Forgot your password?
typodupeerror
User Journal

tqft's Journal: Welcome back me & watch out for debian upgrade

Journal by tqft

Was here looking for last years posts on getting a tv card working so thought I would say Hi.
Hi.
So running debian sid I just did an update/upgrade to the 3.8 kernel and a bunch of other stuff.
xfce a bit busted.
grub changed some stuff around which was not expected but fixable.
And as alluded to above tv card not working. Not sure why. Boot into 3.2 kernel - working. Boot stock or custom 3.8 no.

Also with the install of the 3.8 kernel, the 3.8 source code doesn't come with the header files even if you have the 3.2 headers installed. Maybe that is why I have no dvb modules. About to reboot and see if the latest kernel compile with headers works.

Update: rebooted and almost
Jun 2 15:58:50 tqft kernel: [ 5.905783] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
Jun 2 15:58:50 tqft kernel: [ 5.906683] cx88[0]: subsystem: 00ac:0400, board: DViCO FusionHDTV DVB-T PRO [card=64,insmod option], frontend(s): 1
Jun 2 15:58:50 tqft kernel: [ 5.906684] cx88[0]: TV tuner type 71, Radio tuner type -1
Jun 2 15:58:50 tqft kernel: [ 6.086895] cx2388x alsa driver version 0.0.9 loaded
Jun 2 15:58:50 tqft kernel: [ 6.087136] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
Jun 2 15:58:50 tqft kernel: [ 6.556278] tuner 9-0061: Tuner -1 found with type(s) Radio TV.
Jun 2 15:58:50 tqft kernel: [ 6.769787] xc2028 9-0061: creating new instance
Jun 2 15:58:50 tqft kernel: [ 6.769789] xc2028 9-0061: type set to XCeive xc2028/xc3028 tuner
Jun 2 15:58:50 tqft kernel: [ 6.769791] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
Jun 2 15:58:50 tqft kernel: [ 6.771530] cx88[0]/2: cx2388x 8802 Driver Manager
Jun 2 15:58:50 tqft kernel: [ 6.771560] cx88[0]/2: found at 0000:03:00.2, rev: 5, irq: 16, latency: 248, mmio: 0xf4000000
Jun 2 15:58:50 tqft kernel: [ 6.771652] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
Jun 2 15:58:50 tqft kernel: [ 6.772044] cx88[0]/0: found at 0000:03:00.0, rev: 5, irq: 16, latency: 248, mmio: 0xf6000000
Jun 2 15:58:50 tqft kernel: [ 6.772258] cx88[0]/0: registered device video1 [v4l2]
Jun 2 15:58:50 tqft kernel: [ 6.772324] cx88[0]/0: registered device vbi0
Jun 2 15:58:50 tqft kernel: [ 6.811124] cx88/2: cx2388x dvb driver version 0.0.9 loaded
Jun 2 15:58:50 tqft kernel: [ 6.811128] cx88/2: registering cx8802 driver, type: dvb access: shared
Jun 2 15:58:50 tqft kernel: [ 6.811131] cx88[0]/2: subsystem: 00ac:0400, board: DViCO FusionHDTV DVB-T PRO [card=64]
Jun 2 15:58:50 tqft kernel: [ 6.811132] cx88[0]/2: cx2388x based DVB/ATSC card
Jun 2 15:58:50 tqft kernel: [ 6.811133] cx8802_alloc_frontends() allocating 1 frontend(s)
Jun 2 15:58:50 tqft kernel: [ 6.826605] i2c i2c-9: sendbytes: NAK bailout.
Jun 2 15:58:50 tqft kernel: [ 6.826665] zl10353_read_register: readreg error (reg=127, ret==-5)
Jun 2 15:58:50 tqft kernel: [ 6.835128] xc2028 9-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Jun 2 15:58:50 tqft kernel: [ 7.172301] cx88[0]/2: dvb frontend not attached. Can't attach xc3028
Jun 2 15:58:50 tqft kernel: [ 7.172359] cx88[0]/2: dvb_register failed (err = -22)
Jun 2 15:58:50 tqft kernel: [ 7.172400] cx88[0]/2: cx8802 probe failed, err = -22

And an update to the update
  sudo modprobe cx88-dvb
gets tv card working. Why it isn't automatically I don't know. Maybe I should remove the modprobe.conf entry and let the big L handle it.

This discussion has been archived. No new comments can be posted.

Welcome back me & watch out for debian upgrade

Comments Filter:

The person who makes no mistakes does not usually make anything.

Working...