Alternatives to AnyCasting

Take advantage of the power of thermal analysis for natural solidification in a software package that is affordable and capable. CAPlite has a simple, step-by-step graphical user interface that is ideal for anyone who does not have experience with casting software. CAPlite takes you from a CAD model through to the post-processing. Natural solidifications provide results in minutes. CAPlite can identify casting problems in all types of castings, from die casting to sandcasting. Natural solidifications are easy to use and can be used to enhance your entire casting process at any stage. They can help identify defects or visualize the otherwise abstract solidification process. CAPlite gives you the power of natural sinterings and more, allowing you to improve your castings for a fraction of their cost.

PoligonSoft offers a suite of advanced simulation software designed to enhance and refine the process of metal casting. This software suite empowers users to anticipate potential defects in the final product. Key Analysis Features Include: Fluid Flow during Pouring Formation of both Large and Microscale Porosity Stresses that Remain After Solidification Distortions and Shape Changes Development of Fractures at Various Temperatures Fluid Pressures Erosion of the Mold Material Our software stands out for its ability to streamline production, reduce material waste, and eliminate the need for repeated designs, thereby ensuring that the production cycle is optimized from the start. PoligonSoft's analytical capabilities are built upon three fundamental systems: fluid dynamics, heat transfer, and mechanical stresses. These, combined with an array of advanced features, facilitate the simulation of a wide range of casting methods, including specialized techniques.

SoftCAST™ is a multi-award-winning metal-casting-simulation software package for foundries and investment-casting facilities. SoftCAST™, a multi-award winning metal-casting simulation software package, allows engineers to simulate the behaviour of the casting process while manufacturing. This is often used in predicting, in a digital world, potential defects and quality issues with the cast part. SoftCAST™, with its design modules, allows for easy development of new products and processes. It also provides options to optimize existing products and processes. SoftCAST™, a program for mass production and batch production, is also suitable for jobbing lines. It can simulate a wide range of casting complexity, including single and multi-cavity mould designs, low- to very-high-weight castings and cast sections with no limit on thickness. SoftCAST™ is different from our competitors' products in that it is not only a simulation program, but also has its own design modules.

MAGMASOFT is an effective and comprehensive optimization tool that can be used to improve metal casting quality and reduce production costs. By utilizing the virtual Design of Experiments (DOE) and Autonomous Optimization methodology, robust process parameters and optimal casting layouts can be developed for all cast materials and processes, including heat treatment and melting metallurgy. MAGMASOFT® simulations can be used to create an automated virtual test plan using autonomous engineering™. This allows for the pursuit of different quality and cost goals simultaneously. Broad knowledge and tangible hands-on instructions/measures are generated considering design and process conditions for mold filling, solidification, and cooling. The results include residual stresses and distortions, microstructure formation and local properties.

This software is quick and easy to use, allowing you to simulate your castings within minutes. NovaOne is NovaCast’s basic collection of casting simulation software, streamlined to meet specific process demands. NovaOne is a slim version of our premium casting simulation system, NovaFlow&Solid.NovaOne Gravity is an innovative casting process simulation tool that simulates mold filling and solidification. NovaOne Gravity allows you to simulate gravity sandcasting, gravity permanent molds, and the lost wax method. NovaOne HPD simulates both the cold- and hot chamber methods. It is possible for NovaOne HPD to simulate all commercial materials that are used in high-pressure die cast, such as aluminum alloys and Zinc alloys.

The software allows you to analyze your manufacturing process quickly and accurately, from the first casting to the final solidification. You can predict manufacturing defects and produce high-quality parts, reducing the need for prototyping. In a market that is highly competitive and constantly changing, simulation has become an essential part of the development cycle for high-value cast components. THERCAST®, a modular and complete solution, will provide you with valuable assistance for the production of ingots castings or continuous casting. Thercast® integrates the liquid/solid thermomechanical coupling that is involved in material transformation. This implementation allows you to study all types phenomena: ladle flow and tundish, primary and secondary heating, deformation when in contact with rollers, and spray-induced cooling. THERCAST®, a multilingual graphic interface, offers a business-oriented working environment.

Ansys Sherlock, a reliability-physics-based electronic design tool, provides fast and accurate life predictions at the component and board levels for electronic hardware in early design stages. Ansys Sherlock automates the design analysis of electronic hardware. It provides accurate and fast life predictions at the component, board, and system levels during early design stages. Sherlock bypasses the 'test-fail-fix-repeat' cycle by empowering designers to accurately model silicon-metal layers, semiconductor packaging, printed circuit boards (PCBs) and assemblies to predict failure risks due to thermal, mechanical and manufacturing stressors--all before prototype. Sherlock quickly converts embedded libraries containing more than 500,000 parts into computational fluid dynamics and finite element analysis models. Each model includes accurate geometries, material characteristics, and stress information.

You are now faced with the dilemma of finding out that your first off-tool parts have pinholes, shrinkage or hot spots. You have two options: either ship the parts to an unhappy customer, or go back to the design phase to fix the problem and make sure it is free of defects. It is important to ensure that your gating design is robust against process variations, as this is an important step in the casting development timeline. ESI ProCAST allows you to cast parts accurately the first time. You can meet your deadlines and avoid costly scrap parts and late redesigns. ProCAST has been trusted by customers for decades as their primary tool for casting basics, including filling, solidification and porosity prediction. It also predicts complex issues such as deformations or residual stresses thanks to its finite element technology.

SOLIDCast Casting Simulator software is the most widely used pc-based solidification model system and cast design software in the casting industry. SOLIDCast was developed by analyzing and focusing real-time issues and problems when designing and making solid castings. The Casting Simulation software developers are not academic software engineers. They have real experience in the casting industry and foundries. Since 1985, they have used their experience to improve SOLIDCast's Casting Simulation software as well as the SOLIDCast product family. SOLIDCast is the most practical software for the casting industry because of their combined experience in Software engineering as well as foundries.

With JSCAST®, you can get the closest results to reality in all your casting processes, such as sandcasting, pressure diecasting, investment casting and tilt casting. JSCAST®, with its proven results, guarantees your success in the casting process. You can use the entire CPU of your computer at no extra cost with JSCAST®. We offer both new techniques and established rules to help you compete in the global market. JSCAST®, the casting simulation software, will help you to create designs that are optimized for the flow of liquid metal. You can also place the cooling lines, thermal regulation lines, runner gates and overflows in the best possible places.

Many of the products we use every day are made from metal casting. This critical manufacturing process can waste a lot time and resources if it is not planned or optimized correctly. Click2Cast can solve these problems by performing a simulation. SolidThinking's Click2Cast software is an easy-to-use simulation of casting. It helps designers and engineers to understand how their product will be cast before investing a lot of money or time on the iteration. Click2Cast includes even pre-determined five-step casting templates. Simulation early in the process helps organizations to ensure that they meet all of their safety, quality, performance, and standards. It helps users understand how to optimize parts for the most cost effective operations.

ColdStream is an engineering platform for thermal simulation that runs in the cloud. It supports your entire thermal management process, from thermal design to thermal analysis. Diabatix's Thermal Simulation Software allows your business to accelerate product development by using only the latest technologies. Get insights on temperature distribution, heat dissipation and fluid flow, thermal resistance and thermal radiation, cooling capability, and more. ColdStream will find the most suitable heat sinks for your electronic devices and products. In just a few simple clicks, you can upload your geometry, configure the thermal simulator operating conditions, and set the design objectives for your heat sinks.

Simulate all heat transfer phenomena from convection and radiation to storage and dissipation. Simulate both steady-state and dynamic environmental influences. TAITherm is as powerful as it is easy to use. It can solve for solar and thermal radiation as well as convection and conduction in ever-changing environments. TAITherm eliminates the need for complex thermal simulations, and ensures your design will perform optimally in real-world scenarios. TAITherm has been used by thousands engineers and teams worldwide. TAITherm is used by our customers for a wide range of applications, including the latest advancements and technologies in automotive, electronics wearables, military, architecture, and other fields. Thermal simulations and thermal analyses are helping our customers push the boundaries of technology. They increase usability, safety and effectiveness for their industries.

MSC Nastran is a multidisciplinary application for structural analysis that engineers use to perform static, dynamic and thermal analysis in the linear and nonlinear domains. It also includes automated structural optimization and award-winning embedded fatigue analysis technologies. All of this is enabled by high performance computing. MSC Nastran is used by engineers to ensure structural systems are strong, stiff, and durable. This helps to prevent structural failures (excess stress, resonance, buckling or other detrimental deformations) which could compromise structural function and safety. MSC Nastran can also be used to improve structural designs' economy and passenger comfort. Creating industry-leading product differentiations or optimizing existing designs can lead to industry advantages. Reduce downtime and costs by resolving structural problems that may arise during product service.

Simcenter Nastran is a leading finite element method (FEM), solver for computational performance and accuracy, reliability, and scalability. Simcenter Nastran offers powerful solutions for structural analysis, optimization, aeroelasticity, thermal analysis and rotor dynamics. Simcenter Nastran provides all the solutions in one solver. This simplifies modeling and makes it easier to use all solution types. Simcenter Nastran is available as a standalone enterprise solver and as an integrated solver within Simcenter 3D. It helps manufacturers and engineering suppliers in aerospace, electronics, heavy machine, medical device, and other industries with their critical engineering computing requirements so they can produce safe and reliable designs in shorter design cycles.

SINDA/FLUINT is a powerful and proven heat transfer and fluids simulation tool that has been providing users with these capabilities for decades. These capabilities continue to grow each year. SINDA/FLUINT provides a generalized, comprehensive tool for simulating thermal/fluid system simulations, such as those used in the electronics, automotive and petrochemical industries, power generation, medical and aerospace industries. SINDA/FLUINT allows you to gain a better understanding and save time and money through a faster and easier design process. You decide what is important, and how you want to answer your design performance questions. The application is also completely extensible, making it the most versatile software product for thermal and fluids on the market. You can choose which features you want and decide on the accuracy and approximation levels that are appropriate. Also, you can decide on what outputs you need.

Simcenter Flotherm, with its 34 years of development, user feedback and extensive experience in electronic cooling simulations for thermal analysis, is the leading software solution. It accelerates development from IC packages, PCBs, and enclosures to large systems, such as data centres. Fast, accurate CFD simulations of electronics cooling can improve electronics thermal management and reliability from the initial pre-CAD exploration through to final verification. Simcenter Flotherm is a tool that integrates into the electronics development workflow to allow thermal engineers to run simulations, and to provide accurate results in a timely manner. It also provides feedback to other engineering functions. It supports thermal management and simulation-based decisions from early-stage architectural to final thermal design validation. This helps reduce development time and eliminates the risk of expensive reliability-related warranty costs, or any late-stage respins.

Inspire is a collaborative tool that accelerates the creation, optimization and study of innovative and structurally efficient parts and assemblies. It can be used early in product development. Inspire's award-winning user experience for geometry modification and creation can be learned in a matter of hours and delivers reliable Altair solver power. As independently validated and verified by NAFEMS, structural analysis can be performed with the speed and accuracy provided by Altair®. SimSolid® allows for the analysis of large assemblies and complex parts. Dynamic motion simulation and loads extraction using the reliable multi-body system analysis of Altair®, MotionSolve®. The industry standard for structural efficiency, topology optimization of Altair® OptiStruct®, for the generative designing of practical, viable and manufacturable geometries. Inspire allows both designers and simulation analysts to do what-if analyses faster, easier, earlier, and more collaboratively.

Simcenter MAGNET provides a powerful electromagnetic simulation solution to predict the performance of motors and generators. It can also be used for predicting the performance of sensors, transformers. actuators, solenoids or any other component with permanent magnets. Simcenter MAGNET allows you to predict the performance of any part with permanent magnets or coils. Simulate low-frequency electromagnetic fields. Simcenter MAGNET has the ability to accurately model electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows complex problems such as magnetic levitation and complex motions to be accurately modelled and analyzed. A unique smart remeshing technology makes this possible.

6SigmaET is an electronic thermal modeling tool that uses advanced computational Fluid Dynamics (CFD), to create precise models of electronic equipment. Our thermal simulation software is specifically designed for electronics. It offers unparalleled intelligence, automation, and accuracy to help you meet all your requirements and overcome any thermal design challenges. 6SigmaET is the fastest-growing thermal simulator software in the electronics cooling market since its inception in 2009. 6SigmaET's versatility allows you to simulate the thermal performance electronic components, from the smallest ICs up to the most powerful servers. Watch one of our videos to learn more about 6SigmaET's benefits for your industry. Or, browse our case studies. You can import the entire CAD geometry and PCB designs into 6SigmaET to perform thermal analysis. This will reduce the time it takes to create models.

Simulating and analyzing your product design will reduce the cost of physical prototyping and increase your products' durability and reliability. It is crucial to your product development to use digital prototypes to understand the performance of your designs in real-world situations. Creo Simulation was designed exclusively for engineers. It includes structural, thermal and vibration analysis solutions, as well as a comprehensive set finite element analysis (FEA). You can validate and analyze the performance of 3D virtual prototypes with Creo Simulation before you even make the first part. We offer unique and flexible simulation solutions to our customers. This section will give you a better understanding of what we can do to meet your needs. Contact a Creo representative if you have any questions regarding our tool stack.

FloCAD®, a fluid dynamics module for Thermal Desktop®, and together they provide a complete thermohydraulic tool for integrated fluid flow analysis and heat transfer analysis. FloCAD is very similar to building thermal models. Many of the commands can be used to build fluid flow models. FloCAD models are available in two formats: they can be free-form (non geometric), sketchpad-style flow network modeling for abstraction, simplification, and convection to finite differences of finite element representations. FloCAD is a generalized software tool for capturing pressure drops in a piping system due to bends and valves, tees and changes in flow area.

SimScale, a web-based cloud application, plays an important role in simulation software for many industries. The platform supports Computational Fluid Dynamics, Finite Element Analysis (FEA), as well as Thermal Simulation. It also provides 3D simulation, continuous modeling, motion & dynamic modelling.

FLOW-3D is a highly accurate CFD software that solves transient, free-surface issues. It can help you optimize product designs and reduce time to market. FLOW-3D's multiphysics suite also includes FlowSight, our state-of the-art postprocessor. FLOW-3D is a versatile CFD simulation platform that engineers can use to study the dynamic behavior liquids and gases in a variety of industrial applications and physical processes. FLOW-3D is a free surface and multiphase simulation platform that serves a wide range of industries, including aerospace, microfluidics and bio-medical devices as well as water civil infrastructure and automotive. FLOW-3D is a multiphysics tool that is unique in its power and versatility. It helps engineers achieve their modeling goals.

Ansys Fluent, the industry-leading fluid sim software, is known for its superior physics modeling capabilities as well as industry-leading accuracy. Ansys Fluent allows you to innovate and optimize your product performance. You can trust your simulation results when you use software that has been thoroughly tested across a variety of applications. Ansys Fluent allows you to create advanced physics models, analyze fluid phenomena, and more - all in an intuitive and customizable environment. This powerful fluid simulation software will accelerate your design cycle. Ansys Fluent has the best-in-class physics models. It can efficiently and accurately solve large, complex models. Ansys Fluent unlocks the potential for CFD analysis. Fluid simulation software that is fast and efficient. This software will help you to be the best in the market. Fluent's industry-leading features allow for endless innovation without compromising on accuracy.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

Thermal Desktop is a complete model creation tool. Objects such as finite element, lumped capacitance, and built-in finite differences can be combined in any way. Thermal-specific objects, such as insulation, heat loads and heaters, can be added to any model, from automotive components to manned satellites. Thermal Desktop allows full parameterization by using variables and arbitrarily complicated expressions instead of hardwired numbers. These variables, also known as symbols, enable models to be quickly manipulated by a few keystrokes. This makes it easy to update or maintain the model, perform sensitivity studies, and investigate what-if scenarios. This gives you access to SINDA/FLUINT’s optimization and reliability modules, as well as automatic model correlation.

RadCAD uses an ultra-fast Monte-Carlo ray-tracing algorithm that is accelerated by octa-trees to compute radiation exchange and view factors. C&R Technologies' innovations to the ray-tracing process resulted in a highly efficient thermal radiation software. RadCAD models diffuse or specular surfaces accurately, regardless of the density of nodes. The number of nodes is determined by the thermal solution, not by the accuracy requirements for the radiation. RadCAD uses user-defined databases for optical properties. Each surface coating defines absorptivity and transmissivity as well as reflectivity and specularity for both solar and infrared spectrum regimes. These properties can be defined in relation to incident angle, or even wavelength dependence.

Pyris™, the benchmark for high-sensitivity thermal analyses, brings your PerkinElmer thermal instruments and data to life. Pyris, the most popular choice for thermal analysis, is user-friendly and intuitive. It also offers a variety of standard features to maximize flexibility. Pyris is the perfect software for any application, whether it's a fully automated research lab, an automated QA/QC laboratory, or a standalone instrument. Pyris software is constantly improved based on feedback from customers to ensure maximum user satisfaction. A common platform for the instruments makes it simple to use and easy to learn. Pyris software is simple to use, but does not lose its capabilities. The software allows you to run multiple analyzers at the same time and conduct data acquisition and analyses in one window. Data import/export flexibility and a wide range of analytical options.

Our STARe software sets the standard for thermal analysis. It offers virtually limitless evaluation options. Modularity, flexibility and automation are some of its unique features. The software helps you stay compliant in a regulated field. All of our thermal systems can be controlled by a single powerful software platform. We offer the most comprehensive line of thermal systems and instruments. Our thermal analysis software, STARe, is easy to use and powerful. The instruments receive measurements and experiments, and the curves are evaluated instantly based on user preferences. STARe is the industry standard in thermal analysis software. It is a software that is extremely flexible and offers almost limitless possibilities for evaluation. STARe is the comprehensive software that powers METTLER TOLDEO’s thermal analysis systems. It simplifies workflows.

Vampire (Virtual Additive Manufacturing System): This software simulates 3D printing in order to predict and analyze the results. It also performs heat transfer analysis and deformation analysis based on thermal expansion and prediction. It is important to identify and address various manufacturing problems in advance, as 3D additive manufacturing can be expensive and time-consuming. This can be done by using analysis techniques that are suitable for additive manufacturing. Vampire offers key tools to build a smart preprocessing system for this purpose.

CoTherm, a coupling software and process automation program, acts as a liaison between CAE programs. CoTherm simplifies process automation. It can be used to run sensitivity studies, design of experiments or multiple CAE models in a single process. This capability can streamline preprocessing, thermal analysis or transient analysis. CoTherm provides templates for common coupling and automation tasks. CoTherm has optimization capabilities to determine the best inputs for your design. The general optimization sub-processes can be used to optimize any CAE analysis. CoTherm’s mathematically rigorous solution, including multiple global and local methods, removes guesswork from your design process. CoTherm supports a wide range of thermal and CFD code. CoTherm’s powerful tools enable the coupling of any program that can be run from the command line or config files.

CONSELF allows you to use Computational Fluid Dynamics and Finite Element Analysis (FEA), which can be used to improve the design of your product: minimize drag and fluid dynamics losses; maximize heat exchange performances; estimate pressure loads; verify material resistance; evaluate components shape deformation; calculate natural frequencies, modes and other modes. Structural Mechanics can be performed dynamically or statically, using both elastic and non-elastic materials. You can also perform frequency and modal analyses starting from the most common CAD neutral file formats.

Original equipment manufacturers all over the world face the same challenge: how to manage their mold assets. While OEMs spend millions of dollars on the development of molds to make their products and packaging, they often neglect asset and tool life management. Large companies may have thousands of molds that can be found in different locations across the globe. It can be even more difficult for large companies to manage inventory and control their fixed assets if they outsource any part of their manufacturing. COAST's sole focus is to help mold managers turn these challenges into opportunities that reduce risk, strengthen core manufacturing operations, and increase profitability. Our unique Global Mold Management program combines cloud-based Asset Management Technology and expert support to help moldmakers save time and money. This allows them to not only track assets but maximize their use.

Based on a density map, REM3D® can predict parts resistance, as well as noise, insulation and comfort properties. Simulate a dual foam pouring to observe the transition zones. By taking into account "mold-tilting", realistic process conditions are translated to be as near to reality as possible. Integration of functionalities, such as automatic mould tilting or gravity's impact on melt flow, allows you to analyze real conditions in your processes and guarantee homogeneity. The study of the injection positions limits the occurrence of defaults. You can make accurate predictions about the resistance of your parts, but also the insulation and comfort properties of foams. REM3D®, for plastics with fibres, determines the orientation of the fibers during the filling phase and after cooling.

Fusion 360 with PowerMill®, CAM software, provides expert CNC programming strategies for complex 3-and 5-axis manufacturing. Fusion 360 Team and Fusion 360 Extensions now available. PowerMill offers a wide range of strategies. Rapid toolpath calculation reduces programming time. Simulate, verify, optimize, and optimize motion for CNC machines and industrial robotics. Fusion 360 allows 3D modeling, generative designing, simulation, electronics and collaboration. To prepare complex geometry for better CAM programming, you can use modeling for manufacture tools. Simulator tools can be used to improve the design of plastic parts and optimize the tools used to make them. This US manufacturer uses Autodesk Moldflow, PowerMill and PowerShape to design and manufacture high-quality injection moulds.

Since over 25 years, PSIM has been the leading simulation and design software in power electronics and motor drives. PSIM's intuitive, user-friendly GUI and robust simulation engine are the perfect solution for users to meet their simulation and design requirements. PSIM can perform quick power converter losses calculations, motor drive efficiency calculation, conducted EMI analysis and analog/digital controls. PSIM offers automatic embedded code for rapid control prototyping. With PSIM's Design Suites, users are able to design power supplies, electromagnetic (EMI) filters and motor drive systems quickly.

INFOMAN eDMS automates key areas of an Automobile Dealership like Vehicle Indenting & Purchase. Vehicle Stocking. Booking, Billing & Financial Accounting. INFOMAN - eDMS gives "the power to effectively supervise every aspect of your Dealership Operation" and responds to the ever-changing market conditions in the Auto industry. Dealership of Audi, Renault, Jaguar MG Motors Volkswagen, Nissan, Kia Mahindra, Hyundai TATA, Honda BMW Mercedes, Jeep, Skoda Toyota Bajaj Hero Ather with more than 800+ locations are using INFOMAN eDMS for their backend operations.

Moldex3D is the most popular CAE product in the plastic injection molding industry. Moldex3D is the best-in class analysis technology and can be used to perform in-depth simulations of a wide range of injection molding processes. It can also help you optimize product designs and manufacturing. Moldex3D's high compatibility and adaptability allow users to instantly connect to major CAD systems, creating a flexible, simulation-driven design platform. Moldex3D was created for auto designers and engineers to create and verify complex parts/molds using true 3D technology. Moldex3D allows auto designers and manufacturers to manage the entire product life cycle, from conception through design, manufacturing, and distribution. This helps suppliers and component designers to identify potential problems early on. Visualization of the entire process of injection molding auto parts is a great way to find solutions faster.

Additive Works offers software solutions that aim to achieve a "first time-right" additive manufacturing process. This is achieved by integrating new analysis tools and simulation tools into the process chain for Laser Beam Melting processes (LBM/SLM/DMLS, Metal 3D Printing). The current needs and challenges of industrial additive manufacturing drove the development of the software suite Amphyon. It aims to reduce pre-processing costs, and to take metal AM to the next stage of automation. The ASAP-Principle outlines four steps that will lead to a stable, reliable, and efficient process chain: Simulation, Adaption, Assessment, and the Process itself. On the Assessment stage, we can calculate both the limitations and the optimal orientations by examining all possible buildups in relation to the economic and physical aspects.

Software to Calculate the Least Cost Charge Mix. OPTIMIX, an innovative software designed for melt shops, allows customers to save money by literally going into smoke. The software uses Mathematical Programming to calculate the Least Cost Charge. Recipe that uses the raw materials in your foundry for the desired metal grade. Simulator for Charge Mix. Multiple Furnaces configuration. Module Constraints Configuration. In Charge Mix Calculation, Consideration of Heel (Metal back to Furnace). Inventory Integration (Batch-wise Option) Integration with other ERP/Softwares. Excel/API What-If Analysis Reports. OPTIMIX should be a must-have product for any foundry. Here's why. Cost Savings Mathematically, it is possible to calculate the lowest cost charge mix recipe. Complete Control. You have complete control over your final product. ROI. Product that delivers ROI in a matter of months! Feel Confident.

Software for finite element analysis using CAD-embedded software. You can use a wider range of study types and materials to aid your analysis. Inventor®, Nastran®, provides finite element analysis tools for engineers and analysts. Simulation includes many types of analysis, including dynamics, heat transfer, linear and nonlinear stress and dynamics. Inventor Nastran can only be found in the Product Design & Manufacturing Collection. The Product Design & Manufacturing Collection includes advanced simulation, 5-axis CAM and nesting tools, as well as AutoCAD and Fusion 360.

The SIGMASOFT® VIRTUAL MOULDING simulation software provides you with a significant edge in the injection and compression mold industry: - Evaluate and optimize processes & complete moulds - Increase efficiency, productivity and part quality - Reduce waste associated with trial and error

Metariver Technology Co., Ltd. develops innovative and creative computer-aided engineering (CAE) analysis S/W based upon the most recent HPC technology and S/W technologies including CUDA technology. We are changing the paradigm in CAE technology by using particle-based CAE technology, high-speed computation technology with GPUs, and CAE analysis software. Here is an introduction to our products. 1. Samadii-DEM: works with discrete element method and solid particles. 2. Samadii-SCIV (Statistical Contact In Vacuum): working with high vacuum system gas-flow simulation. 3. Samadii-EM (Electromagnetics) : For full-field interpretation 4. Samadii-Plasma: For Analysis of ion and electron behavior in an electromagnetic field. 5. Vampire (Virtual Additive Manufacturing System): Specializes in transient heat transfer analysis.

In markets where safety of welded assemblies are essential, analysis using TRANSWELD®, offers a global solution to anticipate welding defect. Our simulation software integrates multiple physical models to simulate the actual behavior of the metal when it is in a liquid/mushy condition to perform a comprehensive analysis of the material's evolution. TRANSWELD®, enables the study of the microstructure in the solid-state assembly. You can then ensure the conformity without having to go through the prototyping phase. Our software is 100% predicative. You can observe welding processes numerically using real conditions. You can, for example, visualize the heat source movements during the simulation of laser or arc welding.

Cast It is used by every major television and film studio to make casting decisions. Cast It is used by more than 10,000 casting professionals, producers, directors, and studio executives every day. Our community of over 250,000 talent representatives and actors receives the information and tools they need to succeed. Cast It Talent is open for both union and nonunion actors as well as unrepresented and represented talent. Cast It Talent is open to talent from all over the globe, not just Los Angeles or New York. Cast It Talent is also open to managers and agents. Set up client accounts. Log in to your account and click on the "Talent Rep" tab. The rest of the fields (first, last, agency, management company, etc.) will be auto-populated once you have entered your representative's email address. Next, click the "send" button at the bottom.

FORGE®, a software solution that simulates hot and cold forming, is available. Transvalor's flagship product for nearly 35 years, it is still in use by customers around the globe. FORGE®, is a software that meets the needs of companies manufacturing forged parts for a variety industrial sectors. FORGE®, a unique software, has point tracking that can easily detect cold-shut areas and predict metal fibering. This is critical to ensure forgings have good mechanical properties. Innovative marking techniques enable you to materialize the billet's segregations or identify flow-through defects. FORGE®, which predicts forging loads, energy consumption, and power development during each deformation operation, is available from FORGE®. This will allow you to predict the effort required, balance forging loads among the various stages, and view die balancing or deflection problems.

Screen mirroring for Samsung LG & Roku allows you to mirror your iPhone or iPad screens to Roku TVs, Samsung LG & Roku in high quality. Our screen mirroring app cannot be used to play games on TV. The average delay time is between 5s and 6s. We are working hard on making it possible for gamers. Mirror any app or game (for watching) wirelessly to your iPhone/iPad screen to your Samsung (without sound), LG & Roku televisions over your WiFi network. To mirror on Samsung, LG & Roku TVs, open the app and click Start Mirroring. To stop mirroring, click on the top red line of your iPhone. The app is best for iPhone 7 and above, iPad 3 and above, iOS 12+, iOS 12 +. Cast youtube videos directly to TVs. There are no cables, additional hardware or anything else. Stream your favorite movies and applications on big Samsung, LG, & Roku TVs. Cast youtube videos to Samsung LG & Roku TVs.

PV Elite®, a complete solution to vessel and heat exchanger design analysis, evaluation and evaluation. It is easy to use and learn, making it ideal for those who need quick start-ups and confidence in their safety code calculations. PV Elite evaluates the entire vessel and addresses all wall thickness rules as well as stress analysis requirements for horizontal vessels, vertical towers, and heat exchangers. It also evaluates and rerates existing vessels, including Fitness for Service analysis. PV Elite®, is your complete solution to vessel and heat exchanger design analysis, evaluation and evaluation. PV Elite users have successfully designed equipment for the most extreme applications. They have done this quickly, accurately, and profitably. Data Collection PV Elite makes it easy to define pressure boundary conditions for vessels or exchangers, even for load sets that require a lot of data input. PV Elite simplifies data entry by breaking down the input into manageable subsets.

Simulate the reaction of materials to short-term severe mechanical loadings, high pressures, and even explosions. Ansys Autodyn offers advanced solutions without compromising ease-of-use. Ansys Autodyn allows you to quickly understand large material deformations and failures. Autodyn offers a variety of models that can be used to model complex phenomena like the interaction between liquids, solids, and gases; phase transitions in materials; and the propagation and propagation of shock wave. Ansys Autodyn integrates within Ansys Workbench, and has its own native-user interface. This allows you to produce precise results in a short time and with minimal effort. The smooth particle hydrodynamics solver completes this picture and provides everything necessary for explicit analysis. Ansys Autodyn allows you to choose from different solver technologies, so that the most effective one can be used for a particular part of the model.