It's not like this hasn't already been tried and failed miserably. http://www.bbc.com/news/techno...
A quote from the article, "In August 2012 West Midlands Police said of 1,618 alerts produced by the system since November 2011, only two were confirmed gunfire incidents. What's more, the force added, ShotSpotter had also missed four confirmed shootings."

I've heard some people are having framerate issues running SLI, so no rush on fixing the fan.

OMG have you thought your question through? He got it from the article.

I hate to be the one to defend Facebook but they're doing nothing of the sort. If your post is flagged/reported by someone that reads it as selling a regulated product, not just a firearm, then the poster gets a notification reminding them to comply with applicable laws. The only thing they're really doing is interpreting statements like "no background check required" as a sign that the poster might be willing to help evade the law. They're not requiring the poster to perform a background check, they're just don't want the lack there of to be a selling point. This story is making a mountain out of an anthill.

I'm not saying I'd trust them either, but it is hard to determine how successful your program is if you don't get some kind of feedback. Seven years does seem excessive, but without knowing the results of the program, they can't modify it to be more effective.

Not only that, but if you're in an accident it's going to take even longer to get to a hospital.

- Ben Franklin 1775

The NFA was amended so you'd still be fine as long as you didn't cut it down to less than 16". But yes, constructive possession can be a very slippery slope.

Amazingly I got spam, I'm assuming because of this, just 5 minutes ago. Saying my profile picture is cute and they want to chat on yahoo messenger. Except for that fact that my picture is the retarded kid from the Stargate movie.

Rechargeable lithium-ion batteries, the most popular energy source for mobile electronic devices, are rapidly expanding their range of applications into fields such as electrical vehicles, grid energies, and flexible electronic devices.1 This strong market demand stimulates the need for development of advanced lithium ion battery technologies capable of improving energy storage densities, cycle life, charge/discharge rates, and design flexibility.2, 3

One strategy to address certain of these goals involves advanced structural design in the electrodes, along with associated new material development. For example, three dimensional (3D) electrodes can yield improvements in rate capability and capacity retention.4–6 These advantages are further enhanced in high-capacity anode materials, such as silicon and tin, which undergo large changes in volume during charge/discharge cycling.7, 8 One challenge for 3D electrodes, particularly in integration of active components, arises from difficulties in securing conformal electrolytes that can also prevent electrical shorts between electrodes.6 Although liquid electrolytes ensure excellent electrochemical performance and good physical contact with 3D electrodes, they suffer from potential leakage, leading to safety concerns. More importantly, liquid electrolytes limit choices in cell design due to their fluidic characteristics and the need for separator membranes in cell assembly. This situation motivates the development of self-supporting solid-state electrolytes that can conform to 3D electrodes and, at the same time, provide sufficient mechanical deformability for reliable use, especially for applications in flexible electronics and other demanding areas of envisioned use.

Among various solid-state electrolytes, gel polymer electrolytes (GPEs), which are generally composed of polymer matrix and liquid electrolyte, are widely used in lithium-ion batteries owing to their excellent ionic conductivity, low rates of safety failure, and mechanical flexibility.9–11 In general, conventional GPEs are prepared using a predesigned frame via solution casting of liquid state mixtures (i.e., liquid electrolytes and polymers dissolved in organic solvents or liquid electrolytes/polymerizable monomers), followed by solvent evaporation or chemical cross-linking for solidification. The initial, liquid-state, mixtures for GPEs have limited dimensional stability before solidification due to their intrinsically fluidic characteristics, thereby restricting their facile application to complex-structured systems such as 3D batteries.

To the best of our knowledge, there are no polymer electrolytes that are both shape-conformable to 3D electrodes and mechanically flexible without impairing their electrochemical performance. Moreover, it is still challenging to secure dimensional stability (as a solid form) of polymer electrolytes during electrolyte preparation and cell assembly process.6, 12

In the following, we demonstrate a facile and scalable approach to the fabrication of highly ion-conductive and bendable polymer electrolytes that can be also conformable to 3D micropatterned architectures of electrodes over large areas. These polymer electrolytes can also be directly writable or printable onto substrates of interest (including electrodes with complex geometries) due to well-tuned rheological characteristics. The materials are a kind of composite gel polymer electrolyte (hereinafter, referred to as “c-GPE”), composed of a UV (ultraviolet)-cured ethoxylated trimethylolpropane triacrylate (ETPTA) polymer matrix, high-boiling point liquid electrolyte (1M LiPF6 in ethylene carbonate (EC)/propylene carbonate (PC) = 1/1 (v/v)), and alumina (Al2O3) nanoparticles (Figure 1a). The ETPTA monomer, which contains trivalent vinyl groups that participate in UV-crosslinking,13, 14 serves as a mechanical framework (after UV-curing). The chemical structure of the ETPTA, along with 2-hydroxy-2-methyl-1-phenyl-1-propanon (HMPP, a photo-initiator), appears in Figure S1 in ESI. The Al2O3 nanoparticles are incorporated as a functional filler to control the rheological properties of the electrolyte mixture and enable direct printing on a substrate such as an electrode.

Figure 1. a) Conceptual illustration of an imprintable, flexible, shape-conformable c-GPE. b) Dripping characteristic of a liquid electrolyte that does not incorporate Al2O3 nanoparticles (designated as F-solution). c) Non-dripping behavior of UV-curable electrolyte mixture before UV-crosslinking reaction (designated as V-solution). d) Comparison of viscosity (as a function of shear rate) between the F- and V-solution.

As a control sample, an electrolyte mixture (hereinafter, referred as “F-solution”) comprised of the ETPTA monomer and liquid electrolyte without Al2O3 nanoparticles, was also cast onto an LiCoO2 cathode. Due to its fluidic character, the F-solution flows easily when it is vertically tilted (Figure 1b). By contrast, an otherwise similar solution with Al2O3 nanoparticles (hereinafter, referred as “V-solution”) is highly viscous and undergoes limited flow even before UV crosslinking (Figure 1c). Viscosity measurements reveal that the F-solution exhibits traditional Newtonian behavior, yielding a viscosity of 11 cP. The V-solution, on the other hand, shows a non-Newtonian response, (i.e., typical shear-thinning behavior), wherein the viscosity increases by 4 orders of magnitude as compared to the F-solution (Figure 1d). This unique rheological feature of the V-solution can facilitate its application in writable or printable electrolyte systems.

It should be noted that the rheological behavior of the V-solution depends strongly on composition ratio and dispersion state of the Al2O3 nanoparticles. Here, the Al2O3 content was varied between 33% and 80%, as determined by the amount of Al2O3 in total weight (= Al2O3 + ETPTA + liquid electrolyte) (See Figure S2 in ESI). Among the various compositions, an Al2O3 content of 66% was found to exhibit optimal rheological properties, for printing and comforming to complex-structured substrates.

Direct UV-assisted nanoimprint lithography (UV-NIL)15–18 was exploited to construct 3D shape-comformable polymer electrolytes from the rheologically tuned V-solution. The UV-IL technique is a well known, versatile patterning technology for production of diverse micro- and nanostructures for microelectronics, optoelectronic devices, and high-density magnetic data storage. Here, we used PDMS stamps for UV-NIL, featuring a maze-like structure with a repeating surface grating (wall thickness and height were 10 m, respectively) in 1.5 cm × 1.5 cm dimensions. We also explored silicon anode pillars on a rigid silicon wafer as columnar structure6, 19, of a type that is prefered for 3D electrodes designed to accomodate severe volume change during charge-discharge cycle. These two structures were used to investigate not only the applicability of polymer electrolyte on flexible and rigid substrates but also replication of round and angular patterns. PDMS stamps were formed using the casting and curing procedures of soft lithography with a master fabricated by exposure (365 nm UV mask-aligner; Karl-Suss) of photoresist SU-8 (Micro Chem) on a silicon wafer. Pressing such stamps against cast layers of V-solutions followed by UV exposure through the stamps yielded solid replicas while in contact (Figure 2a). A SEM image of a molded c-GPE with maze patterns demonstrates the high fidelity that can be achieved in this process, where the structures show well-defined vertical edge profiles and high mechanical stability (Figure 2b). A high-magnification, cross sectional SEM image shows that the Al2O3 nanoparticles are uniformly dispersed through the c-GPE (see Figure S3 in ESI).

Figure 2. a) Steps for fabricating an imprintable, bendable, and shape-conformable polymer electrolyte (c-GPE) via direct UV-assisted nanoimprint lithography (UV-NIL) b) A SEM photograph (surface) of a c-GPE with a maze-pattern (an inset is a cross-sectional image). c) Photographs demonstrating highly-bendable and twistable features of c-GPE. d) FT-IR spectra depicting acrylic C = C double bonds of V-solution (before UV-irradiation) and c-GPE (after UV-irradiation).

The mechanical bendability of the c-GPE as a self-standing film (thickness 150 m) was quantitatively measured using a bending test (under longituidinal strain ranged from 10 to 30 mm, strain rate = 10 mmmin1). The c-GPE offers strong resistance to mechanical breakage upon appreciable bending (bending radius 0.5 cm), even at a low concentration of polymer matrix (i.e., ETPTA/liquid electrolyte = 15/85 w/w). Also, the c-GPE retains dimensional stability until the 29th bending cycle. (Fracture occurs upon additional cycles, as in Figure S4 in ESI). The c-GPE was also mechanically stable under the twisting (bending radius 0.35 cm) (Figure 2c) deformations. Moreover, the maze patterns do not distort even after being subjected to five cycles of bending stress (bending radius 0.5 cm) (see Figure S5 in ESI), which reflects the excellent structural stability of the c-GPE.

The FT-IR measurements before and after UV-irradiation show that the characteristic peaks assgined to acrylic C = C bonds (1610 1625 cm1)13, 14 disappear (Figure 2d), which verifies that the crosslinking reaction is successfully completed in the c-GPE. This process was further confirmed by estimating the gel content of c-GPE, after solvent (dimethyl carbonate followed by acetone) extraction to remove the incorporated liquid electrolytes and any unreacted monomers.20 Over 99% by weight remained relative to the initial weight of UV curable monomer. This result verifies that the UV-curing reaction of ETPTA monomer in the c-GPE was nearly complete. The solid electrolyte characteristics (electrochemical stability, ionic conductivity, and cell performance) of the c-GPE are examined. Linear sweep voltammograms indicate that no significant decomposition of any components in the c-GPE takes place below 4.5 V vs. Li/Li+. This high anodic stability suggests potential for application to high-voltage lithium-ion batteries (Figure 3a). Figure 3a shows that the ionic conductivity of the c-GPE is more than 103 S cm1 at room temperature, with values that increase with temperature. Another advantageous feature of the c-GPE is that no weight loss is observed below temperature of 100 C, as observed from the TGA result due to the presence of high-boiling point liquid electrolyte (i.e., 1M LiPF6 in EC/PC) (Figure 3b).

Figure 3. a) Electrochemical stability window for a c-GPE (an inset shows temperature-dependent ionic conductivity of c-GPE). b) TGA profiles showing difference in thermal stability compared to a conventional carbonate-based liquid electrolyte (1M LiPF6 in EC/DEC = 1/1 v/v) and c-GPE. c) Charge/discharge profiles of a cell (lithium metal/flat-shaped c-GPE/LiCoO2 cathode) as a function of cycle number (at a constant charge/discharge current density = 0.5 C/0.5 C under a voltage range of 3.0–4.2 V). d) Cycling performance (= capacity retention with cycling and coulombic efficiency of a cell, lithium metal/flat-shaped c-GPE/LiCoO2 cathode).

Cycling performance of the cell (LiCoO2 cathode/c-GPE/lithium metal anode) was examined using a flat c-GPE film, where the cell was cycled between 3.0 and 4.2 V at a constant charge/discharge current density (= 0.5 C/0.5 C). The cell exhibits highly stable charge/discharge profiles up to the 50th cycle (Figure 3c). In addition, the couloumb efficiency is 97%, thereby contributing to the negligible capacity loss during cycling (Figure 3d).

To explore the feasibility of applying the c-GPE to 3D- electrodes, cells were prepared using silicon anodes that are patterned into arrays of columns supported by similarly structured copper on a silicon wafer. The fabrication involved sputter deposition of silicon to a thickness of 40 nm onto the copper in pillars with heights of 18 m,21 where the electrode area is 0.9 cm × 0.9 cm. The electrode was incorporated into a cell that employs lithium metal as the counter electrode and c-GPE as the solid electrolyte (see Figure S6 in ESI). As shown in Figure 4, an inverse replica of the 3D silicon structure is successfully formed in the c-GPE, allowing good contact with the anode. Analysis of the SEM images (Figure 4c) shows that the imprinted c-GPE has a height (18 m) and radius (153 m), well matched with the dimension of the 3D silicon anode.

Figure 4. a) Charge/discharge profiles of a cell comprising a 3D Si anode/c-GPE/lithium metal as a function of cycle number (at a constant charge/discharge current density = 0.5 C/0.5 C under a voltage range of 0.01–1.5 V). b) A SEM photograph of a 3D pillar (height = 18 m, radius = 153 m) structured current collector. c) A SEM photograph (surface) of inversely-replicated c-GPE (i.e., after being detached from the 3D pillar structured Si anode), where the inset is a cross-sectional image. d) A SEM photograph (surface) of an inversely-replicated c-GPE disassembled from a cell after the 10th cycle of operation (the inset is a cross-sectional image).

Figure 4a shows the cycling performance of the cell (Si anode/c-GPE/Li metal) using inversely-replicated c-GPE as an electrolyte, where the cell was cycled between 0.01 and 1.5 V at a constant charge/discharge current density (= 0.5 C/0.5 C). The cell shows capacity loss due to SEI (solid electrolyte interphase) layer formation at the first cycle and gradual capacity decay afterwards. This charge/discharge behavior of the cell is similar to the previously reported results for 3D Si anodes.22 From a calculation based on the 40 nm thickness silicon, the initial charge (i.e., lithiation of silicon anode) capacity is found to be 2680 mAh g1. Although the capacity retention with cycling is not ideal, because the 3D-structured cells are not optimized, the overall cycling performance is promising compared to that of c-GPE with non-optimized Al2O3 content. Moreover, Figure 4d shows that the inversely-replicated structure of the c-GPE is almost unchanged, even after the 10th cycle, compared to the initial shape (Figure 4c). This result demonstrates dimensional stability in the imprinted c-GPE and verifies the successful application of the shape-conformable c-GPE to the 3D-structured cells. It also suggests that the good cycling performance in the optimized c-GPE formulation results from its outstanding imprintability, shape conformability, flexibility, and electrochemical performance. These attributes can facilitate the development of 3D-structured battery systems.

Figure 5 shows that Al2O3 content of 33% (or 80%) leads to unsuccessful integration on 3D Si anodes due to non-optimized rheological properties, consistent with the previous result (Figure S2). It should be noted that the structure of the imprinted c-GPEs has a significant influence on the cell performance. For instance, c-GPE with Al2O3 content of 33%, where the c-GPE exhibits highly fluidic characteristic, most of the 3D Si anode remains uncoated. As a result, no meaningful charge/discharge reaction is obtained, likely due to internal short-circuit between the anode and cathode. For c-GPE with Al2O3 content of 80%, the Al2O3 nanoparticles agglomerate, and the c-GPE does not completely cover the 3D Si anode. The mechanical compliance diminishes, and large-sized pinholes and cracks appear. Due to this non-uniform morphology of the imprinted c-GPE, the cell assembled with the c-GPE does not provide normal charge/discharge behavior. More specifically, excessively large charge capacity and very low coulombic efficiency ( 9%) at the 1st cycle are observed. The cell in this case might be partially internally short-circuited due to the poorly-imprinted c-GPE on the 3D Si anode.

Figure 5. Charge/discharge profiles of a cell comprising 3D Si anode/non-optimized c-GPE/lithium metal as a function of cycle number (at a constant charge/discharge current density = 0.5 C/0.5 C): (a) Al2O3 content = 33%; (b) Al2O3 content = 80%.

In summary, we successfully fabricated highly ion-conductive, bendable polymer electrolytes that are also conformable to 3D micropatterned architectures of electrodes over large areas. More notably, the polymer electrolytes can be directly writable or printable onto complex, contoured substrates, owing to the structural uniqueness and well-tuned rheological characteristics. A persistent challenge in the development of 3D-structured or flexible batteries is in the maintenance of good contact between polymer electrolytes and electrodes, to facilitate electrochemical reaction at the interface. In this respect, the polymer electrolytes introduced here can be important.

Those most be some really expensive cigarettes then.
"The coveted rifles they fled with from the Syrian military, worth at least $4,000 each on the black market, hang on nails driven into a dirty white wall."

Actually, provided it's a rifle or a shotgun it's perfectly legal as long as the laws of both states are followed. http://www.atf.gov/firearms/faq/unlicensed-persons.html#gca-unlicensed-acquire

Close, you're thinking of DGPS. WAAS is satellite based, just like EGNOS.

I have to say, Midco is amazing compared to what I had available in NJ. I'm getting 30/5 here for less than I would have gotten 10/1 from PTD back home.

That wasn't a whoosh, it was more like a http://www.youtube.com/watch?v=k4f3vJjvR9c