Alternatives to CF-MESH+

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Orbital Stack, an AI and CFD web-based program, provides earlier qualitative guidance. It compares a wide range of land-use options and shapes, and highlights any red flags. It allows for climate-conscious, high performance developments that are not possible with traditional studies. Orbital Stack was developed by world-renowned experts in microclimate engineering and wind. It is a game-changer in the architecture and building design industry, providing our clients direct access for wind comfort and safety analysis as well as thermal comfort and shadowing analysis and cladding pressure simulations. This allows architects to quickly understand the climate effects of their proposed building designs and make better decisions, resulting in more resilient and high-performing projects.

SimSolid is the revolutionary simulation technology for engineers, designers, and analysts. It performs structural analyses on fully-featured CAD assemblies in minutes. SimSolid eliminates geometry preparation, meshing, and other errors that are time-consuming and difficult to perform in conventional structural simulations. Multiple design scenarios can be simulated quickly under real-life conditions. You can use any CAD model, even an early one. SimSolid tolerance for imprecise geometry means SimSolid simulation tools don't need to be simplified before analyzing designs. SimSolid supports all types of connections (bolt/nuts, bonded, rivets and sliding) and analysis for linear static, modal, and thermal properties. It also supports complex coupled, nonlinear, dynamic effects.

Utilizing the distinctive and inherently dynamic Lattice Boltzmann-based physics, the PowerFLOW CFD solution conducts simulations that effectively replicate real-world scenarios. With the PowerFLOW suite, engineers can assess product performance at the early stages of design, before any prototypes are constructed—this is when alterations can have the most substantial effects on both design and budget. The PowerFLOW system seamlessly imports intricate model geometries and conducts aerodynamic, aeroacoustic, and thermal management simulations with high accuracy and efficiency. By automating domain discretization and turbulence modeling along with wall treatment, it removes the need for manual volume meshing and boundary layer meshing. Users can confidently execute PowerFLOW simulations using a large number of compute cores on widely utilized High Performance Computing (HPC) platforms, enhancing productivity and reliability in the simulation process. This capability not only accelerates product development timelines but also ensures that potential issues are identified and addressed early in the design phase.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

Renowned for its exceptional durability, CFX stands out as the premier CFD software for turbomachinery applications. Its solvers and models are integrated into a sleek, user-friendly, and adaptable graphical interface that offers extensive options for customization and automation through session files, scripting, and an advanced expression language. The software's highly scalable high-performance computing capabilities significantly accelerate simulations for various equipment, including pumps, fans, compressors, and turbines. Recent advancements in manufacturing techniques have enabled the development of more efficient turbine cooling channel geometries, which, while more intricate, promise enhanced performance and efficiency. In pursuit of precise results, a group of engineers from Purdue University opted for Ansys CFX to conduct their simulations. They executed critical calculations with minimal delay, allowing them to delve deeper into comparative analyses and run additional simulations, which ultimately led to a more thorough optimization of their product. This efficiency not only improved their workflow but also contributed to innovative solutions in turbine design.

AKL FlowDesigner is an advanced computational fluid dynamics (CFD) software that facilitates wind analysis by allowing users to effortlessly import 3D models of structures or urban blocks created with modeling applications like Autodesk Revit, GRAPHISOFT ARCHICAD, Rhinoceros, and SketchUp. This software supports BIM capabilities in IFC format, making it a valuable tool for architects, designers, engineers, and consultants who can leverage it early in the design phase to comprehend and visualize airflow around their projects. By conducting early analyses, professionals can significantly decrease design time while also making a strong impression on their clients. The CFD simulations offered by AKL FlowDesigner provide substantial advantages in the architecture, engineering, and construction (AEC) sectors. Previously, simulating airflow was a daunting and time-intensive process that necessitated extensive technical expertise; however, with AKL FlowDesigner, users can easily create simulations and analyze airflow within minutes, eliminating the need for an engineering background or intricate calculations. This user-friendly approach opens up the world of CFD to a broader audience, empowering more individuals to enhance their design projects.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

ESS has gained significant traction in the automotive sector due to our specialized solutions tailored for this niche market. As our offerings thrived in a highly competitive landscape, ESS expanded into the “on-demand” sector. With the introduction of the alsim cloud, we are accomplishing unprecedented feats in the realm of simulation technology. Our pay-per-use simulation tools are accessible to all users, regardless of their CFD background, allowing students, engineers, and businesses to leverage our advanced techniques to enhance their projects. In addition to our offline products, we cater to diverse industries by providing solutions and detailed reports derived from our simulation outputs. We engage in close collaboration with our clients to understand their specific needs and challenges, ensuring they receive precise simulation results tailored to their requirements. Drawing from our extensive experience with industrial processes and our powerful solvers, we have successfully supported several leading OEMs around the globe. This dedication to customer satisfaction and innovation continues to drive our growth and influence in the industry.

Ansys Fluent stands out as the premier fluid simulation software, distinguished by its cutting-edge physics modeling features and unmatched precision. By utilizing Ansys Fluent, you can dedicate more time to innovation and enhancing product efficiency. This software is backed by extensive validation across diverse applications, ensuring you can rely on its simulation outcomes. With Ansys Fluent, creating sophisticated physics models and evaluating various fluid dynamics phenomena is seamless within a user-friendly and customizable interface. This robust simulation tool significantly expedites your design process, allowing for quicker iterations and improvements. Boasting top-tier physics models, Ansys Fluent can effectively and accurately tackle intricate, large-scale simulations. The software unveils new possibilities for computational fluid dynamics (CFD) analysis. Additionally, its rapid pre-processing capabilities and swift solving times empower you to be the quickest in bringing your products to market. Fluent's unmatched features foster boundless innovation while maintaining a steadfast commitment to precision and reliability. Ultimately, Ansys Fluent not only enhances your design capabilities but also positions you ahead of the competition in a fast-paced industry.

GASP is a versatile flow solver that handles both structured and unstructured multi-block configurations, effectively addressing the Reynolds Averaged Navier-Stokes (RANS) equations along with the heat conduction equations pertinent to solid structures. It utilizes a hierarchical-tree architecture for its organization, enabling seamless pre- and post-processing within a single interface. Capable of solving both steady and unsteady three-dimensional RANS equations and their various subsets, it employs a multi-block grid topology that accommodates unstructured meshes composed of tetrahedra, hexahedra, prisms, and pyramids. Additionally, it integrates with a portable extensible toolkit designed for scientific computation, which enhances its versatility. The system achieves improved computational efficiency by uncoupling turbulence and chemistry processes. GASP is compatible with a wide array of parallel computing systems, including clusters, and ensures that the integrated domain decomposition remains user-friendly and transparent. Its robust design makes it suitable for a wide range of fluid dynamics applications.

Calculate fluid flow quickly and accurately. The Pipe Flow Calculator will be a valuable tool for engineers, students and professionals who work with fluid dynamics. It solves fluid flow problems, both simple and complex, in under a second. Why Choose Pipe Flow Calculator? Easy to Use: Just enter values to get instant results. Trusted worldwide - used daily by thousands professionals. Reliable and Updated - Bug fixes in 1-2 days. Transparent Calculations: All formulas are provided. Key Features Change between imperial and metric units. Choose pipes, materials and fluids on predefined lists. Export results to Excel & Word. Save, print and continue where you left. Copy/paste the full calculation reports. Available Calculators Pressure Drop, Pump Performance, Pipe Diameter and Reynolds Number Orifice Plates, Venturi Tubes, Nozzles, Prandtl Probe Control Valve, LPG, Thermal Energy

6SigmaET is a sophisticated tool for thermal modeling in electronics that employs cutting-edge computational fluid dynamics (CFD) to produce precise simulations of electronic devices. Tailored for the electronics sector, our thermal simulation software brings unmatched intelligence, automation, and precision to assist you in fulfilling your requirements and addressing thermal design obstacles. Since its launch in 2009, 6SigmaET has rapidly emerged as the leading thermal simulation software within the electronics cooling industry. Its flexibility enables users to assess the thermal characteristics of a wide array of electronic components, from the tiniest integrated circuits to the largest, most robust servers. You can discover more about the benefits 6SigmaET offers your field by watching our informative videos or reviewing our comprehensive case studies. Additionally, 6SigmaET allows for the seamless import of complete CAD geometry and PCB designs, significantly cutting down the time needed for model creation and enhancing overall efficiency in thermal analysis. This capability streamlines the process, enabling engineers to focus more on optimization rather than on initial setup.

Simcenter STAR-CCM+ is an advanced multiphysics computational fluid dynamics (CFD) software that enables the simulation of products in conditions that mimic real-life scenarios. This software stands out by incorporating automated design exploration and optimization into the CFD toolkit accessible to engineers. With a unified platform that encompasses CAD, automated meshing, multiphysics CFD capabilities, and advanced postprocessing, it empowers engineers to thoroughly investigate the entire design landscape, facilitating quicker and more informed design choices. By leveraging the insights offered by Simcenter STAR-CCM+, the design process becomes more strategic, ultimately resulting in innovative products that surpass customer expectations. Enhancing a battery's performance across its complete operating spectrum is a complex endeavor that necessitates the concurrent optimization of various parameters. In this context, Simcenter delivers a comprehensive simulation environment tailored for the analysis and design of electrochemical systems, fostering a deeper understanding of their behavior. This holistic approach allows engineers to tackle intricate challenges with confidence and precision.

Experience the simulation of fluid dynamics, thermal transfer, and fluidic forces that are essential for achieving the desired outcomes of your projects. SOLIDWORKS® Flow Simulation is a user-friendly Computational Fluid Dynamics (CFD) tool integrated within SOLIDWORKS 3D CAD, allowing you to swiftly and effortlessly model the behavior of liquids and gases flowing through and around your designs to assess product efficacy and functionality. The SOLIDWORKS® suite is designed for ease of use, promoting a seamless collaboration that enhances your ability to create products in a more efficient and cost-effective manner. Through SOLIDWORKS Flow Simulation, you and your colleagues can replicate fluid movement, heat distribution, and the associated forces critical for your product's triumph. Organizations of varying sizes require cohesive solutions to foster innovation and advance their operations. By employing integrated CFD capabilities, you can effectively evaluate the impacts of fluid dynamics, thermal exchange, and associated forces on your projects, while also enabling the exploration of multiple "what if" scenarios to facilitate rapid design optimization. This approach not only enhances product quality but also accelerates the overall development process.

Part of the TotalSim family, bramble is an online platform for CFD simulations. It can be accessed by any web-enabled computer. It speeds up the pre- and post-simulation process, increasing productivity and creating consistency between simulations. The platform includes customised data management tools and analysis tools as well as CFD and because it uses OpenFOAM, there are no subscription or license charges. Bramble Offers 1. Productivity increases 2. Reliable results 3. Customized data management 4. Simulations that are cost-effective 5. A platform that is easy to use 6. Scalable simulations Bramble also rents and sells the hardware required to run CFD simulations.

Altair Activate is utilized to model and simulate a diverse array of products as interconnected systems, facilitating the discovery of improved designs at an accelerated pace. As products across various sectors grow more intricate, electrified, intelligent, and interconnected, the need for advanced simulation tools becomes paramount. By leveraging multi-disciplinary system-level simulation capabilities, designers can develop sophisticated mechatronic systems more holistically, fostering enhanced collaboration and streamlined workflows among product development teams. Altair Activate effectively eliminates barriers between various subsystems, including mechanical, electrical, control, and electronic components, as well as software and hardware-in-the-loop interactions, alongside data analytics. Utilizing 1D modeling and simulation for thermal-fluid system dynamics allows for nearly equivalent accuracy to traditional 3D CFD methods, while significantly reducing timeframes, thereby promoting extensive design exploration and performance optimization more efficiently. This innovative approach not only speeds up the design process but also empowers teams to create more integrated and efficient product solutions.

Ingrid Cloud is an online tool which automates the entire process for wind simulations. Our computational model requires virtually no human intervention. It is easy to use and accurate. CFD is easy and affordable with us. This unique technology is based upon research at KTH Royal Institute for Technology over the past 15 years.

Enhance engineering processes with the only comprehensive and user-friendly CFD platform designed for multidisciplinary design and optimization. Computational fluid dynamics (CFD) plays a crucial role in multiphysics system analysis, allowing for the simulation of fluid behavior and thermodynamic characteristics through advanced numerical models. Engineers leverage the Cadence Fidelity CFD platform for various design tasks, including propulsion, aerodynamics, hydrodynamics, and combustion, to enhance product efficiency while minimizing the need for costly and time-intensive physical testing. This robust Fidelity CFD platform offers a seamless end-to-end solution tailored for applications across aerospace, automotive, turbomachinery, and marine sectors. With its efficient workflows, massively parallel architecture, and cutting-edge solver technology, the platform delivers remarkable performance and accuracy, significantly boosting engineering productivity in addressing contemporary design challenges. Ultimately, Fidelity stands out by not only simplifying complex processes but also enabling engineers to innovate rapidly and effectively.

SpectreUQ™ enhances the advanced DAKOTA software created by Sandia National Laboratories by incorporating a user-friendly wizard that assists engineers throughout the uncertainty quantification (UQ) process. The intricate details of the UQ method are managed seamlessly in the background. It employs a database to systematically organize results from both experiments and simulations, along with offering interactive visualization and graphing capabilities. Available through an annual subscription without any limits on the number of users, it also comes in source code format. Unlike many other techniques, SpectreUQ™ operates in a non-intrusive manner, allowing it to run alongside existing simulations rather than integrating directly within them. Users can leverage their own high-performance computing resources to assess numerous flight conditions and develop the built-in surrogate models. It is designed to be intuitive and user-friendly, having been refined through extensive real-world applications in UQ studies. The process of incorporating experimental data and computational fluid dynamics (CFD) results is guided by the Oberkampf-Roy method, ensuring a robust approach. Additionally, the interactive plots generated facilitate easy exploration and sharing of results, enhancing collaboration and communication among engineers. This comprehensive capability makes SpectreUQ™ a valuable tool for any engineer looking to integrate UQ into their workflow.

Ansys Icepak serves as a computational fluid dynamics (CFD) solver specifically designed for managing thermal issues in electronic devices. It offers insights into airflow, temperature distributions, and heat transfer phenomena within integrated circuit packages, printed circuit boards (PCBs), electronic assemblies, and power electronics. By leveraging the top-tier Ansys Fluent CFD solver, Ansys Icepak delivers robust cooling solutions tailored for electronic components, allowing for thorough thermal and fluid flow evaluations. The software operates through the Ansys Electronics Desktop (AEDT) graphical user interface (GUI), facilitating comprehensive analyses of heat transfer involving conduction, convection, and radiation. Moreover, it boasts sophisticated features for modeling both laminar and turbulent flow conditions, as well as conducting species analysis that incorporates radiation and convection effects. Ansys’ extensive PCB design platform empowers users to perform simulations on PCBs, ICs, and packages, enabling a precise assessment of complete electronic systems, thereby enhancing design efficiency and performance optimization. Thus, Ansys Icepak stands out as an essential tool for engineers aiming to improve thermal management in their electronic designs.

Autodesk CFD is a sophisticated software for computational fluid dynamics that allows engineers and analysts to forecast the behavior of liquids and gases with high accuracy. This tool significantly reduces the reliance on physical prototypes while enhancing understanding of fluid flow performance in various designs. It equips engineers with an extensive suite of robust tools aimed at optimizing system designs, managing thermal issues particularly in electronics cooling, and integrating Building Information Modeling (BIM) to improve occupant comfort in HVAC systems within Architecture, Engineering, and Construction (AEC) and Mechanical, Electrical, and Plumbing (MEP) sectors. Furthermore, the Application Programming Interface (API) and scripting capabilities enhance Autodesk CFD's functionalities, enabling customization and automation of routine tasks through the Decision Center. Additionally, the Decision Center streamlines the process of comparing system designs, thereby accelerating decision-making in design processes. This comprehensive approach not only improves efficiency but also empowers engineers to make more informed decisions in their projects.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

OpenFOAM is a free and open-source computational fluid dynamics (CFD) software that has been developed by OpenCFD Ltd since its inception in 2004. It boasts a vast user community spanning various engineering and scientific fields, including users from both industry and academia. The software offers a comprehensive suite of features capable of addressing a wide array of challenges, such as intricate fluid dynamics involving chemical reactions, turbulence, heat transfer, as well as applications in acoustics, solid mechanics, and electromagnetics. To ensure continuous improvement, OpenFOAM is released biannually, incorporating enhancements funded by users and contributions from the wider community. The software undergoes thorough testing conducted by ESI-OpenCFD's application specialists, development collaborators, and select customers, all supported by ESI's global network and commitment to quality. The assurance of quality is maintained through a stringent testing regime, which entails hundreds of daily unit tests, a moderate set of tests carried out weekly, and an extensive industry-focused test suite. This meticulous approach ensures that OpenFOAM remains reliable and effective for its diverse user base. Moreover, the collaborative nature of its development fosters a vibrant community that continually drives innovation within the software.

Adaptive Research is excited to unveil the CAESIM 2024 simulation platform, which is now available for immediate use, featuring enhanced computational fluid dynamics modeling along with multi-physics functionalities. This latest software version introduces innovative tools and features designed to streamline the modeling process, enabling CFD engineers to achieve rapid simulation results with greater efficiency. Additionally, the platform aims to enhance user experience through improved interfaces and capabilities.

Ansys Sherlock stands out as the sole reliability physics-based tool for electronics design that delivers quick and precise life expectancy assessments for electronic components, boards, and systems during the initial design phases. By automating the design analysis process, Ansys Sherlock enables the rapid generation of life predictions, thus eliminating the "test-fail-fix-repeat" cycle that often hampers development. Designers can effectively model the interactions between silicon–metal layers, semiconductor packaging, printed circuit boards (PCBs), and assemblies, allowing for accurate predictions of potential failure risks stemming from thermal, mechanical, and manufacturing stresses, all prior to creating prototypes. Additionally, Sherlock's extensive libraries, which house over 500,000 components, facilitate the seamless transformation of electronic computer-aided design (ECAD) files into computational fluid dynamics (CFD) and finite element analysis (FEA) models. Each of these models is equipped with precise geometries and material properties, ensuring that stress information is accurately conveyed for reliable predictions. This capability not only enhances design efficiency but also significantly reduces the risk of costly errors in the later stages of product development.

Stallion 3D rapidly produces aerodynamic performance metrics, including lift, drag, and moments, for both new and existing CAD models. It offers exceptional RANS results without the need for manual grid creation, as the grid generation process within Stallion 3D is entirely automated. This feature effectively removes one of the most time-consuming challenges in computational fluid dynamics (CFD). Utilizing its unique CFD algorithm known as HIST, Stallion 3D accurately forecasts the aerodynamic characteristics of your designs. The software seamlessly imports CAD models and generates the necessary 3D aerodynamic data to validate your designs and support your success. It provides detailed reports on lift and drag forces, as well as yaw, roll, and pitch moments along specified coordinate directions. Additionally, it includes 2D line graphs that illustrate Cp, velocity, Mach number, density, and temperature at constant coordinate locations across the STL surface, allowing users to visualize parameters such as Cp (x) at various span locations along the wing. Overall, Stallion 3D streamlines the aerodynamic analysis process, making it more efficient for designers to achieve optimal performance.

Kombyne™ represents a cutting-edge Software as a Service (SaaS) tool designed for high-performance computing (HPC) workflows, originally tailored for clients in sectors such as defense, automotive, aerospace, and academic research. This platform empowers users to access a diverse array of workflow solutions specifically for HPC computational fluid dynamics (CFD) tasks, encompassing features like on-the-fly extract generation, rendering capabilities, and simulation steering options. Users can benefit from interactive monitoring and control functionalities, all while ensuring minimal disruption to simulations and eliminating reliance on VTK. By employing extract workflows, the necessity for handling large files is significantly reduced, allowing for real-time visualization. The system incorporates an in-transit workflow that utilizes a distinct process to swiftly receive data from the solver code, enabling visualization and analysis without hindering the operation of the running solver. This specialized process, referred to as an endpoint, facilitates the direct output of extracts, cutting planes, or point samples useful for data science, in addition to rendering images. Furthermore, the Endpoint serves as a conduit to widely-used visualization software, enhancing the overall usability and integration of the tool within various workflows. With its versatile features and ease of use, Kombyne™ is set to revolutionize the way HPC tasks are managed and executed across multiple industries.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

The engineering standard pipe flow software allows you to manage the entire fluid system's lifecycle. Pipe flow analysis software that is industry leading in accuracy, functionality, and usability. No spreadsheets or hidden costs. Must-read for those who manage, design or operate mission critical fluid processing environments. The cornerstone of the digital transformation journey towards Industry 4.0/Digital Twin Operations Management.

Enhance your decision-making process with Tecplot 360, the ultimate CFD post-processing tool. As more CFD simulations are conducted and grid sizes expand, the necessity for effective handling of large data sets and automated workflows becomes increasingly important. With Tecplot 360, you can reduce idle time and focus on discovering new insights. The software allows for seamless integration of XY, 2D, and 3D plots, giving you the flexibility to design visuals according to your specifications. Present your findings through stunning images and dynamic animations to captivate your audience. Simplify repetitive tasks using PyTecplot Python scripting to enhance productivity. Ensure that you never overlook important results while analyzing parametric data with the powerful Chorus tool. Access vast remote data securely through the SZL-Server client-server connection. Tecplot 360 supports a wide array of data formats including Tecplot, FLUENT, Plot3D, CGNS, OpenFOAM, FVCOM, VTU, and over 22 others related to CFD, FEA, and structural analysis. Additionally, you can efficiently report and compare multiple solutions in a multi-frame setup with various pages, allowing for comprehensive analysis and presentation. The software's versatility makes it an indispensable asset for any data-driven professional.

ParaView is a versatile, open-source application designed for data analysis and visualization across multiple platforms, allowing users to create visual representations for both qualitative and quantitative data analysis. It features interactive 3D exploration capabilities alongside programmatic data processing through its batch processing functionality. Engineered to manage extremely large datasets, ParaView leverages distributed memory computing resources, making it ideal for use on supercomputers that process terascale data as well as on laptops for smaller datasets. The application is built with a client-server architecture, enabling remote visualization of data while generating level-of-detail models to ensure smooth interactive performance even with extensive data. Its extensible framework is grounded in open standards, promoting customization and integration with existing tools and workflows. ParaView supports a wide array of well-known file formats and boasts over 200 filters and tools for effective data processing and visualization. This extensive feature set allows users to tailor their analysis experiences to meet specific needs and enhances collaboration in data-intensive projects.

Wind is a challenging element to understand fully. In city landscapes, its dynamics become increasingly intricate due to interactions with structures, leading to various phenomena such as accelerations (Venturi effect), swirling patterns, descending flows, and disruptions. The constructed environment thus generates a localized climate that frequently results in discomfort for individuals. To foster sustainable architecture and urban design, it is vital to analyze these aerodynamic effects and incorporate them early in the planning stages. This analysis is increasingly sought after by developers in numerous nations. Addressing wind dynamics is essential for the effective creation of outdoor public spaces that enhance user comfort. Furthermore, UrbaWind provides a tool for assessing pedestrian wind comfort by aligning with the comfort standards of different regions, ensuring a more livable urban environment. Ultimately, understanding wind behavior is crucial for improving overall urban quality and enhancing the experience of those who inhabit these spaces.

AIR represents a cutting-edge 3D graphics rendering solution, characterized by its innovative architecture and a comprehensive suite of features aimed at swiftly generating high-quality visuals. As a hybrid renderer, AIR blends the rapid rendering capabilities of scanline techniques—efficiently handling complex scenes, motion blur, and depth of field—with the adaptive precision of on-demand ray tracing, allowing for realistic reflections, soft shadows, global illumination, and caustics. This advanced renderer accommodates a wide variety of geometric shapes, such as polygon meshes, trimmed NURBs, subdivision surfaces, curves, particles, and implicit surfaces, all supported in their original form—eliminating the need for pre-meshing. Additionally, AIR facilitates true sub-pixel displacement and supports both high-dynamic range (HDR) input and output. A hallmark of AIR is its highly customizable shading and procedural modeling capabilities, enabling users to enhance the shading language by implementing new functions through any programming language of their choice. This adaptability empowers artists to push the boundaries of their creativity and achieve unprecedented levels of detail and realism in their projects.

The mesh significantly impacts the precision, convergence, and speed of a simulation. Ansys offers a suite of tools designed to create the most suitable mesh for delivering precise and efficient solutions. Their general-purpose, high-performance, automated, and intelligent meshing software is capable of generating the optimal mesh for accurate multiphysics solutions, ranging from straightforward automatic meshing to meticulously crafted mesh designs. The software incorporates smart defaults that simplify the meshing process, making it intuitive and effortless, while ensuring the necessary resolution to effectively capture solution gradients for reliable outcomes. Ansys’s meshing solutions cater to a wide variety of needs, from basic automated meshing techniques to advanced, custom meshing options. The available methods encompass a broad range of meshing techniques, including high-order and linear elements, as well as rapid tetrahedral and polyhedral meshes, alongside high-quality hexahedral and mosaic configurations. By leveraging Ansys's meshing capabilities, users can significantly minimize the time and resources required to achieve accurate simulation results, ultimately enhancing productivity and efficiency in their projects. Thus, the integration of Ansys meshing tools can transform the simulation process, leading to a more streamlined workflow and improved outcomes.

GMSWorks 4.4 represents the most current version of the CAD/CAM software that has been aiding engineers in the creation and production of intricate parts since 1982. This software package integrates the cutting-edge DESIGNBASE advanced modeling kernel, which boasts exceptional capabilities in free form surface and solid geometry modeling along with unrivaled design editing features. Significant upgrades in complex surface and solid modeling empower users to design, alter, and manufacture even the most intricate components of today's industry. GMSWorks provides an extensive combination of design editing options, allowing modifications through various methods such as direct geometry manipulation, sophisticated history management, or simply by adjusting a parametric dimension. The newly enhanced graphical interface offers impressive 3-D visualizations of designs, leveraging OpenGL technology to produce higher quality images, accelerate rendering times, and create a more dynamic workspace. Additionally, GMSWorks 4.4 is designed to streamline workflows, enabling engineers to maximize their productivity while tackling challenging design projects.

Tackle intricate engineering problems by improving the efficiency of simulations. Simcenter 3D stands out as one of the most thorough and seamlessly integrated CAE solutions available. It allows you to create and assess the performance of complex products through groundbreaking advancements in simulation efficiency. By bringing together various physics domains within a single modeling environment, you can quickly gain deeper insights into how your product performs. This integrated platform facilitates all aspects of CAE pre- and post-processing, allowing for a streamlined workflow. With unmatched tools for geometry manipulation, you can easily defeature and simplify CAD geometry from any origin. Additionally, its extensive meshing and modeling capabilities cater to diverse simulation needs, granting you the exceptional ability to connect your analysis model with design data seamlessly. This connection not only accelerates the often tedious modeling process but also ensures that your analysis models remain aligned with the most current design iterations, ultimately enhancing productivity and accuracy in your engineering projects. By adopting Simcenter 3D, you can significantly reduce development time while improving the quality of your simulations.

In the last twenty years, there have been significant advancements in software technologies, and high-performance computing (HPC) has progressed exponentially. However, our capacity to interpret simulation results has not experienced a similar evolution. Traditional methods of visualizing data, such as creating plots and animations, fail to keep pace when faced with extremely large multi-billion cell meshes or extensive simulations involving tens of thousands of timesteps. The process of evaluating solutions can be greatly expedited by generating features and quantitative metrics through techniques like eigen analysis or machine learning. Furthermore, the user-friendly FieldView desktop software is seamlessly integrated with the robust capabilities of the VisIt Prime backend, enhancing the overall analysis experience. This integration allows for a more efficient workflow, enabling researchers to focus on interpreting results rather than being bogged down by outdated visualization methods.

Enhance your 3D scanning capabilities with renowned software designed for expert-level scanning and data management, ensuring effortless 3D capture and highly accurate outcomes. Whether opting for the user-friendly Autopilot mode or the manual setting that grants complete control and adaptability, Artec Studio maintains an unwavering commitment to precision. Experience rapid measurements and seamless mesh-to-CAD evaluations directly within the Artec Studio platform. The software is fully compatible with Geomagic Control X, offering sophisticated inspection tools integrated into the Artec Studio environment. Speed up your engineering workflow by accurately fitting primitives to your 3D model and aligning it with precision. You can directly export STEP files to SOLIDWORKS, as well as intricate meshes to Design X or Geomagic for SOLIDWORKS. Leverage Artec Studio's array of CGI features, which include vibrant full-color 3D scan data, texturing through photogrammetry, and automatic glare reduction, to produce 3D models that perfectly replicate geometry and color fidelity. Furthermore, Artec Studio's advanced AI neural network enables remarkable, high-resolution scans in HD Mode, specifically tailored for users utilizing the Eva or Leo scanners, ensuring exceptional detail in every project. With these powerful tools at your disposal, your 3D scanning experience will be both efficient and transformative.

Rhino offers a comprehensive suite for creating, modifying, analyzing, documenting, rendering, animating, and converting NURBS curves, surfaces, solids, subdivision geometry (SubD), point clouds, and polygon meshes. The only limitations on complexity, degree, or size are dictated by your hardware capabilities. Its free-form 3D modeling tools rival those found in expensive software, enabling you to craft any shape you envision. With precision required for designing, prototyping, engineering, analyzing, and manufacturing a wide range of items—from aircraft to jewelry—Rhino ensures compatibility with all your design, drafting, CAM, engineering, analysis, rendering, animation, and illustration applications. It can read and repair intricate meshes and complex IGES files. The software is user-friendly, allowing you to concentrate on design and visualization without the software becoming a distraction. Remarkably efficient, it operates smoothly even on standard laptops without the need for specialized hardware. Furthermore, it serves as a foundational platform for numerous specialized 3D applications, broadening its utility in various fields. This versatility makes Rhino an indispensable tool for both professionals and enthusiasts alike.

Simcenter MAGNET serves as an advanced simulation tool for analyzing electromagnetic fields, enabling users to predict the performance of various components such as motors, generators, sensors, transformers, actuators, and solenoids that involve permanent magnets or coils. By facilitating low-frequency electromagnetic field simulations, Simcenter MAGNET offers comprehensive modeling capabilities that accurately represent the underlying physics of electromagnetic devices. Among its features are the modeling of manufacturing processes, temperature-sensitive material properties, and the intricate behavior of magnetization and de-magnetization, along with vector hysteresis models. The software’s built-in motion solver incorporates a six-degree-of-freedom functionality, which allows for the precise modeling and analysis of complex scenarios such as magnetic levitation and intricate motion dynamics. This advanced capability is bolstered by innovative smart re-meshing technology, ensuring that even the most challenging electromagnetic problems can be effectively addressed. Consequently, Simcenter MAGNET stands out as an essential tool for engineers and designers looking to optimize electromagnetic systems in a range of applications.

CAESES® serves as a versatile and robust parametric 3D modeling tool designed to streamline variable geometry with a minimized set of parameters. Its primary aim is to facilitate the creation of clean, durable parametric geometries that lend themselves well to automated meshing and thorough analysis. Users can seamlessly integrate, initiate, and oversee their simulation processes, making it an excellent graphical user interface for process automation, complete with 3D post-processing features. The software provides built-in techniques for automated design exploration and shape optimization, allowing for the enhancement of imported geometries through CAESES' advanced shape deformation and morphing capabilities. As a fully command-driven platform, CAESES® can be extensively scripted and tailored to meet specific project requirements, and it also supports batch mode operations. You can significantly expedite your shape optimization workflow by applying the outcomes of adjoint flow analyses directly to geometry parameters. In just a few days, you can have your adaptable CAESES model ready, tailored to your specifications and designed for ease of use, requiring no prior expertise in CAESES. The platform’s intuitive nature ensures that even newcomers can effectively harness its powerful capabilities.

MantiumFlow offers a command line mode that allows users to specify the case location and select their desired template, after which it generates the case and notifies the user of any problems or confirms success. This method is the quickest way to create multiple cases efficiently. Alternatively, the graphical user interface (GUI) enhances the experience by enabling users to navigate through options with ease and view a list of customizable settings. The GUI also has the benefit of displaying imported CAD files, ensuring that all components are correctly positioned. Designed primarily for incompressible external aerodynamics simulations, MantiumFlow produces a report that includes plots illustrating convergence, forces, and various flow field visualizations. Additionally, the software automatically generates the mesh, incorporating a specific level of automated refinement region selection. For geometries that require rotation, users can implement a rotating wall boundary condition on the relevant surfaces for accurate modeling. This combination of features makes MantiumFlow a powerful tool for engineers and researchers in the field.

Veras is an innovative visualization application powered by AI, seamlessly integrating with design tools like SketchUp, Revit, Rhinoceros, and Vectorworks, as well as web platforms, to enrich creativity and inspire users through their existing 3D model geometries. It features a geometry override slider that empowers users to find the perfect balance between creative expression and adherence to the original model's accuracy. With the render selection capability, users can make precise adjustments to targeted areas within images, ensuring real-time modifications that enhance their designs. Moreover, the render from the same seed function promotes a streamlined iterative design process by allowing users to maintain initial parameters while experimenting with new prompts. Accessible through a web app, Veras negates the need for complex installations or costly BIM software, enabling users to upload images or sketches directly in their browser for a full-fledged experience. This versatility makes it compatible with various versions of popular design software, ensuring a wide range of usability. As a result, Veras stands out as a comprehensive tool for designers looking to elevate their creative workflows.

Harness the advantages of natural solidification thermal analyses with a cost-effective and efficient software solution. CAPlite is equipped with a user-friendly graphical interface, making it accessible for users with limited experience in casting software. Beginning with a CAD design, CAPlite provides a thorough walkthrough for every phase, from meshing to post-processing. The method of natural solidifications offers rapid thermal simulations, delivering results in mere minutes. Whether for die casting or sand casting, CAPlite is capable of pinpointing issues across all casting types. The straightforward nature of natural solidifications enhances your entire casting workflow, enabling the design of risers, gating, and chill configurations to detect flaws, while also aiding in visualizing the intricate solidification process. In addition to the robust features of natural solidifications, CAPlite offers even more resources, equipping you with the necessary tools to optimize your castings—all at a remarkably low price point. This comprehensive software empowers you to elevate your casting practices, making it an invaluable tool for both novice and seasoned professionals alike.

Art of Illusion serves as a free, open-source studio for 3D modeling and rendering, boasting features that can compete with those of commercial software. Its notable functionalities encompass subdivision surface modeling, skeleton-based animation, and a visual programming language for crafting procedural textures and materials. The latest iteration, version 3.2.0, was launched on January 13, 2021, and is robust and dependable for high-end animation projects. Additionally, there is a comprehensive documentation section available that includes a user manual along with various tutorials addressing different program features. The user interface is thoughtfully designed to be clean and user-friendly, making it accessible for beginners while still catering to more experienced users. Furthermore, Art of Illusion’s subdivision surface modeling tools enable the creation of smooth surfaces derived from control meshes of any desired shape, and its advanced deformation tools provide a natural and intuitive sculpting experience for users. All these features come together to offer a powerful platform for both novice and professional animators alike.

The open-source platform designed for the processing and editing of 3D triangular meshes offers an array of tools for various tasks, such as editing, cleaning, healing, inspecting, rendering, texturing, and converting these meshes. It includes capabilities for handling raw data generated by 3D digitization devices and for preparing models suitable for 3D printing applications. In the latest update, support has been added for multiple file formats (.gltf, .glb, .nxs, .nxz, .e57), along with the introduction of a new plugin dedicated to precise mesh boolean operations. A critical phase in the workflow for handling 3D scanned data is the 3D data alignment process, often referred to as registration. MeshLab equips users with robust tools to align various meshes within a unified reference framework, effectively managing extensive sets of range maps. Additionally, it features a finely-tuned Iterative Closest Point (ICP) algorithm for one-to-one alignment, which is complemented by a global bundle adjustment step to optimize error distribution. Users can perform this alignment on both meshes and point clouds obtained from a variety of sources, including active scanners, whether they operate over short or long ranges. This versatility enhances the overall functionality and effectiveness of the tool in 3D data processing.

Moldflow® simulation software provides a comprehensive solution for addressing issues associated with plastic injection and compression molding processes. With its advanced features and user-friendly interface, it effectively tackles manufacturing challenges, including part warpage, enhancing cooling channel performance, and reducing cycle times. By fostering collaboration among product design teams, it helps to reduce delays and minimize rework expenses. Autodesk Drive and shared view functionalities facilitate seamless content collaboration, while in-product Fusion 360 enables rapid geometry modifications. Furthermore, automation tools streamline both setup and post-processing tasks. The software enhances solver flexibility to boost overall capacity and mitigates hardware limitations with Moldflow Insight. Users can mesh and solve Insight jobs using local, remote, and secure cloud server options, allowing for multiple simulations to be conducted simultaneously. It also provides secure storage, previewing, and sharing of design data, enabling efficient communication with stakeholders. Additionally, users can easily upload a .csv file to quickly add and assign numerous users in one go, significantly improving team management and collaboration efficiency. This adaptability allows teams to work more effectively and respond to changes in project needs swiftly.