mcorliss asks: "I'm trying to convince my wife to switch from Windows to Linux. However, one program she loves is Broderbund's PrintShop, which I haven't found a Linux equivalent of yet. Does anyone know of such a product, preferably one that's free and fairly easy to use?" For banner creation, there's Gozer and AAType, but they aren't the easiest of things to use. Unless you consider The GIMP, software for designing greeting cards (another PrintShop specialty) seems to not have appeared for Unix. So is there an all-around equivalent for PrintShop for Unix users? If not, can you get close to that same functionality using a specific set of Open Source software? If it turns out neither of the first two questions produce encouraging answers, would anyone be interested in starting an Open Source project to fill this niche?

earlums25 asks: ""I'm a high school physics teacher stuck in a school where not only is Windows rampant, but the sysadmin isn't interested in alternatives. I want to present a case where my students could use Linux boxes instead of Windows for the purpose of showing them there are alternatives. The major obstacle is that I haven't found software for Linux that would take the place of 'Precision Timer,' a piece of software that allows students to connect photogates through a Pasco 6500 interface. The software would need to recognize the input signal which comes in through the Pasco interface (a 1/4 inch plug connected the gameport), record time, plot data, print/save data and plots, and do basic calculation of speeds, accelerations, averages and standard deviations. Any ideas?"

willo asks: "I recently built an on board computer for my Grand Cherokee. The initial uses for it include music, gps navigation, on board diagnostics and a baby cam so I can see how my kid is in that rear facing seat. After lots of research and testing, I'm really disappointed with the mapping software out there for Linux. Gpsdrive provides the basic functionality I need, but the street names are built into the image and are difficult to read at a glance while driving. Not to mention that it has to download the maps it needs ahead of time. Xastir can handle almost any map out there, but it reads through every map for each redraw! It also seems to lack the ability to zoom intelligently based on location. Note that it's not really designed to be a navigation aid, but rather a ham radio APRS tool. (I am a ham). Delorme Street Atlas USA does what I really want, but it's been a pain to make run properly under wine. Is anyone else out there working on a decent navigation application?"

starrynights asks: "I am planning to make an on-campus communication system and i need to find a free SMS Gateway. Can anyone give me any information on this?" Interesting thought. It might make an even better do-it-yourself type project. What would you need, aside from a computer with an internet connection, to build something like this on your own?

spoonist asks: "The vast array of available wireless protocols in the US is quite bewildering: CDMA, TDMA, GSM, AMPS. I spend most of my time in urban areas. Major providers appear to be rolling out GSM, so that seems like the way to go. I also spend a lot of time hiking and climbing in rural areas and like having my mobile phone in case of an emergency. My ancient analog phone gets a signal in all but the most remote of areas LONG after friends' digital phones loose their signals. Are there any dual mode mobile phones that can talk both GSM and AMPS? Also, I occassionally travel to Europe. From what I understand, GSM in the US uses a different frequency from the rest of the world (WHY!?!). Are there any phones that talk European GSM, US GSM, and AMPS?"

inblosam asks: "I am about to make 'the switch', but the thought came to me that there may be a strategic time of year to purchase technology goods. Of course once you buy something it is nearly outdated already, but there must be some marketing cycle for lowering prices and releasing new toys. Anyone seen any patterns that may help? I do have one hypothesis: Companies push their products that have been on the market for 10-11 months during the holiday season (December), then afterwards drop the prices some and bump up the product with a new feature or size, etc. I believe this was the case for the iPod ($500 down to $300 ?), and even the Handspring Visor Edge was $300 when I bought it (November?) and then $169 three months later."

StArSkY wonders: "I just had a quick look at the Team Slashdot page on the SETI site, and it looks as though only about 10% of the names are still active participants. Does Slashdot have limited patience? Have the Men In Black movies dulled our sense of commitment to the search for alien life? Or do we just rebuild our PC's too often and forget to reinstall the SETI client? For those of you who are interested, 'Team Slashdot' is currently ranked 27th in total results returned, and when I was typing this, we only needed another 6003 results to reach 1 million. Now that would be a huge achievement. So all of you Slashdotters out there with dormant SETI accounts get fired up, install the client, and get back to using those idle CPU cycles." not two days later, cybrpnk2 writes in with this update: "This week Team Slashdot becomes only the 28th registered group to process one million work units (basic blocks of radio data). Since the entire SETI@Home project has processed only around 600 million work units total, Slashdotters have made a pretty significant contribution to the overall project. Kudos to all involved, particularly slashdotter Mike Hardy for his team-leading contribution of over 23,000+ work units." A big hearty "Thanks!" to all current and future members of Team Slashdot. You guys rock!

Johann asks: "Our LUG has been fortunate to hold meetings for the past two years in a corporate-sponsored basement auditorium. The sponsor pays for us to use this room, which seats around 50-60 comfortably. We normally fill the room. We have an offer to move to a meeting room in a Radisson hotel at a highly-reduced rate. This room has many advantages over our current 'free' one, such as better handicapped and after-hours access, internet connectivity, better temperature control, and room for more people. The only problem: the members likely will have to bear the costs of this room ourselves. So, my question to other LUGs: Are you paying for your meeting space? If so, by what means? Donations? Sponsors? Passing-the-Hat? How have the members taken to paying for space?"

hellbunnie asks: "I work with a team of developers many of whom spend much of their time writing web-based front-ends for DBs or other applications. Now, while we enjoy programming, we're pretty lazy when it comes to testing. Even if we weren't so lazy, I think we'd still miss a number of problems, 'cos there's just so many different screens that use any particular method/function that you might change. That means there's a lot to be tested after each change. So, my question is has anyone any experience with automated systems for testing web applications?"

Clueless User asks: "Due to the lack of any wire based broadband solution in my area, I have been looking at using a CDMA2000 1x 3G wireless solution for Internet access. Verizon is offering an unlimited access solution over their cell network, and with a cell tower within visible distance of my home this seems almost feasible. Does anyone have any real life experience with CDMA2000 for home Internet access? (ie. gaming, P2P, large downloads, etc.) The only other option available is Satellite, but the high latency takes it off my list." This question basically boils down to which high latency solution has the least performance hit. Could you squeeze a faster-than-modem pipe thru such a link and have it be more cost effective than using a modem?

Nahdude asks: "A friend of mine and I tend to have frequent mini-LAN parties in odd places like diners or parks with our laptops. We've been using a crossover cable with no problems, but recently we've attracted some attention from friends, and even some strangers, who want in on the action. So I've looked (without success) for a portable networking solution. Has anyone found and had luck with a battery powered network hub? Keeping in mind that wireless, although neat, will probably be a bit difficult because the expense of mobile wireless cards could be out of range of a lot of the people interested (we had 15 people last week in a bar, woot, but only 2 player games with crossovers because they wouldn't let us plug in a hub)." I haven't seen many of these now, but maybe if someone plants the idea in people's heads we'll see these several years from now...

davidmcn asks: "There is an overabundance of solutions available for the Microsoft brand of operating systems which allow the mapping of zip-codes to congressional districts. However, I work for a small consulting firm that works primarily with Linux/Apache/PHP/MySQL, and would like to find a way to take address information, and create mailings based on Congressional Mappings. Does anyone know of a solution that is available for a linux enviroment? Even something as simple as a list of Congressional Districts and all zip codes underneath them would suffice."

DingleyDon asks: "I am currently administering a growing Unix environment and am interested in better documenting changes such as upgrades, software installs, configuration changes, etc. to the hardware and software on those servers from a SysAdmin's point of view. Obviously, this could be done with something as simple as a text file stored on each system, or a spreadsheet, or any other number of ways. But what I envision is a database app (web-enabled) where I can easily keep all of this information in a centralized location and query on the history of any given server. Is there any such package out there? (free=even better!) What do other SysAdmins use to document changes made to their environment?"

carambola5 asks: "Because we all know the world needs more inattentive drivers... I am a member of the champion UW-Madison FutureTruck team, which was the subject of this Slashdot report from June. Well, we're gearing up for next year and I'm on the sub-group that puts in all the cool interior stuff. Besides the Clarion joyride unit already in there, we're looking for other ideas (for example: a CF card that could act as both a key and remote access device for use in a handheld). What kind of little toys would you want in a car?"

An Anonymous Student asks: "I am a senior in college, majoring in computer science. I only need two more CS classes to finnish a BS. But all along I have also been taking math classes and find that I am only three classes away from a finishing a BS in math as well. (We normally take nine classes a year) So Here is the question to people out in the real world: Is it worth it to get a second degree? Do employers or grad schools care about that stuff? or should I just take fun random stuff in my last year as an undergrad?"

scubacuda asks: "I've mass deployed OpenOffice at work. Of the 40 computers running, ALL are running OpenOffice (only about 5 are running Microsoft Office in addition). I'm quite surprised at how well-received the deployment has been thus far: secretaries seem to be pleased with how well it integrates with Avery labels, it converts to/from Microsoft Office DOC/XLS files, etc. Have any other slashdotters implemented OpenOffice in an enterprise environment? If so, what have been the reactions from users and management?"

An anonymous reader asks: "Hi folks. Some advice please - I've been in university twice already and quit both times - the first due to lack of interest in the course and the second a combination of lack of interest and work pressures. The second time round, I started a tech company and it's now three years old and doing OK. I am now seriously thinking about going back to Uni to get a degree (for real this time ;-). Is anyone out there successfully juggling running a company and studying at the same time? How do you juggle the two without hampering either due to lack of the right amount of attention?"

anandsr asks: "Hi everybody, I am looking for a software that allows creating 3D models of house and furniture etc, to see how a house would look before building it, and populate it. What would you all recommend, are there any that amateurs can use." I've seen these in use in stores like Lowe's and Home Depot, but is there anything out there geared and priced for the home user?

Fascist Christ asks: "The company I work for, like many other companies, uses a fax machine. We get an annoying ammount of advertisements by fax and are looking to find an effective way to stop it. We have tried requesting to be removed from the lists, but we get too many to do this every time. One company told me that they get there info from infoUSA. Does anyone have any experience with this or other companies and know how to stop this activity without getting a lawyer involved?" How difficult would it be to set up a fax system that would use caller-ID blacklists before answering the line? At the very least you can block identifiable spammers by something that's harder to change than their email address: their phone number.

OtakuMan asks: "I am looking for a Bluetooth adapter so I can free up some of my USB slots. I have found many Bluetooth -> USB adapters, but I have not found any USB -> Bluetooth adapters. Any help?"