety of tools and platforms, accommodating various models and libraries to enhance user experience. TensorWave stands out for its commitment to performance and efficiency in the evolving landscape of AI technology.

Simufact Welding is a versatile product line that delivers extensive capabilities for simulating the elastic-plastic behavior of materials alongside structural welding processes. This software encompasses a variety of welding techniques, enabling users to model and simulate numerous thermal joining methods, including conventional arc and beam welding as well as brazing. Furthermore, it allows for the modeling of heat treatment processes, variations in cooling and unclamping setups, and the mechanical loading of welded structures. It is essential to identify critical distortions related to assembly, bulging, imbalances, and clearances during the simulation process. Users can also explore and enhance clamping tools before making any financial commitments to tool investments. This software aids in determining the most effective welding directions and sequences, ultimately leading to improved welding outcomes and more efficient production processes. Additionally, it supports engineers in refining their designs for optimal performance and reliability.

The AS400 Spool File Converter (IBM i) is designed to transform AS400 spool and database files into various formats such as PDF, Excel, CSV, XML, and HTML. CoolSpools serves as a comprehensive information management tool for AS400 (IBM i / iSeries), offering a robust spool file conversion solution along with management and distribution capabilities across multiple formats. By utilizing CoolSpools, you can ensure that your users and clients receive valuable reports promptly, while also delivering them in the most suitable formats for their needs. This versatility enhances communication and data accessibility, making it an essential tool for efficient information management.