Coplan asks: "I'm a computer musician, and I have a couple of those drive-bay interfaces in my computer. While it is nice to have such cables and ports easily accessible, they can easily get in the way on the front of your case. Ideally, the ultimate case would be one where there were drivebays on the sides or the top of the case for this purpose (or even a special shaped case). I'm not into modifying my cases with dremel tools and the like, but I havn't exactly found a commercially available solution either. I believe that someone in the slashdot community might have similar needs, and might have found such a solution. Does anyone have any recommendations?"

fazzumar asks: "I've been checking out serial ATA (SATA) and it seems like it's got a lot of potential. The first generation spec was finalized August 2001 and members of the SATA group anticipate a 12-18 month acceptance period. They've planned for a cut-over phase and adapters that allow connecting SATA devices to ATA adapters and vice versa. The cables alone are a worthwhile advantage (4 pins, up to 1 meter in length), and the 150MB/sec bandwidth is a (minor) improvement over current ATA drives & adapters. Infoworld has a story on SATA that provides a few tidbits of information. What I really want to know is, will manufacturers of the new host adapters be able to integrate many of the advantages that SCSI provides or will the cost of adding these features push the retail cost too high for the anticipated market?" I just picked up a new WD Hard drive just yesterday for the planned MP3 jukebox I hope to be building near the end of the summer. I really wanted to go SCSI, but couldn't. While the poster claims a near ~7x in price difference, I saw about a ~5x difference in my local store. Is SCSI in danger of falling behind IDE drives (especially serial IDE drives) in popularity?

mcse_knowthyenemy asks: "I am cataloguing a HUGE private collection for a magician (No, we cannot waive a wand...) with an item count of at least 100k. The end result will be a searchable website. There are several Windoze packages that fit the bill (item data ad nauseum, image inclusion, reports, website). But these invariably requires numerous Microsoft products plus IIS. So, any input on a solution that is based on Apache, instead?" There are plenty of cataloguing and e-Commerce bases out ther that would work for this, one only has to perform a quick Freshmeat search to find them, however this being a museum, maybe there are better options? Would you use the already available software for this sitution or would you write something custom, instead?

Matthew Catalano, of the Dickson Supply Company, asks: "I work for a small plumbing, heating, irrigation, and BBQ supply house. Over the past four we have built up quite a website that houses tons of information and offers many products for sale via an online store. Recently a company known as PanIP has decided to sue us on 2 counts of patent infringement. To the best of my understanding, as you can see from their website, they claim that they invented the use of text and images as a method of business on the Internet. They also claim that they invented the use of a form to enter customer information. Obviously this is ridiculous and most likely won't hold up in court! However, this is not the problem. PanIP has also sued 10 other small companies. PanIP chose small companies because they hope that none of them can afford the legal fees that would ultimately remove their patents. Most defendants, including us, want to opt to bail out for a smaller licensing fee of $30,000. PanIP will continue this vicious cycle on small companies of which many of you may become victim of. Eventually they will have so many cases under their belt that they will be able to attack larger companies." Yet again, the USPTO is used as a weapon in the free market. When will someone get a clue and put a stop to this type of digital extortion?

Kymermosst asks: "Recently, this post was made to comp.sys.sun.misc, and sparked a large debate on the subject of usernames. What standardized user-naming schemes are used out in the 'real world,' if any? Has any company's scheme become a security risk due to its predictability? Were any benefits gained by using any particular system?"

ubergamer asks: "Logitech's Dual Optical boasts two 800dpi sensors taking 2000 shots a second, Microsoft's Explorer 3.0 only has a single sensor at 400dpi but takes 6000 shots a second. Then there's ofcourse the Razer Boomslang 2000 with a single 2000dpi sensor but is partially mechanical (dust argh!) So which is best for playing my favorite FPS?"

profBill asks: "I work in the area of complex adaptive systems, that is understanding the emergence of complexity from the interactions of many elements (immune systems, economies, ecosystems, etc.). In particular we are using evolutionary computation to create elements/creatures that can co-exist in an ecosystem with certain interactions and relationships. All that is very interesting, but in the end, assuming we create such creatures, I have to show them to the ecologists and biologists so they can understand what is going on. The only way I can imagine doing it easily, other than with graphs and charts, is to create a 2D animation of the creatures and their interactions that these folks can watch. My problem is that there are so many choices for a toolkit to build such a 2D animation. My goal is not a movie of ILM quality, but something 'good enough'."

MHQ13 asks: "We recently arranged with Sun for them to loan us one of their larger systems. The system is a Sun Fire 4800. Not a cheap machine. The system is mounted within its own 72" tall cabinet. It is shipped in a wood crate which is approximately 3' wide by 4' deep by 8' fall. Gross weight is about 900 pounds. Since their warehouse is just across the San Francisco Bay from us they contracted with a local carrier to ship it to us. The machine was picked up from their warehouse, placed into the truck and arrived at our receiving department a few hours later." And thus, the story begins. Read on for the conclusion of MHQ's Big Iron Shipping story and if you would, please share any anecdotes about mishaps that occured to expensive hardware that you or your company may have purchased.

Brian James asks: "I am sick to death of cordless phone batteries going dead at the drop of a hat. And with frequent recharging they tend not to hold much of a charge. Replacement often equals the cost of a new phone altogether... so what's the point? Ultimately I wish cordless phone manufacturers would design a phone that used standard rechargeable batteries, preferably with 2 battery bays and a switch that allowed you to switch over to the fresh set when one set starts to go dead (of course, I don't see this happening any time soon). Is there any way to modify a cordless phone such that I can run the handset off of standard batteries? I don't care how 'cheap and dirty' it ends up, I just need to know I can pop in a fresh battery and call the guy back, without waiting 8 hours for it to charge up." A few cordless phone manufacturers do have a clue. Some phones allow you to charge an extra battery in the base while the other is being used by the phone, which works well (I have a Sony 900Mhz model that does this). It would be interesting to see if someone has done what the poster has asked, however if you'd like to recommend a cordless phone that keeps downtime to a minimum, I'm sure such would be appreciated.

sansglitch asks: "Well, as the end of the academic year rolls around, I come before the Slashdot community to ask for a little help on a research project thats hopefully going to allow me to leave my sleepy suburban high school with a bang. Inspired by a 6th grader's science textbook, I have undergone construction on a Laser Harp (that is, a harp of sorts in which I've replaced the strings w/ beams of light). For the brain of this small midi-producing gadget, I've opted for a PIC micro-controller. I was hoping that someone with experience in dealing with this kind of chip setup might help with the finer points of integrating it into this monster. Do people still code for PIC's these days?" Now that is actually a cool idea for a project. Good luck with it, sansglitch!

RJ asks: "I know much about Java/C++ and sockets programming and I'd like to use this knowledge to build a distributed program to rip a DVD into DivX. It will work by breaking the job into chunks, sending chunks to other computers to encode, then patching it back together. Despite my searching efforts, I have been unable to find a decent resource to teach me how to program the DivX core to encode mpeg2 and re-join parts. I'm hoping that some readers of slashdot can point me in the right direction?"

Scott 'dolo' Leonard asks: "A while back, you might remember, I taught about 200 people in an IRC level design course, where students would complete a number of assignments for grading and grow with the course to meet their personal goals. Right now I am in the process of working up a proposal for my local college to get a game design course approved for Fall 2002. This course would hammer out the fundamentals of designing a game, what works and what doesn't. Before I begin, I was hoping that the community might have some input as to what they would want in a course of this nature."

customWorks asks: "I've been approached to write a piece of custom software for a small business owner with the promise of autonomy in its design and implementation. I do not intend to stick around for incremental development after I've delivered it, and so I feel strongly that open sourcing the software would be prudent for the both myself and prospective client. That said, I still expect to be paid for the developing the software. The issue of course is over convincing the client of the benefit of giving away the source to something they've just paid to have developed. I'd like to know if any of you who've done similar contract work have had experience (success?) in presenting an argument for open sourcing the end product? What were the major concerns/misperceptions that you had to overcome in making the case for open source?"

Dyrandia asks: "I'm currently working on a Legal and Ethics course for my software engineering degree and have decided to write about microsoft's tactics of buying up video games and companies in order to keep games limited to their own platforms (pc and xbox). I am currently using the following games as examples: Oddworld: Munch's Oddysee; Halo (Microsoft bought the developers, however rumour has it that Halo will actually make it to PC next year); and Shenmue 2 (they even bought the rights to it so that it couldn't be released for the Dreamcast in the US, even though it was released in Japan and Europe). Does anyone know of URLs for sites that would have more information and possibly other games Microsoft has used similar tactics on?"

FortKnox asks: "I, originally, asked this in my journal, but figured more people would have the same questions. As most coders, I'd eventually like to crack into the gaming industry. Yes, this is similar to an older AskSlashdot, but that was more about how someone going into college wants to get into the gaming industry. My question is how does a veteran computer professional crack into a designer job?"

Saqib Ali asks: "I was wondering if any Slashdot readers are accessing WebDAV folders on their Linux box. I heavily use DAV folders to store files and documents. On a Windows machine, I can easily access them using WebFolder or native DAV support in MS Office Suite. But when I switch to my Linux box, I have a hard time accessing the files on the DAV folders. I haven't seen any application on Linux that support DAV natively. OpenOffice/StartOffice don't support DAV either. I know there is nautilus which uses gnome-vfs to access files on DAV, but that doesn't help if the apps don't support DAV themselves. Are there Linux app that support DAV natively? How about integerating gnome-vfs into OpenOffice? Any ideas?" For those who just want access to the files, and don't mind the extra steps, you can use utilities like Cadaver but probably, what many of you might be looking for is a simple file system driver. What are you usin to access your DAV resources?

BRock97 asks: "After having made Linux the default desktop on my laptop, I have gotten into the mode of wanting to make all my desktops pretty, including my Win32 gaming machine. There are commercial programs out there (such as Object Desktop), but at a price tag of $50, I want to do a little more research before I toss down that chunk of change for eye candy, which leads to my question. Anyone use such freely available shell replacements such as geoshell or LiteStep? Comments on stability, speed, and such? The themes look impressive and the available modules (especially for LiteStep) looks extensive. For that matter, anyone use Object Desktop" Microsoft offers some UI tweaking tools, but I'm not aware of that many all-desktop replacements out there. Are any other projects in the works aside from the ones listed? How difficult are such projects to work on given Microsoft's attitude on control of the Win32 desktop?

smart2000 asks: "I'm tired of lugging around dead trees. I've just moved offices and had to move over 100 pounds of 'essential' technical books. It is clear to me that the dead tree industry is never going to supply the books I want in electronic form, so it's time to do it myself. What hardware and software should I use?"

Sean80 asks: "Recently, my company discovered that cultural aspects impact significantly on the expectations for a piece of software. For example, we found that the features which the Japanese would like differ markedly from those demanded in the US. In one particular instance, the Japanese market seemed far more demanding of functionality which dealt with quality issues. I am trying to find good books or other resources which address this issue. Are there any out there? What other areas of computing are impacted by cultural considerations? Should I consider these differences when building UIs, for example?"

anhinga asks: "I have recently talked my way into an assitant producer's position with the national public radio show 'City Visions,' a talk show on political issues from the s.f. bay area's perspective. For my first show, the producer i'm working with and i are putting together a show on the Open Source movement, working title: 'The Politics of Nerd.' The question is: which vocal, intelligent, bay area and vicinity OS insiders should be on the show?"