Alternatives to GPT GES

SkyCiv Structural 3D, a cloud-based Structural Analysis program, allows users to design, analyze, and model complex 3D structures. It can be used online and does not require installation. SkyCiv Structural 3D is the best online structural analysis. It includes the following: – Powerful Analysis: Linear and P-Delta Cables, Buckling Plates, Frequency RS - Integrated design checks for steel, wood connections, foundations wind (AISC. NSD. AISI. EN. AS. CSA. BS plus more ...)

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Galaxy4D is a 2D/3D modeler and stratigraphic tool that provides reservoir engineers and geologists with a powerful and flexible tool. It greatly reduces the time required to build, update and manage reservoir models. It also increases knowledge and understanding of the reservoir. Field development programs can be developed faster and with fewer risks. Galaxy4D's strengths are in its simple and logical workflow. Its modules and displays are easy to use, interactive, and efficient. Galaxy4D can estimate saturation distribution using logs (RSTs). You can create unified catalogs that include reservoir descriptions, engineering, geophysical, seismic, and other data. Analyze the histograms for reservoir properties for single wells or multiple wells for 2D or 3D data sets on a zone-by-zone or defined area basis.

PLAXIS 3D provides the most important functionality to perform safety analysis and deformation for soil and rocks. This software is designed to allow you to model in 3D. Easy to create and scale construction sequences. Stable-state groundwater flow calculations can be done, including boundary conditions, material parameters, drains, wells, and drains. To model soil-foundation movement, such as slipping or gapping, use interfaces and embedded piling elements. You can get reliable results using realistic soil models and a full range of visualization capabilities. PLAXIS 3D provides different calculation types to address the unique geotechnical issues of soil structure interactions.

You can locate critical failure surfaces and calculate the safety factor using a combination global metaheuristic search methods with local surface-altering technologies. Results can now be generated in minutes with parallel processing for both failure searching as well as FS computations. Integrating 3D wireframes (representing geological surfaces, modeled faults and surveyed topography) can streamline your workflow and provide more detail. Directly into your 3D models. It is now easier and more efficient than ever to create slope stability models. Import surfaces from mine planning software or geological modeling. Or use built-in surface construction methods that use coordinates or borehole information. You can either build surfaces using point cloud data, or import block models from programs such as Vulcan, Deswik and Datamine.

The Petrel E&P platform combines transparent data flows and a simple-to-learn graphical interface--Petrel Reservoir Geomechanics-that supports the VISAGE sim configuration and results visualization. This allows the powerful functionality of VISAGE simulator to be seamlessly combined with other interpretation, modeling and engineering workflows within Petrel. The Petrel platform-enabled workflow allows you to include multiple data types in order to create new 3D stress and geomechanics properties, or to add geomechanics data for existing reservoir subsurface models. This seamless combination within Petrel ensures that the geomechanics model can be integrated with geophysics and geology as well as reservoir data.

Multi-survey structural interpretation and visualization is fast and easy. Multiple users can collaborate in one shared environment. Integrated analysis of multi-scale geophysical, seismic and geological data allows for reliable prediction of facies from well data. Comprehensive, integrated solution for seismic interpretation that includes industry-leading facies classifications and volume visualization workflows. Visual integration and interpretation at all scales, from regional to prospect. You can easily share data and projects with other members of your team without duplication. Interactivity and consistency among views speed up the interpretation process. This makes full use of high-speed graphics and large memory, as well as the fast connectivity of modern workstations. The user interface is intuitive and easy to use.

AttributeStudio provides multi-attribute seismic interpretation as well as reservoir property prediction software. Integrated software system for seismic data interpretation and integration. It is easy to use. Geoscientists designed the system. Data I/O supports all industrial standard data formats. Comprehensive: Includes both basic interpretation workflows as well as advanced modules to predict reservoir properties using the most recent machine learning algorithms. Recent innovations. Regular updates include the latest innovations in seismic interpretation, visualization, or machine learning. Robust. AttributeStudio was built on a solid, 20-year-old software architecture. Affordable. Only license the modules you use in your work. Licenses for corporate teams are available at a discounted rate. Multiple attributes are required for fault surface tracking. Interactive attribute classification using cross plots in 2D and 3.

SwiftComp is a multiscale, multiphysics composite sim code that delivers 3D FEA accuracy at the speed of simple engineering models. SwiftComp makes it possible for engineers to model composites as easily and accurately as metals using traditional structural elements in their FEA codes. This allows them to capture all the microstructural details while preserving accuracy. SwiftComp enables unified modeling of 1D (beams), 2D(plates/shells) or 3D structures. This allows for the calculation of all the effective properties. SwiftComp can be used independently to simulate composite testing or as a plug in to your existing structural tools that support high-fidelity composites modeling. SwiftComp can calculate the best structural model to use in macroscopic structural analysis and perform dehomogenization in order to compute the pointwise stresses within the microstructure. SwiftComp interfaces directly with ABAQUS and ANSYS.

The FEA program RFEM enables quick and easy modeling, structural, and dynamic calculation as well as the design and construction of models with member and plate, wall, folded plates, shell, shell, and other solid elements. Modular software allows you to connect the main program RFEM to the appropriate add-ons to meet your specific requirements. Structural analysis program RFEM 6 offers structural engineers a 3D FEA tool that meets all modern civil engineering requirements. Simple and complex structures can be modelled with ease thanks to efficient data input and intuitive handling. The basis of a modular software program is the structural analysis program RFEM. The RFEM basic program is used to create structures, materials, loads, and plans for spatial and planar structural systems that include plates, walls, shells and members. You can also create mixed structures and model contact elements.

CoreLog is a log analysis application and petrophysical modeling software. It is based on industry-standard model models and used to calculate the petrophysical properties wells. It calculates many properties, including porosity and permeability as well as volume of shale. CoreLog allows users to quickly and efficiently import and transform data, view plot information, calculate petrophysical property, and export data for other applications. CoreLog is a robust application that allows for easy manipulation and interpretation of data. CoreLog makes it easy to create markers and zones, modify plots, and print or export data. CoreLog presents data in a user-friendly format with tabbed views and tables. Tree views can also be used to improve productivity.

Geomage is a global company which develops and delivers advanced seismic processing and interpretation technology, services and software to a wide range of oil and natural gas companies. Geomage's seismic processing portfolio uses the multi-faceted MultiFocusing™, which has been proven to deliver the most precise subsurface imaging with greater stratigraphic detail and structural detail at hundreds of exploration sites around world.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

RokDoc is the culmination of over 20 years of industry experience and innovative research. RokDoc provides a seamless interface that integrates everything from data quality control and modeling and prediction. It also integrates multidisciplinary workflows for Quantitative Interpretation and Pore Pressure. Assess sandstone, carbonate, and shale reservoirs for improved hydrocarbon exploration and production optimization, CO2 sequestration and geothermal surveying. RokDoc offers a comprehensive and extensive library that includes rock physics, cutting-edge seismic inversion techniques, as well as a complete geomechanics solution. Automated and easy evaluation of geological "what-if" scenarios. To better understand the probability and success of subsurface resource exploitation, and stored fluid monitoring, capture uncertainty in data and models.

Multisensor GeoStreamer is the ideal platform to perform broadband imaging. Deep towing reduces weather impacts and improves acquisition efficiency. The recorded signal is not sensitive to changes in towing depth or local sea surface variations. This significantly reduces non-repeatable noise in reservoir monitoring projects. Pre-stack phase and amplitude are consistent in a frequency-dependent and angle-dependent way. Rich low-frequency signals enhance Full Waveform Inversion and improve subsurface property prediction accuracy. Multisensor wavefield separation allows for better shallow illumination. For standalone interpretation, near-surface images can be used that are not affected by acquisition footprint effects. Enhanced broadband resolution stratigraphy allows for the recovery of small time shifts due to changes in reservoir pressure and saturation during reservoir monitoring projects. GeoStreamer employs both velocity sensors and hydrophones to remove any ghost reflections from the surface.

GeoProbe®, the industry's leading 3D multi-volume interpretation software, is GeoProbe®. This software is designed to speed up interpretation workflows, from basin scale through detailed prospect analysis and reservoir analysis. GeoProbe software is able to analyze basin-scale volumes in the most immersive visualization environment. The software's (1) volume rendering technology, which improves fault detection and stratigraphic imaging, (2) powerful volume visualization techniques that enhance visual pattern recognition, and (3) interactive auto-trackers allow for precise interpretation. Optimized reservoir targets can be quickly created, well-defined and accurate. GeoProbe software technology supports efficient workflows with "real world" data volumes.

PLAXIS 2D LE and PLAXIS 3DLE allow you to model and analyze geoengineering projects that are limited equilibrium. These powerful software applications allow for rapid and comprehensive analysis of various conditions. You can create 2D and 3-D limit equilibrium slope stability models for soil and rock slopes. The comprehensive search tools and more than 15 analysis options allow you to take advantage of the extensive set of search methods. Multiplane analysis (MPA) is a method that enhances spatial slope stability analysis. Analyze embankments, dams and reservoirs as well as cover systems using earth structures and other hydrogeological settings.

Compare the tool responses of different vendors against your reservoir geology to determine the best tool and resistivity curves. To create high-accuracy final Inversions, integrate all memory data. For fast results, deploy the inversion module on High Performance Computing devices (HPC). To prevent the target zone from exiting and to keep the reservoir in place, calculate the distance to the bed boundary in real time. You can create phase shift and attenuation curves using non-azimuthal instruments, interval length, and parameters for 2-layer boundary mapping in real time. To predict a tool’s log response in advance, you can build an earth model of the formations that you are drilling. This will allow you to easily model resistivity effects such as shoulder effects, polarization Horns, and anisotropy.

Teams can work together using intuitive workflows, rapid data processing and visualization tools. This allows them to have the discussions that lead to decisions. Use user-friendly tools to build and refine geological models. You can quickly generate models from large data sets without the need for wireframing. Visualize your geological data in 3D. Gain visual insight to help you interpret it. When you add new data to a modeling, the rules and parameters that you have already established are automatically applied. You can make a change to one model, and all dependent models will be updated immediately. This ensures that models are always up-to-date. Leapfrog Geo's features make it easy to analyze data. These include exploratory data analysis and distance function. Rapidly test new ideas and refine your model. Duplicate models, and use streamlined workflows to iterate interpretations as soon as new insights become available.

The Petrel platform can be used on-premise or in the DELFI cognitive E&P Environment. This allows geoscientists to analyze subsurface data, from exploration to production, and create a shared vision for the reservoir. This shared earth approach allows companies to standardize their E&P workflows and make better decisions by having a clear understanding both of the risks and opportunities. Integration at the data level allows for multi-discipline integration. This integration allows for the collection and preservation of knowledge from exploration to production - from the petroleum systems modeler to reservoir engineers and beyond - all contributing to a shared understanding of the subsurface. The Petrel platform facilitates multidisciplinary workflows, whether you are drilling in a shale field or drilling your first deepwater exploration well.

MFrac Suite software allows you to create and execute well stimulation designs in both traditional and unconventional plays. This will maximize production and prolong the life of your well. You can improve your planning process and integrate real-time data, minifracs and hydraulic fracturing. This will help you to make better decisions and arrive at meaningful reserves estimates. Our hydraulic fracturing analysis and design software allows you to pinpoint the most productive zones, determine effective fracture treatment options, and monitor reservoir stimulation in real time. Since the beginning of frac modeling, our software has been a support tool for engineers. We are now delivering a step-change of efficiency and capability to people responsible for unconventional well planning and stimulation modeling.

Advanced velocity determination and 3D/2D model building allow for accurate, high-quality and interpretable seismic images in depth and time. An integrated suite of interactive and batch velocity analysis tools allows you to easily solve all kinds of seismic imaging problems. The workflow is simplified by integration with interpretation and modeling tools. Data loss is prevented and geologic constraints are respected. No matter how complex the structural geology, it is easy to create 3D and 2-D models. Highly parallelized to run efficiently on large 3D datasets as well as multi-line 2D datasets. Hydrocarbon exploration and production requires accurate seismic images and depth models. Aspen GeoDepth velocity calculation and modeling system provides a solution to improve seismic imaging in depth or time. It integrates interpretation, velocity analysis, model construction, time-to-depth conversion, and more.

OreSense®, Platforms is Plotlogic’s collection of algorithms and API's that allow you to interface with your geological models as well as end users. OreSense®, Platforms allow mine planners, supervisors and geologists to choose how data should be integrated into their workflows. OreSense®, which captures new information from all levels of the value chain, can be used to update the relevant parts or flow of the block model. Our APIs can also be integrated with your existing scheduling tools to give you greater transparency on process variations as they happen. Platforms enable you to monitor the mining process more effectively by generating actionable reports. Data collected and analysed in real-time for your decision support system (DSS).

Every project is difficult, but the geotechnical analysis does not have to be. PLAXIS 2D offers fast computations. Advanced finite element and limit equilibrium analysis of rock and soil deformation and stability. Also, soil structure interaction, groundwater and heat flow. PLAXIS 2D, a powerful and easy-to-use finite-element software for 2D analysis and stability in geotechnical and rock mechanics, is available. PLAXIS is used by the top engineering firms and institutions in civil and geotechnical engineering. PLAXIS 2D can be used for many applications, including excavations, foundations, embankments, and foundations, as well as tunneling, mining and oil and gas extraction. PLAXIS 2D provides all the necessary tools to perform safety analysis and deformation of soil and rock. It does not need to take into account creep, steady-state groundwater, thermal flow, consolidation analysis or any other time-dependent effects.

This software package includes crosshole survey design and model building and modeling, data transformation, CDP transformations, tomography, wave equation migration and post-processing. It provides all the capabilities you need to complete a crosshole seismic project. The model includes P- and A-wave velocities and densities as well as anisotropic parameters. Create an arbitrary velocity model with layers, objects, faults, and other elements. Full wavefield simulation using an anisotropic finite difference method.

FrameWorks®, Plus is a powerful tool for structural modeling and drawing that supports your entire workflow: drawing, modeling, analysis, and reporting. Integrating structural tasks with plant creation can add value to your modeling process. FrameWorks Plus integrates with third party analytical and steel detailing software as well as other Hexagon plant designing software. This allows you to keep your data current and accurate. FrameWorks Plus fully supports PDS. Through an interface to PDS you can create plant structural models and share the latest project data with others in your office and around the globe. FrameWorks Plus is integrated with the engineering and construction workflow. FrameWorks Plus is more than a CAD program. It also provides intelligent graphics that allow for easy modeling, analysis, and reporting.

Simufact welding is a modular product line that provides extensive functionality for modeling the elastic-plastic behavior and structural weld simulation. The software can be used to simulate different welding processes. Simufact Welding allows you to simulate a wide variety of thermal joining processes using structural welding simulation. This includes brazing, arc and beam welding processes. Simufact Welding also allows you to model heat treatment, variations of cooling, unclamping setups, and mechanical loading of welded structures.

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

Better bridges from the beginning to the end. OpenBridge Designer offers advanced interoperability. It allows access to Bentley's civil data as well as seamless connections to Bentley's bridge design, analysis, and design applications. OpenBridge Modeler can be used by project team members to take the conceptual model into the design stage. They can then use the OpenBridge Designer to perform analysis and design, including evaluation of construction work stages, using Bentley's LEAP and OpenRoads Designer, RM Bridge, ProStructures and ProjectWise applications. You can combine all these capabilities into one application to improve performance, create intelligent models using intuitive capabilities for 3D parametric Bridge modeling, and improve project deliverables through intelligent data management and automated drawing production. This will revolutionize the bridge delivery process. OpenBridge Modeler is a 3D parametric modeling program for bridges.

S-FRAME allows users to model, analyze, and design any structure, regardless of its geometry, material type, loading conditions or nonlinear effects. S-FRAME's automated frame generators quickly create models and import them with BIM or DXF import links. Users can also maximize productivity with integrated concrete/steel design tools that allow for design, optimization, code compliance and report generation. S-FRAME allows users to quickly create structures using modeling automation. They can generate regular framework structures and custom trusses. Users can also use clone tools for replicating a portion or all of the model. Importing existing BIM or DXF models can also help users save time. S-FRAME's advanced meshing tools create a finite element mesh. This allows users to generate detailed analysis results for their specific areas. These areas can be explored by users easily converting members into multi-shell models.

MineScape was specifically designed to meet the stringent requirements of the mining industry. It is used in more than 200 complex mining operations, including nickel phosphate mining (Russia) and coal mining (Indonesia). It provides integrated solutions for underground and open-cut mining operations for coal and other metalliferous resources. MineScape is a world-class mine planning tool that offers extensive geological modeling and mine design functionality. GDB stores downhole survey data, lithology, quality data, and produces custom, summary, and user-definable reports. It allows geologists to perform correlations, composition, washability calculations, and classic 2D geostatistical analyses.

Advance Design is a robust and easy-to-use FEM Structural Analysis tool for structural engineers working in a BIM environment. It can design any type of structure with any load, including concrete, timber, and steel members. It also includes major codes standards (Eurocodes/North American). Advance Design offers a unique BIM experience. It allows engineers and construction professionals to create intelligent model-based workflows. Advance Design is a BIM platform that ensures continuity of analytical and geometric data through model transfers throughout the design cycle. Analyses are stored in the Digital Model as part of the BIM process. They can be used to create a rebar design, or a steel connection process from Revit. These options offer new opportunities for disruption. It is powerful, easy to use, and fully compatible with Revit®. A strong team of experts supports you. Flexible licensing model

Only for component manufacturers. Built for power. MiTek®, Structure is a powerful tool for structural modeling, editing and estimating. The formula builder feature allows designers to create and store custom formulas, group them into sets, apply them to jobs or individual objects, and scheme them. Apply formulas to modeled objects to create estimates. You can create and customize plan options right from your job file. You can include all member types, including accessories and walls, in your options. Option customization allows you to use special junction considerations for site-specific creation. You can create a model of a unit and place it multiple time. You can place units once and then make changes to the original units.

In times of tight schedules or limited resources, integrated solutions are crucial. RIBTEC provides many synergies in calculation design, construction, and design. In the context of Building Information Modeling (BIM), you can benefit from a faster data flow that streamlines the entire process of structural design. RIB's software solutions are available for structural engineers. They include building, ground, and finite element calculations as well as tunnel and bridge construction as well as the drawing of formwork or reinforcement plans. Since 1961, RIB has been a pioneer in structural design and FEM. Over 5,000 engineering offices, inspection and construction engineers, as well as planning departments from the public and private sectors use the RIBTEC programs. RIBTEC covers all aspects of structural design with more than 100 programs.

MAXSURF integrates naval architecture capabilities to create initial hull designs and assess the stability of existing vessels faster. You can streamline hull optimization using simple-to-use tools such as hull design, stability analysis, strength analysis, resistance prediction, initial structural design, and structural strength analysis. With MAXSURF's complete set of naval architecture tools, you can visualize and optimize vessel designs. Fair hull shapes are required to meet stability requirements, minimize power consumption, and ensure passenger and crew comfort in all sea conditions. Through initial modeling and stress analysis of beams and plates, you can reduce structural weight and ensure compliance. MAXSURF allows you to redefine design excellence for any size vessel. All types of marine vessels can be designed, analyzed, and optimized. You can unleash your creativity by modeling complex vessels quickly and efficiently using dynamically trimmed 3D NURB surface models.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

VisualAnalysis is used by thousands of professionals to meet deadlines. Customers describe it as "a great value" with "so much ease of use". You need tools that are easy to use and affordable. 3D models of buildings, tanks, towers etc. Static and dynamic response analyses. Design code checks for wood, concrete, steel, cold-formed steel and aluminum. Includes complete analysis and design features, including automatic plate meshing and nonlinear elements. 3D static and Dynamic FEA for civil engineering, mechanical, aerospace, or any other structural analysis. Support for building code load combinations is optional.

SCIA Engineer is a multi-material, integrated structural analysis software and design tool that can be used to design all types of structures. It is a versatile tool that can be used to design office buildings, industrial plants and bridges, as well as other projects, in a single, easy-to-use environment. It offers powerful CAD-like modeling, advanced calculations, code-compliant multimaterial design, and customizable reports. You can automate common situations with built-in or custom-made parametric templates for different geometries, and powerful load generation software. SCIA Engineer offers the most complete implementation of Eurocodes, including U.S. codes, and other international standards. Through powerful bi-directional links to Allplan, Revit, Tekla Structures, Open BIM’s IFC and third-party plugs-ins, seamless exchange of models with other stakeholders.

VABS is a cross-sectional analysis tool that can be used for general purposes. It can quickly and easily compute beam properties and recover 3D fields from composite beams. It is the only tool that can decouple a 3D slender, with complex microstructure, into an engineering beam model. AnalySwift is a product of the aerospace industry. It has been used to create composite beams (helicopter blades, propellers and high aspect ratio wings), plates/shells and 3D structures. VABS has been used for many years in the wind turbine industry. It produces rapid and accurate results when modeling blades. SwiftComp also offers plates/shells and 3D structures made from composites. The automotive industry is increasingly using composites. This opens up more opportunities to use SwiftComp and VABS for modeling a wide range of structures including beams, plates, shells, and so on.

Our end-to-end solution allows you to produce fast, accurate, and fully-integrated models for your infrastructure design. The Infrastructure Design solution by Causeway is extensively used by civil and structural engineers. It includes modules for vehicle path analysis, volumetric, alignment, drainage design, and vehicle path analysis. Additionally, it has functionality to create road markings and traffic signs. The solution offers all the benefits of Building Information Modelling (BIM), including intelligent 3D modeling capabilities and powerful integration functionality. Causeway PDS provides powerful 3D design tools that allow the engineer to create the best possible designs. The solution includes auto-design and automatic-updating functions. This is specifically designed to save engineers time and reduce risk.

Our success is based on our ability to understand the needs of our customers and solve their problems. Communication is straightforward and can be escalated to the CEO level if necessary. This allows us to achieve our customers' goals for project success as well as ensuring that projects are completed on time. For the benefit of our customers and our employees, we care about the safety of structural projects that are carried out with our technologies. We are trusted partners for the long-term and the best future. We provide technologies that are reliable and innovative. We understand that quality products are made by quality companies for quality clients. All customers are welcome, from new engineers to established engineering companies and government departments.

You can simply draw a beam of a frame structure in 1*2*Build's user-friendly environment. The model is then completed interactively and graphically with boundary conditions, permanent loads, and variable loads. 1*2*Build does all of the work for you and always delivers the best result: the beam with a smaller height, the steel profile with a lower weight or the girder that has the highest deflection limits. This allows you to design quickly and economically. 1*2*Build provides all functionality necessary for optimal structural design. It also allows you to create a concise, easily readable analysis report. 1*2*Build also provides a reinforcement sketch and a list of material quantities, including concrete and timber totals, reinforcement volume, and reinforcement volume.

Our user interface was designed to be as simple as possible. RISA-3D is able to create geometry graphically in multiple views with advanced modeling tools, or directly using spreadsheets to enter data. RISA-3D's analysis tools and design features make it easy to quickly design structures in a variety of materials. You can design buildings, bridges and tanks, as well as culverts. You and your colleagues can create reports that include both numerical and graphical results. This will give you and your colleagues complete confidence in your design. RISA-3D's latest interface was designed with structural engineers in mind. It is easy to navigate through a model from conception through final design optimization using the familiar tab-by-tab ribbon layout. Users can also customize the interface to ensure that their most frequently used tools are always available.

The modular solution for timber frame construction and floor construction is Framing. It meets the needs of the offsite construction market. The Framing software, which is widely used by timber frame manufacturers and structural engineers, is used to detail timber frame buildings in three-dimensional, produce comprehensive material schedules and create manufacturing drawings. It also has direct links to automated machinery and saws. Framing can be used to detail a variety of different types of timber frame building. While working primarily in a 2D environment a 3D version is created based upon the user's input. This allows for easy checking of levels within the application.

Combine all data sources to get a complete picture. This eliminates manual processing and allows you to uncover new insights and risks. Combine 1D, 2D and 3D geometries and multiple analyses from different products to increase your problem-solving capabilities. To better understand the complexity of your problem, you can clone that analysis and modify boundary conditions or material properties. You can run multiple analyses simultaneously and monitor the results. You can run multiple processes concurrently to generate construction sequences and establish initial conditions. Perform sensitivity analyses, model complex time sequences or divide a complex problem in smaller packages. You can dive deep into your project and create a single file that defines it. Then, you can continue to review the results and reassess as needed.

AutoPIPE is a powerful and comprehensive software tool that specializes in pipe stress analysis. With an intuitive modeling environment, advanced analysis capabilities, and a user-friendly interface, you can increase productivity and quality control. Interoperability with top plant design software ensures efficient workflows between structural engineers, pipe stress engineers, and CAD engineers. AutoPIPE features include advanced buried pipeline analysis, operational clash detection, wave loading and fluid transients. It also integrates with third-party applications like OpenPlant and AutoPLANT, PlantSpace and SmartPlant. AutoPIPE automatically determines optimal support locations for your design requirements. This is done without compromising safety or quality.

ProStructures is a comprehensive tool for concrete and steel design that can help you increase your productivity and profitability. ProStructures allows you to create and update 3D models, including reinforced concrete and structural steel. ProSteel allows you to design and detail steel structures in a variety industries. Easily create models and documentation for steel structure models. Deliver a 3D model of steel structures that is accurate and complete engineering, fabrication and erection drawings. Automatic updates are available whenever the 3D model changes. From the 3D model, create drawings for every steel shape, connection, or plate work. In-drawings, reports from external sources, and bills of materials can be generated and updated. 3D models, design drawings, fabrication details, schedules, and schedules can be created that automatically update when the 3D model is changed.

Maptek Vulcan GeologyCore streamlines the geology workflow, from data validation to model creation. Access cutting-edge modelling techniques via cloud-based machine-learning algorithms. Vulcan GeologyCore is a smart workflow that automates daily geology tasks. This allows geologists to spend more time on high-value work. The tasks are organized intuitively to import and validate drillhole data, define geological domains, then generate and publish geological models. Repeatable steps allow geologists to easily experiment with domain changes and see immediate effects on the model. Vulcan GeologyCore can be used for a variety of projects. Users can choose between cloud-based machine learning or traditional modelling methods like vein and implicit modeling. The intuitive ribbon automates the entire geology workflow, from importing and validating drillhole information to defining geological domains.

With STAAD, you can design, analyze and document structural projects anywhere in the world. It provides a flexible solution that covers all aspects of structural engineering, starting from the foundation. STAAD is a comprehensive structural finite elements analysis and design program that allows users to analyze any structure that is exposed to dynamic, wind, earthquakes, thermal, and other moving loads. STAAD is available in a variety of versions so you can choose the one that suits you best. STAAD is a popular application for structural analysis. It is well-known for its flexibility, interoperability, time-saving abilities, and analysis. STAAD is a 3D structural analysis tool that allows structural engineers to design steel and concrete structures. An analysis model can be created from a physical model created with the structural design software. STAAD incorporates many design code standards.

Use streamlined workflows to change the way you view and work with data. Quickly generate cross sections and use tools to integrate your models with engineering plans. Rapid creation and updating geological models will increase the productivity of your subsurface 3D modelling. Your models and outputs, such as cross sections, are automatically updated when new data is added. This saves both time and money. 3D subsurface modeling offers unparalleled accuracy and efficiency when it comes to understanding ground conditions. You can identify and assess risks earlier in the project's lifecycle. Subsurface insights in 3D bring clarity to complex data and give you a better understanding. Visual 3D subsurface models are more effective in helping you understand ground conditions.