Alternatives to e21 EnergyPlus

A key aspect of enhancing the efficiency of an industrial organization lies in the management of energy consumption. Utilizing smart energy metering presents an effective solution for achieving this goal. Real-time power measurement provides a continuous overview of electricity usage across residences, businesses, or specific electrical devices. Traditional electricity meters are usually calibrated based on billing standards, and periodic readings are taken to gauge energy consumption, which is then used by utility companies for billing purposes. For any organization aiming to optimize its operations, having precise data regarding energy usage is essential. Real-time monitoring of energy consumption empowers companies with immediate insights into their usage patterns. Employing smart energy metering is vital in managing the three primary factors influencing energy costs: the source of energy, the volume of energy consumed, and the efficiency of energy usage. By integrating a power meter that allows for real-time tracking, organizations can effectively monitor any energy product equipped with a measurement interface, thereby enhancing overall energy management strategies. Ultimately, this proactive approach not only reduces costs but also promotes sustainability within the industrial sector.

Tailored specifically for extensive facilities, particularly those within the manufacturing or industrial realms, the AtlasEVO Energy Monitoring System is ideal for any location featuring multiple metering points. This innovative system provides essential data to help decrease energy consumption, carbon emissions, and operational costs, all conveniently accessible. It enables the tracking of electricity, gas, water, or any other metered resource, facilitating enhanced energy efficiency and a diminished environmental footprint across the entire site. Users can access both real-time and historical energy consumption data, allowing for a thorough analysis of energy use trends across various production lines, machinery, departments, and entire facilities. This system also sheds light on wasteful practices, outdated equipment, and areas with unexpected or excessive consumption. By identifying potential opportunities to reduce energy usage, cut down on carbon emissions, and lower expenses, organizations can take proactive measures to conserve energy and witness tangible results immediately. Moreover, it helps to ensure ongoing savings through the adoption of improved energy management practices, reinforcing the commitment to sustainability and cost-effectiveness.

Maximize your efficiency, conserve resources, and reduce costs with the cutting-edge energy analytics platform available today. In mere moments, gain insight into the energy performance of any location. Access your energy data seamlessly on any device, no matter when or where you are. Have full control over the specific information you wish to analyze and explore. With Stark as your energy data partner, you can alleviate concerns about time, finances, and energy management. We offer reliable and high-quality energy data for various utilities, including electricity, gas, water, and compressed air, among others. Our commitment to data security is exemplified by our ISO27001 certification. Being supplier-independent means that regardless of your energy provider or any changes you make, you will continue to receive consistent data without unexpected fees. We manage 18% of the UK's daily electricity consumption and account for 25% of the half-hourly market. Frequently recognized as a top performer in supplier surveys, we ensure comprehensive consumption data for over 529 million data points every month, paving the way for smarter energy decisions. Our platform not only simplifies energy management but also empowers users to make informed choices that lead to sustainable practices.

Compta’s BEE2ENERGY Energy Efficiency Management provides a thorough software solution designed for companies and institutions aiming to enhance their energy efficiency significantly, all while reducing their environmental footprint, consumption levels, and operational expenses. This cloud-based IoT platform is accessible at any time and from any location via the internet. It features real-time functionalities with a versatile SaaS business model and supports multiple channels. Compta’s BEE2ENERGY software is equipped for telemetering, analysis, and management of essential energy sources tailored for both industrial and urban applications. The software encompasses all critical operational components and KPIs necessary for effectively managing resources such as electricity, gas, water, and oxygen, ensuring optimal performance and sustainability. Additionally, it empowers users to make informed decisions that contribute to long-term energy savings and improved environmental stewardship.

Take control of energy efficiency and waste minimization from any location with ease. The application streamlines routine energy management tasks remarkably well. With Enectiva, you'll have all your information neatly organized in one centralized platform. This setup enables you to track the consumption of various energy types alongside data gathered from sensors. Energy usage can be analyzed further based on specific applications, such as the electricity consumption of air conditioning, lighting, refrigeration, and manufacturing processes. All the energy metrics are presented in both technical and financial formats. You can observe how energy consumption evolves throughout the year, daily, hourly, or even in minute increments, ensuring you are consistently aware of your current usage levels. Additionally, financial insights can be derived from any chart, allowing you to quickly assess the costs associated with issues like water leaks or excessively heated spaces. This comprehensive monitoring empowers you to make informed decisions that can lead to significant cost savings.

360 Energy leverages over three decades of experience alongside a cutting-edge AI platform to revolutionize the management of energy use and carbon output for organizations. By offering a thorough methodology that yields transaction-based, audit-ready data, it simplifies intricate information into practical insights. This empowerment enables businesses to confidently steer through the energy transition, resulting in tangible benefits such as energy cost reductions ranging from 5% to 25% and an impressive 300% return on investment. Additionally, through a blend of strategic procurement, sophisticated analytics, and professional guidance, 360 Energy supports its clients in achieving both environmental sustainability and enhanced profitability, all while ensuring they maintain a competitive edge. The commitment to innovation and results positions 360 Energy as a leader in the energy management sector.

METRON functions as a sophisticated digital platform for energy management and optimization, aimed at assisting organizations in lowering both energy usage and carbon footprints. The Energy Management and Optimization System (EMOS) featured by METRON enables businesses to effectively track and enhance energy consumption throughout various sectors, including manufacturing, services, and public entities. By delivering real-time data on energy performance, financial management, and carbon emissions, METRON equips companies with the necessary information to make strategic decisions that align with their decarbonization objectives. Furthermore, enhanced by AI-driven analytics and seamless integration options, METRON not only helps organizations cut costs and boost operational efficiency but also facilitates the ongoing monitoring of their sustainability achievements, fostering a more environmentally responsible approach to business. Ultimately, METRON stands as a crucial ally in the journey toward a greener future.

Dattica specializes in offering cloud-based solutions for carbon and energy management tailored for commercial entities and energy service providers, enabling choices that are driven by data-informed insights. By utilizing Dattica’s intuitive platform, organizations can efficiently manage, structure, and enhance their energy usage, costs, and overall operations through easily comprehensible information. Users can leverage significant insights, metrics, key performance indicators, and alerts provided by Dattica to make well-informed decisions. Dattica’s comprehensive energy management system integrates energy usage data from various sources, such as physical data points and digital sensors, into a unified platform, thereby allowing energy managers to normalize and optimize real-time information effectively. This holistic approach ensures that organizations can respond swiftly to changes in their energy consumption patterns, ultimately leading to more sustainable practices.

Gather energy and energy-related metrics from diverse sources and systems into eSight. This platform enables users to interpret energy data effectively, enhance efficiency, and uncover potential savings of up to 30%. With a variety of customizable dashboards, eSight presents essential energy information for quick insights and promotes user engagement. The eSight Project Tracking feature helps users reach their energy objectives by facilitating target setting, evaluating energy opportunities, tracking progress, and confirming savings. All data is presented clearly through an easy-to-navigate dashboard. Additionally, it assists in managing corporate social responsibilities while adhering to carbon legislation and international standards. By comparing your total energy bill with meter readings, you can avoid being overcharged by your energy provider. Moreover, eSight allows for the creation and distribution of bills to tenants based on their actual usage and applicable rate charges, ensuring transparency in energy consumption. This comprehensive approach not only aids in financial accuracy but also fosters accountability in energy management practices.

Assisting You in Cutting Costs! Numerous case studies illustrate the advantages of charging tenants for their electricity usage and the significant impact this has on reducing overall energy waste within facilities. As the global community adopts a more proactive approach to energy conservation, various strategies have emerged, yet the most effective method has proven to be billing tenants directly for their energy consumption. This approach has consistently demonstrated its ability to minimize electrical waste. The strategy has also been extended to managing energy usage in commercial and industrial settings, focusing on reducing waste and enhancing the environmental footprint while simultaneously boosting a company's profitability. The foundation of this strategy begins with precise benchmarking and management of energy consumption, aiming to proactively address electrical demands rather than simply reacting to them. By closely monitoring usage patterns, companies can identify opportunities for efficiency improvements and foster a culture of sustainability.

Viridis energy and utilities management solutions can reduce your organization's energy expenses by at least 15% or even more. Key benefits include a gradual enhancement of your management framework; upon implementation, the Viridis system aligns with your existing structure and fosters an ongoing transformation of management techniques, enabling the company to reach and sustain elevated efficiency standards. It effectively oversees a variety of energy sources utilized by clients, including electric power, solid, liquid, and gas fuels, as well as water and atmospheric gases. Additionally, Viridis streamlines the client's IT infrastructure by consolidating various standalone applications, which leads to a decrease in the overall total cost of ownership for IT systems. In the face of market demands for greater operational efficiency and the complexities tied to energy supply, improving energy efficiency and utility management is becoming increasingly vital for industrial enterprises at the upper echelons of management. This proactive approach not only enhances competitiveness but also ensures sustainability in energy practices.

The innovative mobile energy management tool, EnergyDoc, streamlines the process of documenting and analyzing energy consumption across various sectors, including businesses and governmental organizations. By facilitating the identification and implementation of potential savings, EnergyDoc effectively aids in minimizing energy usage while showcasing achievable cost reductions. This energy data management system proactively detects significant overconsumption and investigates the underlying causes. In instances of unexpected energy use, SKILL EnergyDoc promptly relays all essential technical information to mobile repair or support teams, enabling swift corrective actions that lead to cost savings. Moreover, it meticulously analyzes and incorporates target consumption levels along with tolerance or escalation metrics into energy consultations, with up to 80% of EnergyDoc expenses potentially eligible for funding. Users have the flexibility to set consumption plan values, with data seamlessly integrated from e-meters or other software systems, empowering them to take control of their energy management. The combination of these features not only enhances operational efficiency but also contributes to sustainable energy practices.

Utilize advanced energy management software to optimize your data effectively. Our robust, cloud-based platform allows you to oversee your energy and utilities seamlessly, potentially cutting costs by 20% or more for your organization. With comprehensive insights into energy consumption, you can evaluate the effectiveness of your energy initiatives through our utility management system. Explore practical strategies for cost reduction, enhanced sustainability, tracking carbon emissions, and benchmarking your energy use against similar facilities. All energy consumption and related activities can be monitored from a single, intuitive dashboard that displays trends, expenses, and usage for all utilities. By visualizing both current performance and future objectives, you gain a complete understanding of your energy landscape. Streamline your operations further with our import tools, automated bill entry, interval data tracking, and EDI services, efficiently integrating billing information into your energy management dashboard for a more organized approach. This way, you can focus on achieving your energy goals without getting bogged down in administrative tasks.

Power-Zero provides an intelligent energy management and solar power solution aimed at assisting businesses with high energy demands in monitoring, managing, and enhancing their energy generation and usage, ultimately leading to cost reductions and the achievement of sustainability objectives. The company offers fully-funded commercial solar Power Purchase Agreements (PPAs), in which Power-Zero takes on the responsibility of designing, constructing, operating, and maintaining customized onsite solar photovoltaic systems without any initial capital or operational expenditure, combined with its Portal, a cloud-based software platform that offers real-time insights into energy generation and consumption through personalized dashboards, analytics, dynamic system visuals, and reporting tools to aid in meeting ESG targets and fostering ongoing improvements. This innovative approach integrates seamlessly with current infrastructure, ensuring minimal disruption, while delivering both historical and real-time data, insightful analytics, and management tools that empower businesses to reduce electricity expenses and lower carbon footprints while ensuring reliable energy supply. Moreover, by utilizing this technology, companies can significantly enhance their operational efficiency and contribute to a more sustainable future.

Our system is capable of interfacing with the standard outputs of various types of meters, including those for electricity, gas, water, and heating. If needed, we can also set up additional electricity meters at any location, specifically for billing purposes. The Rubin ENERGY MONITOR features a centralized software platform that operates in the cloud, allowing for the storage, processing, visualization, and sharing of energy consumption data collected from meters via remote data loggers; it also effectively assists with both administrative and technical functions associated with the comprehensive energy monitoring framework. Furthermore, the reporting service facilitates the creation of documents necessary for invoicing and other operations, while also establishing data connections with additional IT systems, thus enabling the generation of customized reports tailored to meet specific customer requirements. This flexibility ensures that clients receive the precise information and insights they need for optimal energy management.

Take charge of your energy usage and emissions with Enmon. Enmon is a comprehensive platform designed for energy and sustainability management, integrating advanced software, hardware, and expertise in energy. It provides real-time data to help you measure, reduce energy consumption and costs, while also minimizing CO2 emissions. By centralizing all your energy-related documents and invoices, you benefit from secure storage, convenient access, and automated data entry that enhances the efficiency of your energy management practices. With real-time monitoring of energy consumption, you can receive immediate notifications for any irregularities, track usage patterns, and implement strategies to cut costs effectively. You can also keep a precise record of your carbon footprint to ensure compliance, generate detailed reports, and improve transparency with your stakeholders. Furthermore, our platform simplifies energy billing for tenants, allowing for accurate cost distribution, fostering a transparent billing process, and boosting tenant satisfaction. With Enmon, you gain full control over your utility bill management, empowering you to make informed decisions that benefit both your organization and the environment.

energyControl is an innovative self-learning system designed to enhance indoor climate comfort while simultaneously minimizing energy usage, functioning continuously throughout the week. Our advanced artificial intelligence technology effectively reduces carbon emissions and energy consumption from HVAC systems by over 20%, all without requiring any manual input from operators. This solution allows for a seamless upgrade of existing buildings, making it an ideal choice for diverse environments such as offices, retail spaces, hotels, universities, and various other commercial establishments. The interactions among technical systems in larger buildings tend to be intricate, influenced by numerous factors that dictate specific energy needs. By connecting these elements, AI improves data streams through predictive analytics and learns the operational patterns of both the building and its HVAC systems. At any moment, energyControl can adjust the energy output according to the building's current occupancy levels and upcoming weather conditions, ensuring optimal efficiency and comfort. This adaptive approach not only supports sustainable practices but also enhances the overall management of energy resources in commercial properties.

DSE Monitoring is a cutting-edge system for energy management and utility oversight that empowers organizations with comprehensive visibility and control over a variety of resources, including electricity, water, gas, heat, air, temperature, and environmental factors, utilizing intelligent sensors and proprietary software designed to consolidate all primary consumption metrics on a single platform. By providing real-time, accurate data, it enables businesses to identify longstanding inefficiencies, reduce waste, optimize resource usage, and realize substantial cost reductions often within just the first month of deployment, all while bolstering sustainability efforts and supporting ESG reporting with thorough documentation of energy performance. The system employs secure, wireless LoRa technology to facilitate rapid installation without dependence on existing networks, and it integrates effortlessly with current meters and systems to ensure streamlined management across various facilities, factories, and buildings. Additionally, this holistic approach not only enhances operational efficiency but also contributes to improved environmental stewardship for organizations committed to sustainable practices.

ePortal is a user-friendly energy monitoring software designed to help you track, analyze, and comprehend your energy usage in a collaborative manner. Understanding your company's energy consumption is crucial for identifying new opportunities for energy savings. By examining your energy data, you can make well-informed decisions regarding future investments. This practical tool not only aids in invoice management but also allows for the redistribution of energy bills to subclients, ensuring that you only pay for the energy actually consumed. Furthermore, ePortal can be seamlessly integrated with Building Management Systems or SCADA systems, ensuring your energy usage is continuously optimized, monitored, and evaluated. With ePortal, you gain comprehensive insights into your energy consumption patterns, facilitating effective budget management and energy oversight through predefined alarms that alert you to deviations. Ultimately, ePortal empowers organizations to take charge of their energy consumption and implement strategies for sustainable energy practices.

eC4 serves as a sophisticated energy conservation and control system that seamlessly integrates with plant machinery to identify and address inefficiencies, promoting optimal energy consumption. It establishes connections to the electrical panels of major energy consumers within the facility, alongside digital meters and sensors for monitoring water, air, gas, electricity, and steam usage. By analyzing energy consumption patterns across similar facilities and operational scenarios, it effectively detects potential energy waste at an early stage. Users can set specific energy savings targets for upcoming periods and monitor their progress in real-time. The platform offers the convenience of mobile and web access, empowering users to take preventive measures against energy waste and reduce costs effectively. Moreover, it is designed for easy maintenance and provides the flexibility to customize reports, views, and calculation parameters to suit user needs. This adaptability enhances the overall efficiency of energy management strategies employed within the organization.

Supported by the Minnesota Departments of Commerce and Administration, B3 Benchmarking empowers public building owners in Minnesota to effectively manage and lower their energy expenses through access to comprehensive energy data. The tool provides benchmarking energy models, peer comparisons, ENERGY STAR® scores, target tracking, and dynamic reporting, all of which enable users to gain insights into their buildings' performance. Known as Buildings, Benchmarks, and Beyond, B3 puts essential building energy data at your fingertips. By employing simple building and meter information, this online platform generates monthly and annual reports that clearly outline energy usage, costs, and carbon emissions for public buildings in Minnesota. As you cut down on energy consumption, you also reduce operational costs, allowing more funds to be allocated to your organization’s primary services. B3 Benchmarking not only helps you verify that your building is functioning optimally but also identifies which structures stand to gain the most from potential upgrades. Ultimately, utilizing this tool could lead to significant improvements in both efficiency and sustainability.

Energy companies face the significant responsibility of delivering efficient, cost-effective, and sustainable energy solutions for the communities they serve. Uplight is enthusiastic about playing a pivotal role in this endeavor. By bridging the gap between energy providers and their decarbonization objectives, Uplight offers a comprehensive platform that facilitates the engagement, activation, and management of customer energy consumption. Collaborating with over 80 leading electric and gas utilities globally, we bring unparalleled expertise, innovation, and scale to the table. Uplight encourages energy providers to craft more innovative solutions to help them meet their sustainability targets. Our collaborative approach is designed to guarantee success, as we share the common goal of promoting more affordable and cleaner energy options. Achieving this ambitious goal is challenging, but united, we can make it happen. Moreover, Uplight takes pride in being a certified B corporation, representing the highest standards for businesses committed to fostering a more inclusive and sustainable economy. In pursuit of these ideals, we have set an ambitious environmental target to cut down CO2 emissions by over 100 million metric tons, showcasing our commitment to a better future for all. Together, we strive to transform the energy landscape for generations to come.

Verdigris is an AI-driven smart building management platform that optimizes energy consumption for organizations. Verdigris has designed a powerful yet simple IoT-enabled energy sensor that installs in minutes and instantly streams real-time energy data from an organization’s building and assets. This allows Verdigris to build powerful forecasts of energy usage for demand management and building optimization. Verdigris’ AI Innovation analyzes electricity consumption from end use categories down to individual devices, helping buildings stay on top of expensive inefficiencies and catch unseen errors before they become problems. Ultimately, Verdigris’ technology enables a set of highly scalable low-cost energy management capabilities not found in other energy meter solutions at scale. Verdigris also detects what most other systems miss by measuring each circuit at nearly 8,000 times per second. Some of the world’s most recognized companies including T-Mobile, Verizon, and Nvidia are using Verdigris to power their most critical facilities, combat wasteful energy usage and improve underlying building reliability.

EPA's ENERGY STAR Portfolio Manager is a free, interactive tool designed for efficient energy management that enables users to securely monitor and evaluate energy and water usage across a range of properties. It serves a variety of stakeholders, including property owners, managers, and investors, by assisting in the establishment of investment priorities, pinpointing buildings that are not performing optimally, confirming enhancements in efficiency, and facilitating applications for ENERGY STAR certification to recognize outstanding energy performance. This resource not only aids in optimizing resource use but also promotes sustainability within the real estate sector.

BrainBox AI employs advanced self-adapting artificial intelligence to enhance the efficiency of some of the largest energy consumers and greenhouse gas emitters: buildings. A significant yet often overlooked source of this energy consumption is the Heating, Ventilation, and Air Conditioning (HVAC) systems in these structures. Remarkably, HVAC systems account for 45% of the energy used in commercial buildings, with approximately 30% of that energy typically wasted. By leveraging deep learning, cloud computing, and our unique methodologies, our AI engine optimizes HVAC systems in real-time, delivering substantial benefits in energy efficiency, carbon emissions reduction, and overall building performance. As commercial buildings contribute significantly to global greenhouse gas emissions, our innovative technology has the potential to cut these emissions in half. Ultimately, BrainBox AI's transformative approach harnesses sophisticated algorithms and cutting-edge technology to make a meaningful impact in the fight against climate change.

eneXplan is a comprehensive software solution designed to assist building owners, managers, engineers, and consultants in discovering, assessing, and executing energy-saving strategies across various building types. It distinguishes itself by providing these services more efficiently and economically than any competing approach. The name eneXplan reflects its focus on energy expert planning, making it a holistic tool for enterprise-level energy conservation efforts. This software empowers users to quickly pinpoint and evaluate numerous potential energy-saving opportunities in any global building context. Additionally, eneXplan is equipped with the necessary tools, features, and reports to effectively oversee energy consumption and enhance the operational efficiency of a diverse portfolio of properties. By utilizing a straightforward methodology, eneXplan allows users to intuitively develop a thorough model of any building type. Once the model is established, users can access an extensive library of energy-saving solutions to conduct simulations and determine the potential energy savings associated with each option, facilitating informed decision-making for energy efficiency improvements. Ultimately, eneXplan serves as an essential resource for anyone looking to optimize energy use and reduce costs in the built environment.

Introducing the most precise and all-encompassing data analytics platform tailored for every electron traversing the grid. We offer an unparalleled electricity analytics solution designed to assist companies in mitigating risks and effectively navigating the unpredictable energy markets. As the energy sector undergoes its transformation, it is crucial to have tools that can adapt to the dynamic and fluctuating grid conditions. Amperon leverages cutting-edge machine learning advancements to provide the highest level of accuracy in insights related to grid operations. Our AI-driven forecasting capabilities empower you to monitor, strategize, and enhance your energy requirements in response to the changing power markets. With the backing of a skilled team comprising energy specialists, data analysts, and meteorologists, we are developing the cognitive framework of the smart grid to facilitate real-time operational analytics wherever electricity is transmitted. By adopting a proactive stance on energy management, you gain immediate visibility into your substantial industrial demand at the meter level. Our hourly forecasts, both short- and long-term, enable you to manage your load efficiently, thereby minimizing your exposure to market fluctuations and enhancing your operational resilience. This comprehensive approach ensures that you are always prepared for the challenges ahead in the energy landscape.

The ENIT Agent provides you with real-time energy data effortlessly. This innovative solution requires minimal installation effort. Blocklinks_enitagent equips you with a comprehensive tool for tracking consumption of electricity, heat, gas, steam, or water. It integrates a data logger, gateway, database, server, and analysis software into one device, offering a revolutionary approach to energy management. Compatible with a wide range of meters and systems, this device eliminates the necessity for costly expansions, replacements, or installations. Data collected by the ENIT Agent software is seamlessly transferred to an integrated energy management portal, which features extensive evaluation capabilities in remarkable detail. Thanks to its contemporary architecture, the software is adaptable to the evolving needs of your business. The hardware and software of the ENIT Agent leverage cutting-edge scientific advancements, helping numerous clients achieve remarkable success in their energy monitoring efforts. With such a versatile solution, users can stay ahead in managing their energy consumption efficiently.

Energy Manager has established itself as a comprehensive and user-friendly solution, catering to a diverse clientele that spans both the public and private sectors, along with top energy consultants. The platform enables the monitoring and analysis of all utility types, including Electricity, Gas, Water, Oil, Solid Fuel, Biomass, LPG, and Waste, thanks to its built-in reporting features. Its Monitoring and Targeting functionality simplifies the process of identifying waste or excessive spending, while also facilitating the tracking of potential savings. Furthermore, the system incorporates robust data validation, tolerance checks, and alert notifications, ensuring that management receives timely and accurate information. As a result, organizations can enjoy increased data precision and immediate access to energy metrics, available through both desktop and online formats, which allows staff to focus their efforts on discovering savings opportunities rather than merely processing data. This overall approach not only enhances operational efficiency but also contributes to a more sustainable energy management strategy.

Stay informed, stay proactive, embrace inavitas! Inavitas energy intelligence solutions empower customers to understand their energy consumption and keep pace with advancements in their businesses and technologies. Inavitas offers a cutting-edge energy monitoring solution tailored for homeowners looking to minimize their electricity expenses and track their solar energy production. Unlike traditional home energy monitoring systems, inavitas is designed for ease of use, allowing you to effectively manage and oversee your energy consumption. Compatible with any energy setup, utilizing inavitas can lead to savings of up to 7% on your electricity bill. Moreover, our sophisticated energy management system accelerates your return on solar investments, providing a smart and eco-friendly solution that enhances your peace of mind. You’ll no longer face unexpected issues; if an appliance is underperforming, you’ll be alerted in advance. We pride ourselves on offering intuitive, user-friendly systems that ensure a seamless experience for all users. With inavitas, you can take control of your energy future confidently.

Intelometry, Inc. was founded in 2003. It is a Technology and Consulting Services Company specializing in retail electricity and natural-gas market operations. Intelometry clients include large energy users, large energy suppliers, and user groups as well as consulting firms located throughout the continental U.S. Intelometry offers three main product lines: * Retail energy transactional software designed and supported by Intelometry to be used by energy brokers and retail energy suppliers. * Consulting services that specialize in retail energy market operations, regulatory issues and new market entry * Market operations and analysis require the production and distribution of energy data for retail. Key Intelometry staff has held senior management positions in prominent energy companies as well as consulting firms. Our team has a lot of real-world experience that gives them credibility and insight when working for our clients.

NR7 Miner is a global leader in cloud mining, offering innovative and sustainable cryptocurrency mining solutions. By harnessing clean energy technologies, NR7 Miner enables users to mine digital assets like BTC and LTC with minimal operational costs and a high return on investment. The platform features various mining contracts with fixed daily incomes, making it easy for anyone to join the crypto economy. NR7 Miner also provides an affiliate program, 24/7 customer support, and robust security measures, ensuring a safe and profitable mining experience for both beginners and experienced miners.

EnergyFlow Monitor provides real-time tracking of your building's energy consumption—including electricity, gas, steam, oil—and water usage at a highly detailed level, allowing for adjustments based on occupancy trends. Furthermore, it sends instant alerts whenever peak demand levels are reached, ensuring you stay informed. Research has repeatedly demonstrated that the most effective method for reducing energy and water usage is to clearly present individuals with their consumption data. With EnergyFlow Monitor, our clients have experienced an average savings of 15% in both energy and water. The platform offers insightful graphics, analysis-driven text and email notifications, comprehensive reporting, and versatile data export options, equipping you with actionable insights rather than just raw data. This empowers you to make informed decisions that enhance sustainability and operational efficiency.

We are a company focused on engineering services that leverages our advanced software platform, Clarity™, to assist manufacturing firms and commercial buildings in achieving net zero carbon emissions. By comparing your actual energy consumption to optimal levels, you can reveal potential for energy savings and explore alternative designs that minimize carbon output. Our platform allows you to gain valuable insights into material losses, detect upcoming maintenance needs, and identify operational bottlenecks along with the conditions that contribute to them. You can analyze daily averages for specific plant economics or delve into minute-by-minute performance of individual machines, and even compare energy usage across similar facilities on a quarterly basis. Clarity™ serves as our unique cloud-based solution for data analytics and resource management, driving all our efforts, from carbon footprint calculations to identifying opportunities and validating project outcomes. With Clarity™, we aim to empower organizations to make informed decisions that lead to sustainable practices.

USE Manager is an innovative energy management solution that tailors its functionality to your specific portfolio, enabling enhanced oversight and control over energy consumption. Recognized as the industry's leading software, USE Manager is powered by a flexible NoSQL database engineered to accommodate intricate building metrics seamlessly. Users enjoy round-the-clock, real-time management capabilities for their entire portfolio via both computers and mobile devices. By leveraging sophisticated analytics, the system identifies concealed inefficiencies, leading to substantial reductions in energy consumption. Additionally, it features an action rules engine that automates portfolio management according to predetermined set-points. With a remarkable ability to cut fuel usage by up to 52%, USE Manager stands out for its compatibility with existing energy management devices. Furthermore, we offer a complimentary energy assessment program, helping you uncover potential rebates and savings opportunities. This system not only enhances energy efficiency but also supports sustainability initiatives across your buildings.

Our cloud-based SaaS platform manages an extensive electric vehicle charging network that can be licensed for global commercial applications. The Fortum Charge & Drive platform currently supports hundreds of thousands of charging sessions each month through a network of thousands of connected chargers. We provide not only our software and customizable consumer applications but also a dedicated partnership aimed at expanding your charging enterprise. Positioned as the most sophisticated solution for EV charging businesses on the market, we are committed to fostering a cleaner environment. By facilitating a swift and dependable transition to a carbon-neutral economy, we deliver clean energy and sustainable options to both consumers and communities. Users can create or modify their profiles, manage payment methods, add prepaid balances to their accounts, review charging histories, and deactivate accounts as needed. Additionally, our platform allows for the adjustment of configuration settings, management of energy consumption per charger, tracking of transactions, and offers a variety of pricing options to suit different needs. Our mission is not just to provide services but to actively participate in the global movement towards sustainability.

Focusing on expanding the reach of facilities and enhancing project conversions through remote consultations, virtual energy assessments, and ongoing monitoring is essential. Utilities or Energy Service Companies (ESCOs) can gain insights into all their clients and facilities, enabling them to engage effectively and pinpoint those with the highest potential for energy savings while delivering tailored communications. A thorough evaluation of energy use not only boosts customer satisfaction but can also lead to reductions in costs and time by up to 80%, effectively doubling the depth of analysis. Implementing Energy Efficiency Measures alongside renewable energy alternatives can enhance customer satisfaction, create additional revenue streams, and lower service costs. Our custom mobile web interfaces facilitate the quick acquisition of information in an easily digestible format. Moreover, we analyze energy demand using streamlined energy models to enhance consumption optimization, ultimately contributing to a more sustainable future. This approach not only drives efficiency but also empowers clients to make informed decisions about their energy use.

Atrius Energy is an advanced energy management solution from Acuity Brands that automates the collection, normalization, and analysis of energy consumption data across diverse facilities. It adjusts energy metrics for external factors such as weather changes and occupancy levels, allowing organizations to benchmark performance in real time and make informed decisions. The platform provides timely alerts and notifications to highlight potential issues before they impact operations or budgets. Atrius Energy uses industry-recognized measurement and verification standards (IPMVP Options B and C) to validate energy savings from projects, ensuring accountability. Its user-friendly dashboards visualize energy trends and support capital project tracking, enabling precise ROI analysis. The solution also facilitates seamless integration with existing building systems and energy data sources. Customers like Weber State University have reported savings exceeding $2 million by leveraging Atrius Energy’s insights. The platform helps facility managers optimize energy use, reduce costs, and improve sustainability efforts efficiently.

Our analytics solutions can help you reduce your company's carbon footprint and save money and energy, while maintaining a comfortable and safe environment. CopperTree offers more than just data. We offer an independent layer of data, automated system optimization and automated commissioning. Our AI building analytics solution includes a Fault Detection and Diagnostics platform (FDD), an Energy Information System, and a Fault Detection and Diagnostics Platform (EIS). It also integrates system performance auditing. We ensure that smart buildings achieve their full potential by converting your building's data to actionable information. CopperTree Analytics can help you collect and store data, achieve maintenance targets, reduce energy consumption and make better operational decision. Our software, Kaizen is inspired by the Japanese philosophy of continuous improvement. It helps you identify the changes that your buildings and portfolio require.

The Energy Management System serves as a comprehensive energy auditing solution aimed at enhancing energy efficiency and optimizing usage to lower expenses. In the manufacturing sector, energy expenditures can account for 30% or more of total costs, and our innovative energy management system offers effective strategies to maximize energy efficiency, ultimately leading to significant savings. Our solutions encourage behavioral shifts among users, fostering awareness and understanding of energy usage, while our advanced analytics provide valuable insights for improved energy management. Additionally, various hidden penalties may be present in energy bills, often going unnoticed, while there are also opportunities to earn incentives for adopting sustainable energy consumption practices. Our tool not only helps users capitalize on these incentives but also aids in avoiding potential penalties in advance. Furthermore, the Real-time Energy dashboard empowers users to modify their consumption habits instantly, acting as an effective real-time auditing mechanism for their energy use. As a result, businesses can make informed decisions that enhance their overall energy efficiency and sustainability efforts.

DYNAMAT is a powerful data analysis tool designed to convert raw energy consumption data gathered from meter reading systems into actionable management insights, enabling effective monitoring of costs and carbon emissions while facilitating potential savings. This software serves as a vital resource for promoting utility cost efficiency and fostering environmental stewardship. By automating routine tasks, DYNAMAT alleviates the burdens associated with meter data analysis. Its advanced analytical capabilities allow for precise targeting and reduction of energy consumption. A distinctive feature, known as the 'tracker,' learns the profile shape of energy usage and alerts users when significant changes occur. Degree days can be inputted through an external temperature sensor, enhancing the accuracy of assessments. Additionally, the software can calculate emissions for CO2, SOx, and NOx, providing a comprehensive environmental report. It includes standard features for regression analysis and targeting, alongside automated reporting that summarizes consumptions exceeding preset alarm thresholds. The tool also accommodates the exclusion of atypical days, such as bank holidays, ensuring accurate data analysis. Overall, DYNAMAT empowers organizations to make informed decisions regarding energy use and environmental impact.

Transitioning from a centralized power generation model to a decentralized sustainable energy system means that the grid must adapt, as it can no longer depend on a few large power plants to ensure a reliable electricity supply. Concurrently, businesses in commercial and industrial sectors face rising electricity expenses and the heightened possibility of power shortages. By embracing Energy Optimization, companies can shift their energy usage from merely a cost to a competitive edge. Innovative digital solutions for energy management, including Demand Side Response, Demand Side Management, and Utility Optimization Platforms, present new avenues for businesses to capitalize on their energy resources. This transformation not only enhances operational efficiency but also contributes significantly to sustainability goals. Ultimately, leveraging these technologies can lead to a more resilient and economically viable energy future.

Energy AnalytiX® represents an advanced system for energy monitoring, analysis, and management, offering comprehensive real-time visualizations and seamless integration with a multitude of BMS, SCADA, ERP, and control systems. This innovative software solution is designed for building and plant managers, featuring a user-friendly interface that simplifies configuration, customization, and operation. With functionalities that include built-in calculations, analytics, a data historian, and reporting tools, Energy AnalytiX empowers users to make informed decisions aimed at reducing utility expenses and consumption. The platform also boasts web-based configuration options, allowing for streamlined asset navigation and setup tailored to various levels of aggregation. Users can easily identify specific areas of energy waste and pinpoint sources of excessive consumption. Additionally, the ability to compare different consumers using the same metrics through roll-up calculations enhances the effectiveness of the analysis, making Energy AnalytiX an essential tool for energy management. Overall, this system not only aids in tracking energy usage but also plays a crucial role in fostering sustainable energy practices.

With better.energy, you can enhance your hotel’s energy management in an environmentally friendly way. Not only do automated processes ease the burden on your staff, but they also benefit the planet while cutting costs. Explore the benefits of this innovative software, specifically designed for the hospitality sector. better.energy provides the ideal software solutions for a multitude of applications. It allows for the automatic regulation of heating, enabling a smart reduction in energy usage. This system independently manages the temperature in your hotel, supporting energy-efficient practices while alleviating the workload for your team. Additionally, smart home technology simplifies your responsibilities as a hotelier, making your establishment smarter, safer, more comfortable, and energy-efficient. Transform your guests' stay into a memorable experience that showcases the unique, eco-friendly, and service-oriented nature of your hotel. Embrace the future of hospitality with better.energy and make sustainability a core part of your brand identity.

Utility InSite serves as a comprehensive platform for monitoring utility usage, managing bills, and providing real-time insights into energy consumption. With this tool, our clients can gain a clearer understanding of their energy usage patterns and find ways to reduce both costs and their environmental impact. By integrating real-time data with expense management capabilities, Utility InSite empowers customers to pinpoint opportunities for savings effectively. This innovative approach not only fosters financial efficiency but also supports sustainability efforts among users.