Well, I suppose it's better than dailymail.co.uk, at least...

But anyway, I am not familiar with the history of the author of the articles I posted, so I apologize if I posted the ravings of a nutter. I do plan to read more on the subject of the data adjustments; it's just something that struck me as suspiciously peculiar when I first heard of it very recently.

Please forgive this self-reply. I meant to link to this article, with some interesting graphs of raw vs. adjusted temperature data.

Do actual measurements show a steadily increasing temperature, or is this trend just visible in adjusted measurements? I do not pretend to understand all of the intricacies involved to call foul just yet, but I'd sure like to understand these alleged adjustments better. Are they valid and accurate, or are they just manipulations of the data to present a desired but incorrect result?

Wow, that's really awful. I knew that I was giving up modern conveniences like good unlimited data connectivity and paved roads when I moved out this property, and consider that the price of living on acreage that I can afford in California. But I'm really surprised to hear that somebody in a developed area would have the same connectivity problems that I have!

As somebody living in a just-barely-rural fringe area that's not densely populated enough to get even cable service, a bit too far from the switch for DSL, and where a cell modem is my only practical so-called broadband access, Comcast is welcome to call me all the dirty names they like if it induces some other company to pull fiber out to me. :)

I don't think that birdshot is dangerous on the way back down, unless a pellet falls right into your upturned eye. It has enough kinetic energy to harm a bird (or fragile drone) within some range of the shooter, but by the time it comes back down it has slowed to terminal velocity. Birdshot is only around a millimeter in diameter, like coarse sand. The "pebble-like-stuff" would be buckshot, which would not be practical to use against a bird/drone because not many pellets of that shot fit in a shell, making it pretty hard to actually hit a flying target with at least one pellet.

Despite the relative safety of falling birdshot, firing guns into the air in urban settings is generally frowned upon. :)

For the case of using the default card in Apple Pay vs. using a single NFC card in the outer pocket of a wallet, it seems to me that they take the same amount of time and effort. In either case, it's a matter of taking a similarly-sized item out of a pocket or purse, holding it against the reader for a moment, then replacing it in the pocket or purse. In the Apple Pay case, the user needs to rest a registered thumb or finger against the thumbprint reader (which is integrated into the home button), but doing so is probably already a reflexive move whenever taking the device out of a pocket or purse since that is how you unlock the device anyway. It's not necessary to manipulate any other buttons, look at the screen, or touch the screen in order to use the user-specified default card, and the phone generates a short vibration after the NFC transaction completes for haptic feedback.

What if you have multiple NFC-enabled cards that the reader might accept? How do you determine which one to use? I think you'll need to take the desired card out of your wallet then to separate it enough from the others. With Apple Pay, you flip through the list of cards on the screen if you want to use a different one than the default. Whether that's faster or not might vary depending on how you carry your cards. I only have one of my cards set up for Apple Pay right now, so I haven't tried it yet.

73 de NF6X

It's faster and easier to pull my phone out of my pocket with one hand, hold it up against an NFC reader for a moment, then put it back in my pocket than it is to pull my wallet out of my pocket, open it, take out my credit card with my other hand, swipe it, put it back in my wallet, put my wallet back in my pocket, and sign a receipt or signature pad.

The minor improvement in convenience isn't what excites me about Apple Pay, though. The increased security over using magstripe cards is.

If FTDI provided a standalone counterfeit detection tool that manufacturers could use at final test or just as a spot check, then that could be helpful for conscientious designers/manufacturers like you or me who might find fake chips in our supply chain and then be really angry about that. We want to discover the problem before our finished goods end up in our customer's hands! It wouldn't address the problem of manufacturers who knowingly use fake parts or who just don't care, but it would be a step in the right direction. Deliberately and silently borking the fake chip after it's already in the end user's hands potentially causes a support burden for legitimate manufacturers of products using FTDI chips, without giving those manufacturers the information they need to constructively address the problem.

They certainly don't have to ensure that their drivers don't accidentally break chips that aren't theirs. The problem here is that they deliberately broke chips that aren't theirs. If their driver refused to service chips identified as counterfeits, that would be fine, with the caveat that they risk angering their real customers if there are false positives in their counterfeit detection method. If the driver also informed the user that the chip was a fake, that would be much better. But by intentionally borking the chip, they may well have violated laws, and they certainly created a serious trust issue with both end users (like me) and engineers who may reevaluate whether to design in FTDI parts (like me).

With FTDI's announcement that they've seen the error of their ways, I'm cautiously optimistic that I will be able to continue using their parts in my designs. I am interested in addressing the real problem of counterfeit parts, but let's do so in a manner which doesn't target the wrong parties. Silently bricking finished goods bought by unsuspecting end users isn't very constructive, even though I can see how it was very tempting. Their previous statement that users should make sure that they buy their FTDI parts only from authorized distributors suggests to me that FTDI was buried too deep in their frustrating problem of countering the counterfeiters, and that they thus lost sight of the overall problem. End users of finished goods generally have no way of knowing what parts are in their products or where they came from, so a scheme which directly targets them is missing the point and just causes more problems.

If that bothers you, then definitely avoid clicking any links on The Worst Things for Sale. The recommendation algorithm doesn't automatically discriminate between things you might want to buy vs. things you looked at for shock or humor value. Thanks, Amazon, but I don't need a 55 gallon drum of personal lubricant at the moment.

Thank you. I do need correction to see the target at all, particularly at rifle ranges, because I've been nearsighted since at least junior high school. I suppose that once I get bifocals or progressive lenses (probably at my next eye exam), I'll need to learn to find the target first through the long-distance part of the lens, then shift to the near-distance part to focus the sights on the correct blur. I haven't gone shooting since I started to notice the onset of farsightedness, but I can still see well enough at front sight distance without correction. But now I need magnifying glasses to focus on small things like PCB features up close, which is pretty annoying. It's not just that the PCB features are getting smaller I've begun playing around with vintage computers recently, and I even have trouble focusing on the old through-hole stuff now without external optics.

Yes, my thinking has been the same. Wearing eyeglasses is annoying, but I'm risk-averse, and I only get one pair of eyes per life barring some really cool future technical advancement.

I'm also 45 and I'm experiencing the same thing. I am overdue for a new set of glasses anyway, but I've noticed my new farsightedness the most when doing work on the test bench. I've had to start using a set of head-mounted magnifying lenses regularly for close-up work. If I was to consider some sort of corrective procedure, I'd need something that's compatible with close-up hands-on work, staring at a computer screen most of the time, and shooting which requires both close-up vision (to see the signs) and long range vision (to see the target). I haven't researched yet whether any of the existing procedures would be a good option for a person of my age with my vision and range of activities.

I had a similar experience canceling XM several years ago.