Alternatives to TomoPlus

Advanced velocity determination and 3D/2D model building allow for accurate, high-quality and interpretable seismic images in depth and time. An integrated suite of interactive and batch velocity analysis tools allows you to easily solve all kinds of seismic imaging problems. The workflow is simplified by integration with interpretation and modeling tools. Data loss is prevented and geologic constraints are respected. No matter how complex the structural geology, it is easy to create 3D and 2-D models. Highly parallelized to run efficiently on large 3D datasets as well as multi-line 2D datasets. Hydrocarbon exploration and production requires accurate seismic images and depth models. Aspen GeoDepth velocity calculation and modeling system provides a solution to improve seismic imaging in depth or time. It integrates interpretation, velocity analysis, model construction, time-to-depth conversion, and more.

GeoThrust was designed with a workflow architecture in mind to produce an accurate earth model and image in time and depth from data that has been collected with irregular geometry in areas of complex topography, complex near surface, and complex subsurface. It is easy to learn and simple to use, with high technical specifications for data analysis. Nonlinear tomography is used to estimate the near-surface model. This accounts for topography and reduces vertical and lateral velocity variations. Wavefield dating is used to correct the near-surface model. This is essential for imaging from irregular topography. GeoThrust does subsurface velocity modeling, imaging, and estimation from topography. It is not based on a flat datum. Instead, it uses rms and interval speeds that are calculated at reflector positions and not at reflection positions.

Multisensor GeoStreamer is the ideal platform to perform broadband imaging. Deep towing reduces weather impacts and improves acquisition efficiency. The recorded signal is not sensitive to changes in towing depth or local sea surface variations. This significantly reduces non-repeatable noise in reservoir monitoring projects. Pre-stack phase and amplitude are consistent in a frequency-dependent and angle-dependent way. Rich low-frequency signals enhance Full Waveform Inversion and improve subsurface property prediction accuracy. Multisensor wavefield separation allows for better shallow illumination. For standalone interpretation, near-surface images can be used that are not affected by acquisition footprint effects. Enhanced broadband resolution stratigraphy allows for the recovery of small time shifts due to changes in reservoir pressure and saturation during reservoir monitoring projects. GeoStreamer employs both velocity sensors and hydrophones to remove any ghost reflections from the surface.

This software package includes crosshole survey design and model building and modeling, data transformation, CDP transformations, tomography, wave equation migration and post-processing. It provides all the capabilities you need to complete a crosshole seismic project. The model includes P- and A-wave velocities and densities as well as anisotropic parameters. Create an arbitrary velocity model with layers, objects, faults, and other elements. Full wavefield simulation using an anisotropic finite difference method.

Comprehensive software package for near-surface seismological methods. Easily process reflection data with one application, including multi-step redo and undo. All records from a survey line can be imported at once. Use layout charts to efficiently assign geometry. CMP binning is used to correct crooked lines. AGC, trace balance, time-variant scaling, and AGC. F-K filtering, frequency filtering, Tau-p mapping. Predictive and spiking deconvolution. Random noise attenuation Muting of surgical, top, or bottom trace. Gather sorting (CMP), common shot, common receiver or common offset) Velocity analysis of CMP or common shot gathers. NMO correction and inverted NMO correction. This application is rich in features and can be used to process single-fold seismic reflection data or GPR data. Assign geometry in reverse or forward trace order. Support for SEG-2, SEG-Y, SEG-D, ASCIII, MALA and ImpulseRadar data formats. Static correction for elevation and first-arrival alignment. AGC, trace balance, time-variant scaling.

The g-Platform: Depth Imaging covers all processing modules, applications and tools needed to build velocity models and create an accurate depth picture from any type of seismic data.

g-Platform QC : Acquisition QC includes the applications required for testing the acquired 2D/3D Seismic in the field or aboard the vessel during the acquisition process. - Geometry Assignment QC and Edit - Basic refraction and FB picking - SC residuals and deconvolution Signal processing - Migration of stacks and post-stack Geomage™ g-Platform provides processors with an interactive and graphic experience when working with seismic data. The software is divided into packages for Acquisition QC, Land, Marine, VSP, and Depth Imaging applications. This simplifies licensing according to the domain that you need to work in.

To analyze soil settlement, perform immediate settlement analysis. You can easily create soil profiles with RSLog, CPT boreholes and soil classification. Ground improvement methods such as soil replacement, vibrocompaction, and stone columns offer more flexibility. They can be applied to different stages at different depths. Sensitivity analysis can also be used to analyze settlement properties, such as stiffness, top and bottom depths, spacing, etc. You can perform CPT and liquefaction analysis together or separately. CPT analysis results can yield 29 different parameter results. You can calculate liquefaction based on either Cone Penetration Test or Standard Penetration Test data.

Evaluation of a variety of QC attributes in arbitrary Windows, as well their derived combinations. Interactive common source/common receiver/CMP attribut map, CMP fold map and location map for advanced analysis of data quality - all maps are fully synchronized among them and with seismic display, active templates are highlighted along with SP and RP of the current trace. Real-time QC--control data quality immediately after it is acquired. This allows you to make decisions and fix problems instantly. A complete set of industry-standard algorithms are available for data processing, including vibroseis correlation and trace editing, bandpass and FK filtering and Radon, FXY and FXY decons. TFD noise corrections, deconvolutions and amplitude corrections can all be done. Interactive velocity analysis, statics and NMO-correction can also be used. Regularization, stacking, prestack and after-stack time migrations can also be done.

Geomage G-Space™, a complete structural interpretation software, allows for a thorough analysis of seismic and well data. Geomage G-Space™, software allows: Horizon and Fault Picking - Geological modeling - Map creation with errors - Well-tie with dynamic update Well, correlation - Mis-tie workflow - Model of velocity based on checkshots, horizons and angular distance - Simultaneous depth/time picking Static modeling Volumetric Calculation - etc, etc, etc and more...

SurvOPT allows you to analyze the effects of changes in survey design in real-time. SurvOPT seismic survey software can not only find efficient shooting plans and precise completion estimates but can also compare vessel configurations side-by side, explore different costing models, and analyse the effect of any parameter change. SurvOPT offers vessel-specific acquisition plans that maximize acquisition time and minimize non-productive line change time. The patented optimization engine is able to handle all scenarios, including obstructions, timesharing and tides, priority areas as well as crew changes, circle calls, weather downtime, crew changes, crew changes, crew shifts, crew changes, circles and port calls. SurvOPT allows you to specify feather requirements for individual lines and will optimize line scheduling around them, placing you on the right line at a time that is convenient without any unnecessary delays.

Geophysics by SeisWare provides all the tools necessary to interpret seismic plays, both conventional and non-conventional, in one comprehensive package. Large projects can be shared among asset team members and are fully scalable. The interface is simple and easy to use, so you can focus on your results and not on fighting your software. Our comprehensive geoscience package now includes Geophysics by SeisWare. Are you looking to get a complete geoscience solution that can do seismic interpretation, synthetic generation, petrophysical calculations, and launch a cross-section in multiple windows at once? SeisWare Geoscience 64-bit, high-performance software allows you to double your data with no additional time. SeisWare Geoscience can be used for both geologic and seismic interpretation.

PaleoScan is a seismic interpretation software based on a semi-automated approach that produces chrono-stratigraphically consistent geological models. This unique technology was patented in 2009. It allows our clients' seismic interpretation cycles to be accelerated, to scan the subsurface real-time to identify high-potential zones, and to identify hydrocarbon storage or accumulation areas. PaleoScan's ability to create a 3D geological cube of the entire seismic data allows for the visualization and interpretation, as well as the subsurface layers, up to the seabed. This is important in establishing a reliable ranking, taking into account the risks associated with gas injection, of storage reservoirs. Our revolutionary technology, which combines powerful algorithms, computing power, and data analyses, takes your seismic interpretation to a new level.

Quick and easy stability analysis of underground crown pillars or surface roofs using three different limit equilibrium analysis methods: elastic plate, rigid plate, and Voussoir plate analysis. Probabilistic analysis is used to determine the likelihood of failure. By assigning statistical distributions of variables, you can model variability in geometry, point force application, joint strength, bedding strength, water pressure, and external loads. To evaluate the impact of changing model parameters on safety factor, perform sensitivity analysis with a range of values. This method was originally designed for steeply dipping ore bodies. By estimating crown geometry, and assessing stope geometry as shallow or steep, you can apply the best empirical relationships to your model.

MiVu™, a software package, is designed to perform microseismic analysis during hydraulic fracturing. It can be used for both surface and downhole geophone arrays. MiVu™, which can be used to build simple and complex geologic models interactively and to design optimal microseismic monitoring geometries, process data with user-defined workflows and image event locations using multiple techniques. It also allows you to visualize and interpret microseismic events 3D. Multiple event location methods are available, including cross double difference, 3D grid search, 3D migrating, and 3D grid search. This allows you to see how different geophysical methods affect the location of the microseismic events. It will help you to understand the strengths and weaknesses of each method.

Maptek GeologyCore streamlines geology workflows from importing and validating data to defining geological areas, and generating accurate, reliable geological models. The smart workflow automates daily tasks from data preparation to the published model, giving geologists more time to concentrate on higher-value work. The processes are intuitively grouped to import and validate drillhole data. Domains are defined before generating geological models and publishing them. Repeatable steps make it easy to experiment, and changes made to domains are immediately reflected on the model. GeologyCore can be used for a variety of projects. It offers a machine-learning option that is cloud-based, alongside traditional modeling methods like vein and implicit modeling.

Surface and underground mine operations benefit from dedicated workflows and reporting features that improve efficiency and productivity. With intuitive point cloud processing, you can get a clear picture of your project's status. Process and combine the point cloud data from Maptek's laser scanners, UAVs and other lidar sensors to create easy-to understand deliverables. Measure stockpile volume with ease, update survey models at the end of each month with new field data and analyze geotechnical risk that could impact your operation's safety. PointStudio gives you the tools to accurately quantify and communicate conformance with design. PointStudio can be delivered on the Maptek Workbench to ensure interoperability with all Maptek solutions. Users can easily create workflows to automate site processes and standardize them. Custom toolbars and menus can be easily configured to suit individual work patterns, standardize processes across sites and operations, and adapt workflows.

DUG Insight lets you focus on geoscience and help you make your next discovery. DUG Insight, a fully-service interactive software platform, allows you to process advanced seismic data and image, interpret, visualize, and QI--across marine, land, and ocean-bottom survey surveys. DUG's multiparameter FWI imaging is also included for innovative least-squares imaging solutions. DUG Insight is a new approach to geoscience. It combines powerful features with an easy-to use interface. DUG Insight's processing module and imaging module allow you to access a variety of key technologies that will turbocharge your seismic workflows. These technologies include deblending and noise removal, designate, multiplex, data regularisations, imaging, post-migration processing, and data regularisation. DUG Insight's interactive platform and interpretive platform allows you to process your data and meet your OBN, land, and marine processing and imaging requirements.

RokDoc is the culmination of over 20 years of industry experience and innovative research. RokDoc provides a seamless interface that integrates everything from data quality control and modeling and prediction. It also integrates multidisciplinary workflows for Quantitative Interpretation and Pore Pressure. Assess sandstone, carbonate, and shale reservoirs for improved hydrocarbon exploration and production optimization, CO2 sequestration and geothermal surveying. RokDoc offers a comprehensive and extensive library that includes rock physics, cutting-edge seismic inversion techniques, as well as a complete geomechanics solution. Automated and easy evaluation of geological "what-if" scenarios. To better understand the probability and success of subsurface resource exploitation, and stored fluid monitoring, capture uncertainty in data and models.

Maptek creates easy-to-use, smart software for mining, aggregates, and civil engineering applications. PointModeller is the latest solution for processing point clouds collected by drones or other sensors. PointModeller converts drone or other lightweight mobile sensor point clouds into deliverables that are suitable for civil, topographic and quarry operations. PointModeller converts your 3D point cloud into deliverables using powerful 3D visualization tools, smart filters, and interactive manipulation. Powerful, intuitive tools help manage stockpile inventories through accurate volumetrics. They also create topographic or 3-D surfaces and track digging compliance. PointModeller can help you increase your productivity and optimize workflows in civil, topographical, or quarrying applications. A cost-effective subscription package that provides decision support for drone or mobile sensor users.

Most likely, we don't know the thickness of the source rock in our kitchen area. We also don't know the heat flow or secondary migration losses. You can only rank prospects by running different scenarios with these parameters. Prospects that are charged in the most scenarios will have the lowest risk. Top seal capacity, unconformity and source rock facies are all possible risks. There is also the possibility of different interpretations of seismic. It is absurd to invoke multi-component Kinetics when we don't know the thickness, TOC or HI of the source rocks. Drag and drop your interpreted surfaces to Trinity and draw cross sections interactively through them. You can move the cross section with the mouse to move through the data. In 3D, the cross sections look similar to fence diagrams except that fences can be moved. This will reveal a lot more geology than static maps.

GeoSpatial Manager enables dynamic, automatic updates on any survey surface in order to produce a single truth at any given time. GeoSpatial Manager combines smart visualisation tools with a web interface. The result is a simple-to-use management system for as-built surfaces, which can be accessed by all employees in an organization. This unique solution dynamically merges and updates surveyed surfaces. Users can manage, visualize and download any as built surface at any time during the project lifecycle and apply it to downstream activities. Determining your as-built surfaces now and at key times in the future improves understanding, collaboration, and efficiency. The solution allows for all surfaces to be accessed, and dynamically visualized, using a time slider. Centralized storage in a cloud or network server eliminates frustration and risks associated with locating survey files stored in different folders on local or server machines.

It is not always possible or practical for spatial phenomena to be predicted and modelled using real-world observations. ArcGIS Geostatistical Analyst allows you to generate optimal surfaces using sample data and make predictions for better decision-making. These tools are particularly useful for atmospheric data analysis and petroleum and mining exploration, precision agriculture, environmental analysis, and fish and wild life studies. ArcGIS Geostatistical Analyzer extension provides a suite interactive tools that allow you to visually examine your data before it is analysed. ArcGIS Geostatistical Analyst can help you quantify uncertainties if your data is incomplete or subject to errors. To perform risk analysis, create multiple versions of the same surface. Geostatistical simulation creates multiple surfaces that simulate the real phenomenon and give possible values.

Advanced seismic processing and imaging can condition data for depth imaging and interpretation. Companies can configure the system to meet their business objectives and user needs through modular design, open architecture, and compliance to standards. The most advanced seismic processing and imaging solutions available, including SRMA and 5D interpolation and Aspen Echos RTM. A library of over 350 modules that allows the construction of data-dependent processing workflows to solve current geophysical challenges. The industry's best interactive link between data, seismic applications, and parameters. Aspen Echos is the standard seismic processing system in the oil and gas industry for producing 2D and 3-D seismic images of subsurface.

Comprehensive seismic processing and QC software to process data acquired on-shore, offshore, or in a vertical seismic profile. VISTA desktop seismic processing software allows data processing from the early stages of acquisition QC to the final processing and interpretation 2D and 3-D seismic data acquired either onshore or on land. It also supports vertical seismic profiles (VSP) in all industry data formats. VISTA software makes it easy to navigate workflows and evaluate datasets with the interlinked and interactive displays. You can also add your own algorithms via the MATLAB SDK or C++ interface. Advanced processing capabilities are supported by the software, including AVO and angle analysis (AVA), multicomponent processing, 2D and 3D VSP processing, and AVO and angle of incidence analysis (AVA). Advanced field package, including full geometry QC and post-stack migration. The complete solution, including QC, prestack migration and time depth image analysis.

Katalyst is a leader in geophysical preservation and seismic segment scanning services for the oil & gas industry. Our proprietary software is based on more than 25 years of experience and allows us to offer clients a valuable and unique way to convert aging hardcopy paper seismic sections into digital format. Once the data has been digitized and stored, it can be used to enhance ongoing and future processing and interpretation activities. In many cases, historical seismic data in the exploration industry is only available in hardcopy format. These seismic sections often cover areas of exploration that do not have modern seismic coverage. Conversion of hardcopy sections to digital SEGEY data is a cost-effective way to obtain greater seismic coverage in areas that may not have any other data.

Lynx Exploration Archivist Seismic scanning and Vectorising (LEASSV software) is a comprehensive software solution that allows you to re-vectorize scanned sections of seismic sections and output the results as industry-standard SEGY format trace files. The suite includes utilities that allow output files to be prepared for loading into a seismic interpretation workstation, or for further processing. The Lynx Launcher allows you to access all Lynx programs from your Lynx desktop icon. It also contains utilities and applications. You can install from CD-ROM or downloaded setup files.

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

The suite includes utilities that allow output files to be prepared for loading into a seismic interpretation workstation and further processing. LEAMAP can be used either as a standalone program or integrated with LEASSV to provide a complete solution for reconstructing seismic data using images of sections and basemaps. A minimum system requirement is a computer running Microsoft Windows XP or Vista, 7, 8, or 10 (x86, x64). Snowbound Software Inc supports more than 60 raster file formats via its raster library. Standard Windows printer drivers support plotting. Locprep is an interactive editor that can be used to edit Lynx or UKOOA-type location files. These files store information about seismic shotpoint locations and general location information. Locprep can be used to perform many tasks with LOC files.

MESA is a cutting-edge software package that offers a complete set of tools to optimize onshore, offshore and transition zone survey design, planning, and optimization. Data acquisition is the core of the seismic lifecycle. It is crucial that accurate decisions are made right from the beginning of the acquisition design process. To accurately analyze the imaging objectives of seismic projects, you need flexible and robust survey design tools. MESA software meets these needs for both marine and land projects. It streamlines the planning and survey design process. Field-proven on land, with a towed streamer and OBS survey designs; also multi-component or VSP surveys.

Multi-survey structural interpretation and visualization is fast and easy. Multiple users can collaborate in one shared environment. Integrated analysis of multi-scale geophysical, seismic and geological data allows for reliable prediction of facies from well data. Comprehensive, integrated solution for seismic interpretation that includes industry-leading facies classifications and volume visualization workflows. Visual integration and interpretation at all scales, from regional to prospect. You can easily share data and projects with other members of your team without duplication. Interactivity and consistency among views speed up the interpretation process. This makes full use of high-speed graphics and large memory, as well as the fast connectivity of modern workstations. The user interface is intuitive and easy to use.

Borehole data is growing in size and complexity. It is stored in different formats and distributed, loaded, duplicated and loaded repeatedly between various databases. Access to crucial project data may be slow or impossible due to incomplete, inaccurate, or uncertain information. This makes it difficult for decision-makers to make fast-paced decisions. Recall™, Borehole Data Management Software is the industry's best solution for efficiently managing and publishing both raw and edited borehole data within one integrated system. Recall software has two databases. One for edited data, and one for raw data. Both databases work together as one integrated system. Data is only loaded once and quality control is performed once. Common queries and standardized naming conventions are used across both databases to reduce cycle time and redundancies caused by multiple copies.

GM-SYS can be used to train your earth models. Integrate seismic, well and geology data with observed gravitation and magnetics. International government surveys and exploration programs of the most successful energy companies worldwide trust GM-SYS extensions. Rapidly create new interpretations using the latest survey data. Then, use interactive tools to see if the model's calculated response matches the observed data. All your data can be gathered together to reduce risks when planning expensive surveys and drilling targets. Oasis montaj integrates GM-SYS extensions, allowing you to view your gravity and magnetic data alongside your other earth models. In a seamless workflow, import and integrate grids, slices, numeric data, and other teams' data. You can run efficient QA/QC checks in Oasis montaj, and immediately extract your clean data into GM–SYS to ensure that your model is based upon the most accurate data.

A survey-based viewer that is geographically accurate allows you to view seismic shot lines. Layers such as NTS grids and DLS grids, culture and wells can be incorporated. You can add lines, text, areas, and plot directly from your computer. Show 3D data in an outline or all points of source and receiver. Click on a line to open the database record. Third-party software can be used to link scans of documents in electronic image format (e.g. TIF or JPG) to allow viewing and printing. Many packages offer editing, faxing and e-mail capabilities. These features add more versatility to TerraSeisTM. Flexible searching tools that use your SEG-P1 or seismic line meta-data to locate lines consistently and uniformly. Your data can be inter-rerelated in creative ways that maximize the potential of your data. To assist in the selection of data sets for further processing, show key data elements in your locate window.

No matter if you are drilling a vertical well or an extended-reach one, a low or high equivalent circulating density (ECD), can cause serious drilling problems and compromise your project's finances. An optimal ECD is essential for a successful drilling operation. It is essential to accurately model the drilling process and optimize the drilling hydraulics. It allows engineers to plan ahead, improving drilling efficiency, reducing risk, decreasing non-productive times (NPT), and so on. Pegasus Vertex's HYDPRO hydraulics model covers all aspects of hydraulics including surge and swab and bit optimization, hole cleaning and volumetric displacements. These features allow downhole drilling hydraulic conditions to be thoroughly examined, and any potential problems identified before field execution.

Geochemistry can be applied to any phase of a field's life cycle: appraisal, development, production, abandonment, and exploration. Malcom interactive fluid characterization software provides geochemical engineering solutions through processing gas chromatography data (GCFID, GCMS, GCMS-MSMS, GC-2D etc.). Different vendors. Comparison of oil GC fingerprints gives information on biomarkers and reservoir connectivity. It also estimates the size of reservoirs and allows for production allocation calculation. Malcom software provides a complete suite of tools that can be used to process chromatography data. It also performs statistical calculation and allows for fast data interpretation. Improve reproducibility and repeatability in gas chromatography data processing by harmonizing the baselines and peak areas.

Maptek Vulcan is the world's leading 3D mining software. It allows users to validate technical data and transform it into dynamic 3D mine models, accurate designs and operating plans. When developing long-term or daily mine plans, it is important to know when and where to mine. The Vulcan 3D Visualisation Environment helps better understand mining project, with interpretations of results and decision support for profitable and productive mining operations. Vulcan is able to manage and visualise large and complex datasets. It can also process the data and quickly generate models. The sophisticated algorithms allow for virtually instant validation of the models, allowing users a continuous picture of a deposit.

EarthVision, developed by Dynamic graphics, is a software that allows for the creation and updating of 3D models. It is easy to create accurate maps and cross-sections. Reservoir characterization and volumetric analysis can also be performed. EarthVision's advanced 3D/4D viewers allow for model examination and interrogation within the context of datasets throughout the asset development teams. This improves and simplifies quality control, well-planning, and communication with managers, investors, partners, or other team members. EarthVision's workflow management streamlines the model-building procedure, allowing for complex models to quickly and easily be built through a guided geologically oriented approach. The workflow manager's intuitive interface, which only requires one-time data input, guides users through modeling fluid contact, salt domes and faulted structures.

AttributeStudio provides multi-attribute seismic interpretation as well as reservoir property prediction software. Integrated software system for seismic data interpretation and integration. It is easy to use. Geoscientists designed the system. Data I/O supports all industrial standard data formats. Comprehensive: Includes both basic interpretation workflows as well as advanced modules to predict reservoir properties using the most recent machine learning algorithms. Recent innovations. Regular updates include the latest innovations in seismic interpretation, visualization, or machine learning. Robust. AttributeStudio was built on a solid, 20-year-old software architecture. Affordable. Only license the modules you use in your work. Licenses for corporate teams are available at a discounted rate. Multiple attributes are required for fault surface tracking. Interactive attribute classification using cross plots in 2D and 3.

You can locate critical failure surfaces and calculate the safety factor using a combination global metaheuristic search methods with local surface-altering technologies. Results can now be generated in minutes with parallel processing for both failure searching as well as FS computations. Integrating 3D wireframes (representing geological surfaces, modeled faults and surveyed topography) can streamline your workflow and provide more detail. Directly into your 3D models. It is now easier and more efficient than ever to create slope stability models. Import surfaces from mine planning software or geological modeling. Or use built-in surface construction methods that use coordinates or borehole information. You can either build surfaces using point cloud data, or import block models from programs such as Vulcan, Deswik and Datamine.

You can create your own analysis graphs using a drag-and drop format. Choose from a variety of data types, displacements, coordinates and vectors. Additional information like site voltage is also available. You can change the data reference values, date ranges, and filter your data-set with filters like 24h averaging. For simplified reporting, design your analysis graphs. Then add them to your dashboard. Heat Mapping - Choose any data type you wish to display, adjust the time range, and then display the movement as a heat map. You can adjust the scale and weighting of heat mapping colors to meet your reporting needs. For quick site reference, overlay project imagery below your heat maps. To cross-reference data from multiple systems, you can integrate any number of prisms and types of sensors.

Geomage gPlatform: Time provides processor with an interactive graphical experience when working with seismic data. The Time Imaging package includes all the processing modules and applications required to handle any 2D/3D/4D seismological data, from field data to anisotropic prestack time migration.

A scalable, innovative data management infrastructure that improves collaboration, security and efficiency. The advanced, architecturally lightweight data management infrastructure can be scaled to multiple users and project. A centralized repository can be customized to meet the highest security standards, and it can be customized according to role-defined permissions. Teams from the seismic, petrophysics and geologic modeling fields can collaborate and interact within a common visualization environment with real-time data workflows. Import/export software with a variety of data formats allows exchange with the OSDU Data Platform as well as with third-party repositories. Teams of seismic, petrophysics and geologic modelers can share data and work in real-time. Common data models, services, interfaces and visualization platforms. Scalability is easy to adjust for changing performance needs and storage requirements as datasets grow.

SPW software is an interactive seismic processor system. SPW can be parallelized to run on multi-core processors that have threads on Windows 7 or Windows 10. SPW can be used on workstations, desktop computers or laptops. It can also be installed as a client/server configuration to meet large processing requirements on high-end server PCs. The SPW 3D package provides a complete processing system to process 3D P-wave seismic reflectance data. The system's strengths include data QC and interactive analysis. These allow for rapid control of data quality, and the checking of processing results.

DEPRO is a comprehensive torque and drag program. This software can help reduce the risks associated with drilling and completion operations. DEPRO calculates the horizontal well's length based on specific friction factors. It also recommends rig specifications and determines the weight required to set a packer. DEPRO covers hydraulics. It includes surge and swab and equivalent circulation densities, bit optimization, hole cleansing, and volumetric displacements. DEPRO allows for the complete examination of downhole drilling hydraulic conditions and the identification of any potential problems before field execution. Stress calculation, torque, drag, and tension calculations. Models for both soft and stiff strings. Drilling, back reaming and rotation off the bottom are all possible. Prediction of sinusoidal and helical buckleling. Comparison of field data on surface torque and workload. Friction factor sensitivity analysis. Analysis of packer setting.

MFrac Suite software allows you to create and execute well stimulation designs in both traditional and unconventional plays. This will maximize production and prolong the life of your well. You can improve your planning process and integrate real-time data, minifracs and hydraulic fracturing. This will help you to make better decisions and arrive at meaningful reserves estimates. Our hydraulic fracturing analysis and design software allows you to pinpoint the most productive zones, determine effective fracture treatment options, and monitor reservoir stimulation in real time. Since the beginning of frac modeling, our software has been a support tool for engineers. We are now delivering a step-change of efficiency and capability to people responsible for unconventional well planning and stimulation modeling.

DecisionSpace®, 365 Essentials is an industry-leading exploration and production (E&P), which provides the best performance at a reasonable price to help you run your business. This software is flexible and you only pay for what you use. Advanced seismic processing technology and QC workflows allow you to gain a detailed and insightful understanding of subsurface. Optimize your well operations to increase productivity Start without any data entry or report configuration. You can jump start your economics evaluations by having instant access whenever and wherever you need it. Self-service well construction software that reduces well preparation time, increases reliability, and maximizes well productivity.

This makes it easier for engineers, geoscientists and drillers to collaborate. Your software doesn't have to be complicated, even though the world of oil & gas is becoming more complex. Kingdom™, which integrates geoscience, engineering, and geophysics, makes it easy for asset teams to make faster decisions, from exploration to completion. Our solutions are simplified, giving you access to advanced geoscience/scientific tools that are affordable, easy to learn and install and come with excellent support and training. Kingdom is optimized for unconventional, conventional, and deepwater plays. It allows you to assess the potential of regional geologic trends or find out where assets are underperforming. All this in a single, cost-effective, and easy-to-learn environment. Kingdom Geosteering will get you to the zone 95% of all the time. Collaboration increases productivity in geology and allows for better predictions.

Galaxy4D is a 2D/3D modeler and stratigraphic tool that provides reservoir engineers and geologists with a powerful and flexible tool. It greatly reduces the time required to build, update and manage reservoir models. It also increases knowledge and understanding of the reservoir. Field development programs can be developed faster and with fewer risks. Galaxy4D's strengths are in its simple and logical workflow. Its modules and displays are easy to use, interactive, and efficient. Galaxy4D can estimate saturation distribution using logs (RSTs). You can create unified catalogs that include reservoir descriptions, engineering, geophysical, seismic, and other data. Analyze the histograms for reservoir properties for single wells or multiple wells for 2D or 3D data sets on a zone-by-zone or defined area basis.

OMNI 3D seismic design software allows you to create optimal 2D or 3D designs for land and marine, ocean-bottom cable, transition zone, vertical seismic profile, and multicomponent surveys. Advanced analysis modules allow you to analyze geometry artifacts, examine geometry effects, generate synthetics, build and ray trace 2D or 3D geological models, and more. OMNI 3D software bridges the gap between E&P asset teams and acquisition teams with its advanced tools, easy-to-use interface and multiproject handling. These features make OMNI 3D software a standard in the industry for geoscientists involved with survey planning, design and QC. Advanced analysis modules include synthetics, 3D geometry assessments, trace quality estimations using 5D interpretation, AVO Response, illumination on a subsurface horizontal using any survey geometry and post-stack time migration illumination via Fresnelzone binning