Alternatives to ETAP Software

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

ReliaSoft provides a powerful set of reliability software solutions that facilitate a comprehensive range of reliability engineering modeling techniques and analysis techniques. We are the leading provider of reliability solutions for product testing, design, maintenance strategies and optimization. Our products support a variety of reliability and maintainability techniques, including life data analysis, accelerated lifetime testing, system modeling and RAM analysis. We also support reliability growth, FRACAS analysis, FMEA analysis and RCM analysis. These tools help you improve the reliability of your products and processes, and optimize maintenance planning.

OrCAD® X is a unified PCB design software platform. It offers significant improvements to ease of use, performance and automation. Our product suite includes applications for schematic, PCB layout, simulation and data management. OrCAD X Capture, a schematic design solution for electrical circuit creation and documentation, is one of OrCAD's most popular products. PSpice®, our virtual SPICE simulation engine integrated into Capture, allows you to prototype and verify your designs using industry-leading native analog, mixed signal, and advanced analysis engines. OrCAD X Presto and OrCAD X PCB editor are two PCB layout tools that allow designers to easily collaborate between ECAD/MCAD teams and build better PCBs faster. OrCAD X Presto is our new, simplified interface for novice designers, electrical engineers and PCB designers focused on quick turn PCB designs.

Commusoft is a job management software that can be used on the road or in the office. Efficiently connecting remote and office teams, Commusoft is an impressive all-in-one solution for trades businesses. Commusoft, a cloud-based solution, allows businesses of all sizes to complete more jobs per day, provide exceptional customer service, and accelerate invoicing to get paid quicker. The platform combines a variety of impactful tools into one solution. It includes CRM, estimates and job management, supplier management, invoices, payments, vehicle-tracking, over 40 preconfigured reports, SLA monitoring, and much more. Commusoft’s training and onboarding team makes it easy to transition from paper based systems to powerful digital operations. Clients are set up for success from the very beginning, so they can reinvent their businesses straightaway. Commusoft helps clients optimize their daily operations; with unmatched digital workflows, they see increased productivity, employee and customer satisfaction, and bigger overall company revenue. With Commusoft doing the heavy lifting, clients can focus on controlling their growth, and providing unmatched customer journeys. See how Commusoft can transform your service business.

Ansys Motor-CAD serves as a specialized tool for the design of electric machines, facilitating rapid multiphysics simulations throughout the entire torque-speed operating range. It allows design engineers to assess various motor configurations and concepts to create designs that maximize performance, efficiency, and compactness. With its four integrated modules—EMag, Therm, Lab, and Mech—Motor-CAD enables quick and iterative multiphysics calculations, significantly reducing the time from initial concept to finalized design. This efficiency in calculations and streamlined data input processes provides users with the opportunity to investigate a broader array of motor topologies and thoroughly evaluate the effects of advanced loss mechanisms in the early phases of electromechanical design. The latest release boasts enhanced capabilities for design optimization, multiphysics analysis, and system modeling tailored specifically for electric motors, ensuring that engineers have the tools they need for cutting-edge development. Ultimately, Motor-CAD's fast multiphysics simulation capabilities across the full torque-speed range empower engineers to innovate and refine electric motor designs with unprecedented efficiency.

EPLAN specializes in providing software and services that streamline various engineering disciplines, including electrical engineering, automation, and mechatronics. Our solutions, regarded as some of the best globally, cater to machine, plant, and control cabinet construction, embodying our commitment to "Efficient engineering." We position ourselves as a valuable ally for businesses of all sizes, helping them enhance their engineering efficiency by utilizing their skills more effectively. With the introduction of EPLAN eBUILD, users can revolutionize their engineering practices through automation; our unique libraries, whether pre-constructed or custom-designed, allow for the rapid generation of circuit diagrams with minimal effort, all within the exclusive EPLAN ePULSE cloud environment. As firms look to navigate complex engineering tasks, EPLAN eBUILD ensures they reach their project goals promptly and securely, confirming that not every novel concept emerges as a true innovation, as demonstrated by the Dynasphere's intriguing yet limited impact.

Nylus offers an All-In-One Centralized Operations Management Suit at lower prices. We optimize field crews through automation of scheduling & dispatching and management of safety & Training, management invoicing, routing, project management, timesheet, and more. NYLUS can recommend the most efficient system for your company using our 6 industry-specific dashboards. Our mobile app and GPS devices allow you to stay connected to the main office. You can also receive job notifications and access our in-app messenger. Field crew members can communicate with you at all times. You can capture e-signatures in the field and send them live to the office. Clients will be assigned an account representative to help with onboarding, training, and all aspects of implementation.

Cable Pro Web, a cloud-based calculation tool for low voltage electrical design, is well-known and compliant with many international standards. This software is compatible with all types of electrical installations, including commercial and industrial. Cable Pro Web allows users the ability to calculate cable sizing, voltage drop, maximum demand, voltage increase for solar, discrimination, protective devices, power factor correction and cable pulling tensions. It also allows them to calculate electrical networks with generators, transformers and switchboards. Cable Pro Web assists electrical businesses in securing more work and larger projects. It allows users to accurately quote and is therefore more likely to succeed on their projects. Cable Pro Web is easy to use and saves time. It is also quick and simple to learn. There is also excellent technical support.

Electrotechnik has introduced Cabe High Voltage software to make it easy and accurate to calculate cable-rating. There are many insulation conditions that can be covered in Air and Groups in air, Direct Buried or in-Ducts as well as Bonding Arrangements and Thermal Backfill. The graphical cable editor allows you to model custom cables from data sheets. There are many pre-modelled tables. The cable bonding arrangements can be changed between solid and semi-solid with or without regular transition. The transient module can be used to determine the emergency rating and cyclic rating for single-core and multicore circuits. The CHV software includes modules that calculate short-circuit rating, and magnetic fields intensity. You can easily create comprehensive directive PDF reports. Our engineers are available to assist you at any stage.

Solid Edge is a collection of software tools that are affordable, easy-to-use, maintain, and easy to use. It advances all aspects of product development, including mechanical and electrical design, simulation, production, technical documentation, data management and cloud-based collaboration. Solid Edge is based on Siemens industry-leading technologies and offers the most comprehensive and innovative approach to product development for mainstream markets.

SafeGrid Earthing Software is ideal for designing earthing systems. The software can perform accurate, finite element based calculations. SafeGrid Earthing software has been proven to be affordable, reliable, and easy-to-use. The software calculates substation grid resistance, touch and voltages, and lightning protection. The software has been helping industries for the past ten years. It includes all modules necessary to design a safe earthing system in the safe grip. It includes: Fault current distribution. Soil modelling. Grid. Safety criteria Secure results You also get support from our earthing experts engineers along with the software. SafeGrid Earthing software saves time and money on your projects.

The HOMER software is developed on the reliable and leading HOMER platform, which is utilized by over 250,000 designers and developers across more than 190 nations. With years of experience in the field, we deliver the most dependable and precise solutions to optimize hybrid power systems for both technical performance and cost efficiency. Delve into which product aligns best with your project needs or gain insights into our methodology for techno-economic analysis. You can watch our informative video, download the comprehensive white paper, or consult with an expert to discover how UL advisory professionals can assist you. Should you require assistance with your modeling and analysis or seek training in HOMER software, our team is ready to support you. We provide an extensive array of support services designed to ensure your success. UL advisory services offer you the benefit of our extensive expertise in renewable energy, backed by our credentials as independent engineers. From conducting feasibility studies to guiding design and certification processes, we provide thorough project support to meet your needs effectively. Engaging with us means you’ll have a partner committed to achieving your project goals.

Currently, engineering teams frequently rely on specialized simulation tools from various vendors to assess different design characteristics, which can lead to inefficiencies and higher costs due to the use of multiple software solutions. To address these challenges, SIMULIA offers a comprehensive suite of cohesive analysis products that enable users with varying levels of simulation knowledge and expertise to collaborate effectively while sharing simulation data and approved methodologies without compromising information integrity. The Abaqus Unified FEA product suite provides robust and comprehensive solutions for both standard and advanced engineering challenges, catering to a wide range of industrial applications. In the automotive sector, engineering teams can analyze complete vehicle loads, dynamic vibrations, multibody systems, impact and crash scenarios, nonlinear static situations, thermal interactions, and acoustic-structural relationships, all while utilizing a unified model data structure and integrated solver technology. This seamless integration enhances collaboration and improves the overall efficiency of the engineering process, allowing teams to innovate more rapidly.

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

Advanced requirements can be met with a comprehensive fluid and electrical planning software environment. E3.series is a real concurrent electrical engineering environment that supports advanced requirements for electrical documentation and wire harness design. E3.series allows for efficient and accurate design and manufacturing processes for electrical and fluid planning, wire harness and cabinet layout, as well as cable planning and cable planning. Its object-oriented architecture allows for a consistent and integrated design approach that reduces design time, eliminates errors, and improves quality. Object orientation ensures consistency in all design phases. Powerful automated operations and electric checks. Comprehensive outputs for manufacturing or documentation. Native format library and design data administration. Circuit diagrams, connection list, layout plans, and reports are always up-to date and synchronized.

Fusion 360 seamlessly integrates design, engineering, electronics, and manufacturing into one cohesive software environment. It offers a comprehensive suite that combines CAD, CAM, CAE, and PCB capabilities within a single development platform. Additionally, users benefit from features like EAGLE Premium, HSMWorks, Team Participant, and various cloud-based services, including generative design and cloud simulation. With an extensive range of modeling tools, engineers can effectively design products while ensuring their form, fit, and function through multiple analysis techniques. Users can create and modify sketches using constraints, dimensions, and advanced sketching tools. It also allows for editing or fixing imported geometry from other file formats with ease. Design modifications can be made without concern for time-dependent features, enabling flexibility in the workflow. Furthermore, the software supports the creation of intricate parametric surfaces for tasks such as repairing or designing geometry, while history-based features like extrude, revolve, loft, and sweep dynamically adapt to any design alterations made. This versatility makes Fusion 360 an essential tool for modern engineering practices.

MASTA serves as a comprehensive collection of CAE tools designed for the creation, simulation, and analysis of driveline systems, spanning from initial concepts to final production. It allows for the precise and swift development of transmission systems, whether starting from scratch or utilizing existing designs. Users gain an in-depth understanding of how mechanical components will perform throughout their lifecycle, particularly under various customer duty cycles. This software enables the early identification of potential failure modes during the product development phase, facilitating quicker adjustments to design. Key performance metrics can be predicted efficiently during the design process, allowing for extensive evaluation of modifications to transmission configurations, component choices, materials, and manufacturing techniques within a simulated environment. Full system simulations are feasible for any transmission or driveline setup, and integrating manufacturing simulations during design helps to minimize both development time and costs. The unique and modern framework of MASTA, developed entirely in C#, enhances its stability and compatibility with current and future operating systems. Overall, MASTA stands out as a robust solution that addresses the evolving needs of driveline design and analysis.

Tecplot RS is a comprehensive visualization and analysis tool specifically designed for professionals in the oil and gas reservoir engineering field. It streamlines the handling and analysis of reservoir simulation data by offering detailed XY plots, 2D cross-sections, and 3D grid visualizations. By allowing users to import data from multiple simulation platforms, it helps in organizing outcomes, validating models, and sharing insights effectively among team members. The latest updates, including the 2023 R1 release, have introduced improvements that enhance the evaluation of history match quality through the ability to create selection sets based on deviation bands. Furthermore, the software has expanded its capabilities by incorporating the visualization of negative values in stamp plots, which is crucial for examining fluid behavior patterns within reservoirs. With an intuitive interface, Tecplot RS promotes a quick adaptation process for new users, alongside providing comprehensive technical support and complimentary online training resources. This approach not only fosters user confidence but also encourages collaborative efforts in analyzing complex reservoir data.

Vensim®, the software of choice of thousands of analysts and consultants worldwide, is used to build high-quality simulations in business, scientific and environmental systems. Vensim integrates a powerful set of tools to develop, test, interpret, and distribute models. These tools include cause and effect diagramming, graphical or textual model constructions, easy reproductions of model structure by using subscripts and arrays, Monte Carlo sensitivity analyses, optimization, data management, and application interfaces. Additional features allow for advanced model resolution and fidelity. Vensim uses patented techniques for error detection, prevention, and rapid understanding of complex results.

Simcenter Femap is a sophisticated simulation tool designed for the creation, modification, and analysis of finite element models pertaining to intricate products or systems. This software allows users to implement advanced workflows for modeling individual components, assemblies, or entire systems, enabling them to assess how these models react under realistic conditions. Moreover, Simcenter Femap offers robust data-driven capabilities and graphical visualizations for results interpretation, which, when paired with the top-tier Simcenter Nastran, provides a holistic CAE solution aimed at enhancing product performance. As manufacturers strive to develop lighter yet more robust products, there is a growing emphasis on the utilization of composite materials. Simcenter stands at the forefront of composite analysis, continually advancing its material models and element types to meet industry demands. Furthermore, Simcenter accelerates the simulation process for laminate composite materials by providing an integrated connection to composite design, streamlining workflows for engineers in the field. This integration ultimately fosters innovation and efficiency in product development, paving the way for more sustainable manufacturing practices.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

ProModel is a cutting-edge discrete-event simulation tool designed to facilitate the planning, design, and enhancement of both new and existing systems in manufacturing, logistics, and various operational areas. This technology enables users to create accurate representations of real-world processes, capturing their natural variability and interconnectedness, which is essential for effective predictive analysis of potential modifications. By focusing on key performance indicators, you can optimize your system's performance. The software allows for the creation of an animated, interactive model of your business environment derived from CAD files, process maps, or Process Simulator models, providing a clear visualization of processes and policies in motion. This visualization aids in brainstorming sessions, where you can explore potential adjustments and devise scenarios to test improvements aimed at meeting business goals. Additionally, you have the capability to run multiple scenarios concurrently and analyze their outcomes using the Output Viewer, which is built on advanced Microsoft® WPF technology, enhancing the decision-making process. This comprehensive approach to simulation not only aids in immediate problem-solving but also fosters long-term strategic planning and innovation.

Design Force is a revolutionary innovation in electrical design. It allows you to break down the boundaries of your electrical design process. The process of designing a product is becoming more complex. This often involves technologies that are difficult or impossible to use ECAD tools to address. Design Force allows design teams to access system-level design information as early as the planning and conceptual phases. This allows them to layout each product board while simultaneously considering the entire system view. Design Force uses the most current industry hardware and software. Users can design in a native 3D environment. This allows them to achieve optimal performance by using native 64-bit, multithreading, multicore processors. Design Force is compatible with multiple client-server implementations. You can also work from your corporate cloud.

Collimator is a simulation and modeling platform for hybrid dynamical system. Engineers can design and test complex, mission-critical systems in a reliable, secure, fast, and intuitive way with Collimator. Our customers are control system engineers from the electrical, mechanical, and control sectors. They use Collimator to improve productivity, performance, and collaborate more effectively. Our out-of-the-box features include an intuitive block diagram editor, Python blocks for developing custom algorithms, Jupyter notebooks for optimizing their systems, high performance computing in cloud, and role-based access controls.

Ansys Cloud Direct’s powerful, easy-to-access HPC cloud solution will change the way you think about simulation. Unlike other simulation cloud solutions, Ansys Cloud Direct is simple to set up and navigate, will not break your workflow and does not require cloud experts to operate. Ansys Cloud Direct is all about Workflow, Performance, Support.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

Adams aids engineers in analyzing the dynamics of moving components and the distribution of loads and forces across mechanical systems. Often, product manufacturers face challenges in grasping the actual performance of their systems until later stages of the design process. While mechanical, electrical, and other subsystems undergo validation in line with their specific requirements during the systems engineering phase, comprehensive testing and validation of the entire system occur too late, resulting in costly and risky rework and design modifications. As the leading and most utilized Multibody Dynamics (MBD) software globally, Adams enhances engineering productivity and lowers product development expenses by facilitating early validation of system-level designs. This allows engineers to assess and manage intricate interactions among various disciplines, such as motion, structures, actuation, and controls, ultimately leading to optimized product designs that prioritize performance, safety, and user comfort. By addressing potential issues earlier in the process, Adams empowers engineers to create more reliable and efficient products.

The sixth-generation DYNAFORM Die Simulation Software presents an advanced platform that boasts a user-friendly and visually appealing interface designed for ease of use. Focused on the stamping process, this software minimizes the need for extensive CAE expertise and simplifies geometry and element tasks. Among its notable enhancements, users will find a well-structured tree management system for operations, a dedicated simulation data manager, and customizable icon groupings for quick access to drop-down menu features. Additionally, it offers distinct applications that operate independently, integrated pre- and post-processing capabilities, a multi-window view for better analysis, and the convenience of accessing functions with right-click options. Supporting large-scale forming simulations, the software includes a geometry management tool, a process wizard for optimizing blank sizes, a comprehensive material library, new draw bead shapes, and an efficient coordinate system manager. The combination of these features enhances the overall simulation experience, making it a powerful tool for engineers and designers alike.

Tackle intricate engineering problems by improving the efficiency of simulations. Simcenter 3D stands out as one of the most thorough and seamlessly integrated CAE solutions available. It allows you to create and assess the performance of complex products through groundbreaking advancements in simulation efficiency. By bringing together various physics domains within a single modeling environment, you can quickly gain deeper insights into how your product performs. This integrated platform facilitates all aspects of CAE pre- and post-processing, allowing for a streamlined workflow. With unmatched tools for geometry manipulation, you can easily defeature and simplify CAD geometry from any origin. Additionally, its extensive meshing and modeling capabilities cater to diverse simulation needs, granting you the exceptional ability to connect your analysis model with design data seamlessly. This connection not only accelerates the often tedious modeling process but also ensures that your analysis models remain aligned with the most current design iterations, ultimately enhancing productivity and accuracy in your engineering projects. By adopting Simcenter 3D, you can significantly reduce development time while improving the quality of your simulations.

Simcad Pro allows you to visualize, analyze, and optimize process flow systems within an interactive simulation modeling environment. Optimize, plan, optimize, and reorganize processes and procedures, while optimizing layouts, automation, scheduling, and facility improvement. Simcad Pro integrates historical and live data to offer the best simulation tool on the marketplace. Multiple industries can use these applications, including manufacturing, automation and logistics, distribution warehouse, food & beverage, and services. Multi-Threaded – 64 bit Engine Simulator-on-the-fly - You can make real-time modifications to the model as the simulation is running. You can animated the model in 3D, 2D, and VR using Ray Tracing, light effects, and shadows. Singular model building environment. Smart, Spatially Aware Agents. Sub-Flows. Collision Avoidance. Real-Time Connectivity. Spaghetti Diagrams and Congestion Analysis, Heat Maps Efficiency, OEE. Extensive reporting and analysis tools. Scenario Analyzer.

Simufact Additive is an advanced and adaptable software tool designed for simulating metal-based additive manufacturing techniques. Learn how to effectively utilize Simufact Additive to enhance your metal 3D printing and rapid prototyping efforts. By employing this software, you can greatly minimize the need for numerous test prints. Our objective is to furnish you with a solution that enables the production of additive manufacturing components with consistent dimensional accuracy on the first attempt. The multi-scale approach of Simufact Additive integrates the most effective methods into a singular software solution, ranging from a rapid mechanical technique to an intricate thermal-mechanical coupled transient analysis that offers exceptional precision in simulation results. Users can select the most suitable simulation method according to their specific requirements. Simufact Additive stands out as a specialized software solution focused solely on the simulation of additive manufacturing processes, which is evident in its streamlined operating framework. This focused approach not only enhances usability but also improves overall efficiency in the design and production workflow.

ExtendSim offers a comprehensive suite of tools suitable for various simulation tasks. Regardless of your intended application—whether it's model creation, execution, or analysis—there's a tailored package available to meet your specific requirements. The product range includes options for model construction, experimentation, and analytical assessment, along with Model Developer Editions and specialized packages focused on simulation execution, model evaluation, or educational purposes. To determine the most appropriate package for your needs, you can explore the User Types section. Users can create, utilize, and dynamically run models, develop custom interfaces and components, as well as exchange and control data with other software applications. Each Model Developer Edition (MDE) of ExtendSim retains a unified core of functionalities, allowing users to design and assemble models and interfaces, adjust parameters, execute simulations and animations, conduct experiments, and perform analyses and optimizations—all while being able to save and export their results effectively. This flexibility ensures that users can fully leverage ExtendSim's capabilities to enhance their simulation experience.

Simio is a software solution focused on simulation, production scheduling, and planning, specifically tailored to leverage the object modeling approach. Its primary goal is to provide organizations, regardless of their size or sector, with tools for swift risk assessment and cost-saving opportunities. To cater to varying business requirements, Simio is offered in five distinct versions: Personal, Design, Team, Enterprise, and Portal. Additionally, there is an Academic Edition designed for the use of both students and educators. This diverse range of editions ensures that all users can find a version that aligns with their specific needs and objectives.

Accessing Earth observation data for your application has never been easier. EarthCache™ offers an incredibly powerful and user-friendly API that connects you to satellite data from around the globe. By utilizing a single point of access, you can focus on development rather than data sourcing, retrieving analysis-ready archives and future datasets with resolutions ranging from 50 cm to 30 m. Developers will appreciate the efficiency of EarthCache, which consolidates multiple sources into one cohesive platform. With EarthCache, you gain seamless access to premier Earth observation data alongside sophisticated processing algorithms tailored for application developers. Our service aggregates and standardizes data from top-tier industry partners, saving your team from the lengthy process of integrating various systems. Building your data pipeline has never been simpler; just grab your code and integrate it within minutes. Designed specifically for developers, you can easily programmatically search and request the Earth observation data you require through a straightforward one POST, one GET model. Additionally, you have the capability to schedule pipelines that monitor designated areas of interest, ensuring you remain updated with the latest information.

WeStatiX SHM integrates authentic simulation-driven Digital Twins with cutting-edge Artificial Intelligence into an innovative platform designed for infrastructure oversight. This technology can be utilized across various structures, including bridges, tunnels, slopes, and rock walls, offering precise insights into both the present and future conditions of the monitored entities. With WeStatiX, enhancements in structural safety are achievable, alongside the potential to streamline monitoring expenses and mitigate the ecological footprint of construction activities. Accessible directly through a web browser, WeStatiX|SHM enables users to develop tailored digital twins for the real-time surveillance of extant structures in the cloud. This versatile system caters to a wide array of infrastructures such as dams, buildings, and more, underscoring its adaptability. By leveraging a blend of advanced digital technologies, combined with the power of artificial intelligence algorithms, it serves as a formidable resource for the inspection and upkeep of any monitored structure. Additionally, the platform facilitates a proactive approach to maintenance, ensuring that infrastructure integrity is continually assessed and preserved.

Engineers and researchers can use WELSIM finite-element analysis software to create prototype virtual products and conduct simulation studies.

TrendMiner is an advanced industrial analytics platform that is fast, powerful, and intuitive. It was designed to monitor and troubleshoot industrial processes in real-time. It allows for robust data collection, analysis and visualization, allowing everyone in industrial operations to make smarter data-driven decision efficiently. TrendMiner is a Proemion Company founded in 2008. Our global headquarters are located in Belgium and we have offices in the U.S.A., Germany, Spain, and the Netherlands. TrendMiner has strategic alliances with major players like Amazon, Microsoft and SAP. It also offers standard integrations for a variety of historians, including Honeywell PHD and GE Proficy Historian.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

Luminary Cloud represents the cutting-edge of computer-aided engineering as the first SaaS platform designed to deliver rapid insights to engineers, enabling them to conduct simulations, analyses, and iterations that were previously unattainable. Experience the remarkable ability to perform simulations in mere minutes using some of the most powerful GPUs available in the cloud. Your raw simulation data can be securely stored, accessed, and analyzed, leading to valuable insights that enhance engineering design optimization. By expediting experiments, you can improve product design quality while minimizing defects. This platform significantly accelerates time to market by enhancing engineering efficiency and reducing costs associated with hardware, prototyping, and physical testing. Empower your team to achieve their most innovative designs through quicker insights and outcomes, all facilitated by the most user-friendly simulation platform. With the capability to run rapid simulations at any scale, collaborate globally through project sharing, and begin analyzing results without delay, your engineering process will be transformed for the better. The future of engineering design is here, making it easier than ever to bring innovative products to life.

MapleSim serves as a sophisticated modeling solution that spans from the use of digital twins for virtual commissioning to creating system-level models for intricate engineering design endeavors, enabling significant reductions in development time and costs while effectively addressing real-world performance challenges. By enhancing control code rather than relying on hardware modifications, you can eliminate vibrations and pinpoint the underlying causes of performance issues through in-depth simulation insights. This powerful tool allows for the validation of design performance prior to moving on to physical prototypes. Leveraging cutting-edge methods, MapleSim not only drastically shortens model development time but also enhances understanding of system behavior and facilitates rapid, high-fidelity simulations. As your simulation requirements evolve, you can easily scale and connect your models. With its adaptable modeling language, you can extend your designs further by integrating components across various domains within a virtual prototype, tackling even the most difficult machine performance challenges with confidence. Overall, MapleSim empowers engineers to innovate with efficiency and precision, ensuring that their designs meet the rigorous demands of modern engineering projects.

Inventor® Nastran® is a finite element analysis (FEA) tool integrated within CAD software, enabling engineers and analysts to perform a diverse range of studies using various materials. This software provides comprehensive simulation capabilities that encompass both linear and nonlinear stress analysis, dynamic simulations, and heat transfer assessments. It is exclusively accessible through the Product Design & Manufacturing Collection, which includes a suite of powerful tools designed to enhance workflows within Inventor. In addition to advanced simulation features, this collection also offers 5-axis CAM, nesting tools, and access to software like AutoCAD and Fusion 360, ensuring a holistic approach to product design and manufacturing processes. By utilizing Inventor Nastran, professionals can streamline their analysis and improve their design outcomes significantly.

Ansys Gateway powered with AWS is the solution to developers, designers, engineers, and others who want to manage their Ansys Simulation & CAD/CAE development in the cloud. You can access cloud computing resources anywhere, on any device, via your web browser. Cloud applications can be created, customized, and connected with minimal technical knowledge. You can simply install third-party applications alongside Ansys apps. AWS cloud can help you accelerate innovation by removing the hardware barrier on-premises for High Performance Computing (HPC). Ansys' expertise in the configuration and deployment of Virtual Desktop Interfaces (VDI), and High Performance Computing (HPC) is your advantage Your AWS subscription allows you to manage and control your cloud CAD/CAE consumption and costs.

Siemens NX software offers a robust and adaptable integrated platform that enhances the efficiency and speed of product delivery. This innovative solution brings forth advanced design, simulation, and manufacturing capabilities, allowing organizations to harness the potential of the digital twin concept. NX supports all phases of product development, covering everything from initial concept design to engineering and manufacturing, providing a cohesive toolset that integrates various disciplines, maintains data integrity, and ensures design intent, thereby optimizing the overall workflow. One particularly effective approach within NX is the generative design process, which empowers engineers to swiftly create new products while adhering to specific design parameters. This iterative methodology yields quick results, enabling engineers to refine designs through variations in constraints until they achieve optimal solutions that satisfy all project requirements. Ultimately, this flexibility in design processes enhances innovation and accelerates time-to-market for new products.

It is intended for architects of electrical and power equipment systems in buildings. It can also be used to document the professional documentation of low-voltage electrical systems. This module expands the capabilities and features of ArCADia's BIM program with advanced functions. It means that a portion of the building modeling options are available in ArCADia's BIM program

RockWorks is a software program that creates 2D and 3-D maps, logs, cross sections, geological models and volume reports. It also provides general geology diagrams for the petroleum, geotechnical and mining industries. RockWorks is the industry standard for environmental, geotechnical and petroleum mining data visualization. It includes popular tools like maps, logs and cross sections, fence diagrams and solid models, as well as logs and solid models. RockWorks offers numerous options for analyzing your surface and subsurface data, and accepts many different data types, such as stratigraphy, lithology, downhole geochemistry/geophysics / geotechnical measurements, color intervals, fractures, and aquifer data. RockWorks' graphic output can be displayed in the built-in 2D or 3D viewing/editing window. You can also export to CAD and Google Earth and other GIS programs. To create page layouts for posters and reports, use the ReportWorks module.

ProDesign offers comprehensive design options that ensure complete control from the initial design phase through to commissioning and final completion. As the foremost software in the UK for providing full electrical design and calculations in accordance with BS 7671, ProDesign stands out as a robust, engineer-friendly tool suitable for projects of any scale—from residential homes to large airports. The software is available in various versions tailored to accommodate businesses of all sizes and types of work. Should project requirements evolve, users can easily upgrade to a more advanced version without hassle. Additionally, it allows for the verification of existing sites to ensure compliance with industry standards and grants access to detailed manufacturer data, featuring over 16,000 protective devices and busbar options. Users can swiftly obtain crucial information about any network component within their projects, all visually represented in a manner that aligns with their workflow preferences. By utilizing calculated result summaries, ProDesign significantly reduces the time needed for troubleshooting issues in designs, enhancing overall efficiency and productivity. This versatility and user-friendliness make ProDesign an invaluable asset for engineers in the electrical design sector.

Enhance efficiency, increase profits, and accelerate growth with GlobalEdge, the leading enterprise resource planning (ERP) solution specifically designed for field service industries such as commercial food equipment maintenance, HVAC, and petroleum services. By utilizing a unified platform, you can improve customer management and service through features like service agreement tracking, scheduling, billing, purchasing, and accounting, all in one place. The system's adaptable and customizable views empower dispatchers and various departments to oversee the information related to jobs, different job types, or the schedule for the day, week, or month. From a single, centralized interface, users can effortlessly organize recurring services from one work order and instantly dispatch tasks to all divisions of the business, ensuring that technicians in the field receive real-time updates. With GlobalEdge, you not only streamline your operations but also elevate the level of service you provide to your clients.

Every day, decision making takes place at every level of every business. Simul8 allows you to make the best decisions every time and delivers serious impact quickly. Simul8 simulation software is so intuitive, quick, and effective that you'll use it every single day. Be based on truth and not hunches. Maximize flow by understanding and optimizing it. Find and inspire new ways of operating. Plan and forecast with confidence. Refute the status quo. Simul8 makes it all possible.

BQR’s fiXtress provides a powerful tool for electronic product reliability analysis. Derating analysis can identify components that are over-stressed or over-designed and may need to be changed. Stress-based MTBF predictions provide a realistic estimate for the mean time until product failure after derating analysis. FiXtress is an advanced Design for Reliability suite that can be added to any Electronic Design Automation tool. FiXtress modules are available as standalone modules or in combination with other modules to create a comprehensive DfR solution. Unique thermal analysis that estimates average temperature rise on the cold plate for accurate stress derating.

MATLAB® offers a desktop environment specifically optimized for iterative design and analysis, paired with a programming language that allows for straightforward expression of matrix and array mathematics. It features the Live Editor, which enables users to create scripts that merge code, output, and formatted text within an interactive notebook. The toolboxes provided by MATLAB are meticulously developed, thoroughly tested, and comprehensively documented. Additionally, MATLAB applications allow users to visualize how various algorithms interact with their data. You can refine your results through repeated iterations and then easily generate a MATLAB program to replicate or automate your processes. The platform also allows for scaling analyses across clusters, GPUs, and cloud environments with minimal modifications to your existing code. There is no need to overhaul your programming practices or master complex big data techniques. You can automatically convert MATLAB algorithms into C/C++, HDL, and CUDA code, enabling execution on embedded processors or FPGA/ASIC systems. Furthermore, when used in conjunction with Simulink, MATLAB enhances the support for Model-Based Design methodologies, making it a versatile tool for engineers and researchers alike. This adaptability makes MATLAB an essential resource for tackling a wide range of computational challenges.