o2binbuzios writes "I have two pre-teen boys who are avid readers, and I am going through my mental catalog for great sci-fi & fantasy books for them. What are some of the classics (and maybe new additions to the classics) that would be great for them to read? I am asking because some of the 'straight-up' classics I remember actually seem kind of dark & cynical for younger readers. Starship Troopers and some of the other Heinlein are definitely darker and more political than I remember... Foundation Trilogy and psycho-history maybe too dry. Road-trip reading season is upon us — what are the good reads for the kids in the back seat?"

AC writes "Upper management of the company I work at recently declared that all new development should be done with a single combination of development tools, language, and framework. The main rationale is that people can be relocated from one group / project to another faster, because they don't need to learn a new environment when they switch. Of course the chosen language / framework used by everybody does not need to be the best tool for the job, but it should be good enough to allow every project to get done. What does Slashdot think about this? Is it OK to use the same development tools and language for every project, instead of choosing what fits best? Will the time saved be sufficient to offset the time lost to the 'not the best tool for the job' environment developers will be forced to use?"

Ben B writes "I'm working on an undergraduate degree in computer engineering in the US, and I'm a native English-speaking citizen. In fact, English is the only language that I know. Maybe it's not the same at other schools, but for the engineering program at mine, a foreign language is not required. If my plans are to one day be involved in research, is it worth my time to learn a foreign language? If so, which one?" Learning something new is almost never a waste of time, but how much energy have others found worthwhile to expend with all of the programming/math/tech type courses to be had at a large university?

CurtMonash writes "I was ego-surfing the other day, and was surprised to discover that I was listed as a member of an on-line dating service. It turns out these scamsters generate web pages for lots of (FirstName, LastName) combos, each claiming that the named individual is a member of their service. I posted about this, and discovered other people were upset, at least one had lost interest in a guy because he appeared to be a member, and so on. I've since followed up with lessons learned, a big one being that everybody should have a visible web presence. But frankly, the ideas I've come up with for fighting this kind of reputation scam seem fairly weak. Do Slashdotters have any better ideas?"

Bandman writes "My business just purchased a couple dozen blades, and with our existing servers, this brings us to around 60 machines. We're geographically dispersed, and most of the users who need to connect to servers are not technical (if that matters). We used to use theme-based naming schemes, but we've been migrating to a more utilitarian system. I think it's clearer and more concise, but I've had some feedback from users who didn't find it understandable. What do you use for your internal DNS schemes? How big is your network, and what do you recommend for future expansion? Does it matter to your users at all?"

"I have a lot of old video game magazines, they're nice for playing 'classic games' because a lot of classics are impossible without the manual, and hard without a magazine (the magazine obviously negates the need for a manual usually). But they'd get damaged with a flatbed scanner, and digital cameras are hard to set up right for capturing old magazines. I know that old documents are digitally archived with very high-res cameras..." So, the question is, what is the best way to capture all the information in old magazines in digital format? Does anyone have a home-built rig taking after the angled-pair-of-scanners setup that Project Gutenburg uses?

davidphogan74 writes "I have some stolen computers checking in with a server we have (software pre-loaded), and I have full access to the systems. What's the best way to deal with this situation? The local police (to the theft) have been contacted several times and seem to be clueless. I personally have no financial interest in these computers, I just don't like atom-thieves. What's the best way to handle knowing the IPs, email addresses, MySpace sites, the Google login, etc. when working with law enforcement? The officer I spoke with (who genuinely seemed to care) didn't know an IP address from a mailing address, so I called others. Nobody cared. Anyone have any ideas?"

akutz writes "I've had the flu since Tuesday afternoon. My wife picked me up from work with a temperature of 103.6 and it finally broke at 98.7 around 3am this morning. Yay. The problem is that I used my laptop during my periods of feverish deliriousness, contaminating my shiny 15" MacBook Pro with the icky influenza virus. I am asking my fellow Slashdotters if they have ever sought out a good way of disinfecting their lucky laptops after an illness. Do you use soap? A light acid bath? Just get the family dog to lick it until it looks clean?"

An anonymous reader writes "I recently graduated from a 'major' university in America with a BS degree in Computer Science. I unfortunately must admit that I am not very skilled with programming. I finished with the degree, and I've spent much of my college career working a job doing technical support (fixing laptops, troubleshooting Windows problems, etc). What jobs can I get with a computer science degree that are NOT mainly programming jobs? A little programming wouldn't be bad, but none would be preferred. And what kind of salaries do these jobs typically fetch?"

An anonymous reader writes "Currently, I'm running an old 4u Linux server for my private backup and storage needs. I could add new drives, but it's just way too bulky (and only IDE). For the sake of size and power efficiency I think about replacing it with a NAS solution, but cannot decide which one to get. The only requirements I have are capacity (>1.5TB) and RAID5. Samba/FTP/USB is enough. Since manufacturers always claim their system to be the best, I'd like to hear some suggestions from you Slashdot readers."

Theovon writes "I just built a high-end quad-core Linux PC dedicated to number-crunching. Its job is to sit in the corner with no keyboard, mouse, or monitor and do nothing but compute (genetic algorithms, neural nets, and other research). My issue is that I would like to have something like persistent terminal sessions. I've considered using Xvnc in a completely headless configuration (some useful documentation here, here, here, and here). However, for most of my uses, this is overkill. Total waste of memory and compute time. However, if I decided to run FPGA synthesis software under WINE, this will become necessary. Unfortunately, I can't quite figure out how to get persistent X11 session where I'm automatically logged in (or can stay logged in), while maintaining enough security that I don't mind opening the VNC port on my firewall (with a changed port number, of course). I'm also going to check out Xpra, but I've only just heard about it and have no idea how to use it. For the short term, the main need is just terminals. I'd like to be able to connect and see how something is going. One option is to just run things with nohup and then login and 'tail -f' to watch the log file. I've also heard of screen, but I'm unfamiliar with it. Have other Slashdot users encountered this situation? What did you use? What's hard, what's easy, and what works well?"

An anonymous reader writes "This is, I think, a simple question — but one which I can't get the answer to. As a typical, but perhaps high-demand home user I would like to use 2 separate ISPs. ADSL is pretty cheap nowadays, and 2 x ADSL seems a better value than one fast one — especially in terms of reliability. If one breaks, at least the other will work. Using an old box as a router/firewall, how can I configure a system to use two completely separate ISPs in a sensible manner? Ideally, I'd like the load of my browsing to be balanced, but at the minimum, I'd want some kind of 'fail-over.' If I leave torrents running over night, I'd like the router to use whichever connection doesn't block the traffic — and preferably for it to reset the errant connection. Ideas?"

Tjeerd writes "There is currently a discussion going on in the Netherlands about embryo selection. The process means that when using in vitro fertilization, you can check what kind of genetic defects will definitely become activated during life. When embryos with those defects are identified, they can be avoided or destroyed. The next step the government is considering is to make it possible to select against genetic defects which might become active in life, such as breast and colon cancer. Of course, this is a very difficult discussion; where do you start, and where do you end? People are worrying that there is no real limit, and that you could potentially check for every genetic defect. I think if you're in a situation where you or your family have genetic defects, you surely want to check whether your children would have them too. What does the Slashdot community think about this?"

cartman94501 writes "My wife and I use Vonage for Voice over IP at home, mainly for work-related phone calls so we don't have to give out our home number to clients and colleagues. Most of the time it works fine, but when I'm using BitTorrent or other high-bandwidth applications (purely for legal and non-copyright-violating purposes, of course), the call quality gets choppy. I have used my Linksys (not a WRT54G, so 'upgrading' it to Linux probably won't work) router's QoS feature to assign high priority to the MAC address of the Vonage box, low priority to the BitTorrent box, and medium quality to everything else, which helps a little, but not enough. Is there a router out there that would allow me to reserve, say, 75-90kbps of bandwidth off the top for VoIP and never, ever allow any application to use that, regardless of whether there's a VoIP call going on at the moment or not?" (More below)

afd100 writes "I work for a medium-sized company building embedded systems using C. As of yet, we do not have a great design methodology, but it is something we're working on. For the last 7 years now, we've been documenting our embedded software in an IEEE'esque Software Detailed Design, and using a very cryptic block diagram to explain our software. What does the embedded software community at large currently use to graphical represent their software or do they even try this? Since the programming is functionally decomposed, is UML the right way to go?"

UltraLoser writes "When is it acceptable to encourage users to accept a self-signed SSL cert? Recently the staff of a certain Web site turned on optional SSL with a self-signed and domain-mismatched certificate for its users and encourages them to add an exception for this certificate. Their defense is that it is just as secure as one signed by a commercial CA; and because their site exists for the distribution of copyrighted material the staff do not want to have their personal information in the hands of a CA. In their situation is it acceptable to encourage users to trust this certificate or is this giving users a false sense of security?"

Gori writes "I'm a researcher at a university. Our group mainly does Agent Based Modeling of interdisciplinary problems (think massive simulations where technology, policy, and economics meet). Recently, we managed to get a bunch of money for a High Performance Cluster to run our stuff on. The code is mostly written in Java. Our IT support people are very capable of setting up a stable cluster that will run Java perfectly. But where's the fun in that? What I'm trying to figure out are other, more far-out and interesting things to do with this machine — think 500+ Opteron cores, 2 GB RAM per core, a gigabit interconnect with some badass switches, a massive storage array, plus a bunch of UltraSPARC boxes. So at times when there's no stuff to crunch, I'd like to boot the thing up with a 'weird' system image and geek around in the name of science. Try fancy ways of building models, dynamically adding all sorts of hardware to it, etc. Have different schedulers compete for resources. Imagine a Matlab vs. Boinc vs. ProActive shootout. Maybe run plan9 on it? Most of us are not CE/CS people, but we are geeky enough. So, what would be the coolest and most far out thing you would do with this kind of hardware ?"

GeorgeMonroy writes "One of my clients has aperture cards that they have been scanning into multi-page PDF files — but now they want them in multi-page TIFFs instead. One of the reasons they gave for this is that TIFF files require less storage space. While that is true, I wonder if TIFF is the best format going into the future. Are TIFFs better than PDFs for future use? I wonder what format you think would last longer. Are there any other formats that you think would be better or more future-proof? To me, storage is not a good enough reason to go to TIFF, because storage prices are always dropping anyway. Also, since they already have many of these files in PDF format and they want to convert them into multipage TIFFs, are there any programs that you can recommend that will perform batch processing of files so that we do not have to convert each PDF one by one? If another file format is better than TIFF, then are there any programs for batch processing that you can recommend?"

Xeth writes "I'm a consultant with DARPA, and I'm working on an initiative to push the boundaries of neuromorphic computing (i.e. artificial intelligence). The project is designed to advance ideas all fronts, including measuring and understanding biological brains, creating AI systems, and investigating the fundamental nature of intelligence. I'm conducting a wide search of these fields, but I wanted to know if any in this community know of neat projects along those lines that I might overlook. Maybe you're working on a project like that and want to talk it up? No promises (seriously), but interesting work will be brought to the attention of the project manager I'm working with. If you want to start up a dialog, send me an email, and we'll see where it goes. I'll also be reading the comments for the story."

oncehour writes "I'm looking to broaden my horizons in terms of news, industry information, and generally good-to-know stuff. I've found a lot of great blogs and websites over the years, but I'm wondering what Slashdotters read regularly? What's in your RSS feeds?" We discussed this back in 2004, but the list of quality feeds has grown quite a bit in the past four years. Try to include at least a minimal description, so we know if we'll be looking at NASA news or up-to-the-minute cowboy boot fashion trends.