Alternatives to AVEVA Process Simulation

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

DigitalClone®, for Engineering is the only software that integrates multiple scales of analysis into a single package. It is the world's best gearbox reliability prediction tool. DC-E, in addition to the modeling and analysis capabilities at the level of the gearbox and the gear/bearing, is the only software that models fatigue life using detailed, physics-based models (US Patent 10474772B2). DC-E allows the construction of a digital twin of a gearbox. This includes all stages of the asset's lifecycle, from design and manufacturing optimization to supplier selection to failure root cause analysis to condition based maintenance and prognostics. This computational environment reduces the time and cost of bringing new designs to market and maintaining them over time.

Ansys Motor-CAD serves as a specialized tool for the design of electric machines, facilitating rapid multiphysics simulations throughout the entire torque-speed operating range. It allows design engineers to assess various motor configurations and concepts to create designs that maximize performance, efficiency, and compactness. With its four integrated modules—EMag, Therm, Lab, and Mech—Motor-CAD enables quick and iterative multiphysics calculations, significantly reducing the time from initial concept to finalized design. This efficiency in calculations and streamlined data input processes provides users with the opportunity to investigate a broader array of motor topologies and thoroughly evaluate the effects of advanced loss mechanisms in the early phases of electromechanical design. The latest release boasts enhanced capabilities for design optimization, multiphysics analysis, and system modeling tailored specifically for electric motors, ensuring that engineers have the tools they need for cutting-edge development. Ultimately, Motor-CAD's fast multiphysics simulation capabilities across the full torque-speed range empower engineers to innovate and refine electric motor designs with unprecedented efficiency.

Harnessing the capabilities of SaaS through our industrial cloud platform, AVEVA Connect, AVEVA Unified Engineering provides a data-driven environment designed for real-time access to engineering data. This innovative platform encompasses the entire lifecycle of your project, from conceptual design through front-end engineering and detailed design phases. It ensures data transparency across various project disciplines and throughout all phases of design, making it the sole data-centric environment that integrates process and asset engineering lifecycles. By facilitating conceptual, FEED, and detailed engineering design from one centralized hub, collaboration among teams and external suppliers is significantly enhanced. Develop a digital twin featuring real-time project data to foster engineering visibility among all project stakeholders while minimizing the burden of handovers. Additionally, the platform allows for secure operations anytime and anywhere, thereby boosting productivity, empowering your workforce, and enabling rapid scalability in response to evolving project demands. Ultimately, this approach not only streamlines engineering processes but also elevates the overall project management experience.

ProSimPlus is a chemical simulation software that is intuitive and easy to use. Users can quickly get used to it. This software is used by many of the world's most prominent oil, gas, chemical, energy, or bio-based companies.

Honeywell's UniSim® Design Suite serves as a multifunctional software solution for process simulation and modeling, allowing engineers to develop both steady-state and dynamic models aimed at enhancing plant design, optimization, and troubleshooting efforts. This suite includes features tailored for sustainability initiatives, such as carbon capture and the generation of green hydrogen, thereby promoting enhanced operational efficiency and alignment with business objectives. Additionally, UniSim models can function as digital twins, providing capabilities to track plant performance, forecast changes in processes, and bolster safety, output, and profitability in various operations. Ultimately, this tool empowers engineers to make informed decisions that contribute to a more sustainable and efficient industrial landscape.

Utilize COMSOL's multiphysics software to replicate real-world designs, devices, and processes effectively. This versatile simulation tool is grounded in sophisticated numerical techniques. It boasts comprehensive capabilities for both fully coupled multiphysics and single-physics modeling. Users can navigate a complete modeling workflow, starting from geometry creation all the way to postprocessing. The software provides intuitive tools for the development and deployment of simulation applications. COMSOL Multiphysics® ensures a consistent user interface and experience across various engineering applications and physical phenomena. Additionally, specialized functionality is available through add-on modules that cater to fields such as electromagnetics, structural mechanics, acoustics, fluid dynamics, thermal transfer, and chemical engineering. Users can select from a range of LiveLink™ products to seamlessly connect with CAD systems and other third-party software. Furthermore, applications can be deployed using COMSOL Compiler™ and COMSOL Server™, enabling the creation of physics-driven models and simulation applications within this robust software ecosystem. With such extensive capabilities, it empowers engineers to innovate and enhance their projects effectively.

Siemens NX software offers a robust and adaptable integrated platform that enhances the efficiency and speed of product delivery. This innovative solution brings forth advanced design, simulation, and manufacturing capabilities, allowing organizations to harness the potential of the digital twin concept. NX supports all phases of product development, covering everything from initial concept design to engineering and manufacturing, providing a cohesive toolset that integrates various disciplines, maintains data integrity, and ensures design intent, thereby optimizing the overall workflow. One particularly effective approach within NX is the generative design process, which empowers engineers to swiftly create new products while adhering to specific design parameters. This iterative methodology yields quick results, enabling engineers to refine designs through variations in constraints until they achieve optimal solutions that satisfy all project requirements. Ultimately, this flexibility in design processes enhances innovation and accelerates time-to-market for new products.

AVEVA PRO/II™ Simulation serves as a steady-state simulator that enhances plant efficiency by refining process design, conducting operational analyses, and executing engineering studies. By offering a comprehensive approach to optimization, AVEVA PRO/II Simulation focuses on enhancing plant performance through the improvement of process design and operational analysis while also conducting in-depth engineering studies. Capable of performing complex heat and material balance calculations for an extensive array of chemical processes, this simulation tool presents a diverse selection of thermodynamic models applicable across multiple industries. It allows users to devise new processes and assess alternative plant configurations to achieve the most economical operations. Now accessible via the cloud, AVEVA PRO/II Simulation provides on-demand availability, straightforward maintenance, and adaptable usage options. Additionally, users can benefit from a highly experienced support team with over 15 years in the field, ensuring assistance whenever needed. Overall, AVEVA PRO/II Simulation stands out as a robust solution for optimizing plant performance, streamlining design processes, and enhancing operational efficiency.

The world is in a state of perpetual and swift transformation, presenting new challenges, advancements, and opportunities on a daily basis. As these changes unfold, how can we effectively keep pace with them? Additionally, how can we ensure that our environment remains efficient, secure, and sustainable? Recognizing the effects of our actions and choices is crucial to this endeavor. We must consider how to design, run, optimize, and oversee our urban areas, vital infrastructure, and supply chains. The InControl software addresses these issues across all stages of the life cycle. It converts accessed data into predictive and trustworthy analytics, allowing for a better grasp of intricate infrastructures. By disseminating findings and insights from complex and unpredictable scenarios to your stakeholders, partners, and clients, you can address factors related to time, cost, resources, productivity, reliability, safety, and sustainability. Furthermore, Simulation Software empowers you to assess potential or future resource investments effectively. By streamlining and integrating processes, it fosters a "one time right" deployment approach, ultimately reducing time, effort, and expenses. Embracing these tools is essential for thriving in an ever-evolving landscape.

Simcenter STAR-CCM+ is an advanced multiphysics computational fluid dynamics (CFD) software that enables the simulation of products in conditions that mimic real-life scenarios. This software stands out by incorporating automated design exploration and optimization into the CFD toolkit accessible to engineers. With a unified platform that encompasses CAD, automated meshing, multiphysics CFD capabilities, and advanced postprocessing, it empowers engineers to thoroughly investigate the entire design landscape, facilitating quicker and more informed design choices. By leveraging the insights offered by Simcenter STAR-CCM+, the design process becomes more strategic, ultimately resulting in innovative products that surpass customer expectations. Enhancing a battery's performance across its complete operating spectrum is a complex endeavor that necessitates the concurrent optimization of various parameters. In this context, Simcenter delivers a comprehensive simulation environment tailored for the analysis and design of electrochemical systems, fostering a deeper understanding of their behavior. This holistic approach allows engineers to tackle intricate challenges with confidence and precision.

FEATool Multiphysics – "Physics Simulator Made Easy" – a fully integrated physics simulation, FEA and CFD toolbox. FEATool Multiphysics provides a fully integrated simulation platform that includes a unified user interface for several multi-physics solvers such as OpenFOAM and Computational fluid dynamics (CFD), including SU2 Code and FEniCS. This allows users to model coupled physics phenomena, such as those found in fluid flow and heat transfer, structural, electromagnetics acoustics and chemical engineering applications. FEATool multiphysics is a trusted tool for engineers and researchers in the energy, automotive and semi-conductor industries.

Understanding how light travels and influences both product efficacy and human experience is essential for assessing performance and ensuring comfort, perception, and safety. Ansys Optics stands out by effectively simulating the optical characteristics of a system, assessing the ultimate lighting effects, and forecasting the repercussions of variations in lighting and materials on appearance and perceived quality, all within realistic scenarios. With this advanced visualization tool, you can conceptualize your product prior to its creation, thereby enhancing the virtual experience for customers. Allow Ansys Optics and its optical simulation capabilities to guide you towards optimal solutions for any project style. The software adeptly addresses intricate optical challenges while enhancing visual aesthetic quality. By integrating design and engineering into a seamless workflow, you can significantly boost the final quality of your product, creating true-to-life visualizations that resonate with users. Additionally, you can develop and evaluate virtual prototypes of a cockpit HMI within an immersive, real-time setting, providing a comprehensive understanding of user interaction. This process not only improves design outcomes but also fosters innovation in product development.

HAULSIM connects fleet assets, mining operations plans and people to create a 'digital twin of any mining operation - underground or open pit - that accurately represents any mine site haulage operations. HAULSIM, which has a 3-D Discrete Event Simulation engine (DES) at its core, is the only mining simulator software that can quantify changes as the models reflect all aspects of a mine site, including variability, interactions, and dependencies. Real data can be used to make decisions about a mine haulage system. This allows the user to test multiple 'whys' and 'what if' scenarios in order to reduce operating costs, optimise performance, and ensure operational safety and efficiency.

Cosmo Tech offers a comprehensive 360° Simulation Digital Twin platform designed to tackle intricate industrial challenges and enhance enterprise decision-making. Companies in the industrial sector depend on Cosmo Tech to forecast their organizational evolution, enabling them to comprehend the repercussions of their choices and optimize planning at every level, thus ensuring a future that is strong, adaptable, and sustainable. To prepare for unforeseen circumstances, it is essential to create scenarios that simulate potential disruptions within your system. By conducting simulations that account for events such as equipment failures, employee strikes, and rising expenses, businesses can strategically plan for quick recovery in such situations. Identify the various parameters and processes that can be modified within your digital twin to facilitate informed and confident decision-making. Instantly observe all the factors that influence decision outcomes, along with the cascading effects of any adjustments made, providing a clear overview that aids in strategic planning. This holistic approach empowers organizations to navigate complex landscapes with greater agility and foresight.

USIM PAC is advanced software designed for the modeling, analysis, and optimization of industrial processes in a steady-state environment. This comprehensive tool integrates mass balancing with the simulation of various streams and unit operations within a processing plant, all accessible through a unified interface. What sets USIM PAC apart is its ability to provide a detailed and customizable characterization of materials, making it especially beneficial for handling solids and intricate mixtures that are challenging to represent as simple substances. By leveraging this software, engineering professionals can make informed decisions that enhance the efficiency and profitability of their operations, resulting in improvements that are not only faster but also safer. In addition, USIM PAC serves as an all-in-one platform that encompasses simulation, data reconciliation, mass balancing, flowsheeting, equipment sizing, and economic and environmental assessments, facilitating offline process optimization for entire plants or specific sections. As such, it stands out as an essential tool for modern industrial process management and optimization.

CADSIM Plus is an innovative software designed for chemical process simulation, integrating a dynamic simulator based on first principles with a comprehensive Computer Assisted Drawing (CAD) interface all in one solution. It excels in conducting accurate heat and material balances across various chemical processes and is capable of creating intricate dynamic simulations that incorporate control logic and batch operations. The software is equipped with an extensive array of generic process modules and provides optional libraries tailored for diverse applications. CADSIM Plus accommodates a broad spectrum of drawing complexities, ranging from straightforward block diagrams to intricate engineering schematics, and facilitates the export of designs to AutoCAD and other conventional CAD software. With its 'electronic flowsheet' runtime simulation mode, users are provided with interactive and animated tools for simulation, allowing real-time adjustments to process conditions during operation. This versatile software finds applications in process design, troubleshooting, forecasting future process scenarios, and addressing challenges related to dynamic control, making it a valuable asset for engineers and researchers alike. Furthermore, its user-friendly interface ensures that even those new to process simulation can effectively harness its powerful capabilities.

ProModel serves as a sophisticated tool for discrete event simulation and predictive analytics, offering valuable insights for navigating intricate decision-making processes. By utilizing ProModel AI simulation software, you can enhance your system's efficiency while simultaneously mitigating risks. Our solutions, driven by data, cater to industries that demand meticulous planning and forecasting to maintain seamless, effective, and optimal operations. Understanding the implications of operational changes on production and scheduling is critical for both current and future scenarios. Our AI simulation software empowers organizations to create, simulate, and refine factory layouts using a digital twin, quickly project patient counts and bed availability, identify and avert operational bottlenecks, and improve capacity planning and scheduling to facilitate smoother production workflows. With dynamic simulation models, you can achieve superior process management and utilize visual insights to pinpoint the origins and reasons behind bottlenecks, ultimately leading to more informed decision-making and enhanced operational efficiency.

Energy2D is an interactive multiphysics simulation program grounded in computational physics, designed to model the three primary modes of heat transfer: conduction, convection, and radiation, while also integrating particle dynamics. This software operates efficiently on a wide range of computers, simplifying the process by removing the need for switches between preprocessors, solvers, and postprocessors that are usually necessary for computational fluid dynamics simulations. Users can create "computational experiments" to explore scientific hypotheses or address engineering challenges without the need for intricate mathematical formulations. Additionally, development is ongoing to introduce various energy transformation types and to enhance support for different fluid types. While Energy2D excels in accurately modeling conduction, its representations of convection and radiation are not entirely precise, which means results involving these elements should be regarded as qualitative. Over 40 scientific papers have utilized Energy2D as a valuable research instrument, showcasing its adoption in the academic community. As the program evolves, its capabilities are expected to expand further, potentially offering more comprehensive insights into complex physical interactions.

ColdStream is a cutting-edge cloud-based platform for thermal simulation engineering that streamlines every aspect of your thermal management and cooling design workflow, covering everything from thermal analysis to the creation of thermal designs. With Diabatix's advanced thermal simulation software, your organization can accelerate product development by leveraging the latest technology available. Gain crucial insights into heat transfer, including temperature distribution, heat dissipation, fluid dynamics, thermal resistance, thermal radiation, cooling capacity, and much more. Instead of wasting time searching for the most effective heat sinks to manage the cooling of your electronic devices and products, allow ColdStream to handle the process for you. You can simply upload your geometry, configure the necessary operating conditions for the thermal simulation, and establish your heat sink design goals with just a few clicks, making the process remarkably efficient and user-friendly. This innovative approach not only saves time but also enhances the accuracy and effectiveness of your thermal management solutions.

By utilizing CONSELF, you can harness the power of Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance your product designs: reduce drag and losses related to fluid dynamics, boost efficiency, optimize heat exchange capabilities, assess pressure loads, confirm material strength, analyze deformation in component shapes, compute natural frequencies and modes, among various other functions. The platform offers both static and dynamic simulations for Structural Mechanics, accommodating the behavior of materials under elastic and plastic conditions. Additionally, it enables modal and frequency analyses, starting from widely used CAD neutral file formats, ensuring a seamless integration into your design workflow. This comprehensive approach allows for innovative solutions to complex engineering challenges.

MotorcycleMaker is a cutting-edge real-time simulation platform designed specifically for the intricate needs of developing and testing motorized two-wheel vehicles, including motorcycles, e-bikes, and scooters. This innovative tool facilitates precise modeling of real-life testing conditions within a virtual realm, thereby enhancing the efficiency of development workflows. By adhering to the principles of automotive systems engineering, MotorcycleMaker allows for virtual test driving that supports the comprehensive development, adjustment, assessment, and validation of complete systems in realistic environments. It provides a robust, real-time vehicle model that enables the creation of virtual prototypes from the early phases of the development cycle. Additionally, users can customize their experience by integrating their own models or hardware components into the simulation. This adaptability ensures that the platform meets a wide range of user needs, making it a versatile choice for developers in the industry.

Tackle intricate engineering problems by improving the efficiency of simulations. Simcenter 3D stands out as one of the most thorough and seamlessly integrated CAE solutions available. It allows you to create and assess the performance of complex products through groundbreaking advancements in simulation efficiency. By bringing together various physics domains within a single modeling environment, you can quickly gain deeper insights into how your product performs. This integrated platform facilitates all aspects of CAE pre- and post-processing, allowing for a streamlined workflow. With unmatched tools for geometry manipulation, you can easily defeature and simplify CAD geometry from any origin. Additionally, its extensive meshing and modeling capabilities cater to diverse simulation needs, granting you the exceptional ability to connect your analysis model with design data seamlessly. This connection not only accelerates the often tedious modeling process but also ensures that your analysis models remain aligned with the most current design iterations, ultimately enhancing productivity and accuracy in your engineering projects. By adopting Simcenter 3D, you can significantly reduce development time while improving the quality of your simulations.

Adams aids engineers in analyzing the dynamics of moving components and the distribution of loads and forces across mechanical systems. Often, product manufacturers face challenges in grasping the actual performance of their systems until later stages of the design process. While mechanical, electrical, and other subsystems undergo validation in line with their specific requirements during the systems engineering phase, comprehensive testing and validation of the entire system occur too late, resulting in costly and risky rework and design modifications. As the leading and most utilized Multibody Dynamics (MBD) software globally, Adams enhances engineering productivity and lowers product development expenses by facilitating early validation of system-level designs. This allows engineers to assess and manage intricate interactions among various disciplines, such as motion, structures, actuation, and controls, ultimately leading to optimized product designs that prioritize performance, safety, and user comfort. By addressing potential issues earlier in the process, Adams empowers engineers to create more reliable and efficient products.

The Akselos Cloud platform offers a comprehensive framework for Digital Twins through a cloud-based solution. It encompasses a full spectrum of services, from automated updates regarding asset loads and conditions to user-friendly dashboards that clearly display current asset integrity. With Akselos technology, there are no longer any constraints, as it allows for the modeling of intricate issues in structures of any scale with remarkable precision. Our innovative approach accelerates structural simulations, achieving speeds up to 1000 times faster than traditional software. Tasks related to design and operational workflows that previously required months of effort can now be completed in just hours. Furthermore, relevant data, including sensors and process parameters, can be seamlessly integrated with our models, enabling even greater optimization of your assets. Each of our simulations rigorously validates results against applicable engineering codes and standards, ensuring that you can trust your asset’s safety and compliance with all necessary regulations. This comprehensive capability not only enhances efficiency but also fosters greater innovation in asset management and maintenance.

Utilizing the distinctive and inherently dynamic Lattice Boltzmann-based physics, the PowerFLOW CFD solution conducts simulations that effectively replicate real-world scenarios. With the PowerFLOW suite, engineers can assess product performance at the early stages of design, before any prototypes are constructed—this is when alterations can have the most substantial effects on both design and budget. The PowerFLOW system seamlessly imports intricate model geometries and conducts aerodynamic, aeroacoustic, and thermal management simulations with high accuracy and efficiency. By automating domain discretization and turbulence modeling along with wall treatment, it removes the need for manual volume meshing and boundary layer meshing. Users can confidently execute PowerFLOW simulations using a large number of compute cores on widely utilized High Performance Computing (HPC) platforms, enhancing productivity and reliability in the simulation process. This capability not only accelerates product development timelines but also ensures that potential issues are identified and addressed early in the design phase.

Fusion 360 seamlessly integrates design, engineering, electronics, and manufacturing into one cohesive software environment. It offers a comprehensive suite that combines CAD, CAM, CAE, and PCB capabilities within a single development platform. Additionally, users benefit from features like EAGLE Premium, HSMWorks, Team Participant, and various cloud-based services, including generative design and cloud simulation. With an extensive range of modeling tools, engineers can effectively design products while ensuring their form, fit, and function through multiple analysis techniques. Users can create and modify sketches using constraints, dimensions, and advanced sketching tools. It also allows for editing or fixing imported geometry from other file formats with ease. Design modifications can be made without concern for time-dependent features, enabling flexibility in the workflow. Furthermore, the software supports the creation of intricate parametric surfaces for tasks such as repairing or designing geometry, while history-based features like extrude, revolve, loft, and sweep dynamically adapt to any design alterations made. This versatility makes Fusion 360 an essential tool for modern engineering practices.

aPriori is the leading provider of digital manufacturing simulation software that brings product design and sourcing teams closer to production. By leveraging the digital twin within our digital factories, we automatically generate manufacturing insights that helps manufacturers collaborate across the product development process to make better design, sourcing, and manufacturing decisions that yield higher-value products in less time. aPriori solutions are now available in the cloud or on-premise. aPriori combines Product Cost Management, Design for Manufacturing and Sustainability, and Supplier Collaboration capabilities. The platform includes more that 450 manufacturing process simulation and more than 80 regional economic models, to yield insights that accelerate time to market by 20% while achieving hundreds of millions of dollars in cost savings and decreased CO2 footprint. More than 300 manufacturing companies in the world have chosen aPriori Product Design & Manufacture Optimization platform to develop the best sustainable product at the right price and delivered on time.

MASTA serves as a comprehensive collection of CAE tools designed for the creation, simulation, and analysis of driveline systems, spanning from initial concepts to final production. It allows for the precise and swift development of transmission systems, whether starting from scratch or utilizing existing designs. Users gain an in-depth understanding of how mechanical components will perform throughout their lifecycle, particularly under various customer duty cycles. This software enables the early identification of potential failure modes during the product development phase, facilitating quicker adjustments to design. Key performance metrics can be predicted efficiently during the design process, allowing for extensive evaluation of modifications to transmission configurations, component choices, materials, and manufacturing techniques within a simulated environment. Full system simulations are feasible for any transmission or driveline setup, and integrating manufacturing simulations during design helps to minimize both development time and costs. The unique and modern framework of MASTA, developed entirely in C#, enhances its stability and compatibility with current and future operating systems. Overall, MASTA stands out as a robust solution that addresses the evolving needs of driveline design and analysis.

The Ansys Additive Suite provides essential insights that help designers, engineers, and analysts prevent build failures while ensuring that parts meet precise design specifications. This all-encompassing solution covers the full spectrum of the workflow, which includes design for additive manufacturing (DfAM), validation, print design, process simulation, and material exploration. Within the Additive Suite, users have access to tools such as Additive Prep, Print, and Science, along with Ansys Workbench Additive. Many features in Ansys Workbench allow for the creation of parametric analysis systems, enabling the examination and optimization of various parameters like part orientation and positioning. This suite is offered as an additional module for those holding an Ansys Mechanical Enterprise license. The integration of these tools facilitates a more streamlined approach to additive manufacturing, enhancing the overall efficiency and reliability of the production process.

Whether assessing options prior to expenditure or evaluating before excavation, DRAGSIM dragline simulation is designed to help you identify the ideal solution for your mining site. For many years, mining engineers have relied on DRAGSIM to make knowledgeable operational choices, quickly acquiring actionable insights on productivity and production costs with remarkable accuracy. Its comprehensive and auditable features align seamlessly with your company’s governance requirements, instilling confidence in its ability to provide trustworthy and precise information from the mine to executive meetings. You can adjust various parameters to understand the consequences of different scenarios. With over four decades of reliability, DRAGSIM serves as a trusted dragline solution. This system is crafted to enhance the efficiency of equipment and optimize the movement of waste, ensuring that you can make decisions with complete assurance by utilizing its decision support capabilities. By mimicking dragline techniques across diverse operational factors, and integrating aspects like blasting, waste stripping, and other mining machinery into the assessment, DRAGSIM offers a comprehensive analysis that supports effective mining operations. Ultimately, the insights gained can lead to improved strategies and enhanced performance on-site.

Enhance product development and accelerate the launch process with FLOW-3D, an exceptionally precise CFD software adept at addressing transient, free-surface challenges. Accompanied by our cutting-edge postprocessor, FlowSight, FLOW-3D offers a comprehensive multiphysics suite. This versatile CFD simulation platform empowers engineers to explore the dynamic interactions of liquids and gases across a diverse array of industrial sectors and physical phenomena. With a strong emphasis on multi-phase and free surface applications, FLOW-3D caters to various industries, including microfluidics, biomedical technology, civil water infrastructure, aerospace, consumer goods, additive manufacturing, inkjet printing, laser welding, automotive, offshore enterprises, and energy sectors. As a remarkably effective multiphysics resource, FLOW-3D combines functionality, user-friendliness, and robust capabilities to support engineers in achieving their modeling goals, ultimately driving innovation and efficiency in their projects. By leveraging FLOW-3D, organizations can overcome complex challenges and ensure that their designs are optimized for success in competitive markets.

TruckMaker is an advanced real-time simulation platform designed specifically for the needs of heavy-duty vehicle development and testing, encompassing trucks, construction machinery, buses, semi-trucks, and specialized vehicles. This solution facilitates precise modeling of real-world testing conditions in a virtual environment, thereby enhancing the efficiency of development workflows. By aligning with the automotive systems engineering methodology, TruckMaker allows for continuous development, calibration, testing, and validation of complete vehicle systems within realistic virtual scenarios through test driving simulations. It provides a powerful, real-time vehicle modeling capability that enables the creation of virtual prototypes at the initial phases of the development process. Additionally, users can customize their simulations by integrating their own components or hardware models, further tailoring the simulation experience to their specific requirements. This flexibility and realism make TruckMaker an invaluable tool in the heavy-duty vehicle industry.

GENOA 3DP is a comprehensive software suite and design tool tailored for additive manufacturing across polymers, metals, and ceramics. Its simulate-to-print capabilities highlight strong performance and user-friendly interaction, making it an effective choice for diverse applications. With the ability to deliver precision at the micro-scale and significantly minimize material waste and engineering time, GENOA 3DP can be swiftly incorporated into any manufacturing process to ensure optimal additive manufacturing outcomes. Rooted in advanced failure analysis techniques and enhanced by multi-scale material modeling, this tool empowers engineers to reliably forecast issues like voids, net shapes, residual stress, and crack propagation in as-built additive manufacturing components. By offering a consistent approach to enhance part quality, decrease scrap rates, and adhere to specifications, GENOA 3DP effectively connects the fields of material science and finite element analysis, ultimately driving innovation in the manufacturing sector. This integration fosters a deeper understanding of material behaviors, paving the way for more efficient production methodologies.

HyperWorks offers easy-to-learn and effective workflows that leverage domain expertise and increase team productivity. This allows for efficient development of today's complex and connected products. Engineers can now move seamlessly from one domain to another with the new HyperWorks experience. They can even create reports without ever leaving the model. HyperWorks allows you to create, explore, and optimize designs. These designs can accurately model structures, mechanisms and fluids as well as electrical, embedded software, systems designs, and manufacturing processes. The solution-specific workflows improve a variety of engineering processes, including fatigue analysis, CFD modeling, concept design optimization, design exploration, and CFD modeling. Each interface is intuitive and well-designed, and differentiated for each user. It's also consistent and easy to use.

Promote circular economy efforts while addressing global economic issues, evolving market trends, and competitive forces by enhancing performance, quality, and market readiness through leading-edge simulation software tailored for chemicals, polymers, life sciences, and innovative sustainability practices. Aspen Plus stands as the premier process simulator, drawing on more than four decades of expertise and insights from leading chemical firms, complemented by a renowned physical properties database. This software offers comprehensive process modeling that integrates economic, energy, safety, and emissions evaluations, thereby enhancing time-to-market, process efficiency, and sustainability metrics. By leveraging Aspen Plus, the efficiency of chemical operations is significantly boosted, making it a valuable tool for the bulk chemicals, specialty chemicals, and pharmaceutical sectors. This advanced modeling technology not only facilitates the optimization of throughput and product quality but also reduces energy consumption across various processes, paving the way for a more sustainable future. Ultimately, Aspen Plus empowers industries to meet the challenges of modern manufacturing while driving innovation and environmental responsibility.

Adaptive Research is excited to unveil the CAESIM 2024 simulation platform, which is now available for immediate use, featuring enhanced computational fluid dynamics modeling along with multi-physics functionalities. This latest software version introduces innovative tools and features designed to streamline the modeling process, enabling CFD engineers to achieve rapid simulation results with greater efficiency. Additionally, the platform aims to enhance user experience through improved interfaces and capabilities.

Virtually test drive your business processes. Process simulation allows you to take processes for a spin and identify potential roadblocks. Cutting-edge process mapping and simulation software that is designed to help organizations with process improvement, increase efficiency, and reduce waste. Ability to simulate real-world scenarios and provide insights into the performance and bottlenecks of processes. Powerful analytics and reporting capabilities allow tracking and monitoring the performance of processes over time.

SIMULATE is a specialized Discrete Event Simulation (DES) tool designed for Original Equipment Manufacturers (OEMs) to accurately model intricate 3D mining environments with highly customizable, brand-specific mining machinery. This platform is utilized by OEMs around the world to deliver precise, measurable, and effective equipment and service solutions tailored for mining clients. Through SIMULATE, users can effectively demonstrate and communicate the value of their equipment, supported by demonstrated results from simulated scenarios. OEMs have the ability to utilize customer data to create a 'digital twin' of any mining operation, whether it be open pit or underground, thus providing an authentic depiction of the haulage operations at any mine site and showcasing the benefits their equipment and services can offer. Furthermore, SIMULATE employs the most prevalent haulage calculation engine within the mining sector, ensuring alignment and understanding among both you and your clients. By enhancing operational efficiency, this innovative tool not only aims to boost profitability but also helps in achieving a more sustainable mining practice.

SimFlow is a desktop Computational Fluid Dynamics analysis software for Windows OS and Linux OS. It is based upon OpenFOAM libraries and acts as an OpenFOAM GUI. It is a professional CAE package that engineers can use to create 3D simulations. SimFlow is a powerful CFD software that can be used for all purposes. SimFlow combines the intuitive graphical user interface of OpenFOAM®, with the benefits of the open-source OpenFOAM®. SimFlow is free to download and you can use it in an evaluation mode to solve some of the most difficult problems that you face as an engineer or scientist. Perhaps you use CFD software every day or just want to get started on your adventure. SimFlow is a powerful fluid simulation software that allows you to rediscover CFD without any time limits.

The rise in variants, characterized by a preference for batch sizes of one, accelerated product life cycles, and intense cost pressures, underscores the essential role of digital twins across numerous sectors in today's digital era. ISG Industrielle Steuerungstechnik GmbH boasts extensive expertise in developing simulation solutions that provide notable competitive advantages for clients in the mechanical and plant engineering industries. With the introduction of the latest ISG-virtuos 3, this simulation platform expands its capabilities to include manufacturing automation and intralogistics as well. ISG-virtuos serves as an open, collaborative simulation platform that enables the thorough examination and optimization of entire production systems, encompassing all elements such as controls, robots, and material handling in real-time with a deterministic approach. The simulations leverage virtual components that are stored in dedicated libraries, allowing for their continuous reuse and interchangeability, thus enhancing efficiency and flexibility in production processes. This innovative approach not only streamlines operations but also positions companies to better adapt to the ever-evolving market demands.

The engineering standard pipe flow software allows you to manage the entire fluid system's lifecycle. Pipe flow analysis software that is industry leading in accuracy, functionality, and usability. No spreadsheets or hidden costs. Must-read for those who manage, design or operate mission critical fluid processing environments. The cornerstone of the digital transformation journey towards Industry 4.0/Digital Twin Operations Management.

Currently, engineering teams frequently rely on specialized simulation tools from various vendors to assess different design characteristics, which can lead to inefficiencies and higher costs due to the use of multiple software solutions. To address these challenges, SIMULIA offers a comprehensive suite of cohesive analysis products that enable users with varying levels of simulation knowledge and expertise to collaborate effectively while sharing simulation data and approved methodologies without compromising information integrity. The Abaqus Unified FEA product suite provides robust and comprehensive solutions for both standard and advanced engineering challenges, catering to a wide range of industrial applications. In the automotive sector, engineering teams can analyze complete vehicle loads, dynamic vibrations, multibody systems, impact and crash scenarios, nonlinear static situations, thermal interactions, and acoustic-structural relationships, all while utilizing a unified model data structure and integrated solver technology. This seamless integration enhances collaboration and improves the overall efficiency of the engineering process, allowing teams to innovate more rapidly.

MapleSim serves as a sophisticated modeling solution that spans from the use of digital twins for virtual commissioning to creating system-level models for intricate engineering design endeavors, enabling significant reductions in development time and costs while effectively addressing real-world performance challenges. By enhancing control code rather than relying on hardware modifications, you can eliminate vibrations and pinpoint the underlying causes of performance issues through in-depth simulation insights. This powerful tool allows for the validation of design performance prior to moving on to physical prototypes. Leveraging cutting-edge methods, MapleSim not only drastically shortens model development time but also enhances understanding of system behavior and facilitates rapid, high-fidelity simulations. As your simulation requirements evolve, you can easily scale and connect your models. With its adaptable modeling language, you can extend your designs further by integrating components across various domains within a virtual prototype, tackling even the most difficult machine performance challenges with confidence. Overall, MapleSim empowers engineers to innovate with efficiency and precision, ensuring that their designs meet the rigorous demands of modern engineering projects.

Simcenter Amesim, the most integrated and scalable platform for system simulation, allows system engineers to simulate and optimize mechatronic system performance. This will increase overall system engineering productivity, from the initial development stages to the final performance validation and controls calibration. Simcenter Amesim is a combination of ready-to-use multiphysics libraries and industry-oriented solutions. It supports powerful platform capabilities that allow you to quickly create models and perform analysis. This open environment can be easily integrated with major computer-aided designing (CAD), computer-aided engineering and controls software packages.