Alternatives to Keysight VEE

SPEC Innovations' model-based systems engineering solution is a great way to help your team reduce time to market, cost, and risk for even the most complex systems. This on-premise or cloud application uses a modern web browser with an intuitive graphical user interface. Innoslate's full lifecycle capabilities also include: * Management of Requirements * Documents Management * Modeling * Discrete Simulator * Monte Carlo Simulator * Views and Models from the DoDAF * Database Management * Test Management, including full reports, status updates, and results. * Real Time Collaboration

LabVIEW provides a graphical programming method that allows you to visualize every aspect of your application including hardware configuration, measurement data and debugging. This visualization allows you to easily integrate measurement hardware from any vendor. It also allows you to represent complex logic on a diagram, create data analysis algorithms, or design custom engineering user interfaces. LabVIEW and the NI DAQ hardware allow you to create a custom measurement solution that can visualize and analyze real-world signals and make data-driven decisions. LabVIEW, NI and third-party hardware can be used to automate product validation in order to meet difficult time-to-market or performance requirements. LabVIEW allows you to create flexible test applications that control multiple instrument and design user interfaces to maximize your manufacturing test throughput. LabVIEW makes it easier to create industrial equipment and smart devices faster.

EEZ Studio is a unique solution for rapid development of an appealing GUI and remote control devices for Test and Measurement (T&M). EEZ Studio was developed by a team of experts with extensive experience in designing complex embedded devices that are resource-constrained. It allows the design and development of responsive desktops, embedded GUIs and flowcharts (EEZ Flow). The use of a series of Widgets, Actions, LVGL support as well as ready-to-go templates and examples allows for rapid prototyping and development of final applications. The EEZ Studio is equipped with everything you need to create, test, and debug responsive and attractive GUIs. It can also meet the most complex requirements. Depending on the application, different types of projects can be created to simplify the development process and address the challenges of a particular target platform.

You can go beyond math-based modeling by using a complete RF-aware design process. This workflow includes decades of Keysight measurement science in RF instruments, which is available for all system architects. PathWave System Design is the best platform for prototyping complex RF systems. It offers faster simulation speeds, near-circuit fidelity and libraries for radar, electronic warfare satellite, 5G and WiFi. Plus, it integrates with many partners. Your system designs can only be improved by statistical models for propagation or channels. With the help of tools like STK by AGI, Ansys Company, dynamic kinematic modeling is possible for electronic warfare, radar, satellite, 5G and automotive. Trusted reference libraries based on Keysight measurement science are essential for advanced cellular system designers. Researchers working on the next generation communications signals require a flexible platform to develop and test physical layers.

InstrumentStudio allows you to unify your display and export instrument configurations. You can also monitor and debug an automated test system. You can view data on unified displays using large, high-resolution monitors. Then, you can capture multi-instrument screenshots as well as measurement results. You can save project-level configurations to make it easier to test with the specific devices under test. Or export configurations to TestStand or programming environments to simplify your code and parametric sweeps. You can also use InstrumentStudio parallel to your code to monitor and troubleshoot running test applications. InstrumentStudio is an integrated environment for instrument configuration. It simplifies and augments automated production testing systems.

FlexLogger allows you to create flexible, scalable data-logging system with NI DAQ hardware. No programming is required. You can create sensor-specific configuration workflows that allow you to quickly set up, visualize and log a variety of synchronized measurements from analog and digital sensors, as well as vehicle communication buses. You can also generate voltage and current or digital signals to drive actuators and control set points. FlexLogger automatically saves metadata about your test configuration. This allows you to quickly trace test results and compare them across multiple tests. The integrated data viewer allows you to interactively view test results and draw conclusions. FlexLogger automatically synchronizes mixed signal measurements so that you can accurately analyze data across different sources to ensure physical components work according to design specifications.

ITEM Software is a world leader in the supply and maintenance of reliability software for engineering. ITEM Software is the best choice for your business if you are involved in Reliability (RAMS) evaluation. We are committed to providing our customers with the best products and after-sales service. Our products are constantly being updated in response to user needs and current software technology. Software specialists and engineers are available to provide support. We offer training in this area as well as the use of our software products. These analysis tools are available individually, in any combination, and as a complete package.

20-sim is a modeling software package that simulates mechatronic systems. 20-sim allows you to enter models graphically in a similar way as drawing an engineering plan. These models allow you to simulate and analyze multi-domain dynamic systems, and create control systems. For rapid prototyping or HIL-simulation, you can even generate C code and run it on hardware. 20-sim offers features that make it easy to create models quickly and intuitively. You can create models with equations, block diagrams and physics blocks. You can build models, simulate them, and analyze their performance with a variety of features. The 20-sim editor allows you to build models. This editor has a large model library that includes building blocks that can be used to build models. Many components are included in the model library, including block diagrams and bond charts.

VeriStand software allows you to configure I/O channels and data logging. It also supports stimulus generation and host communication for NI hardware. You can also import simulation models, control algorithms, responds to events with configurable alarms and enable test automation with macro record, TestStand and other software. A run-time editable user interface allows you to interact with the application and monitor alarm states and system execution metrics. You don't need to be a programmer to add custom functionality to VeriStand. VeriStand allows test engineers to reduce the time it takes to test their products. It offers a wide variety of functionality, including configurable data acquisition and simulation model integration, test sequencing, logging, and log logging. Learn how VeriStand can help you develop, deploy, run and manage your real-time testing.

SystemLink automates manual tasks that are required to keep test systems up-to-date and healthy. SystemLink provides key information to improve situational awareness and test readiness, enabling you to deliver quality throughout the product lifecycle. SystemLink ensures that software configurations are accurate and that test equipment meets quality standards. Use an automation and connectivity platform to your advantage SystemLink consolidates test and measurement data from all test system into a single data repository. SystemLink provides users with instant access to asset utilization, calibration forecasts, test results history, trends, production metrics data, and test result history to help them make proactive decisions about capital expense, maintenance events, or product modifications.

Studio 5000®, a design environment, combines elements of design into a single framework that maximizes productivity and reduces the time it takes to complete a commission. This intuitive integrated design environment is focused on rapid design, reuse, collaboration, and virtual design. Studio 5000 applications share a common user interface. Studio 5000 Logix designer® allows users to collaborate to design and maintain their systems. Studio 5000 Architect® allows you to jump-start the creation of your first system for control and visualization applications. Studio 5000 Simulation Interface connects controllers – physical or emulated – to simulation and modeling tools to allow virtual commissioning and model-based designing.

It provides a comprehensive solution to unite engineering processes, encapsulating knowledge, and driving performance across physical and CAE simulation departments. Aqira offers global licensing access to a cost-effective solution that allows you to gain insights from machine learning, advanced data science, and big data analytics. Apps allow engineers with different experience to share valid, up-to date analytical processes. This will improve the quality of analysis as well as productivity. With built-in data search capabilities, you can save time and avoid unnecessary testing by reducing the time it takes to find the right data. You can effectively manage access to expertly defined processes while still allowing for global organization.

AVSnap's interface is simple to use and easy to learn. All features are available at your fingertips. Do you need to do technical sales? No problem, get your diagrams ready in record-time. Do you need to design an entire Audio-Visual system. No problem: Use manufacturer component libraries to speed up the design process. Do you need to control equipment? No problem: Use the built-in GUI designer to create a simple control code that will make your system fully functional in a matter of hours. The Library Editor is the heart of AVSnap's power. You can draw your symbols, add snap points, and adjust functionality. Although it takes only a few steps to create a library element, the dividends will pay off long after it is completed. They can be reused anywhere in the design once they are created. AVSnap can control any controllable device. It can adjust the volume, lower the shades, turn on video inputs, open the garage door, adjust the temperature, detect presence, send emails, communicate via TCP/IP, and rs232.

Artura is an innovative, constantly evolving product that solves the problem that all system designers, project managers and system integrators are familiar with. Engineer, design, and propose technical systems, such as AV, IT Security, Lightning etc. Different people use different tools, which are not always designed to do the job. This leads to time-consuming, repetitive tasks, an inefficient documentation flow, and no central overview. There is no central source of truth for design and scope changes, while the project is rife with operational inefficiencies. Artura is the solution. It is a collaborative tool for designing, engineering and generating proposals. Artura is a modern, easy-to-use, online web application that allows you to design systems, create proposals, and engineer them. For your team, client, and other stakeholders.

Valispace is trusted by companies across all sizes, helping fast-moving companies to develop better products in automotive, aerospace, industrial tech, robotics, energy and many more sectors.

Utilizing modeling, analysis, and decision support workflows, you can reduce technical engineering-based risks that could impact performance, operational availability, and the cost to maintain. MADe helps you make better decisions about safety/mission critical equipment support at every stage of the product's lifecycle. Reduce risk by using interdependent analysis capabilities that take into account the technical, economic and operational requirements of the system's maintainer and/or operator.

Ansys SCADE Architect was specifically designed for system engineers. It supports all industrial system engineering processes such as ARP 4754A and ISO 26262 as well as EN 50126. SCADE Architect allows for architectural and functional system modeling and verification in a SysML-based environment. Ansys SCADE Architect was specifically designed for system engineers. The underlying SysML(tm technology is hidden, making modeling easier and more intuitive.

The building is becoming more complex due to the addition of many related items. This multifaceted nature means that more partners should be included from different designing areas. These diverse areas require a mix of languages, devices, and databases. As a way to bring together partners, associations receive model-based frameworks engineering (MBSE) systems as an important part of their application lifecycle exercises. These systems offer a typical, visual dialect, and organized designing methodology.

Advanced requirements can be met with a comprehensive fluid and electrical planning software environment. E3.series is a real concurrent electrical engineering environment that supports advanced requirements for electrical documentation and wire harness design. E3.series allows for efficient and accurate design and manufacturing processes for electrical and fluid planning, wire harness and cabinet layout, as well as cable planning and cable planning. Its object-oriented architecture allows for a consistent and integrated design approach that reduces design time, eliminates errors, and improves quality. Object orientation ensures consistency in all design phases. Powerful automated operations and electric checks. Comprehensive outputs for manufacturing or documentation. Native format library and design data administration. Circuit diagrams, connection list, layout plans, and reports are always up-to date and synchronized.

System Composer™, enables the specification, analysis, and modeling of architectures for model-based system engineering and software architecture modelling. System Composer allows you to assign requirements and refine an architecture model that can be used to design and simulate in Simulink®. You can create architecture models that include components and interfaces directly, import them from other tools, or use the Simulink architectural elements to populate them. Multiple architecture models can be used to describe your system and establish direct relationships among them using model-to-model allocations. Sequence diagrams, state charts, and Simulink models can capture the behavior of a system. Simulink and embedded coder® allow you to simulate the execution order of components and generate code using your software architecture models.

Cameo Systems ModelerTM™, an industry-leading cross-platform collaborative Model Based Systems Engineering (MBSE), environment, provides smart, robust and intuitive tools to create, track, and visualize all aspects in SysML models and diagrams that are compliant with SysML standards. The environment allows system engineers to: Run engineering analysis for design decision evaluation and requirements verification; continuously check model consistency; and track design progress using metrics. Remote repositories can store system models as standard XMI files or be published to documents, images and web views to address various stakeholder concerns.

Altair Activate is a tool that can be used to model and simulate a wide range of products. It's a system-of systems that allows you to find better designs faster. Every industry is becoming more complex and electrified. They are also smarter and more connected. Multi-disciplinary system-level simulation capabilities allow for smart, complex mechatronics systems to be developed holistically. This allows for more efficient product development teamwork and workflows. Altair Activate breaks down silos between mechanical subsystems, electrical subsystems, control subsystems, electronic subsystems, software, hardware-in-the-loop, data analytics, and more. To model thermal-fluid system dynamics with 1D modeling simulation, rather than 3D CFD, to produce nearly as-accurate results much faster - to allow more design exploration and optimized performance.

Drag and drop from the many built-in and expandable model libraries allows you to build multidomain, industrial-strength models of your entire system. The Wolfram Language provides a powerful environment for quickly understanding, analyzing and iterating on system designs. Creating insight, innovation, and results. Real-world machines, systems, and networks are not limited to one physical domain. Models can include any combination of interconnected components from any number domains, mimicking real-world topology. Exploration is quick and easy. All values can be accessed from any component of your model with a click. Zoom in on a specific area of interest to see the built-in plot styles. Access the full model equations, and simulation results of your models to perform your own symbolic and numeric computations. Your model analysis will benefit from the full power and flexibility of Wolfram Language.

You can manage your needs, epics and user stories through a series sprints. Each sprint uses your choice of requirements management, model-based systems engineering (MBSE), and test management. You can also choose to use formal change control, configuration management, and change tracking. Cradle®, our requirements management and systems engineering software tool, integrates your entire project lifecycle into one, highly scalable, integrated, multiuser product. Cradle can handle all your requirements management, model driven, defect tracking, and test management needs, no matter how small or large your projects may be. Cradle's unrivaled feature list, flexibility, simplicity, and low cost make it the perfect choice for anyone new to agile methods, systems engineering, or requirements management.

Since 1993, thousands of projects have been completed and tens to thousands of system engineers have used CORE. CORE was the first to embrace model-based systems engineering. CORE combined the power of a system metamodel to integrate systems engineering and powerful view generators to produce diagrams instantly with guaranteed consistency to support a generation in systems engineering success. GENESYS is the right choice today for organizations, but Vitech continues to support clients and projects that rely on CORE to fulfill their systems engineering requirements. As important as designing and controlling interfaces in system designs is, managing the interrelationships of data is crucial to project success.

Simcenter Amesim, the most integrated and scalable platform for system simulation, allows system engineers to simulate and optimize mechatronic system performance. This will increase overall system engineering productivity, from the initial development stages to the final performance validation and controls calibration. Simcenter Amesim is a combination of ready-to-use multiphysics libraries and industry-oriented solutions. It supports powerful platform capabilities that allow you to quickly create models and perform analysis. This open environment can be easily integrated with major computer-aided designing (CAD), computer-aided engineering and controls software packages.

It has thousands of pre-built models, which cover a wide range engineering disciplines. You can search for the model that best suits your design requirements and it will target you with broad support. The Embed library contains motor models and motor control algorithms for both sensored applications and sensorless. This library can be used to accelerate embedded motor control projects for any type electric motor, including BLDC, PMSM and stepper motors. Embed allows users to easily model and simulate end–to–end physical layer data communication systems. This includes determining the energy and bit needed for a given bit error rate and a comprehensive set modulation, encode, and channel configuration.

Relativity is a web-based platform that projects in civil and construction engineering use for requirements management and system engineering. It eliminates the need for multiple spreadsheets and isolated applications. Relativity has been proven to increase project control, reduce project risk, and lower failure costs. Relatics is used for building, roads, tunnels and railways by contractors and consulting firms.

At Revalize, we empower businesses to design, model, develop, and sell effectively, enhancing outcomes across the value chain. Our solutions ensure efficiency from idea to cash, even in volatile markets. With best-in-class CAD, PLM, and CPQ solutions, supported globally, we're your partner in reducing costs and simplifying complexity. Our advanced CPQ platforms optimize your sales-to-production process, setting you apart from competitors. Focus on revenue growth and simplifying operations with a polished customer experience. We cater to various industries, from hospital equipment planning to infrastructure lighting design. Our tools aid architects and designers in crucial projects, streamlining the design-to-cash process for specialty manufacturers. Revalize offers leading CPQ, product, and design solutions to manage inventories, visualize product configurations, and meet specific industry needs. Wherever your business journey starts, greater outcomes start with Revalize.

A Digital Thread is a graph that has nodes that are elements in enterprise repositories, tools and version control systems. Its edges are intra-model relationships within each tool, as well as inter-model relationships managed by Syndeia. Syndeia offers model transformation services to create the digital thread graph. This includes drag-n-drop requirements between Jama or DOORS NG to SysML, generation of Simulink models and part structures from SysML models. It also connects behavior elements in SysML with software code in GitHub. You can also track the development status for a sub-system directly from SysML. Syndeia offers services to search, compare and bi-directionally synchronize connected model in the digital thread. This includes comparing SysML and Simulink models and syncing changes in DOORS NG requirements to SysML.

Capella Professional Deployment. We provide a customized Capella-based, industrial-grade MBSE bench ready for your most-critical projects. Integrate with Your Specifications. Capella can be configured and extended to meet your specific engineering needs. Capella teamwork. You can also work with your team concurrently. Collaborative features allow large teams to work simultaneously on the same model. Capella team. Capella solutions. You can ensure a successful deployment Enjoy our long-standing partnership with Thales, creators of Capella. Training, Coaching, and Support. Why Obeo? Capella has been our involvement since the beginning. Open. Obeo, a main Thales partner, is a key player in the development of the Capella ecosystem and workbench. We are an Eclipse Strategic member and provide several Capella add-ons (Team For Capella, M2Doc), so we know the technical.

GENESYS, based on the insights gained over 20 years working with CORE, is Vitech's next-generation software. It delivers connected systems engineering across an enterprise. GENESYS was reengineered from the ground-up to implement proven model-centric approaches that leverage modern technologies in an open architecture. GENESYS combines the power of a full MBSE environment and the usability modern office tools with your desktop, engineering, enterprise environments, and other areas to deliver your data your own way. GENESYS combines a model-centric approach to systems engineer with an enterprise-ready architecture. This allows you to seamlessly and consistently deliver model-based systems engineering across your project team. GENESYS eliminates the guesswork from implementation and delivers context-driven modeling for complex system engineering problems.

Enterprise Architect is an enterprise-wide solution that allows you to visualize, analyze and model, test, and maintain all your software, processes, and architectures. Enterprise Architect is the perfect platform to help you manage your workspace, support your team, encourage collaboration, and build confidence in your most complex projects.

IBM Engineering Lifecycle Management is a comprehensive, end-to-end engineering tool that is at the forefront of its market. It seamlessly guides you from requirements through systems design, workflow and test management. It extends the functionality of ALM to improve complex-systems' development. By adopting a holistic view of the entire product lifecycle and enabling digital data traceability, it is easier to track changes, reduce risk, and minimize costs. Use modelling and reuse to gain insights, and automate reporting for more accurate information. The digital thread's bi-directional data will provide functional, software, mechanical and electrical engineering domains a single source for truth.

IBM® Engineering Systems Design Rhapsody (Rational Rhapsody), and its family of products, offer a proven solution to modeling and system design activities. This allows you to manage the complexity that many organizations face when it comes product and system development. Rhapsody is part the IBM Engineering portfolio. It provides a collaborative design environment and test environment for system engineers. It supports UML and SysML as well as UAF and AUTOSAR. This solution allows for the control of defense frameworks (DoDAF/ModAF, UPDM), and speeds up industry standards like ISO 26262, DO-178B/C, and DO-178B/C. Continuous validation is possible through rapid prototyping, simulation, and execution. This allows you to correct errors sooner than they become costly. Automated consistency checking can improve agility and collaboration to reduce both recurring as well as non-recurring costs.

Map3D is a self-contained 3D stress analysis tool that allows for quick, easy model building and visualization. Map3D's ability to handle a wide variety of 3D problems is what sets it apart from other analysis tools. The built-in CAD functionality allows for the creation of complex, large, and fully 3D problems. Combining both FF elements and DD elements allows simulations of 3D excavations that include intersecting fractures and shear planes. Map3D supports plastic Fault-Slip as well as 3D rock-mass plasticity. All versions of Map3D have compatible input files, which allows for easy upgrades to more advanced capabilities. Comprehensive training program to help you understand the program's functionality and interpret your engineering results. It is easy to manipulate results for interpretation of rock mass failure, slip on fault planes, results from oriented bore holes, ubiquitous slip-on bedding plans, or joint sets.

Systems engineering projects are more likely to succeed when every stakeholder can contribute easily to the process. However, most people don’t have the skills or training required to use traditional SE tools or to work with the complex modeling languages used in SE practices. MapleMBSE allows for broad engagement by providing Excel-based, task-specific interfaces to each activity in your SE projects. You can give all stakeholders access through a live, two way connection to your system model. This will allow them to collaborate faster, avoid errors, reduce unbudgeted cost, and make the process more efficient.

PETS®, an engineering software product, combines over 30 commonly used engineering calculations into one product. PETS®, software calculates Physical Properties and Hydraulic Analysis. It also calculates Relief Calculations, Instrument Sizing, and other calculations. PETS®, which also calculates Equipment Sizing, such as pumps, compressors and tanks, vessels, spheres, drums, columns, exchangers, air coolers and more. PETS®, is used by Process, Chemical, Production, Mechanical, Instrument, and other Engineers. PETS®, is used in Refineries and Chemical Plants, Utilities and Equipment Manufacturers, among many other industries. PETS allows you to design, analyze, and troubleshoot any process. PETS®, with its graphical user interface, is easy to use and provides reliable results. Choose a tool from the over 30 available, and then enter the data. The interactive PETS®, environment allows you to perform calculations and update them as you enter data. The data can be saved or printed.

Measure-X®, metrology software, offers power without intimidation. It can be used to create part measurement routines or to operate an OGP system within a production environment. Measure-X®, a metrology software, offers a complete set of image processing tools and autofocus, as well as geometric functions, ANSI/ISO tolerences, easy editing and contour analysis. Compatible with touch probes and lasers. When datum features are large enough to allow for mobility, users can address more complex GD&T needs such as true position and profile of features. Display and reporting capabilities provide both graphical, colored whiskers of deviation and GD&T callsouts on the part CAD.

SpatialAnalyzer, the best portable metrology software for large-scale applications, is the most popular. SA is an instrument-independent, traceable 3D graphical software platform that makes it easy for users to integrate data from multiple instruments and perform complex tasks simply, ultimately improving productivity. SA is a highly flexible, instrument-independent, traceable 3D graphical software platform that makes it easy for users to inspect parts. Analyze data, report and reverse engineer. You can interface with almost any portable metrology instrument and automate complex operations to increase measurement and inspection efficiency. A wide range of problems can be addressed, from simple to complex. You will save time, money, effort, and ultimately, productivity. You can achieve goals you never thought possible by establishing a return on investment. Instrument-independent, SA can simultaneously communicate with virtually any number and type of portable metrology instruments.

TANGRAM is a flexible, intuitive, and very capable metrology software. It does not require any programming knowledge and can be tailored to the needs of each customer. TANGRAM was developed for users that need simple, easy-to use metrology software. TANGRAM is the final component of the flexible gauging system and CMM functionality. It offers the right balance of functionality, performance, and usability. In-line, graphic element reporting simplifies the evaluation of element form and position deviation. Simplified and advanced creation of reference systems. Measurements can be stored in Access databases and accessed by other applications for special calculations, statistics and integration with other applications. Advanced users can add special calculations using a Pascal-like internal language. Geometric tolerance and relationships between elements, and a dry-run mode to check program flow.

Renishaw's MODUS provides a powerful platform to measure 5-axis. A configurable interface allows native DMIS to be developed off-line, drawing geometry, embedded measurements, and tolerance data directly from CAD. Full simulation is also possible. The software contains algorithms that are certified for feature measurement, feature creation, and part alignment. The software allows offline creation of programs directly from CAD, with on-screen probe paths verification. The CMM environment, fixture, and location of the part can be defined to enable full simulation of 5-axis measurements programs. This reduces CMM downtime, as the programs are ready to run when they arrive at the machine. MODUS has a wide range of reporting capabilities, including CMM text reports that can be formatted in any way you like. Graphical reporting allows results to be displayed on the CAD model. This includes whisker charts or 3-D form plotting.

The IA software's role is to automatically collect measurement results from the test instruments assigned to it. It will then display this data to the tester and offer many other editing, analysis, and audit features before sending the data off to the production floor, or other testing laboratories. Each IA includes a driver program that can pull data from any instrument with an output electronic. AcquiData's extensive library of driver software programs has been developed over the last 30+ years for virtually every materials testing instrument currently in use. In the browser environment, multiple IA programs can be run simultaneously on one PC, allowing different samples to tested by different technicians at the same time. Lab Server is the heart of Testream(r/CS). The Lab Server program's main job is to control information flow into and out of the various laboratories within the system.

Our STARe software sets the standard for thermal analysis. It offers virtually limitless evaluation options. Modularity, flexibility and automation are some of its unique features. The software helps you stay compliant in a regulated field. All of our thermal systems can be controlled by a single powerful software platform. We offer the most comprehensive line of thermal systems and instruments. Our thermal analysis software, STARe, is easy to use and powerful. The instruments receive measurements and experiments, and the curves are evaluated instantly based on user preferences. STARe is the industry standard in thermal analysis software. It is a software that is extremely flexible and offers almost limitless possibilities for evaluation. STARe is the comprehensive software that powers METTLER TOLDEO’s thermal analysis systems. It simplifies workflows.

TurnCheck is a fast and easy-to-use software that focuses on what you are trying to measure, rather than how it should be measured. Automatic feature extraction instantly finds and measures all parts features in a single scanning. You can easily view all basic shaft dimensions in one image. Rotational scans are available for runout and form measurements, providing plots that allow you to visualize the results. Pre-programmed components are automatically rotated to allow for intelligent and fast one-touch measurements. A large number of common thread types are included in an integrated thread library for easy thread analysis. Results such as pitch, major/minor size and more can be obtained quickly. Data points can be compared to a DXF including 2D GD&T. Additional data points can also be output into optional SmartProfile®, software for advanced GD&T and 3D analysis.

Are you looking for an easier, faster and more efficient method to create maintenance logbook entries for aircraft? Would you like easy access to frequently used phrases and recurring data, with simple methods for inserting them? What about the ability to create and print logbook entries in just minutes? Look no further, the Aircraft Maintenance Logbook Enter Creator is exactly what you need. With the help of this tool, you will be able quickly and efficiently to create professional-looking entries. Logbook Entry Creator has been updated. We are committed to making the Logbook Entry Creator the best possible program. Version 2 has some changes. (1) You can insert your own graphics/company information into the entry. This can be done as a header or footer. This program is designed to make it easier and faster to create a logbook entry document detailing maintenance performed.

Better data means better results with any photogrammetry software. Compatible with DJI and Autel drones. Based on 6 years of Map Pilot feedback, all new and completely updated. Map Pilot Pro allows you to design and fly the best flight path to create amazing maps using Maps Made Easy's map processing service. You can either use our Maps Made Easy online tool or your photogrammetry software to create the final product. Mapping has never been simpler. Maps Made Easy's FlightSync can sync all flight logs and mission plans to aid in creating the best maps. Map Pilot Pro is a companion application that collects data for Maps Made Easy's processing platform.

Our user interface was designed to be as simple as possible. RISA-3D is able to create geometry graphically in multiple views with advanced modeling tools, or directly using spreadsheets to enter data. RISA-3D's analysis tools and design features make it easy to quickly design structures in a variety of materials. You can design buildings, bridges and tanks, as well as culverts. You and your colleagues can create reports that include both numerical and graphical results. This will give you and your colleagues complete confidence in your design. RISA-3D's latest interface was designed with structural engineers in mind. It is easy to navigate through a model from conception through final design optimization using the familiar tab-by-tab ribbon layout. Users can also customize the interface to ensure that their most frequently used tools are always available.

Elements®, a 2D CAD-based software for metrology, is ideal for measuring parts that have a high feature density. It can create measurement routines from 2D CAD data with ease. It then optimizes measurement paths automatically to ensure that data is collected as quickly as possible. Elements' advantage is its ability to handle large numbers of discrete features efficiently and quickly. CAD formats that can be imported include DXF and Gerber as well as CSV locations lists. The advanced review mode allows users to inspect specific features in real-time after a run is completed. The coarse alignment feature allows for the positioning of finders in real-time to be updated for more accurate measurements. The built-in analysis tools make it easy to analyze large data trends. These tools include scatter plots and histograms for dimensional values as well as whisker plots that show deviations from nominal. Evaluate your measurements and recommend the best solution for your needs.

Design and analysis tool for standalone photovoltaic systems. Hourly simulation, uses hourly weather files (239 U.S. locations). Sandia Labs PV Model. PV-DesignProS-S Enhanced Version developed in collaboration with Sandia National Labs Photovoltaic Systems Department.