Alternatives to CircuitLab

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

PathWave ADS provides integrated design guidance via templates to make it easier to get started. It is easy to find the part that you need with the extensive component libraries. Automatic sync allows you to visualize the physical layout and create schematic designs. Data allows teams to visualize whether their designs are meeting specifications. PathWave ADS's data display and analytics capabilities produce graphs, charts and diagrams that will give you design confidence. With wizards, templates, and design guides, you can quickly accelerate your design. The entire design flow includes schematic, layout and circuit. As frequency and speed increase on printed circuit boards (PCBs), signal and power integrity become more important. Electronic device failures can be caused by transmission line effects. To simulate the board accurately, it is necessary to model vias, traces, and interconnects.

One animated circuit is equivalent to a thousand equations or diagrams. The schematic is accompanied by animations of voltages and currents. This gives a great insight into the operation of the circuit. The real-time simulation engine was custom-built to be fast and interactive. Simulate everything from simple logic gates and resistors to complex transistor-level designs and mixed-signal circuits with just one click. You can adjust potentiometers and LED current-limiting resistors while the simulation is running. Your changes will be reflected in real-time. The mini-waveforms that appear on top of the schematic wires are different for digital and analogue signals. Digital wires are color coded, while constant analog voltages are shown in numbers. In the XY mode, any pair of time domain signals can be plotted. The grid ticks and oscilloscope scale are automatically updated to convenient values when the data changes.

It allows you to design and test circuits in a flexible way, allowing you to try all "what if" scenarios. You don't have to worry about faulty components or bad connections. CircuitLogix supports mixed-signal, analog, and digital circuits. Its proven SPICE simulation provides accurate results that you can trust. 3DLab, which is included in both versions of CircuitLogix, is a virtual reality lab environment that is designed to closely mimic the appearance and functionality actual devices and instruments. 3DLab includes approximately 30 different devices, including switches, meters and lamps, as well as resistors, capacitors, inductors and fuses.

TopSpice is a true analog/digital/behavioral mixed-mode circuit simulator for the PC. It is the most advanced SPICE simulation in its price range. It also offers compatibility, an integrated design environment that is easy to use, from schematic capture to graphic waveform analysis. TopSpice allows you to design using either text netlists (SPICE) or schematic drawings. All design and simulation features are available in either the schematic editor or netlist editor. TopSpice comes with a full-featured mixed mode mixed-signal simulator that can simulate circuits containing any combination of analog devices and digital functions, as well as high-level behavioral block. TopSpice allows you to verify and optimize the design of your system down to the transistor.

The graphical interface of the schematic capture tool allows you to explore schematics, produce simulation results and further explore them through the waveform viewer. The speed at which you can grasp the circuit, its correctness and its limitations is crucial to circuit design. LTspice is faster than many other simulation tools, and allows you to iterate designs in a short time. The keyboard shortcuts in LTspice are a quick and easy way to access commands that you would normally only be able to access by clicking on the menu or toolbar. Our vast collection of technical resources covers a wide range LTspice-related topics. Learn how to add third-party model, work with symbols and more.

Our online circuit simulation bridges the gap between theory, and practice through an intuitive interface. It allows you design, simulate and share electronic circuits, while observing the interaction of components in real time. Directly manipulating the behavior of circuits makes learning more engaging. DCACLab is a powerful tool for educators. It enhances their lessons with interactive diagrams, live demonstrations, and video. Students can experiment and learn in a safe environment, which will lead to a better understanding of electronics. DCACLab turns frustration into hands-on understanding and learning. Discover the power of an interactive multimeter. It provides a realistic and enriching learning experience with its functions to measure ohms, voltages, and resistances. With ease and understanding, dive into the world of electronic.

The Electromagnetic simulation (EM) gives you insight before physical prototyping. You can customize EM simulations to increase speed and accuracy. Integrate EM analysis into your circuit simulations. EM simulations can take several hours to run. Integrating your EM simulation software and PathWave circuit design software can reduce import and export times. To maximize efficiency, integrate EM analysis and circuit simulations. 3D EM solid modeling environment to create arbitrary 3D objects or import existing 3D models from other CAD settings. Prerequisite to prepare a 3D geometry for 3DEM simulation. This includes defining ports, boundary conditions, and material properties. 3D EM solid modeling and Finite Difference Time Domain simulator. Compliance testing for Specific Absorption Rates (SAR) or Hearing Aid Compatibility.

Synopsys HSPICE circuit sim is the industry's standard for circuit simulation. It features foundry-certified MOS model models with state of the art simulation and analysis algorithms. HSPICE, with over 25 years of success in design tape outs and a comprehensive circuit simulator, is the industry's most trusted. On-chip simulation: analog designs, RF, custom digital, standard cell design and character, memory design and characterisation, device model development. For off-chip signal integrity simulation, silicon-to-package-to-board-to-backplane analysis and simulation. HSPICE is a key component of Synopsys analog/mixed signal (AMS) verification suite. It addresses the most important issues in AMS verification. HSPICE is the industry's standard for circuit simulation accuracy and offers MOS device models that have been foundry-certified. It also includes state-of-the art simulation and analysis algorithms.

The Allegro PSpice System Designer uses core Cadence PSpice technology to provide fast and accurate simulations. This package provides utilities for sensitivity analysis and goal-based multiparameter optimization, component stress, reliability analysis, and Monte Carlo analysis to estimate yield. Parametric plotter analyzes interdependence between parameters and converts simulation data to meaningful results. Allegro Design Entry HDL can be used to generate schematics that can be used to drive PCB layout. This will reduce design time and eliminate redrawing errors. It has a large collection of models and behavioral modeling techniques that make it easy to refine the analog/digital interface. Analog and mixed-signal designs can be analysed quickly and accurately. PSpice technology is used at the core to perform fast and accurate simulations.

You can learn electronics by using the examples in PROTO application and trying out many components. You can use transistors, diodes and resistors. You can easily analyze signals using a channel oscilloscope. During simulation you can check voltages and currents as well as many other variables. Check signals using the multichannel oscilloscope, and tune your circuits in real-time. Our app will help you with your Raspberry Pi or Arduino project. You can use PROTO to simulate logic circuits and perform digital electronics analysis.

Multisim™, a software that integrates industry-standard spice simulation with an interactive schematic environment, allows you to instantly visualize and analyze electronic circuit behavior. Its intuitive interface allows teachers to reinforce circuit theory and improve theory retention throughout their engineering curriculum. Multisim™, which adds powerful circuit simulation and analysis into the design flow, helps researchers and designers decrease iterations and save development costs. Multisim™, for Education, is circuit teaching software for power electronics courses and labs. Multisim™, provides engineers with the SPICE simulation and analysis tools and PCB design tools to quickly iterate on designs, improve prototype performance, and speed up prototyping.

The MPLAB®, Mindi™, Analog Simulator reduces design time and design risks by simulating analog circuits before hardware prototyping. The simulation tool uses a SIMetrix/SIMPLIS simulation platform, which allows for the use of SPICE and piecewise linear modeling. This simulation environment can be used to simulate a wide range of simulation requirements. This simulation interface can be paired with Microchip's proprietary model files to model specific Microchip components as well as generic circuit devices. This simulation tool runs locally on your computer. The simulation tool is free to download and does not require an Internet connection. Also, the simulation run time does not depend on remote servers. The simulation results are fast and accurate. The simulation tool can be run directly on your PC.

Ansys Exalto, a post-LVS RLCk extractor software solution, allows IC designers to capture unknown crosstalk between different blocks in their design hierarchy. It extracts lumped-element parasitics from the design hierarchy and generates an accurate model for electrical and magnetic coupling. Exalto interfaces well with most LVS tools, and can be used in conjunction with the RC extraction tool you choose. Ansys Exalto post LVS RLCk extraction allows IC designers to accurately predict electromagnetic and substrate-coupling effects for signoff on circuits previously "too large to analyze." The extracted models can be back-annotated to any schematic or netlist and support all circuit simulators. Modern silicon systems have seen a rise in RF and high speed circuits. This has made electromagnetic coupling a first-order effect that must be accurately modelled to ensure silicon success.

TINACloud is a cloud-based, multi-language version of TINA that runs in your browser. It can be accessed from anywhere in the world. TINACloud is available for a fraction the price of TINA. If you buy a license to download TINA, we offer a special bundle that includes TINACloud and all new private licenses. This page is dedicated exclusively to TINACloud. Click here for more information about the TINA offline software that you can download and install on your computer. TINACloud is a powerful online circuit simulator that can be used to analyze and design analog, digital, VHDL and mixed electronic circuits. It also allows you to test microcontroller applications and RF, communication and optoelectronic devices.

There are many circuit simulators on the market. Just look at their ads: industry standard, high performance, fast, and extremely fast. SPICE), easy-to-use, highly intuitive. Try it out yourself to see if the tool is worth your time. Many NL5 users have already done this. I hope they'll share their inspiring stories soon. What can you expect from NL5? It is neither a replacement for SPICE nor a new SPICE. NL5 is superior for some tasks, good for others, and not suitable for some.

It is based upon a complete representation for the qubit state, but avoids the explicit representation in terms of matrices of gates and other quantum operation. Intel-QS uses the MPI (message-passing-interface) protocol to handle communication between the distributed resources used to store and manipulate quantum states. Intel-QS is built as a library that, when linked to an application program, allows the user to benefit from the high-performance implementations of circuit simulations. The library can run on a wide range of systems, including laptops and HPC server systems.

It is a full-featured, accurate design environment that combines speed and accuracy. It can simulate power supply designs 10-50x faster than SPICE. SIMetrix Classic has all the features and uses the same GUI, including its hierarchical diagram editor and waveform view. Locates the steady-state operating point of a switch system without having the transient startup conditions simulated. Conversion of SPICE transistors and diodes to SIMPLIS format. Converts SPICE by running a SPICE Simulation to extract parameters. The advanced digital library includes a variety of digital functions, such as counters ADCs DACs.

Pharos combines Ansys’ unparalleled EM engine power with a proprietary circuit simulation engine to perform coupling analysis. It also provides a ranking of potential EM-crosstalk aggressors per victim. Designers can identify the most vulnerable nets to help them make design decisions that will manage EM crosstalk and reduce risk. Pharos combines an unparalleled extraction engine power with a built in simulation engine to perform EM analysis. It also ranks potential EM crosstalk aggressors per victim network. This allows designers to concentrate on the most important nets in the design. It is difficult, if not impossible to identify all EM crosstalk vulnerable victim/aggressor net pair due to increasing design complexity and the wide range of magnetic field interference.

EAGLE (electronic design automation) software allows printed circuit board (PCB), designers to seamlessly connect schematic diagrams and component placement. It also includes comprehensive library content. EAGLE offers a variety of PCB layout tools that will help you bring your design to life. Drag and drop reusable blocks between your projects. To ensure your schematic stays on track, validate your design using a complete set electronic rule checks. All changes are automatically synchronized between your layout and schematic, so you can concentrate on the creative process. You can control your design flow and avoid any unexpected surprises by using fully customizable PCB design rules. You can rest assured that your next design will be completed with worry-free libraries. Our growing catalog allows you to find and place parts dynamically.

Today's companies are faced with complex design challenges as well as tight budgets. eCADSTAR is much more than a PCB layout software. It includes simulation, 3D MCAD integration and wire harness support. All built on the most recent technology to provide enterprise-level performance at a reasonable cost. eCADSTAR's intuitive UI makes it a compelling choice for designers. eCADSTAR's design capabilities can be leveraged to simplify and accelerate your design process. The digitally connected library, intuitive schematic capture and tools to accelerate PCB Layout Engineering allow engineers to spend less time manipulating the tool, and more time doing what they love: innovating creative solutions for today’s technological challenges. The test plan is one of the most tedious parts of the design process. Without adequate upfront simulation, validation can be expensive in both time and money. eCADSTAR's capabilities for Spice simulation and SI/PI analysis deliver test cycle time reductions.

The schematic editor allows you to create unlimited designs. There are no paywalls for unlocking features. A built-in schematic editor and an official library of schematic symbols will help you quickly get started with your designs. Professional PCB layouts can be made with up to 32 copper layers. KiCad now includes a push-and-pull router that can route differential pairs and adjust trace lengths interactively. KiCad also includes a 3D viewer that you can use to view your design in an interactive canvas. To inspect details that are difficult or impossible to see in a 2D view, you can rotate and pan around. Multiple rendering options make it possible to change the board's aesthetic or hide and show certain features. The schematic capture in KiCad is fast and efficient. It also includes all the tools necessary to do so. The interface is focused on productivity. As large designs can be broken into hierarchical subsheets, there are no limits to their complexity.

TINA-TI offers all the traditional DC, transient, and frequency domain analyses of SPICE plus much more. TINA's extensive post-processing capabilities allow you to format the results in any way you like. Virtual instruments let you select input waveforms, and probe circuit nodes voltages and waveforms. TINA's Schematic Capture is a quick and easy way to get started. TINA-TI requires around 500MB. It is easy to install and can be uninstalled if desired. We bet you won't. TINA is a Texas Instruments-exclusive product from DesignSoft. This complimentary version is fully-functional but does not include some of the features that are available in the full version.

Multiphysics software from COMSOL allows you to simulate real-world designs, processes, and devices. Multipurpose simulation software that uses advanced numerical methods. Fully coupled multiphysics and single physics modeling capabilities. The entire modeling process, from geometry to postprocessing. Easy-to-use tools for creating and deploying simulation applications. The COMSOL Multiphysics® software provides a consistent user interface regardless of engineering application or physics phenomena. Add-on modules offer specialized functionality for electromagnetics and structural mechanics. You can choose from a variety of LiveLink™, products to interface with CAD or other third-party software. COMSOL Server™ and COMSOL Compiler™, allow you to deploy simulation applications. This software platform allows you to create simulation applications and physics-based models.

Electronic designs are becoming more complex, making them harder to detect errors. These errors can result in high costs and hundreds or hours of work. It is important to detect these errors early on in order to prevent damage. In many cases, these mistakes are only discovered during the testing phase or on the customer's premises. BQR CircuitHawk, a unique and powerful (patent-based) tool for electrical circuit stress analysis and design error detection is available. CircuitHawk detects errors in the design phase before layout and production. So, during the final verification, no errors in schematics, connectivity, or stress are detected. CircuitHawk reduces design cycles and the time to market. This saves money and improves corporate reputation. CircuitHawk integrates design error detection, thermal, MTBF, and service life predictions at the schematic level before PCB layout and manufacturing.

Simulink allows you to simulate your system before you move on to hardware. You can explore and implement designs you wouldn't normally consider without having to code C, C++, or HDL code. You can explore a wide range of design options by modeling the system under testing and the physical plant. To simulate the behavior of all components of the system, your entire team can use a multi-domain environment. Your simulations can be packaged and shared with clients, suppliers, or collaborators. You can reduce the cost of prototypes by testing your system in conditions that are too risky or too time-consuming. Rapid prototyping and hardware-in-the loop testing can validate your design. You can trace your design from requirements to code. Instead of writing thousands upon lines of code manually, generate high-quality C or HDL code automatically. This code behaves in the same way that Simulink's model. You can then deploy it directly to your embedded processor or FPGA/ASIC.

Since over 25 years, PSIM has been the leading simulation and design software in power electronics and motor drives. PSIM's intuitive, user-friendly GUI and robust simulation engine are the perfect solution for users to meet their simulation and design requirements. PSIM can perform quick power converter losses calculations, motor drive efficiency calculation, conducted EMI analysis and analog/digital controls. PSIM offers automatic embedded code for rapid control prototyping. With PSIM's Design Suites, users are able to design power supplies, electromagnetic (EMI) filters and motor drive systems quickly.

CoPlot Version 6.45 can be used to create publication-quality 2D or 3D scientific graphs. These graphs plot data and equations, maps, and technical drawings. CoPlot was designed with one goal in mind: to make a program so flexible that engineers and scientists can get exactly what they need. CoPlot also includes CoStat, which is used to handle data and provide statistics. CoPlot's flexible drawing objects allow you to create precise technical drawings. CoPlot is great for creating field maps, genetic maps, flow charts and chemical structures. Check out the samples. Text in graphs and drawing objects can include HTML-like text formatting tags, and over 1000 special characters. Create amazing scientific graphs and maps. CoPlot offers seven types of graphs, more than 40 ways to plot data, 18 ways for equations to be plotted, flexible attributes, asymmetrical and horizontal error bars, 12 axis types, and many other features.

Fusion 360 brings together design, engineering, electronics and manufacturing in one software platform. Get integrated CAD, CAM, CAE & PCB on a single development platform. EAGLE Premium, HSMWorks and Team Participant are also included. You also have access to consumptive services such as cloud simulation, generative design, and cloud rendering. A comprehensive range of modeling tools is available to help you design products. You can ensure the form, fit and function of your products using a variety of analysis methods. You can create and edit sketches using sketch constraints, dimensions, as well as a powerful suite if sketch tools. Edit and repair imported geometry from non native file formats. You can make design changes without worrying too much about time-based features. Edit complex parametric surfaces to repair, patch or design geometry. You can create history-based features such as extrude, revolve and loft that are updated with design changes.

Proteus was developed back in the days MS-DOS. After 30 years of continuous development, we are proud to present one of the most efficient and cost-effective PCB tools available. Our philosophy has been to continuously improve and innovate. This resulted in a modern software suite that is packed with powerful, time-saving features that will help you design PCBs more quickly. Proteus purchase is just the beginning of a long-lasting business relationship. A world-class technical support service is included in the price of the software. Each professional purchase will be assigned a member of our team as your technical support contact. This allows you to easily ask questions and get direct access to Labcenter support. Although we may not be able solve all your problems immediately, we will do our best. Our success is due to our customers.

Over 1 million real-time updated parts have been created. This allows you to focus on the design and you can also create or import your common libraries. EasyEDA, China's largest distributor of electronic components, supports direct links to more that 200,000 in-stock components at LCSC. Designers have access to stock, prices, and orders at any stage of design. It offers the same features as the online version but has more design areas. We have made many improvements to the product, so we recommend it. It is easy to use. You can use it faster if you have previously used other PCB tools. You can design faster, lighter, and less resource-hungry. Register and log in to use the service, there is no activation required. Local backup automatically with document retrieval at any time. You will also have backups on the cloud server. This doubles your data security.

Beyond traditional RF simulation, design, analyze, verify radio frequency integrated circuits. Design and verification can be done with confidence using both nonlinear and steady-state solvers. Complex RFICs can be validated faster using wireless standard libraries. Verification of IC specifications via RF simulation must be done before taping out an RFIC. Simulators can simulate the effects of layout parasitics, complex modulated signal, and digital control circuitry. PathWave RFIC Design allows you to simulate in both frequency and time domains and can bring your designs to Cadence Virtuoso. Simulate components on silicon chips accurately. Optimize designs using sweeps and load-pull analysis. Incorporate RF designs into the Cadence Virtuoso environment. Performance can be increased with Monte Carlo and yield analysis. Safe operating area warnings simplify debugging. Use the most recent foundry technology right away.

This tool can be used to explore end-to-end signal or power topologies. It also allows you to perform signal-integrity and transient power-integrity analysis together. Also, you can include complex interconnect models and connect them to a single driver/receiver/discreet symbol that automatically replicates the circuit for each of the ports on the interconnect model. This solution targets source-synchronous parallel interfaces, such as DDRx memory designs. You can start with models that are quickly generated, connected, and pre-layout capabilities (including via wizard). As the design becomes more refined, you can swap in more detailed models to reflect actual hardware behavior. Concurrent simulation accounts the effects of conductor and dielectric losses, reflections and inter-symbol interferences (ISI), crosstalk and simultaneous switching noise.

LigPlot+, a successor to the original LIGPLOT program, allows for automatic generation of 2D interaction diagrams between ligands and proteins. It runs from a simple java interface that allows for easy editing of plots by using mouse click-and drag operations. The program has many major improvements over the previous version, in addition to the new interface. LigPlot+ automatically displays interaction diagrams when two or more ligand protein complexes are sufficiently close. Any conserved interactions will be highlighted. LigPlot+ now includes the updated DIMPLOT program to plot protein-protein and domain-domain interactions. DIMPLOT will generate a diagram showing residue-residue interactions across an interface. Users can select the interface they are interested in. Optionally, residues from one interface can be displayed in sequence to aid in interpretation.

You can go beyond math-based modeling by using a complete RF-aware design process. This workflow includes decades of Keysight measurement science in RF instruments, which is available for all system architects. PathWave System Design is the best platform for prototyping complex RF systems. It offers faster simulation speeds, near-circuit fidelity and libraries for radar, electronic warfare satellite, 5G and WiFi. Plus, it integrates with many partners. Your system designs can only be improved by statistical models for propagation or channels. With the help of tools like STK by AGI, Ansys Company, dynamic kinematic modeling is possible for electronic warfare, radar, satellite, 5G and automotive. Trusted reference libraries based on Keysight measurement science are essential for advanced cellular system designers. Researchers working on the next generation communications signals require a flexible platform to develop and test physical layers.

5 modules, RMS compressor, peak limiter, high-frequency limiter, clipper, true peak limiter. High-quality signal processing for mastering purposes. Brickwall and soft-limiting with different timing settings. M/S and multiband modes, optional 4-x oversampling. True inter-sample peak (ISP) limiting. Analog-style indicator, 2 different GUIs. Analog-style indicators can be used to indicate the signal limiting level in the corresponding module. Indicator scales are shown in dB format. The rightmost position is 0 dB signal limiting. Some host applications may have problems with the mouse wheel being used to change parameters. For Windows, the plugin window must be activated in order to use it. Click on the window header or any point in the background of the plugin to activate the window.

Eaton's easySoft software can be used to program easy controllers or displays. The software allows for circuit diagram input and editing, and can display the diagrams in the format desired. A built-in offline simulation tool allows users the ability to test a circuit before it is put into service. It is used by users who are programming, configuring, and defining parameters. It also creates visualization functions for MFD displays. Existing programs created with the previous series (easy500/700/800), can be easily transferred to the easyE4 PCL with automatic conversions of visualizations using easySoft 7. Eaton's goal to improve your product knowledge, troubleshooting skills and safe operation of machinery control products is to help you. Eaton offers a variety of self-guided, instructor-led, and eLearning training options to suit your individual needs.

MantiumFlow can be used in a command-line mode. The user needs to provide the case location and select the template he would like to use. MantiumFlow will create the instance and notify the user about any issues or signal success. This is the fastest way of creating many cases. MantiumFlow's GUI makes it easier to use. The user can click through the options, and see a list of settings that he can change if he wishes. The GUI makes it easier to see all imported CAD files, which aids in ensuring that all parts are correctly placed. MantiumFlow was designed for simulations of incompressible aerodynamics. A report is generated with plots showing convergence, forces, and many visualizations of flow field. MantiumFlow automatically creates a mesh with a certain amount of automatic refinement area selection. Rotating geometry can also be modelled by applying a rotating wall boundary condition to those walls.

You can either choose an existing power solution, or you can create a new design. You will also find schematics and component lists. You can view or modify your selection and export the design files to MPLAB® Mindi™, Analog Simulator, for analysis and verification. Need help calculating your signal-chain noise budget? The signal chain signal to noise calculator tool allows you to perform a complete analysis of your signal chains. It is intuitive, flexible, and easy to use. The interface is simple and requires very little data inputs. Integrated design generators are used to create new power designs and refine existing designs. It is easy to switch from selecting the power solution to verifying the design. No software download is required to use the online signal chain signal-to noise calculator.

PSD is a Windows program for processing seismological data. The software allows you to read and process event (.EVT), files in various versions (up to 1.50). This makes it easy to evaluate the quality of the data acquired. The PSD software package was designed to allow users to perform frequency analysis on the signals. The software can accept an EVT file as an input file and performs these functions: Signal/Noise Ratio uses the first 1024 signals as noise and the 1024 signals starting at the trigger point as the signal. The one-sided auto spectrum density function is used to calculate Power Spectral Density. The user can set parameters such as corner filter, order filter and overlapping window.

Circuit can be exported into multiple quantum programming languages/frameworks, and can be run on different simulators and quantum computer. Drag & Drop user interface allows you to assemble circuit diagrams that automatically translate to code. You can also type code to update the diagram. QPS Client runs on your local machine or in the cloud where your quantum programming environment has been installed. It opens a websocket secure connection with Quantum Programming Studio Server and executes quantum networks (that you designed in the web interface) on your local simulation or on a quantum computer.

To get intraday, short-term, and long-term ideas, scan for buy/sell signals across multiple timeframes. Expert advisors and integrated technicals & foundations assist in making better decisions. Auto-trendlines are plotted automatically to identify uptrends/downtrends, and trendline breakouts. The supply/demand zones are automatically plotted in charts and used for scanning for supply/demand zone breakouts. You can use the same interface on mobile and desktop with one-click sync of data and watchlists. 65+ technical indicators, 35+ drawings tools, 6-window charts layouts with stock or view sync modes and 190+ technical and fundamental scans auto-updating intraday scanners with alerts. Multi-timeframe scans, custom timeframes. Trade directly from the software. Available with 1-min or 5-min real-time data. Since 13 years, we have been providing exceptional service to our customers.

Drag and drop from the many built-in and expandable model libraries allows you to build multidomain, industrial-strength models of your entire system. The Wolfram Language provides a powerful environment for quickly understanding, analyzing and iterating on system designs. Creating insight, innovation, and results. Real-world machines, systems, and networks are not limited to one physical domain. Models can include any combination of interconnected components from any number domains, mimicking real-world topology. Exploration is quick and easy. All values can be accessed from any component of your model with a click. Zoom in on a specific area of interest to see the built-in plot styles. Access the full model equations, and simulation results of your models to perform your own symbolic and numeric computations. Your model analysis will benefit from the full power and flexibility of Wolfram Language.

Find the function you are looking for and use it in a similar manner. Instantly load a bunch of DWG files. DWG FastView Plus is lightweight and super-fast. You can use viewing tools such as zoom, pan, 3D Orbit, and magnifier. This will make it easy to view drawings. Quickly display the horizontal and vertical linear measurements of closed objects. You can quickly control drawing layers and external references, manage object properties through palettes, and search text faster. To add accuracy to your drawing design, use standard dimensioning tools. You can only change between the standard drawing units that are used for measurement and dimensioning. With one click, convert several DWG files to an older version or the current version. Once you are done drawing, you can plot it to a plotter or printer.

With powerful optimization tools and fast simulation, analyze RF and microwave systems. Automatic circuit synthesis technology allows you to explore performance trade-offs. PathWaveRF Synthesis (Genesys), provides basic functionality that is suitable for all RF and microwave circuit board and subsystem designers. PathWave Circuit Design allows you to identify RF design mistakes that are not obvious from spreadsheet calculations. This entry-level environment includes circuit, system and electromagnetic simulators. It will give you confidence in your design reviews prior to hardware realization. You can see your matching network being synthesized and optimized in just a few mouse clicks. Transfer the design to PathWave Advanced Designer System (ADS), and it will be included in a more complicated design.

Multipurpose, full-wave 3D electromagnetic (EM), simulation software for designing, simulating and optimizing high-frequency electronic products, such as antennas, components and interconnects. Ansys HFSS 3D electromagnetic (EM), simulation software is used to design and simulate high-frequency electronic products, such as antennas and antenna arrays, RF and microwave components, high speed interconnects and filters, connectors and IC packages. Ansys HFSS software is used by engineers around the world to design high-frequency, fast electronics for communication systems, advanced driver assistance system (ADAS), satellites, IoT products, and other areas. Engineers can address complex EMI, RF, microwave, IC and PCB problems with HFSS's unmatched capability. Ansys HFSS simulation suite includes a wide range of solvers that can be used to solve diverse electromagnetic problems.

With an industry-specific toolkit for electrical design, you can efficiently create, modify, or document electrical controls systems. Create and update custom reports. DWG™, drawings can be easily shared with stakeholders. You can organize and reorder files in folders for electrical drafting projects. Multipage PDFs can be used to publish schematics. Automated numbers for wires, tags and components reduce errors Use Circuit Builder for simple electrical design. Choose from a wide range of electrical symbols. Catch problems before they become serious. Keep track of parent/child contact information in real-time. Define the I/O assignments for a project. Enhanced preview and direct component insert. Inventor integrates mechatronics solutions. Cross-referencing coil and contacts, PLC I/O drawings derived from spreadsheets, catalog browser to parts, real-time errors checking, electrical schematic symbols libraries, circuit design, reuse, wire numbering and component tagging and many more.

IAutoDraw is an all-in-one software that can be used for data monitoring and simulation, domestic office business drawing as well as data monitoring. It is based upon process drawing components. It integrates tree components as well as Gantt chart, mathematical curve, and surface components. It has a real-time data connection direct, dynamic simulation scripts and other functions. It is a multifunctional software that can be used for basic office process drawing, monitoring industrial data, simulation of process models, and many other fields. It is widely used by various industries in the design of systems, processes, topology, project schedule scheduling and tree hierarchical structure relationships.

This software package includes crosshole survey design and model building and modeling, data transformation, CDP transformations, tomography, wave equation migration and post-processing. It provides all the capabilities you need to complete a crosshole seismic project. The model includes P- and A-wave velocities and densities as well as anisotropic parameters. Create an arbitrary velocity model with layers, objects, faults, and other elements. Full wavefield simulation using an anisotropic finite difference method.

Ansys Maxwell solves EM fields for electric machines, transformers and wireless charging. It also works with actuators, permanent magnet latches and other electrmechanical devices. It can solve static, frequency-domain, and time-varying electric fields. Maxwell also offers specialized interfaces for power converters and electric machines. Maxwell allows you to precisely characterize the transient, nonlinear motion of electromechanical components as well as their effects on the drive circuit design and control system design. Maxwell's electromagnetic field solvers can be seamlessly linked to the integrated circuit or systems simulation technology to enable you to understand the performance of electromechanical system before you build a prototype in hardware. Maxwell provides a reliable simulation of low-frequency electromagnetic field in industrial components.