Alternatives to Aspen GeoDepth

The g-Platform: Depth Imaging covers all processing modules, applications and tools needed to build velocity models and create an accurate depth picture from any type of seismic data.

g-Platform: VSP gives processors an interactive and graphic experience when working with VSP data. These VSP processing packages cover 2D/3D VSP geometries and modules, as well as applications.

Geomage G-Space™, a complete structural interpretation software, allows for a thorough analysis of seismic and well data. Geomage G-Space™, software allows: Horizon and Fault Picking - Geological modeling - Map creation with errors - Well-tie with dynamic update Well, correlation - Mis-tie workflow - Model of velocity based on checkshots, horizons and angular distance - Simultaneous depth/time picking Static modeling Volumetric Calculation - etc, etc, etc and more...

Advanced seismic processing and imaging can condition data for depth imaging and interpretation. Companies can configure the system to meet their business objectives and user needs through modular design, open architecture, and compliance to standards. The most advanced seismic processing and imaging solutions available, including SRMA and 5D interpolation and Aspen Echos RTM. A library of over 350 modules that allows the construction of data-dependent processing workflows to solve current geophysical challenges. The industry's best interactive link between data, seismic applications, and parameters. Aspen Echos is the standard seismic processing system in the oil and gas industry for producing 2D and 3-D seismic images of subsurface.

Comprehensive seismic processing and QC software to process data acquired on-shore, offshore, or in a vertical seismic profile. VISTA desktop seismic processing software allows data processing from the early stages of acquisition QC to the final processing and interpretation 2D and 3-D seismic data acquired either onshore or on land. It also supports vertical seismic profiles (VSP) in all industry data formats. VISTA software makes it easy to navigate workflows and evaluate datasets with the interlinked and interactive displays. You can also add your own algorithms via the MATLAB SDK or C++ interface. Advanced processing capabilities are supported by the software, including AVO and angle analysis (AVA), multicomponent processing, 2D and 3D VSP processing, and AVO and angle of incidence analysis (AVA). Advanced field package, including full geometry QC and post-stack migration. The complete solution, including QC, prestack migration and time depth image analysis.

PaleoScan is a seismic interpretation software based on a semi-automated approach that produces chrono-stratigraphically consistent geological models. This unique technology was patented in 2009. It allows our clients' seismic interpretation cycles to be accelerated, to scan the subsurface real-time to identify high-potential zones, and to identify hydrocarbon storage or accumulation areas. PaleoScan's ability to create a 3D geological cube of the entire seismic data allows for the visualization and interpretation, as well as the subsurface layers, up to the seabed. This is important in establishing a reliable ranking, taking into account the risks associated with gas injection, of storage reservoirs. Our revolutionary technology, which combines powerful algorithms, computing power, and data analyses, takes your seismic interpretation to a new level.

GeoThrust was designed with a workflow architecture in mind to produce an accurate earth model and image in time and depth from data that has been collected with irregular geometry in areas of complex topography, complex near surface, and complex subsurface. It is easy to learn and simple to use, with high technical specifications for data analysis. Nonlinear tomography is used to estimate the near-surface model. This accounts for topography and reduces vertical and lateral velocity variations. Wavefield dating is used to correct the near-surface model. This is essential for imaging from irregular topography. GeoThrust does subsurface velocity modeling, imaging, and estimation from topography. It is not based on a flat datum. Instead, it uses rms and interval speeds that are calculated at reflector positions and not at reflection positions.

This software package includes crosshole survey design and model building and modeling, data transformation, CDP transformations, tomography, wave equation migration and post-processing. It provides all the capabilities you need to complete a crosshole seismic project. The model includes P- and A-wave velocities and densities as well as anisotropic parameters. Create an arbitrary velocity model with layers, objects, faults, and other elements. Full wavefield simulation using an anisotropic finite difference method.

TomoPlus is a complete package of near-surface solutions. It's designed to produce an accurate near-surface velocity model and to derive precise long and short wavelength stats solutions to assist seismic data processing. TomoPlus provides both high-end and conventional near-surface refraction solutions for a variety near-surface problems. Conventional approaches can be used to resolve high velocity contrasts in simple situations and offer high resolution solutions. Conventional methods can be used to determine a good initial velocity model in complex areas. High-end imaging technologies such as nonlinear and full waveform tomography or joint traveltime waveformtomography may then be used to resolve additional details. TomoPlus provides advanced near-surface imaging and statics techniques in addition to several robust first-break pickers;

OMNI 3D seismic design software allows you to create optimal 2D or 3D designs for land and marine, ocean-bottom cable, transition zone, vertical seismic profile, and multicomponent surveys. Advanced analysis modules allow you to analyze geometry artifacts, examine geometry effects, generate synthetics, build and ray trace 2D or 3D geological models, and more. OMNI 3D software bridges the gap between E&P asset teams and acquisition teams with its advanced tools, easy-to-use interface and multiproject handling. These features make OMNI 3D software a standard in the industry for geoscientists involved with survey planning, design and QC. Advanced analysis modules include synthetics, 3D geometry assessments, trace quality estimations using 5D interpretation, AVO Response, illumination on a subsurface horizontal using any survey geometry and post-stack time migration illumination via Fresnelzone binning

RokDoc is the culmination of over 20 years of industry experience and innovative research. RokDoc provides a seamless interface that integrates everything from data quality control and modeling and prediction. It also integrates multidisciplinary workflows for Quantitative Interpretation and Pore Pressure. Assess sandstone, carbonate, and shale reservoirs for improved hydrocarbon exploration and production optimization, CO2 sequestration and geothermal surveying. RokDoc offers a comprehensive and extensive library that includes rock physics, cutting-edge seismic inversion techniques, as well as a complete geomechanics solution. Automated and easy evaluation of geological "what-if" scenarios. To better understand the probability and success of subsurface resource exploitation, and stored fluid monitoring, capture uncertainty in data and models.

EarthVision, developed by Dynamic graphics, is a software that allows for the creation and updating of 3D models. It is easy to create accurate maps and cross-sections. Reservoir characterization and volumetric analysis can also be performed. EarthVision's advanced 3D/4D viewers allow for model examination and interrogation within the context of datasets throughout the asset development teams. This improves and simplifies quality control, well-planning, and communication with managers, investors, partners, or other team members. EarthVision's workflow management streamlines the model-building procedure, allowing for complex models to quickly and easily be built through a guided geologically oriented approach. The workflow manager's intuitive interface, which only requires one-time data input, guides users through modeling fluid contact, salt domes and faulted structures.

It takes a lot of work to gather your data. Do not settle for substandard visualization. Surfer's powerful modeling tools allow you to present your data in the best possible way while maintaining precision and accuracy. Surfer makes it easy to communicate information about geology, hydrology and environmental. Surfer's many analysis tools are designed for engineers, geologists, and researchers. They allow you to discover the depths of your data. Adjust gridding and interpolation parameters, assess spatial continuity of data using variograms, determine faults and breaklines, and perform grid calculations such volume, smoothing, filtering, and transformations. Surfer converts your data quickly into knowledge.

GM-SYS can be used to train your earth models. Integrate seismic, well and geology data with observed gravitation and magnetics. International government surveys and exploration programs of the most successful energy companies worldwide trust GM-SYS extensions. Rapidly create new interpretations using the latest survey data. Then, use interactive tools to see if the model's calculated response matches the observed data. All your data can be gathered together to reduce risks when planning expensive surveys and drilling targets. Oasis montaj integrates GM-SYS extensions, allowing you to view your gravity and magnetic data alongside your other earth models. In a seamless workflow, import and integrate grids, slices, numeric data, and other teams' data. You can run efficient QA/QC checks in Oasis montaj, and immediately extract your clean data into GM–SYS to ensure that your model is based upon the most accurate data.

DUG Insight lets you focus on geoscience and help you make your next discovery. DUG Insight, a fully-service interactive software platform, allows you to process advanced seismic data and image, interpret, visualize, and QI--across marine, land, and ocean-bottom survey surveys. DUG's multiparameter FWI imaging is also included for innovative least-squares imaging solutions. DUG Insight is a new approach to geoscience. It combines powerful features with an easy-to use interface. DUG Insight's processing module and imaging module allow you to access a variety of key technologies that will turbocharge your seismic workflows. These technologies include deblending and noise removal, designate, multiplex, data regularisations, imaging, post-migration processing, and data regularisation. DUG Insight's interactive platform and interpretive platform allows you to process your data and meet your OBN, land, and marine processing and imaging requirements.

Multi-survey structural interpretation and visualization is fast and easy. Multiple users can collaborate in one shared environment. Integrated analysis of multi-scale geophysical, seismic and geological data allows for reliable prediction of facies from well data. Comprehensive, integrated solution for seismic interpretation that includes industry-leading facies classifications and volume visualization workflows. Visual integration and interpretation at all scales, from regional to prospect. You can easily share data and projects with other members of your team without duplication. Interactivity and consistency among views speed up the interpretation process. This makes full use of high-speed graphics and large memory, as well as the fast connectivity of modern workstations. The user interface is intuitive and easy to use.

Maptek GeologyCore streamlines geology workflows from importing and validating data to defining geological areas, and generating accurate, reliable geological models. The smart workflow automates daily tasks from data preparation to the published model, giving geologists more time to concentrate on higher-value work. The processes are intuitively grouped to import and validate drillhole data. Domains are defined before generating geological models and publishing them. Repeatable steps make it easy to experiment, and changes made to domains are immediately reflected on the model. GeologyCore can be used for a variety of projects. It offers a machine-learning option that is cloud-based, alongside traditional modeling methods like vein and implicit modeling.

A scalable, innovative data management infrastructure that improves collaboration, security and efficiency. The advanced, architecturally lightweight data management infrastructure can be scaled to multiple users and project. A centralized repository can be customized to meet the highest security standards, and it can be customized according to role-defined permissions. Teams from the seismic, petrophysics and geologic modeling fields can collaborate and interact within a common visualization environment with real-time data workflows. Import/export software with a variety of data formats allows exchange with the OSDU Data Platform as well as with third-party repositories. Teams of seismic, petrophysics and geologic modelers can share data and work in real-time. Common data models, services, interfaces and visualization platforms. Scalability is easy to adjust for changing performance needs and storage requirements as datasets grow.

Teams can work together using intuitive workflows, rapid data processing and visualization tools. This allows them to have the discussions that lead to decisions. Use user-friendly tools to build and refine geological models. You can quickly generate models from large data sets without the need for wireframing. Visualize your geological data in 3D. Gain visual insight to help you interpret it. When you add new data to a modeling, the rules and parameters that you have already established are automatically applied. You can make a change to one model, and all dependent models will be updated immediately. This ensures that models are always up-to-date. Leapfrog Geo's features make it easy to analyze data. These include exploratory data analysis and distance function. Rapidly test new ideas and refine your model. Duplicate models, and use streamlined workflows to iterate interpretations as soon as new insights become available.

Most likely, we don't know the thickness of the source rock in our kitchen area. We also don't know the heat flow or secondary migration losses. You can only rank prospects by running different scenarios with these parameters. Prospects that are charged in the most scenarios will have the lowest risk. Top seal capacity, unconformity and source rock facies are all possible risks. There is also the possibility of different interpretations of seismic. It is absurd to invoke multi-component Kinetics when we don't know the thickness, TOC or HI of the source rocks. Drag and drop your interpreted surfaces to Trinity and draw cross sections interactively through them. You can move the cross section with the mouse to move through the data. In 3D, the cross sections look similar to fence diagrams except that fences can be moved. This will reveal a lot more geology than static maps.

MiVu™, a software package, is designed to perform microseismic analysis during hydraulic fracturing. It can be used for both surface and downhole geophone arrays. MiVu™, which can be used to build simple and complex geologic models interactively and to design optimal microseismic monitoring geometries, process data with user-defined workflows and image event locations using multiple techniques. It also allows you to visualize and interpret microseismic events 3D. Multiple event location methods are available, including cross double difference, 3D grid search, 3D migrating, and 3D grid search. This allows you to see how different geophysical methods affect the location of the microseismic events. It will help you to understand the strengths and weaknesses of each method.

Geomage gPlatform: Time provides processor with an interactive graphical experience when working with seismic data. The Time Imaging package includes all the processing modules and applications required to handle any 2D/3D/4D seismological data, from field data to anisotropic prestack time migration.

Maptek Vulcan is the world's leading 3D mining software. It allows users to validate technical data and transform it into dynamic 3D mine models, accurate designs and operating plans. When developing long-term or daily mine plans, it is important to know when and where to mine. The Vulcan 3D Visualisation Environment helps better understand mining project, with interpretations of results and decision support for profitable and productive mining operations. Vulcan is able to manage and visualise large and complex datasets. It can also process the data and quickly generate models. The sophisticated algorithms allow for virtually instant validation of the models, allowing users a continuous picture of a deposit.

You can locate critical failure surfaces and calculate the safety factor using a combination global metaheuristic search methods with local surface-altering technologies. Results can now be generated in minutes with parallel processing for both failure searching as well as FS computations. Integrating 3D wireframes (representing geological surfaces, modeled faults and surveyed topography) can streamline your workflow and provide more detail. Directly into your 3D models. It is now easier and more efficient than ever to create slope stability models. Import surfaces from mine planning software or geological modeling. Or use built-in surface construction methods that use coordinates or borehole information. You can either build surfaces using point cloud data, or import block models from programs such as Vulcan, Deswik and Datamine.

To analyze soil settlement, perform immediate settlement analysis. You can easily create soil profiles with RSLog, CPT boreholes and soil classification. Ground improvement methods such as soil replacement, vibrocompaction, and stone columns offer more flexibility. They can be applied to different stages at different depths. Sensitivity analysis can also be used to analyze settlement properties, such as stiffness, top and bottom depths, spacing, etc. You can perform CPT and liquefaction analysis together or separately. CPT analysis results can yield 29 different parameter results. You can calculate liquefaction based on either Cone Penetration Test or Standard Penetration Test data.

Galaxy4D is a 2D/3D modeler and stratigraphic tool that provides reservoir engineers and geologists with a powerful and flexible tool. It greatly reduces the time required to build, update and manage reservoir models. It also increases knowledge and understanding of the reservoir. Field development programs can be developed faster and with fewer risks. Galaxy4D's strengths are in its simple and logical workflow. Its modules and displays are easy to use, interactive, and efficient. Galaxy4D can estimate saturation distribution using logs (RSTs). You can create unified catalogs that include reservoir descriptions, engineering, geophysical, seismic, and other data. Analyze the histograms for reservoir properties for single wells or multiple wells for 2D or 3D data sets on a zone-by-zone or defined area basis.

Geophysics by SeisWare provides all the tools necessary to interpret seismic plays, both conventional and non-conventional, in one comprehensive package. Large projects can be shared among asset team members and are fully scalable. The interface is simple and easy to use, so you can focus on your results and not on fighting your software. Our comprehensive geoscience package now includes Geophysics by SeisWare. Are you looking to get a complete geoscience solution that can do seismic interpretation, synthetic generation, petrophysical calculations, and launch a cross-section in multiple windows at once? SeisWare Geoscience 64-bit, high-performance software allows you to double your data with no additional time. SeisWare Geoscience can be used for both geologic and seismic interpretation.

Multisensor GeoStreamer is the ideal platform to perform broadband imaging. Deep towing reduces weather impacts and improves acquisition efficiency. The recorded signal is not sensitive to changes in towing depth or local sea surface variations. This significantly reduces non-repeatable noise in reservoir monitoring projects. Pre-stack phase and amplitude are consistent in a frequency-dependent and angle-dependent way. Rich low-frequency signals enhance Full Waveform Inversion and improve subsurface property prediction accuracy. Multisensor wavefield separation allows for better shallow illumination. For standalone interpretation, near-surface images can be used that are not affected by acquisition footprint effects. Enhanced broadband resolution stratigraphy allows for the recovery of small time shifts due to changes in reservoir pressure and saturation during reservoir monitoring projects. GeoStreamer employs both velocity sensors and hydrophones to remove any ghost reflections from the surface.

The advent of digital transformation via the cloud has provided an opportunity to create a new generation operations geology software that will improve collaboration and productivity. GravitasEDGE was built using the most recent technology. Users have access to a rich operations geology toolset to manage the geological workflow. It seamlessly integrates with other disciplines like drilling and asset geoscience. Winlog, EZ Correlate, PoreView, and Reporter, all world-class applications, are available for log visualization and analysis, well correlation, pore pressure monitoring, and daily and end-of-well reporting. The GravitasEDGE mobile app has been designed for smartphones and tablets. It allows users to view charts, reports, and other information on any device at any time, from anywhere.

Lynx Exploration Archivist Seismic scanning and Vectorising (LEASSV software) is a comprehensive software solution that allows you to re-vectorize scanned sections of seismic sections and output the results as industry-standard SEGY format trace files. The suite includes utilities that allow output files to be prepared for loading into a seismic interpretation workstation, or for further processing. The Lynx Launcher allows you to access all Lynx programs from your Lynx desktop icon. It also contains utilities and applications. You can install from CD-ROM or downloaded setup files.

g-Platform QC : Acquisition QC includes the applications required for testing the acquired 2D/3D Seismic in the field or aboard the vessel during the acquisition process. - Geometry Assignment QC and Edit - Basic refraction and FB picking - SC residuals and deconvolution Signal processing - Migration of stacks and post-stack Geomage™ g-Platform provides processors with an interactive and graphic experience when working with seismic data. The software is divided into packages for Acquisition QC, Land, Marine, VSP, and Depth Imaging applications. This simplifies licensing according to the domain that you need to work in.

The suite includes utilities that allow output files to be prepared for loading into a seismic interpretation workstation and further processing. LEAMAP can be used either as a standalone program or integrated with LEASSV to provide a complete solution for reconstructing seismic data using images of sections and basemaps. A minimum system requirement is a computer running Microsoft Windows XP or Vista, 7, 8, or 10 (x86, x64). Snowbound Software Inc supports more than 60 raster file formats via its raster library. Standard Windows printer drivers support plotting. Locprep is an interactive editor that can be used to edit Lynx or UKOOA-type location files. These files store information about seismic shotpoint locations and general location information. Locprep can be used to perform many tasks with LOC files.

SPW software is an interactive seismic processor system. SPW can be parallelized to run on multi-core processors that have threads on Windows 7 or Windows 10. SPW can be used on workstations, desktop computers or laptops. It can also be installed as a client/server configuration to meet large processing requirements on high-end server PCs. The SPW 3D package provides a complete processing system to process 3D P-wave seismic reflectance data. The system's strengths include data QC and interactive analysis. These allow for rapid control of data quality, and the checking of processing results.

MESA is a cutting-edge software package that offers a complete set of tools to optimize onshore, offshore and transition zone survey design, planning, and optimization. Data acquisition is the core of the seismic lifecycle. It is crucial that accurate decisions are made right from the beginning of the acquisition design process. To accurately analyze the imaging objectives of seismic projects, you need flexible and robust survey design tools. MESA software meets these needs for both marine and land projects. It streamlines the planning and survey design process. Field-proven on land, with a towed streamer and OBS survey designs; also multi-component or VSP surveys.

Evaluation of a variety of QC attributes in arbitrary Windows, as well their derived combinations. Interactive common source/common receiver/CMP attribut map, CMP fold map and location map for advanced analysis of data quality - all maps are fully synchronized among them and with seismic display, active templates are highlighted along with SP and RP of the current trace. Real-time QC--control data quality immediately after it is acquired. This allows you to make decisions and fix problems instantly. A complete set of industry-standard algorithms are available for data processing, including vibroseis correlation and trace editing, bandpass and FK filtering and Radon, FXY and FXY decons. TFD noise corrections, deconvolutions and amplitude corrections can all be done. Interactive velocity analysis, statics and NMO-correction can also be used. Regularization, stacking, prestack and after-stack time migrations can also be done.

Comprehensive software package for near-surface seismological methods. Easily process reflection data with one application, including multi-step redo and undo. All records from a survey line can be imported at once. Use layout charts to efficiently assign geometry. CMP binning is used to correct crooked lines. AGC, trace balance, time-variant scaling, and AGC. F-K filtering, frequency filtering, Tau-p mapping. Predictive and spiking deconvolution. Random noise attenuation Muting of surgical, top, or bottom trace. Gather sorting (CMP), common shot, common receiver or common offset) Velocity analysis of CMP or common shot gathers. NMO correction and inverted NMO correction. This application is rich in features and can be used to process single-fold seismic reflection data or GPR data. Assign geometry in reverse or forward trace order. Support for SEG-2, SEG-Y, SEG-D, ASCIII, MALA and ImpulseRadar data formats. Static correction for elevation and first-arrival alignment. AGC, trace balance, time-variant scaling.

Combine all data sources to get a complete picture. This eliminates manual processing and allows you to uncover new insights and risks. Combine 1D, 2D and 3D geometries and multiple analyses from different products to increase your problem-solving capabilities. To better understand the complexity of your problem, you can clone that analysis and modify boundary conditions or material properties. You can run multiple analyses simultaneously and monitor the results. You can run multiple processes concurrently to generate construction sequences and establish initial conditions. Perform sensitivity analyses, model complex time sequences or divide a complex problem in smaller packages. You can dive deep into your project and create a single file that defines it. Then, you can continue to review the results and reassess as needed.

SurvOPT allows you to analyze the effects of changes in survey design in real-time. SurvOPT seismic survey software can not only find efficient shooting plans and precise completion estimates but can also compare vessel configurations side-by side, explore different costing models, and analyse the effect of any parameter change. SurvOPT offers vessel-specific acquisition plans that maximize acquisition time and minimize non-productive line change time. The patented optimization engine is able to handle all scenarios, including obstructions, timesharing and tides, priority areas as well as crew changes, circle calls, weather downtime, crew changes, crew changes, crew shifts, crew changes, circles and port calls. SurvOPT allows you to specify feather requirements for individual lines and will optimize line scheduling around them, placing you on the right line at a time that is convenient without any unnecessary delays.

The Petrel E&P platform combines transparent data flows and a simple-to-learn graphical interface--Petrel Reservoir Geomechanics-that supports the VISAGE sim configuration and results visualization. This allows the powerful functionality of VISAGE simulator to be seamlessly combined with other interpretation, modeling and engineering workflows within Petrel. The Petrel platform-enabled workflow allows you to include multiple data types in order to create new 3D stress and geomechanics properties, or to add geomechanics data for existing reservoir subsurface models. This seamless combination within Petrel ensures that the geomechanics model can be integrated with geophysics and geology as well as reservoir data.

Geology by SeisWare allows for efficient geological workflows. It is an intuitive and fast interpretation tool. Our Petrophysical Calculator is a favorite with clients. You can create and customize calculations such as net pay, assign zones attributes, and many more! We are experts and we build our software with your guidance. Our software has been shaped by user feedback and client focus groups. Our software packages are compatible so your team can use them together! Geophysics by SeisWare is fully integrated with Geology for seamless data integration. This allows for fast results and no need to import or export data. Our software must keep up with your plans. Geology by SeisWare works intuitively and is responsive. You will be amazed at how fast you can run! You can run multiple calculations in sequence using a variety inputs such as log curves, log curvases, zone attributes and previous outputs. Perform aggregate functions like summations and averages of data.

A survey-based viewer that is geographically accurate allows you to view seismic shot lines. Layers such as NTS grids and DLS grids, culture and wells can be incorporated. You can add lines, text, areas, and plot directly from your computer. Show 3D data in an outline or all points of source and receiver. Click on a line to open the database record. Third-party software can be used to link scans of documents in electronic image format (e.g. TIF or JPG) to allow viewing and printing. Many packages offer editing, faxing and e-mail capabilities. These features add more versatility to TerraSeisTM. Flexible searching tools that use your SEG-P1 or seismic line meta-data to locate lines consistently and uniformly. Your data can be inter-rerelated in creative ways that maximize the potential of your data. To assist in the selection of data sets for further processing, show key data elements in your locate window.

DecisionSpace®, 365 Essentials is an industry-leading exploration and production (E&P), which provides the best performance at a reasonable price to help you run your business. This software is flexible and you only pay for what you use. Advanced seismic processing technology and QC workflows allow you to gain a detailed and insightful understanding of subsurface. Optimize your well operations to increase productivity Start without any data entry or report configuration. You can jump start your economics evaluations by having instant access whenever and wherever you need it. Self-service well construction software that reduces well preparation time, increases reliability, and maximizes well productivity.

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

Katalyst is a leader in geophysical preservation and seismic segment scanning services for the oil & gas industry. Our proprietary software is based on more than 25 years of experience and allows us to offer clients a valuable and unique way to convert aging hardcopy paper seismic sections into digital format. Once the data has been digitized and stored, it can be used to enhance ongoing and future processing and interpretation activities. In many cases, historical seismic data in the exploration industry is only available in hardcopy format. These seismic sections often cover areas of exploration that do not have modern seismic coverage. Conversion of hardcopy sections to digital SEGEY data is a cost-effective way to obtain greater seismic coverage in areas that may not have any other data.

You can create your own analysis graphs using a drag-and drop format. Choose from a variety of data types, displacements, coordinates and vectors. Additional information like site voltage is also available. You can change the data reference values, date ranges, and filter your data-set with filters like 24h averaging. For simplified reporting, design your analysis graphs. Then add them to your dashboard. Heat Mapping - Choose any data type you wish to display, adjust the time range, and then display the movement as a heat map. You can adjust the scale and weighting of heat mapping colors to meet your reporting needs. For quick site reference, overlay project imagery below your heat maps. To cross-reference data from multiple systems, you can integrate any number of prisms and types of sensors.

OpendTect software is made up of two parts. One is an open-source, free part, and the other is a commercial, closed source part that is protected with FlexNet license management software. OpendTect is the open-source component. It is a seismic interpretation software system that can interpret 2D and 3D seismic data. It also allows for rapid development of innovative interpretation tools. OpendTect can easily be extended by free plugins. OpendTect Pro is the closed-source version. This extended version offers additional functionality for professionals. OpendTect Pro can also be extended with plugins from the commercial sector that allow for unique seismic interpretation workflows.

Use streamlined workflows to change the way you view and work with data. Quickly generate cross sections and use tools to integrate your models with engineering plans. Rapid creation and updating geological models will increase the productivity of your subsurface 3D modelling. Your models and outputs, such as cross sections, are automatically updated when new data is added. This saves both time and money. 3D subsurface modeling offers unparalleled accuracy and efficiency when it comes to understanding ground conditions. You can identify and assess risks earlier in the project's lifecycle. Subsurface insights in 3D bring clarity to complex data and give you a better understanding. Visual 3D subsurface models are more effective in helping you understand ground conditions.

OCPS is completely script-free and was specifically designed to address the challenges of open-cut phosphate mining. It is composed of predefined logic that, when combined with the expertise of mining engineers, determines what is feasible across multiple mining operations. Engineers are able to react quickly to market changes and maximize output, which in turn creates shareholder value. OCPS is the only Enterprise Planning software that conforms to industry standards and aligns with ISA-95. This allows for true collaboration across the entire mining value chain. You can simultaneously schedule mining and dumping so you know the source/destination of each step.

Maptek BlastLogic, an all-in one solution, adds value to open cut operations by streamlining drill & blast design and tracking. It allows operations to make blasting decisions based on mine plans, geology and geotechnical information with instant data connectivity and visualization in the office or field. Flexible drill and blast systems designed to work in demanding production environments. Users can access data instantly and universally, which simplifies and accelerates routine tasks. Innovation in blast modeling, design, and analysis. All operational blast data centrally recorded. Interfaces with leading drilling navigation systems. Scalable business-wide solution. The best blast performance can be achieved by combining data sets from mine planning, drill guidance and field survey, as well as parameters for load design, post-blast evaluation, to create an intelligent blast design.

Compare the tool responses of different vendors against your reservoir geology to determine the best tool and resistivity curves. To create high-accuracy final Inversions, integrate all memory data. For fast results, deploy the inversion module on High Performance Computing devices (HPC). To prevent the target zone from exiting and to keep the reservoir in place, calculate the distance to the bed boundary in real time. You can create phase shift and attenuation curves using non-azimuthal instruments, interval length, and parameters for 2-layer boundary mapping in real time. To predict a tool’s log response in advance, you can build an earth model of the formations that you are drilling. This will allow you to easily model resistivity effects such as shoulder effects, polarization Horns, and anisotropy.