Journal Alioth's Journal: Helicopting 2
So, my friend Mike in Houston did something really awful to me. He let me fly his little Blade CX2 radio controlled helicopter. It was a huge amount of fun. The Blade CX2 is a co-axial fixed pitch heli (with cyclic controls, but rotor speed instead of collective pitch) and quite easy to fly.
So I couldn't resist getting a heli of my own, except I decided I wanted something more challenging, a collective pitch heli (with a Hiller-Bell rotor system). So I got a Honey Bee CP2, an electric heli with a 560mm rotor diameter (so it's big enough to fly outside on a not too gusty day, but small enough I can fly it in the lounge, too).
What did I let myself in for...
Two weeks after getting it, I can finally hover (tail in), and do a reasonable landing and takeoff. If it were a full-scale machine, I'd say I'd be 3/4 the way to solo at this stage. I'm now having only 3 crashes per battery instead of 30 (so the rotor blades are lasting a lot longer). I've flown two or three fully charged batteries per day. So far, I've gone through the following:
* 2 sets of wooden rotor blades.
* 2 sets of wooden rotor blades that are repairable
* 1 tail rotor motor (they just wear out, so I upgraded to a dual tail rotor motor setup).
* 1 main rotor motor (also just wore out)
* 1 4-in-1 (motor control and reciever) - power transistors blew - now repaired. (Good job I can solder SMD parts)
* Main driveshaft - rotor mast pin
I've got off lightly it seems, though: reading the heliguy forums, most people also bend the feathering shaft, break the ball joints of the swash plate linkages, and bend the main driveshaft. Some people have even managed to chop off the tail boom with their own rotor blades! (This is why I've not got the carbon fibre blades yet!)
I console myself with the thought that the entire helicopter and all the spares I've had to buy has only cost about half an hour's flight time in a full-scale helicopter (and that's a flight where you DON'T crash it!)
And it's bean LOADS of fun. Everything about it has been fun, tinkering with it to get it properly set up, fixing the electronics, and mastering the hover. My last flight felt like magic - there it was, hovering two feet in front of me just below eye level, and I wasn't even thinking about the small, frequent tiny corrections my fingers were constantly making.
Unfortunately, then I got too confident and tried to land on the piano and missed. Another set of wooden blades...
Photos (the in flight ones are rather crap, I had to do them on the self timer, I don't trust myself enough to fly it in the same room as another person yet - and so they are badly framed or out of focus):
http://www.alioth.net/pics/ModelHeli/ModelHeli.html
Funny thing is I called my friend Paul in Salt Lake City, told him I'd bought an RC heli, and he told me he'd done exactly the same (except he got a Belt CP, which is a bit bigger).
Fun (Score:2)
Nice pics (Score:1)
Were it me, I'd probably set up a digital video camera, transcode the video into individual frame pics, then take the ones I liked. Lower resolution, but a better chance of getting a good shot. (That's also how I pulled a great shot of a lightning strike out of a video my brother shot a few years ago.)