Best Thermal Analysis Software in Germany

Azore is software for computational fluid dynamics. It analyzes fluid flow and heat transfers. CFD allows engineers and scientists to analyze a wide range of fluid mechanics problems, thermal and chemical problems numerically using a computer. Azore can simulate a wide range of fluid dynamics situations, including air, liquids, gases, and particulate-laden flow. Azore is commonly used to model the flow of liquids through a piping or evaluate water velocity profiles around submerged items. Azore can also analyze the flow of gases or air, such as simulating ambient air velocity profiles as they pass around buildings, or investigating the flow, heat transfer, and mechanical equipment inside a room. Azore CFD is able to simulate virtually any incompressible fluid flow model. This includes problems involving conjugate heat transfer, species transport, and steady-state or transient fluid flows.

Energy2D, a multiphysics simulation program based on computational physics and combining particle dynamics, models all three modes for heat transfer: conduction, convection and radiation. Energy2D runs fast on most computers, eliminating the need to switch between preprocessors and solvers and postprocessors that are usually required for computational fluid dynamics simulations. It allows you design "computational experiment" to test a hypothesis or solve a problem in engineering without resorting complex mathematics. There are also plans to support different fluid types and incorporate other types energy transformations. Energy2D's conduction is very accurate, but its convection and radioactivity parts are not. Energy2D should therefore be considered qualitative in cases involving convection and/or radiation. Energy2D has been used in more than 40 scientific publications.

Simcenter Flotherm, with its 34 years of development, user feedback and extensive experience in electronic cooling simulations for thermal analysis, is the leading software solution. It accelerates development from IC packages, PCBs, and enclosures to large systems, such as data centres. Fast, accurate CFD simulations of electronics cooling can improve electronics thermal management and reliability from the initial pre-CAD exploration through to final verification. Simcenter Flotherm is a tool that integrates into the electronics development workflow to allow thermal engineers to run simulations, and to provide accurate results in a timely manner. It also provides feedback to other engineering functions. It supports thermal management and simulation-based decisions from early-stage architectural to final thermal design validation. This helps reduce development time and eliminates the risk of expensive reliability-related warranty costs, or any late-stage respins.

Pyris™, the benchmark for high-sensitivity thermal analyses, brings your PerkinElmer thermal instruments and data to life. Pyris, the most popular choice for thermal analysis, is user-friendly and intuitive. It also offers a variety of standard features to maximize flexibility. Pyris is the perfect software for any application, whether it's a fully automated research lab, an automated QA/QC laboratory, or a standalone instrument. Pyris software is constantly improved based on feedback from customers to ensure maximum user satisfaction. A common platform for the instruments makes it simple to use and easy to learn. Pyris software is simple to use, but does not lose its capabilities. The software allows you to run multiple analyzers at the same time and conduct data acquisition and analyses in one window. Data import/export flexibility and a wide range of analytical options.

6SigmaET is an electronic thermal modeling tool that uses advanced computational Fluid Dynamics (CFD), to create precise models of electronic equipment. Our thermal simulation software is specifically designed for electronics. It offers unparalleled intelligence, automation, and accuracy to help you meet all your requirements and overcome any thermal design challenges. 6SigmaET is the fastest-growing thermal simulator software in the electronics cooling market since its inception in 2009. 6SigmaET's versatility allows you to simulate the thermal performance electronic components, from the smallest ICs up to the most powerful servers. Watch one of our videos to learn more about 6SigmaET's benefits for your industry. Or, browse our case studies. You can import the entire CAD geometry and PCB designs into 6SigmaET to perform thermal analysis. This will reduce the time it takes to create models.

AnyCasting Software has been a leading simulation program for castings for over 20 years. We are currently working with companies that manufacture automobiles, ships and heavy material industries. We have sold over 600 copies in the world and solved and provided technical consulting on over 470 projects. AnyCasting offers stress analysis that can be used to simulate deformation, heat and stress analysis. It can also help users design the best mold by providing automatic mold designing. Hyundai Motors and Hyundai Heavy Industries are among the domestic customers who have been satisfied. Identify the location of gas defect caused by the isolation air during the filling process and flow of the melt. Our software locates defects by comparing air pressure to the pressure in the melt.

Take advantage of the power of thermal analysis for natural solidification in a software package that is affordable and capable. CAPlite has a simple, step-by-step graphical user interface that is ideal for anyone who does not have experience with casting software. CAPlite takes you from a CAD model through to the post-processing. Natural solidifications provide results in minutes. CAPlite can identify casting problems in all types of castings, from die casting to sandcasting. Natural solidifications are easy to use and can be used to enhance your entire casting process at any stage. They can help identify defects or visualize the otherwise abstract solidification process. CAPlite gives you the power of natural sinterings and more, allowing you to improve your castings for a fraction of their cost.

CoTherm, a coupling software and process automation program, acts as a liaison between CAE programs. CoTherm simplifies process automation. It can be used to run sensitivity studies, design of experiments or multiple CAE models in a single process. This capability can streamline preprocessing, thermal analysis or transient analysis. CoTherm provides templates for common coupling and automation tasks. CoTherm has optimization capabilities to determine the best inputs for your design. The general optimization sub-processes can be used to optimize any CAE analysis. CoTherm’s mathematically rigorous solution, including multiple global and local methods, removes guesswork from your design process. CoTherm supports a wide range of thermal and CFD code. CoTherm’s powerful tools enable the coupling of any program that can be run from the command line or config files.

Simcenter MAGNET provides a powerful electromagnetic simulation solution to predict the performance of motors and generators. It can also be used for predicting the performance of sensors, transformers. actuators, solenoids or any other component with permanent magnets. Simcenter MAGNET allows you to predict the performance of any part with permanent magnets or coils. Simulate low-frequency electromagnetic fields. Simcenter MAGNET has the ability to accurately model electromagnetic devices. This includes the ability to model manufacturing processes, temperature-dependent material properties, magnetization and de-magnetization modeling, and vector hysteresis models among others. Simcenter MAGNET also has a built-in motion solver with a six-degree-of-freedom capability. It allows complex problems such as magnetic levitation and complex motions to be accurately modelled and analyzed. A unique smart remeshing technology makes this possible.

Our STARe software sets the standard for thermal analysis. It offers virtually limitless evaluation options. Modularity, flexibility and automation are some of its unique features. The software helps you stay compliant in a regulated field. All of our thermal systems can be controlled by a single powerful software platform. We offer the most comprehensive line of thermal systems and instruments. Our thermal analysis software, STARe, is easy to use and powerful. The instruments receive measurements and experiments, and the curves are evaluated instantly based on user preferences. STARe is the industry standard in thermal analysis software. It is a software that is extremely flexible and offers almost limitless possibilities for evaluation. STARe is the comprehensive software that powers METTLER TOLDEO’s thermal analysis systems. It simplifies workflows.