Hardware

PCI Modems and Linux? 25

Torey asks: "I recently acquired a Fujitsu 985TX laptop which I was informed was very Linux compatible. Well, so far it appears to be only 90% compatible. The built in modem appears to be a PCI modem (lspci reports it is a Lucent Microelectronics modem), which I have experienced to be highly unsupported in the kernel. Has anyone been successful in getting one of these to work? The PnP tools didn't notice it either. Any help would be greatly appreciated." What other PCI modems are problematic with Linux? Which ones do you all recommend?
Red Hat Software

IPChains and Firewalling 20

Vertigo1 asks: &nbsp "I have a Cable Modem with RoadRunner. I have a Dual Pentium 200 machine (w/two NIC's), running Red Hat 6.0 w/the latest errata updates. I am going to setup a firewall w/ipchains. I have a Citrix (ie Terminal Server) behind the firewall I want to connect to from the Internet and an FTP server also. How do I set up IPChains to forward to the Citrix server (which uses tcp port 1494) and then to an internal FTP server (tcp port 21 and ftp-data). I understand how ipchains works and have read thoroughly the IPChains-HOWTO, but I still cannot connect to the Citrix server from the Internet. Please help!" This is a common misconception. IPChains are good for configuring what gets in and out of your network on a packet level, but this is a redirection problem. Anyone know where you can find a a good port redirection program on the 'net?
Linux

Ask Slashdot: Low Cost IP-based Traffic Shaping? 109

Deuteron asks: "Hi! I work for an ISP and we're about to deploy wireless net access and need a way to limit people to the bandwidth they pay for. We're planning on starting out with offering 128k, 256k, and 1M links. The wireless hardware itself (Breezecom if you're interested) will handle the 1M part for us. The tricky part is the lower speeds. I've done some extensive checking and haven't found any IP or MAC address based shapers as of yet. Can anyone point me to some free or extremely low cost solutions? Any leads would be greatly appreciated!"
News

Whatever happened to JABBER ? 6

Another member of clan AC wonders: "Whatever happened to JABBER, The Open Source ICQ replacement, such a good idea, why did it never reach fruition?"
GNOME

GNOME/WindowMaker/SuSE Linux Problems 5

ulissesr asks: "After purchasing the SuSE 6.1 version of Linux, I installed my preferred window manager (WindowMaker) and GNOME. Now, each time I try to initialize GNOME (gnome-session) under WindowMaker (let's say, in xterm) i get the following error: "Unable to connect to server port 35091". I tried to initialize the esound daemon (esd) by putting a call to it in my ~/.xinitrc file, but i get an /dev/dsp error too. My sound card, is a Creative Labs Sound Blaster PCI 64, w/ the ess 1370 chipset. Is there anyway i can run GNOME under WindowMaker with this hardware configuration?"
Encryption

Ask Slashdot: Cryptography in Mail software? 201

Bartmoss asksL: "Obviously, nobody will use encryption if two problems occure: (a) your friends won't be able to read your mail because they don't have crypto, and (b) your software doesn't have crypto. I'm wondering - are there good HOWTO's and info sites on how to plug encryption into leading mail software for UNIX, Mac and Windows? What Windows-Software supports PGP, and which can have PGP support added? Does anybody have information on clients people could use for crypted mails?"
Java

Ask Slashdot: Which Java Applications Server? 168

MistaBobDobalina asks: I am looking at three open-source Java application servers for the purpose of building a database-driven website: Locomotive , Protomatter, and Enhydra. I am curious if anyone has experience with these or any other open source middleware solutions. I am also looking at commercial products but prefer an open product. I am making this query because three-tiered sites are now the norm for E-commerce and this is an area that the Open Source world hasn't addressed as well as operating systems, web servers, and databases have been."
Hardware

Ask Slashdot: Breaking the Computing Bottleneck? 254

MidKnight asks: : "With CPU speeds venturing into the GHz, typical DRAM access times falling towards 6ns, and network speeds trying out the 100Mb waters, the major computing bottleneck continues to be the hard drive. While other hardware speeds grow in orders of magnitude, hard drives aren't much faster than they were in the 70's. So, the question is, when will mass storage speeds start catching up, and what will the cause the revolution?"
Hardware

Ask Slashdot: Wireless LAN Options? 95

fiji asks: "I am contemplating a wireless LAN for my house and was wondering if anyone had found a cheap, reliable, Linux solution. I have been looking at the Linux WLAN page and the ZoomAir cards but was a little put off because the price is $250 for the ISA and $230 for PCMCIA (at buy.com). Also the support matrix at the WLAN driver page shows the ISA as untested under Linux." Has anyone tested the ISA ZoomAir cards yet? What other driver options exist for Wireless LAN?
The Internet

Open Source Neural Networks? 17

Sleexy asks: "Does anyone know of any open source neural network / Artificial Intelligence projects for any platform, or anyone doing open source work in this field?"
Hardware

Ask Slashdot: IDE Software RAID? 181

Edward Schlunder asks: "After setting up Software RAID on a SCSI system at work, I want to do the same at home for fun. Call me crazy, but I'm just completely geeked up about this after seeing it working. The Software RAID documentation says that each hard disk should be on a separate IDE cable and that RAID5 requires at least 3 hard drives. I want to use my two existing IDE hard drives and get the large, fast, and cheap IBM IDE ATA/66 Deskstar 22GXP hard drive to make up the third..." There's one small problem though. Hit the link for more.
Linux

Ask Slashdot: Linux Diskless Clients? 80

Graymalkin asks: "I was wondering if there is a Linux program (or many programs) that would let me have a single server on a LAN and then a bunch of diskless clients. I'd like to make the clients have a motherboard, memory, a processor, and a NIC and get all their info from the server. If possible I'd also like to have all the networked stuff loaded into the server's memory so there's as few disk read/writes as possible. Can I do this?"
Linux

QuickCam VC and Linux. A Lost Cause? 23

Yakumo asks: "I know this is probably a common question, but I have been unable to find anything very constructive on it; is there any third-party support for the QuickCam VC for Linux? I know that neither Connectix, nor currently Logitech have released any specs on it, but I heard rumors that there have been a few reverse-engineering attempts made, and I was wondering if there was any news in that department." I really wish hardware manufacturers would release their specs. I really do.
Science

Ask Slashdot: Storage Capacity of the Human Brain? 518

STUR submitted this interesting question: "Since humans are supposed to have such great minds, I would like to know how much storage capacity a human brain has compared to, let's say, a computer's hard drive. Hrm... If the capacity is high enough, do you think that computers of the future could possibly use the brain as a sort of hard drive or ram chip? Just a little something to think about." I've heard that the brain uses a form of holographic storage to archive its information and I don't know if there is a direct mapping to that and say terabytes of information (warning: I am not an expert!). What do all think?
Linux

Ask Slashdot: Hardware for Headless Linux Boxes 180

Alan Hodgkinson asks: "I would like to setup a bunch of Linux boxes without keyboards and monitors. The systems must be accessable/controlable via their serial ports, including the ability to send them a hard reset. Sun Sparc hardware has this feature. You can remove the keyboard and the system will boot and send all its console output through the serial port. You can even reset the machine by sending a break to the serial port. Is there any hardware available for PCs that will provides this functionality? (And that works on a wide variety of PC hardware). ISPs must face this problem. What do they do? Tips anyone?"
SuSE

ISDN Problems w/ SuSE v6.1 8

ulissesr asks: "Hi there! I just bought SuSE Linux v6.1 featuring linux 2.2.7 and had no problems installing it. My problem is my ISDN adapator, which is a pcbit-d by Octal! I just haven't found a way to get it to work with the new kernel or could it be the new ipppd verion? Can some good soul point me to a dial-up script for ipppd with PAP authentication?"
Hardware

Ask Slashdot: Wooden Chasis and EMF 196

Red Leader asks: "Hi. I'm writing in the hope that some electrical people will be able to help me out with the nitty gritty aspects of shielding a computer case. You see, I'm building myself a computer case out of wood. I have already built one, but it was merely a wood case (replacing the plastic) which overlayed a standard metal chassis. Well, that was too heavy, and I also want to use my own layout for the 'guts' of the box. So aside from heat, noise and grounding (which i've pretty much figured out) - I'm worried about the electromagnetic interference aspect of this new machine. It's most likely going to be a dual Celeron based Ultra-Wide SCSI2 system - which I think (!?!) will generate quite a large electromagnetic field. I've been thinking of shielding the case by lining it with this with copper fabric or something similar - but don't know how it sizes up to a solid metal case. Any help would be greatly appreciated - and I'll be sure to post pics of the case (well it's actually more than that) in progress and when completed.
Linux

Linux and SVHS Outputs 12

Gerr asks: "I'm looking into building a project that uses S-Video output to display a simple menu system onto a television/monitor (or going through a stereo to display output to a device). Are there any Linux projects currently working on S-Video or anyone in the world of Linux hacking who has some technical information about displaying information via this protocol? "
Linux

Machine Replication using a CD-R? 10

dfn_doe asks: "Is there an easy way to replicate a very large Linux install across multiple machines using a CDR as the transfer medium?? I have 9 boxes that need to have about 9 gigs of Web, Database, and other information spread across two drives and 10 partitions and I REALY don't want to do it manually. Any utilities? Any suggestions? In case anyone is interested this is for serving a large distributed database to a secure Web Server." Using a CDR? That's odd, if you have a newtork, you should be using that to automate installation as opposed to burning loads of CDs (not to mention the installation). What do you all think?
Linux

Ask Slashdot: Performance Monitoring for Linux 81

muadib wants to know about the following: "Given the current discussions on tuning, I am trying to find out if there are any performance monitoring applications for Linux. I don't mean things like xload, xosview, etc which provide only a small amount of data. For anyone who's done benchmarking under NT, I mean something like their built in perfmon utility that lets you view and capture just about any statistic on your system or on a remote system. Capturing is the specific functionality I'm looking for b/c I'm working on a Linux device driver, and it would be nice to have historical data of CPU utilization, interrupts/s, etc. so that I can compare complete system perfomance between code revisions."

Slashdot Top Deals