Alternatives to GHE Analysis

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Hydra Balance is an innovative hybrid system tailored for commercial applications, designed to efficiently harness unused energy and streamline consumption through intelligent algorithms. This system integrates seamlessly with current heating and cooling infrastructures, delivering instant savings and contributing to reduced environmental impact. The hybrid energy-saving solution is particularly beneficial for commercial establishments that rely on centralized air conditioning year-round. Featuring a self-sufficient water heat pump, it captures thermal energy expelled from existing air conditioning units to provide heated water for showers, pools, and kitchen use. Advantages include significant reductions in energy expenditures, cutting heating and cooling costs by 50-70%, while also promoting sustainability by lowering local and global pollution levels by up to 80%. Its installation process is straightforward, as it can be retrofitted to existing heating and cooling setups, ensuring a swift return on investment with immediate financial benefits from the first day of use. Moreover, it boasts the convenience of remote 24/7 access, allowing for continuous monitoring and management of energy consumption. This feature enhances operational efficiency and further supports the commitment to eco-friendly practices.

GeoT*SOL enables precise minute-by-minute simulation of heat pump systems, allowing for the assessment of annual performance indicators such as the coefficient of performance (COP) and the financial margins associated with their use. Additionally, these systems can be integrated with various heat generators, including gas condensing boilers and solar energy installations. Users can choose from several operational modes, including monovalent, monoenergetic, and bivalent configurations. The annual performance factor as per VDI 4650 serves as a crucial benchmark for evaluating the efficiency of different plants. This measurement is essential for many financial support programs and regulatory approvals. Furthermore, GeoT*SOL computes the system's profitability in line with the guidelines set forth by the Federal Association of the Solar Industry (BSW), comparing costs of the heat pump system against alternative systems; it also evaluates the capital value and production costs, including the heat price, along with the modified internal rate of return (MIRR) that accounts for profit as well as reinvestment opportunities. Ultimately, the tool provides a comprehensive analysis that aids users in making informed decisions regarding their heating systems.

T*SOL is a simulation tool designed to assess the performance of thermal solar systems. It caters to various applications including domestic water heating, heating augmentation, swimming pool heating, and process heating. With T*SOL, you can effectively plan and size your solar thermal installations, including storage solutions and collector configurations, even for east-west roof orientations, while analyzing their economic viability. At the outset of your design journey, you have access to a wide array of relevant systems tailored for heating water, supporting heating needs, managing swimming pools, and addressing process heat demands. The software offers dimensioning recommendations throughout the design phase and allows for parameter adjustments, enabling you to discover the most effective combinations of storage capacity and collector area. Furthermore, the simulation outputs, including energy values, temperatures, and volumes, can be visualized in various graphical formats. Users can select from options like bar charts and line graphs, with the flexibility to adjust the time frame from a single day to an entire year, facilitating a comprehensive analysis of the system's performance over different periods. This versatility makes T*SOL an invaluable resource for optimizing solar thermal system designs.

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

Experience the simulation of fluid dynamics, thermal transfer, and fluidic forces that are essential for achieving the desired outcomes of your projects. SOLIDWORKS® Flow Simulation is a user-friendly Computational Fluid Dynamics (CFD) tool integrated within SOLIDWORKS 3D CAD, allowing you to swiftly and effortlessly model the behavior of liquids and gases flowing through and around your designs to assess product efficacy and functionality. The SOLIDWORKS® suite is designed for ease of use, promoting a seamless collaboration that enhances your ability to create products in a more efficient and cost-effective manner. Through SOLIDWORKS Flow Simulation, you and your colleagues can replicate fluid movement, heat distribution, and the associated forces critical for your product's triumph. Organizations of varying sizes require cohesive solutions to foster innovation and advance their operations. By employing integrated CFD capabilities, you can effectively evaluate the impacts of fluid dynamics, thermal exchange, and associated forces on your projects, while also enabling the exploration of multiple "what if" scenarios to facilitate rapid design optimization. This approach not only enhances product quality but also accelerates the overall development process.

DWSIM is a versatile and free chemical process simulator that adheres to CAPE-OPEN standards, functioning seamlessly on multiple operating systems like Windows, Linux, macOS, Android, and iOS. Its user-friendly graphical interface allows for features that were once only available in paid software. The simulator excels in both steady-state and dynamic modeling by employing a parallel modular solver for enhanced efficiency. Additionally, DWSIM comes equipped with sophisticated property packages. Users can access an extensive array of unit operations, such as mixers, splitters, separators, pumps, compressors, expanders, heaters, coolers, valves, pipe segments, shortcut columns, heat exchangers, a variety of reactors, distillation and absorption columns, solids separators, and cake filters, alongside spreadsheets, Python scripts, and flowsheet unit operations. Furthermore, it includes an Excel Add-In for executing thermodynamic calculations directly within spreadsheets, as well as an automation API that facilitates the creation, modification, execution, and saving of flowsheets, making it an all-encompassing tool for chemical engineering. With its robust capabilities and user-centric design, DWSIM stands out as an invaluable resource for professionals in the field.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

HRS-AHED, a new software for the calculation shell and tube heat transferrs, features fluids and mixing assistance, sensible heat / condensate calculations, single and multi pass units with or without baffles, and many other features: fluid database and customizable geometries; project sharing; batch calculation; vibration analysis and reporting. We have searched scientific literature extensively to ensure that the most up-to-date methods of heat transfer engineering calculation are used in the software. AHED has been used successfully to design many heat exchangers, making it a software solution that is industrially proven.

Globema’s Mobile HeatGrid represents an innovative, mobile-centric solution that revolutionizes heating network operations by automating task generation for field technicians, enhancing planning efficiency, and allowing for real-time progress tracking. This system combines a dispatcher’s interface, a mobile app for technicians, and a GIS framework, fostering a cohesive environment for managing fieldwork effectively. By automatically creating tasks and gathering data on-site, it offers timely status updates as jobs progress, thereby converting conventional methods into a fluid digital workflow. Tailored specifically for district heating providers, Mobile HeatGrid utilizes GIS mapping, which allows dispatchers to allocate and oversee tasks based on accurate geospatial data, while technicians are equipped with concise, step-by-step guidance on their mobile devices. Furthermore, it facilitates complete digitization of heating network evaluations, field inspections, and maintenance operations, significantly cutting down on manual data entry and promoting real-time collaboration among teams. This comprehensive approach not only boosts operational efficiency but also enhances the overall quality of service provided to customers.

Spruce is a comprehensive software solution tailored for heat pump businesses, designed to enhance every phase of the installation journey, starting from the first inquiry to the final documentation and compliance requirements. By utilizing this platform, installers can efficiently save time, boost their conversion rates, and expand their business reach. The software features tools for managing inquiry forms and creating immediate, precise heat loss assessments and cost estimates that help filter out unqualified leads. It also facilitates the creation of professional proposals with automated reports and branding elements, in addition to offering a heat loss survey and design capability that enables swift production of system designs and visually appealing reports. Furthermore, Spruce streamlines the paperwork and compliance process by automatically filling in all necessary documents for installations, notifications, and handovers, while incorporating a new integrated quality management system that ensures MCS compliance without requiring manual intervention. The platform promotes collaboration among all parties in the supply chain, permitting subcontractors and suppliers to coordinate effectively on various projects, and it seamlessly integrates with other workflow management tools for enhanced operational efficiency. This cohesive approach ultimately helps businesses thrive in a competitive market.

PV Elite® serves as a comprehensive tool for the design, analysis, and assessment of vessels and heat exchangers. Its user-friendly interface allows for quick learning, making it an excellent choice for those who need prompt initiation and assurance in their safety code calculations. The software takes into account the entire vessel, ensuring compliance with all necessary wall thickness regulations and stress analysis criteria for various types of vessels, including vertical towers, horizontal units, and heat exchangers. Additionally, it provides capabilities for evaluating and re-rating existing vessels, incorporating Fitness for Service evaluations as well. By utilizing PV Elite®, users can confidently design equipment suited for even the most demanding applications, all while doing so efficiently, accurately, and profitably. The program simplifies the process of defining pressure boundary conditions for vessels and exchangers, even when significant data input is required for complex load sets. Furthermore, PV Elite enhances the data entry experience by organizing input into logical subsets, thereby making the workflow smoother and more manageable for users.

Frost 3D software enables users to create scientific models that accurately represent the thermal behavior of permafrost influenced by various structures such as pipelines, production wells, and hydraulic facilities, while also considering the thermal stabilization of the soil. This software suite is built upon a decade of expertise in programming, computational geometry, numerical methods, 3D visualization, and the optimization of computational algorithms through parallel processing. It allows for the construction of a 3D computational domain that accurately reflects surface topography and soil composition; facilitates the 3D modeling of pipelines, boreholes, and the foundations of structures; and supports the importation of various 3D object formats like Wavefront (OBJ), StereoLitho (STL), 3D Studio Max (3DS), and Frost 3D Objects (F3O). Additionally, it includes a comprehensive library of thermophysical properties related to soil, building components, climatic influences, and cooling unit specifications, along with the capability to define the thermal and hydrological characteristics of 3D objects and the heat transfer properties on their surfaces. The software thus represents a sophisticated tool for engineers and scientists working in fields related to permafrost and thermal dynamics.

Inventor® Nastran® is a finite element analysis (FEA) tool integrated within CAD software, enabling engineers and analysts to perform a diverse range of studies using various materials. This software provides comprehensive simulation capabilities that encompass both linear and nonlinear stress analysis, dynamic simulations, and heat transfer assessments. It is exclusively accessible through the Product Design & Manufacturing Collection, which includes a suite of powerful tools designed to enhance workflows within Inventor. In addition to advanced simulation features, this collection also offers 5-axis CAM, nesting tools, and access to software like AutoCAD and Fusion 360, ensuring a holistic approach to product design and manufacturing processes. By utilizing Inventor Nastran, professionals can streamline their analysis and improve their design outcomes significantly.

Create customized analytical graphs by utilizing a user-friendly drag-and-drop interface that allows you to select from various data categories, including displacement measurements, coordinates, vectors, and velocities, along with additional elements like site voltage. You can modify the reporting date range and reference values, as well as implement filters such as 24-hour averages to refine your data set effectively. Once your graphs are designed, you can easily incorporate them into your dashboard for streamlined reporting. Additionally, for heat mapping, choose any data type you wish to visualize, set your desired time frame, and represent movement with a heat map that can be tailored by adjusting the color weights and scales to meet your specific reporting needs. You can enhance your heat maps by overlaying project imagery for quick visual reference and seamlessly integrate various prisms or sensor types to cross-reference data from different systems, ensuring comprehensive analysis and insight. This capability not only improves data visualization but also aids in making informed decisions based on the combined data sources.

Induction heat treatment simulation offers detailed insights into the temperature variations from the outer surface to the core and identifies specific regions where phase changes take place. With SIMHEAT®, users can assess how factors like current frequency, coil design, and the positioning of concentrators influence the heat-affected zone. The material modeling aspect accounts for the electrical and magnetic characteristics that vary with temperature. Moreover, SIMHEAT® can operate independently or work in conjunction with Transvalor software, ensuring a flawless transfer of results between the two platforms. This high level of interoperability guarantees that users can rely on consistent and accurate outcomes. Furthermore, all the features and functionalities available in SIMHEAT® are also incorporated into our FORGE® software, which is tailored for simulating hot, semi-hot, and cold forming processes, thereby expanding its utility in various manufacturing applications.

Fangkuai Headquarters Base features a dedicated R&D center, a fully operational laboratory, and two manufacturing zones, covering a total production area of 120,000 square meters. Renowned as a top domestic entity in boiler automation, the company exports its products to numerous countries and regions worldwide. Their range of boilers is designed with innovation in mind; utilizing a condensing device, they efficiently capture and reuse the heat from flue gases, significantly enhancing boiler performance. To minimize heat loss, ultra-fine glass wool insulation is strategically placed between the smoke box and the tube sheet, effectively curtailing unnecessary heat dissipation. Furthermore, the flue gas undergoes heat exchange through a spiral finned tube system in both the condenser and economizer, resulting in improved heat transfer, a minimum 4% reduction in fuel consumption, and a remarkable thermal efficiency increase to 104%. This commitment to efficiency and innovation positions Fangkuai as a leader in the industry.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Codeware offers a comprehensive suite of engineering software focused on the design, analysis, inspection, fabrication, and documentation of pressure vessels, heat exchangers, storage tanks, and similar equipment, adhering to well-established industry standards like ASME, API, TEMA, and other relevant codes. At the heart of this suite lies COMPRESS, which provides complete ASME VIII-compliant design for pressure vessels and heat exchangers, managing intricate calculations such as minimum design metal temperature, nozzle intersections, static head, and fatigue screening, while also offering finite element analysis when necessary. Additionally, it can produce solid models and automatically generate detailed drawings, design reports, and cost estimates for users. For the maintenance, inspection, or re-rating of pre-existing equipment, the INSPECT module introduces Fitness-For-Service (FFS) features in accordance with API 579 and similar standards, evaluating flaws like corrosion, damage, or defects resembling cracks, and determining the remaining life of the equipment. This comprehensive approach not only streamlines the engineering process but also enhances reliability and safety in operation. Furthermore, Codeware's tools are designed to support engineers throughout the entire lifecycle of a project, ensuring adherence to quality and regulatory requirements at every stage.

Energy2D is an interactive multiphysics simulation program grounded in computational physics, designed to model the three primary modes of heat transfer: conduction, convection, and radiation, while also integrating particle dynamics. This software operates efficiently on a wide range of computers, simplifying the process by removing the need for switches between preprocessors, solvers, and postprocessors that are usually necessary for computational fluid dynamics simulations. Users can create "computational experiments" to explore scientific hypotheses or address engineering challenges without the need for intricate mathematical formulations. Additionally, development is ongoing to introduce various energy transformation types and to enhance support for different fluid types. While Energy2D excels in accurately modeling conduction, its representations of convection and radiation are not entirely precise, which means results involving these elements should be regarded as qualitative. Over 40 scientific papers have utilized Energy2D as a valuable research instrument, showcasing its adoption in the academic community. As the program evolves, its capabilities are expected to expand further, potentially offering more comprehensive insights into complex physical interactions.

Vampire (Virtual Additive Manufacturing System): This software simulates 3D printing in order to predict and analyze the results. It also performs heat transfer analysis and deformation analysis based on thermal expansion and prediction. It is important to identify and address various manufacturing problems in advance, as 3D additive manufacturing can be expensive and time-consuming. This can be done by using analysis techniques that are suitable for additive manufacturing. Vampire offers key tools to build a smart preprocessing system for this purpose.

PetraSim is a graphical interface for TOUGH2 simulators. It solves problems related to geothermal systems and carbon sequestration.

AVEVA PRO/II™ Simulation serves as a steady-state simulator that enhances plant efficiency by refining process design, conducting operational analyses, and executing engineering studies. By offering a comprehensive approach to optimization, AVEVA PRO/II Simulation focuses on enhancing plant performance through the improvement of process design and operational analysis while also conducting in-depth engineering studies. Capable of performing complex heat and material balance calculations for an extensive array of chemical processes, this simulation tool presents a diverse selection of thermodynamic models applicable across multiple industries. It allows users to devise new processes and assess alternative plant configurations to achieve the most economical operations. Now accessible via the cloud, AVEVA PRO/II Simulation provides on-demand availability, straightforward maintenance, and adaptable usage options. Additionally, users can benefit from a highly experienced support team with over 15 years in the field, ensuring assistance whenever needed. Overall, AVEVA PRO/II Simulation stands out as a robust solution for optimizing plant performance, streamlining design processes, and enhancing operational efficiency.

Experience the full spectrum of heat transfer processes, encompassing convection, radiation, storage, and dissipation, while addressing both steady-state and transient environmental conditions. TAITherm thermal analysis software combines simplicity with robust capabilities, effectively handling solar and thermal radiation, convection, and conduction in various dynamic environments. By alleviating the complexities associated with thermal simulations, TAITherm guarantees that your designs will perform at their best in practical situations. Engineers and teams worldwide rely on TAITherm, utilizing it for diverse applications that span cutting-edge developments in fields such as automotive, electronics, wearables, military technology, architecture, and beyond. Our clients are at the forefront of innovation, leveraging thermal simulations and analysis to enhance usability, safety, and efficiency in their respective domains, ultimately pushing the limits of technological advancement. With TAITherm, the future of thermal analysis is not only accessible but also transformative for industries striving for excellence.

Smartcool's ECO3 is a retrofit product designed to enhance energy efficiency, potentially reducing compressor energy consumption by as much as 40% in HVAC-R systems, including air conditioning, refrigeration, and heat pumps. This remarkable energy savings is achieved through the innovative use of intelligent cycle optimization technology. Notably, the ECO3 can deliver energy efficiency improvements even on state-of-the-art equipment equipped with intelligent controls or in scenarios where other energy-saving measures are already in place. It is compatible with any control system found in these cooling units, accommodating various load profiles, night set-back routines, demand-limiting, non-demand-related interruptions, and demand-response capabilities. The installation process is streamlined and can be completed within an hour, causing no disruptions to the system or the conditions of the space being controlled. To further enhance the performance of even the most intricate systems, Smartcool offers additional features through its ESM product. This versatility makes the ECO3 a valuable addition for anyone looking to optimize their energy usage in cooling applications.

For many years, SINDA/FLUINT has been recognized for its effective and robust capabilities in heat transfer and fluid analysis, with enhancements introduced annually. This versatile tool serves as an all-encompassing platform for simulating intricate thermal and fluid systems, applicable across a variety of sectors including electronics, automotive, petrochemicals, power generation, healthcare, and aerospace. By streamlining the design process, SINDA/FLUINT enables users to save both time and financial resources, facilitating a deeper comprehension of their complex systems. You have the power to determine what aspects are crucial and how to approach your design performance inquiries in the most efficient manner. Additionally, the software's extensibility makes it potentially the most adaptable thermal and fluid analysis tool available today. Users can select the features they desire, establish the necessary levels of precision and approximation, and specify the required outputs, ensuring a tailored experience that meets their unique needs. This flexibility allows engineers to optimize their designs effectively in the challenging landscape of modern technology.

Subjecting your designs to real-world scenarios can significantly enhance product quality while simultaneously minimizing the costs associated with prototyping and physical testing. The SOLIDWORKS® Simulation suite offers a user-friendly collection of structural analysis tools that employ Finite Element Analysis (FEA) to forecast how a product will behave in actual physical conditions by virtually evaluating CAD models. This comprehensive portfolio is equipped with capabilities for both linear and non-linear static and dynamic analyses. With SOLIDWORKS Simulation Professional, you can refine your designs by assessing mechanical resistance, durability, topology, natural frequencies, as well as examining heat transfer and potential buckling issues. Additionally, it facilitates sequential multi-physics simulations to enhance design accuracy. On the other hand, SOLIDWORKS Simulation Premium allows for an in-depth assessment of designs concerning nonlinear and dynamic responses, dynamic loading conditions, and composite materials. This advanced tier also features three specialized studies: Non-Linear Static, Non-Linear Dynamic, and Linear Dynamics, ensuring a thorough evaluation of your engineering projects. By leveraging these powerful tools, engineers can achieve greater design confidence and innovation.

The PV-DesignPro suite is a dedicated tool for designing and analyzing standalone photovoltaic systems, incorporating hourly simulations that leverage climate data from 239 locations across the U.S. Developed in collaboration with Sandia National Laboratories, this enhanced software builds on the original PV-DesignPro-S model. Version 6.0 is compatible with various Windows operating systems, including Windows 95, 98, NT, Win2000, and Vista, and allows users to simulate the operation of photovoltaic energy systems over the course of a year, adapting to selected climate conditions and system specifications. The Solar Design Studio CD-ROM features three distinct versions of PV-DesignPro: "PV-DesignPro-S" for systems with battery storage, "PV-DesignPro-G" for grid-connected systems without storage, and "PV-DesignPro-P" for water pumping applications. Each version is designed to provide precise and comprehensive insights into expected system power output, ensuring that users can effectively plan their photovoltaic installations. Moreover, the software serves as an essential resource for engineers and designers aiming to optimize the efficiency and performance of solar energy systems.

LoopCAD stands out as the leading software for efficiently generating high-quality circuit layout designs specifically for radiant heating systems. The latest version, LoopCAD 2021, introduces a suite of sophisticated design capabilities such as built-in calculations for heating and cooling loads, comprehensive hydronic assessments, snowmelt design features, 3D CAD visualizations, and support for various original equipment manufacturer (OEM) design techniques and materials. Additionally, the MJ8 Edition now incorporates ACCA®-Approved Manual J® (8th Edition) calculations tailored for residential heating and cooling requirements. Renowned for its user-friendliness and power, LoopCAD is arguably the most effective tool available for radiant heating design. Users can swiftly create floorplan layouts utilizing a library of predefined elements like rooms, doors, and windows. Adjusting room dimensions is as simple as dragging the walls or corners, and the software allows for seamless integration of rooms to form intricate floor plans. Furthermore, the ability to quickly modify room shapes enables the design of highly complex layouts, while the inclusion of freehand drawing tools allows for even greater creative flexibility in crafting unique shapes. Overall, LoopCAD combines efficiency with advanced functionality, making it an invaluable resource for designers.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

Eturnity software is designed to support installers and salesmen of climate friendly building technologies (photovoltaic/solar, heat pumps, charging stations etc.). We offer excellent support throughout the entire process of customer acquisition and consultation with our products. Eturnity facilitates customer acquisition by offering a first consultation that is highly effective and efficiency in the preparation of offers. Our customer can digitize their entire customer consultation, from initial planning and design of the building system to final compilation of quotes and sales. Eturnity is looking for sales partners! Eturnity has been serving Switzerland since 2015 with its software products. However, it is also inspiring more customers from all over the globe. We rely on highly motivated and competent sales partners to ensure our customers receive the best possible service. Do you see potential in your mar

Dyneo is a pioneering technology firm focused on enhancing energy efficiency and profitability for thermal network operators through the use of digitalization and AI. By providing valuable insights, our solutions can seamlessly integrate with both new and existing systems via standardized protocols, making deployment straightforward. We specialize in identifying anomalies that disrupt network performance and suggest actionable measures to resolve these issues. Our real-time management of heat generation and substations aims to optimize the overall operation of the network. Additionally, we offer integration with production control systems, comprehensive analysis, and operator support, utilizing machine learning models to further enhance energy efficiency. Our capabilities include automatic fault detection and real-time monitoring to facilitate the remote operation of thermal networks. Furthermore, we ensure effective interconnection between network optimization and heating controllers while managing demand, communication, and cost-effective data management for substations to streamline analysis and billing processes. Ultimately, Dyneo empowers operators to make informed decisions and improves the sustainability of thermal networks through innovative technology.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

Kraken serves as a comprehensive, intelligent utility operating system aimed at assisting contemporary utilities and infrastructure providers in transitioning from outdated technology to a unified, cloud-based platform. This innovative system automates and seamlessly integrates the entire energy supply chain, encompassing everything from managing customer relations and billing to optimizing assets and executing field services for flexible distributed resources such as electric vehicles, heat pumps, solar panels, and batteries. By leveraging cutting-edge data analytics, machine learning techniques, and utility-grade artificial intelligence, Kraken enhances customer service, minimizes operational expenses, accelerates the development of new products, and delivers real-time insights into operations, all while facilitating the migration from legacy systems through established methodologies. Its modular suite offers a variety of tools tailored for managing residential and commercial and industrial customers, as well as enabling no-code tariff and product configurations, improved field operations, and effective flexibility management aimed at optimizing energy resources, logistics, and workforce planning. Ultimately, Kraken is designed to empower utilities to become more efficient and responsive in a rapidly changing energy landscape, ensuring they can meet the evolving demands of their customers.

Cableizer is an electrical, mechanical and thermal cable design software package. Cableizer is a web-based application: it is inexpensive, widely available and customizable. It also has better interoperability and is easier to maintain and install than a desktop program. Property • Software-based cable design up to 500kV! • Calculations of cable mass, heat of burning, CO2, price etc. Calculation of cable pull and rated current • Environmental calculations including magnetic field and increase in ground temperatures • Web-based, without installation or dongle but with automatic updates Share links directly with customers to collaborate

Organize your waiting list by incorporating essential information such as contact details, desired breed, chosen sire/dam, gender preference, registration type (limited or full), any allergies, and additional notes. Design highly customizable pedigrees that reflect your unique style with personalized color schemes and logos, while also selecting which data to display, whether to include photos, and the number of generations to show. Highlight champions in red and mark any duplicates for easy identification. Keep track of vaccinations, deworming schedules, medical conditions, and veterinary visits for a comprehensive health record. Document heats, matings, pregnancy details, and litter information, with automatic calculations for upcoming heats and anticipated litter dates. You can create an unlimited number of pedigrees and the system will automatically compute Wright's Coefficient of Inbreeding (COI) as well as AVK for both five and ten generations. Furthermore, you can simulate trial matings using Wright's COI alongside a printed pedigree, and even predict potential puppy coat colors based on the genotypes of the dam and sire, ensuring a thorough understanding of your breeding program. This comprehensive management tool enhances your breeding operations and helps you make more informed decisions.

In industries where the integrity of welded structures is critical, TRANSWELD® provides a cutting-edge and comprehensive solution for predicting potential welding imperfections. This advanced simulation software employs multi-physical models to accurately reflect the actual behavior of metal in both liquid and mushy phases, enabling an in-depth analysis of material transformations. Furthermore, TRANSWELD® facilitates the examination of the microstructure in solid-state assemblies. With this tool, you can ensure that your welded components meet required standards without the need for physical prototypes. Our software is entirely predictive, allowing users to digitally observe welding processes under realistic conditions. For instance, it enables the visualization of the heat source movement during simulations of techniques such as laser welding or arc welding, enhancing understanding and efficiency in the welding process. Such capabilities not only streamline production but also significantly reduce the risk of defects in the final product.

Start by defining your objectives clearly. Next, identify the potential risks associated with those objectives. After that, assess and prioritize these risks based on their potential impact and likelihood. Evaluate them against your established risk tolerance levels to understand which ones require immediate attention. Subsequently, determine appropriate responses to each identified risk and implement those strategies effectively. Ensure that you communicate and consult with relevant stakeholders throughout this process. Continuously monitor the situation and seek opportunities for improvement over time. Once you have compiled the risks into a risk register, positioning them on a heat map becomes straightforward! Just select the risk code and drag it to the corresponding location on the heat map. The X and Y axis values will be recorded automatically for your convenience. Additionally, you can easily reposition risks within the risk heat map or matrix by simply dragging and dropping them to their new spots. The Risk Heat Map, also known as the Risk Matrix, features a streamlined design that can be utilized during board briefings or meetings of the enterprise risk management committee. This solution is built with remarkable flexibility, offering various display options to suit different needs. You can create and customize multiple heat maps, each incorporating distinct filtering criteria or visual attributes, to better align with your specific requirements. This level of customization allows for a more tailored approach to risk management that can adapt to evolving organizational needs.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

The ENIT Agent provides you with real-time energy data effortlessly. This innovative solution requires minimal installation effort. Blocklinks_enitagent equips you with a comprehensive tool for tracking consumption of electricity, heat, gas, steam, or water. It integrates a data logger, gateway, database, server, and analysis software into one device, offering a revolutionary approach to energy management. Compatible with a wide range of meters and systems, this device eliminates the necessity for costly expansions, replacements, or installations. Data collected by the ENIT Agent software is seamlessly transferred to an integrated energy management portal, which features extensive evaluation capabilities in remarkable detail. Thanks to its contemporary architecture, the software is adaptable to the evolving needs of your business. The hardware and software of the ENIT Agent leverage cutting-edge scientific advancements, helping numerous clients achieve remarkable success in their energy monitoring efforts. With such a versatile solution, users can stay ahead in managing their energy consumption efficiently.

SOLIDCast Casting Simulation software stands as the leading PC-based solidification modeling and casting design tool within the casting sector. This innovative software was created by thoroughly investigating and addressing the real-world challenges faced during the design and production of solid casts. Unlike many software developers who come from purely academic backgrounds, the team behind this simulation software boasts hands-on experience in foundries and the broader casting industry. Since 1985, they have leveraged their practical knowledge to enhance SOLIDCast and its associated products. The unique blend of expertise in software engineering and foundry operations has positioned SOLIDCast as the most pragmatic solution for professionals in the casting field. Additionally, SOLIDCast enables users to simulate the thermal variations that occur due to heat transfer during the solidification phase of the casting process. This capability not only streamlines workflow but also aids in achieving optimal results in cast design.

Simcad Pro allows you to visualize, analyze, and optimize process flow systems within an interactive simulation modeling environment. Optimize, plan, optimize, and reorganize processes and procedures, while optimizing layouts, automation, scheduling, and facility improvement. Simcad Pro integrates historical and live data to offer the best simulation tool on the marketplace. Multiple industries can use these applications, including manufacturing, automation and logistics, distribution warehouse, food & beverage, and services. Multi-Threaded – 64 bit Engine Simulator-on-the-fly - You can make real-time modifications to the model as the simulation is running. You can animated the model in 3D, 2D, and VR using Ray Tracing, light effects, and shadows. Singular model building environment. Smart, Spatially Aware Agents. Sub-Flows. Collision Avoidance. Real-Time Connectivity. Spaghetti Diagrams and Congestion Analysis, Heat Maps Efficiency, OEE. Extensive reporting and analysis tools. Scenario Analyzer.

CADSIM Plus is an innovative software designed for chemical process simulation, integrating a dynamic simulator based on first principles with a comprehensive Computer Assisted Drawing (CAD) interface all in one solution. It excels in conducting accurate heat and material balances across various chemical processes and is capable of creating intricate dynamic simulations that incorporate control logic and batch operations. The software is equipped with an extensive array of generic process modules and provides optional libraries tailored for diverse applications. CADSIM Plus accommodates a broad spectrum of drawing complexities, ranging from straightforward block diagrams to intricate engineering schematics, and facilitates the export of designs to AutoCAD and other conventional CAD software. With its 'electronic flowsheet' runtime simulation mode, users are provided with interactive and animated tools for simulation, allowing real-time adjustments to process conditions during operation. This versatile software finds applications in process design, troubleshooting, forecasting future process scenarios, and addressing challenges related to dynamic control, making it a valuable asset for engineers and researchers alike. Furthermore, its user-friendly interface ensures that even those new to process simulation can effectively harness its powerful capabilities.

AnyCasting Software has established itself as a premier casting simulation tool for more than two decades. At present, we collaborate with manufacturers in sectors such as automotive, maritime, heavy materials, and electronics, having successfully sold over 600 licenses globally while providing expert consulting for more than 470 projects across various regions. The software offers advanced stress analysis capabilities, allowing users to effectively simulate deformation alongside heat and stress factors, while also facilitating automatic mold design to help in achieving the best mold configurations. Among our satisfied domestic clients are notable names like Hyundai Motors, Hyundai Heavy Industries, Samsung Electronics, and LG Electronics, among others. Furthermore, the software allows for precise identification of gas defects that may arise from air entrapment during the filling and flowing of molten material. By analyzing the pressure differentials between air and the melt, our technology successfully pinpoints these gas defects, enhancing the overall quality and efficiency of the casting process. This level of detail and precision showcases the software's commitment to improving manufacturing outcomes.

MuSES achieves unparalleled accuracy in electro-optic and infrared renderings through a systematic process that starts with the identification of heat sources like engines, exhaust systems, bearings, and electronic components, followed by a comprehensive in-band diffuse radiosity solution. After establishing your sensor at a specified range, you can render multi-bounce radiance values that have been spectrally summed, utilizing DeltaT-RSS contrast metrics for detailed analysis. If you have a sensor response curve available, simply import it to uncover insights you may have overlooked. With MuSES, you can explore reality in unprecedented detail. The software’s capability extends to comprehensively address physics from heat sources to environmental influences, enabling you to effectively manage thermal signature contrasts and assess control kits essential for low observable design in any geographical context. You can rigorously evaluate heat shields, cooling methods, and camouflage surface treatments for in-band radiance while accounting for atmospheric attenuation along the sensor’s line-of-sight. By prioritizing engineering tasks with MuSES early in your project development cycle, you empower your team to make informed decisions that enhance overall design effectiveness. This foresight can significantly streamline the development process and improve project outcomes.