Best Metrology Software for Windows of 2024

Calibration Control (CC), is used for maintenance, calibration, and general asset management. You can quickly and visually track equipment that needs calibration or maintenance using customizable highlighted grids or auto emails. Audit trails are maintained to track equipment traceability, people and companies, as well as attachments, certificates, and other information. Automate calibration control with custom or default barcode labels scannable by time-saver dialogs to increase speed. You can create custom reports or modify existing ones using the Report Designer. CC is used by ISO, FDA, and ANSI quality systems to maintain compliance and communicate that compliance to auditors or internal customers. Although CC was developed in a manufacturing environment, it can also be used in other industries such as Metrology Services, Health Care, Aviation/Aerospace, Mining, Testing, Maintenance, Designer Engineering, Oil Wells, Distribution, Packaging, among others.

KurtSPC Premium statistical control software allows you collect data from many devices and to provide it at one place optimizing your manufacturing. Statistical process control (SPC), is used to monitor and control a process in order to make sure it runs at its best. A manufacturing process can produce as many conforming products as possible while minimizing waste. This is its full potential. KurtSPC Premium statistical control software is an easy-to use, simple-toconfigure solution for process optimization. KurtSPC Premium software includes user-definable error codes, collection fields, and graphical/text operator instructions. It supports voice and video, custom screens and reports, machine control controls, and automated gaugeging. It supports almost all types and models of gages, metrology tools, networking, as well as Kurt's powerful Event/Actions.

Supporting everything from manual to fully automated calibration all using your lab's 17025 measurement uncertainty calculations. With Metrology.NET's standardized module-based "taxonomy" approach, creating automation has never been faster. New automated calibration procedures are created in three easy steps. First, create the test points with pass-fail limits. Next, add the instrument setting, and finally, create a VISA script using Metrology blocks. Metrology.NET is all about the reuse of software tools across all disciplines, which is an efficient use of resources. Metrology.NET does it all, DC & low frequency, RF and microwave, torque, temperature, flow, force, humidity, mass, pressure, you name it. Plus, everything is designed on a sustainable software framework. As 21st-century engineered software, Metrology.NET incorporates the best of current technologies. Not just buzzwords, Metrology.NET is truly a scalable, low-code, future-proof solution built for metrology.

ThreeD is an easy-to-use, free program for measuring large volumes of dimensional metrology. ThreeD can be used to measure 3D coordinates via multiple stations. ThreeD provides a variety of tools, including Coordinate Transformations, 3D Data Viewer Geometric Fitting Error Analysis and Help Examples. The full manual operation is free (no instrument drivers required); If you need Driver for your instrument, contact your application supplier. The 'Total Station class' is the most common type of instrument. ThreeD is a basic Dimensional Metrology measurement tool. ThreeD makes no express or implied warranties. The user is responsible for determining the appropriate use.

Prime Technologies has been a leader in calibration and maintenance management software for almost three decades. Our programs are used by thousands of companies all over the world to eliminate paper. The program has powerful math and data verification capabilities to meet FDA, ISO, and other regulatory requirements. The program supports both off-line and automatic calibrations using tablets/laptops, and documenting process calibrators. Each version is pre-validated and 21 CFR Part 11 compatible for life sciences facilities. Accounts can be divided and configured to suit the preferences of a single site or harmonised for enterprise-level deployment. Integration to ERP, CMMS and LIMS can be achieved using APIs and technical support.

QMSys Threads, Tools, Gauges & Calibration Management, a powerful and simple-to-use software program for calculating screw threads, cutting, forming taps, thread gages, tolerances for linear sizes, plain gauges, fits for linear sizes, and calibration management for all types of plain and thread gauges, in accordance to international and national standards. Qualisyst Ltd. is a company with over 20 years of experience in developing metrology, quality assurance and quality management software. Our goal is to improve the efficiency of our customers by using a holistic approach that maximizes productivity and quality while also minimizing costs. Our customers have been a key part of our success, and so has our partnership with them. The software can be used on any computer that has a USB Memory stick connected. The software will not be installed on the computer. Therefore, there is no need to worry about possible computer damage.

Track and schedule vehicle maintenance, inspections, and metrological controls. Keep track of all repairs you make to your vehicles. Export data to XML Spreadsheet (Office/Excel compatible), HTML, and text format files. Reminders that are custom date-based or odometer based. Vehicle insurance, traffic fines, and management of accidents. Keep track of all vehicle-related expenditures. Support for imperial (miles, gallons) and metric (kms and litres).

METROLOGX4: Universal 3D Measurement Software Metrolog allows you to upscale your quality inspection. Get a real performance accelerator to power your 3D measuring devices, and more. Metrolog X4 architecture not only benefits from current computer and OS technology significantly increasing performance and metrology software throughput but also simplifies your day to day measurement workflow.

There are many analysis packages that can measure everything, from machined parts to blades, screws compressors, gears, and camshafts on a wide variety of CMMs. QUINDOS is the most popular modular metrology software for complex geometries in engineering, energy, automotive and aerospace. You can choose from a variety of modules to create precise measurement applications. You can design your application and customize the UI for your machine operator. QUINDOS is highly programmable, even for complex geometries. It also offers structured programming and the ability to create a custom command library with UI support. Siemens AG Turbines uses QUINDOS and I++ Simulation high-pressure blades to visualize production and measurement in one step. BMT Aerospace uses QUINDOS & I++ Simulator to simplify production and provide offline testing with a virtual measuring area.

MicMac is a free, open-source photogrammetric suite (Cecill B license) that can be used for a variety 3D reconstruction scenarios. Although it is primarily intended for academic or professional users, constant efforts are made in order to make it more accessible to all. MicMac's versatility is one of its strengths. It can be used in many fields, including cartography, environment and forestry, archaeology, heritage, archaeology, and other industries. MicMac allows the creation of 3D models as well as ortho-imagery, when necessary. MicMac can be used to create any type of object, including small objects or statues that are acquired from the ground. It can also be used to acquire buildings, cities, or natural areas via satellite or aerial acquisitions. The tools also allow for the georeferencing of the end products in local/global/absolute coordinates system. Other complementary tools allow for the exploration of metrology, site surveying, and other related fields.

SpatialAnalyzer, the best portable metrology software for large-scale applications, is the most popular. SA is an instrument-independent, traceable 3D graphical software platform that makes it easy for users to integrate data from multiple instruments and perform complex tasks simply, ultimately improving productivity. SA is a highly flexible, instrument-independent, traceable 3D graphical software platform that makes it easy for users to inspect parts. Analyze data, report and reverse engineer. You can interface with almost any portable metrology instrument and automate complex operations to increase measurement and inspection efficiency. A wide range of problems can be addressed, from simple to complex. You will save time, money, effort, and ultimately, productivity. You can achieve goals you never thought possible by establishing a return on investment. Instrument-independent, SA can simultaneously communicate with virtually any number and type of portable metrology instruments.

TANGRAM is a flexible, intuitive, and very capable metrology software. It does not require any programming knowledge and can be tailored to the needs of each customer. TANGRAM was developed for users that need simple, easy-to use metrology software. TANGRAM is the final component of the flexible gauging system and CMM functionality. It offers the right balance of functionality, performance, and usability. In-line, graphic element reporting simplifies the evaluation of element form and position deviation. Simplified and advanced creation of reference systems. Measurements can be stored in Access databases and accessed by other applications for special calculations, statistics and integration with other applications. Advanced users can add special calculations using a Pascal-like internal language. Geometric tolerance and relationships between elements, and a dry-run mode to check program flow.

Elements®, a 2D CAD-based software for metrology, is ideal for measuring parts that have a high feature density. It can create measurement routines from 2D CAD data with ease. It then optimizes measurement paths automatically to ensure that data is collected as quickly as possible. Elements' advantage is its ability to handle large numbers of discrete features efficiently and quickly. CAD formats that can be imported include DXF and Gerber as well as CSV locations lists. The advanced review mode allows users to inspect specific features in real-time after a run is completed. The coarse alignment feature allows for the positioning of finders in real-time to be updated for more accurate measurements. The built-in analysis tools make it easy to analyze large data trends. These tools include scatter plots and histograms for dimensional values as well as whisker plots that show deviations from nominal. Evaluate your measurements and recommend the best solution for your needs.

TurnCheck is a fast and easy-to-use software that focuses on what you are trying to measure, rather than how it should be measured. Automatic feature extraction instantly finds and measures all parts features in a single scanning. You can easily view all basic shaft dimensions in one image. Rotational scans are available for runout and form measurements, providing plots that allow you to visualize the results. Pre-programmed components are automatically rotated to allow for intelligent and fast one-touch measurements. A large number of common thread types are included in an integrated thread library for easy thread analysis. Results such as pitch, major/minor size and more can be obtained quickly. Data points can be compared to a DXF including 2D GD&T. Additional data points can also be output into optional SmartProfile®, software for advanced GD&T and 3D analysis.

Scan-X®, a powerful yet easy-to use surface profiling software, allows users to visualize surfaces and take measurements. Scan-X analyzes the laser scan data and produces a high resolution, two-dimensional or three-dimensional raster. Scan-X can be used offline to evaluate laser scan data imported from external sources such as a video measurement system. Scan-X comes with adjustable cursors to make quick and easy measurements. Users can archive measurements and use playback mode to perform automatic inspections. OGP authorized representatives have a strong metrology background and are qualified to evaluate your measurements requirements and recommend a solution that meets your needs. Your local representative can assist you with product information, demonstrations, and training.

Renishaw's MODUS provides a powerful platform to measure 5-axis. A configurable interface allows native DMIS to be developed off-line, drawing geometry, embedded measurements, and tolerance data directly from CAD. Full simulation is also possible. The software contains algorithms that are certified for feature measurement, feature creation, and part alignment. The software allows offline creation of programs directly from CAD, with on-screen probe paths verification. The CMM environment, fixture, and location of the part can be defined to enable full simulation of 5-axis measurements programs. This reduces CMM downtime, as the programs are ready to run when they arrive at the machine. MODUS has a wide range of reporting capabilities, including CMM text reports that can be formatted in any way you like. Graphical reporting allows results to be displayed on the CAD model. This includes whisker charts or 3-D form plotting.

ZEISS CALYPSO measures geometry elements quickly, easily and accurately. Click on the desired features to create inspection plans. ZEISS sensors and measuring systems are the perfect combination for a powerful, all-in-one system. The software will adapt to your needs. ZEISS CALYPSO offers the right tools to meet special requirements thanks to its numerous optional add-ons. Create inspection plans in just a few clicks, and without programming skills. ZEISS Calypso can be programmed graphically or directly on the workpiece. Add-ons enable you to create and save entire CNC inspection plans at a remote workstation. ZEISS CALYPSO creates inspection plans based upon PMI data, including all relevant features. Using the integrated tool for developing measurement strategies, you can either implement company-specific strategies or optimize your inspection plans based upon recommendations from ZEISS.

Manufacturers are now more demanding than ever about reporting, traceability and continuity of data. Intelligent 3D CAD is now the standard in manufacturing. They continue the digital thread through the entire manufacturing process. Verisurf software allows you to see the difference in real-time between the nominal CAD and the finished machine parts. Ideal for a quick, in-process inspection of a first article or an automated production inspection to improve your manufacturing enterprise. Setup of inspection plans can be reduced from hours to minutes, with little or no learning curve. Click-and-build visual interface allows you to use any CMM. Automate quality processes by creating repeatable measurement plans that can be used with any CMM, whether it is portable, manual or programable. Identify deviations and tolerance conditions in measured parts compared to nominal CAD with a premium user interface. With intelligent MBD, you can inspect drawings or CAD models and directly measure primitive features or complex profile.

VMS™, a 2 1/2D metrology software with powerful parametric programming, and built-in scripting to create custom routines and interfaces. VMS has extensive capabilities, allowing it to handle difficult lighting conditions, edges with weak points, and part-topart variability. Area Multi-Focus creates high-resolution data sets from a normal autofocus, providing a high-throughput alternative to laser scanning. Continuous Image Capture (CIC), which synchronizes illumination, camera frame acquisition, and stage movement in order to capture video images even when XY stages move. Native video®, processing capability, allows for saved images to be analyzed using the same tools as live images.

Measure-X®, metrology software, offers power without intimidation. It can be used to create part measurement routines or to operate an OGP system within a production environment. Measure-X®, a metrology software, offers a complete set of image processing tools and autofocus, as well as geometric functions, ANSI/ISO tolerences, easy editing and contour analysis. Compatible with touch probes and lasers. When datum features are large enough to allow for mobility, users can address more complex GD&T needs such as true position and profile of features. Display and reporting capabilities provide both graphical, colored whiskers of deviation and GD&T callsouts on the part CAD.

MiCATPlanner allows for more flexible measurements by adhering to customizable measuring rules. These can be set up as needed. Operators can set the number of measurement points, their distribution and speed for touch trigger or scanning probes based on feature type, size and other criteria. Several rules can be applied simultaneously, depending on the manufacturing or customer needs. CMM part programs can be created in a fraction of the time. Reduce labor costs for parts programming. Reduce the risk of costly and damaging probe collisions. A virtual pre-run program will ensure maximum efficiency. Select which characteristics, features and measurement point sets you want to include or exclude in the measurement plan. Apply individual or global measurement strategies automatically for all part programs, or specific programs. Explain features that cannot be measured, such as missing GD&T or probe angle not defined.

ZONE3®, Metrology Software, is a completely new way to work with multisensor measurement systems. It provides faster, easier and more productive measurements. Its interface displays relationships between parts and sensors, datum alignments and machine accessories. True sensor independence with multisensor capabilities, including OGP’s most advanced sensor options. No need to specify the primary sensor. Intelligent routine optimization ensures that steps are run as efficiently and effectively as possible by reducing the number of machine movements while simultaneously measuring features. Auto path generation can be generated using CAD or user-entered nouns.

Mitutoyo MCOSMOS is a proprietary metrology suite consisting of interrelated modules, as well as dedicated expansion modules (32- or64-bit) for Microsoft Windows 7,8,8.1 and 10 operating system. MCOSMOS is available in 37 countries, and in 12 different languages. It sets the standard for metrology software. MCOSMOS allows integration between a wide range of applications. This improves the efficiency of your CMM, and increases productivity in your quality control functions. Expansion modules, such as GEOPAK, are available for specific applications, including gear measurement, reverse engineering, airfoil analyses, and integrating metrology with CAD. Modular MCOSMOS allows you to customize your measuring software to include only the modules required to meet requirements. The measurement results can be displayed, printed and archived in a variety of built-in formats and user-defined formats.

Mitutoyo's MeasurLink software provides complete support for your manufacturing control system. MeasurLink 9 provides online data collection, SPC charts, analysis, quality control/supervisor alerts and reports, and all of this in real-time for your entire manufacturing system. MeasurLink is designed to create a quality-sharing system for integrated network, and includes a comprehensive data collection solution for your business. MeasurLink standard real-time functions as a clearinghouse for data acquisition by allowing you to connect virtually any measuring device and acquire data. It supports a wide range of metrology technologies including calipers and micrometers as well as indicators, CMMs, Vision Systems, and more.

KITRY EHS data entry or retrieval from third-party software. Qualifying events, monitoring remote file and reporting. Near-misses. Analytical management of files related workstations. Setting up workflows, producing statistical report, optional SCANOCR of paper documents. Management of workstations, homogeneous exposed groups, warnings and their actions plans, workflows and the "3 green light" process, occupational risks assessment with the possibility to configure several methods for calculating criticality indicator for hazardous situations, chemical products management and risk assessment. Ambient metrology, building management, fire plans, historizing organizational structure, web reporting on dangerous situations, configurable legal documentation.